+// ----------------------------------------------------------------------------
+// non GUI features selection
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
+// integer which is implemented in terms of native 64 bit integers if any or
+// uses emulation otherwise.
+//
+// This class is required by wxDateTime and so you should enable it if you want
+// to use wxDateTime. For most modern platforms, it will use the native 64 bit
+// integers in which case (almost) all of its functions are inline and it
+// almost does not take any space, so there should be no reason to switch it
+// off.
+//
+// Recommended setting: 1
+#define wxUSE_LONGLONG 1
+
+// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
+// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
+//
+// Default is 1
+//
+// Recommended setting: 1 (wxFile is highly recommended as it is required by
+// i18n code, wxFileConfig and others)
+#define wxUSE_FILE 1
+#define wxUSE_FFILE 1
+
+// Use wxFSVolume class providing access to the configured/active mount points
+//
+// Default is 1
+//
+// Recommended setting: 1 (but may be safely disabled if you don't use it)
+#define wxUSE_FSVOLUME 1
+
+// use wxTextBuffer class: required by wxTextFile
+#define wxUSE_TEXTBUFFER 1
+
+// use wxTextFile class: requires wxFile and wxTextBuffer, required by
+// wxFileConfig
+#define wxUSE_TEXTFILE 1
+
+// i18n support: _() macro, wxLocale class. Requires wxTextFile.
+#define wxUSE_INTL 1
+
+// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
+// allow to manipulate dates, times and time intervals. wxDateTime replaces the
+// old wxTime and wxDate classes which are still provided for backwards
+// compatibility (and implemented in terms of wxDateTime).
+//
+// Note that this class is relatively new and is still officially in alpha
+// stage because some features are not yet (fully) implemented. It is already
+// quite useful though and should only be disabled if you are aiming at
+// absolutely minimal version of the library.
+//
+// Requires: wxUSE_LONGLONG
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_DATETIME 1
+
+// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not
+// the same as wxDateTime!). These classes are obsolete and shouldn't be used
+// in new code
+//
+// Default is 0
+//
+// Recommended setting: 0 unless you have legacy code which uses these classes
+#define wxUSE_TIMEDATE 0
+
+// Set wxUSE_TIMER to 1 to compile wxTimer class
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_TIMER 1
+
+// Use wxStopWatch clas.
+//
+// Default is 1
+//
+// Recommended setting: 1 (needed by wxSocket)
+#define wxUSE_STOPWATCH 1
+
+// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
+// which allow the application to store its settings in the persistent
+// storage. Setting this to 1 will also enable on-demand creation of the
+// global config object in wxApp.
+//
+// See also wxUSE_CONFIG_NATIVE below.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG 1
+
+// If wxUSE_CONFIG is 1, you may choose to use either the native config
+// classes under Windows (using .INI files under Win16 and the registry under
+// Win32) or the portable text file format used by the config classes under
+// Unix.
+//
+// Default is 1 to use native classes. Note that you may still use
+// wxFileConfig even if you set this to 1 - just the config object created by
+// default for the applications needs will be a wxRegConfig or wxIniConfig and
+// not wxFileConfig.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG_NATIVE 1
+
+// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
+// to connect/disconnect from the network and be notified whenever the dial-up
+// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DIALUP_MANAGER 1
+
+// Compile in classes for run-time DLL loading and function calling.
+// Required by wxUSE_DIALUP_MANAGER.
+//
+// This setting is for Win32 only
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DYNLIB_CLASS 1
+
+// experimental, don't use for now
+#define wxUSE_DYNAMIC_LOADER 1
+
+// Set to 1 to use socket classes
+#define wxUSE_SOCKETS 1
+
+// Set to 1 to enable virtual file systems (required by wxHTML)
+#define wxUSE_FILESYSTEM 1
+
+// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_ZIP 1
+
+// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_INET 1
+
+// Set to 1 to compile wxZipInput/OutputStream classes.
+#define wxUSE_ZIPSTREAM 1
+
+// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
+// wxUSE_LIBPNG.
+#define wxUSE_ZLIB 1
+
+// If enabled, the code written by Apple will be used to write, in a portable
+// way, float on the disk. See extended.c for the license which is different
+// from wxWindows one.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you don't like the license terms (unlikely)
+#define wxUSE_APPLE_IEEE 1
+
+// Joystick support class
+#define wxUSE_JOYSTICK 1
+
+// wxFontMapper class
+#define wxUSE_FONTMAP 1
+
+// wxMimeTypesManager class
+#define wxUSE_MIMETYPE 1
+
+// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
+// or wxURL you need to set this to 1.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_PROTOCOL 1
+
+// The settings for the individual URL schemes
+#define wxUSE_PROTOCOL_FILE 1
+#define wxUSE_PROTOCOL_FTP 1
+#define wxUSE_PROTOCOL_HTTP 1
+
+// Define this to use wxURL class.
+#define wxUSE_URL 1
+
+// Support for regular expression matching via wxRegEx class: enable this to
+// use POSIX regular expressions in your code. You need to compile regex
+// library from src/regex to use it under Windows.
+//
+// Default is 0
+//
+// Recommended setting: 1 if your compiler supports it, if it doesn't please
+// contribute us a makefile for src/regex for it
+#define wxUSE_REGEX 1
+
+// wxSystemOptions class
+#define wxUSE_SYSTEM_OPTIONS 1
+
+// wxWave class
+#define wxUSE_WAVE 1
+
+// ----------------------------------------------------------------------------
+// Individual GUI controls
+// ----------------------------------------------------------------------------
+
+// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
+// (without it, wxControl class is not compiled)
+//
+// Default is 1
+//
+// Recommended setting: 1 (don't change except for very special programs)
+#define wxUSE_CONTROLS 1
+
+// wxPopupWindow class is a top level transient window. It is currently used
+// to implement wxTipWindow
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
+#define wxUSE_POPUPWIN 1
+
+// wxTipWindow allows to implement the custom tooltips, it is used by the
+// context help classes. Requires wxUSE_POPUPWIN.
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0)
+#define wxUSE_TIPWINDOW 1
+
+// Each of the settings below corresponds to one wxWindows control. They are
+// all switched on by default but may be disabled if you are sure that your
+// program (including any standard dialogs it can show!) doesn't need them and
+// if you desperately want to save some space. If you use any of these you must
+// set wxUSE_CONTROLS as well.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_BUTTON 1 // wxButton
+#define wxUSE_BMPBUTTON 1 // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
+#define wxUSE_CHECKBOX 1 // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHOICE 1 // wxChoice
+#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_LISTBOX 1 // wxListBox
+#define wxUSE_LISTCTRL 1 // wxListCtrl
+#define wxUSE_RADIOBOX 1 // wxRadioBox
+#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_SCROLLBAR 1 // wxScrollBar
+#define wxUSE_SLIDER 1 // wxSlider
+#define wxUSE_SPINBTN 1 // wxSpinButton
+#define wxUSE_SPINCTRL 1 // wxSpinCtrl
+#define wxUSE_STATBOX 1 // wxStaticBox
+#define wxUSE_STATLINE 1 // wxStaticLine
+#define wxUSE_STATTEXT 1 // wxStaticText
+#define wxUSE_STATBMP 1 // wxStaticBitmap
+#define wxUSE_TEXTCTRL 1 // wxTextCtrl
+#define wxUSE_TOGGLEBTN 1 // requires wxButton
+#define wxUSE_TREECTRL 1 // wxTreeCtrl
+
+// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
+// below either wxStatusBar95 or a generic wxStatusBar will be used.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_STATUSBAR 1
+
+// Two status bar implementations are available under Win32: the generic one
+// or the wrapper around native control. For native look and feel the native
+// version should be used.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (there is no advantage in using the generic one)
+#define wxUSE_NATIVE_STATUSBAR 1
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
+// supports some features which might not be supported by the native wxToolBar
+// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
+// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
+#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
+#define wxUSE_TOOLBAR_SIMPLE 1
+
+// this setting is obsolete, value is ignored
projects / wxWidgets.git / blobdiff