Ensure that the command-line compiler and tools (including
nmake) are installed and ready to run. Depending on your
-installation there may be a batch file (named something like
-VCVARS32.BAT) that needs to be run to set correct environment
-varaibles and PATH entries.
+installation there may be a batch file (commonly named VCVARS32.BAT)
+that needs to be run to set correct environment variables and PATH entries.
Continue with item c) below.
-b) If using the GNU Mingw32 or GNU Cygwin32 compilers
+b) If using the MinGW or Cygwin compilers
-You can get Mingw32 from http://www.mingw.org
+You can get MinGW from http://www.mingw.org/
-Cygwin32 is available at http://www.cygwin.com
+Cygwin is available at http://www.cygwin.com/
-The makefile might have small problems with Cygwin's tools
-so it is recommended to use Mingw32 and its toolchain instead
-if possible.
+If you are using Cygwin or MinGW together with the MSYS environment, you
+can build the library using configure (see "Unix ports" and
+"Windows using configure" below). You can also
+build wxWindows without configure using native makefile, but only with
+MinGW. Using Cygwin together with Windows makefile is no longer supported.
+
+If building with MinGW without configure:
-> Set your path so that it includes the directory
where your compiler and tools reside
--> If your are using an old Mingw32 version (gcc-2.95 or older),
- you might need to fix some headers with the patches contained
- in the wxWin\Mingw32-gcc295.patches file. PLEASE APPLY THESE
- PATCHES BY HAND! There are apparently a few different versions
- of the headers floating around. Note that these patches are
- not needed if you are using Mingw32 gcc-2.95.2 or newer.
-
--> Edit wx/src/makeg95.env and set the MINGW32 variable at the top of
- the file to either 1 (you have Mingw32) or 0 (you have Cygwin32).
- If using MINGW32, also set the MINGW32VERSION variable
- appropiately.
+-> Make sure you have GNU Make installed. It must be Windows native version.
+ Download it from http://www.mingw.org, the executable will be called
+ mingw32-make.exe.
+
+-> Modern version of MinGW is required; preferably MinGW 2.0 (with gcc3),
+ but MinGW with gcc-2.95.3 will suffice. If you are using 2.95, you will
+ have to change variable GCC_VERSION in config.gcc (see msw/install.txt
+ for details).
+
+If using configure, Unix instructions apply.
c) Build instructions
--> Assumming that you installed the wxWindows sources
- into c:\wxWin
--> Copy c:\wxWin\include\wx\msw\setup0.h
- to c:\wxWin\include\wx\msw\setup.h
--> Edit c:\wxWin\include\wx\msw\setup.h so that
- most features are enabled (i.e. defined to 1), for example:
- #define wxUSE_ODBC 0
- #define wxUSE_SOCKETS 1
- #define wxUSE_HTML 1
- #define wxUSE_THREADS 1
- #define wxUSE_FS_INET 0
- #define wxUSE_FS_ZIP 1
- #define wxUSE_BUSYINFO 1
- #define wxUSE_DYNLIB_CLASS 1
- #define wxUSE_ZIPSTREAM 1
- #define wxUSE_LIBJPEG 1
- #define wxUSE_LIBPNG 1
+Assumming that you installed the wxWindows sources
+into c:\wxWindows:
+
+-> Copy c:\wxWindows\include\wx\msw\setup0.h
+ to c:\wxWindows\include\wx\msw\setup.h
+-> Edit c:\wxWindows\include\wx\msw\setup.h to choose
+ the features you would like to compile wxWindows with[out].
and std iostreams are disabled with
#define wxUSE_STD_IOSTREAM 0
--> type: cd c:\wxWin\src\msw
--> type: make -f makefile.g95 (if using GNU tools)
+-> type: cd c:\wxWindows\build\msw
+-> type: make -f makefile.gcc (if using GNU tools)
or type: nmake -f makefile.vc (if using MS VC++)
+etc.
+
+ See also docs/msw/install.txt for additional compilation options.
d) Borland (including free command line tools)
Download tools from http://www.borland.com/downloads/
- See docs/msw/install.txt for details; in brief
+ See docs/msw/install.txt for details; in brief:
+
+-> type cd c:\wxWindows\build\msw
+-> type make -f makefile.bcc
+
+You can customize many things in the build process, detailed description is
+in docs/msw/install.txt.
--> type set WXWIN=c:\wxwindows
--> type cd %WXWIN%\src\msw
--> type make -f makefile.b32
II) Unix ports
--------------
configure to create what is needed.
In order to create configure, you need to have the
-GNU autoconf package (version 2.13 or 2.14) installed
+GNU autoconf package (version > 2.54) installed
on your system and type run "autoconf" in the base
directory (or run the autogen.sh script in the same
-directory, which just calls autoconf).
+directory, which just calls autoconf). Note that you usually don't
+need to do this because configure is included in CVS.
Set WXWIN environment variable to the base directory such
as ~/wxWindows (this is actually not really needed).
III) Windows using configure
----------------------------------------
-Take a look at Unix->Windows cross compiling. With minor
-modifications, this should work in Windows if you've got the cygnus
-utilities (bash, GNU make, etc) and either mingw32 or cygwin32 installed.
-See http://www.cygnus.com for these programs, or go straight to their
-ftp server at ftp://sourceware.cygnus.com/pub/cygwin/.
+wxWindows can be built on Windows using MSYS (see
+http://www.mingw.org/), which is a POSIX build environment
+for Windows. With MSYS you can just ./configure && make (see also VII,
+Unix->Windows cross-compiling using configure).
Of course, you can also build the library using plain makefiles (see
section I).
registration) in order to download the Developer Tools installer.
In order to create configure, you need to have the
-GNU autoconf package (version 2.13 or 2.14) installed
+GNU autoconf package (version >= 2.54) installed
on your system and type run "autoconf" in the base
directory (or run the autogen.sh script in the same
directory, which just calls autoconf).
VI) OS/2
----------------------------------------
+No notes.
VII) Unix->Windows cross-compiling using configure
--------------------------------------------------
-First you'll need a cross-compiler; linux glibc binaries of mingw32 and
-cygwin32 (both based on egcs) can be found at
+First you'll need a cross-compiler; linux glibc binaries of MinGW and
+Cygwin (both based on egcs) can be found at
ftp://ftp.objsw.com/pub/crossgcc/linux-x-win32. Alternative binaries,
based on the latest MinGW release can be found at
-http://members.telering.at/jessich/mingw/mingwcross/mingw_cross.html
+http://members.telering.at/jessich/mingw/mingwcross/mingw_cross.html
Otherwise you can compile one yourself.
-[ A Note about cygwin32 and mingw32: the main difference is that cygwin32
+[ A Note about Cygwin and MinGW: the main difference is that Cygwin
binaries are always linked against cygwin.dll. This dll encapsulates most
standard Unix C extensions, which is very handy if you're porting unix
-software to windows. However, wxMSW doesn't need this, so mingw32 is
+software to windows. However, wxMSW doesn't need this, so MinGW is
preferable if you write portable C(++). ]
You might want to build both Unix and Windows binaries in the same source
DLLTOOL=i586-mingw32-dlltool LD=i586-mingw32-ld NM=i586-mingw32-nm \
../configure --host=i586-mingw32 --with-mingw
-(all assuming you're using mingw32)
+(all assuming you're using MinGW)
By default this will compile a DLL, if you want a static library,
specify --disable-shared.
NB: if you are using a very old compiler you risk to get quite a few warnings
about "ANSI C++ forbids implicit conversion from 'void *'" in all places
where va_arg macro is used. This is due to a bug in (some versions of)
- mingw32 headers which may be corrected by upgrading your compier,
+ MinGW headers which may be corrected by upgrading your compier,
otherwise you might edit the file
${install_prefix}/lib/gcc-lib/i586-mingw32/egcs-2.91.57/include/stdarg.h
__gnuc_va_list is char *.
If this is successful, you end up with a wx23_2.dll/libwx23_2.a in win32/lib
-( or just libwx_msw.a if you opted for a static build ).
+(or just libwx_msw.a if you opted for a static build).
Now try building the minimal sample:
-> cd samples/minimal
projects / wxWidgets.git / blobdiff