"""
InitDialog(self)
- Sends an EVT_INIT_DIALOG event, whose handler usually transfers
- data to the dialog via validators.
+ Sends an EVT_INIT_DIALOG event, whose handler usually transfers data
+ to the dialog via validators.
"""
return _windows_.Panel_InitDialog(*args, **kwargs)
+ def GetClassDefaultAttributes(*args, **kwargs):
+ """
+ GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.Panel_GetClassDefaultAttributes(*args, **kwargs)
+
+ GetClassDefaultAttributes = staticmethod(GetClassDefaultAttributes)
class PanelPtr(Panel):
def __init__(self, this):
val.thisown = 1
return val
+def Panel_GetClassDefaultAttributes(*args, **kwargs):
+ """
+ Panel_GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.Panel_GetClassDefaultAttributes(*args, **kwargs)
+
#---------------------------------------------------------------------------
class ScrolledWindow(Panel):
return _windows_.ScrolledWindow_SetScrollRate(*args, **kwargs)
def GetScrollPixelsPerUnit(*args, **kwargs):
- """
- GetScrollPixelsPerUnit() -> (xUnit, yUnit)
-
- Get the size of one logical unit in physical units.
- """
+ """GetScrollPixelsPerUnit() -> (xUnit, yUnit)"""
return _windows_.ScrolledWindow_GetScrollPixelsPerUnit(*args, **kwargs)
def EnableScrolling(*args, **kwargs):
return _windows_.ScrolledWindow_EnableScrolling(*args, **kwargs)
def GetViewStart(*args, **kwargs):
- """
- GetViewStart() -> (x,y)
-
- Get the view start
- """
+ """GetViewStart() -> (x,y)"""
return _windows_.ScrolledWindow_GetViewStart(*args, **kwargs)
def SetScale(*args, **kwargs):
"""GetTargetWindow(self) -> Window"""
return _windows_.ScrolledWindow_GetTargetWindow(*args, **kwargs)
+ def GetClassDefaultAttributes(*args, **kwargs):
+ """
+ GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.ScrolledWindow_GetClassDefaultAttributes(*args, **kwargs)
+
+ GetClassDefaultAttributes = staticmethod(GetClassDefaultAttributes)
class ScrolledWindowPtr(ScrolledWindow):
def __init__(self, this):
val.thisown = 1
return val
+def ScrolledWindow_GetClassDefaultAttributes(*args, **kwargs):
+ """
+ ScrolledWindow_GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.ScrolledWindow_GetClassDefaultAttributes(*args, **kwargs)
+
#---------------------------------------------------------------------------
STAY_ON_TOP = _windows_.STAY_ON_TOP
"""DoMenuUpdates(self, Menu menu=None)"""
return _windows_.Frame_DoMenuUpdates(*args, **kwargs)
+ def GetClassDefaultAttributes(*args, **kwargs):
+ """
+ GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.Frame_GetClassDefaultAttributes(*args, **kwargs)
+
+ GetClassDefaultAttributes = staticmethod(GetClassDefaultAttributes)
class FramePtr(Frame):
def __init__(self, this):
val.thisown = 1
return val
+def Frame_GetClassDefaultAttributes(*args, **kwargs):
+ """
+ Frame_GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.Frame_GetClassDefaultAttributes(*args, **kwargs)
+
#---------------------------------------------------------------------------
class Dialog(TopLevelWindow):
"""EndModal(self, int retCode)"""
return _windows_.Dialog_EndModal(*args, **kwargs)
+ def GetClassDefaultAttributes(*args, **kwargs):
+ """
+ GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.Dialog_GetClassDefaultAttributes(*args, **kwargs)
+
+ GetClassDefaultAttributes = staticmethod(GetClassDefaultAttributes)
class DialogPtr(Dialog):
def __init__(self, this):
val.thisown = 1
return val
+def Dialog_GetClassDefaultAttributes(*args, **kwargs):
+ """
+ Dialog_GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.Dialog_GetClassDefaultAttributes(*args, **kwargs)
+
#---------------------------------------------------------------------------
class MiniFrame(Frame):
"""GetBorderY(self) -> int"""
return _windows_.StatusBar_GetBorderY(*args, **kwargs)
+ def GetClassDefaultAttributes(*args, **kwargs):
+ """
+ GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.StatusBar_GetClassDefaultAttributes(*args, **kwargs)
+
+ GetClassDefaultAttributes = staticmethod(GetClassDefaultAttributes)
class StatusBarPtr(StatusBar):
def __init__(self, this):
val.thisown = 1
return val
+def StatusBar_GetClassDefaultAttributes(*args, **kwargs):
+ """
+ StatusBar_GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.StatusBar_GetClassDefaultAttributes(*args, **kwargs)
+
#---------------------------------------------------------------------------
SP_NOBORDER = _windows_.SP_NOBORDER
SPLIT_DRAG_LEFT_DOWN = _windows_.SPLIT_DRAG_LEFT_DOWN
class SplitterWindow(_core.Window):
"""
- wx.SplitterWindow manages up to two subwindows or panes,
- with an optional vertical or horizontal split which can be
- used with the mouse or programmatically.
-
+ wx.SplitterWindow manages up to two subwindows or panes, with an
+ optional vertical or horizontal split which can be used with the mouse
+ or programmatically.
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxSplitterWindow instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
SetSplitMode(self, int mode)
Sets the split mode. The mode can be wx.SPLIT_VERTICAL or
- wx.SPLIT_HORIZONTAL. This only sets the internal variable;
- does not update the display.
+ wx.SPLIT_HORIZONTAL. This only sets the internal variable; does not
+ update the display.
"""
return _windows_.SplitterWindow_SetSplitMode(*args, **kwargs)
"""
Initialize(self, Window window)
- Initializes the splitter window to have one pane. This
- should be called if you wish to initially view only a single
- pane in the splitter window.
+ Initializes the splitter window to have one pane. This should be
+ called if you wish to initially view only a single pane in the
+ splitter window.
"""
return _windows_.SplitterWindow_Initialize(*args, **kwargs)
SplitVertically(self, Window window1, Window window2, int sashPosition=0) -> bool
Initializes the left and right panes of the splitter window.
-
- window1 The left pane.
- window2 The right pane.
- sashPosition The initial position of the sash. If this
- value is positive, it specifies the size
- of the left pane. If it is negative, it is
- absolute value gives the size of the right
- pane. Finally, specify 0 (default) to
- choose the default position (half of the
- total window width).
-
- Returns True if successful, False otherwise (the window was
- already split).
-
- SplitVertically should be called if you wish to initially
- view two panes. It can also be called at any subsequent
- time, but the application should check that the window is
- not currently split using IsSplit.
"""
return _windows_.SplitterWindow_SplitVertically(*args, **kwargs)
SplitHorizontally(self, Window window1, Window window2, int sashPosition=0) -> bool
Initializes the top and bottom panes of the splitter window.
-
- window1 The top pane.
- window2 The bottom pane.
- sashPosition The initial position of the sash. If this
- value is positive, it specifies the size
- of the upper pane. If it is negative, it
- is absolute value gives the size of the
- lower pane. Finally, specify 0 (default)
- to choose the default position (half of
- the total window height).
-
- Returns True if successful, False otherwise (the window was
- already split).
-
- SplitHorizontally should be called if you wish to initially
- view two panes. It can also be called at any subsequent
- time, but the application should check that the window is
- not currently split using IsSplit.
"""
return _windows_.SplitterWindow_SplitHorizontally(*args, **kwargs)
"""
Unsplit(self, Window toRemove=None) -> bool
- Unsplits the window. Pass the pane to remove, or None to
- remove the right or bottom pane. Returns True if
- successful, False otherwise (the window was not split).
+ Unsplits the window. Pass the pane to remove, or None to remove the
+ right or bottom pane. Returns True if successful, False otherwise (the
+ window was not split).
This function will not actually delete the pane being
removed; it sends EVT_SPLITTER_UNSPLIT which can be handled
ReplaceWindow(self, Window winOld, Window winNew) -> bool
This function replaces one of the windows managed by the
- SplitterWindow with another one. It is in general better to
- use it instead of calling Unsplit() and then resplitting the
- window back because it will provoke much less flicker. It is
- valid to call this function whether the splitter has two
- windows or only one.
-
- Both parameters should be non-None and winOld must specify
- one of the windows managed by the splitter. If the
- parameters are incorrect or the window couldn't be replaced,
- False is returned. Otherwise the function will return True,
- but please notice that it will not Destroy the replaced
- window and you may wish to do it yourself.
+ SplitterWindow with another one. It is in general better to use it
+ instead of calling Unsplit() and then resplitting the window back
+ because it will provoke much less flicker. It is valid to call this
+ function whether the splitter has two windows or only one.
+
+ Both parameters should be non-None and winOld must specify one of the
+ windows managed by the splitter. If the parameters are incorrect or
+ the window couldn't be replaced, False is returned. Otherwise the
+ function will return True, but please notice that it will not Destroy
+ the replaced window and you may wish to do it yourself.
"""
return _windows_.SplitterWindow_ReplaceWindow(*args, **kwargs)
"""
UpdateSize(self)
- Causes any pending sizing of the sash and child panes to
- take place immediately.
+ Causes any pending sizing of the sash and child panes to take place
+ immediately.
- Such resizing normally takes place in idle time, in order to
- wait for layout to be completed. However, this can cause
- unacceptable flicker as the panes are resized after the
- window has been shown. To work around this, you can perform
- window layout (for example by sending a size event to the
- parent window), and then call this function, before showing
- the top-level window.
+ Such resizing normally takes place in idle time, in order to wait for
+ layout to be completed. However, this can cause unacceptable flicker
+ as the panes are resized after the window has been shown. To work
+ around this, you can perform window layout (for example by sending a
+ size event to the parent window), and then call this function, before
+ showing the top-level window.
"""
return _windows_.SplitterWindow_UpdateSize(*args, **kwargs)
"""
SetSashPosition(self, int position, bool redraw=True)
- Sets the sash position, in pixels. If redraw is Ttrue then
- the panes are resized and the sash and border are redrawn.
+ Sets the sash position, in pixels. If redraw is Ttrue then the panes
+ are resized and the sash and border are redrawn.
"""
return _windows_.SplitterWindow_SetSashPosition(*args, **kwargs)
Sets the minimum pane size in pixels.
- The default minimum pane size is zero, which means that
- either pane can be reduced to zero by dragging the sash,
- thus removing one of the panes. To prevent this behaviour (and
- veto out-of-range sash dragging), set a minimum size,
- for example 20 pixels. If the wx.SP_PERMIT_UNSPLIT style is
- used when a splitter window is created, the window may be
- unsplit even if minimum size is non-zero.
+ The default minimum pane size is zero, which means that either pane
+ can be reduced to zero by dragging the sash, thus removing one of the
+ panes. To prevent this behaviour (and veto out-of-range sash
+ dragging), set a minimum size, for example 20 pixels. If the
+ wx.SP_PERMIT_UNSPLIT style is used when a splitter window is created,
+ the window may be unsplit even if minimum size is non-zero.
"""
return _windows_.SplitterWindow_SetMinimumPaneSize(*args, **kwargs)
"""GetNeedUpdating(self) -> bool"""
return _windows_.SplitterWindow_GetNeedUpdating(*args, **kwargs)
+ def GetClassDefaultAttributes(*args, **kwargs):
+ """
+ GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.SplitterWindow_GetClassDefaultAttributes(*args, **kwargs)
+
+ GetClassDefaultAttributes = staticmethod(GetClassDefaultAttributes)
class SplitterWindowPtr(SplitterWindow):
def __init__(self, this):
val.thisown = 1
return val
+def SplitterWindow_GetClassDefaultAttributes(*args, **kwargs):
+ """
+ SplitterWindow_GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
+
+ Get the default attributes for this class. This is useful if you want
+ to use the same font or colour in your own control as in a standard
+ control -- which is a much better idea than hard coding specific
+ colours or fonts which might look completely out of place on the
+ user's system, especially if it uses themes.
+
+ The variant parameter is only relevant under Mac currently and is
+ ignore under other platforms. Under Mac, it will change the size of
+ the returned font. See `wx.Window.SetWindowVariant` for more about
+ this.
+ """
+ return _windows_.SplitterWindow_GetClassDefaultAttributes(*args, **kwargs)
+
class SplitterEvent(_core.NotifyEvent):
"""This class represents the events generated by a splitter control."""
def __repr__(self):
"""
SetSashPosition(self, int pos)
- This funciton is only meaningful during
- EVT_SPLITTER_SASH_POS_CHANGING and
- EVT_SPLITTER_SASH_POS_CHANGED events. In the case of
- _CHANGED events, sets the the new sash position. In the case
- of _CHANGING events, sets the new tracking bar position so
- visual feedback during dragging will represent that change
- that will actually take place. Set to -1 from the event
- handler code to prevent repositioning.
+ This funciton is only meaningful during EVT_SPLITTER_SASH_POS_CHANGING
+ and EVT_SPLITTER_SASH_POS_CHANGED events. In the case of _CHANGED
+ events, sets the the new sash position. In the case of _CHANGING
+ events, sets the new tracking bar position so visual feedback during
+ dragging will represent that change that will actually take place. Set
+ to -1 from the event handler code to prevent repositioning.
"""
return _windows_.SplitterEvent_SetSashPosition(*args, **kwargs)
"""
GetSashPosition(self) -> int
- Returns the new sash position while in
- EVT_SPLITTER_SASH_POS_CHANGING and
- EVT_SPLITTER_SASH_POS_CHANGED events.
+ Returns the new sash position while in EVT_SPLITTER_SASH_POS_CHANGING
+ and EVT_SPLITTER_SASH_POS_CHANGED events.
"""
return _windows_.SplitterEvent_GetSashPosition(*args, **kwargs)
"""
GetWindowBeingRemoved(self) -> Window
- Returns a pointer to the window being removed when a
- splitter window is unsplit.
+ Returns a pointer to the window being removed when a splitter window
+ is unsplit.
"""
return _windows_.SplitterEvent_GetWindowBeingRemoved(*args, **kwargs)
"""
ScrollPages(self, int pages) -> bool
- If the platform and window class supports it, scrolls the window by
+ If the platform and window class supports it, scrolls the window by
the given number of pages down, if pages is positive, or up if pages
is negative. Returns True if the window was scrolled, False if it was
already on top/bottom and nothing was done.
"""SetItemCount(self, size_t count)"""
return _windows_.HtmlListBox_SetItemCount(*args, **kwargs)
+ def GetFileSystem(*args, **kwargs):
+ """GetFileSystem(self) -> FileSystem"""
+ return _windows_.HtmlListBox_GetFileSystem(*args, **kwargs)
+
class HtmlListBoxPtr(HtmlListBox):
def __init__(self, this):
class ColourData(_core.Object):
"""
This class holds a variety of information related to the colour
- chooser dialog. This class is used to transfer settings and results
- to and from the `wx.ColourDialog`.
+ chooser dialog, used to transfer settings and results to and from the
+ `wx.ColourDialog`.
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxColourData instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
"""
wx.DirDialog allows the user to select a directory by browising the
file system.
-
-
- Window Styles
- --------------
- ==================== ==========================================
- wx.DD_NEW_DIR_BUTTON Add 'Create new directory' button and allow
- directory names to be editable. On Windows
- the new directory button is only available
- with recent versions of the common dialogs.
- ==================== ==========================================
-
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxDirDialog instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
"""
wx.FileDialog allows the user to select one or more files from the
filesystem.
-
- In Windows, this is the common file selector dialog. On X based
- platforms a generic alternative is used. The path and filename are
- distinct elements of a full file pathname. If path is "", the
- current directory will be used. If filename is "", no default
- filename will be supplied. The wildcard determines what files are
- displayed in the file selector, and file extension supplies a type
- extension for the required filename.
-
- Both the X and Windows versions implement a wildcard filter. Typing a
- filename containing wildcards (*, ?) in the filename text item, and
- clicking on Ok, will result in only those files matching the pattern
- being displayed. The wildcard may be a specification for multiple
- types of file with a description for each, such as::
-
- "BMP files (*.bmp)|*.bmp|GIF files (*.gif)|*.gif"
-
-
- Window Styles
- --------------
- ================== ==========================================
- wx.OPEN This is an open dialog.
-
- wx.SAVE This is a save dialog.
-
- wx.HIDE_READONLY For open dialog only: hide the checkbox
- allowing to open the file in read-only mode.
-
- wx.OVERWRITE_PROMPT For save dialog only: prompt for a confirmation
- if a file will be overwritten.
-
- wx.MULTIPLE For open dialog only: allows selecting multiple
- files.
-
- wx.CHANGE_DIR Change the current working directory to the
- directory where the file(s) chosen by the user
- are.
- ================== ==========================================
-
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxFileDialog instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
self._setOORInfo(self)
def SetSelections(*args, **kwargs):
- """
- SetSelections(List selections)
-
- Specify the items in the list that should be selected, using a list of
- integers.
- """
+ """SetSelections(List selections)"""
return _windows_.MultiChoiceDialog_SetSelections(*args, **kwargs)
def GetSelections(*args, **kwargs):
"""
This class provides a simple dialog that shows a single or multi-line
message, with a choice of OK, Yes, No and/or Cancel buttons.
-
-
- Window Styles
- --------------
- ================= =============================================
- wx.OK Show an OK button.
- wx.CANCEL Show a Cancel button.
- wx.YES_NO Show Yes and No buttons.
- wx.YES_DEFAULT Used with wxYES_NO, makes Yes button the
- default - which is the default behaviour.
- wx.NO_DEFAULT Used with wxYES_NO, makes No button the default.
- wx.ICON_EXCLAMATION Shows an exclamation mark icon.
- wx.ICON_HAND Shows an error icon.
- wx.ICON_ERROR Shows an error icon - the same as wxICON_HAND.
- wx.ICON_QUESTION Shows a question mark icon.
- wx.ICON_INFORMATION Shows an information (i) icon.
- wx.STAY_ON_TOP The message box stays on top of all other
- window, even those of the other applications
- (Windows only).
- ================= =============================================
-
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxMessageDialog instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
"""
A dialog that shows a short message and a progress bar. Optionally, it
can display an ABORT button.
-
- Window Styles
- --------------
- ================= =============================================
- wx.PD_APP_MODAL Make the progress dialog modal. If this flag is
- not given, it is only "locally" modal -
- that is the input to the parent window is
- disabled, but not to the other ones.
-
- wx.PD_AUTO_HIDE Causes the progress dialog to disappear from
- screen as soon as the maximum value of the
- progress meter has been reached.
-
- wx.PD_CAN_ABORT This flag tells the dialog that it should have
- a "Cancel" button which the user may press. If
- this happens, the next call to Update() will
- return false.
-
- wx.PD_ELAPSED_TIME This flag tells the dialog that it should show
- elapsed time (since creating the dialog).
-
- wx.PD_ESTIMATED_TIME This flag tells the dialog that it should show
- estimated time.
-
- wx.PD_REMAINING_TIME This flag tells the dialog that it should show
- remaining time.
- ================= =============================================
-
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxProgressDialog instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
Note that all SetXXX() methods may only be called before showing the
dialog and calling them has no effect later.
-
- Flags
- -----
- ================ ===============================================
- wx.FR_DOWN Downward search/replace selected (otherwise,
- upwards)
-
- wx.FR_WHOLEWORD Whole word search/replace selected
-
- wx.FR_MATCHCASE Case sensitive search/replace selected
- (otherwise, case insensitive)
- ================ ===============================================
-
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxFindReplaceData instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
that unlike for the other standard dialogs this one must have a parent
window. Also note that there is no way to use this dialog in a modal
way; it is always, by design and implementation, modeless.
-
-
- Window Styles
- -------------
-
- ===================== =========================================
- wx.FR_REPLACEDIALOG replace dialog (otherwise find dialog)
-
- wx.FR_NOUPDOWN don't allow changing the search direction
-
- wx.FR_NOMATCHCASE don't allow case sensitive searching
-
- wx.FR_NOWHOLEWORD don't allow whole word searching
- ===================== =========================================
-
"""
def __repr__(self):
return "<%s.%s; proxy of C++ wxFindReplaceDialog instance at %s>" % (self.__class__.__module__, self.__class__.__name__, self.this,)
"""_setCallbackInfo(self, PyObject self, PyObject _class)"""
return _windows_.PyWindow__setCallbackInfo(*args, **kwargs)
+ def SetBestSize(*args, **kwargs):
+ """SetBestSize(self, Size size)"""
+ return _windows_.PyWindow_SetBestSize(*args, **kwargs)
+
def base_DoMoveWindow(*args, **kwargs):
"""base_DoMoveWindow(self, int x, int y, int width, int height)"""
return _windows_.PyWindow_base_DoMoveWindow(*args, **kwargs)
"""base_ApplyParentThemeBackground(self, Colour c)"""
return _windows_.PyWindow_base_ApplyParentThemeBackground(*args, **kwargs)
+ def base_GetDefaultAttributes(*args, **kwargs):
+ """base_GetDefaultAttributes(self) -> VisualAttributes"""
+ return _windows_.PyWindow_base_GetDefaultAttributes(*args, **kwargs)
+
class PyWindowPtr(PyWindow):
def __init__(self, this):
"""_setCallbackInfo(self, PyObject self, PyObject _class)"""
return _windows_.PyPanel__setCallbackInfo(*args, **kwargs)
+ def SetBestSize(*args, **kwargs):
+ """SetBestSize(self, Size size)"""
+ return _windows_.PyPanel_SetBestSize(*args, **kwargs)
+
def base_DoMoveWindow(*args, **kwargs):
"""base_DoMoveWindow(self, int x, int y, int width, int height)"""
return _windows_.PyPanel_base_DoMoveWindow(*args, **kwargs)
"""base_ApplyParentThemeBackground(self, Colour c)"""
return _windows_.PyPanel_base_ApplyParentThemeBackground(*args, **kwargs)
+ def base_GetDefaultAttributes(*args, **kwargs):
+ """base_GetDefaultAttributes(self) -> VisualAttributes"""
+ return _windows_.PyPanel_base_GetDefaultAttributes(*args, **kwargs)
+
class PyPanelPtr(PyPanel):
def __init__(self, this):
"""_setCallbackInfo(self, PyObject self, PyObject _class)"""
return _windows_.PyScrolledWindow__setCallbackInfo(*args, **kwargs)
+ def SetBestSize(*args, **kwargs):
+ """SetBestSize(self, Size size)"""
+ return _windows_.PyScrolledWindow_SetBestSize(*args, **kwargs)
+
def base_DoMoveWindow(*args, **kwargs):
"""base_DoMoveWindow(self, int x, int y, int width, int height)"""
return _windows_.PyScrolledWindow_base_DoMoveWindow(*args, **kwargs)
"""base_ApplyParentThemeBackground(self, Colour c)"""
return _windows_.PyScrolledWindow_base_ApplyParentThemeBackground(*args, **kwargs)
+ def base_GetDefaultAttributes(*args, **kwargs):
+ """base_GetDefaultAttributes(self) -> VisualAttributes"""
+ return _windows_.PyScrolledWindow_base_GetDefaultAttributes(*args, **kwargs)
+
class PyScrolledWindowPtr(PyScrolledWindow):
def __init__(self, this):
projects / wxWidgets.git / blobdiff