Use the data scheme to load resources in the WebKitGTK+ implementation, rather than...

[wxWidgets.git] / src / common / textfile.cpp

diff --git a/src/common/textfile.cpp b/src/common/textfile.cpp
index ef27836e890285a6a51871130e301263e37ff7ee..91a86d5fb4b0e1ee6a856d87d30de9264a3ebd9d 100644 (file)
--- a/src/common/textfile.cpp
+++ b/src/common/textfile.cpp
@@ -64,7 +64,7 @@ bool wxTextFile::OnOpen(const wxString &strBufferName, wxTextBufferOpenMode Open
     switch ( OpenMode )
     {
         default:
     switch ( OpenMode )
     {
         default:

-            wxFAIL_MSG( _T("unknown open mode in wxTextFile::Open") );
+            wxFAIL_MSG( wxT("unknown open mode in wxTextFile::Open") );

             // fall through
 
         case ReadAccess :
             // fall through
 
         case ReadAccess :


@@ -89,18 +89,20 @@ bool wxTextFile::OnClose()
 bool wxTextFile::OnRead(const wxMBConv& conv)
 {
     // file should be opened
 bool wxTextFile::OnRead(const wxMBConv& conv)
 {
     // file should be opened

-    wxASSERT_MSG( m_file.IsOpened(), _T("can't read closed file") );
+    wxASSERT_MSG( m_file.IsOpened(), wxT("can't read closed file") );

 
     // read the entire file in memory: this is not the most efficient thing to
 
     // read the entire file in memory: this is not the most efficient thing to

-    // do but there is no good way to avoid it in Unicode build because if we
-    // read the file block by block we can't convert each block to Unicode
+    // do it but there is no good way to avoid it in Unicode build because if
+    // we read the file block by block we can't convert each block to Unicode

     // separately (the last multibyte char in the block might be only partially
     // read and so the conversion would fail) and, as the file contents is kept
     // in memory by wxTextFile anyhow, it shouldn't be a big problem to read
     // the file entirely
     // separately (the last multibyte char in the block might be only partially
     // read and so the conversion would fail) and, as the file contents is kept
     // in memory by wxTextFile anyhow, it shouldn't be a big problem to read
     // the file entirely

-    size_t bufSize = 0,
-           bufPos = 0;
-    char block[1024];
+    size_t bufSize = 0;
+
+    // number of bytes to (try to) read from disk at once
+    static const size_t BLOCK_SIZE = 4096;
+

     wxCharBuffer buf;
 
     // first determine if the file is seekable or not and so whether we can
     wxCharBuffer buf;
 
     // first determine if the file is seekable or not and so whether we can


@@ -118,57 +120,79 @@ bool wxTextFile::OnRead(const wxMBConv& conv)
     {
         // we know the required length, so set the buffer size in advance
         bufSize = fileLength;
     {
         // we know the required length, so set the buffer size in advance
         bufSize = fileLength;

-        if ( !buf.extend(bufSize - 1 /* it adds 1 internally */) )
+        if ( !buf.extend(bufSize) )

             return false;
 
         // if the file is seekable, also check that we're at its beginning
             return false;
 
         // if the file is seekable, also check that we're at its beginning

-        wxASSERT_MSG( m_file.Tell() == 0, _T("should be at start of file") );
-    }
+        wxASSERT_MSG( m_file.Tell() == 0, wxT("should be at start of file") );

 
 

-    for ( ;; )
-    {
-        ssize_t nRead = m_file.Read(block, WXSIZEOF(block));
-
-        if ( nRead == wxInvalidOffset )
+        char *dst = buf.data();
+        for ( size_t nRemaining = bufSize; nRemaining > 0; )

         {
         {

-            // read error (error message already given in wxFile::Read)
-            return false;
-        }
+            size_t nToRead = BLOCK_SIZE;

 
 

-        if ( nRead == 0 )
-        {
-            // if no bytes have been read, presumably this is a valid-but-empty file
-            if ( bufPos == 0 )
-                return true;
+            // the file size could have changed, avoid overflowing the buffer
+            // even if it did
+            if ( nToRead > nRemaining )
+                nToRead = nRemaining;

 
 

-            // otherwise we've finished reading the file
-            break;
-        }
+            ssize_t nRead = m_file.Read(dst, nToRead);

 
 

-        if ( seekable )
-        {
-            // this shouldn't happen but don't overwrite the buffer if it does
-            wxCHECK_MSG( bufPos + nRead <= bufSize, false,
-                         _T("read more than file length?") );
-        }
-        else // !seekable
-        {
-            // for non-seekable files we have to allocate more memory on the go
-            if ( !buf.extend(bufPos + nRead - 1 /* it adds 1 internally */) )
+            if ( nRead == wxInvalidOffset )
+            {
+                // read error (error message already given in wxFile::Read)

                 return false;
                 return false;

+            }
+
+            if ( nRead == 0 )
+            {
+                // this file can't be empty because we checked for this above
+                // so this must be the end of file
+                break;
+            }
+
+            dst += nRead;
+            nRemaining -= nRead;

         }
 
         }
 

-        // append to the buffer
-        memcpy(buf.data() + bufPos, block, nRead);
-        bufPos += nRead;
+        wxASSERT_MSG( dst - buf.data() == (wxFileOffset)bufSize,
+                      wxT("logic error") );

     }
     }

-
-    if ( !seekable )
+    else // file is not seekable

     {
     {

-        bufSize = bufPos;
+        char block[BLOCK_SIZE];
+        for ( ;; )
+        {
+            ssize_t nRead = m_file.Read(block, WXSIZEOF(block));
+
+            if ( nRead == wxInvalidOffset )
+            {
+                // read error (error message already given in wxFile::Read)
+                return false;
+            }
+
+            if ( nRead == 0 )
+            {
+                // if no bytes have been read, presumably this is a
+                // valid-but-empty file
+                if ( bufSize == 0 )
+                    return true;
+
+                // otherwise we've finished reading the file
+                break;
+            }
+
+            // extend the buffer for new data
+            if ( !buf.extend(bufSize + nRead) )
+                return false;
+
+            // and append it to the buffer
+            memcpy(buf.data() + bufSize, block, nRead);
+            bufSize += nRead;
+        }

     }
 
     }
 

-    const wxString str(buf, conv, bufPos);
+    const wxString str(buf, conv, bufSize);

 
     // there's no risk of this happening in ANSI build
 #if wxUSE_UNICODE
 
     // there's no risk of this happening in ANSI build
 #if wxUSE_UNICODE


@@ -179,7 +203,8 @@ bool wxTextFile::OnRead(const wxMBConv& conv)
     }
 #endif // wxUSE_UNICODE
 
     }
 #endif // wxUSE_UNICODE
 

-    free(buf.release()); // we don't need this memory any more
+    // we don't need this memory any more
+    buf.reset();

 
 
     // now break the buffer in lines
 
 
     // now break the buffer in lines