Typo correction

[wxWidgets.git] / docs / latex / wx / tevent.tex

diff --git a/docs/latex/wx/tevent.tex b/docs/latex/wx/tevent.tex
index a69b2f5350176a9280d938818edafeb394ca3705..e4a42328aebb98b162c2398e35e36ec47c497c2a 100644 (file)
--- a/docs/latex/wx/tevent.tex
+++ b/docs/latex/wx/tevent.tex
@@ -2,17 +2,17 @@
 
 Classes: \helpref{wxEvtHandler}{wxevthandler}, \helpref{wxWindow}{wxwindow}, \helpref{wxEvent}{wxevent}
 
 
 Classes: \helpref{wxEvtHandler}{wxevthandler}, \helpref{wxWindow}{wxwindow}, \helpref{wxEvent}{wxevent}
 

-\subsection{Introduction}
+\subsection{Introduction}\label{eventintroduction}

 
 

-Before version 2.0 of wxWindows, events were handled by the application
+Before version 2.0 of wxWidgets, events were handled by the application

 either by supplying callback functions, or by overriding virtual member
 functions such as {\bf OnSize}.
 
 either by supplying callback functions, or by overriding virtual member
 functions such as {\bf OnSize}.
 

-From wxWindows 2.0, {\it event tables} are used instead, with a few exceptions.
+From wxWidgets 2.0, {\it event tables} are used instead, with a few exceptions.

 
 

-An event table is placed in an implementation file to tell wxWindows how to map
+An event table is placed in an implementation file to tell wxWidgets how to map

 events to member functions. These member functions are not virtual functions, but
 events to member functions. These member functions are not virtual functions, but

-they all similar in form: they take a single wxEvent-derived argument, and have a void return
+they are all similar in form: they take a single wxEvent-derived argument, and have a void return

 type.
 
 Here's an example of an event table.
 type.
 
 Here's an example of an event table.


@@ -26,63 +26,82 @@ BEGIN_EVENT_TABLE(MyFrame, wxFrame)
 END_EVENT_TABLE()
 \end{verbatim}
 
 END_EVENT_TABLE()
 \end{verbatim}
 

-The first two entries map menu commands to two different member functions. The EVT\_SIZE macro
-doesn't need a window identifier, since normally you are only interested in the
-current window's size events. (In fact you could intercept a particular window's size event
-by using EVT\_CUSTOM(wxEVT\_SIZE, id, func).)
-
-The EVT\_BUTTON macro demonstrates that the originating event does not have to come from
-the window class implementing the event table - if the event source is a button within a panel within a frame, this will still
-work, because event tables are searched up through the hierarchy of windows. In this
-case, the button's event table will be searched, then the parent panel's, then the frame's.
-
-As mentioned before, the member functions that handle events do not have to be virtual.
-Indeed, the member functions should not be virtual as the event handler ignores that
-the functions are virtual, i.e. overriding a virtual member function in a derived class
-will not have any effect.
-These member functions take an event argument, and the class of event differs according
-to the type of event and the class of the originating window. For size
-events, \helpref{wxSizeEvent}{wxsizeevent} is used. For menu commands and most control
-commands (such as button presses), \helpref{wxCommandEvent}{wxcommandevent} is used.
-When controls get more complicated, then specific event classes are used, such
-as \helpref{wxTreeEvent}{wxtreeevent} for events from \helpref{wxTreeCtrl}{wxtreectrl} windows.
-
-As well as the event table in the implementation file, there must be a DECLARE\_EVENT\_TABLE
-macro in the class definition. For example:
+The first two entries map menu commands to two different member functions. The
+EVT\_SIZE macro doesn't need a window identifier, since normally you are only
+interested in the current window's size events.
+
+The EVT\_BUTTON macro demonstrates that the originating event does not have to
+come from the window class implementing the event table -- if the event source
+is a button within a panel within a frame, this will still work, because event
+tables are searched up through the hierarchy of windows for the command events.
+In this case, the button's event table will be searched, then the parent
+panel's, then the frame's.
+
+As mentioned before, the member functions that handle events do not have to be
+virtual. Indeed, the member functions should not be virtual as the event
+handler ignores that the functions are virtual, i.e. overriding a virtual
+member function in a derived class will not have any effect. These member
+functions take an event argument, and the class of event differs according to
+the type of event and the class of the originating window. For size events, 
+\helpref{wxSizeEvent}{wxsizeevent} is used. For menu commands and most
+control commands (such as button presses), 
+\helpref{wxCommandEvent}{wxcommandevent} is used. When controls get more
+complicated, then specific event classes are used, such as 
+\helpref{wxTreeEvent}{wxtreeevent} for events from 
+\helpref{wxTreeCtrl}{wxtreectrl} windows.
+
+As well as the event table in the implementation file, there must also be a
+DECLARE\_EVENT\_TABLE macro somewhere in the class declaration. For example:

 
 {\small%
 \begin{verbatim}
 
 {\small%
 \begin{verbatim}

-class MyFrame: public wxFrame {
-
-  DECLARE_DYNAMIC_CLASS(MyFrame)
-
+class MyFrame : public wxFrame
+{

 public:
   ...
   void OnExit(wxCommandEvent& event);
   void OnSize(wxSizeEvent& event);
 public:
   ...
   void OnExit(wxCommandEvent& event);
   void OnSize(wxSizeEvent& event);

+

 protected:
   int       m_count;
   ...
 protected:
   int       m_count;
   ...

+

   DECLARE_EVENT_TABLE()
 };
 \end{verbatim}
 }%
 
   DECLARE_EVENT_TABLE()
 };
 \end{verbatim}
 }%
 

+Note that this macro may occur in any section of the class (public, protected
+or private) but that it is probably better to insert it at the end, as shown,
+because this macro implicitly changes the access to protected which may be
+quite unexpected if there is anything following it.
+
+Finally, if you don't like using macros for static initialization of the event
+tables you may also use \helpref{wxEvtHandler::Connect}{wxevthandlerconnect} to
+connect the events to the handlers dynamically, during run-time. See the
+\helpref{event sample}{sampleevent} for an example of doing it.
+
+

 \subsection{How events are processed}\label{eventprocessing}
 
 \subsection{How events are processed}\label{eventprocessing}
 

-When an event is received from the windowing system, wxWindows calls \helpref{wxEvtHandler::ProcessEvent}{wxevthandlerprocessevent} on
-the first event handler object belonging to the window generating the event.
+When an event is received from the windowing system, wxWidgets calls 
+\helpref{wxEvtHandler::ProcessEvent}{wxevthandlerprocessevent} on the first
+event handler object belonging to the window generating the event.

 
 

-It may be noted that wxWindows' event processing system implements something
+It may be noted that wxWidgets' event processing system implements something

 very close to virtual methods in normal C++, i.e. it is possible to alter
 the behaviour of a class by overriding its event handling functions. In
 many cases this works even for changing the behaviour of native controls.
 very close to virtual methods in normal C++, i.e. it is possible to alter
 the behaviour of a class by overriding its event handling functions. In
 many cases this works even for changing the behaviour of native controls.

-E.g. it is possible to filter out a number of key events sent by the
+For example it is possible to filter out a number of key events sent by the

 system to a native text control by overriding wxTextCtrl and defining a
 system to a native text control by overriding wxTextCtrl and defining a

-handler for key events using EVT_KEY_DOWN. This would in-deed prevent
+handler for key events using EVT\_KEY\_DOWN. This would indeed prevent

 any key events from being sent to the native control - which might not be
 what is desired. In this case the event handler function has to call Skip()
 any key events from being sent to the native control - which might not be
 what is desired. In this case the event handler function has to call Skip()

-so as to indicate that it did NOT handle the event at all.
+so as to indicate that the search for the event handler should continue.
+
+To summarize, instead of explicitly calling the base class version as you
+would have done with C++ virtual functions (i.e. {\it wxTextCtrl::OnChar()}),
+you should instead call \helpref{Skip}{wxeventskip}.

 
 In practice, this would look like this if the derived text control only
 accepts 'a' to 'z' and 'A' to 'Z':
 
 In practice, this would look like this if the derived text control only
 accepts 'a' to 'z' and 'A' to 'Z':


@@ -94,20 +113,19 @@ void MyTextCtrl::OnChar(wxKeyEvent& event)
     if ( isalpha( event.KeyCode() ) )
     {
        // key code is within legal range. we call event.Skip() so the
     if ( isalpha( event.KeyCode() ) )
     {
        // key code is within legal range. we call event.Skip() so the

-       // event can be processed either in the base wxWindows class
+       // event can be processed either in the base wxWidgets class

        // or the native control.
        // or the native control.

-       
-       event.Skip(); 
+
+       event.Skip();

     }
     else
     {
        // illegal key hit. we don't call event.Skip() so the
        // event is not processed anywhere else.
     }
     else
     {
        // illegal key hit. we don't call event.Skip() so the
        // event is not processed anywhere else.

-       
+

        wxBell();
     }
 }
        wxBell();
     }
 }

-

 \end{verbatim}
 }%
 
 \end{verbatim}
 }%
 


@@ -118,24 +136,61 @@ The normal order of event table searching by ProcessEvent is as follows:
 \item If the object is disabled (via a call to \helpref{wxEvtHandler::SetEvtHandlerEnabled}{wxevthandlersetevthandlerenabled})
 the function skips to step (6).
 \item If the object is a wxWindow, {\bf ProcessEvent} is recursively called on the window's\rtfsp
 \item If the object is disabled (via a call to \helpref{wxEvtHandler::SetEvtHandlerEnabled}{wxevthandlersetevthandlerenabled})
 the function skips to step (6).
 \item If the object is a wxWindow, {\bf ProcessEvent} is recursively called on the window's\rtfsp

-\helpref{wxValidator}{wxvalidator}. If this returns TRUE, the function exits.
+\helpref{wxValidator}{wxvalidator}. If this returns true, the function exits.

 \item {\bf SearchEventTable} is called for this event handler. If this fails, the base
 class table is tried, and so on until no more tables exist or an appropriate function was found,
 in which case the function exits.
 \item The search is applied down the entire chain of event handlers (usually the chain has a length
 of one). If this succeeds, the function exits.
 \item {\bf SearchEventTable} is called for this event handler. If this fails, the base
 class table is tried, and so on until no more tables exist or an appropriate function was found,
 in which case the function exits.
 \item The search is applied down the entire chain of event handlers (usually the chain has a length
 of one). If this succeeds, the function exits.

-\item If the object is a wxWindow and the event is a wxCommandEvent, {\bf ProcessEvent} is
-recursively applied to the parent window's event handler. If this returns TRUE, the function exits.
+\item If the object is a wxWindow and the event is set to set to propagate (in the library only
+wxCommandEvent based events are set to propagate), {\bf ProcessEvent} is recursively applied
+to the parent window's event handler. If this returns true, the function exits.

 \item Finally, {\bf ProcessEvent} is called on the wxApp object.
 \end{enumerate}
 
 \item Finally, {\bf ProcessEvent} is called on the wxApp object.
 \end{enumerate}
 

+{\bf Pay close attention to Step 5.}  People often overlook or get
+confused by this powerful feature of the wxWidgets event processing
+system.  To put it a different way, events set to propagate 
+(\helpref{See: wxEvent::ShouldPropagate}{wxeventshouldpropagate})
+(most likely derived either directly or indirectly from wxCommandEvent)
+will travel up the containment hierarchy from child to parent until the 
+maximal propagation level is reached or an event handler is found that
+doesn't call \helpref{event.Skip()}{wxeventskip}.
+
+Finally, there is another additional complication (which, in fact, simplifies
+life of wxWidgets programmers significantly): when propagating the command
+events upwards to the parent window, the event propagation stops when it
+reaches the parent dialog, if any. This means that you don't risk to get
+unexpected events from the dialog controls (which might be left unprocessed by
+the dialog itself because it doesn't care about them) when a modal dialog is
+popped up. The events do propagate beyond the frames, however. The rationale
+for this choice is that there are only a few frames in a typical application
+and their parent-child relation are well understood by the programmer while it
+may be very difficult, if not impossible, to track down all the dialogs which
+may be popped up in a complex program (remember that some are created
+automatically by wxWidgets). If you need to specify a different behaviour for
+some reason, you can use 
+\helpref{SetExtraStyle(wxWS\_EX\_BLOCK\_EVENTS)}{wxwindowsetextrastyle} 
+explicitly to prevent the events from being propagated beyond the given window
+or unset this flag for the dialogs which have it on by default.
+
+Typically events that deal with a window as a window (size, motion,
+paint, mouse, keyboard, etc.) are sent only to the window.  Events
+that have a higher level of meaning and/or are generated by the window
+itself, (button click, menu select, tree expand, etc.) are command
+events and are sent up to the parent to see if it is interested in the
+event.
+

 Note that your application may wish to override ProcessEvent to redirect processing of
 events. This is done in the document/view framework, for example, to allow event handlers
 Note that your application may wish to override ProcessEvent to redirect processing of
 events. This is done in the document/view framework, for example, to allow event handlers

-to be defined in the document or view.
+to be defined in the document or view. To test for command events (which will probably
+be the only events you wish to redirect), you may use 
+\helpref{wxEvent::IsCommandEvent}{wxeventiscommandevent} for efficiency, 
+instead of using the slower run-time type system.

 
 As mentioned above, only command events are recursively applied to the parents event
 
 As mentioned above, only command events are recursively applied to the parents event

-handler. As this quite often causes confusion for users, here is a list of system
-events which will NOT get sent to the parent's event handler:
+handler in the library itself. As this quite often causes confusion for users,
+here is a list of system events which will NOT get sent to the parent's event handler:

 
 \begin{twocollist}\itemsep=0pt
 \twocolitem{\helpref{wxEvent}{wxevent}}{The event base class}
 
 \begin{twocollist}\itemsep=0pt
 \twocolitem{\helpref{wxEvent}{wxevent}}{The event base class}


@@ -152,18 +207,37 @@ events which will NOT get sent to the parent's event handler:
 \twocolitem{\helpref{wxMoveEvent}{wxmoveevent}}{A move event}
 \twocolitem{\helpref{wxPaintEvent}{wxpaintevent}}{A paint event}
 \twocolitem{\helpref{wxQueryLayoutInfoEvent}{wxquerylayoutinfoevent}}{Used to query layout information}
 \twocolitem{\helpref{wxMoveEvent}{wxmoveevent}}{A move event}
 \twocolitem{\helpref{wxPaintEvent}{wxpaintevent}}{A paint event}
 \twocolitem{\helpref{wxQueryLayoutInfoEvent}{wxquerylayoutinfoevent}}{Used to query layout information}

+\twocolitem{\helpref{wxSetCursorEvent}{wxsetcursorevent}}{Used for special cursor processing based on current mouse position}

 \twocolitem{\helpref{wxSizeEvent}{wxsizeevent}}{A size event}
 \twocolitem{\helpref{wxSizeEvent}{wxsizeevent}}{A size event}

+\twocolitem{\helpref{wxScrollWinEvent}{wxscrollwinevent}}{A scroll event sent by a scrolled window (not a scroll bar)}

 \twocolitem{\helpref{wxSysColourChangedEvent}{wxsyscolourchangedevent}}{A system colour change event}
 \twocolitem{\helpref{wxUpdateUIEvent}{wxupdateuievent}}{A user interface update event}
 \end{twocollist}
 
 In some cases, it might be desired by the programmer to get a certain number
 \twocolitem{\helpref{wxSysColourChangedEvent}{wxsyscolourchangedevent}}{A system colour change event}
 \twocolitem{\helpref{wxUpdateUIEvent}{wxupdateuievent}}{A user interface update event}
 \end{twocollist}
 
 In some cases, it might be desired by the programmer to get a certain number

-of system events in a parent window, e.g. all key events sent to, but not
+of system events in a parent window, for example all key events sent to, but not

 used by, the native controls in a dialog. In this case, a special event handler
 will have to be written that will override ProcessEvent() in order to pass
 used by, the native controls in a dialog. In this case, a special event handler
 will have to be written that will override ProcessEvent() in order to pass

-all events (or any selection of them) to the parent window. See next section.
-
-\subsection{Pluggable event handlers}
+all events (or any selection of them) to the parent window.
+
+% VZ: it doesn't work like this, but just in case we ever reenable this
+%     behaviour, I leave it here
+%
+% \subsection{Redirection of command events to the window with the focus}
+% 
+% The usual upward search through the window hierarchy for command event
+% handlers does not always meet an application's requirements. Say you have two
+% wxTextCtrl windows in a frame, plus a toolbar with Cut, Copy and Paste
+% buttons. To avoid the need to define event handlers in the frame
+% and redirect them explicitly to the window with the focus, command events
+% are sent to the window with the focus first, for
+% menu and toolbar command and UI update events only. This means that
+% each window can handle its own commands and UI updates independently. In
+% fact wxTextCtrl can handle Cut, Copy, Paste, Undo and Redo commands and UI update
+% requests, so no extra coding is required to support them in your menus and
+% toolbars.
+
+\subsection{Pluggable event handlers}\label{pluggablehandlers}

 
 In fact, you don't have to derive a new class from a window class
 if you don't want to. You can derive a new class from wxEvtHandler instead,
 
 In fact, you don't have to derive a new class from a window class
 if you don't want to. You can derive a new class from wxEvtHandler instead,


@@ -191,33 +265,96 @@ the original event handler. Use PushEventHandler/PopEventHandler
 to form a chain of event handlers, where each handler processes a different
 range of events independently from the other handlers.
 
 to form a chain of event handlers, where each handler processes a different
 range of events independently from the other handlers.
 

-\subsection{Event macros summary}\label{eventmacros}
-
-\wxheading{Specifying an event table}
-
-\twocolwidtha{8cm}%
-\begin{twocollist}\itemsep=0pt
-\twocolitem{\windowstyle{EVT\_CUSTOM(eventId, id, func)}}{Allows you to add a custom event table
-entry by specifying the event identifier (such as wxEVT\_SIZE), the window identifier,
-and a member function to call.}
-\twocolitem{\windowstyle{EVT\_CUSTOM\_RANGE(eventId, id1, id2, func)}}{The same as EVT\_CUSTOM,
-but responds to a range of window identifiers.}
-\end{twocollist}
+\subsection{Window identifiers}\label{windowids}
+
+\index{identifiers}\index{wxID}Window identifiers are integers, and are used to
+uniquely determine window identity in the event system (though you can use it
+for other purposes). In fact, identifiers do not need to be unique
+across your entire application just so long as they are unique within a
+particular context you're interested in, such as a frame and its children. You
+may use the {\tt wxID\_OK} identifier, for example, on any number of dialogs so
+long as you don't have several within the same dialog.
+
+If you pass {\tt wxID\_ANY} to a window constructor, an identifier will be
+generated for you automatically by wxWidgets. This is useful when you don't
+care about the exact identifier either because you're not going to process the
+events from the control being created at all or because you process the events
+from all controls in one place (in which case you should specify {\tt wxID\_ANY} 
+in the event table or \helpref{wxEvtHandler::Connect}{wxevthandlerconnect} call
+as well. The automatically generated identifiers are always negative and so
+will never conflict with the user-specified identifiers which must be always
+positive.
+
+The following standard identifiers are supplied. You can use wxID\_HIGHEST to
+determine the number above which it is safe to define your own identifiers. Or,
+you can use identifiers below wxID\_LOWEST.

 
 

-\wxheading{Generic event table macros}
+\begin{verbatim}
+#define wxID_ANY                -1
+
+#define wxID_LOWEST             4999
+
+#define wxID_OPEN               5000
+#define wxID_CLOSE              5001
+#define wxID_NEW                5002
+#define wxID_SAVE               5003
+#define wxID_SAVEAS             5004
+#define wxID_REVERT             5005
+#define wxID_EXIT               5006
+#define wxID_UNDO               5007
+#define wxID_REDO               5008
+#define wxID_HELP               5009
+#define wxID_PRINT              5010
+#define wxID_PRINT_SETUP        5011
+#define wxID_PREVIEW            5012
+#define wxID_ABOUT              5013
+#define wxID_HELP_CONTENTS      5014
+#define wxID_HELP_COMMANDS      5015
+#define wxID_HELP_PROCEDURES    5016
+#define wxID_HELP_CONTEXT       5017
+
+#define wxID_CUT                5030
+#define wxID_COPY               5031
+#define wxID_PASTE              5032
+#define wxID_CLEAR              5033
+#define wxID_FIND               5034
+#define wxID_DUPLICATE          5035
+#define wxID_SELECTALL          5036
+#define wxID_DELETE             5037
+#define wxID_REPLACE            5038
+#define wxID_REPLACE_ALL        5039
+#define wxID_PROPERTIES         5040
+
+#define wxID_VIEW_DETAILS       5041
+#define wxID_VIEW_LARGEICONS    5042
+#define wxID_VIEW_SMALLICONS    5043
+#define wxID_VIEW_LIST          5044
+#define wxID_VIEW_SORTDATE      5045
+#define wxID_VIEW_SORTNAME      5046
+#define wxID_VIEW_SORTSIZE      5047
+#define wxID_VIEW_SORTTYPE      5048
+
+#define wxID_FILE1              5050
+#define wxID_FILE2              5051
+#define wxID_FILE3              5052
+#define wxID_FILE4              5053
+#define wxID_FILE5              5054
+#define wxID_FILE6              5055
+#define wxID_FILE7              5056
+#define wxID_FILE8              5057
+#define wxID_FILE9              5058
+
+#define wxID_OK                 5100
+#define wxID_CANCEL             5101
+#define wxID_APPLY              5102
+#define wxID_YES                5103
+#define wxID_NO                 5104
+#define wxID_STATIC             5105
+
+#define wxID_HIGHEST            5999
+\end{verbatim}

 
 

-\twocolwidtha{8cm}%
-\begin{twocollist}\itemsep=0pt
-\twocolitem{\windowstyle{EVT\_CUSTOM(eventId, id, func)}}{Allows you to add a custom event table
-entry by specifying the event identifier (such as wxEVT\_SIZE), the window identifier,
-and a member function to call.}
-\twocolitem{\windowstyle{EVT\_CUSTOM\_RANGE(eventId, id1, id2, func)}}{The same as EVT\_CUSTOM,
-but responds to a range of window identifiers.}
-\twocolitem{\windowstyle{EVT\_COMMAND(eventId, id, func)}}{The same as EVT\_CUSTOM, but
-expects a member function with a wxCommandEvent argument.}
-\twocolitem{\windowstyle{EVT\_COMMAND\_RANGE(eventId, id1, id2, func)}}{The same as EVT\_CUSTOM\_RANGE, but
-expects a member function with a wxCommandEvent argument.}
-\end{twocollist}
+\subsection{Event macros summary}\label{eventmacros}

 
 \wxheading{Macros listed by event class}
 
 
 \wxheading{Macros listed by event class}
 


@@ -234,9 +371,9 @@ called via \helpref{wxWindow::Close}{wxwindowclose}.}
 \twocolitem{\helpref{wxDropFilesEvent}{wxdropfilesevent}}{The EVT\_DROP\_FILES macros handles
 file drop events.}
 \twocolitem{\helpref{wxEraseEvent}{wxeraseevent}}{The EVT\_ERASE\_BACKGROUND macro is used to handle window erase requests.}
 \twocolitem{\helpref{wxDropFilesEvent}{wxdropfilesevent}}{The EVT\_DROP\_FILES macros handles
 file drop events.}
 \twocolitem{\helpref{wxEraseEvent}{wxeraseevent}}{The EVT\_ERASE\_BACKGROUND macro is used to handle window erase requests.}

-\twocolitem{\helpref{wxFocusEvent}{wxfocusevent}}{The EVT\_SET\_FOCUS and EVT\_KILL\_FOCUS macros are used to handle keybaord focus events.}
-\twocolitem{\helpref{wxKeyEvent}{wxkeyevent}}{EVT\_CHAR and EVT\_CHAR\_HOOK macros handle keyboard
-input for any window.}
+\twocolitem{\helpref{wxFocusEvent}{wxfocusevent}}{The EVT\_SET\_FOCUS and EVT\_KILL\_FOCUS macros are used to handle keyboard focus events.}
+\twocolitem{\helpref{wxKeyEvent}{wxkeyevent}}{EVT\_CHAR, EVT\_KEY\_DOWN and
+EVT\_KEY\_UP macros handle keyboard input for any window.}

 \twocolitem{\helpref{wxIdleEvent}{wxidleevent}}{The EVT\_IDLE macro handle application idle events
 (to process background tasks, for example).}
 \twocolitem{\helpref{wxInitDialogEvent}{wxinitdialogevent}}{The EVT\_INIT\_DIALOG macro is used
 \twocolitem{\helpref{wxIdleEvent}{wxidleevent}}{The EVT\_IDLE macro handle application idle events
 (to process background tasks, for example).}
 \twocolitem{\helpref{wxInitDialogEvent}{wxinitdialogevent}}{The EVT\_INIT\_DIALOG macro is used


@@ -246,15 +383,185 @@ to handle dialog initialisation.}
 \twocolitem{\helpref{wxMouseEvent}{wxmouseevent}}{Mouse event macros can handle either individual
 mouse events or all mouse events.}
 \twocolitem{\helpref{wxMoveEvent}{wxmoveevent}}{The EVT\_MOVE macro is used to handle a window move.}
 \twocolitem{\helpref{wxMouseEvent}{wxmouseevent}}{Mouse event macros can handle either individual
 mouse events or all mouse events.}
 \twocolitem{\helpref{wxMoveEvent}{wxmoveevent}}{The EVT\_MOVE macro is used to handle a window move.}

-\twocolitem{\helpref{wxUpdateUIEvent}{wxupdateuievent}}{The EVT\_UPDATE\_UI macro is used to handle user interface
-update pseudo-events, which are generated to give the application the chance to update the visual state of menus,
-toolbars and controls.}

 \twocolitem{\helpref{wxPaintEvent}{wxpaintevent}}{The EVT\_PAINT macro is used to handle window paint requests.}
 \twocolitem{\helpref{wxPaintEvent}{wxpaintevent}}{The EVT\_PAINT macro is used to handle window paint requests.}

-\twocolitem{\helpref{wxScrollEvent}{wxscrollevent}}{These macros are used to handle scroll events from
-windows, \helpref{wxScrollBar}{wxscrollbar}, and \helpref{wxSpinButton}{wxspinbutton}.}
+\twocolitem{\helpref{wxScrollEvent}{wxscrollevent}}{These macros are used to handle scroll events from 
+\helpref{wxScrollBar}{wxscrollbar}, \helpref{wxSlider}{wxslider},and \helpref{wxSpinButton}{wxspinbutton}.}
+\twocolitem{\helpref{wxSetCursorEvent}{wxsetcursorevent}}{The EVT\_SET\_CURSOR macro is used for special cursor processing.}

 \twocolitem{\helpref{wxSizeEvent}{wxsizeevent}}{The EVT\_SIZE macro is used to handle a window resize.}
 \twocolitem{\helpref{wxSizeEvent}{wxsizeevent}}{The EVT\_SIZE macro is used to handle a window resize.}

+\twocolitem{\helpref{wxSplitterEvent}{wxsplitterevent}}{The EVT\_SPLITTER\_SASH\_POS\_CHANGED, EVT\_SPLITTER\_UNSPLIT
+and EVT\_SPLITTER\_DCLICK macros are used to handle the various splitter window events.}

 \twocolitem{\helpref{wxSysColourChangedEvent}{wxsyscolourchangedevent}}{The EVT\_SYS\_COLOUR\_CHANGED macro is used to handle
 events informing the application that the user has changed the system colours (Windows only).}
 \twocolitem{\helpref{wxTreeEvent}{wxtreeevent}}{These macros handle \helpref{wxTreeCtrl}{wxtreectrl} events.}
 \twocolitem{\helpref{wxSysColourChangedEvent}{wxsyscolourchangedevent}}{The EVT\_SYS\_COLOUR\_CHANGED macro is used to handle
 events informing the application that the user has changed the system colours (Windows only).}
 \twocolitem{\helpref{wxTreeEvent}{wxtreeevent}}{These macros handle \helpref{wxTreeCtrl}{wxtreectrl} events.}

+\twocolitem{\helpref{wxUpdateUIEvent}{wxupdateuievent}}{The EVT\_UPDATE\_UI macro is used to handle user interface
+update pseudo-events, which are generated to give the application the chance to update the visual state of menus,
+toolbars and controls.}
+\end{twocollist}
+
+\subsection{Custom event summary}\label{customevents}
+
+\wxheading{General approach}
+
+Since version 2.2.x of wxWidgets, each event type is identified by ID which
+is given to the event type {\it at runtime} which makes it possible to add
+new event types to the library or application without risking ID clashes
+(two different event types mistakingly getting the same event ID). This
+event type ID is stored in a struct of type {\bf const wxEventType}.
+
+In order to define a new event type, there are principally two choices.
+One is to define a entirely new event class (typically deriving from
+\helpref{wxEvent}{wxevent} or \helpref{wxCommandEvent}{wxcommandevent}. 
+The other is to use the existing event classes and give them an new event
+type. You'll have to define and declare a new event type using either way,
+and this is done using the following macros:
+
+\begin{verbatim}
+// in the header of the source file
+DECLARE_EVENT_TYPE(name, value)
+
+// in the implementation
+DEFINE_EVENT_TYPE(name)
+\end{verbatim}
+
+You can ignore the {\it value} parameter of the DECLARE\_EVENT\_TYPE macro
+since it used only for backwards compatibility with wxWidgets 2.0.x based
+applications where you have to give the event type ID an explicit value.
+
+\wxheading{Using existing event classes}
+
+If you just want to use a \helpref{wxCommandEvent}{wxcommandevent} with
+a new event type, you can then use one of the generic event table macros
+listed below, without having to define a new macro yourself. This also
+has the advantage that you won't have to define a new \helpref{wxEvent::Clone()}{wxeventclone}
+method for posting events between threads etc. This could look like this
+in your code:
+
+{\small%
+\begin{verbatim}
+DECLARE_EVENT_TYPE(wxEVT_MY_EVENT, -1)
+
+DEFINE_EVENT_TYPE(wxEVT_MY_EVENT)
+
+// user code intercepting the event
+
+BEGIN_EVENT_TABLE(MyFrame, wxFrame)
+  EVT_MENU    (wxID_EXIT, MyFrame::OnExit)
+  // ....
+  EVT_COMMAND  (ID_MY_WINDOW, wxEVT_MY_EVENT, MyFrame::OnMyEvent)
+END_EVENT_TABLE()
+
+void MyFrame::OnMyEvent( wxCommandEvent &event )
+{
+    // do something
+    wxString text = event.GetText();
+}
+
+
+// user code sending the event
+
+void MyWindow::SendEvent()
+{
+    wxCommandEvent event( wxEVT_MY_EVENT, GetId() );
+    event.SetEventObject( this );
+    // Give it some contents
+    event.SetText( wxT("Hallo") );
+    // Send it
+    GetEventHandler()->ProcessEvent( event );
+}
+\end{verbatim}
+}%
+
+
+\wxheading{Generic event table macros}
+
+\twocolwidtha{8cm}%
+\begin{twocollist}\itemsep=0pt
+\twocolitem{\windowstyle{EVT\_CUSTOM(event, id, func)}}{Allows you to add a custom event table
+entry by specifying the event identifier (such as wxEVT\_SIZE), the window identifier,
+and a member function to call.}
+\twocolitem{\windowstyle{EVT\_CUSTOM\_RANGE(event, id1, id2, func)}}{The same as EVT\_CUSTOM,
+but responds to a range of window identifiers.}
+\twocolitem{\windowstyle{EVT\_COMMAND(id, event, func)}}{The same as EVT\_CUSTOM, but
+expects a member function with a wxCommandEvent argument.}
+\twocolitem{\windowstyle{EVT\_COMMAND\_RANGE(id1, id2, event, func)}}{The same as EVT\_CUSTOM\_RANGE, but
+expects a member function with a wxCommandEvent argument.}
+\twocolitem{\windowstyle{EVT\_NOTIFY(id, event, func)}}{The same as EVT\_CUSTOM, but
+expects a member function with a wxNotifyEvent argument.}
+\twocolitem{\windowstyle{EVT\_NOTIFY\_RANGE(id1, id2, event, func)}}{The same as EVT\_CUSTOM\_RANGE, but
+expects a member function with a wxNotifyEvent argument.}

 \end{twocollist}
 
 \end{twocollist}
 

+
+\wxheading{Defining your own event class}
+
+Under certain circumstances, it will be required to define your own event
+class e.g. for sending more complex data from one place to another. Apart
+from defining your event class, you will also need to define your own
+event table macro (which is quite long). Watch out to put in enough
+casts to the inherited event function. Here is an example, taken mostly
+from the {\it wxPlot} library, which is in the {\it contrib} section of
+the wxWidgets sources.
+
+{\small%
+\begin{verbatim}
+
+// code defining event
+
+class wxPlotEvent: public wxNotifyEvent
+{
+public:
+    wxPlotEvent( wxEventType commandType = wxEVT_NULL, int id = 0 );
+
+    // accessors
+    wxPlotCurve *GetCurve()
+        { return m_curve; }
+
+    // required for sending with wxPostEvent()
+    wxEvent* Clone();
+
+private:
+    wxPlotCurve   *m_curve;
+};
+
+DECLARE_EVENT_MACRO( wxEVT_PLOT_ACTION, -1 )
+
+typedef void (wxEvtHandler::*wxPlotEventFunction)(wxPlotEvent&);
+
+#define EVT_PLOT(id, fn) \
+    DECLARE_EVENT_TABLE_ENTRY( wxEVT_PLOT_ACTION, id, -1, \
+    (wxObjectEventFunction) (wxEventFunction) (wxCommandEventFunction) (wxNotifyEventFunction) \
+    wxStaticCastEvent( wxPlotEventFunction, & fn ), (wxObject *) NULL ),
+
+
+// code implementing the event type and the event class
+
+DEFINE_EVENT_TYPE( wxEVT_PLOT_ACTION )
+
+wxPlotEvent::wxPlotEvent( ...
+
+
+// user code intercepting the event
+
+BEGIN_EVENT_TABLE(MyFrame, wxFrame)
+  EVT_PLOT  (ID_MY_WINDOW,  MyFrame::OnPlot)
+END_EVENT_TABLE()
+
+void MyFrame::OnPlot( wxPlotEvent &event )
+{
+    wxPlotCurve *curve = event.GetCurve();
+}
+
+
+// user code sending the event
+
+void MyWindow::SendEvent()
+{
+    wxPlotEvent event( wxEVT_PLOT_ACTION, GetId() );
+    event.SetEventObject( this );
+    event.SetCurve( m_curve );
+    GetEventHandler()->ProcessEvent( event );
+}
+
+\end{verbatim}
+}%
+