+ eval "$ac_cv_use_zlib"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_zlib >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ZLIB" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --with-odbc"""... $ac_c" 1>&6
+echo "configure:1793: checking "for --with-odbc"" >&5
+ no_cache=0
+ # Check whether --with-odbc or --without-odbc was given.
+if test "${with_odbc+set}" = set; then
+ withval="$with_odbc"
+
+ if test "$withval" = yes; then
+ ac_cv_use_odbc='wxUSE_ODBC=yes'
+ else
+ ac_cv_use_odbc='wxUSE_ODBC=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ODBC" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_odbc='wxUSE_ODBC='$DEFAULT_wxUSE_ODBC
+
+fi
+
+
+ eval "$ac_cv_use_odbc"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_odbc >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ODBC" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+
+ echo $ac_n "checking "for --enable-shared"""... $ac_c" 1>&6
+echo "configure:1835: checking "for --enable-shared"" >&5
+ no_cache=0
+ # Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_shared='wxUSE_SHARED=yes'
+ else
+ ac_cv_use_shared='wxUSE_SHARED=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SHARED" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_shared='wxUSE_SHARED='$DEFAULT_wxUSE_SHARED
+
+fi
+
+
+ eval "$ac_cv_use_shared"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_shared >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SHARED" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-optimise"""... $ac_c" 1>&6
+echo "configure:1874: checking "for --enable-optimise"" >&5
+ no_cache=0
+ # Check whether --enable-optimise or --disable-optimise was given.
+if test "${enable_optimise+set}" = set; then
+ enableval="$enable_optimise"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_optimise='wxUSE_OPTIMISE=yes'
+ else
+ ac_cv_use_optimise='wxUSE_OPTIMISE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_OPTIMISE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_optimise='wxUSE_OPTIMISE='$DEFAULT_wxUSE_OPTIMISE
+
+fi
+
+
+ eval "$ac_cv_use_optimise"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_optimise >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_OPTIMISE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug"""... $ac_c" 1>&6
+echo "configure:1913: checking "for --enable-debug"" >&5
+ no_cache=0
+ # Check whether --enable-debug or --disable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval="$enable_debug"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug='wxUSE_DEBUG=yes'
+ else
+ ac_cv_use_debug='wxUSE_DEBUG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug='wxUSE_DEBUG='$DEFAULT_wxUSE_DEBUG
+
+fi
+
+
+ eval "$ac_cv_use_debug"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+if test "$wxUSE_DEBUG" = "yes"; then
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=yes
+elif test "$wxUSE_DEBUG" = "no"; then
+ DEFAULT_wxUSE_DEBUG_FLAG=no
+ DEFAULT_wxUSE_DEBUG_INFO=no
+fi
+
+
+ echo $ac_n "checking "for --enable-debug_flag"""... $ac_c" 1>&6
+echo "configure:1961: checking "for --enable-debug_flag"" >&5
+ no_cache=0
+ # Check whether --enable-debug_flag or --disable-debug_flag was given.
+if test "${enable_debug_flag+set}" = set; then
+ enableval="$enable_debug_flag"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG=yes'
+ else
+ ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_FLAG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG='$DEFAULT_wxUSE_DEBUG_FLAG
+
+fi
+
+
+ eval "$ac_cv_use_debug_flag"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_flag >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_FLAG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug_info"""... $ac_c" 1>&6
+echo "configure:2000: checking "for --enable-debug_info"" >&5
+ no_cache=0
+ # Check whether --enable-debug_info or --disable-debug_info was given.
+if test "${enable_debug_info+set}" = set; then
+ enableval="$enable_debug_info"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_info='wxUSE_DEBUG_INFO=yes'
+ else
+ ac_cv_use_debug_info='wxUSE_DEBUG_INFO=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_INFO" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_info='wxUSE_DEBUG_INFO='$DEFAULT_wxUSE_DEBUG_INFO
+
+fi
+
+
+ eval "$ac_cv_use_debug_info"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_info >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_INFO" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug_gdb"""... $ac_c" 1>&6
+echo "configure:2039: checking "for --enable-debug_gdb"" >&5
+ no_cache=0
+ # Check whether --enable-debug_gdb or --disable-debug_gdb was given.
+if test "${enable_debug_gdb+set}" = set; then
+ enableval="$enable_debug_gdb"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB=yes'
+ else
+ ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_GDB" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB='$DEFAULT_wxUSE_DEBUG_GDB
+
+fi
+
+
+ eval "$ac_cv_use_debug_gdb"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_gdb >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_GDB" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug_cntxt"""... $ac_c" 1>&6
+echo "configure:2078: checking "for --enable-debug_cntxt"" >&5
+ no_cache=0
+ # Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
+if test "${enable_debug_cntxt+set}" = set; then
+ enableval="$enable_debug_cntxt"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT=yes'
+ else
+ ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_CONTEXT" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT='$DEFAULT_wxUSE_DEBUG_CONTEXT
+
+fi
+
+
+ eval "$ac_cv_use_debug_cntxt"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_cntxt >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_CONTEXT" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-mem_tracing"""... $ac_c" 1>&6
+echo "configure:2117: checking "for --enable-mem_tracing"" >&5
+ no_cache=0
+ # Check whether --enable-mem_tracing or --disable-mem_tracing was given.
+if test "${enable_mem_tracing+set}" = set; then
+ enableval="$enable_mem_tracing"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_mem_tracing='wxUSE_MEM_TRACING=yes'
+ else
+ ac_cv_use_mem_tracing='wxUSE_MEM_TRACING=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MEM_TRACING" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_mem_tracing='wxUSE_MEM_TRACING='$DEFAULT_wxUSE_MEM_TRACING
+
+fi
+
+
+ eval "$ac_cv_use_mem_tracing"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_mem_tracing >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MEM_TRACING" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-profile"""... $ac_c" 1>&6
+echo "configure:2156: checking "for --enable-profile"" >&5
+ no_cache=0
+ # Check whether --enable-profile or --disable-profile was given.
+if test "${enable_profile+set}" = set; then
+ enableval="$enable_profile"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_profile='wxUSE_PROFILE=yes'
+ else
+ ac_cv_use_profile='wxUSE_PROFILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PROFILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_profile='wxUSE_PROFILE='$DEFAULT_wxUSE_PROFILE
+
+fi
+
+
+ eval "$ac_cv_use_profile"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_profile >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PROFILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-no_rtti"""... $ac_c" 1>&6
+echo "configure:2195: checking "for --enable-no_rtti"" >&5
+ no_cache=0
+ # Check whether --enable-no_rtti or --disable-no_rtti was given.
+if test "${enable_no_rtti+set}" = set; then
+ enableval="$enable_no_rtti"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_no_rtti='wxUSE_NO_RTTI=yes'
+ else
+ ac_cv_use_no_rtti='wxUSE_NO_RTTI=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NO_RTTI" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_no_rtti='wxUSE_NO_RTTI='$DEFAULT_wxUSE_NO_RTTI
+
+fi
+
+
+ eval "$ac_cv_use_no_rtti"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_no_rtti >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NO_RTTI" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-no_exceptions"""... $ac_c" 1>&6
+echo "configure:2234: checking "for --enable-no_exceptions"" >&5
+ no_cache=0
+ # Check whether --enable-no_exceptions or --disable-no_exceptions was given.
+if test "${enable_no_exceptions+set}" = set; then
+ enableval="$enable_no_exceptions"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS=yes'
+ else
+ ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NO_EXCEPTIONS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS='$DEFAULT_wxUSE_NO_EXCEPTIONS
+
+fi
+
+
+ eval "$ac_cv_use_no_exceptions"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_no_exceptions >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NO_EXCEPTIONS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-permissive"""... $ac_c" 1>&6
+echo "configure:2273: checking "for --enable-permissive"" >&5
+ no_cache=0
+ # Check whether --enable-permissive or --disable-permissive was given.
+if test "${enable_permissive+set}" = set; then
+ enableval="$enable_permissive"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_permissive='wxUSE_PERMISSIVE=yes'
+ else
+ ac_cv_use_permissive='wxUSE_PERMISSIVE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PERMISSIVE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_permissive='wxUSE_PERMISSIVE='$DEFAULT_wxUSE_PERMISSIVE
+
+fi
+
+
+ eval "$ac_cv_use_permissive"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_permissive >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PERMISSIVE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-no_deps"""... $ac_c" 1>&6
+echo "configure:2312: checking "for --enable-no_deps"" >&5
+ no_cache=0
+ # Check whether --enable-no_deps or --disable-no_deps was given.
+if test "${enable_no_deps+set}" = set; then
+ enableval="$enable_no_deps"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_no_deps='wxUSE_NO_DEPS=yes'
+ else
+ ac_cv_use_no_deps='wxUSE_NO_DEPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NO_DEPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_no_deps='wxUSE_NO_DEPS='$DEFAULT_wxUSE_NO_DEPS
+
+fi
+
+
+ eval "$ac_cv_use_no_deps"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_no_deps >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NO_DEPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-intl"""... $ac_c" 1>&6
+echo "configure:2353: checking "for --enable-intl"" >&5
+ no_cache=0
+ # Check whether --enable-intl or --disable-intl was given.
+if test "${enable_intl+set}" = set; then
+ enableval="$enable_intl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_intl='wxUSE_INTL=yes'
+ else
+ ac_cv_use_intl='wxUSE_INTL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_INTL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_intl='wxUSE_INTL='$DEFAULT_wxUSE_INTL
+
+fi
+
+
+ eval "$ac_cv_use_intl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_intl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_INTL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-config"""... $ac_c" 1>&6
+echo "configure:2392: checking "for --enable-config"" >&5
+ no_cache=0
+ # Check whether --enable-config or --disable-config was given.
+if test "${enable_config+set}" = set; then
+ enableval="$enable_config"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_config='wxUSE_CONFIG=yes'
+ else
+ ac_cv_use_config='wxUSE_CONFIG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CONFIG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_config='wxUSE_CONFIG='$DEFAULT_wxUSE_CONFIG
+
+fi
+
+
+ eval "$ac_cv_use_config"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_config >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CONFIG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+if test "$wxUSE_GUI" = "yes"; then
+
+ echo $ac_n "checking "for --enable-sockets"""... $ac_c" 1>&6
+echo "configure:2433: checking "for --enable-sockets"" >&5
+ no_cache=0
+ # Check whether --enable-sockets or --disable-sockets was given.
+if test "${enable_sockets+set}" = set; then
+ enableval="$enable_sockets"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_sockets='wxUSE_SOCKETS=yes'
+ else
+ ac_cv_use_sockets='wxUSE_SOCKETS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SOCKETS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_sockets='wxUSE_SOCKETS='$DEFAULT_wxUSE_SOCKETS
+
+fi
+
+
+ eval "$ac_cv_use_sockets"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_sockets >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SOCKETS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+else
+wxUSE_SOCKETS=no
+fi
+
+
+ echo $ac_n "checking "for --enable-dialupman"""... $ac_c" 1>&6
+echo "configure:2476: checking "for --enable-dialupman"" >&5
+ no_cache=0
+ # Check whether --enable-dialupman or --disable-dialupman was given.
+if test "${enable_dialupman+set}" = set; then
+ enableval="$enable_dialupman"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=yes'
+ else
+ ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DIALUP_MANAGER" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER='$DEFAULT_wxUSE_DIALUP_MANAGER
+
+fi
+
+
+ eval "$ac_cv_use_dialupman"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dialupman >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DIALUP_MANAGER" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-ipc"""... $ac_c" 1>&6
+echo "configure:2515: checking "for --enable-ipc"" >&5
+ no_cache=0
+ # Check whether --enable-ipc or --disable-ipc was given.
+if test "${enable_ipc+set}" = set; then
+ enableval="$enable_ipc"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_ipc='wxUSE_IPC=yes'
+ else
+ ac_cv_use_ipc='wxUSE_IPC=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IPC" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_ipc='wxUSE_IPC='$DEFAULT_wxUSE_IPC
+
+fi
+
+
+ eval "$ac_cv_use_ipc"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_ipc >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IPC" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-apple_ieee"""... $ac_c" 1>&6
+echo "configure:2554: checking "for --enable-apple_ieee"" >&5
+ no_cache=0
+ # Check whether --enable-apple_ieee or --disable-apple_ieee was given.
+if test "${enable_apple_ieee+set}" = set; then
+ enableval="$enable_apple_ieee"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=yes'
+ else
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_APPLE_IEEE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE='$DEFAULT_wxUSE_APPLE_IEEE
+
+fi
+
+
+ eval "$ac_cv_use_apple_ieee"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_apple_ieee >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_APPLE_IEEE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-timedate"""... $ac_c" 1>&6
+echo "configure:2593: checking "for --enable-timedate"" >&5
+ no_cache=0
+ # Check whether --enable-timedate or --disable-timedate was given.
+if test "${enable_timedate+set}" = set; then
+ enableval="$enable_timedate"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_timedate='wxUSE_TIMEDATE=yes'
+ else
+ ac_cv_use_timedate='wxUSE_TIMEDATE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TIMEDATE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_timedate='wxUSE_TIMEDATE='$DEFAULT_wxUSE_TIMEDATE
+
+fi
+
+
+ eval "$ac_cv_use_timedate"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_timedate >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TIMEDATE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-wave"""... $ac_c" 1>&6
+echo "configure:2632: checking "for --enable-wave"" >&5
+ no_cache=0
+ # Check whether --enable-wave or --disable-wave was given.
+if test "${enable_wave+set}" = set; then
+ enableval="$enable_wave"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wave='wxUSE_WAVE=yes'
+ else
+ ac_cv_use_wave='wxUSE_WAVE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WAVE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wave='wxUSE_WAVE='$DEFAULT_wxUSE_WAVE
+
+fi
+
+
+ eval "$ac_cv_use_wave"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wave >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WAVE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-fraction"""... $ac_c" 1>&6
+echo "configure:2671: checking "for --enable-fraction"" >&5
+ no_cache=0
+ # Check whether --enable-fraction or --disable-fraction was given.
+if test "${enable_fraction+set}" = set; then
+ enableval="$enable_fraction"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fraction='wxUSE_FRACTION=yes'
+ else
+ ac_cv_use_fraction='wxUSE_FRACTION=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FRACTION" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fraction='wxUSE_FRACTION='$DEFAULT_wxUSE_FRACTION
+
+fi
+
+
+ eval "$ac_cv_use_fraction"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fraction >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FRACTION" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-dynlib"""... $ac_c" 1>&6
+echo "configure:2710: checking "for --enable-dynlib"" >&5
+ no_cache=0
+ # Check whether --enable-dynlib or --disable-dynlib was given.
+if test "${enable_dynlib+set}" = set; then
+ enableval="$enable_dynlib"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=yes'
+ else
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DYNLIB_CLASS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS='$DEFAULT_wxUSE_DYNLIB_CLASS
+
+fi
+
+
+ eval "$ac_cv_use_dynlib"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dynlib >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DYNLIB_CLASS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-longlong"""... $ac_c" 1>&6
+echo "configure:2749: checking "for --enable-longlong"" >&5
+ no_cache=0
+ # Check whether --enable-longlong or --disable-longlong was given.
+if test "${enable_longlong+set}" = set; then
+ enableval="$enable_longlong"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_longlong='wxUSE_LONGLONG=yes'
+ else
+ ac_cv_use_longlong='wxUSE_LONGLONG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LONGLONG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_longlong='wxUSE_LONGLONG='$DEFAULT_wxUSE_LONGLONG
+
+fi
+
+
+ eval "$ac_cv_use_longlong"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_longlong >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LONGLONG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-log"""... $ac_c" 1>&6
+echo "configure:2788: checking "for --enable-log"" >&5
+ no_cache=0
+ # Check whether --enable-log or --disable-log was given.
+if test "${enable_log+set}" = set; then
+ enableval="$enable_log"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_log='wxUSE_LOG=yes'
+ else
+ ac_cv_use_log='wxUSE_LOG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LOG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_log='wxUSE_LOG='$DEFAULT_wxUSE_LOG
+
+fi
+
+
+ eval "$ac_cv_use_log"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_log >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LOG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-streams"""... $ac_c" 1>&6
+echo "configure:2827: checking "for --enable-streams"" >&5
+ no_cache=0
+ # Check whether --enable-streams or --disable-streams was given.
+if test "${enable_streams+set}" = set; then
+ enableval="$enable_streams"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_streams='wxUSE_STREAMS=yes'
+ else
+ ac_cv_use_streams='wxUSE_STREAMS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STREAMS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_streams='wxUSE_STREAMS='$DEFAULT_wxUSE_STREAMS
+
+fi
+
+
+ eval "$ac_cv_use_streams"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_streams >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STREAMS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-file"""... $ac_c" 1>&6
+echo "configure:2866: checking "for --enable-file"" >&5
+ no_cache=0
+ # Check whether --enable-file or --disable-file was given.
+if test "${enable_file+set}" = set; then
+ enableval="$enable_file"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_file='wxUSE_FILE=yes'
+ else
+ ac_cv_use_file='wxUSE_FILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_file='wxUSE_FILE='$DEFAULT_wxUSE_FILE
+
+fi
+
+
+ eval "$ac_cv_use_file"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_file >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-textfile"""... $ac_c" 1>&6
+echo "configure:2905: checking "for --enable-textfile"" >&5
+ no_cache=0
+ # Check whether --enable-textfile or --disable-textfile was given.
+if test "${enable_textfile+set}" = set; then
+ enableval="$enable_textfile"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_textfile='wxUSE_TEXTFILE=yes'
+ else
+ ac_cv_use_textfile='wxUSE_TEXTFILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TEXTFILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_textfile='wxUSE_TEXTFILE='$DEFAULT_wxUSE_TEXTFILE
+
+fi
+
+
+ eval "$ac_cv_use_textfile"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_textfile >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TEXTFILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-unicode"""... $ac_c" 1>&6
+echo "configure:2944: checking "for --enable-unicode"" >&5
+ no_cache=0
+ # Check whether --enable-unicode or --disable-unicode was given.
+if test "${enable_unicode+set}" = set; then
+ enableval="$enable_unicode"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_unicode='wxUSE_UNICODE=yes'
+ else
+ ac_cv_use_unicode='wxUSE_UNICODE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_UNICODE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_unicode='wxUSE_UNICODE='$DEFAULT_wxUSE_UNICODE
+
+fi
+
+
+ eval "$ac_cv_use_unicode"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_unicode >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_UNICODE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-wcsrtombs"""... $ac_c" 1>&6
+echo "configure:2983: checking "for --enable-wcsrtombs"" >&5
+ no_cache=0
+ # Check whether --enable-wcsrtombs or --disable-wcsrtombs was given.
+if test "${enable_wcsrtombs+set}" = set; then
+ enableval="$enable_wcsrtombs"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=yes'
+ else
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WCSRTOMBS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS='$DEFAULT_wxUSE_WCSRTOMBS
+
+fi
+
+
+ eval "$ac_cv_use_wcsrtombs"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wcsrtombs >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WCSRTOMBS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-wxprintfv"""... $ac_c" 1>&6
+echo "configure:3022: checking "for --enable-wxprintfv"" >&5
+ no_cache=0
+ # Check whether --enable-wxprintfv or --disable-wxprintfv was given.
+if test "${enable_wxprintfv+set}" = set; then
+ enableval="$enable_wxprintfv"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=yes'
+ else
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_EXPERIMENTAL_PRINTF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF='$DEFAULT_wxUSE_EXPERIMENTAL_PRINTF
+
+fi
+
+
+ eval "$ac_cv_use_wxprintfv"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wxprintfv >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_EXPERIMENTAL_PRINTF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-joystick"""... $ac_c" 1>&6
+echo "configure:3061: checking "for --enable-joystick"" >&5
+ no_cache=0
+ # Check whether --enable-joystick or --disable-joystick was given.
+if test "${enable_joystick+set}" = set; then
+ enableval="$enable_joystick"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
+ else
+ ac_cv_use_joystick='wxUSE_JOYSTICK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
+
+fi
+
+
+ eval "$ac_cv_use_joystick"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_JOYSTICK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-std_iostreams"""... $ac_c" 1>&6
+echo "configure:3100: checking "for --enable-std_iostreams"" >&5
+ no_cache=0
+ # Check whether --enable-std_iostreams or --disable-std_iostreams was given.
+if test "${enable_std_iostreams+set}" = set; then
+ enableval="$enable_std_iostreams"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=yes'
+ else
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STD_IOSTREAM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM='$DEFAULT_wxUSE_STD_IOSTREAM
+
+fi
+
+
+ eval "$ac_cv_use_std_iostreams"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_std_iostreams >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STD_IOSTREAM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-fs_inet"""... $ac_c" 1>&6
+echo "configure:3139: checking "for --enable-fs_inet"" >&5
+ no_cache=0
+ # Check whether --enable-fs_inet or --disable-fs_inet was given.
+if test "${enable_fs_inet+set}" = set; then
+ enableval="$enable_fs_inet"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fs_inet='wxUSE_FS_INET=yes'
+ else
+ ac_cv_use_fs_inet='wxUSE_FS_INET=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FS_INET" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fs_inet='wxUSE_FS_INET='$DEFAULT_wxUSE_FS_INET
+
+fi
+
+
+ eval "$ac_cv_use_fs_inet"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fs_inet >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FS_INET" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-fs_zip"""... $ac_c" 1>&6
+echo "configure:3178: checking "for --enable-fs_zip"" >&5
+ no_cache=0
+ # Check whether --enable-fs_zip or --disable-fs_zip was given.
+if test "${enable_fs_zip+set}" = set; then
+ enableval="$enable_fs_zip"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP=yes'
+ else
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FS_ZIP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP='$DEFAULT_wxUSE_FS_ZIP
+
+fi
+
+
+ eval "$ac_cv_use_fs_zip"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fs_zip >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FS_ZIP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-zipstream"""... $ac_c" 1>&6
+echo "configure:3217: checking "for --enable-zipstream"" >&5
+ no_cache=0
+ # Check whether --enable-zipstream or --disable-zipstream was given.
+if test "${enable_zipstream+set}" = set; then
+ enableval="$enable_zipstream"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM=yes'
+ else
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ZIPSTREAM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM='$DEFAULT_wxUSE_ZIPSTREAM
+
+fi
+
+
+ eval "$ac_cv_use_zipstream"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_zipstream >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ZIPSTREAM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-threads"""... $ac_c" 1>&6
+echo "configure:3258: checking "for --enable-threads"" >&5
+ no_cache=0
+ # Check whether --enable-threads or --disable-threads was given.
+if test "${enable_threads+set}" = set; then
+ enableval="$enable_threads"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_threads='wxUSE_THREADS=yes'
+ else
+ ac_cv_use_threads='wxUSE_THREADS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_THREADS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_threads='wxUSE_THREADS='$DEFAULT_wxUSE_THREADS
+
+fi
+
+
+ eval "$ac_cv_use_threads"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_threads >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_THREADS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-serial"""... $ac_c" 1>&6
+echo "configure:3297: checking "for --enable-serial"" >&5
+ no_cache=0
+ # Check whether --enable-serial or --disable-serial was given.
+if test "${enable_serial+set}" = set; then
+ enableval="$enable_serial"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_serial='wxUSE_SERIAL=yes'
+ else
+ ac_cv_use_serial='wxUSE_SERIAL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SERIAL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_serial='wxUSE_SERIAL='$DEFAULT_wxUSE_SERIAL
+
+fi
+
+
+ eval "$ac_cv_use_serial"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_serial >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SERIAL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+if test "$wxUSE_GUI" = "yes"; then
+
+
+
+ echo $ac_n "checking "for --enable-docview"""... $ac_c" 1>&6
+echo "configure:3340: checking "for --enable-docview"" >&5
+ no_cache=0
+ # Check whether --enable-docview or --disable-docview was given.
+if test "${enable_docview+set}" = set; then
+ enableval="$enable_docview"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=yes'
+ else
+ ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DOC_VIEW_ARCHITECTURE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE='$DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE
+
+fi
+
+
+ eval "$ac_cv_use_docview"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_docview >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DOC_VIEW_ARCHITECTURE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-help"""... $ac_c" 1>&6
+echo "configure:3379: checking "for --enable-help"" >&5
+ no_cache=0
+ # Check whether --enable-help or --disable-help was given.
+if test "${enable_help+set}" = set; then
+ enableval="$enable_help"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_help='wxUSE_HELP=yes'
+ else
+ ac_cv_use_help='wxUSE_HELP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_HELP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_help='wxUSE_HELP='$DEFAULT_wxUSE_HELP
+
+fi
+
+
+ eval "$ac_cv_use_help"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_help >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_HELP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-constraints"""... $ac_c" 1>&6
+echo "configure:3418: checking "for --enable-constraints"" >&5
+ no_cache=0
+ # Check whether --enable-constraints or --disable-constraints was given.
+if test "${enable_constraints+set}" = set; then
+ enableval="$enable_constraints"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_constraints='wxUSE_CONSTRAINTS=yes'
+ else
+ ac_cv_use_constraints='wxUSE_CONSTRAINTS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CONSTRAINTS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_constraints='wxUSE_CONSTRAINTS='$DEFAULT_wxUSE_CONSTRAINTS
+
+fi
+
+
+ eval "$ac_cv_use_constraints"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_constraints >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CONSTRAINTS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-printarch"""... $ac_c" 1>&6
+echo "configure:3457: checking "for --enable-printarch"" >&5
+ no_cache=0
+ # Check whether --enable-printarch or --disable-printarch was given.
+if test "${enable_printarch+set}" = set; then
+ enableval="$enable_printarch"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=yes'
+ else
+ ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PRINTING_ARCHITECTURE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE='$DEFAULT_wxUSE_PRINTING_ARCHITECTURE
+
+fi
+
+
+ eval "$ac_cv_use_printarch"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_printarch >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PRINTING_ARCHITECTURE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-mdi"""... $ac_c" 1>&6
+echo "configure:3496: checking "for --enable-mdi"" >&5
+ no_cache=0
+ # Check whether --enable-mdi or --disable-mdi was given.
+if test "${enable_mdi+set}" = set; then
+ enableval="$enable_mdi"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=yes'
+ else
+ ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MDI_ARCHITECTURE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE='$DEFAULT_wxUSE_MDI_ARCHITECTURE
+
+fi
+
+
+ eval "$ac_cv_use_mdi"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_mdi >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MDI_ARCHITECTURE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+ echo $ac_n "checking "for --enable-postscript"""... $ac_c" 1>&6
+echo "configure:3536: checking "for --enable-postscript"" >&5
+ no_cache=0
+ # Check whether --enable-postscript or --disable-postscript was given.
+if test "${enable_postscript+set}" = set; then
+ enableval="$enable_postscript"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_postscript='wxUSE_POSTSCRIPT=yes'
+ else
+ ac_cv_use_postscript='wxUSE_POSTSCRIPT=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_POSTSCRIPT" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_postscript='wxUSE_POSTSCRIPT='$DEFAULT_wxUSE_POSTSCRIPT
+
+fi
+
+
+ eval "$ac_cv_use_postscript"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_postscript >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_POSTSCRIPT" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-prologio"""... $ac_c" 1>&6
+echo "configure:3577: checking "for --enable-prologio"" >&5
+ no_cache=0
+ # Check whether --enable-prologio or --disable-prologio was given.
+if test "${enable_prologio+set}" = set; then
+ enableval="$enable_prologio"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_prologio='wxUSE_PROLOGIO=yes'
+ else
+ ac_cv_use_prologio='wxUSE_PROLOGIO=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PROLOGIO" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_prologio='wxUSE_PROLOGIO='$DEFAULT_wxUSE_PROLOGIO
+
+fi
+
+
+ eval "$ac_cv_use_prologio"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_prologio >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PROLOGIO" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-resources"""... $ac_c" 1>&6
+echo "configure:3616: checking "for --enable-resources"" >&5
+ no_cache=0
+ # Check whether --enable-resources or --disable-resources was given.
+if test "${enable_resources+set}" = set; then
+ enableval="$enable_resources"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_resources='wxUSE_RESOURCES=yes'
+ else
+ ac_cv_use_resources='wxUSE_RESOURCES=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_RESOURCES" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_resources='wxUSE_RESOURCES='$DEFAULT_wxUSE_RESOURCES
+
+fi
+
+
+ eval "$ac_cv_use_resources"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_resources >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_RESOURCES" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+ echo $ac_n "checking "for --enable-xresources"""... $ac_c" 1>&6
+echo "configure:3656: checking "for --enable-xresources"" >&5
+ no_cache=0
+ # Check whether --enable-xresources or --disable-xresources was given.
+if test "${enable_xresources+set}" = set; then
+ enableval="$enable_xresources"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_xresources='wxUSE_X_RESOURCES=yes'
+ else
+ ac_cv_use_xresources='wxUSE_X_RESOURCES=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_X_RESOURCES" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_xresources='wxUSE_X_RESOURCES='$DEFAULT_wxUSE_X_RESOURCES
+
+fi
+
+
+ eval "$ac_cv_use_xresources"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_xresources >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_X_RESOURCES" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-clipboard"""... $ac_c" 1>&6
+echo "configure:3697: checking "for --enable-clipboard"" >&5
+ no_cache=0
+ # Check whether --enable-clipboard or --disable-clipboard was given.
+if test "${enable_clipboard+set}" = set; then
+ enableval="$enable_clipboard"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_clipboard='wxUSE_CLIPBOARD=yes'
+ else
+ ac_cv_use_clipboard='wxUSE_CLIPBOARD=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CLIPBOARD" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_clipboard='wxUSE_CLIPBOARD='$DEFAULT_wxUSE_CLIPBOARD
+
+fi
+
+
+ eval "$ac_cv_use_clipboard"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_clipboard >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CLIPBOARD" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-dnd"""... $ac_c" 1>&6
+echo "configure:3736: checking "for --enable-dnd"" >&5
+ no_cache=0
+ # Check whether --enable-dnd or --disable-dnd was given.
+if test "${enable_dnd+set}" = set; then
+ enableval="$enable_dnd"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=yes'
+ else
+ ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DRAG_AND_DROP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dnd='wxUSE_DRAG_AND_DROP='$DEFAULT_wxUSE_DRAG_AND_DROP
+
+fi
+
+
+ eval "$ac_cv_use_dnd"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dnd >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DRAG_AND_DROP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+ echo $ac_n "checking "for --enable-wxtree"""... $ac_c" 1>&6
+echo "configure:3776: checking "for --enable-wxtree"" >&5
+ no_cache=0
+ # Check whether --enable-wxtree or --disable-wxtree was given.
+if test "${enable_wxtree+set}" = set; then
+ enableval="$enable_wxtree"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wxtree='wxUSE_WXTREE=yes'
+ else
+ ac_cv_use_wxtree='wxUSE_WXTREE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WXTREE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wxtree='wxUSE_WXTREE='$DEFAULT_wxUSE_WXTREE
+
+fi
+
+
+ eval "$ac_cv_use_wxtree"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wxtree >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WXTREE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-controls"""... $ac_c" 1>&6
+echo "configure:3817: checking "for --enable-controls"" >&5
+ no_cache=0
+ # Check whether --enable-controls or --disable-controls was given.
+if test "${enable_controls+set}" = set; then
+ enableval="$enable_controls"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_controls='wxUSE_CONTROLS=yes'
+ else
+ ac_cv_use_controls='wxUSE_CONTROLS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CONTROLS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_controls='wxUSE_CONTROLS='$DEFAULT_wxUSE_CONTROLS
+
+fi
+
+
+ eval "$ac_cv_use_controls"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_controls >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CONTROLS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+if test "$wxUSE_CONTROLS" = "yes"; then
+ DEFAULT_wxUSE_ACCEL=yes
+ DEFAULT_wxUSE_CARET=yes
+ DEFAULT_wxUSE_COMBOBOX=yes
+ DEFAULT_wxUSE_BMPBUTTON=yes
+ DEFAULT_wxUSE_CHECKBOX=yes
+ DEFAULT_wxUSE_CHECKLISTBOX=yes
+ DEFAULT_wxUSE_CHOICE=yes
+ DEFAULT_wxUSE_GAUGE=yes
+ DEFAULT_wxUSE_GRID=yes
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=yes
+ DEFAULT_wxUSE_LISTBOX=yes
+ DEFAULT_wxUSE_LISTCTRL=yes
+ DEFAULT_wxUSE_NOTEBOOK=yes
+ DEFAULT_wxUSE_RADIOBOX=yes
+ DEFAULT_wxUSE_RADIOBTN=yes
+ DEFAULT_wxUSE_SASH=yes
+ DEFAULT_wxUSE_SCROLLBAR=yes
+ DEFAULT_wxUSE_SLIDER=yes
+ DEFAULT_wxUSE_SPINBTN=yes
+ DEFAULT_wxUSE_SPINCTRL=yes
+ DEFAULT_wxUSE_SPLITTER=yes
+ DEFAULT_wxUSE_STATBMP=yes
+ DEFAULT_wxUSE_STATBOX=yes
+ DEFAULT_wxUSE_STATLINE=yes
+ DEFAULT_wxUSE_STATUSBAR=yes
+ DEFAULT_wxUSE_TAB_DIALOG=yes
+ DEFAULT_wxUSE_TOOLBAR=yes
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
+ DEFAULT_wxUSE_TOOLTIPS=yes
+ DEFAULT_wxUSE_TREECTRL=yes
+elif test "$wxUSE_CONTROLS" = "no"; then
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLISTBOX=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPINCTRL=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATUSBAR=no
+ DEFAULT_wxUSE_TAB_DIALOG=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=no
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_TREECTRL=no
+fi
+
+
+ echo $ac_n "checking "for --enable-accel"""... $ac_c" 1>&6
+echo "configure:3925: checking "for --enable-accel"" >&5
+ no_cache=0
+ # Check whether --enable-accel or --disable-accel was given.
+if test "${enable_accel+set}" = set; then
+ enableval="$enable_accel"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_accel='wxUSE_ACCEL=yes'
+ else
+ ac_cv_use_accel='wxUSE_ACCEL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ACCEL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_accel='wxUSE_ACCEL='$DEFAULT_wxUSE_ACCEL
+
+fi
+
+
+ eval "$ac_cv_use_accel"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_accel >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ACCEL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-caret"""... $ac_c" 1>&6
+echo "configure:3964: checking "for --enable-caret"" >&5
+ no_cache=0
+ # Check whether --enable-caret or --disable-caret was given.
+if test "${enable_caret+set}" = set; then
+ enableval="$enable_caret"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_caret='wxUSE_CARET=yes'
+ else
+ ac_cv_use_caret='wxUSE_CARET=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CARET" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_caret='wxUSE_CARET='$DEFAULT_wxUSE_CARET
+
+fi
+
+
+ eval "$ac_cv_use_caret"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_caret >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CARET" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-bmpbutton"""... $ac_c" 1>&6
+echo "configure:4003: checking "for --enable-bmpbutton"" >&5
+ no_cache=0
+ # Check whether --enable-bmpbutton or --disable-bmpbutton was given.
+if test "${enable_bmpbutton+set}" = set; then
+ enableval="$enable_bmpbutton"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=yes'
+ else
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BMPBUTTON" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON='$DEFAULT_wxUSE_BMPBUTTON
+
+fi
+
+
+ eval "$ac_cv_use_bmpbutton"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_bmpbutton >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BMPBUTTON" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-checkbox"""... $ac_c" 1>&6
+echo "configure:4042: checking "for --enable-checkbox"" >&5
+ no_cache=0
+ # Check whether --enable-checkbox or --disable-checkbox was given.
+if test "${enable_checkbox+set}" = set; then
+ enableval="$enable_checkbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_checkbox='wxUSE_CHECKBOX=yes'
+ else
+ ac_cv_use_checkbox='wxUSE_CHECKBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHECKBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_checkbox='wxUSE_CHECKBOX='$DEFAULT_wxUSE_CHECKBOX
+
+fi
+
+
+ eval "$ac_cv_use_checkbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_checkbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHECKBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-checklst"""... $ac_c" 1>&6
+echo "configure:4081: checking "for --enable-checklst"" >&5
+ no_cache=0
+ # Check whether --enable-checklst or --disable-checklst was given.
+if test "${enable_checklst+set}" = set; then
+ enableval="$enable_checklst"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_checklst='wxUSE_CHECKLST=yes'
+ else
+ ac_cv_use_checklst='wxUSE_CHECKLST=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHECKLST" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_checklst='wxUSE_CHECKLST='$DEFAULT_wxUSE_CHECKLST
+
+fi
+
+
+ eval "$ac_cv_use_checklst"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_checklst >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHECKLST" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-choice"""... $ac_c" 1>&6
+echo "configure:4120: checking "for --enable-choice"" >&5
+ no_cache=0
+ # Check whether --enable-choice or --disable-choice was given.
+if test "${enable_choice+set}" = set; then
+ enableval="$enable_choice"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_choice='wxUSE_CHOICE=yes'
+ else
+ ac_cv_use_choice='wxUSE_CHOICE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHOICE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_choice='wxUSE_CHOICE='$DEFAULT_wxUSE_CHOICE
+
+fi
+
+
+ eval "$ac_cv_use_choice"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_choice >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHOICE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-combobox"""... $ac_c" 1>&6
+echo "configure:4159: checking "for --enable-combobox"" >&5
+ no_cache=0
+ # Check whether --enable-combobox or --disable-combobox was given.
+if test "${enable_combobox+set}" = set; then
+ enableval="$enable_combobox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_combobox='wxUSE_COMBOBOX=yes'
+ else
+ ac_cv_use_combobox='wxUSE_COMBOBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COMBOBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_combobox='wxUSE_COMBOBOX='$DEFAULT_wxUSE_COMBOBOX
+
+fi
+
+
+ eval "$ac_cv_use_combobox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_combobox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COMBOBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-gauge"""... $ac_c" 1>&6
+echo "configure:4198: checking "for --enable-gauge"" >&5
+ no_cache=0
+ # Check whether --enable-gauge or --disable-gauge was given.
+if test "${enable_gauge+set}" = set; then
+ enableval="$enable_gauge"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gauge='wxUSE_GAUGE=yes'
+ else
+ ac_cv_use_gauge='wxUSE_GAUGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GAUGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gauge='wxUSE_GAUGE='$DEFAULT_wxUSE_GAUGE
+
+fi
+
+
+ eval "$ac_cv_use_gauge"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gauge >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GAUGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-grid"""... $ac_c" 1>&6
+echo "configure:4237: checking "for --enable-grid"" >&5
+ no_cache=0
+ # Check whether --enable-grid or --disable-grid was given.
+if test "${enable_grid+set}" = set; then
+ enableval="$enable_grid"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_grid='wxUSE_GRID=yes'
+ else
+ ac_cv_use_grid='wxUSE_GRID=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GRID" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_grid='wxUSE_GRID='$DEFAULT_wxUSE_GRID
+
+fi
+
+
+ eval "$ac_cv_use_grid"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_grid >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GRID" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-newgrid"""... $ac_c" 1>&6
+echo "configure:4276: checking "for --enable-newgrid"" >&5
+ no_cache=0
+ # Check whether --enable-newgrid or --disable-newgrid was given.
+if test "${enable_newgrid+set}" = set; then
+ enableval="$enable_newgrid"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_newgrid='wxUSE_NEW_GRID=yes'
+ else
+ ac_cv_use_newgrid='wxUSE_NEW_GRID=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NEW_GRID" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_newgrid='wxUSE_NEW_GRID='$DEFAULT_wxUSE_NEW_GRID
+
+fi
+
+
+ eval "$ac_cv_use_newgrid"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_newgrid >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NEW_GRID" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-imaglist"""... $ac_c" 1>&6
+echo "configure:4315: checking "for --enable-imaglist"" >&5
+ no_cache=0
+ # Check whether --enable-imaglist or --disable-imaglist was given.
+if test "${enable_imaglist+set}" = set; then
+ enableval="$enable_imaglist"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_imaglist='wxUSE_IMAGLIST=yes'
+ else
+ ac_cv_use_imaglist='wxUSE_IMAGLIST=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IMAGLIST" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_imaglist='wxUSE_IMAGLIST='$DEFAULT_wxUSE_IMAGLIST
+
+fi
+
+
+ eval "$ac_cv_use_imaglist"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_imaglist >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IMAGLIST" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-listbox"""... $ac_c" 1>&6
+echo "configure:4354: checking "for --enable-listbox"" >&5
+ no_cache=0
+ # Check whether --enable-listbox or --disable-listbox was given.
+if test "${enable_listbox+set}" = set; then
+ enableval="$enable_listbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_listbox='wxUSE_LISTBOX=yes'
+ else
+ ac_cv_use_listbox='wxUSE_LISTBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LISTBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_listbox='wxUSE_LISTBOX='$DEFAULT_wxUSE_LISTBOX
+
+fi
+
+
+ eval "$ac_cv_use_listbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_listbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LISTBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-listctrl"""... $ac_c" 1>&6
+echo "configure:4393: checking "for --enable-listctrl"" >&5
+ no_cache=0
+ # Check whether --enable-listctrl or --disable-listctrl was given.
+if test "${enable_listctrl+set}" = set; then
+ enableval="$enable_listctrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_listctrl='wxUSE_LISTCTRL=yes'
+ else
+ ac_cv_use_listctrl='wxUSE_LISTCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LISTCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_listctrl='wxUSE_LISTCTRL='$DEFAULT_wxUSE_LISTCTRL
+
+fi
+
+
+ eval "$ac_cv_use_listctrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_listctrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LISTCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-notebook"""... $ac_c" 1>&6
+echo "configure:4432: checking "for --enable-notebook"" >&5
+ no_cache=0
+ # Check whether --enable-notebook or --disable-notebook was given.
+if test "${enable_notebook+set}" = set; then
+ enableval="$enable_notebook"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_notebook='wxUSE_NOTEBOOK=yes'
+ else
+ ac_cv_use_notebook='wxUSE_NOTEBOOK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NOTEBOOK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_notebook='wxUSE_NOTEBOOK='$DEFAULT_wxUSE_NOTEBOOK
+
+fi
+
+
+ eval "$ac_cv_use_notebook"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_notebook >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NOTEBOOK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-radiobox"""... $ac_c" 1>&6
+echo "configure:4471: checking "for --enable-radiobox"" >&5
+ no_cache=0
+ # Check whether --enable-radiobox or --disable-radiobox was given.
+if test "${enable_radiobox+set}" = set; then
+ enableval="$enable_radiobox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_radiobox='wxUSE_RADIOBOX=yes'
+ else
+ ac_cv_use_radiobox='wxUSE_RADIOBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_RADIOBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_radiobox='wxUSE_RADIOBOX='$DEFAULT_wxUSE_RADIOBOX
+
+fi
+
+
+ eval "$ac_cv_use_radiobox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_radiobox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_RADIOBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-radiobtn"""... $ac_c" 1>&6
+echo "configure:4510: checking "for --enable-radiobtn"" >&5
+ no_cache=0
+ # Check whether --enable-radiobtn or --disable-radiobtn was given.
+if test "${enable_radiobtn+set}" = set; then
+ enableval="$enable_radiobtn"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN=yes'
+ else
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_RADIOBTN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN='$DEFAULT_wxUSE_RADIOBTN
+
+fi
+
+
+ eval "$ac_cv_use_radiobtn"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_radiobtn >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_RADIOBTN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-sash"""... $ac_c" 1>&6
+echo "configure:4549: checking "for --enable-sash"" >&5
+ no_cache=0
+ # Check whether --enable-sash or --disable-sash was given.
+if test "${enable_sash+set}" = set; then
+ enableval="$enable_sash"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_sash='wxUSE_SASH=yes'
+ else
+ ac_cv_use_sash='wxUSE_SASH=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SASH" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_sash='wxUSE_SASH='$DEFAULT_wxUSE_SASH
+
+fi
+
+
+ eval "$ac_cv_use_sash"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_sash >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SASH" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-scrollbar"""... $ac_c" 1>&6
+echo "configure:4588: checking "for --enable-scrollbar"" >&5
+ no_cache=0
+ # Check whether --enable-scrollbar or --disable-scrollbar was given.
+if test "${enable_scrollbar+set}" = set; then
+ enableval="$enable_scrollbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR=yes'
+ else
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SCROLLBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR='$DEFAULT_wxUSE_SCROLLBAR
+
+fi
+
+
+ eval "$ac_cv_use_scrollbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_scrollbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SCROLLBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-slider"""... $ac_c" 1>&6
+echo "configure:4627: checking "for --enable-slider"" >&5
+ no_cache=0
+ # Check whether --enable-slider or --disable-slider was given.
+if test "${enable_slider+set}" = set; then
+ enableval="$enable_slider"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_slider='wxUSE_SLIDER=yes'
+ else
+ ac_cv_use_slider='wxUSE_SLIDER=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SLIDER" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_slider='wxUSE_SLIDER='$DEFAULT_wxUSE_SLIDER
+
+fi
+
+
+ eval "$ac_cv_use_slider"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_slider >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SLIDER" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-spinbtn"""... $ac_c" 1>&6
+echo "configure:4666: checking "for --enable-spinbtn"" >&5
+ no_cache=0
+ # Check whether --enable-spinbtn or --disable-spinbtn was given.
+if test "${enable_spinbtn+set}" = set; then
+ enableval="$enable_spinbtn"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_spinbtn='wxUSE_SPINBTN=yes'
+ else
+ ac_cv_use_spinbtn='wxUSE_SPINBTN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPINBTN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_spinbtn='wxUSE_SPINBTN='$DEFAULT_wxUSE_SPINBTN
+
+fi
+
+
+ eval "$ac_cv_use_spinbtn"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_spinbtn >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPINBTN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-spinctrl"""... $ac_c" 1>&6
+echo "configure:4705: checking "for --enable-spinctrl"" >&5
+ no_cache=0
+ # Check whether --enable-spinctrl or --disable-spinctrl was given.
+if test "${enable_spinctrl+set}" = set; then
+ enableval="$enable_spinctrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL=yes'
+ else
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPINCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL='$DEFAULT_wxUSE_SPINCTRL
+
+fi
+
+
+ eval "$ac_cv_use_spinctrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_spinctrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPINCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-splitter"""... $ac_c" 1>&6
+echo "configure:4744: checking "for --enable-splitter"" >&5
+ no_cache=0
+ # Check whether --enable-splitter or --disable-splitter was given.
+if test "${enable_splitter+set}" = set; then
+ enableval="$enable_splitter"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splitter='wxUSE_SPLITTER=yes'
+ else
+ ac_cv_use_splitter='wxUSE_SPLITTER=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLITTER" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splitter='wxUSE_SPLITTER='$DEFAULT_wxUSE_SPLITTER
+
+fi
+
+
+ eval "$ac_cv_use_splitter"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splitter >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLITTER" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statbmp"""... $ac_c" 1>&6
+echo "configure:4783: checking "for --enable-statbmp"" >&5
+ no_cache=0
+ # Check whether --enable-statbmp or --disable-statbmp was given.
+if test "${enable_statbmp+set}" = set; then
+ enableval="$enable_statbmp"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbmp='wxUSE_STATBMP=yes'
+ else
+ ac_cv_use_statbmp='wxUSE_STATBMP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBMP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbmp='wxUSE_STATBMP='$DEFAULT_wxUSE_STATBMP
+
+fi
+
+
+ eval "$ac_cv_use_statbmp"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbmp >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBMP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statbox"""... $ac_c" 1>&6
+echo "configure:4822: checking "for --enable-statbox"" >&5
+ no_cache=0
+ # Check whether --enable-statbox or --disable-statbox was given.
+if test "${enable_statbox+set}" = set; then
+ enableval="$enable_statbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbox='wxUSE_STATBOX=yes'
+ else
+ ac_cv_use_statbox='wxUSE_STATBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbox='wxUSE_STATBOX='$DEFAULT_wxUSE_STATBOX
+
+fi
+
+
+ eval "$ac_cv_use_statbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statline"""... $ac_c" 1>&6
+echo "configure:4861: checking "for --enable-statline"" >&5
+ no_cache=0
+ # Check whether --enable-statline or --disable-statline was given.
+if test "${enable_statline+set}" = set; then
+ enableval="$enable_statline"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statline='wxUSE_STATLINE=yes'
+ else
+ ac_cv_use_statline='wxUSE_STATLINE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATLINE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statline='wxUSE_STATLINE='$DEFAULT_wxUSE_STATLINE
+
+fi
+
+
+ eval "$ac_cv_use_statline"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statline >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATLINE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statusbar"""... $ac_c" 1>&6
+echo "configure:4900: checking "for --enable-statusbar"" >&5
+ no_cache=0
+ # Check whether --enable-statusbar or --disable-statusbar was given.
+if test "${enable_statusbar+set}" = set; then
+ enableval="$enable_statusbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=yes'
+ else
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATUSBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statusbar='wxUSE_STATUSBAR='$DEFAULT_wxUSE_STATUSBAR
+
+fi
+
+
+ eval "$ac_cv_use_statusbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statusbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATUSBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-tabdialog"""... $ac_c" 1>&6
+echo "configure:4939: checking "for --enable-tabdialog"" >&5
+ no_cache=0
+ # Check whether --enable-tabdialog or --disable-tabdialog was given.
+if test "${enable_tabdialog+set}" = set; then
+ enableval="$enable_tabdialog"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=yes'
+ else
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TABDIALOG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG='$DEFAULT_wxUSE_TABDIALOG
+
+fi
+
+
+ eval "$ac_cv_use_tabdialog"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tabdialog >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TABDIALOG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-toolbar"""... $ac_c" 1>&6
+echo "configure:4978: checking "for --enable-toolbar"" >&5
+ no_cache=0
+ # Check whether --enable-toolbar or --disable-toolbar was given.
+if test "${enable_toolbar+set}" = set; then
+ enableval="$enable_toolbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=yes'
+ else
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_toolbar='wxUSE_TOOLBAR='$DEFAULT_wxUSE_TOOLBAR
+
+fi
+