exec_prefix=@exec_prefix@
exec_prefix_set=no
CC="@CC@"
+GCC="@GCC@"
CXX="@CXX@"
LD="@SHARED_LD@"
+srcdir=@top_srcdir@
+builddir=@top_builddir_wxconfig@
+cross_compiling=@cross_compiling@
+target=@host_alias@
+static_flag=@STATIC_FLAG@
-usage="\
-Usage: wx-config [--prefix[=DIR]] [--exec-prefix[=DIR]] [--version] [--libs] [--cflags] [--cc] [--cxx] [--ld]"
+# return the absolute path prepending builddir to it if needed
+makeabs()
+{
+ path=$1
+ # TODO: this only works under Unix and even there it could be
+ # enhanced to remove ".." and "."
+ if [ `echo $path | sed 's/^\(.\).*/\1/'` != "/" ]; then
+ if [ $path = "." ]; then
+ path=$builddir
+ else
+ path="$builddir/$path"
+ fi
+ fi
+
+ echo $path
+}
+
+usage()
+{
+ cat <<EOF
+Usage: wx-config [--prefix[=DIR]] [--exec-prefix[=DIR]] [--version] [--release]
+ [--basename] [--static] [--libs] [--gl-libs]
+ [--cppflags] [--cflags] [--cxxflags] [--ldflags] [--rezflags]
+ [--cc] [--cxx] [--ld]
+
+wx-config returns configuration information about the installed
+version of wxWindows. It may be used to query its version and
+installation directories and also retrieve the C and C++ compilers
+and linker which were used for its building and the corresponding
+flags.
+
+Ordinarily it should be installed to the appropriate system location
+along with the headers and library files, but it is also possible to
+use it to enable builds with an uninstalled wxWindows version for
+package building and bleeding edge developers. To do so, use it like
+this:
+
+\${wx_builddir}/wx-config --prefix=\${wx_srcdir} --exec-prefix=\${wx_builddir}
+
+Note that any other options supplied must come *after* the prefix
+specification for it to take effect.
+
+EOF
+
+ exit $1
+}
+
+cppflags()
+{
+ # we should never specify -I/usr/include on the compiler command line: this
+ # is at best useless and at worst breaks compilation on the systems where
+ # the system headers are non-ANSI because gcc works around this by storing
+ # the ANSI-fied versions of them in its private directory which is searched
+ # after all the directories on the cmd line.
+ #
+ # the situation is a bit more complicated with -I/usr/local/include: again,
+ # it shouldn't be specified with gcc which looks there by default anyhow
+ # and gives warnings (at least 3.1 does) if it is specified explicitly --
+ # but this -I switch *is* needed for the other compilers
+ #
+ # note that we assume that if we use GNU cc we also use GNU c++ and vice
+ # versa, i.e. this won't work (either for --cflags or --cxxflags) if GNU C
+ # compiler and non-GNU C++ compiler are used or vice versa -- we'll fix
+ # this when/if anybody complains about it
+ if test "@includedir@" != "/usr/include" \
+ -a "@includedir@" != "/usr/include/c++" \
+ -a \( "${GCC}" != "yes" \
+ -o "@includedir@" != "/usr/local/include" \) \
+ -a \( "${cross_compiling}" != "yes" \
+ -o "@includedir@" != "/usr/${target}/include" \) ;
+ then
+ includes=" -I@includedir@"
+ fi
+
+ includes="-I@libdir@/wx/include/@TOOLCHAIN_NAME@$includes"
+
+ if test $static_flag = yes ; then
+ echo $includes @WXDEBUG_DEFINE@ @TOOLCHAIN_DEFS@ @WXCONFIG_INCLUDE@ @WX_LARGEFILE_FLAGS@
+ else
+ echo $includes @WXDEBUG_DEFINE@ @TOOLCHAIN_DEFS@ @TOOLCHAIN_DLL_DEFS@ @WXCONFIG_INCLUDE@ @WX_LARGEFILE_FLAGS@
+ fi
+}
if test $# -eq 0; then
- echo "${usage}" 1>&2
- exit 1
+ usage 1 1>&2
fi
while test $# -gt 0; do
esac
case $1 in
+ --inplace)
+ prefix=`makeabs $srcdir`
+ exec_prefix=`makeabs $builddir`
+ exec_prefix_set=yes
+ ;;
--prefix=*)
prefix=$optarg
if test $exec_prefix_set = no ; then
--version)
echo @WX_MAJOR_VERSION_NUMBER@.@WX_MINOR_VERSION_NUMBER@.@WX_RELEASE_NUMBER@
;;
+ --release)
+ # Should echo @WX_RELEASE@ instead, but that doesn't seem to be replaced after
+ # configure has run on this file.
+ echo @WX_MAJOR_VERSION_NUMBER@.@WX_MINOR_VERSION_NUMBER@
+ ;;
+ --basename)
+ echo @WX_LIBRARY_BASENAME@
+ ;;
+ --static)
+ static_flag=yes
+ ;;
+ --cppflags)
+ cppflags
+ ;;
--cflags)
- if test @includedir@ != /usr/include ; then
- if test @includedir@ != /usr/include/c++ ; then
- includes=-I@includedir@
- fi
- fi
- includes="$includes -I@libdir@/wx/include"
- echo $includes @CODE_GEN_FLAGS@ @WXDEBUG_DEFINE@ @TOOLKIT_DEF@ @TOOLKIT_INCLUDE@
+ echo `cppflags` @CODE_GEN_FLAGS@
+ ;;
+ --cxxflags)
+ echo `cppflags` @CODE_GEN_FLAGS@ @CODE_GEN_FLAGS_CXX@
+ ;;
+ --ldflags)
+ echo @LDFLAGS_EXE@
+ ;;
+ --rezflags)
+ echo @MACRESWXCONFIG@
;;
--libs)
- if test @libdir@ != /usr/lib ; then
- libs="-L@libdir@"
+ if test "@libdir@" != "/usr/lib" \
+ -a \( "${cross_compiling}" != "yes" \
+ -o "@libdir@" != "/usr/${target}/lib" \) ;
+ then
+ libs="-L@libdir@"
+ fi
+
+ if test $static_flag = yes ; then
+ echo "$libs @LDFLAGS@ @WXCONFIG_RPATH@ @libdir@/@WXCONFIG_LIBS_STATIC@ @EXTRALIBS_GUI@ @LIBS@ @DMALLOC_LIBS@"
+ else
+ echo $libs @LDFLAGS@ @WXCONFIG_RPATH@ @WXCONFIG_LIBS@ @DMALLOC_LIBS@
+ fi
+
+ ;;
+ --gl-libs)
+ if test $static_flag = yes -a "x" != "x@WXCONFIG_LIBS_STATIC_GL@" ; then
+ gllibs="@libdir@/@WXCONFIG_LIBS_STATIC_GL@"
+ else
+ gllibs="@WXCONFIG_LIBS_GL@"
fi
- echo $libs -l@WX_LIBRARY@ @EXTRA_LIBS@
+ echo @LDFLAGS_GL@ $gllibs
;;
--cc)
echo $CC
echo $LD
;;
*)
- echo "${usage}" 1>&2
- exit 1
+ usage 1 1>&2
;;
esac
shift
projects / wxWidgets.git / blobdiff