Applied patch [ 827011 ] Event-based processing of item tooltips in wxTreeCtrl

[wxWidgets.git] / docs / latex / wx / txtstrm.tex

diff --git a/docs/latex/wx/txtstrm.tex b/docs/latex/wx/txtstrm.tex
index 06a37e88bc3e77cde17a52cb59d33442834a9ed7..50d70b79e40f7c0c9a21e48ab8ded3f5fafa4e9f 100644 (file)
--- a/docs/latex/wx/txtstrm.tex
+++ b/docs/latex/wx/txtstrm.tex
@@ -13,9 +13,16 @@ Operator >> is overloaded and you can use this class like a standard C++ iostrea
 Note, however, that the arguments are the fixed size types wxUint32, wxInt32 etc
 and on a typical 32-bit computer, none of these match to the "long" type (wxInt32
 is defined as int on 32-bit architectures) so that you cannot use long. To avoid
 Note, however, that the arguments are the fixed size types wxUint32, wxInt32 etc
 and on a typical 32-bit computer, none of these match to the "long" type (wxInt32
 is defined as int on 32-bit architectures) so that you cannot use long. To avoid

-problems (here and elsewhere), make use of the wxInt32, wxUint32, etc types.
+problems (here and elsewhere), make use of wxInt32, wxUint32 and similar types.
+
+If you're scanning through a file using wxTextInputStream, you should check for EOF {\bf before}
+reading the next item (word / number), because otherwise the last item may get lost. 
+You should however be prepared to receive an empty item (empty string / zero number) at the
+end of file, especially on Windows systems. This is unavoidable because most (but not all) files end
+with whitespace (i.e. usually a newline).

 
 For example:
 
 For example:

+

 \begin{verbatim}
   wxFileInputStream input( "mytext.txt" );
   wxTextInputStream text( input );
 \begin{verbatim}
   wxFileInputStream input( "mytext.txt" );
   wxTextInputStream text( input );


@@ -36,14 +43,20 @@ For example:
 
 \membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamconstr}
 
 
 \membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamconstr}
 

-\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}}
+\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}, \param{const wxString\&}{ sep=" $\backslash$t"}, 
+  \param{wxMBConv\&}{ conv = wxConvUTF8} }

 
 Constructs a text stream object from an input stream. Only read methods will
 be available.
 
 \wxheading{Parameters}
 
 
 Constructs a text stream object from an input stream. Only read methods will
 be available.
 
 \wxheading{Parameters}
 

-\docparam{stream}{The input stream.}
+\docparam{stream}{The underlying input stream.}
+
+\docparam{sep}{The initial string separator characters.}
+
+\docparam{conv}{{\it In Unicode build only:} The encoding converter used to convert the bytes in the
+  underlying input stream to characters.}

 
 \membersection{wxTextInputStream::\destruct{wxTextInputStream}}
 
 
 \membersection{wxTextInputStream::\destruct{wxTextInputStream}}
 


@@ -51,23 +64,70 @@ be available.
 
 Destroys the wxTextInputStream object.
 
 
 Destroys the wxTextInputStream object.
 

-\membersection{wxTextInputStream::Read8}
+\membersection{wxTextInputStream::Read8}\label{wxtextinputstreamread8}
+
+\func{wxUint8}{Read8}{\param{int}{ base = 10}}
+
+Reads a single unsigned byte from the stream, given in base {\it base}.
+
+The value of {\it base} must be comprised between $2$ and $36$, inclusive, or
+be a special value $0$ which means that the usual rules of {\tt C} numbers are
+applied: if the number starts with {\tt 0x} it is considered to be in base
+$16$, if it starts with {\tt 0} - in base $8$ and in base $10$ otherwise. Note
+that you may not want to specify the base $0$ if you are parsing the numbers
+which may have leading zeroes as they can yield unexpected (to the user not
+familiar with C) results.
+
+\membersection{wxTextInputStream::Read8S}
+
+\func{wxInt8}{Read8S}{\param{int}{ base = 10}}

 
 

-\func{wxUint8}{Read8}{\void}
+Reads a single signed byte from the stream.

 
 

-Reads a single byte from the stream.
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.

 
 \membersection{wxTextInputStream::Read16}
 
 
 \membersection{wxTextInputStream::Read16}
 

-\func{wxUint16}{Read16}{\void}
+\func{wxUint16}{Read16}{\param{int}{ base = 10}}

 
 

-Reads a 16 bit integer from the stream.
+Reads a unsigned 16 bit integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::Read16S}
+
+\func{wxInt16}{Read16S}{\param{int}{ base = 10}}
+
+Reads a signed 16 bit integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.

 
 \membersection{wxTextInputStream::Read32}
 
 
 \membersection{wxTextInputStream::Read32}
 

-\func{wxUint16}{Read32}{\void}
+\func{wxUint32}{Read32}{\param{int}{ base = 10}}
+
+Reads a 32 bit unsigned integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::Read32S}
+
+\func{wxInt32}{Read32S}{\param{int}{ base = 10}}

 
 

-Reads a 32 bit integer from the stream.
+Reads a 32 bit signed integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::ReadChar}\label{wxtextinputstreamreadchar}
+
+\func{wxChar}{wxTextInputStream::ReadChar}{\void}
+
+Reads a character, returns $0$ if there are no more characters in the stream.

 
 \membersection{wxTextInputStream::ReadDouble}
 
 
 \membersection{wxTextInputStream::ReadDouble}
 


@@ -75,12 +135,41 @@ Reads a 32 bit integer from the stream.
 
 Reads a double (IEEE encoded) from the stream.
 
 
 Reads a double (IEEE encoded) from the stream.
 

+\membersection{wxTextInputStream::ReadLine}\label{wxtextinputstreamreadline}
+
+\func{wxString}{wxTextInputStream::ReadLine}{\void}
+
+Reads a line from the input stream and returns it (without the end of line
+character).
+

 \membersection{wxTextInputStream::ReadString}
 
 \func{wxString}{wxTextInputStream::ReadString}{\void}
 
 \membersection{wxTextInputStream::ReadString}
 
 \func{wxString}{wxTextInputStream::ReadString}{\void}
 

-Reads a line from the stream. A line is a string which ends with
-$\backslash$n or $\backslash$r$\backslash$n or $\backslash$r.
+{\bf NB:} This method is deprecated, use \helpref{ReadLine}{wxtextinputstreamreadline} 
+or \helpref{ReadWord}{wxtextinputstreamreadword} instead.
+
+Same as \helpref{ReadLine}{wxtextinputstreamreadline}.
+
+\membersection{wxTextInputStream::ReadWord}\label{wxtextinputstreamreadword}
+
+\func{wxString}{wxTextInputStream::ReadWord}{\void}
+
+Reads a word (a sequence of characters until the next separator) from the
+input stream.
+
+\wxheading{See also}
+
+\helpref{SetStringSeparators}{wxtextinputstreamsetstringseparators}
+
+\membersection{wxTextInputStream::SetStringSeparators}\label{wxtextinputstreamsetstringseparators}
+
+\func{void}{SetStringSeparators}{\param{const wxString\& }{sep}}
+
+Sets the characters which are used to define the word boundaries in 
+\helpref{ReadWord}{wxtextinputstreamreadword}.
+
+The default separators are the space and {\tt TAB} characters.

 
 % ----------------------------------------------------------------------------
 % wxTextOutputStream
 
 % ----------------------------------------------------------------------------
 % wxTextOutputStream


@@ -92,6 +181,7 @@ This class provides functions that write text datas using an output stream.
 So, you can write {\it text} floats, integers.
 
 You can also simulate the C++ cout class:
 So, you can write {\it text} floats, integers.
 
 You can also simulate the C++ cout class:

+

 \begin{verbatim}
   wxFFileOutputStream output( stderr );
   wxTextOutputStream cout( output );
 \begin{verbatim}
   wxFFileOutputStream output( stderr );
   wxTextOutputStream cout( output );


@@ -117,7 +207,7 @@ be available.
 
 \docparam{stream}{The output stream.}
 
 
 \docparam{stream}{The output stream.}
 

-\docparam{mode}{The end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} or {\bf wxEOL\_UNIX}.}
+\docparam{mode}{The end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.}

 
 \membersection{wxTextOutputStream::\destruct{wxTextOutputStream}}
 
 
 \membersection{wxTextOutputStream::\destruct{wxTextOutputStream}}
 


@@ -129,13 +219,13 @@ Destroys the wxTextOutputStream object.
 
 \func{wxEOL}{wxTextOutputStream::GetMode}{\void}
 
 
 \func{wxEOL}{wxTextOutputStream::GetMode}{\void}
 

-Returns the end-of-line mode. One of {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} or {\bf wxEOL\_UNIX}.
+Returns the end-of-line mode. One of {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.

 
 \membersection{wxTextOutputStream::SetMode}
 
 \func{void}{wxTextOutputStream::SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}}
 
 
 \membersection{wxTextOutputStream::SetMode}
 
 \func{void}{wxTextOutputStream::SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}}
 

-Set the end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} or {\bf wxEOL\_UNIX}.
+Set the end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.

 
 \membersection{wxTextOutputStream::Write8}
 
 
 \membersection{wxTextOutputStream::Write8}
 


@@ -165,6 +255,7 @@ Writes the double {\it f} to the stream using the IEEE format.
 
 \func{virtual void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}}
 
 
 \func{virtual void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}}
 

-Writes {\it string} as a line. Depending on the end-of-line mode, it adds
-$\backslash$n, $\backslash$r or $\backslash$r$\backslash$n.
+Writes {\it string} as a line. Depending on the end-of-line mode the end of
+line ('$\backslash$n') characters in the string are converted to the correct
+line ending terminator.