+ eval "$ac_cv_use_splines"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splines >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLINES" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6
+echo "configure:7478: checking for --enable-validators" >&5
+ no_cache=0
+ # Check whether --enable-validators or --disable-validators was given.
+if test "${enable_validators+set}" = set; then
+ enableval="$enable_validators"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_validators='wxUSE_VALIDATORS=yes'
+ else
+ ac_cv_use_validators='wxUSE_VALIDATORS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_VALIDATORS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_validators='wxUSE_VALIDATORS='$DEFAULT_wxUSE_VALIDATORS
+
+fi
+
+
+ eval "$ac_cv_use_validators"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_validators >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_VALIDATORS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6
+echo "configure:7517: checking for --enable-busyinfo" >&5
+ no_cache=0
+ # Check whether --enable-busyinfo or --disable-busyinfo was given.
+if test "${enable_busyinfo+set}" = set; then
+ enableval="$enable_busyinfo"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=yes'
+ else
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BUSYINFO" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO='$DEFAULT_wxUSE_BUSYINFO
+
+fi
+
+
+ eval "$ac_cv_use_busyinfo"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_busyinfo >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BUSYINFO" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6
+echo "configure:7556: checking for --enable-joystick" >&5
+ no_cache=0
+ # Check whether --enable-joystick or --disable-joystick was given.
+if test "${enable_joystick+set}" = set; then
+ enableval="$enable_joystick"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
+ else
+ ac_cv_use_joystick='wxUSE_JOYSTICK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
+
+fi
+
+
+ eval "$ac_cv_use_joystick"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_JOYSTICK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
+echo "configure:7595: checking for --enable-metafile" >&5
+ no_cache=0
+ # Check whether --enable-metafile or --disable-metafile was given.
+if test "${enable_metafile+set}" = set; then
+ enableval="$enable_metafile"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_metafile='wxUSE_METAFILE=yes'
+ else
+ ac_cv_use_metafile='wxUSE_METAFILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_METAFILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_metafile='wxUSE_METAFILE='$DEFAULT_wxUSE_METAFILE
+
+fi
+
+
+ eval "$ac_cv_use_metafile"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_metafile >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_METAFILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-dragimage""... $ac_c" 1>&6
+echo "configure:7634: checking for --enable-dragimage" >&5
+ no_cache=0
+ # Check whether --enable-dragimage or --disable-dragimage was given.
+if test "${enable_dragimage+set}" = set; then
+ enableval="$enable_dragimage"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE=yes'
+ else
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DRAGIMAGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE='$DEFAULT_wxUSE_DRAGIMAGE
+
+fi
+
+
+ eval "$ac_cv_use_dragimage"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dragimage >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DRAGIMAGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-palette""... $ac_c" 1>&6
+echo "configure:7675: checking for --enable-palette" >&5
+ no_cache=0
+ # Check whether --enable-palette or --disable-palette was given.
+if test "${enable_palette+set}" = set; then
+ enableval="$enable_palette"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_palette='wxUSE_PALETTE=yes'
+ else
+ ac_cv_use_palette='wxUSE_PALETTE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PALETTE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_palette='wxUSE_PALETTE='$DEFAULT_wxUSE_PALETTE
+
+fi
+
+
+ eval "$ac_cv_use_palette"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_palette >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PALETTE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-image""... $ac_c" 1>&6
+echo "configure:7714: checking for --enable-image" >&5
+ no_cache=0
+ # Check whether --enable-image or --disable-image was given.
+if test "${enable_image+set}" = set; then
+ enableval="$enable_image"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_image='wxUSE_IMAGE=yes'
+ else
+ ac_cv_use_image='wxUSE_IMAGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IMAGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_image='wxUSE_IMAGE='$DEFAULT_wxUSE_IMAGE
+
+fi
+
+
+ eval "$ac_cv_use_image"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_image >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IMAGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6
+echo "configure:7753: checking for --enable-gif" >&5
+ no_cache=0
+ # Check whether --enable-gif or --disable-gif was given.
+if test "${enable_gif+set}" = set; then
+ enableval="$enable_gif"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gif='wxUSE_GIF=yes'
+ else
+ ac_cv_use_gif='wxUSE_GIF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GIF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gif='wxUSE_GIF='$DEFAULT_wxUSE_GIF
+
+fi
+
+
+ eval "$ac_cv_use_gif"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gif >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GIF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6
+echo "configure:7792: checking for --enable-pcx" >&5
+ no_cache=0
+ # Check whether --enable-pcx or --disable-pcx was given.
+if test "${enable_pcx+set}" = set; then
+ enableval="$enable_pcx"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pcx='wxUSE_PCX=yes'
+ else
+ ac_cv_use_pcx='wxUSE_PCX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PCX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pcx='wxUSE_PCX='$DEFAULT_wxUSE_PCX
+
+fi
+
+
+ eval "$ac_cv_use_pcx"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pcx >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PCX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
+echo "configure:7831: checking for --enable-pnm" >&5
+ no_cache=0
+ # Check whether --enable-pnm or --disable-pnm was given.
+if test "${enable_pnm+set}" = set; then
+ enableval="$enable_pnm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pnm='wxUSE_PNM=yes'
+ else
+ ac_cv_use_pnm='wxUSE_PNM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PNM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pnm='wxUSE_PNM='$DEFAULT_wxUSE_PNM
+
+fi
+
+
+ eval "$ac_cv_use_pnm"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PNM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-xpm""... $ac_c" 1>&6
+echo "configure:7870: checking for --enable-xpm" >&5
+ no_cache=0
+ # Check whether --enable-xpm or --disable-xpm was given.
+if test "${enable_xpm+set}" = set; then
+ enableval="$enable_xpm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_xpm='wxUSE_XPM=yes'
+ else
+ ac_cv_use_xpm='wxUSE_XPM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_XPM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_xpm='wxUSE_XPM='$DEFAULT_wxUSE_XPM
+
+fi
+
+
+ eval "$ac_cv_use_xpm"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_xpm >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_XPM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+fi
+
+
+ echo "saving argument cache $wx_arg_cache_file"
+ mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file}
+
+
+
+echo $ac_n "checking for toolkit""... $ac_c" 1>&6
+echo "configure:7917: checking for toolkit" >&5
+
+if test "$wxUSE_GUI" = "yes"; then
+
+ if test "$USE_BEOS" = 1; then
+ { echo "configure: error: BeOS GUI is not supported yet, use --disable-gui" 1>&2; exit 1; }
+ fi
+
+ if test "$TOOLKIT_GIVEN" = 1; then
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ eval "$var=`echo \$value | sed -e "s/yes/1/" -e "s/no/0/"`"
+ done
+ else
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ if test "$has_toolkit_in_cache" != 1; then
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ else
+ var=DEFAULT_wxUSE_$toolkit
+ fi
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+ fi
+
+ NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} \
+ + ${wxUSE_WINE:-0} + ${wxUSE_MSW:-0} + ${wxUSE_MGL:-0}`
+
+ case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ # PATH_IFS is autodetected by OS/2's configure (usually ';')
+ NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
+ LEX_STEM="lexyy"
+ ;;
+ *)
+ PATH_IFS=':'
+ LEX_STEM="lex.yy"
+ ;;
+ esac
+
+ case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ { echo "configure: error: Please specify a toolkit - cannot determine the default for ${host}" 1>&2; exit 1; }
+ ;;
+ *)
+ { echo "configure: error: Please specify at most one toolkit (may be some are cached?)" 1>&2; exit 1; }
+ esac
+
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" != x; then
+ cache_var=CACHE_$toolkit
+ eval "cache=\$${cache_var}"
+ if test "$cache" = 1; then
+ echo "$var=$value" >> ${wx_arg_cache_file}
+ fi
+ if test "$value" = 1; then
+ toolkit_echo=`echo $toolkit | tr [A-Z] [a-z]`
+ echo "$ac_t""$toolkit_echo" 1>&6
+ fi
+ fi
+ done
+else
+ PATH_IFS=':'
+ echo "$ac_t""base ($host_alias hosted) only" 1>&6
+fi
+
+
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
projects / wxWidgets.git / blobdiff