-/* ./include/wx/motif/setup.h. Generated automatically by configure. */
-/* setup.h
-
- Do not edit this file. It is autogenerated by configure.
-
- Leave the following blank line there!! Autoheader needs it. */
-\f
-
-/* ------------------------------------------------------------------------ */
-/* Features as requested by configure */
-/* ------------------------------------------------------------------------ */
+/////////////////////////////////////////////////////////////////////////////
+// Name: wx/motif/setup.h
+// Purpose: Configuration for the library
+// Author: Julian Smart
+// Modified by:
+// Created: 01/02/97
+// RCS-ID: $Id$
+// Copyright: (c) Julian Smart
+// Licence: wxWindows licence
+/////////////////////////////////////////////////////////////////////////////
+
+#ifndef _WX_SETUP_H_
+#define _WX_SETUP_H_
+
+/* --- start common options --- */
+// ----------------------------------------------------------------------------
+// global settings
+// ----------------------------------------------------------------------------
+
+// define this to 0 when building wxBase library - this can also be done from
+// makefile/project file overriding the value here
+#ifndef wxUSE_GUI
+ #define wxUSE_GUI 1
+#endif // wxUSE_GUI
+
+// ----------------------------------------------------------------------------
+// compatibility settings
+// ----------------------------------------------------------------------------
+
+// This setting determines the compatibility with 2.4 API: set it to 1 to
+// enable it but please consider updating your code instead.
+//
+// Default is 0
+//
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_4 0
+
+// This setting determines the compatibility with 2.6 API: set it to 0 to
+// flag all cases of using deprecated functions.
+//
+// Default is 1 but please try building your code with 0 as the default will
+// change to 0 in the next version and the deprecated functions will disappear
+// in the version after it completely.
+//
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_6 1
+
+// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
+// default system font is used for wxWindow::GetCharWidth/Height() instead of
+// the current font.
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxDIALOG_UNIT_COMPATIBILITY 0
+
+// ----------------------------------------------------------------------------
+// debugging settings
+// ----------------------------------------------------------------------------
+
+// Generic comment about debugging settings: they are very useful if you don't
+// use any other memory leak detection tools such as Purify/BoundsChecker, but
+// are probably redundant otherwise. Also, Visual C++ CRT has the same features
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
+// may prefer to use it instead of built in memory debugging code because it is
+// faster and more fool proof.
+//
+// Using VC++ CRT memory debugging is enabled by default in debug mode
+// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
+// and if __NO_VC_CRTDBG__ is not defined.
+
+// If 1, enables wxDebugContext, for writing error messages to file, etc. If
+// __WXDEBUG__ is not defined, will still use the normal memory operators.
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_DEBUG_CONTEXT 0
+
+// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
+// __WXDEBUG__ is also defined.
+//
+// WARNING: this code may not work with all architectures, especially if
+// alignment is an issue. This switch is currently ignored for mingw / cygwin
+//
+// Default is 0
+//
+// Recommended setting: 1 if you are not using a memory debugging tool, else 0
+#define wxUSE_MEMORY_TRACING 0
-#ifndef __GTKSETUPH__
-#define __GTKSETUPH__
+// In debug mode, cause new and delete to be redefined globally.
+// If this causes problems (e.g. link errors which is a common problem
+// especially if you use another library which also redefines the global new
+// and delete), set this to 0.
+// This switch is currently ignored for mingw / cygwin
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-#ifdef __GNUG__
-#pragma interface
+// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
+// this causes problems (e.g. link errors), set this to 0. You may need to set
+// this to 0 if using templates (at least for VC++). This switch is currently
+// ignored for mingw / cygwin / CodeWarrior
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_DEBUG_NEW_ALWAYS 0
+
+// wxHandleFatalExceptions() may be used to catch the program faults at run
+// time and, instead of terminating the program with a usual GPF message box,
+// call the user-defined wxApp::OnFatalException() function. If you set
+// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
+//
+// This setting is for Win32 only and can only be enabled if your compiler
+// supports Win32 structured exception handling (currently only VC++ does)
+//
+// Default is 1
+//
+// Recommended setting: 1 if your compiler supports it.
+#define wxUSE_ON_FATAL_EXCEPTION 1
+
+// Set this to 1 to be able to generate a human-readable (unlike
+// machine-readable minidump created by wxCrashReport::Generate()) stack back
+// trace when your program crashes using wxStackWalker
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_STACKWALKER 1
+
+// Set this to 1 to compile in wxDebugReport class which allows you to create
+// and optionally upload to your web site a debug report consisting of back
+// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, it is compiled into a separate library so there
+// is no overhead if you don't use it
+#define wxUSE_DEBUGREPORT 1
+
+// ----------------------------------------------------------------------------
+// Unicode support
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
+// defined as wchar_t, wxString will use Unicode internally. If you set this
+// to 1, you must use wxT() macro for all literal strings in the program.
+//
+// Unicode is currently only fully supported under Windows NT/2000/XP
+// (Windows 9x doesn't support it and the programs compiled in Unicode mode
+// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
+//
+// Default is 0
+//
+// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
+#ifndef wxUSE_UNICODE
+ #define wxUSE_UNICODE 0
#endif
-/* define the system to compile */
-#define __UNIX__ 1
-#define __LINUX__ 1
-/* #undef __SGI__ */
-/* #undef __HPUX__ */
-/* #undef __SYSV__ */
-/* #undef __SVR4__ */
-/* #undef __AIX__ */
-/* #undef __SUN__ */
-/* #undef __SOLARIS__ */
-/* #undef __SUNOS__ */
-/* #undef __ALPHA__ */
-/* #undef __OSF__ */
-/* #undef __BSD__ */
-/* #undef __FREEBSD__ */
-/* #undef __VMS__ */
-/* #undef __ULTRIX__ */
-/* #undef __DATA_GENERAL__ */
-
-/* ------------------------------------------------------------------------ */
-/* compiler options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Supports bool type
- */
-#define HAVE_BOOL 1
-
-/* ------------------------------------------------------------------------ */
-/* library options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Use zlib
- */
-#define wxUSE_ZLIB 1
-/*
- * Use libpng
- */
-#define wxUSE_LIBPNG 1
-/*
- * Use libjpeg
- */
-#define wxUSE_LIBJPEG 0
-/*
- * Use GIF
- */
-#define wxUSE_LIBGIF 1
-/*
- * Use PCX
- */
-#define wxUSE_PCX 1
-/*
- * Use PNM
- */
-#define wxUSE_PNM 1
+// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
+// compiling the program in Unicode mode. More precisely, it will be possible
+// to construct wxString from a wide (Unicode) string and convert any wxString
+// to Unicode.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_WCHAR_T 1
+
+// ----------------------------------------------------------------------------
+// global features
+// ----------------------------------------------------------------------------
+
+// Compile library in exception-safe mode? If set to 1, the library will try to
+// behave correctly in presence of exceptions (even though it still will not
+// use the exceptions itself) and notify the user code about any unhandled
+// exceptions. If set to 0, propagation of the exceptions through the library
+// code will lead to undefined behaviour -- but the code itself will be
+// slightly smaller and faster.
+//
+// Note that like wxUSE_THREADS this option is automatically set to 0 if
+// wxNO_EXCEPTIONS is defined.
+//
+// Default is 1
+//
+// Recommended setting: depends on whether you intend to use C++ exceptions
+// in your own code (1 if you do, 0 if you don't)
+#define wxUSE_EXCEPTIONS 1
+
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0 (this is still work in progress...)
+#define wxUSE_EXTENDED_RTTI 0
+
+// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
+// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
+// and for wxHashMap to be implemented with templates.
+//
+// Default is 0
+//
+// Recommended setting: YMMV
+#define wxUSE_STL 0
+
+// Support for message/error logging. This includes wxLogXXX() functions and
+// wxLog and derived classes. Don't set this to 0 unless you really know what
+// you are doing.
+//
+// Default is 1
+//
+// Recommended setting: 1 (always)
+#define wxUSE_LOG 1
+
+// Recommended setting: 1
+#define wxUSE_LOGWINDOW 1
+
+// Recommended setting: 1
+#define wxUSE_LOGGUI 1
+
+// Recommended setting: 1
+#define wxUSE_LOG_DIALOG 1
+
+// Support for command line parsing using wxCmdLineParser class.
+//
+// Default is 1
+//
+// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
+#define wxUSE_CMDLINE_PARSER 1
+
+// Support for multithreaded applications: if 1, compile in thread classes
+// (thread.h) and make the library a bit more thread safe. Although thread
+// support is quite stable by now, you may still consider recompiling the
+// library without it if you have no use for it - this will result in a
+// somewhat smaller and faster operation.
+//
+// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
+// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
+// build/msw/config.* file this value will have no effect.
+//
+// Default is 1
+//
+// Recommended setting: 0 unless you do plan to develop MT applications
+#define wxUSE_THREADS 1
+
+// If enabled, compiles wxWidgets streams classes
+//
+// wx stream classes are used for image IO, process IO redirection, network
+// protocols implementation and much more and so disabling this results in a
+// lot of other functionality being lost.
+//
+// Default is 1
+//
+// Recommended setting: 1 as setting it to 0 disables many other things
+#define wxUSE_STREAMS 1
+
+// Use standard C++ streams if 1 instead of wx streams in some places. If
+// disabled (default), wx streams are used everywhere and wxWidgets doesn't
+// depend on the standard streams library.
+//
+// Notice that enabling this does not replace wx streams with std streams
+// everywhere, in a lot of places wx streams are used no matter what.
+//
+// Default is 0
+//
+// Recommended setting: 1 if you use the standard streams anyhow and so
+// dependency on the standard streams library is not a
+// problem
+#define wxUSE_STD_IOSTREAM 0
+
+// Enable conversion to standard C++ string if 1.
+#define wxUSE_STD_STRING 0
+
+// ----------------------------------------------------------------------------
+// non GUI features selection
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
+// integer which is implemented in terms of native 64 bit integers if any or
+// uses emulation otherwise.
+//
+// This class is required by wxDateTime and so you should enable it if you want
+// to use wxDateTime. For most modern platforms, it will use the native 64 bit
+// integers in which case (almost) all of its functions are inline and it
+// almost does not take any space, so there should be no reason to switch it
+// off.
+//
+// Recommended setting: 1
+#define wxUSE_LONGLONG 1
+
+// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
+// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
+//
+// Default is 1
+//
+// Recommended setting: 1 (wxFile is highly recommended as it is required by
+// i18n code, wxFileConfig and others)
+#define wxUSE_FILE 1
+#define wxUSE_FFILE 1
+
+// Use wxFSVolume class providing access to the configured/active mount points
+//
+// Default is 1
+//
+// Recommended setting: 1 (but may be safely disabled if you don't use it)
+#define wxUSE_FSVOLUME 1
+
+// Use wxStandardPaths class which allows to retrieve some standard locations
+// in the file system
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be disabled to save space, but not much)
+#define wxUSE_STDPATHS 1
+
+// use wxTextBuffer class: required by wxTextFile
+#define wxUSE_TEXTBUFFER 1
+
+// use wxTextFile class: requires wxFile and wxTextBuffer, required by
+// wxFileConfig
+#define wxUSE_TEXTFILE 1
+
+// i18n support: _() macro, wxLocale class. Requires wxTextFile.
+#define wxUSE_INTL 1
+
+// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
+// allow to manipulate dates, times and time intervals. wxDateTime replaces the
+// old wxTime and wxDate classes which are still provided for backwards
+// compatibility (and implemented in terms of wxDateTime).
+//
+// Note that this class is relatively new and is still officially in alpha
+// stage because some features are not yet (fully) implemented. It is already
+// quite useful though and should only be disabled if you are aiming at
+// absolutely minimal version of the library.
+//
+// Requires: wxUSE_LONGLONG
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_DATETIME 1
+
+// Set wxUSE_TIMER to 1 to compile wxTimer class
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_TIMER 1
+
+// Use wxStopWatch clas.
+//
+// Default is 1
+//
+// Recommended setting: 1 (needed by wxSocket)
+#define wxUSE_STOPWATCH 1
+
+// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
+// which allow the application to store its settings in the persistent
+// storage. Setting this to 1 will also enable on-demand creation of the
+// global config object in wxApp.
+//
+// See also wxUSE_CONFIG_NATIVE below.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG 1
+
+// If wxUSE_CONFIG is 1, you may choose to use either the native config
+// classes under Windows (using .INI files under Win16 and the registry under
+// Win32) or the portable text file format used by the config classes under
+// Unix.
+//
+// Default is 1 to use native classes. Note that you may still use
+// wxFileConfig even if you set this to 1 - just the config object created by
+// default for the applications needs will be a wxRegConfig or wxIniConfig and
+// not wxFileConfig.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG_NATIVE 1
+
+// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
+// to connect/disconnect from the network and be notified whenever the dial-up
+// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DIALUP_MANAGER 1
+
+// Compile in classes for run-time DLL loading and function calling.
+// Required by wxUSE_DIALUP_MANAGER.
+//
+// This setting is for Win32 only
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DYNLIB_CLASS 1
+
+// experimental, don't use for now
+#define wxUSE_DYNAMIC_LOADER 1
+
+// Set to 1 to use socket classes
+#define wxUSE_SOCKETS 1
+
+// Set to 1 to enable virtual file systems (required by wxHTML)
+#define wxUSE_FILESYSTEM 1
+
+// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_ZIP 1
+
+// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_INET 1
+
+// wxArchive classes for accessing archives such as zip and tar
+#define wxUSE_ARCHIVE_STREAMS 1
+
+// Set to 1 to compile wxZipInput/OutputStream classes.
+#define wxUSE_ZIPSTREAM 1
+
+// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
+// wxUSE_LIBPNG
+#define wxUSE_ZLIB 1
+
+// If enabled, the code written by Apple will be used to write, in a portable
+// way, float on the disk. See extended.c for the license which is different
+// from wxWidgets one.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you don't like the license terms (unlikely)
+#define wxUSE_APPLE_IEEE 1
+
+// Joystick support class
+#define wxUSE_JOYSTICK 1
+
+// wxFontMapper class
+#define wxUSE_FONTMAP 1
+
+// wxMimeTypesManager class
+#define wxUSE_MIMETYPE 1
+
+// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
+// or wxURL you need to set this to 1.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_PROTOCOL 1
+
+// The settings for the individual URL schemes
+#define wxUSE_PROTOCOL_FILE 1
+#define wxUSE_PROTOCOL_FTP 1
+#define wxUSE_PROTOCOL_HTTP 1
+
+// Define this to use wxURL class.
+#define wxUSE_URL 1
+
+// Define this to use native platform url and protocol support.
+// Currently valid only for MS-Windows.
+// Note: if you set this to 1, you can open ftp/http/gopher sites
+// and obtain a valid input stream for these sites
+// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
+// Doing so reduces the code size.
+//
+// This code is experimental and subject to change.
+#define wxUSE_URL_NATIVE 0
+
+// Support for regular expression matching via wxRegEx class: enable this to
+// use POSIX regular expressions in your code. You need to compile regex
+// library from src/regex to use it under Windows.
+//
+// Default is 0
+//
+// Recommended setting: 1 if your compiler supports it, if it doesn't please
+// contribute us a makefile for src/regex for it
+#define wxUSE_REGEX 1
+
+// wxSystemOptions class
+#define wxUSE_SYSTEM_OPTIONS 1
+
+// wxSound class
+#define wxUSE_SOUND 1
+
+// Use wxMediaCtrl
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_MEDIACTRL 1
+
+// Use GStreamer for Unix (req a lot of dependancies)
+//
+// Default is 0
+//
+// Recommended setting: 1 (wxMediaCtrl won't work by default without it)
+#define wxUSE_GSTREAMER 0
+
+// Use wxWidget's XRC XML-based resource system. Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC 1
+
+// XML parsing classes. Note that their API will change in the future, so
+// using wxXmlDocument and wxXmlNode in your app is not recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (required by XRC)
+#if wxUSE_XRC
+# define wxUSE_XML 1
+#else
+# define wxUSE_XML 0
+#endif
-// Set to 1 for MS Icons and Cursors format support
-#define wxUSE_ICO_CUR 1
-
-/*
- * Use iODBC
- */
-#define wxUSE_ODBC 0
-#define wxODBC_FWD_ONLY_CURSORS 1
-/*
- * Use Threads
- */
-#define wxUSE_THREADS 0
-/*
- * Have glibc2
- */
-#define wxHAVE_GLIBC2 1
-/*
- * Use libXpm
- */
-#define wxHAVE_LIB_XPM 0
-
-#define wxUSE_XPM 1
-
-/* ------------------------------------------------------------------------ */
-/* GUI control options (always enabled in wxGTK) */
-/* ------------------------------------------------------------------------ */
-/*
- * Use gauge item
- */
-#define wxUSE_GAUGE 1
-/*
- * Use combobox item
- */
-#define wxUSE_COMBOBOX 1
-/*
- * Use scrollbar item
- */
-#define wxUSE_SCROLLBAR 1
-/*
- * Use scrollbar item
- */
-#define wxUSE_RADIOBTN 1
-/*
- * Use toolbar item
- */
+// ----------------------------------------------------------------------------
+// Individual GUI controls
+// ----------------------------------------------------------------------------
+
+// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
+// (without it, wxControl class is not compiled)
+//
+// Default is 1
+//
+// Recommended setting: 1 (don't change except for very special programs)
+#define wxUSE_CONTROLS 1
+
+// wxPopupWindow class is a top level transient window. It is currently used
+// to implement wxTipWindow
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
+#define wxUSE_POPUPWIN 1
+
+// wxTipWindow allows to implement the custom tooltips, it is used by the
+// context help classes. Requires wxUSE_POPUPWIN.
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0)
+#define wxUSE_TIPWINDOW 1
+
+// Each of the settings below corresponds to one wxWidgets control. They are
+// all switched on by default but may be disabled if you are sure that your
+// program (including any standard dialogs it can show!) doesn't need them and
+// if you desperately want to save some space. If you use any of these you must
+// set wxUSE_CONTROLS as well.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_BUTTON 1 // wxButton
+#define wxUSE_BMPBUTTON 1 // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
+#define wxUSE_CHECKBOX 1 // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHOICE 1 // wxChoice
+#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
+#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
+#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_LISTBOX 1 // wxListBox
+#define wxUSE_LISTCTRL 1 // wxListCtrl
+#define wxUSE_RADIOBOX 1 // wxRadioBox
+#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_SCROLLBAR 1 // wxScrollBar
+#define wxUSE_SLIDER 1 // wxSlider
+#define wxUSE_SPINBTN 1 // wxSpinButton
+#define wxUSE_SPINCTRL 1 // wxSpinCtrl
+#define wxUSE_STATBOX 1 // wxStaticBox
+#define wxUSE_STATLINE 1 // wxStaticLine
+#define wxUSE_STATTEXT 1 // wxStaticText
+#define wxUSE_STATBMP 1 // wxStaticBitmap
+#define wxUSE_TEXTCTRL 1 // wxTextCtrl
+#define wxUSE_TOGGLEBTN 1 // requires wxButton
+#define wxUSE_TREECTRL 1 // wxTreeCtrl
+
+// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
+// below either wxStatusBar95 or a generic wxStatusBar will be used.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_STATUSBAR 1
+
+// Two status bar implementations are available under Win32: the generic one
+// or the wrapper around native control. For native look and feel the native
+// version should be used.
+//
+// Default is 1 for the platforms where native status bar is supported.
+//
+// Recommended setting: 1 (there is no advantage in using the generic one)
+#define wxUSE_NATIVE_STATUSBAR 1
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
#define wxUSE_TOOLBAR 1
-
-/* ------------------------------------------------------------------------ */
-/* non-GUI options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Use time and date classes
- */
-#define wxUSE_TIMEDATE 1
-/*
- * Use config system
- */
-#define wxUSE_CONFIG 1
-/*
- * Use intl system
- */
-#define wxUSE_INTL 1
-/*
- * Use streams
- */
-#define wxUSE_STREAMS 1
-/*
- * Use class serialization
- */
-#define wxUSE_SERIAL 0
-/*
- * Use sockets
- */
-#define wxUSE_SOCKETS 1
-/*
- * Use standard C++ streams if 1. If 0, use wxWin
- * streams implementation.
- */
-#define wxUSE_STD_IOSTREAM 1
-/*
- * Use constraints mechanism
- */
-#define wxUSE_CONSTRAINTS 1
-
-/* ------------------------------------------------------------------------ */
-/* PS options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Use font metric files in GetTextExtent for wxPostScriptDC
- * Use consistent PostScript fonts for AFM and printing (!)
- */
-#define wxUSE_AFM_FOR_POSTSCRIPT 1
-#define WX_NORMALIZED_PS_FONTS 1
-/*
- * Use PostScript device context
- */
-#define wxUSE_POSTSCRIPT 1
-
-/* ------------------------------------------------------------------------ */
-/* wxString options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Compile wxString with wide character (Unicode) support?
- */
-#define wxUSE_UNICODE 1
-
-/*
- * Work around a bug in GNU libc 5.x wcstombs() implementation.
- *
- * Note that you must link your programs with libc.a if you enable this and you
- * have libc 5 (you should enable this for libc6 where wcsrtombs() is
- * thread-safe version of wcstombs()).
- */
-#define wxUSE_WCSRTOMBS 0
-
-/*
- * On some platforms overloading on size_t/int doesn't work, yet we'd like
- * to define both size_t and int version of wxString::operator[] because it
- * should really be size_t, but a lot of old, broken code uses int indices.
- */
-#define wxUSE_SIZE_T_STRING_OPERATOR 1
-
-/* ------------------------------------------------------------------------ */
-/* misc options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Use Interprocess communication
- */
-#define wxUSE_IPC 1
-/*
- * Use wxGetResource & wxWriteResource (change .Xdefaults)
- */
-#define wxUSE_RESOURCES 1
-/*
- * Use clipboard
- */
-#define wxUSE_CLIPBOARD 1
-/*
- * Use tooltips
- */
-#define wxUSE_TOOLTIPS 0
-/*
- * Use dnd
- */
-#define wxUSE_DRAG_AND_DROP 0
-/*
- * Use wxLibrary class
- */
-#define wxUSE_DYNLIB_CLASS 0
-
-/* ------------------------------------------------------------------------ */
-/* architecture options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Use the mdi architecture
- */
-#define wxUSE_MDI_ARCHITECTURE 1
-/*
- * Use the document/view architecture
- */
+#define wxUSE_TOOLBAR_NATIVE 1
+
+// wxNotebook is a control with several "tabs" located on one of its sides. It
+// may be used to logically organise the data presented to the user instead of
+// putting everything in one huge dialog. It replaces wxTabControl and related
+// classes of wxWin 1.6x.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTEBOOK 1
+
+// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_LISTBOOK 1
+
+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+
+// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TREEBOOK 1
+
+// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
+// tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLBOOK 1
+
+// wxTabDialog is a generic version of wxNotebook but it is incompatible with
+// the new class. It shouldn't be used in new code.
+//
+// Default is 0.
+//
+// Recommended setting: 0 (use wxNotebook)
+#define wxUSE_TAB_DIALOG 0
+
+// wxGrid class
+//
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
+//
+// Recommended setting: 1
+//
+#define wxUSE_GRID 1
+
+// wxMiniFrame class: a frame with narrow title bar
+//
+// Default is 1.
+//
+// Recommended setting: 1 (it doesn't cost almost anything)
+#define wxUSE_MINIFRAME 1
+
+// ----------------------------------------------------------------------------
+// Miscellaneous GUI stuff
+// ----------------------------------------------------------------------------
+
+// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
+#define wxUSE_ACCEL 1
+
+// Hotkey support (currently Windows only)
+#define wxUSE_HOTKEY 1
+
+// Use wxCaret: a class implementing a "cursor" in a text control (called caret
+// under Windows).
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can be safely set to 0, not used by the library)
+#define wxUSE_CARET 1
+
+// Use wxDisplay class: it allows enumerating all displays on a system and
+// their geometries as well as finding the display on which the given point or
+// window lies.
+//
+// Default is 1.
+//
+// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
+#define wxUSE_DISPLAY 1
+
+// Miscellaneous geometry code: needed for Canvas library
+#define wxUSE_GEOMETRY 1
+
+// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
+// wxListCtrl.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (set it to 0 if you don't use any of the controls
+// enumerated above, then this class is mostly useless too)
+#define wxUSE_IMAGLIST 1
+
+// Use wxMenu, wxMenuBar, wxMenuItem.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can't be disabled under MSW)
+#define wxUSE_MENUS 1
+
+// Use wxSashWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SASH 1
+
+// Use wxSplitterWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SPLITTER 1
+
+// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLTIPS 1
+
+// wxValidator class and related methods
+#define wxUSE_VALIDATORS 1
+
+// ----------------------------------------------------------------------------
+// common dialogs
+// ----------------------------------------------------------------------------
+
+// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
+// file selector, printer dialog). Switching this off also switches off the
+// printing architecture and interactive wxPrinterDC.
+//
+// Default is 1
+//
+// Recommended setting: 1 (unless it really doesn't work)
+#define wxUSE_COMMON_DIALOGS 1
+
+// wxBusyInfo displays window with message when app is busy. Works in same way
+// as wxBusyCursor
+#define wxUSE_BUSYINFO 1
+
+// Use single/multiple choice dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_CHOICEDLG 1
+
+// Use colour picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_COLOURDLG 1
+
+// wxDirDlg class for getting a directory name from user
+#define wxUSE_DIRDLG 1
+
+// TODO: setting to choose the generic or native one
+
+// Use file open/save dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in many places in the library itself)
+#define wxUSE_FILEDLG 1
+
+// Use find/replace dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (but may be safely set to 0)
+#define wxUSE_FINDREPLDLG 1
+
+// Use font picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_FONTDLG 1
+
+// Use wxMessageDialog and wxMessageBox.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_MSGDLG 1
+
+// progress dialog class for lengthy operations
+#define wxUSE_PROGRESSDLG 1
+
+// support for startup tips (wxShowTip &c)
+#define wxUSE_STARTUP_TIPS 1
+
+// text entry dialog and wxGetTextFromUser function
+#define wxUSE_TEXTDLG 1
+
+// number entry dialog
+#define wxUSE_NUMBERDLG 1
+
+// splash screen class
+#define wxUSE_SPLASH 1
+
+// wizards
+#define wxUSE_WIZARDDLG 1
+
+// ----------------------------------------------------------------------------
+// Metafiles support
+// ----------------------------------------------------------------------------
+
+// Windows supports the graphics format known as metafile which is, though not
+// portable, is widely used under Windows and so is supported by wxWin (under
+// Windows only, of course). Win16 (Win3.1) used the so-called "Window
+// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
+// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
+// default, WMFs will be used under Win16 and EMFs under Win32. This may be
+// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
+// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
+// in any metafile related classes at all.
+//
+// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
+//
+// Recommended setting: default or 0 for everything for portable programs.
+#define wxUSE_METAFILE 1
+#define wxUSE_ENH_METAFILE 1
+#define wxUSE_WIN_METAFILES_ALWAYS 0
+
+// ----------------------------------------------------------------------------
+// Big GUI components
+// ----------------------------------------------------------------------------
+
+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 1
+
+// Set to 0 to disable document/view architecture
#define wxUSE_DOC_VIEW_ARCHITECTURE 1
-/*
- * Use the print/preview architecture
- */
-#define wxUSE_PRINTING_ARCHITECTURE 1
-
-/* ------------------------------------------------------------------------ */
-/* Prolog and wxWindows' resource system options */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Use Prolog IO
- */
-#define wxUSE_PROLOGIO 1
-/*
- * Use Remote Procedure Call (Needs wxUSE_IPC and wxUSE_PROLOGIO)
- */
-#define wxUSE_RPC 0
-/*
- * Use wxWindows resource loading (.wxr-files) (Needs wxUSE_PROLOGIO 1)
- */
-#define wxUSE_WX_RESOURCES 1
-
-/* ------------------------------------------------------------------------ */
-/* the rest */
-/* ------------------------------------------------------------------------ */
-
-/*
- * Use wxWindows help facility (needs wxUSE_IPC 1)
- */
-#define wxUSE_HELP 1
-/*
- * Use iostream.h rather than iostream
- */
-#define wxUSE_IOSTREAMH 1
-/*
- * Use Apple Ieee-double converter
- */
-#define wxUSE_APPLE_IEEE 1
-/* Compatibility with 1.66 API.
- Level 0: no backward compatibility, all new features
- Level 1: wxDC, OnSize (etc.) compatibility, but
- some new features such as event tables */
-#define WXWIN_COMPATIBILITY 0
-/*
- * Enables debugging: memory tracing, assert, etc., contains debug level
- */
-#define WXDEBUG 1
-/*
- * Enables debugging version of wxObject::new and wxObject::delete (IF WXDEBUG)
- * WARNING: this code may not work with all architectures, especially
- * if alignment is an issue.
- */
-#define wxUSE_MEMORY_TRACING 0
-/*
- * Enable debugging version of global memory operators new and delete
- * Disable it, If this causes problems (e.g. link errors)
- */
-#define wxUSE_DEBUG_NEW_ALWAYS 1
-/*
- * In debug mode, causes new to be defined to
- * be WXDEBUG_NEW (see object.h). If this causes
- * problems (e.g. link errors), set this to 0.
- */
-#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-/*
- * Matthews garbage collection (used for MrEd?)
- */
-#define WXGARBAGE_COLLECTION_ON 0
-/*
- * Use splines
- */
-#define wxUSE_SPLINES 1
-/*
- * wxUSE_DYNAMIC_CLASSES is TRUE for the Xt port
- */
-#define wxUSE_DYNAMIC_CLASSES 1
-/*
- * Disable this if your compiler can't cope
- * with omission of prototype parameters.
- */
-#define REMOVE_UNUSED_ARG 1
-/*
- * The const keyword is being introduced more in wxWindows.
- * You can use this setting to maintain backward compatibility.
- * If 0: will use const wherever possible.
- * If 1: will use const only where necessary
- * for precompiled headers to work.
- * If 2: will be totally backward compatible, but precompiled
- * headers may not work and program size will be larger.
- */
-#define CONST_COMPATIBILITY 0
-
-/* ------------------------------------------------------------------------ */
-/* System-specific stuff */
-/* ------------------------------------------------------------------------ */
-
-/* acconfig.h
- This file is in the public domain.
-
- Descriptive text for the C preprocessor macros that
- the distributed Autoconf macros can define.
- No software package will use all of them; autoheader copies the ones
- your configure.in uses into your configuration header file templates.
-
- The entries are in sort -df order: alphabetical, case insensitive,
- ignoring punctuation (such as underscores). Although this order
- can split up related entries, it makes it easier to check whether
- a given entry is in the file. */
-
-/* Define if on AIX 3.
- System headers sometimes define this.
- We just want to avoid a redefinition error message. */
-#ifndef _ALL_SOURCE
-/* #undef _ALL_SOURCE */
-#endif
-
-/* Define if using alloca.c. */
-/* #undef C_ALLOCA */
-
-/* Define if type char is unsigned and you are not using gcc. */
-#ifndef __CHAR_UNSIGNED__
-/* #undef __CHAR_UNSIGNED__ */
-#endif
-
-/* Define if the closedir function returns void instead of int. */
-/* #undef CLOSEDIR_VOID */
-
-/* Define to empty if the keyword does not work. */
-/* #undef const */
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
- This function is required for alloca.c support on those systems. */
-/* #undef CRAY_STACKSEG_END */
-
-/* Define for DGUX with <sys/dg_sys_info.h>. */
-/* #undef DGUX */
-
-/* Define if you have <dirent.h>. */
-/* #undef DIRENT */
-
-/* Define to the type of elements in the array set by `getgroups'.
- Usually this is either `int' or `gid_t'. */
-#define GETGROUPS_T gid_t
-
-/* The type of 3rd argument to getsockname() - usually size_t or int */
-#define SOCKLEN_T size_t
-
-/* Define if the `getloadavg' function needs to be run setuid or setgid. */
-/* #undef GETLOADAVG_PRIVILEGED */
-
-/* Define if the `getpgrp' function takes no argument. */
-/* #undef GETPGRP_VOID */
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-/* #undef gid_t */
-
-/* Define if you have alloca, as a function or macro. */
-/* #undef HAVE_ALLOCA */
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
-/* #undef HAVE_ALLOCA_H */
-
-/* Define if you don't have vprintf but do have _doprnt. */
-/* #undef HAVE_DOPRNT */
-
-/* Define if you have sched.h */
-#define HAVE_SCHED_H 0
-
-/* Define if you have strings.h */
-#define HAVE_STRINGS_H 1
-
-/* Define if you have vprintf() */
-#define HAVE_VPRINTF 1
-
-/* Define if you have dlopen() */
-/* #undef HAVE_DLOPEN */
-
-/* Define if you have shl_load() */
-/* #undef HAVE_SHL_LOAD */
-
-/* Define if you have vsnprintf() */
-#define HAVE_VSNPRINTF 1
-
-/* Define if you have usleep() */
-#define HAVE_USLEEP 1
-
-/* Define if you have nanosleep() */
-#define HAVE_NANOSLEEP 0
-
-/* Define if you have vfork() */
-#define HAVE_VFORK 1
-
-/* Define if you have uname() */
-#define HAVE_UNAME 1
-
-/* Define if you have gethostname() */
-/* #undef HAVE_GETHOSTNAME */
-
-/* Define if you have sched_yield */
-#define HAVE_SCHED_YIELD 1
-
-/* Define if you have pthread_cancel */
-#define HAVE_PTHREAD_CANCEL 1
-
-/* Define if you have all functions to set thread priority */
-#define HAVE_THREAD_PRIORITY_FUNCTIONS 1
-
-/* Define if your system has its own `getloadavg' function. */
-/* #undef HAVE_GETLOADAVG */
-
-/* Define if you have the getmntent function. */
-/* #undef HAVE_GETMNTENT */
-
-/* Define if the `long double' type works. */
-#define HAVE_LONG_DOUBLE 1
-
-/* Define if you support file names longer than 14 characters. */
-#define HAVE_LONG_FILE_NAMES 1
-/* Define if you have a working `mmap' system call. */
-/* #undef HAVE_MMAP */
-
-/* Define if system calls automatically restart after interruption
- by a signal. */
-/* #undef HAVE_RESTARTABLE_SYSCALLS */
-
-/* Define if your struct stat has st_blksize. */
-#define HAVE_ST_BLKSIZE 1
-
-/* Define if your struct stat has st_blocks. */
-#define HAVE_ST_BLOCKS 1
-
-/* Define if you have the strcoll function and it is properly defined. */
-/* #undef HAVE_STRCOLL */
-
-/* Define if your struct stat has st_rdev. */
-#define HAVE_ST_RDEV 1
-
-/* Define if you have the strftime function. */
-/* #undef HAVE_STRFTIME */
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
-#define HAVE_SYS_WAIT_H 1
-
-/* Define if your struct tm has tm_zone. */
-#define HAVE_TM_ZONE 1
+// Set to 0 to disable MDI document/view architecture
+//
+// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
+#define wxUSE_MDI_ARCHITECTURE 1
+
+// Set to 0 to disable print/preview architecture code
+#define wxUSE_PRINTING_ARCHITECTURE 1
+
+// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
+// much more.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
+// smaller library.
+#define wxUSE_HTML 1
+
+// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
+// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
+// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
+// will need to manually add opengl32.lib and glu32.lib to the list of
+// libraries linked with your program if you use OpenGL.
+//
+// Default is 0.
+//
+// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
+#define wxUSE_GLCANVAS 0
+
+// wxRichTextCtrl allows editing of styled text.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 if you want compile a
+// smaller library.
+#define wxUSE_RICHTEXT 1
+
+// ----------------------------------------------------------------------------
+// Data transfer
+// ----------------------------------------------------------------------------
+
+// Use wxClipboard class for clipboard copy/paste.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CLIPBOARD 1
+
+// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
+// drop
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DATAOBJ 1
+
+// Use wxDropTarget and wxDropSource classes for drag and drop (this is
+// different from "built in" drag and drop in wxTreeCtrl which is always
+// available). Requires wxUSE_DATAOBJ.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DRAG_AND_DROP 1
+
+// Use wxAccessible for enhanced and customisable accessibility.
+// Depends on wxUSE_OLE.
+//
+// Default is 0.
+//
+// Recommended setting (at present): 0
+#define wxUSE_ACCESSIBILITY 0
+
+// ----------------------------------------------------------------------------
+// miscellaneous settings
+// ----------------------------------------------------------------------------
+
+// wxSingleInstanceChecker class allows to verify at startup if another program
+// instance is running (it is only available under Win32)
+//
+// Default is 1
+//
+// Recommended setting: 1 (the class is tiny, disabling it won't save much
+// space)
+#define wxUSE_SNGLINST_CHECKER 1
+
+#define wxUSE_DRAGIMAGE 1
+
+#define wxUSE_IPC 1
+ // 0 for no interprocess comms
+#define wxUSE_HELP 1
+ // 0 for no help facility
+#define wxUSE_MS_HTML_HELP 1
+ // 0 for no MS HTML Help
+
+// Use wxHTML-based help controller?
+#define wxUSE_WXHTML_HELP 1
+
+#define wxUSE_RESOURCES 0
+ // 0 for no wxGetResource/wxWriteResource
+#define wxUSE_CONSTRAINTS 1
+ // 0 for no window layout constraint system
-/* Define if you don't have tm_zone but do have the external array
- tzname. */
-/* #undef HAVE_TZNAME */
+#define wxUSE_SPLINES 1
+ // 0 for no splines
-/* Define if you have <unistd.h>. */
-#define HAVE_UNISTD_H 1
+#define wxUSE_MOUSEWHEEL 1
+ // Include mouse wheel support
-/* Define if you have <fnmatch.h>. */
-#define HAVE_FNMATCH_H 1
+// ----------------------------------------------------------------------------
+// postscript support settings
+// ----------------------------------------------------------------------------
-/* Define if utime(file, NULL) sets file's timestamp to the present. */
-/* #undef HAVE_UTIME_NULL */
+// Set to 1 for PostScript device context.
+#define wxUSE_POSTSCRIPT 0
-/* Define if you have <vfork.h>. */
-/* #undef HAVE_VFORK_H */
+// Set to 1 to use font metric files in GetTextExtent
+#define wxUSE_AFM_FOR_POSTSCRIPT 1
-/* Define if you have the vprintf function. */
-#define HAVE_VPRINTF 1
+// ----------------------------------------------------------------------------
+// database classes
+// ----------------------------------------------------------------------------
+
+// Define 1 to use ODBC classes
+#define wxUSE_ODBC 0
+
+// For backward compatibility reasons, this parameter now only controls the
+// default scrolling method used by cursors. This default behavior can be
+// overriden by setting the second param of wxDB::wxDbGetConnection() or
+// wxDb() constructor to indicate whether the connection (and any wxDbTable()s
+// that use the connection) should support forward only scrolling of cursors,
+// or both forward and backward support for backward scrolling cursors is
+// dependent on the data source as well as the ODBC driver being used.
+#define wxODBC_FWD_ONLY_CURSORS 1
+
+// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
+// member variables. With a setting of 1, full backward compatibility with the
+// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
+// as future development will be done only on the non-deprecated
+// functions/classes/member variables/etc.
+#define wxODBC_BACKWARD_COMPATABILITY 0
+
+// ----------------------------------------------------------------------------
+// other compiler (mis)features
+// ----------------------------------------------------------------------------
+
+// Set this to 0 if your compiler can't cope with omission of prototype
+// parameters.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (should never need to set this to 0)
+#define REMOVE_UNUSED_ARG 1
+
+// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
+// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
+// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
+// used anyhow.
+//
+// Default is 1.
+//
+// Recommended setting: whatever your compiler likes more
+#define wxUSE_IOSTREAMH 1
+
+// ----------------------------------------------------------------------------
+// image format support
+// ----------------------------------------------------------------------------
+
+// wxImage supports many different image formats which can be configured at
+// compile-time. BMP is always supported, others are optional and can be safely
+// disabled if you don't plan to use images in such format sometimes saving
+// substantial amount of code in the final library.
+//
+// Some formats require an extra library which is included in wxWin sources
+// which is mentioned if it is the case.
+
+// Set to 1 for wxImage support (recommended).
+#define wxUSE_IMAGE 1
+
+// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
+#define wxUSE_LIBPNG 1
+
+// Set to 1 for JPEG format support (requires libjpeg)
+#define wxUSE_LIBJPEG 1
+
+// Set to 1 for TIFF format support (requires libtiff)
+#define wxUSE_LIBTIFF 1
+
+// Set to 1 for GIF format support
+#define wxUSE_GIF 1
+
+// Set to 1 for PNM format support
+#define wxUSE_PNM 1
+
+// Set to 1 for PCX format support
+#define wxUSE_PCX 1
+
+// Set to 1 for IFF format support (Amiga format)
+#define wxUSE_IFF 0
+
+// Set to 1 for XPM format support
+#define wxUSE_XPM 1
-/* Define if you have the wait3 system call. */
-/* #undef HAVE_WAIT3 */
+// Set to 1 for MS Icons and Cursors format support
+#define wxUSE_ICO_CUR 1
-/* Define as __inline if that's what the C compiler calls it. */
-#ifndef __cplusplus
-/* #undef inline */
+// Set to 1 to compile in wxPalette class
+#define wxUSE_PALETTE 1
+
+/* --- end common options --- */
+
+// ----------------------------------------------------------------------------
+// Windows-only settings
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode
+// and want to run your programs under Windows 9x and not only NT/2000/XP.
+// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
+// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
+// that you will have to modify the makefiles to include unicows.lib import
+// library as the first library (see installation instructions in install.txt
+// to learn how to do it when building the library or samples).
+//
+// If your compiler doesn't have unicows.lib, you can get a version of it at
+// http://libunicows.sourceforge.net
+//
+// Default is 0
+//
+// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
+#ifndef wxUSE_UNICODE_MSLU
+ #define wxUSE_UNICODE_MSLU 0
#endif
-/* Define if major, minor, and makedev are declared in <mkdev.h>. */
-/* #undef MAJOR_IN_MKDEV */
-
-/* Define if major, minor, and makedev are declared in <sysmacros.h>. */
-/* #undef MAJOR_IN_SYSMACROS */
-
-/* Define if on MINIX. */
-/* #undef _MINIX */
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-/* #undef mode_t */
-
-/* Define if you don't have <dirent.h>, but have <ndir.h>. */
-/* #undef NDIR */
-
-/* Define if you have <memory.h>, and <string.h> doesn't declare the
- mem* functions. */
-/* #undef NEED_MEMORY_H */
-
-/* Define if your struct nlist has an n_un member. */
-/* #undef NLIST_NAME_UNION */
-
-/* Define if you have <nlist.h>. */
-/* #undef NLIST_STRUCT */
-
-/* Define if your C compiler doesn't accept -c and -o together. */
-/* #undef NO_MINUS_C_MINUS_O */
-
-/* Define to `long' if <sys/types.h> doesn't define. */
-/* #undef off_t */
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-/* #undef pid_t */
-
-/* Define if the system does not provide POSIX.1 features except
- with this defined. */
-/* #undef _POSIX_1_SOURCE */
-
-/* Define if you need to in order for stat and other things to work. */
-/* #undef _POSIX_SOURCE */
-
-/* Define as the return type of signal handlers (int or void). */
-#define RETSIGTYPE void
-
-/* Define if the setvbuf function takes the buffering type as its second
- argument and the buffer pointer as the third, as on System V
- before release 3. */
-/* #undef SETVBUF_REVERSED */
-
-/* Define SIZESOF for some Objects */
-#define SIZEOF_INT 4
-#define SIZEOF_INT_P 4
-#define SIZEOF_LONG 4
-#define SIZEOF_LONG_LONG 8
-
-/* Define to `unsigned' if <sys/types.h> doesn't define. */
-/* #undef size_t */
-
-/* If using the C implementation of alloca, define if you know the
- direction of stack growth for your system; otherwise it will be
- automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown
- */
-/* #undef STACK_DIRECTION */
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly. */
-/* #undef STAT_MACROS_BROKEN */
-
-/* Define if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define on System V Release 4. */
-/* #undef SVR4 */
-
-/* Define on BSD */
-/* #undef BSD */
-
-/* Define on System V */
-/* #undef SYSV */
-
-/* Define if you don't have <dirent.h>, but have <sys/dir.h>. */
-/* #undef SYSDIR */
-
-/* Define if you don't have <dirent.h>, but have <sys/ndir.h>. */
-/* #undef SYSNDIR */
-
-/* Define if `sys_siglist' is declared by <signal.h>. */
-/* #undef SYS_SIGLIST_DECLARED */
-
-/* Define if you can safely include both <sys/time.h> and <time.h>. */
-#define TIME_WITH_SYS_TIME 1
-
-/* Define if your <sys/time.h> declares struct tm. */
-/* #undef TM_IN_SYS_TIME */
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-/* #undef uid_t */
-
-/* Define for Encore UMAX. */
-/* #undef UMAX */
-
-/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
- instead of <sys/cpustats.h>. */
-/* #undef UMAX4_3 */
-
-/* Define if you do not have <strings.h>, index, bzero, etc.. */
-/* #undef USG */
-
-/* Define if the system is System V Release 4 */
-/* #undef SVR4 */
-
-/* Define vfork as fork if vfork does not work. */
-/* #undef vfork */
-
-/* Define if the closedir function returns void instead of int. */
-/* #undef VOID_CLOSEDIR */
-
-/* Define if your processor stores words with the most significant
- byte first (like Motorola and SPARC, unlike Intel and VAX). */
-/* #undef WORDS_BIGENDIAN */
-
-/* Define if lex declares yytext as a char * by default, not a char[]. */
-#define YYTEXT_POINTER 1
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
+// will override some other settings (see below)
+//
+// Default is 0.
+//
+// Recommended setting: 0 unless you really have to use MFC
+#define wxUSE_MFC 0
+
+// Set this to 1 for generic OLE support: this is required for drag-and-drop,
+// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
+// can't compile/doesn't have the OLE headers.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_OLE 1
+
+// wxDC cacheing implementation
+#define wxUSE_DC_CACHEING 1
+
+// Set this to 1 to enable the use of DIB's for wxBitmap to support
+// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
+#define wxUSE_DIB_FOR_BITMAP 0
+
+// Set this to 1 to enable wxDIB
+#define wxUSE_WXDIB 1
+
+// Set to 0 to disable PostScript print/preview architecture code under Windows
+// (just use Windows printing).
+#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
+
+// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
+// which allows to put more than ~32Kb of text in it even under Win9x (NT
+// doesn't have such limitation).
+//
+// Default is 1 for compilers which support it
+//
+// Recommended setting: 1, only set it to 0 if your compiler doesn't have
+// or can't compile <richedit.h>
+#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
+#define wxUSE_RICHEDIT 1
+
+// TODO: This should be ifdef'ed for any compilers that don't support
+// RichEdit 2.0 but do have RichEdit 1.0...
+#define wxUSE_RICHEDIT2 1
+
+#else
+#define wxUSE_RICHEDIT 0
+#define wxUSE_RICHEDIT2 0
+#endif
-#endif /* __GTKSETUPH__ */
+// Set this to 1 to enable support for the owner-drawn menu and listboxes. This
+// is required by wxUSE_CHECKLISTBOX.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 for a small library size reduction
+#define wxUSE_OWNER_DRAWN 1
+
+// Set to 1 to compile MS Windows XP theme engine support
+#define wxUSE_UXTHEME 1
+
+// Set to 1 to auto-adapt to MS Windows XP themes where possible
+// (notably, wxNotebook pages)
+#define wxUSE_UXTHEME_AUTO 1
+
+// ----------------------------------------------------------------------------
+// Generic versions of native controls
+// ----------------------------------------------------------------------------
+
+// Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the
+// native wxDatePickerCtrl
+//
+// Default is 0.
+//
+// Recommended setting: 0, this is mainly used for testing
+#define wxUSE_DATEPICKCTRL_GENERIC 0
+
+// ----------------------------------------------------------------------------
+// Crash debugging helpers
+// ----------------------------------------------------------------------------
+
+// Set this to 1 to be able to use wxCrashReport::Generate() to create mini
+// dumps of your program when it crashes (or at any other moment)
+//
+// Default is 1 if supported by the compiler (VC++ and recent BC++ only).
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_CRASHREPORT 1
+
+// ----------------------------------------------------------------------------
+// obsolete settings
+// ----------------------------------------------------------------------------
+
+// NB: all settings in this section are obsolete and should not be used/changed
+// at all, they will disappear
+
+// Define 1 to use bitmap messages.
+#define wxUSE_BITMAP_MESSAGE 1
+
+#endif // _WX_SETUP_H_
-\f
-/* Leave that blank line there!! Autoheader needs it.
- If you're adding to this file, keep in mind:
- The entries are in sort -df order: alphabetical, case insensitive,
- ignoring punctuation (such as underscores). */
projects / wxWidgets.git / blobdiff