/////////////////////////////////////////////////////////////////////////////
-// Name: setup.h
+// Name: wx/os2/setup.h
// Purpose: Configuration for the library
// Author: Julian Smart
// Modified by:
#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_
+/* --- start common options --- */
// ----------------------------------------------------------------------------
// global settings
// ----------------------------------------------------------------------------
-#define wxUSE_EXCEPTIONS 1
+// define this to 0 when building wxBase library - this can also be done from
+// makefile/project file overriding the value here
+#ifndef wxUSE_GUI
+ #define wxUSE_GUI 1
+#endif // wxUSE_GUI
-// define this to 1 if you want icons to behave as bitmaps
-#define wxICON_IS_BITMAP 0
+// ----------------------------------------------------------------------------
+// compatibility settings
+// ----------------------------------------------------------------------------
-// define this to 0 when building wxBase library
-#define wxUSE_GUI 1
+// This setting determines the compatibility with 2.6 API: set it to 0 to
+// flag all cases of using deprecated functions.
+//
+// Default is 1 but please try building your code with 0 as the default will
+// change to 0 in the next version and the deprecated functions will disappear
+// in the version after it completely.
+//
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_6 0
+
+// This setting determines the compatibility with 2.8 API: set it to 0 to
+// flag all cases of using deprecated functions.
+//
+// Default is 1 but please try building your code with 0 as the default will
+// change to 0 in the next version and the deprecated functions will disappear
+// in the version after it completely.
+//
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_8 1
+
+// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
+// default system font is used for wxWindow::GetCharWidth/Height() instead of
+// the current font.
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxDIALOG_UNIT_COMPATIBILITY 0
-//define this to 1 when adding support for multiple displays/screens
-#define wxUSE_DISPLAY 0
// ----------------------------------------------------------------------------
-// General features
+// debugging settings
// ----------------------------------------------------------------------------
-#define wxUSE_FILESYSTEM 1 // better have this is you want to compile wxHTML
+// Generic comment about debugging settings: they are very useful if you don't
+// use any other memory leak detection tools such as Purify/BoundsChecker, but
+// are probably redundant otherwise. Also, Visual C++ CRT has the same features
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
+// may prefer to use it instead of built in memory debugging code because it is
+// faster and more fool proof.
+//
+// Using VC++ CRT memory debugging is enabled by default in debug mode
+// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
+// and if __NO_VC_CRTDBG__ is not defined.
+
+// If 1, enables wxDebugContext, for writing error messages to file, etc. If
+// __WXDEBUG__ is not defined, will still use the normal memory operators.
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_DEBUG_CONTEXT 0
+
+// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
+// __WXDEBUG__ is also defined.
+//
+// WARNING: this code may not work with all architectures, especially if
+// alignment is an issue. This switch is currently ignored for mingw / cygwin
+//
+// Default is 0
+//
+// Recommended setting: 1 if you are not using a memory debugging tool, else 0
+#define wxUSE_MEMORY_TRACING 0
+
+// In debug mode, cause new and delete to be redefined globally.
+// If this causes problems (e.g. link errors which is a common problem
+// especially if you use another library which also redefines the global new
+// and delete), set this to 0.
+// This switch is currently ignored for mingw / cygwin
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-#if defined(__VISAGECPP__) && (__IBMCPP__ < 400 || __IBMC__ < 400 )
-#define wxUSE_LONGLONG 1
-#endif
+// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
+// this causes problems (e.g. link errors), set this to 0. You may need to set
+// this to 0 if using templates (at least for VC++). This switch is currently
+// ignored for mingw / cygwin / CodeWarrior
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_DEBUG_NEW_ALWAYS 0
+
+// wxHandleFatalExceptions() may be used to catch the program faults at run
+// time and, instead of terminating the program with a usual GPF message box,
+// call the user-defined wxApp::OnFatalException() function. If you set
+// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
+//
+// This setting is for Win32 only and can only be enabled if your compiler
+// supports Win32 structured exception handling (currently only VC++ does)
+//
+// Default is 1
+//
+// Recommended setting: 1 if your compiler supports it.
+#define wxUSE_ON_FATAL_EXCEPTION 1
+
+// Set this to 1 to be able to generate a human-readable (unlike
+// machine-readable minidump created by wxCrashReport::Generate()) stack back
+// trace when your program crashes using wxStackWalker
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_STACKWALKER 1
+
+// Set this to 1 to compile in wxDebugReport class which allows you to create
+// and optionally upload to your web site a debug report consisting of back
+// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, it is compiled into a separate library so there
+// is no overhead if you don't use it
+#define wxUSE_DEBUGREPORT 1
-#define wxUSE_NET_API 1 // Utilize OS/2's UPM netapi's
+// ----------------------------------------------------------------------------
+// Unicode support
+// ----------------------------------------------------------------------------
-#define wxUSE_DATETIME 1 // Utilize the date-time classes
+// These settings are obsolete: the library is always built in Unicode mode
+// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
+// absolutely necessary -- updating it is strongly recommended as the ANSI mode
+// will disappear completely in future wxWidgets releases.
+#ifndef wxUSE_UNICODE
+ #define wxUSE_UNICODE 1
+#endif
-#define wxUSE_CONFIG 1
- // Use wxConfig, with CreateConfig in wxApp
+// wxUSE_WCHAR_T is required by wxWidgets now, don't change.
+#define wxUSE_WCHAR_T 1
-#define wxUSE_POSTSCRIPT 1
- // 0 for no PostScript device context
-#define wxUSE_AFM_FOR_POSTSCRIPT 1
- // 1 to use font metric files in GetTextExtent
-#define wxUSE_METAFILE 1
- // 0 for no Metafile and metafile device context
-#define wxUSE_IPC 1
- // 0 for no interprocess comms
-// Note: wxHELP uses IPC under X so these are interdependent!
-#define wxUSE_HELP 1
- // 0 for no help facility
-#define wxUSE_RESOURCES 1
- // 0 for no wxGetResource/wxWriteResource
-#define wxUSE_CONSTRAINTS 1
- // 0 for no window layout constraint system
+// ----------------------------------------------------------------------------
+// global features
+// ----------------------------------------------------------------------------
-#define wxUSE_TIMEDATE 1
- // 0 for no wxTime/wxDate classes
+// Compile library in exception-safe mode? If set to 1, the library will try to
+// behave correctly in presence of exceptions (even though it still will not
+// use the exceptions itself) and notify the user code about any unhandled
+// exceptions. If set to 0, propagation of the exceptions through the library
+// code will lead to undefined behaviour -- but the code itself will be
+// slightly smaller and faster.
+//
+// Note that like wxUSE_THREADS this option is automatically set to 0 if
+// wxNO_EXCEPTIONS is defined.
+//
+// Default is 1
+//
+// Recommended setting: depends on whether you intend to use C++ exceptions
+// in your own code (1 if you do, 0 if you don't)
+#define wxUSE_EXCEPTIONS 1
-#define wxUSE_MENUS 1
- // 0 for no menus
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0 (this is still work in progress...)
+#define wxUSE_EXTENDED_RTTI 0
+
+// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
+// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
+// and for wxHashMap to be implemented with templates.
+//
+// Default is 0
+//
+// Recommended setting: YMMV
+#define wxUSE_STL 0
+
+// Support for message/error logging. This includes wxLogXXX() functions and
+// wxLog and derived classes. Don't set this to 0 unless you really know what
+// you are doing.
+//
+// Default is 1
+//
+// Recommended setting: 1 (always)
+#define wxUSE_LOG 1
-#define wxUSE_JOYSTICK 1
- // 0 for no joystick functions
+// Recommended setting: 1
+#define wxUSE_LOGWINDOW 1
-#define wxUSE_CLIPBOARD 1
- // 0 for no clipboard functions
+// Recommended setting: 1
+#define wxUSE_LOGGUI 1
-#define wxUSE_PLOT 1
- // 0 for no generic plot functions
+// Recommended setting: 1
+#define wxUSE_LOG_DIALOG 1
+
+// Support for command line parsing using wxCmdLineParser class.
+//
+// Default is 1
+//
+// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
+#define wxUSE_CMDLINE_PARSER 1
+
+// Support for multithreaded applications: if 1, compile in thread classes
+// (thread.h) and make the library a bit more thread safe. Although thread
+// support is quite stable by now, you may still consider recompiling the
+// library without it if you have no use for it - this will result in a
+// somewhat smaller and faster operation.
+//
+// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
+// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
+// build/msw/config.* file this value will have no effect.
+//
+// Default is 1
+//
+// Recommended setting: 0 unless you do plan to develop MT applications
+#define wxUSE_THREADS 1
+
+// If enabled, compiles wxWidgets streams classes
+//
+// wx stream classes are used for image IO, process IO redirection, network
+// protocols implementation and much more and so disabling this results in a
+// lot of other functionality being lost.
+//
+// Default is 1
+//
+// Recommended setting: 1 as setting it to 0 disables many other things
+#define wxUSE_STREAMS 1
-#define wxUSE_SPLINES 1
- // 0 for no splines
+// This is not a real option but is used as the default value for
+// wxUSE_STD_IOSTREAM and wxUSE_STD_STRING.
+//
+// Currently the Digital Mars and Watcom compilers come without standard C++
+// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
+// them (e.g. from STLPort).
+//
+// VC++ 5.0 does include standard C++ library headers, however they produce
+// many warnings that can't be turned off when compiled at warning level 4.
+#if defined(__DMC__) || defined(__WATCOMC__) \
+ || (defined(_MSC_VER) && _MSC_VER < 1200)
+ #define wxUSE_STD_DEFAULT 0
+#else
+ #define wxUSE_STD_DEFAULT 1
+#endif
-#define wxUSE_DRAG_AND_DROP 1
- // 0 for no drag and drop
-
-#define wxUSE_CONTROLS 1 // Do not change
-#define wxUSE_POPUPWIN 1 //
-#define wxUSE_TIPWINDOW 1 //
-
-// Recommended setting: 1
-#define wxUSE_BUTTON 1 // wxButton
-#define wxUSE_BMPBUTTON 1 // wxBitmapButton
-#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
-#define wxUSE_CHECKBOX 1 // wxCheckBox
-#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
-#define wxUSE_CHOICE 1 // wxChoice
-#define wxUSE_COMBOBOX 1 // wxComboBox
-#define wxUSE_GAUGE 1 // wxGauge
-#define wxUSE_LISTBOX 1 // wxListBox
-#define wxUSE_LISTCTRL 1 // wxListCtrl
-#define wxUSE_RADIOBOX 1 // wxRadioBox
-#define wxUSE_RADIOBTN 1 // wxRadioButton
-#define wxUSE_SCROLLBAR 1 // wxScrollBar
-#define wxUSE_SLIDER 1 // wxSlider
-#define wxUSE_SPINBTN 1 // wxSpinButton
-#define wxUSE_SPINCTRL 1 // wxSpinCtrl
-#define wxUSE_STATBOX 1 // wxStaticBox
-#define wxUSE_STATLINE 1 // wxStaticLine
-#define wxUSE_STATTEXT 1 // wxStaticText
-#define wxUSE_STATBMP 1 // wxStaticBitmap
-#define wxUSE_TEXTCTRL 1 // wxTextCtrl
-#define wxUSE_TOGGLEBTN 1 // requires wxButton
-#define wxUSE_TREECTRL 1 // wxTreeCtrl
-#define wxUSE_CHOICEDLG 1
-#define wxUSE_COLOURDLG 1
-#define wxUSE_DATAOBJ 1
-#define wxUSE_FILEDLG 1
-#define wxUSE_FONTDLG 1
-#define wxUSE_FONTMAP 1
-#define wxUSE_GRID 1
-#define wxUSE_IMAGLIST 1
-#define wxUSE_LOGGUI 1
-#define wxUSE_LOGWINDOW 1
-#define wxUSE_LOG_DIALOG 1
-#define wxUSE_MIMETYPE 1
-#define wxUSE_MSGDLG 1
-#define wxUSE_NOTEBOOK 1
-#define wxUSE_LISTBOOK 1
-#define wxUSE_SPLITTER 1
-#define wxUSE_STOPWATCH 1
-#define wxUSE_TAB_DIALOG 1
-#define wxUSE_WXHTML_HELP 1
-#define wxUSE_BUTTONBAR 1
- // Define 1 to use buttonbar classes (enhanced toolbar
- // for MS Windows)
-
-#define wxUSE_RADIOBUTTON 1
- // Define 1 to use radio button control
-
-#define wxUSE_SCROLLBAR 1
- // Define 1 to compile contributed wxScrollBar class
-
-#define wxUSE_CARET 1
- // Define 1 to use wxCaret class
-#define wxUSE_TREECTRL 1
- // Define 1 to use wxTree* classes
-#define wxUSE_XPM_IN_OS2 1
- // Define 1 to support the XPM package in wxBitmap.
-#define wxUSE_IMAGE_LOADING_IN_OS2 1
- // Use dynamic DIB loading/saving code in utils/dib under OS2.
-#define wxUSE_RESOURCE_LOADING_IN_OS2 1
- // Use dynamic icon/cursor loading/saving code
- // under OS2.
-#define wxUSE_WX_RESOURCES 0
- // Use .wxr resource mechanism (requires PrologIO library)
+// Use standard C++ streams if 1 instead of wx streams in some places. If
+// disabled (default), wx streams are used everywhere and wxWidgets doesn't
+// depend on the standard streams library.
+//
+// Notice that enabling this does not replace wx streams with std streams
+// everywhere, in a lot of places wx streams are used no matter what.
+//
+// Default is 0
+//
+// Recommended setting: 1 if you use the standard streams anyhow and so
+// dependency on the standard streams library is not a
+// problem
+#define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
+
+// Enable conversion to standard C++ string if 1.
+//
+// Default is 1 for most compilers.
+//
+// Recommended setting: 1 unless you want to ensure your program doesn't use
+// the standard C++ library at all.
+#define wxUSE_STD_STRING wxUSE_STD_DEFAULT
+
+// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
+// Note that if the system's implementation does not support positional
+// parameters, setting this to 1 forces the use of the wxWidgets implementation
+// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
+// many Unix systems but usually doesn't under Windows.
+//
+// Positional parameters are very useful when translating a program since using
+// them in formatting strings allow translators to correctly reorder the
+// translated sentences.
+//
+// Default is 1
+//
+// Recommended setting: 1 if you want to support multiple languages
+#define wxUSE_PRINTF_POS_PARAMS 1
-// support for startup tips (wxShowTip &c)
-#define wxUSE_STARTUP_TIPS 1
+// ----------------------------------------------------------------------------
+// non GUI features selection
+// ----------------------------------------------------------------------------
-#define wxUSE_DOC_VIEW_ARCHITECTURE 1
- // Set to 0 to disable document/view architecture
-#define wxUSE_MDI_ARCHITECTURE 1
- // Set to 0 to disable MDI document/view architecture
-#define wxUSE_PRINTING_ARCHITECTURE 1
- // Set to 0 to disable print/preview architecture code
-#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_OS2 1
- // Set to 0 to disable PostScript print/preview architecture code
- // under OS/2 PM (just use PM printing).
-#define wxUSE_DYNAMIC_CLASSES 1
- // If 1, enables provision of run-time type information.
- // NOW MANDATORY: don't change.
-#define wxUSE_MEMORY_TRACING 1
- // If 1, enables debugging versions of wxObject::new and
- // wxObject::delete *IF* __WXDEBUG__ is also defined.
- // WARNING: this code may not work with all architectures, especially
- // if alignment is an issue.
-#define wxUSE_DEBUG_CONTEXT 1
- // If 1, enables wxDebugContext, for
- // writing error messages to file, etc.
- // If __WXDEBUG__ is not defined, will still use
- // normal memory operators.
- // It's recommended to set this to 1,
- // since you may well need to output
- // an error log in a production
- // version (or non-debugging beta)
-#if defined(__VISAGECPP__) && (__IBMCPP__ < 400 || __IBMC__ < 400 )
-#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-#else
-#define wxUSE_GLOBAL_MEMORY_OPERATORS 1
-#endif
- // In debug mode, cause new and delete to be redefined globally.
- // If this causes problems (e.g. link errors), set this to 0.
-
-#define wxUSE_DEBUG_NEW_ALWAYS 1
- // In debug mode, causes new to be defined to
- // be WXDEBUG_NEW (see object.h).
- // If this causes problems (e.g. link errors), set this to 0.
- // You may need to set this to 0 if using templates (at least
- // for VC++).
-
-#define REMOVE_UNUSED_ARG 1
- // Set this to 0 if your compiler can't cope
- // with omission of prototype parameters.
-
-#define wxUSE_ODBC 1
- // Define 1 to use ODBC classes
-
-#define wxODBC_FWD_ONLY_CURSORS 1
- // For backward compatibility reasons, this parameter now only
- // controls the default scrolling method used by cursors. This
- // default behavior can be overriden by setting the second param
- // of wxDB::GetDbConnection() to indicate whether the connection
- // (and any wxTable()s that use the connection) should support
- // forward only scrolling of cursors, or both forward and backward
- // Support for backward scrolling cursors is dependent on the
- // data source as well as the ODBC driver being used.
-
-#define wxODBC_BACKWARD_COMPATABILITY 0
- // Default is 0. Set to 1 to use the deprecated classes, enum
- // types, function, member variables. With a setting of 1, full
- // backward compatability with the 2.0.x release is possible.
- // It is STRONGLY recommended that this be set to 0, as
- // future development will be done only on the non-deprecated
- // functions/classes/member variables/etc.
-
-#define wxUSE_IOSTREAMH 1
- // VC++ 4.2 and above allows <iostream> and <iostream.h>
- // but you can't mix them. Set to 1 for <iostream.h>,
- // 0 for <iostream>
+// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
+// integer which is implemented in terms of native 64 bit integers if any or
+// uses emulation otherwise.
+//
+// This class is required by wxDateTime and so you should enable it if you want
+// to use wxDateTime. For most modern platforms, it will use the native 64 bit
+// integers in which case (almost) all of its functions are inline and it
+// almost does not take any space, so there should be no reason to switch it
+// off.
+//
+// Recommended setting: 1
+#define wxUSE_LONGLONG 1
+
+// Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for
+// storing binary data in wxConfig on most platforms.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely disabled if you don't use it)
+#define wxUSE_BASE64 1
+
+// Set this to 1 to be able to use wxEventLoop even in console applications
+// (i.e. using base library only, without GUI). This is mostly useful for
+// processing socket events but is also necessary to use timers in console
+// applications
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely disabled if you don't use it)
+#define wxUSE_CONSOLE_EVENTLOOP 1
+
+// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
+// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
+//
+// Default is 1
+//
+// Recommended setting: 1 (wxFile is highly recommended as it is required by
+// i18n code, wxFileConfig and others)
+#define wxUSE_FILE 1
+#define wxUSE_FFILE 1
-#define wxUSE_STREAMS 1
- // If enabled (1), compiles wxWindows streams classes
+// Use wxFSVolume class providing access to the configured/active mount points
+//
+// Default is 1
+//
+// Recommended setting: 1 (but may be safely disabled if you don't use it)
+#define wxUSE_FSVOLUME 1
+
+// Use wxStandardPaths class which allows to retrieve some standard locations
+// in the file system
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be disabled to save space, but not much)
+#define wxUSE_STDPATHS 1
-#define wxUSE_STD_IOSTREAM 1
- // Use standard C++ streams if 1. If 0, use wxWin
- // streams implementation.
+// use wxTextBuffer class: required by wxTextFile
+#define wxUSE_TEXTBUFFER 1
-#define wxUSE_THREADS 1
- // support for multithreaded applications: if
- // 1, compile in thread classes (thread.h)
- // and make the library thread safe
-#define wxUSE_ZLIB 1
- // Use zlib for compression in streams and PNG code
-#define wxUSE_GZSTREAM 1
- // Set to 1 to compile wxGzipInput/OutputStream classes.
- // Requires wxUSE_ZLIB.
-#define wxUSE_IMAGE 1
- // Set to 1 for wxImage support (recommended).
-#define wxUSE_LIBPNG 1
- // Set to 1 for PNG format support
-#define wxUSE_LIBJPEG 1
- // Set to 1 for JPEG format support
-#define wxUSE_LIBTIFF 1
- // Set to 1 for TIFF format support
-#define wxUSE_GIF 1
- // Set to 1 for GIF format support
-#define wxUSE_PNM 1
- // Set to 1 for PNM format support
-#define wxUSE_PCX 1
- // Set to 1 for PCX format support
-#define wxUSE_IFF 1
- // Set to 1 for IFF format support
-#define wxUSE_XPM 1
- // Set to 1 for XPM format support
+// use wxTextFile class: requires wxFile and wxTextBuffer, required by
+// wxFileConfig
+#define wxUSE_TEXTFILE 1
+
+// i18n support: _() macro, wxLocale class. Requires wxTextFile.
+#define wxUSE_INTL 1
+
+// Provide wxFoo_l() functions similar to standard foo() functions but taking
+// an extra locale parameter.
+//
+// Notice that this is fully implemented only for the systems providing POSIX
+// xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
+// almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
+// only work for the current user locale and "C" locale. You can use
+// wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
+//
+// Default is 1
+//
+// Recommended setting: 1 but may be disabled if you are writing programs
+// running only in C locale anyhow
+#define wxUSE_XLOCALE 1
+
+// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
+// allow to manipulate dates, times and time intervals. wxDateTime replaces the
+// old wxTime and wxDate classes which are still provided for backwards
+// compatibility (and implemented in terms of wxDateTime).
+//
+// Note that this class is relatively new and is still officially in alpha
+// stage because some features are not yet (fully) implemented. It is already
+// quite useful though and should only be disabled if you are aiming at
+// absolutely minimal version of the library.
+//
+// Requires: wxUSE_LONGLONG
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_DATETIME 1
+// Set wxUSE_TIMER to 1 to compile wxTimer class
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_TIMER 1
+
+// Use wxStopWatch clas.
+//
+// Default is 1
+//
+// Recommended setting: 1 (needed by wxSocket)
+#define wxUSE_STOPWATCH 1
+
+// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
+// which allow the application to store its settings in the persistent
+// storage. Setting this to 1 will also enable on-demand creation of the
+// global config object in wxApp.
+//
+// See also wxUSE_CONFIG_NATIVE below.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG 1
+
+// If wxUSE_CONFIG is 1, you may choose to use either the native config
+// classes under Windows (using .INI files under Win16 and the registry under
+// Win32) or the portable text file format used by the config classes under
+// Unix.
+//
+// Default is 1 to use native classes. Note that you may still use
+// wxFileConfig even if you set this to 1 - just the config object created by
+// default for the applications needs will be a wxRegConfig or wxIniConfig and
+// not wxFileConfig.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG_NATIVE 1
+
+// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
+// to connect/disconnect from the network and be notified whenever the dial-up
+// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DIALUP_MANAGER 1
+
+// Compile in classes for run-time DLL loading and function calling.
+// Required by wxUSE_DIALUP_MANAGER.
+//
+// This setting is for Win32 only
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DYNLIB_CLASS 1
-#define wxUSE_ICO_CUR 1
- // Set to 1 for MS Icons and Cursors format support
+// experimental, don't use for now
+#define wxUSE_DYNAMIC_LOADER 1
-#define wxUSE_SERIAL 1
- // Use serialization (requires utils/serialize)
-#define wxUSE_TOOLTIPS 1
- // Define to use wxToolTip class and
- // wxWindow::SetToolTip() method
+// Set to 1 to use socket classes
#define wxUSE_SOCKETS 1
- // Set to 1 to use socket classes
-#define wxUSE_HTML 1
- // Set to 1 to use wxHTML sub-library
+
+// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
+//
+// Notice that currently setting this option under Windows will result in
+// programs which can only run on recent OS versions (with ws2_32.dll
+// installed) which is why it is disabled by default.
+//
+// Default is 1.
+//
+// Recommended setting: 1 if you need IPv6 support
+#define wxUSE_IPV6 0
+
+// Set to 1 to enable virtual file systems (required by wxHTML)
+#define wxUSE_FILESYSTEM 1
+
+// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
#define wxUSE_FS_ZIP 1
-#define wxUSE_FS_INET 1 // Set to 1 to enable virtual file systems
-#define wxUSE_BUSYINFO 1
- // wxBusyInfo displays window with message
- // when app is busy. Works in same way as
- // wxBusyCursor
+// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_ARCHIVE 1
+
+// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_INET 1
+
+// wxArchive classes for accessing archives such as zip and tar
+#define wxUSE_ARCHIVE_STREAMS 1
+
+// Set to 1 to compile wxZipInput/OutputStream classes.
#define wxUSE_ZIPSTREAM 1
- // input stream for reading from zip archives
-#define wxUSE_TIMER 1 // use the timer class
-/*
- * Finer detail
- *
- */
+// Set to 1 to compile wxTarInput/OutputStream classes.
+#define wxUSE_TARSTREAM 1
+
+// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
+// wxUSE_LIBPNG
+#define wxUSE_ZLIB 1
+// If enabled, the code written by Apple will be used to write, in a portable
+// way, float on the disk. See extended.c for the license which is different
+// from wxWidgets one.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you don't like the license terms (unlikely)
#define wxUSE_APPLE_IEEE 1
- // if enabled, the float codec written by Apple
- // will be used to write, in a portable way,
- // float on the disk
-// use wxFile class - required by i18n code, wxConfig and others - recommended
-#define wxUSE_FILE 1
+// Joystick support class
+#define wxUSE_JOYSTICK 1
-#define wxUSE_FFILE 1
+// wxFontEnumerator class
+#define wxUSE_FONTENUM 1
-// use wxTextBuffer class: required by wxTextFile
-#define wxUSE_TEXTBUFFER 1
+// wxFontMapper class
+#define wxUSE_FONTMAP 1
-// use wxTextFile class: requires wxFile, required by wxConfig
-#define wxUSE_TEXTFILE 1
+// wxMimeTypesManager class
+#define wxUSE_MIMETYPE 1
-// i18n support: _() macro, wxLocale class. Requires wxFile
-#define wxUSE_INTL 1
+// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
+// or wxURL you need to set this to 1.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_PROTOCOL 1
+
+// The settings for the individual URL schemes
+#define wxUSE_PROTOCOL_FILE 1
+#define wxUSE_PROTOCOL_FTP 1
+#define wxUSE_PROTOCOL_HTTP 1
+
+// Define this to use wxURL class.
+#define wxUSE_URL 1
+
+// Define this to use native platform url and protocol support.
+// Currently valid only for MS-Windows.
+// Note: if you set this to 1, you can open ftp/http/gopher sites
+// and obtain a valid input stream for these sites
+// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
+// Doing so reduces the code size.
+//
+// This code is experimental and subject to change.
+#define wxUSE_URL_NATIVE 0
+
+// Support for wxVariant class used in several places throughout the library,
+// notably in wxDataViewCtrl API.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you want to reduce the library size as much as
+// possible in which case setting this to 0 can gain up to 100KB.
+#define wxUSE_VARIANT 1
+
+// Support for regular expression matching via wxRegEx class: enable this to
+// use POSIX regular expressions in your code. You need to compile regex
+// library from src/regex to use it under Windows.
+//
+// Default is 0
+//
+// Recommended setting: 1 if your compiler supports it, if it doesn't please
+// contribute us a makefile for src/regex for it
+#define wxUSE_REGEX 1
+
+// wxSystemOptions class
+#define wxUSE_SYSTEM_OPTIONS 1
+
+// wxSound class
+#define wxUSE_SOUND 1
+
+// Use wxMediaCtrl
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_MEDIACTRL 1
+
+// Use GStreamer for Unix.
+//
+// Default is 0 as this requires a lot of dependencies which might not be
+// available.
+//
+// Recommended setting: 1 (wxMediaCtrl won't work by default without it)
+#define wxUSE_GSTREAMER 0
+
+// Use wxWidget's XRC XML-based resource system. Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC 1
+
+// XML parsing classes. Note that their API will change in the future, so
+// using wxXmlDocument and wxXmlNode in your app is not recommended.
+//
+// Default is the same as wxUSE_XRC, i.e. 1 by default.
+//
+// Recommended setting: 1 (required by XRC)
+#define wxUSE_XML wxUSE_XRC
+
+// Use wxWidget's AUI docking system
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_AUI 1
-// wxLogXXX functions - highly recommended
-#define wxUSE_LOG 1
+// Use wxPropertyGrid.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_PROPGRID 1
-// wxValidator class
-#define wxUSE_VALIDATORS 1
+// Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_STC 1
+
+
+// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
+// 2D drawing API. (Still somewhat experimental)
+//
+// Please note that on Windows you will need to link with gdiplus.lib (use
+// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
+// application if you want it to be runnable on pre-XP systems.
+//
+// Default is 0
+//
+// Recommended setting: 1
+#ifndef wxUSE_GRAPHICS_CONTEXT
+#define wxUSE_GRAPHICS_CONTEXT 0
+#endif
+
+// ----------------------------------------------------------------------------
+// Individual GUI controls
+// ----------------------------------------------------------------------------
+
+// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
+// (without it, wxControl class is not compiled)
+//
+// Default is 1
+//
+// Recommended setting: 1 (don't change except for very special programs)
+#define wxUSE_CONTROLS 1
+
+// wxPopupWindow class is a top level transient window. It is currently used
+// to implement wxTipWindow
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
+#define wxUSE_POPUPWIN 1
+
+// wxTipWindow allows to implement the custom tooltips, it is used by the
+// context help classes. Requires wxUSE_POPUPWIN.
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0)
+#define wxUSE_TIPWINDOW 1
+
+// Each of the settings below corresponds to one wxWidgets control. They are
+// all switched on by default but may be disabled if you are sure that your
+// program (including any standard dialogs it can show!) doesn't need them and
+// if you desperately want to save some space. If you use any of these you must
+// set wxUSE_CONTROLS as well.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
+#define wxUSE_BUTTON 1 // wxButton
+#define wxUSE_BMPBUTTON 1 // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
+#define wxUSE_CHECKBOX 1 // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHOICE 1 // wxChoice
+#define wxUSE_COLLPANE 1 // wxCollapsiblePane
+#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
+#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
+#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
+#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
+#define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
+#define wxUSE_FILECTRL 1 // wxFileCtrl
+#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
+#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
+#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_HEADERCTRL 1 // wxHeaderCtrl
+#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
+#define wxUSE_LISTBOX 1 // wxListBox
+#define wxUSE_LISTCTRL 1 // wxListCtrl
+#define wxUSE_RADIOBOX 1 // wxRadioBox
+#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_SCROLLBAR 1 // wxScrollBar
+#define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
+#define wxUSE_SLIDER 1 // wxSlider
+#define wxUSE_SPINBTN 1 // wxSpinButton
+#define wxUSE_SPINCTRL 1 // wxSpinCtrl
+#define wxUSE_STATBOX 1 // wxStaticBox
+#define wxUSE_STATLINE 1 // wxStaticLine
+#define wxUSE_STATTEXT 1 // wxStaticText
+#define wxUSE_STATBMP 1 // wxStaticBitmap
+#define wxUSE_TEXTCTRL 1 // wxTextCtrl
+#define wxUSE_TOGGLEBTN 1 // requires wxButton
+#define wxUSE_TREECTRL 1 // wxTreeCtrl
+
+// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
+// below either wxStatusBar95 or a generic wxStatusBar will be used.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_STATUSBAR 1
+
+// Two status bar implementations are available under Win32: the generic one
+// or the wrapper around native control. For native look and feel the native
+// version should be used.
+//
+// Default is 1 for the platforms where native status bar is supported.
+//
+// Recommended setting: 1 (there is no advantage in using the generic one)
+#define wxUSE_NATIVE_STATUSBAR 1
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
+#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
+
+// wxNotebook is a control with several "tabs" located on one of its sides. It
+// may be used to logically organise the data presented to the user instead of
+// putting everything in one huge dialog. It replaces wxTabControl and related
+// classes of wxWin 1.6x.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTEBOOK 1
+
+// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_LISTBOOK 1
+
+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+
+// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TREEBOOK 1
+
+// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
+// tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLBOOK 1
+
+// wxTaskBarIcon is a small notification icon shown in the system toolbar or
+// dock.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be set to 0 if you don't need it)
+#define wxUSE_TASKBARICON 1
+
+// wxGrid class
+//
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
+//
+// Recommended setting: 1
+//
+#define wxUSE_GRID 1
+
+// wxMiniFrame class: a frame with narrow title bar
+//
+// Default is 1.
+//
+// Recommended setting: 1 (it doesn't cost almost anything)
+#define wxUSE_MINIFRAME 1
+
+// wxComboCtrl and related classes: combobox with custom popup window and
+// not necessarily a listbox.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
+// it used by wxComboBox
+#define wxUSE_COMBOCTRL 1
+
+// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
+// items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0, except where it is
+// needed as a base class for generic wxBitmapComboBox.
+#define wxUSE_ODCOMBOBOX 1
+
+// wxBitmapComboBox is a combobox that can have images in front of text items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0
+#define wxUSE_BITMAPCOMBOBOX 1
+
+// wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
+// up and down in it. It is also used as part of wxRearrangeDialog.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 (currently used only by
+// wxHeaderCtrl)
+#define wxUSE_REARRANGECTRL 1
+
+// ----------------------------------------------------------------------------
+// Miscellaneous GUI stuff
+// ----------------------------------------------------------------------------
// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
#define wxUSE_ACCEL 1
-// wxSashWindow class
-#define wxUSE_SASH 1
+// Hotkey support (currently Windows only)
+#define wxUSE_HOTKEY 1
+
+// Use wxCaret: a class implementing a "cursor" in a text control (called caret
+// under Windows).
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can be safely set to 0, not used by the library)
+#define wxUSE_CARET 1
+
+// Use wxDisplay class: it allows enumerating all displays on a system and
+// their geometries as well as finding the display on which the given point or
+// window lies.
+//
+// Default is 1.
+//
+// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
+#define wxUSE_DISPLAY 1
+
+// Miscellaneous geometry code: needed for Canvas library
+#define wxUSE_GEOMETRY 1
+
+// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
+// wxListCtrl.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (set it to 0 if you don't use any of the controls
+// enumerated above, then this class is mostly useless too)
+#define wxUSE_IMAGLIST 1
+
+// Use wxMenu, wxMenuBar, wxMenuItem.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can't be disabled under MSW)
+#define wxUSE_MENUS 1
+
+// Use wxNotificationMessage.
+//
+// wxNotificationMessage allows to show non-intrusive messages to the user
+// using balloons, banners, popups or whatever is the appropriate method for
+// the current platform.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTIFICATION_MESSAGE 1
+
+// Use wxSashWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SASH 1
+
+// Use wxSplitterWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SPLITTER 1
+
+// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLTIPS 1
+
+// wxValidator class and related methods
+#define wxUSE_VALIDATORS 1
+
+// Use reference counted ID management: this means that wxWidgets will track
+// the automatically allocated ids (those used when you use wxID_ANY when
+// creating a window, menu or toolbar item &c) instead of just supposing that
+// the program never runs out of them. This is mostly useful only under wxMSW
+// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
+// long-running programs can run into problems with ids reuse without this. On
+// the other platforms, where the ids have the full int range, this shouldn't
+// be necessary.
+#ifdef __WXMSW__
+#define wxUSE_AUTOID_MANAGEMENT 1
+#else
+#define wxUSE_AUTOID_MANAGEMENT 0
+#endif
+
+// ----------------------------------------------------------------------------
+// common dialogs
+// ----------------------------------------------------------------------------
+
+// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
+// file selector, printer dialog). Switching this off also switches off the
+// printing architecture and interactive wxPrinterDC.
+//
+// Default is 1
+//
+// Recommended setting: 1 (unless it really doesn't work)
+#define wxUSE_COMMON_DIALOGS 1
+
+// wxBusyInfo displays window with message when app is busy. Works in same way
+// as wxBusyCursor
+#define wxUSE_BUSYINFO 1
+
+// Use single/multiple choice dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_CHOICEDLG 1
+
+// Use colour picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_COLOURDLG 1
+
+// wxDirDlg class for getting a directory name from user
+#define wxUSE_DIRDLG 1
+
+// TODO: setting to choose the generic or native one
+
+// Use file open/save dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in many places in the library itself)
+#define wxUSE_FILEDLG 1
+
+// Use find/replace dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (but may be safely set to 0)
+#define wxUSE_FINDREPLDLG 1
+
+// Use font picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_FONTDLG 1
+
+// Use wxMessageDialog and wxMessageBox.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_MSGDLG 1
+
+// progress dialog class for lengthy operations
+#define wxUSE_PROGRESSDLG 1
+
+// support for startup tips (wxShowTip &c)
+#define wxUSE_STARTUP_TIPS 1
// text entry dialog and wxGetTextFromUser function
#define wxUSE_TEXTDLG 1
-// use the number dialog
+// number entry dialog
#define wxUSE_NUMBERDLG 1
-// wxToolBar class
-#define wxUSE_TOOLBAR 1
-#define wxUSE_TOOLBAR_NATIVE 1
+// splash screen class
+#define wxUSE_SPLASH 1
-// wxStatusBar class
-#define wxUSE_STATUSBAR 1
+// wizards
+#define wxUSE_WIZARDDLG 1
-// wxSpinCtrl class
-#define wxUSE_SPINCTRL 1
+// Compile in wxAboutBox() function showing the standard "About" dialog.
+//
+// Default is 1
+//
+// Recommended setting: 1 but can be set to 0 to save some space if you don't
+// use this function
+#define wxUSE_ABOUTDLG 1
-// progress dialog class for lengthy operations
-#define wxUSE_PROGRESSDLG 1
+// ----------------------------------------------------------------------------
+// Metafiles support
+// ----------------------------------------------------------------------------
-// wxDirDlg class for getting a directory name from user
-#define wxUSE_DIRDLG 1
-#define wxUSE_DIRDLGG 1
+// Windows supports the graphics format known as metafile which is, though not
+// portable, is widely used under Windows and so is supported by wxWin (under
+// Windows only, of course). Win16 (Win3.1) used the so-called "Window
+// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
+// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
+// default, WMFs will be used under Win16 and EMFs under Win32. This may be
+// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
+// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
+// in any metafile related classes at all.
+//
+// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
+//
+// Recommended setting: default or 0 for everything for portable programs.
+#define wxUSE_METAFILE 1
+#define wxUSE_ENH_METAFILE 1
+#define wxUSE_WIN_METAFILES_ALWAYS 0
-#define wxUSE_OWNER_DRAWN 1
- // Owner-drawn menus and listboxes
+// ----------------------------------------------------------------------------
+// Big GUI components
+// ----------------------------------------------------------------------------
-/*
- * Any platform
- *
- */
+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 1
+
+// Set to 0 to disable document/view architecture
+#define wxUSE_DOC_VIEW_ARCHITECTURE 1
+
+// Set to 0 to disable MDI document/view architecture
+//
+// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
+#define wxUSE_MDI_ARCHITECTURE 1
+
+// Set to 0 to disable print/preview architecture code
+#define wxUSE_PRINTING_ARCHITECTURE 1
-#define wxUSE_TYPEDEFS 0
- // Use typedefs not classes for wxPoint
- // and others, to reduce overhead and avoid
- // MS C7 memory bug. Bounds checker
- // complains about deallocating
- // arrays of wxPoints if wxPoint is a class.
+// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
+// much more.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
+// smaller library.
+#define wxUSE_HTML 1
+
+// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
+// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
+// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
+// will need to manually add opengl32.lib and glu32.lib to the list of
+// libraries linked with your program if you use OpenGL.
+//
+// Default is 0.
+//
+// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
+#define wxUSE_GLCANVAS 0
+
+// wxRichTextCtrl allows editing of styled text.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 if you want compile a
+// smaller library.
+#define wxUSE_RICHTEXT 1
-#define wxUSE_PORTABLE_FONTS_IN_OS2 0
- // Define 1 to use new portable font scheme in Windows
- // (used by default under X)
+// ----------------------------------------------------------------------------
+// Data transfer
+// ----------------------------------------------------------------------------
-#define wxUSE_GENERIC_DIALOGS_IN_OS2 0
- // Define 1 to use generic dialogs in Windows, even though
- // they duplicate native common dialog (e.g. wxColourDialog)
+// Use wxClipboard class for clipboard copy/paste.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CLIPBOARD 1
+
+// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
+// drop
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DATAOBJ 1
+
+// Use wxDropTarget and wxDropSource classes for drag and drop (this is
+// different from "built in" drag and drop in wxTreeCtrl which is always
+// available). Requires wxUSE_DATAOBJ.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DRAG_AND_DROP 1
+
+// Use wxAccessible for enhanced and customisable accessibility.
+// Depends on wxUSE_OLE.
+//
+// Default is 0.
+//
+// Recommended setting (at present): 0
+#define wxUSE_ACCESSIBILITY 0
+
+// ----------------------------------------------------------------------------
+// miscellaneous settings
+// ----------------------------------------------------------------------------
+// wxSingleInstanceChecker class allows to verify at startup if another program
+// instance is running.
+//
+// Default is 1
+//
+// Recommended setting: 1 (the class is tiny, disabling it won't save much
+// space)
#define wxUSE_SNGLINST_CHECKER 1
-#define wxUSE_GEOMETRY 1
- // needed for wxCanvas
-#define wxUSE_MENUS 1
+#define wxUSE_DRAGIMAGE 1
-#define wxUSE_WAVE 1
+#define wxUSE_IPC 1
+ // 0 for no interprocess comms
+#define wxUSE_HELP 1
+ // 0 for no help facility
-#define wxUSE_REGEX 1
+// Should we use MS HTML help for wxHelpController? If disabled, neither
+// wxCHMHelpController nor wxBestHelpController are available.
+//
+// Default is 1 under MSW, 0 is always used for the other platforms.
+//
+// Recommended setting: 1, only set to 0 if you have trouble compiling
+// wxCHMHelpController (could be a problem with really ancient compilers)
+#define wxUSE_MS_HTML_HELP 1
-#define wxUSE_FINDREPLDLG 1 // Find replace dialog
-#define wxUSE_PALETTE 1
+// Use wxHTML-based help controller?
+#define wxUSE_WXHTML_HELP 1
-#define wxUSE_CMDLINE_PARSER 1
+#define wxUSE_CONSTRAINTS 1
+ // 0 for no window layout constraint system
-#define wxUSE_SPLASH 1
+#define wxUSE_SPLINES 1
+ // 0 for no splines
-#if (!(defined(WXUSINGDLL) || defined(WXMAKINGDLL)))
- #define NO_TEXT_WINDOW_STREAM 1 // defined in textctrl.h for DLL builds
-#endif
+#define wxUSE_MOUSEWHEEL 1
+ // Include mouse wheel support
-#define wxUSE_UNICODE 0
-#define wxUSE_UNICODE_MSLU 0
+// ----------------------------------------------------------------------------
+// wxDC classes for various output formats
+// ----------------------------------------------------------------------------
-#define wxUSE_DYNLIB_CLASS 1
- // Compile in wxLibrary class for run-time
- // DLL loading and function calling
-#define wxUSE_DYNAMIC_LOADER 0
+// Set to 1 for PostScript device context.
+#define wxUSE_POSTSCRIPT 0
-#define wxUSE_WCHAR_T 1
-#define wxUSE_PROTOCOL 1
-#define wxUSE_URL 1
-#define wxUSE_PROTOCOL_HTTP 1
-#define wxUSE_PROTOCOL_FTP 1
-#define wxUSE_PROTOCOL_FILE 1
+// Set to 1 to use font metric files in GetTextExtent
+#define wxUSE_AFM_FOR_POSTSCRIPT 1
-#define wxUSE_GENERIC_MDI_AS_NATIVE 1
+// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
+// to create files in SVG (Scalable Vector Graphics) format.
+#define wxUSE_SVG 1
-#endif
- // _WX_SETUP_H_
+// ----------------------------------------------------------------------------
+// other compiler (mis)features
+// ----------------------------------------------------------------------------
+
+// Set this to 0 if your compiler can't cope with omission of prototype
+// parameters.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (should never need to set this to 0)
+#define REMOVE_UNUSED_ARG 1
+
+// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
+// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
+//
+// Note that newer compilers (including VC++ 7.1 and later) don't support
+// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
+//
+// Default is 0.
+//
+// Recommended setting: 0, only set to 1 if you use a really old compiler
+#define wxUSE_IOSTREAMH 0
+
+// ----------------------------------------------------------------------------
+// image format support
+// ----------------------------------------------------------------------------
+
+// wxImage supports many different image formats which can be configured at
+// compile-time. BMP is always supported, others are optional and can be safely
+// disabled if you don't plan to use images in such format sometimes saving
+// substantial amount of code in the final library.
+//
+// Some formats require an extra library which is included in wxWin sources
+// which is mentioned if it is the case.
+
+// Set to 1 for wxImage support (recommended).
+#define wxUSE_IMAGE 1
+
+// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
+#define wxUSE_LIBPNG 1
+
+// Set to 1 for JPEG format support (requires libjpeg)
+#define wxUSE_LIBJPEG 1
+
+// Set to 1 for TIFF format support (requires libtiff)
+#define wxUSE_LIBTIFF 1
+
+// Set to 1 for TGA format support (loading only)
+#define wxUSE_TGA 1
+
+// Set to 1 for GIF format support
+#define wxUSE_GIF 1
+
+// Set to 1 for PNM format support
+#define wxUSE_PNM 1
+
+// Set to 1 for PCX format support
+#define wxUSE_PCX 1
+
+// Set to 1 for IFF format support (Amiga format)
+#define wxUSE_IFF 0
+
+// Set to 1 for XPM format support
+#define wxUSE_XPM 1
+
+// Set to 1 for MS Icons and Cursors format support
+#define wxUSE_ICO_CUR 1
+
+// Set to 1 to compile in wxPalette class
+#define wxUSE_PALETTE 1
+
+// ----------------------------------------------------------------------------
+// wxUniversal-only options
+// ----------------------------------------------------------------------------
+
+// Set to 1 to enable compilation of all themes, this is the default
+#define wxUSE_ALL_THEMES 1
+
+// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
+// is unset, if it is set these options are not used; notice that metal theme
+// uses Win32 one
+#define wxUSE_THEME_GTK 0
+#define wxUSE_THEME_METAL 0
+#define wxUSE_THEME_MONO 0
+#define wxUSE_THEME_WIN32 0
+
+
+/* --- end common options --- */
+
+/*
+ * Unix-specific options
+ */
+#define wxUSE_SELECT_DISPATCHER 1
+#define wxUSE_EPOLL_DISPATCHER 0
+
+#define wxUSE_UNICODE_UTF8 0
+#define wxUSE_UTF8_LOCALE_ONLY 0
+
+#endif // _WX_SETUP_H_
projects / wxWidgets.git / blobdiff