+dnl on some platforms xxx_r() functions are declared inside "#ifdef
+dnl _REENTRANT" and it's easier to just define this symbol for these platforms
+dnl than checking it during run-time
+NEEDS_D_REENTRANT_FOR_R_FUNCS=0
+
+dnl the list of all available toolkits
+dnl
+dnl update NUM_TOOLKITS calculation below when adding a new toolkit here!
+ALL_TOOLKITS="CYGWIN GTK MAC MGL MINGW MOTIF PM WINE"
+
+dnl NB: these wxUSE_XXX constants have value of 0 or 1 unlike all the other ones
+dnl which are either yes or no
+DEFAULT_wxUSE_GTK=0
+DEFAULT_wxUSE_MAC=0
+DEFAULT_wxUSE_MGL=0
+DEFAULT_wxUSE_MOTIF=0
+DEFAULT_wxUSE_MSW=0
+DEFAULT_wxUSE_PM=0
+DEFAULT_wxUSE_WINE=0
+
+dnl these are the values which are really default for the given platform -
+dnl they're not cached and are only used if no --with-toolkit was given *and*
+dnl nothing was found in the cache
+DEFAULT_DEFAULT_wxUSE_GTK=0
+DEFAULT_DEFAULT_wxUSE_MAC=0
+DEFAULT_DEFAULT_wxUSE_MGL=0
+DEFAULT_DEFAULT_wxUSE_MOTIF=0
+DEFAULT_DEFAULT_wxUSE_MSW=0
+DEFAULT_DEFAULT_wxUSE_PM=0
+DEFAULT_DEFAULT_wxUSE_WINE=0
+
+PROGRAM_EXT=
+
+dnl to support a new system, you need to add its canonical name (as determined
+dnl by config.sub or specified by the configure command line) to this "case"
+dnl and also define the shared library flags below - search for
+dnl SHARED_LIB_SETUP to find the exact place
+case "${host}" in
+ *-hp-hpux* )
+ USE_HPUX=1
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ NEEDS_D_REENTRANT_FOR_R_FUNCS=1
+ AC_DEFINE(__HPUX__)
+ ;;
+ *-*-linux* )
+ USE_LINUX=1
+ AC_DEFINE(__LINUX__)
+ TMP=`uname -m`
+ if test "x$TMP" = "xalpha"; then
+ USE_ALPHA=1
+ AC_DEFINE(__ALPHA__)
+ fi
+ DEFAULT_DEFAULT_wxUSE_GTK=1
+ ;;
+ *-*-irix5* | *-*-irix6* )
+ USE_SGI=1
+ USE_SVR4=1
+ AC_DEFINE(__SGI__)
+ AC_DEFINE(__SVR4__)
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ ;;
+ *-*-solaris2* )
+ USE_SUN=1
+ USE_SOLARIS=1
+ USE_SVR4=1
+ AC_DEFINE(__SUN__)
+ AC_DEFINE(__SOLARIS__)
+ AC_DEFINE(__SVR4__)
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ NEEDS_D_REENTRANT_FOR_R_FUNCS=1
+ ;;
+ *-*-sunos4* )
+ USE_SUN=1
+ USE_SUNOS=1
+ USE_BSD=1
+ AC_DEFINE(__SUN__)
+ AC_DEFINE(__SUNOS__)
+ AC_DEFINE(__BSD__)
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ ;;
+ *-*-freebsd*)
+ USE_BSD=1
+ USE_FREEBSD=1
+ AC_DEFINE(__FREEBSD__)
+ AC_DEFINE(__BSD__)
+ DEFAULT_DEFAULT_wxUSE_GTK=1
+ ;;
+ *-*-openbsd*)
+ USE_BSD=1
+ USE_OPENBSD=1
+ AC_DEFINE(__FREEBSD__)
+ AC_DEFINE(__OPENBSD__)
+ DEFAULT_DEFAULT_wxUSE_GTK=1
+ ;;
+ *-*-netbsd*)
+ USE_BSD=1
+ USE_NETBSD=1
+ AC_DEFINE(__FREEBSD__)
+ AC_DEFINE(__NETBSD__)
+ DEFAULT_DEFAULT_wxUSE_GTK=1
+ ;;
+ *-*-osf* )
+ USE_ALPHA=1
+ USE_OSF=1
+ AC_DEFINE(__ALPHA__)
+ AC_DEFINE(__OSF__)
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ NEEDS_D_REENTRANT_FOR_R_FUNCS=1
+ ;;
+ *-*-dgux5* )
+ USE_ALPHA=1
+ USE_SVR4=1
+ AC_DEFINE(__ALPHA__)
+ AC_DEFINE(__SVR4__)
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ ;;
+ *-*-sysv5* )
+ USE_SYSV=1
+ USE_SVR4=1
+ AC_DEFINE(__SYSV__)
+ AC_DEFINE(__SVR4__)
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ ;;
+ *-*-aix* )
+ USE_AIX=1
+ USE_SYSV=1
+ USE_SVR4=1
+ AC_DEFINE(__AIX__)
+ AC_DEFINE(__SYSV__)
+ AC_DEFINE(__SVR4__)
+ DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ ;;
+
+ *-*-cygwin* | *-*-mingw32* )
+ USE_UNIX=0
+ USE_WIN32=1
+ AC_DEFINE(__WIN32__)
+ AC_DEFINE(__WIN95__)
+ AC_DEFINE(__WINDOWS__)
+ AC_DEFINE(__GNUWIN32__)
+ AC_DEFINE(STRICT)
+ AC_DEFINE(WINVER, 0x0400)
+ PROGRAM_EXT=".exe"
+ DEFAULT_DEFAULT_wxUSE_MSW=1
+ ;;
+
+ *-pc-os2_emx )
+ AC_DEFINE(__EMX__)
+ PROGRAM_EXT=".exe"
+ DEFAULT_DEFAULT_wxUSE_PM=1
+ ;;
+
+ *-*-darwin* )
+ USE_BSD=1
+ USE_DARWIN=1
+ AC_DEFINE(__BSD__)
+ AC_DEFINE(__DARWIN__)
+ AC_DEFINE(__UNIX__)
+ DEFAULT_DEFAULT_wxUSE_MAC=1
+ ;;
+
+ *-*-beos* )
+ dnl leave USE_UNIX on - BeOS is sufficiently Unix-like for this
+ USE_BEOS=1
+ AC_DEFINE(__BEOS__)
+ ;;
+
+ *)
+ AC_MSG_ERROR(unknown system type ${host}.)
+esac
+
+if test "$USE_UNIX" = 1 ; then
+ wxUSE_UNIX=yes
+ AC_DEFINE(__UNIX__)
+
+ SRC_SUBDIRS="$SRC_SUBDIRS unix"
+ INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS unix"
+fi
+
+if test "$USE_BEOS" = 1; then
+ SRC_SUBDIRS="$SRC_SUBDIRS be"
+ INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS be"
+fi
+
+dnl Linux: test for libc5/glibc2: glibc2 has gettext() included
+if test "$USE_LINUX" = 1; then
+ AC_CHECK_LIB(c,gettext,AC_DEFINE(wxHAVE_GLIBC2))
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl command line options for configure
+dnl ---------------------------------------------------------------------------
+
+dnl the default values for all options - we collect them all here to simplify
+dnl modification of the default values (for example, if the defaults for some
+dnl platform should be changed, it can be done here too)
+dnl
+dnl NB: see also DEFAULT_wxUSE<toolkit> variables defined above
+
+WX_ARG_CACHE_INIT
+
+dnl useful to test the compilation with minimum options, define as 0 for normal
+dnl usage
+DEBUG_CONFIGURE=0
+if test $DEBUG_CONFIGURE = 1; then
+ DEFAULT_wxUSE_UNIVERSAL=no
+
+ DEFAULT_wxUSE_THREADS=yes
+
+ DEFAULT_wxUSE_SHARED=yes
+ DEFAULT_wxUSE_BURNT_NAME=no
+ DEFAULT_wxUSE_OPTIMISE=no
+ DEFAULT_wxUSE_PROFILE=no
+ DEFAULT_wxUSE_NO_DEPS=no
+ DEFAULT_wxUSE_NO_RTTI=no
+ DEFAULT_wxUSE_NO_EXCEPTIONS=no
+ DEFAULT_wxUSE_PERMISSIVE=no
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=yes
+ DEFAULT_wxUSE_DEBUG_GDB=yes
+ DEFAULT_wxUSE_MEM_TRACING=no
+ DEFAULT_wxUSE_DEBUG_CONTEXT=no
+ DEFAULT_wxUSE_DMALLOC=no
+ DEFAULT_wxUSE_APPLE_IEEE=no
+
+ DEFAULT_wxUSE_LOG=yes
+ DEFAULT_wxUSE_LOGWINDOW=no
+ DEFAULT_wxUSE_LOGGUI=no
+
+ DEFAULT_wxUSE_GUI=yes
+ DEFAULT_wxUSE_CONTROLS=no
+
+ DEFAULT_wxUSE_REGEX=no
+ DEFAULT_wxUSE_ZLIB=no
+ DEFAULT_wxUSE_LIBPNG=no
+ DEFAULT_wxUSE_LIBJPEG=no
+ DEFAULT_wxUSE_LIBTIFF=no
+ DEFAULT_wxUSE_ODBC=no
+ DEFAULT_wxUSE_FREETYPE=no
+ DEFAULT_wxUSE_OPENGL=no
+
+ DEFAULT_wxUSE_ON_FATAL_EXCEPTION=no
+ DEFAULT_wxUSE_SNGLINST_CHECKER=no
+ DEFAULT_wxUSE_STD_IOSTREAM=no
+ DEFAULT_wxUSE_CMDLINE_PARSER=no
+ DEFAULT_wxUSE_DATETIME=no
+ DEFAULT_wxUSE_TIMEDATE=no
+ DEFAULT_wxUSE_TIMER=no
+ DEFAULT_wxUSE_STOPWATCH=no
+ DEFAULT_wxUSE_FILE=no
+ DEFAULT_wxUSE_FFILE=no
+ DEFAULT_wxUSE_TEXTFILE=no
+ DEFAULT_wxUSE_WAVE=no
+ DEFAULT_wxUSE_INTL=no
+ DEFAULT_wxUSE_CONFIG=no
+ DEFAULT_wxUSE_FONTMAP=no
+ DEFAULT_wxUSE_STREAMS=no
+ DEFAULT_wxUSE_SOCKETS=no
+ DEFAULT_wxUSE_DIALUP_MANAGER=no
+ DEFAULT_wxUSE_SERIAL=no
+ DEFAULT_wxUSE_JOYSTICK=no
+ DEFAULT_wxUSE_DYNLIB_CLASS=no
+ DEFAULT_wxUSE_LONGLONG=no
+ DEFAULT_wxUSE_GEOMETRY=no
+
+ DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=no
+ DEFAULT_wxUSE_NORMALIZED_PS_FONTS=no
+ DEFAULT_wxUSE_POSTSCRIPT=no
+
+ DEFAULT_wxUSE_X_RESOURCES=no
+ DEFAULT_wxUSE_CLIPBOARD=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_DRAG_AND_DROP=no
+ DEFAULT_wxUSE_DRAGIMAGE=no
+ DEFAULT_wxUSE_SPLINES=no
+
+ DEFAULT_wxUSE_MDI_ARCHITECTURE=no
+ DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE=no
+ DEFAULT_wxUSE_PRINTING_ARCHITECTURE=no
+
+ DEFAULT_wxUSE_PROLOGIO=no
+ DEFAULT_wxUSE_RESOURCES=no
+ DEFAULT_wxUSE_CONSTRAINTS=no
+ DEFAULT_wxUSE_IPC=no
+ DEFAULT_wxUSE_HELP=no
+ DEFAULT_wxUSE_MS_HTML_HELP=no
+ DEFAULT_wxUSE_WXHTML_HELP=no
+ DEFAULT_wxUSE_TREELAYOUT=no
+ DEFAULT_wxUSE_METAFILE=no
+ DEFAULT_wxUSE_MIMETYPE=no
+ DEFAULT_wxUSE_SYSTEM_OPTIONS=yes
+
+ DEFAULT_wxUSE_COMMONDLGS=no
+ DEFAULT_wxUSE_CHOICEDLG=no
+ DEFAULT_wxUSE_COLOURDLG=no
+ DEFAULT_wxUSE_DIRDLG=no
+ DEFAULT_wxUSE_FILEDLG=no
+ DEFAULT_wxUSE_FONTDLG=no
+ DEFAULT_wxUSE_MSGDLG=no
+ DEFAULT_wxUSE_NUMBERDLG=no
+ DEFAULT_wxUSE_TEXTDLG=no
+ DEFAULT_wxUSE_STARTUP_TIPS=no
+ DEFAULT_wxUSE_PROGRESSDLG=no
+ DEFAULT_wxUSE_WIZARDDLG=no
+
+ DEFAULT_wxUSE_MENUS=no
+ DEFAULT_wxUSE_MINIFRAME=no
+ DEFAULT_wxUSE_HTML=no
+ DEFAULT_wxUSE_FILESYSTEM=no
+ DEFAULT_wxUSE_FS_INET=no
+ DEFAULT_wxUSE_FS_ZIP=no
+ DEFAULT_wxUSE_BUSYINFO=no
+ DEFAULT_wxUSE_ZIPSTREAM=no
+ DEFAULT_wxUSE_VALIDATORS=no
+
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_BUTTON=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLST=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_PROPSHEET=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPINCTRL=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATTEXT=no
+ DEFAULT_wxUSE_STATUSBAR=yes
+ DEFAULT_wxUSE_TABDIALOG=no
+ DEFAULT_wxUSE_TEXTCTRL=no
+ DEFAULT_wxUSE_TOGGLEBTN=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=no
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
+ DEFAULT_wxUSE_TREECTRL=no
+ DEFAULT_wxUSE_POPUPWIN=no
+
+ DEFAULT_wxUSE_UNICODE=no
+ DEFAULT_wxUSE_WCSRTOMBS=no
+
+ DEFAULT_wxUSE_IMAGE=no
+ DEFAULT_wxUSE_GIF=no
+ DEFAULT_wxUSE_PCX=no
+ DEFAULT_wxUSE_PNM=no
+ DEFAULT_wxUSE_XPM=no
+else
+ DEFAULT_wxUSE_UNIVERSAL=no
+
+ DEFAULT_wxUSE_THREADS=yes
+
+ DEFAULT_wxUSE_SHARED=yes
+ DEFAULT_wxUSE_BURNT_NAME=no
+ DEFAULT_wxUSE_OPTIMISE=yes
+ DEFAULT_wxUSE_PROFILE=no
+ DEFAULT_wxUSE_NO_DEPS=no
+ DEFAULT_wxUSE_NO_RTTI=no
+ DEFAULT_wxUSE_NO_EXCEPTIONS=no
+ DEFAULT_wxUSE_PERMISSIVE=no
+ DEFAULT_wxUSE_DEBUG_FLAG=no
+ DEFAULT_wxUSE_DEBUG_INFO=no
+ DEFAULT_wxUSE_DEBUG_GDB=no
+ DEFAULT_wxUSE_MEM_TRACING=no
+ DEFAULT_wxUSE_DEBUG_CONTEXT=no
+ DEFAULT_wxUSE_DMALLOC=no
+ DEFAULT_wxUSE_APPLE_IEEE=yes
+
+ DEFAULT_wxUSE_LOG=yes
+ DEFAULT_wxUSE_LOGWINDOW=yes
+ DEFAULT_wxUSE_LOGGUI=yes
+
+ DEFAULT_wxUSE_GUI=yes
+
+ DEFAULT_wxUSE_REGEX=yes
+ DEFAULT_wxUSE_ZLIB=yes
+ DEFAULT_wxUSE_LIBPNG=yes
+ DEFAULT_wxUSE_LIBJPEG=yes
+ DEFAULT_wxUSE_LIBTIFF=yes
+ DEFAULT_wxUSE_ODBC=no
+ DEFAULT_wxUSE_FREETYPE=no
+ DEFAULT_wxUSE_OPENGL=no
+
+ DEFAULT_wxUSE_ON_FATAL_EXCEPTION=yes
+ DEFAULT_wxUSE_SNGLINST_CHECKER=yes
+ DEFAULT_wxUSE_STD_IOSTREAM=no
+ DEFAULT_wxUSE_CMDLINE_PARSER=yes
+ DEFAULT_wxUSE_DATETIME=yes
+ DEFAULT_wxUSE_TIMEDATE=no
+ DEFAULT_wxUSE_TIMER=yes
+ DEFAULT_wxUSE_STOPWATCH=yes
+ DEFAULT_wxUSE_FILE=yes
+ DEFAULT_wxUSE_FFILE=yes
+ DEFAULT_wxUSE_TEXTFILE=yes
+ DEFAULT_wxUSE_WAVE=no
+ DEFAULT_wxUSE_INTL=yes
+ DEFAULT_wxUSE_CONFIG=yes
+ DEFAULT_wxUSE_FONTMAP=yes
+ DEFAULT_wxUSE_STREAMS=yes
+ DEFAULT_wxUSE_SOCKETS=yes
+ DEFAULT_wxUSE_DIALUP_MANAGER=yes
+ DEFAULT_wxUSE_SERIAL=yes
+ DEFAULT_wxUSE_JOYSTICK=yes
+ DEFAULT_wxUSE_DYNLIB_CLASS=yes
+ DEFAULT_wxUSE_LONGLONG=yes
+ DEFAULT_wxUSE_GEOMETRY=yes
+
+ DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=yes
+ DEFAULT_wxUSE_NORMALIZED_PS_FONTS=yes
+ DEFAULT_wxUSE_POSTSCRIPT=yes
+
+ DEFAULT_wxUSE_X_RESOURCES=no
+ DEFAULT_wxUSE_CLIPBOARD=yes
+ DEFAULT_wxUSE_TOOLTIPS=yes
+ DEFAULT_wxUSE_DRAG_AND_DROP=yes
+ DEFAULT_wxUSE_DRAGIMAGE=yes
+ DEFAULT_wxUSE_SPLINES=yes
+
+ DEFAULT_wxUSE_MDI_ARCHITECTURE=yes
+ DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE=yes
+ DEFAULT_wxUSE_PRINTING_ARCHITECTURE=yes
+
+ DEFAULT_wxUSE_PROLOGIO=yes
+ DEFAULT_wxUSE_RESOURCES=yes
+ DEFAULT_wxUSE_CONSTRAINTS=yes
+ DEFAULT_wxUSE_IPC=yes
+ DEFAULT_wxUSE_HELP=yes
+ DEFAULT_wxUSE_MS_HTML_HELP=yes
+ DEFAULT_wxUSE_WXHTML_HELP=yes
+ DEFAULT_wxUSE_TREELAYOUT=yes
+ DEFAULT_wxUSE_METAFILE=yes
+ DEFAULT_wxUSE_MIMETYPE=yes
+ DEFAULT_wxUSE_SYSTEM_OPTIONS=yes
+
+ DEFAULT_wxUSE_COMMONDLGS=yes
+ DEFAULT_wxUSE_CHOICEDLG=yes
+ DEFAULT_wxUSE_COLOURDLG=yes
+ DEFAULT_wxUSE_DIRDLG=yes
+ DEFAULT_wxUSE_FILEDLG=yes
+ DEFAULT_wxUSE_FONTDLG=yes
+ DEFAULT_wxUSE_MSGDLG=yes
+ DEFAULT_wxUSE_NUMBERDLG=yes
+ DEFAULT_wxUSE_TEXTDLG=yes
+ DEFAULT_wxUSE_STARTUP_TIPS=yes
+ DEFAULT_wxUSE_PROGRESSDLG=yes
+ DEFAULT_wxUSE_WIZARDDLG=yes
+
+ DEFAULT_wxUSE_MENUS=yes
+ DEFAULT_wxUSE_MINIFRAME=yes
+ DEFAULT_wxUSE_HTML=yes
+ DEFAULT_wxUSE_FILESYSTEM=yes
+ DEFAULT_wxUSE_FS_INET=yes
+ DEFAULT_wxUSE_FS_ZIP=yes
+ DEFAULT_wxUSE_BUSYINFO=yes
+ DEFAULT_wxUSE_ZIPSTREAM=yes
+ DEFAULT_wxUSE_VALIDATORS=yes
+
+ DEFAULT_wxUSE_ACCEL=yes
+ DEFAULT_wxUSE_BUTTON=yes
+ DEFAULT_wxUSE_BMPBUTTON=yes
+ DEFAULT_wxUSE_CALCTRL=yes
+ DEFAULT_wxUSE_CARET=yes
+ DEFAULT_wxUSE_CHECKBOX=yes
+ DEFAULT_wxUSE_CHECKLST=yes
+ DEFAULT_wxUSE_CHOICE=yes
+ DEFAULT_wxUSE_COMBOBOX=yes
+ DEFAULT_wxUSE_GAUGE=yes
+ DEFAULT_wxUSE_GRID=yes
+ DEFAULT_wxUSE_NEW_GRID=yes
+ DEFAULT_wxUSE_IMAGLIST=yes
+ DEFAULT_wxUSE_LISTBOX=yes
+ DEFAULT_wxUSE_LISTCTRL=yes
+ DEFAULT_wxUSE_NOTEBOOK=yes
+ DEFAULT_wxUSE_PROPSHEET=yes
+ DEFAULT_wxUSE_RADIOBOX=yes
+ DEFAULT_wxUSE_RADIOBTN=yes
+ DEFAULT_wxUSE_SASH=yes
+ DEFAULT_wxUSE_SCROLLBAR=yes
+ DEFAULT_wxUSE_SLIDER=yes
+ DEFAULT_wxUSE_SPINBTN=yes
+ DEFAULT_wxUSE_SPINCTRL=yes
+ DEFAULT_wxUSE_SPLITTER=yes
+ DEFAULT_wxUSE_STATBMP=yes
+ DEFAULT_wxUSE_STATBOX=yes
+ DEFAULT_wxUSE_STATLINE=yes
+ DEFAULT_wxUSE_STATTEXT=yes
+ DEFAULT_wxUSE_STATUSBAR=yes
+ DEFAULT_wxUSE_TABDIALOG=no
+ DEFAULT_wxUSE_TEXTCTRL=yes
+ DEFAULT_wxUSE_TOGGLEBTN=yes
+ DEFAULT_wxUSE_TOOLBAR=yes
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
+ DEFAULT_wxUSE_TREECTRL=yes
+ DEFAULT_wxUSE_POPUPWIN=yes
+
+ DEFAULT_wxUSE_UNICODE=no
+ DEFAULT_wxUSE_WCSRTOMBS=no
+
+ DEFAULT_wxUSE_IMAGE=yes
+ DEFAULT_wxUSE_GIF=yes
+ DEFAULT_wxUSE_PCX=yes
+ DEFAULT_wxUSE_PNM=yes
+ DEFAULT_wxUSE_XPM=yes
+fi
+
+dnl WX_ARG_WITH should be used to select whether an external package will be
+dnl used or not, to configure compile-time features of this package itself,
+dnl use WX_ARG_ENABLE instead
+
+dnl ============================
+dnl external package dependecies
+dnl ============================
+
+dnl these options use AC_ARG_WITH and not WX_ARG_WITH on purpose - we cache
+dnl these values manually
+for toolkit in `echo $ALL_TOOLKITS`; do
+ LINE=`grep "wxUSE_$toolkit" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ has_toolkit_in_cache=1
+ eval "DEFAULT_$LINE"
+ eval "CACHE_$toolkit=1"
+ fi
+done
+
+dnl ---------------------------------------------------------------------------
+dnl --disable-gui will build only non-GUI part of wxWindows: check for this
+dnl first to disable many other switches if it's given
+dnl
+dnl NB: this is still in testing stage, don't use if you don't know what you're
+dnl doing
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(gui, [ --enable-gui use GUI classes], wxUSE_GUI)
+
+if test "$wxUSE_GUI" = "yes"; then
+
+WX_ARG_ENABLE(universal, [ --enable-universal use wxWindows GUI controls instead of native ones], wxUSE_UNIVERSAL)
+AC_ARG_WITH(gtk, [ --with-gtk use GTK+], [wxUSE_GTK="$withval" CACHE_GTK=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(motif, [ --with-motif use Motif/Lesstif], [wxUSE_MOTIF="$withval" CACHE_MOTIF=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(mac, [ --with-mac use Mac OS X], [wxUSE_MAC="$withval" TOOLKIT_GIVEN=1])
+AC_ARG_WITH(wine, [ --with-wine use WINE], [wxUSE_WINE="$withval" CACHE_WINE=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(cygwin, [ --with-cygwin use Cygwin for MS-Windows], [wxUSE_CYGWIN="$withval" CACHE_CYGWIN=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(mingw, [ --with-mingw use GCC Minimal MS-Windows], [wxUSE_MINGW="$withval" CACHE_MINGW=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(pm, [ --with-pm use OS/2 Presentation Manager], [wxUSE_PM="$withval" CACHE_PM=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(mgl, [ --with-mgl use MGL], [wxUSE_MGL="$withval" CACHE_MGL=1 TOOLKIT_GIVEN=1])
+
+AC_ARG_ENABLE(gtk2, [ --enable-gtk2 use GTK+ 2.0 if available (EXPERIMENTAL)],wxUSE_GTK2=1,wxUSE_GTK2=0)
+
+WX_ARG_SYS_WITH(libpng, [ --with-libpng use libpng (PNG image format)], wxUSE_LIBPNG)
+WX_ARG_SYS_WITH(libjpeg, [ --with-libjpeg use libjpeg (JPEG file format)], wxUSE_LIBJPEG)
+WX_ARG_SYS_WITH(libtiff, [ --with-libtiff use libtiff (TIFF file format)], wxUSE_LIBTIFF)
+WX_ARG_SYS_WITH(freetype, [ --with-freetype use freetype (font rasterizer)], wxUSE_FREETYPE)
+WX_ARG_WITH(opengl, [ --with-opengl use OpenGL (or Mesa)], wxUSE_OPENGL)
+
+fi
+dnl for GUI only
+
+WX_ARG_WITH(dmalloc, [ --with-dmalloc use dmalloc library (www.letters.com/dmalloc)], wxUSE_DMALLOC)
+WX_ARG_SYS_WITH(regex, [ --with-regex enable support for wxRegEx class], wxUSE_REGEX)
+WX_ARG_SYS_WITH(zlib, [ --with-zlib use zlib for LZW compression], wxUSE_ZLIB)
+WX_ARG_WITH(odbc, [ --with-odbc use the IODBC and wxODBC classes], wxUSE_ODBC)
+
+dnl ====================
+dnl compile-time options
+dnl ====================
+
+dnl ---------------------------------------------------------------------------
+dnl compile options
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(shared, [ --enable-shared create shared library code], wxUSE_SHARED)
+WX_ARG_ENABLE(burnt_name, [ --enable-burnt_name create set name in shared library ], wxUSE_BURNT_NAME)
+WX_ARG_ENABLE(optimise, [ --enable-optimise create optimised code], wxUSE_OPTIMISE)
+WX_ARG_ENABLE(debug, [ --enable-debug same as debug_flag and debug_info], wxUSE_DEBUG)
+
+if test "$wxUSE_DEBUG" = "yes"; then
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=yes
+elif test "$wxUSE_DEBUG" = "no"; then
+ DEFAULT_wxUSE_DEBUG_FLAG=no
+ DEFAULT_wxUSE_DEBUG_INFO=no
+fi
+
+WX_ARG_ENABLE(debug_flag, [ --enable-debug_flag set __WXDEBUG__ flag (recommended for developers!)], wxUSE_DEBUG_FLAG)
+WX_ARG_ENABLE(debug_info, [ --enable-debug_info create code with debugging information], wxUSE_DEBUG_INFO)
+WX_ARG_ENABLE(debug_gdb, [ --enable-debug_gdb create code with extra GDB debugging information], wxUSE_DEBUG_GDB)
+WX_ARG_ENABLE(debug_cntxt, [ --enable-debug_cntxt use wxDebugContext], wxUSE_DEBUG_CONTEXT)
+WX_ARG_ENABLE(mem_tracing, [ --enable-mem_tracing create code with memory tracing], wxUSE_MEM_TRACING)
+WX_ARG_ENABLE(profile, [ --enable-profile create code with profiling information], wxUSE_PROFILE)
+WX_ARG_ENABLE(no_rtti, [ --enable-no_rtti create code without RTTI information], wxUSE_NO_RTTI)
+WX_ARG_ENABLE(no_exceptions, [ --enable-no_exceptions create code without exceptions information], wxUSE_NO_EXCEPTIONS)
+WX_ARG_ENABLE(permissive, [ --enable-permissive compile code disregarding strict ANSI], wxUSE_PERMISSIVE)
+WX_ARG_ENABLE(no_deps, [ --enable-no_deps create code without dependency information], wxUSE_NO_DEPS)
+
+WX_ARG_ENABLE(compat20, [ --enable-compat20 enable wxWin 2.0 compatibility], WXWIN_COMPATIBILITY_2)
+WX_ARG_ENABLE(compat22, [ --enable-compat22 enable wxWin 2.2 compatibility], WXWIN_COMPATIBILITY_2_2)
+
+dnl ---------------------------------------------------------------------------
+dnl (small) optional non GUI classes
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(intl, [ --enable-intl use internationalization system], wxUSE_INTL)
+WX_ARG_ENABLE(config, [ --enable-config use wxConfig (and derived) classes], wxUSE_CONFIG)
+
+WX_ARG_ENABLE(sockets, [ --enable-sockets use socket/network classes], wxUSE_SOCKETS)
+
+WX_ARG_ENABLE(ipc, [ --enable-ipc use interprocess communication (wxSocket etc.)], wxUSE_IPC)
+
+WX_ARG_ENABLE(cmdline, [ --enable-cmdline use wxCmdLineParser class], wxUSE_CMDLINE_PARSER)
+WX_ARG_ENABLE(datetime, [ --enable-datetime use wxDateTime class], wxUSE_DATETIME)
+WX_ARG_ENABLE(timedate, [ --enable-timedate use obsolete wxDate/wxTime classes], wxUSE_TIMEDATE)
+WX_ARG_ENABLE(stopwatch, [ --enable-stopwatch use wxStopWatch class], wxUSE_STOPWATCH)
+WX_ARG_ENABLE(dialupman, [ --enable-dialupman use dialup network classes], wxUSE_DIALUP_MANAGER)
+WX_ARG_ENABLE(apple_ieee, [ --enable-apple_ieee use the Apple IEEE codec], wxUSE_APPLE_IEEE)
+WX_ARG_ENABLE(timer, [ --enable-timer use wxTimer class], wxUSE_TIMER)
+WX_ARG_ENABLE(wave, [ --enable-wave use wxWave class], wxUSE_WAVE)
+WX_ARG_ENABLE(fraction, [ --enable-fraction use wxFraction class], wxUSE_FRACTION)
+WX_ARG_ENABLE(dynlib, [ --enable-dynlib use wxLibrary class for DLL loading], wxUSE_DYNLIB_CLASS)
+WX_ARG_ENABLE(longlong, [ --enable-longlong use wxLongLong class], wxUSE_LONGLONG)
+WX_ARG_ENABLE(geometry, [ --enable-geometry use geometry class], wxUSE_GEOMETRY)
+WX_ARG_ENABLE(log, [ --enable-log use logging system], wxUSE_LOG)
+WX_ARG_ENABLE(streams, [ --enable-streams use wxStream etc classes], wxUSE_STREAMS)
+WX_ARG_ENABLE(file, [ --enable-file use wxFile classes], wxUSE_FILE)
+WX_ARG_ENABLE(ffile, [ --enable-ffile use wxFFile classes], wxUSE_FFILE)
+WX_ARG_ENABLE(textfile, [ --enable-textfile use wxTextFile classes], wxUSE_TEXTFILE)
+WX_ARG_ENABLE(fontmap, [ --enable-fontmap use font encodings conversion classes], wxUSE_FONTMAP)
+WX_ARG_ENABLE(unicode, [ --enable-unicode compile wxString with Unicode support], wxUSE_UNICODE)
+WX_ARG_ENABLE(wcsrtombs, [ --enable-wcsrtombs use wcsrtombs instead of buggy (GNU libc1/Linux libc5) wcstombs], wxUSE_WCSRTOMBS)
+WX_ARG_ENABLE(wxprintfv, [ --enable-wxprintfv use wxWindows implementation of vprintf()], wxUSE_EXPERIMENTAL_PRINTF)
+WX_ARG_ENABLE(std_iostreams, [ --enable-std_iostreams use standard C++ stream classes], wxUSE_STD_IOSTREAM)
+WX_ARG_ENABLE(filesystem, [ --enable-filesystem use virtual file systems classes], wxUSE_FILESYSTEM)
+WX_ARG_ENABLE(fs_inet, [ --enable-fs_inet use virtual HTTP/FTP filesystems], wxUSE_FS_INET)
+WX_ARG_ENABLE(fs_zip, [ --enable-fs_zip use virtual ZIP filesystems], wxUSE_FS_ZIP)
+WX_ARG_ENABLE(zipstream, [ --enable-zipstream use wxZipInputStream], wxUSE_ZIPSTREAM)
+
+WX_ARG_ENABLE(catch_segvs, [ --enable-catch_segvs catch signals and pass them to wxApp::OnFatalException], wxUSE_ON_FATAL_EXCEPTION)
+WX_ARG_ENABLE(snglinst, [ --enable-snglinst use wxSingleInstanceChecker class], wxUSE_SNGLINST_CHECKER)
+
+WX_ARG_ENABLE(mimetype, [ --enable-mimetypes use wxMimeTypesManager], wxUSE_MIMETYPE)
+WX_ARG_ENABLE(system_options, [ --enable-sysoptions use wxSystemOptions], wxUSE_SYSTEM_OPTIONS)
+
+dnl ---------------------------------------------------------------------------
+dnl "big" options (i.e. those which change a lot of things throughout the library)
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(threads, [ --enable-threads use threads], wxUSE_THREADS)
+WX_ARG_ENABLE(serial, [ --enable-serial use class serialization], wxUSE_SERIAL)
+
+if test "$wxUSE_GUI" = "yes"; then
+
+dnl ---------------------------------------------------------------------------
+dnl "big" GUI options
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(docview, [ --enable-docview use document view architecture], wxUSE_DOC_VIEW_ARCHITECTURE)
+WX_ARG_ENABLE(help, [ --enable-help use help subsystem], wxUSE_HELP)
+WX_ARG_ENABLE(mshtmlhelp, [ --enable-mshtmlhelp use MS HTML Help (win32)], wxUSE_MS_HTML_HELP)
+WX_ARG_ENABLE(html, [ --enable-html use wxHTML sub-library], wxUSE_HTML)
+WX_ARG_ENABLE(htmlhelp, [ --enable-htmlhelp use wxHTML-based help], wxUSE_WXHTML_HELP)
+WX_ARG_ENABLE(constraints, [ --enable-constraints use layout-constraints system], wxUSE_CONSTRAINTS)
+WX_ARG_ENABLE(printarch, [ --enable-printarch use printing architecture], wxUSE_PRINTING_ARCHITECTURE)
+WX_ARG_ENABLE(mdi, [ --enable-mdi use multiple document interface architecture], wxUSE_MDI_ARCHITECTURE)
+WX_ARG_ENABLE(loggui, [ --enable-loggui use standard GUI logger], wxUSE_LOGGUI)
+WX_ARG_ENABLE(logwin, [ --enable-logwin use wxLogWindow], wxUSE_LOGWINDOW)
+
+dnl ---------------------------------------------------------------------------
+dnl PostScript options
+dnl ---------------------------------------------------------------------------
+WX_ARG_ENABLE(postscript, [ --enable-postscript use wxPostscriptDC device context (default for gtk+)], wxUSE_POSTSCRIPT)
+
+dnl VZ: these options seem to be always on, if someone wants to change it please do
+dnl WX_ARG_ENABLE(PS-normalized, [ --enable-PS-normalized use normalized PS fonts], dnl wxUSE_NORMALIZED_PS_FONTS)
+dnl WX_ARG_ENABLE(afmfonts, [ --enable-afmfonts use Adobe Font Metric Font table], dnl wxUSE_AFM_FOR_POSTSCRIPT)
+
+dnl ---------------------------------------------------------------------------
+dnl resources
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(prologio, [ --enable-prologio use Prolog IO library], wxUSE_PROLOGIO)
+WX_ARG_ENABLE(resources, [ --enable-resources use wxWindows resources], wxUSE_RESOURCES)
+
+WX_ARG_ENABLE(xresources, [ --enable-xresources use X resources for save (default for gtk+)], wxUSE_X_RESOURCES)
+
+dnl ---------------------------------------------------------------------------
+dnl IPC &c
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(clipboard, [ --enable-clipboard use wxClipboard classes], wxUSE_CLIPBOARD)
+WX_ARG_ENABLE(dnd, [ --enable-dnd use Drag'n'Drop classes], wxUSE_DRAG_AND_DROP)
+WX_ARG_ENABLE(metafile, [ --enable-metafile use win32 metafiles], wxUSE_METAFILE)
+
+WX_ARG_ENABLE(treelayout, [ --enable-treelayout use wxTreeLayout classes], wxUSE_TREELAYOUT)
+
+dnl ---------------------------------------------------------------------------
+dnl optional GUI controls (in alphabetical order except the first one)
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(controls, [ --enable-controls use all usual controls], wxUSE_CONTROLS)
+
+dnl even with --enable-controls, some may be disabled by giving
+dnl --disable-<control> later on the command line - but by default all will be
+dnl used (and vice versa)
+if test "$wxUSE_CONTROLS" = "yes"; then
+ DEFAULT_wxUSE_ACCEL=yes
+ DEFAULT_wxUSE_BMPBUTTON=yes
+ DEFAULT_wxUSE_BUTTON=yes
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=yes
+ DEFAULT_wxUSE_COMBOBOX=yes
+ DEFAULT_wxUSE_CHECKBOX=yes
+ DEFAULT_wxUSE_CHECKLISTBOX=yes
+ DEFAULT_wxUSE_CHOICE=yes
+ DEFAULT_wxUSE_GAUGE=yes
+ DEFAULT_wxUSE_GRID=yes
+ DEFAULT_wxUSE_NEW_GRID=yes
+ DEFAULT_wxUSE_IMAGLIST=yes
+ DEFAULT_wxUSE_LISTBOX=yes
+ DEFAULT_wxUSE_LISTCTRL=yes
+ DEFAULT_wxUSE_NOTEBOOK=yes
+ DEFAULT_wxUSE_PROPSHEET=yes
+ DEFAULT_wxUSE_RADIOBOX=yes
+ DEFAULT_wxUSE_RADIOBTN=yes
+ DEFAULT_wxUSE_SASH=yes
+ DEFAULT_wxUSE_SCROLLBAR=yes
+ DEFAULT_wxUSE_SLIDER=yes
+ DEFAULT_wxUSE_SPINBTN=yes
+ DEFAULT_wxUSE_SPINCTRL=yes
+ DEFAULT_wxUSE_SPLITTER=yes
+ DEFAULT_wxUSE_STATBMP=yes
+ DEFAULT_wxUSE_STATBOX=yes
+ DEFAULT_wxUSE_STATLINE=yes
+ DEFAULT_wxUSE_STATUSBAR=yes
+ DEFAULT_wxUSE_TAB_DIALOG=yes
+ DEFAULT_wxUSE_TOGGLEBTN=yes
+ DEFAULT_wxUSE_TOOLBAR=yes
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
+ DEFAULT_wxUSE_TOOLTIPS=yes
+ DEFAULT_wxUSE_TREECTRL=yes
+ DEFAULT_wxUSE_POPUPWIN=yes
+elif test "$wxUSE_CONTROLS" = "no"; then
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_BUTTON=no
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLISTBOX=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_PROPSHEET=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPINCTRL=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATUSBAR=no
+ DEFAULT_wxUSE_TAB_DIALOG=no
+ DEFAULT_wxUSE_TOGGLEBTN=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=no
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_TREECTRL=no
+ DEFAULT_wxUSE_POPUPWIN=no
+fi
+
+WX_ARG_ENABLE(accel, [ --enable-accel use accelerators], wxUSE_ACCEL)
+WX_ARG_ENABLE(button, [ --enable-button use wxButton class], wxUSE_BUTTON)
+WX_ARG_ENABLE(bmpbutton, [ --enable-bmpbutton use wxBitmapButton class], wxUSE_BMPBUTTON)
+WX_ARG_ENABLE(calendar, [ --enable-calendar use wxCalendarCtrl class], wxUSE_CALCTRL)
+WX_ARG_ENABLE(caret, [ --enable-caret use wxCaret class], wxUSE_CARET)
+WX_ARG_ENABLE(checkbox, [ --enable-checkbox use wxCheckBox class], wxUSE_CHECKBOX)
+WX_ARG_ENABLE(checklst, [ --enable-checklst use wxCheckListBox (listbox with checkboxes) class], wxUSE_CHECKLST)
+WX_ARG_ENABLE(choice, [ --enable-choice use wxChoice class], wxUSE_CHOICE)
+WX_ARG_ENABLE(combobox, [ --enable-combobox use wxComboBox classes], wxUSE_COMBOBOX)
+WX_ARG_ENABLE(gauge, [ --enable-gauge use wxGauge class], wxUSE_GAUGE)
+WX_ARG_ENABLE(grid, [ --enable-grid use wxGrid class], wxUSE_GRID)
+WX_ARG_ENABLE(newgrid, [ --enable-newgrid use new wxGrid class], wxUSE_NEW_GRID)
+WX_ARG_ENABLE(imaglist, [ --enable-imaglist use wxImageList class], wxUSE_IMAGLIST)
+WX_ARG_ENABLE(listbox, [ --enable-listbox use wxListBox class], wxUSE_LISTBOX)
+WX_ARG_ENABLE(listctrl, [ --enable-listctrl use wxListCtrl class], wxUSE_LISTCTRL)
+WX_ARG_ENABLE(notebook, [ --enable-notebook use wxNotebook class], wxUSE_NOTEBOOK)
+WX_ARG_ENABLE(propsheet, [ --enable-propsheet use wxPropertySheet class], wxUSE_PROPSHEET)
+WX_ARG_ENABLE(radiobox, [ --enable-radiobox use wxRadioBox class], wxUSE_RADIOBOX)
+WX_ARG_ENABLE(radiobtn, [ --enable-radiobtn use wxRadioButton class], wxUSE_RADIOBTN)
+WX_ARG_ENABLE(sash, [ --enable-sash use wxSashWindow class], wxUSE_SASH)
+WX_ARG_ENABLE(scrollbar, [ --enable-scrollbar use wxScrollBar class and scrollable windows], wxUSE_SCROLLBAR)
+WX_ARG_ENABLE(slider, [ --enable-slider use wxSlider class], wxUSE_SLIDER)
+WX_ARG_ENABLE(spinbtn, [ --enable-spinbtn use wxSpinButton class], wxUSE_SPINBTN)
+WX_ARG_ENABLE(spinctrl, [ --enable-spinctrl use wxSpinCtrl class], wxUSE_SPINCTRL)
+WX_ARG_ENABLE(splitter, [ --enable-splitter use wxSplitterWindow class], wxUSE_SPLITTER)
+WX_ARG_ENABLE(statbmp, [ --enable-statbmp use wxStaticBitmap class], wxUSE_STATBMP)
+WX_ARG_ENABLE(statbox, [ --enable-statbox use wxStaticBox class], wxUSE_STATBOX)
+WX_ARG_ENABLE(statline, [ --enable-statline use wxStaticLine class], wxUSE_STATLINE)
+WX_ARG_ENABLE(stattext, [ --enable-stattext use wxStaticText class], wxUSE_STATTEXT)
+WX_ARG_ENABLE(statusbar, [ --enable-statusbar use wxStatusBar class], wxUSE_STATUSBAR)
+WX_ARG_ENABLE(tabdialog, [ --enable-tabdialog use wxTabControl class], wxUSE_TABDIALOG)
+WX_ARG_ENABLE(textctrl, [ --enable-textctrl use wxTextCtrl class], wxUSE_TEXTCTRL)
+WX_ARG_ENABLE(togglebtn, [ --enable-togglebtn use wxToggleButton class], wxUSE_TOGGLEBTN)
+WX_ARG_ENABLE(toolbar, [ --enable-toolbar use wxToolBar class], wxUSE_TOOLBAR)
+WX_ARG_ENABLE(tbarnative, [ --enable-tbarnative use native wxToolBar class], wxUSE_TOOLBAR_NATIVE)
+WX_ARG_ENABLE(tbarsmpl, [ --enable-tbarsmpl use wxToolBarSimple class], wxUSE_TOOLBAR_SIMPLE)
+WX_ARG_ENABLE(treectrl, [ --enable-treectrl use wxTreeCtrl class], wxUSE_TREECTRL)
+WX_ARG_ENABLE(popupwin, [ --enable-popupwin use wxPopUpWindow class], wxUSE_POPUPWIN)
+
+dnl ---------------------------------------------------------------------------
+dnl common dialogs
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(commondlg, [ --enable-commondlg use common dialogs (wxDirDialog, wxProgressDialog, wxTextDialog, ...)], wxUSE_COMMONDLGS)
+WX_ARG_ENABLE(choicedlg, [ --enable-choicedlg use wxChoiceDialog], wxUSE_CHOICEDLG)
+WX_ARG_ENABLE(coldlg, [ --enable-coldlg use wxColourDialog], wxUSE_COLOURDLG)
+WX_ARG_ENABLE(filedlg, [ --enable-filedlg use wxFileDialog], wxUSE_FILEDLG)
+WX_ARG_ENABLE(fontdlg, [ --enable-fontdlg use wxFontDialog], wxUSE_FONTDLG)
+WX_ARG_ENABLE(dirdlg, [ --enable-dirdlg use wxDirDialog], wxUSE_DIRDLG)
+WX_ARG_ENABLE(msgdlg, [ --enable-msgdlg use wxMessageDialog], wxUSE_MSGDLG)
+WX_ARG_ENABLE(numberdlg, [ --enable-numberdlg use wxNumberEntryDialog], wxUSE_NUMBERDLG)
+WX_ARG_ENABLE(textdlg, [ --enable-textdlg use wxTextDialog], wxUSE_TEXTDLG)
+WX_ARG_ENABLE(tipdlg, [ --enable-tipdlg use startup tips], wxUSE_STARTUP_TIPS)
+WX_ARG_ENABLE(progressdlg, [ --enable-progressdlg use wxProgressDialog], wxUSE_PROGRESSDLG)
+WX_ARG_ENABLE(wizarddlg, [ --enable-wizarddlg use wxWizard], wxUSE_WIZARDDLG)
+
+dnl ---------------------------------------------------------------------------
+dnl misc GUI options
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(menus, [ --enable-menus use wxMenu/wxMenuBar/wxMenuItem classes], wxUSE_MENUS)
+WX_ARG_ENABLE(miniframe, [ --enable-miniframe use wxMiniFrame class], wxUSE_MINIFRAME)
+WX_ARG_ENABLE(tooltips, [ --enable-tooltips use wxToolTip class], wxUSE_TOOLTIPS)
+WX_ARG_ENABLE(splines, [ --enable-splines use spline drawing code], wxUSE_SPLINES)
+WX_ARG_ENABLE(validators, [ --enable-validators use wxValidator and derived classes], wxUSE_VALIDATORS)
+WX_ARG_ENABLE(busyinfo, [ --enable-busyinfo use wxBusyInfo], wxUSE_BUSYINFO)
+WX_ARG_ENABLE(joystick, [ --enable-joystick compile in joystick support (Linux only)], wxUSE_JOYSTICK)
+WX_ARG_ENABLE(metafile, [ --enable-metafiles use wxMetaFile (Windows only)], wxUSE_METAFILE)
+WX_ARG_ENABLE(dragimage, [ --enable-dragimage use wxDragImage], wxUSE_DRAGIMAGE)
+
+dnl ---------------------------------------------------------------------------
+dnl support for image formats that do not rely on external library
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(image, [ --enable-image use wxImage class], wxUSE_IMAGE)
+WX_ARG_ENABLE(gif, [ --enable-gif use gif images (GIF file format)], wxUSE_GIF)
+WX_ARG_ENABLE(pcx, [ --enable-pcx use pcx images (PCX file format)], wxUSE_PCX)
+WX_ARG_ENABLE(pnm, [ --enable-pnm use pnm images (PNM file format)], wxUSE_PNM)
+WX_ARG_ENABLE(pnm, [ --enable-xpm use xpm images (XPM file format)], wxUSE_XPM)
+
+fi
+dnl for GUI only
+
+dnl cache the options values before (may be) aborting below
+WX_ARG_CACHE_FLUSH
+
+dnl check that no more than one toolkit is given and that if none are given that
+dnl we have a default one
+
+AC_MSG_CHECKING(for toolkit)
+
+if test "$wxUSE_GUI" = "yes"; then
+
+if test "$USE_BEOS" = 1; then
+ AC_MSG_ERROR([BeOS GUI is not supported yet, use --disable-gui])
+fi
+
+if test "$TOOLKIT_GIVEN" = 1; then
+ dnl convert "yes" to 1 and "no" to 0
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ eval "$var=`echo \$value | sed -e "s/yes/1/" -e "s/no/0/"`"
+ done
+else
+ dnl try to guess the most apropriate toolkit for this platform
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ if test "$has_toolkit_in_cache" != 1; then
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ else
+ var=DEFAULT_wxUSE_$toolkit
+ fi
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+fi
+
+dnl we suppose that expr is available (maybe there is a better way to do
+dnl this? what about using ALL_TOOLKITS? TODO)
+NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} + ${wxUSE_WINE:-0} + ${wxUSE_MINGW:-0} + ${wxUSE_CYGWIN:-0} + ${wxUSE_MGL:-0}`
+
+dnl Allow wxUSE_PM only for OS/2 with EMX.
+dnl Path separator; ':' for unix.
+dnl Stem for flex output; lexyy for OS/2, lex.yy otherwise
+dnl Extension for programs; '.exe' for OS/2 and msw builds (set later).
+case "${host}" in
+ *-pc-os2_emx )
+ NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
+ # PATH_IFS is autodetected by OS/2's configure (usually ';')
+ LEX_STEM="lexyy"
+ ;;
+ *)
+ PATH_IFS=':'
+ LEX_STEM="lex.yy"
+ ;;
+esac
+
+case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ AC_MSG_ERROR(Please specify a toolkit - cannot determine the default for ${host})
+ ;;
+ *)
+ AC_MSG_ERROR(Please specify at most one toolkit (may be some are cached?))
+esac
+
+dnl cache the wxUSE_<TOOLKIT> values too
+for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" != x; then
+ cache_var=CACHE_$toolkit
+ eval "cache=\$${cache_var}"
+ if test "$cache" = 1; then
+ echo "$var=$value" >> ${wx_arg_cache_file}
+ fi
+ if test "$value" = 1; then
+ toolkit_echo=`echo $toolkit | tr [[A-Z]] [[a-z]]`
+ AC_MSG_RESULT($toolkit_echo)
+ fi
+ fi
+done
+
+dnl from "if wxUSE_GUI"
+else
+ PATH_IFS=':'
+ AC_MSG_RESULT(base only)
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl Checks for programs
+dnl ---------------------------------------------------------------------------
+
+dnl flush the cache because checking for programs might abort
+AC_CACHE_SAVE
+
+dnl cross-compiling support: we're cross compiling if the build system is
+dnl different from the target one (assume host and target be always the same)
+if test "$build" != "$host" ; then
+ CC=$host_alias-gcc
+ CXX=$host_alias-c++
+ AR=$host_alias-ar
+ RANLIB=$host_alias-ranlib
+ DLLTOOL=$host_alias-dlltool
+ RESCOMP=$host_alias-windres
+ LD=$host_alias-ld
+ NM=$host_alias-nm
+ STRIP=$host_alias-strip
+fi
+
+dnl C-compiler checks
+dnl defines CC with the compiler to use
+dnl defines GCC with yes if using gcc
+dnl defines GCC empty if not using gcc
+dnl defines CFLAGS
+AC_PROG_CC
+
+CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`
+
+dnl what is the c-preprocessor
+dnl defines CPP with the c-preprocessor
+AC_PROG_CPP
+
+dnl is -traditional needed for correct compilations
+dnl adds -traditional for gcc if needed
+AC_PROG_GCC_TRADITIONAL
+
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+
+dnl C++-compiler checks
+dnl defines CXX with the compiler to use
+dnl defines GXX with yes if using gxx
+dnl defines GXX empty if not using gxx
+dnl defines CXXFLAGS
+AC_PROG_CXX
+
+dnl what is the C++-preprocessor
+dnl defines CXXCPP with the C++-preprocessor
+AC_PROG_CXXCPP
+
+CXXFLAGS=`echo "$CXXFLAGS" | sed 's/-g//g'`
+
+AC_LANG_RESTORE
+
+dnl ranlib command
+dnl defines RANLIB with the appropriate command
+AC_PROG_RANLIB
+
+dnl ar command
+dnl defines AR with the appropriate command
+AC_CHECK_PROG(AR, ar, ar, ar)
+
+dnl install checks
+dnl defines INSTALL with the appropriate command
+AC_PROG_INSTALL
+
+dnl strip command
+dnl defines STRIP as strip or nothing if not found
+AC_CHECK_PROG(STRIP, strip, strip, true)
+
+dnl check if VPATH works
+AC_MSG_CHECKING([make for VPATH support])
+dnl create Makefile
+cat - << EOF > confMake
+check : file
+ cp \$? \$@
+ cp \$? final_file
+EOF
+
+if test ! -d sub ; then
+ mkdir sub
+fi
+echo dummy > sub/file
+${MAKE-make} -f confMake VPATH=sub 2>&5 > /dev/null
+RESULT=$?
+rm -f sub/file check final_file confMake
+rmdir sub
+if test "$RESULT" = 0; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR([
+You need a make-utility that is able to use the variable
+VPATH correctly.
+If your version of make does not support VPATH correctly,
+please install GNU-make (possibly as gmake), and start
+configure with the following command:
+export MAKE=gmake; ./configure for sh-type shells
+setenv MAKE gmake; ./configure for csh-type shells
+Also please do remember to use gmake in this case every time
+you are trying to compile.
+])
+fi
+
+dnl YACC checks
+dnl defines YACC with the appropriate command
+AC_PROG_YACC
+
+dnl LEX checks
+dnl defines LEX with the appropriate command
+dnl defines LEXLIB with the appropriate library
+AC_PROG_LEX
+
+dnl needed for making link to setup.h
+AC_PROG_LN_S
+
+dnl ---------------------------------------------------------------------------
+dnl Define search path for includes and libraries: all headers and libs will be
+dnl looked for in all directories of this path
+dnl ---------------------------------------------------------------------------
+
+dnl notice that /usr/include should not be in this list, otherwise it breaks
+dnl compilation on Solaris/gcc because standard headers are included instead
+dnl of the gcc ones (correction: it *is* needed for broken AIX compiler - but
+dnl do put it last!)
+dnl
+dnl Also try to put all directories which may contain X11R6 before those which
+dnl may contain X11R5/4 - we want to use R6 on machines which have both!
+SEARCH_INCLUDE="\
+ /usr/local/include \
+ \
+ /usr/Motif-1.2/include \
+ /usr/Motif-2.1/include \
+ \
+ /usr/include/Motif1.2 \
+ /opt/xpm/include/X11 \
+ /opt/GBxpm/include/ \
+ /opt/GBxpm/X11/include/ \
+ \
+ /usr/Motif1.2/include \
+ /usr/dt/include \
+ /usr/openwin/include \
+ \
+ /usr/include/Xm \
+ \
+ /usr/X11R6/include \
+ /usr/X11R6.4/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X11/include \
+ /usr/include/X11 \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ X:/XFree86/include \
+ X:/XFree86/include/X11 \
+ \
+ /usr/include/gtk \
+ /usr/local/include/gtk \
+ /usr/include/glib \
+ /usr/local/include/glib \
+ \
+ /usr/include/qt \
+ /usr/local/include/qt \
+ \
+ /usr/include/windows \
+ /usr/include/wine \
+ /usr/local/include/wine \
+ \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/share/include \
+ \
+ /usr/include"
+
+SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` "
+
+dnl ------------------------------------------------------------------------
+dnl Check for libraries
+dnl ------------------------------------------------------------------------
+
+dnl flush the cache because checking for libraries below might abort
+AC_CACHE_SAVE
+
+dnl ----------------------------------------------------------------
+dnl search for toolkit (widget sets)
+dnl ----------------------------------------------------------------
+
+AFMINSTALL=
+
+if test "$wxUSE_GUI" = "yes"; then
+ USE_GUI=1
+
+ TOOLKIT=
+ TOOLKIT_INCLUDE=
+
+ GUI_TK_LIBRARY=
+ GUI_TK_LINK=
+
+ WXGTK12=
+ WXGTK127=
+ WXGTK20=
+
+ WXWINE=
+
+ if test "$wxUSE_CYGWIN" = 1 || test "$wxUSE_MINGW" = 1 ; then
+ AC_CHECK_HEADER(windows.h, [],
+ [
+ AC_MSG_ERROR(please set CFLAGS to contain the location of windows.h)
+ ])
+
+ INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS msw"
+
+ dnl --- Quick & Dirty ; link against most/all libraries
+ dnl --- This will bloat the executable, but it'll work for now...
+ LIBS="$LIBS -lkernel32 -luser32 -lgdi32 -lcomdlg32 -lwinspool -lwinmm -lshell32 -lcomctl32 -lctl3d32 -ladvapi32 -lwsock32"
+
+ dnl add extra odbc libs if we have compiled in odbc
+ if test "$wxUSE_ODBC" = "yes" ; then
+ LIBS="$LIBS -lodbc32 -lole32 -loleaut32"
+ fi
+
+ dnl -mwindows is needed to avoid that spawning of a console window
+ if test "$wxUSE_MINGW" = 1; then
+ LDFLAGS="$LDFLAGS -mwindows"
+ fi
+
+ TOOLKIT=MSW
+ GUIDIST=MSW_DIST
+
+ dnl we should calculate these
+ RCINCSWITCH="--include-dir"
+ RCDEFSWITCH="--define"
+ RCPREPROCESSOR="--preprocessor \"\$(CC) -c -E -xc-header -DRC_INVOKED\""
+ RCINPUTSWITCH="-i"
+ RCOUTPUTSWITCH="-o"
+ RESFLAGS="$RCPREPROCESSOR $RCINCSWITCH \$(top_srcdir)/include $RCINCSWITCH \$(top_srcdir)/\$(program_dir) $RCDEFSWITCH __WIN32__ $RCDEFSWITCH __WIN95__ $RCDEFSWITCH __GNUWIN32__"
+
+ dnl set optinal RES_PROGRAM_OPT to RES_PROGRAM
+ RESPROGRAM="\$(RES_PROGRAM)"
+ fi
+
+ if test "$wxUSE_GTK" = 1; then
+ AC_MSG_CHECKING([for GTK+ version])
+
+ gtk_version_cached=1
+ AC_CACHE_VAL(wx_cv_lib_gtk,
+ [
+ dnl stupid GTK+ AM macros produce their own messages, so we
+ dnl have to pass to the next line
+ gtk_version_cached=0
+ AC_MSG_RESULT("")
+
+ wx_cv_lib_gtk=
+ if test "x$wxUSE_GTK2" = "xyes"; then
+ AM_PATH_GTK_2_0(1.3.1, wx_cv_lib_gtk=2.0, gthread)
+ fi
+
+ if test -z "$wx_cv_lib_gtk"; then
+ AM_PATH_GTK(1.2.7, wx_cv_lib_gtk=1.2.7)
+ fi
+
+ if test -z "$wx_cv_lib_gtk"; then
+ AM_PATH_GTK(1.2.3, wx_cv_lib_gtk=1.2.3)
+ fi
+
+ if test -z "$wx_cv_lib_gtk"; then
+ dnl looks better in AC_MSG_RESULT
+ wx_cv_lib_gtk=none
+ else
+ dnl we need to cache GTK_CFLAGS and GTK_LIBS for the
+ dnl subsequent runs
+ wx_cv_cflags_gtk=$GTK_CFLAGS
+ wx_cv_libs_gtk=$GTK_LIBS
+ fi
+ ]
+ )
+
+ dnl if it wasn't cached, the messages from AM_PATH_GTK() above are
+ dnl enough
+ if test "$gtk_version_cached" = 1; then
+ AC_MSG_RESULT($wx_cv_lib_gtk)
+ fi
+
+ case "$wx_cv_lib_gtk" in
+ 2.0) WXGTK20=1
+ ;;
+ 1.2.7) WXGTK127=1
+ WXGTK12=1
+ ;;
+ 1.2.3) WXGTK12=1
+ ;;
+ *) AC_MSG_ERROR([
+Please check that gtk-config is in path, the directory
+where GTK+ libraries are installed (returned by
+'gtk-config --libs' command) is in LD_LIBRARY_PATH or
+equivalent variable and GTK+ is version 1.2.3 or above.
+ ])
+ ;;
+ esac
+
+ TOOLKIT_INCLUDE="$wx_cv_cflags_gtk"
+ GUI_TK_LIBRARY="$wx_cv_libs_gtk"
+
+ AFMINSTALL=afminstall
+ TOOLKIT=GTK
+ GUIDIST=GTK_DIST
+
+ dnl test for XIM support in libgdk
+ AC_CHECK_LIB(gdk, gdk_im_open, AC_DEFINE(HAVE_XIM))
+ fi
+
+ if test "$wxUSE_MGL" = 1; then
+ dnl FIXME_MGL - test for MGL's variants for freebsd etc.
+
+ AC_MSG_CHECKING(for SciTech MGL library)
+ if test "x$MGL_ROOT" = x ; then
+ AC_MSG_RESULT(not found)
+ AC_MSG_ERROR([Cannot find MGL library. Make sure MGL_ROOT is set.])
+ else
+ AC_MSG_RESULT($MGL_ROOT)
+ fi
+
+ MGL_OS=linux/gcc/glibc
+ MGL_LIB_TYPE=""
+
+ if test "$wxUSE_DEBUG_FLAG" = yes ; then
+ if test -f $MGL_ROOT/lib/debug/$MGL_OS/libmgl.a ; then
+ MGL_LIB_TYPE=debug
+ fi
+ fi
+ if test "x$MGL_LIB_TYPE" = x ; then
+ if test -f $MGL_ROOT/lib/release/$MGL_OS/libmgl.a ; then
+ MGL_LIB_TYPE=release
+ else
+ AC_MSG_ERROR([Cannot find MGL libraries, make sure they are compiled.])
+ fi
+ fi
+
+ TOOLKIT_INCLUDE="-I$MGL_ROOT/include"
+ GUI_TK_LIBRARY="-L$MGL_ROOT/lib/$MGL_LIB_TYPE/$MGL_OS -lmgl -lmglcpp -lpm"
+
+ AFMINSTALL=afminstall
+ TOOLKIT=MGL
+ GUIDIST=MGL_DIST
+ fi
+
+ if test "$wxUSE_WINE" = 1; then
+ AC_MSG_CHECKING(for WINE includes)
+ WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, windows.h)
+ if test "$ac_find_includes" != "" ; then
+ AC_MSG_RESULT(found $ac_find_includes)
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
+ else
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(please set CFLAGS to contain the location of windows.h)
+ fi
+
+ XPM_LINK=""
+ AC_MSG_CHECKING(for Xpm library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB,Xpm)
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="-L$ac_find_libraries"
+ XPM_LINK="-lXpm"
+ AC_DEFINE(wxHAVE_LIB_XPM)
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ AC_MSG_RESULT(no)
+ AC_MSG_WARN(library will be compiled without support for images in XPM format)
+ fi
+
+ MESA_LINK=""
+ AC_MSG_CHECKING(for Mesa library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB,MesaGL)
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries"
+ MESA_LINK="-lMesaGL"
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ AC_MSG_ERROR(no)
+ fi
+
+ GUI_TK_LINK="-lwine $MESA_LINK $XPM_LINK -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
+ WXWINE=1
+ TOOLKIT=MSW
+ GUIDIST=MSW_DIST
+ fi
+
+ dnl use standard macros to check for X headers/libs, this brings support
+ dnl for the standard configure options --x-includes and --x-libraries;
+ dnl the path to the X headers/libs is not only needed for motif, but also
+ dnl by the OpenGL and XKBlib.h checks further down
+
+ AC_PATH_XTRA
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
+ if test "$wxUSE_MOTIF" = 1; then
+ if test "$no_x" = "yes"; then
+ AC_MSG_ERROR(X11 not found, please use --x-includes and/or --x-libraries options)
+ fi
+
+ GUI_TK_LIBRARY="$X_LIBS"
+ TOOLKIT_INCLUDE="$X_CFLAGS"
+
+ AFMINSTALL=afminstall
+
+ dnl manual check for X11 headers/libs
+ dnl
+ dnl AC_MSG_CHECKING(for X11 headers)
+ dnl WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, X11/Intrinsic.h)
+ dnl if test "$ac_find_includes" != "" ; then
+ dnl AC_MSG_RESULT(found $ac_find_includes)
+ dnl else
+ dnl AC_MSG_RESULT(no)
+ dnl AC_MSG_ERROR(please set CFLAGS to contain the location of X11/Intrinsic.h)
+ dnl fi
+ dnl
+ dnl AC_MSG_CHECKING(for X11 libraries)
+ dnl WX_PATH_FIND_LIBRARIES($SEARCH_LIB, X11)
+ dnl if test "$ac_find_libraries" != "" ; then
+ dnl WX_INCLUDE_PATH_EXIST($ac_find_includes, $TOOLKIT_INCLUDE)
+ dnl WX_LINK_PATH_EXIST($ac_find_libraries, $GUI_TK_LIBRARY)
+ dnl
+ dnl GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ dnl TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE $ac_path_to_include"
+ dnl AC_MSG_RESULT(found at $ac_find_libraries)
+ dnl else
+ dnl AC_MSG_RESULT(no)
+ dnl AC_MSG_ERROR(please set LDFLAGS to contain the location of libX11)
+ dnl fi
+
+ COMPILED_X_PROGRAM=0
+
+ AC_MSG_CHECKING(for Motif/Lesstif headers)
+ WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, Xm/Xm.h)
+ if test "$ac_find_includes" != "" ; then
+ AC_MSG_RESULT(found $ac_find_includes)
+ else
+ AC_TRY_COMPILE(
+ [
+ #include <Xm/Xm.h>
+ ],
+ [
+ int version;
+
+ version = xmUseVersion;
+ ],
+ [
+ AC_MSG_RESULT(found in default search path)
+ COMPILED_X_PROGRAM=1
+ ],
+ [
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(please set CFLAGS to contain the location of Xm/Xm.h)
+ ]
+ )
+ fi
+
+ if test "$COMPILED_X_PROGRAM" = 0; then
+ AC_MSG_CHECKING(for Motif/Lesstif library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB, Xm)
+ if test "$ac_find_libraries" != "" ; then
+ WX_INCLUDE_PATH_EXIST($ac_find_includes, $TOOLKIT_INCLUDE)
+ WX_LINK_PATH_EXIST($ac_find_libraries, $GUI_TK_LIBRARY)
+
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE $ac_path_to_include"
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ dnl it might happen that we found headers in one of the standard
+ dnl paths but the libs are elsewhere - we do need to try to
+ dnl compile a sample program then here
+ AC_TRY_COMPILE(
+ [
+ #include <Xm/Xm.h>
+ ],
+ [
+ int version;
+
+ version = xmUseVersion;
+ ],
+ [
+ AC_MSG_RESULT(found in default search path)
+ COMPILED_X_PROGRAM=1
+ ],
+ [
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(please set LDFLAGS to contain the location of libXm)
+ ]
+ )
+ fi
+ fi
+
+ dnl we don't need this as we used AC_PATH_XTRA above which does it for us
+ dnl
+ dnl dnl if we already compiled a sample program, X libs are surely there
+ dnl if test "$COMPILED_X_PROGRAM" = 0; then
+ dnl AC_MSG_CHECKING(for Xt library)
+ dnl WX_PATH_FIND_LIBRARIES($SEARCH_LIB,Xt)
+ dnl if test "$ac_find_libraries" != "" ; then
+ dnl WX_LINK_PATH_EXIST($ac_find_libraries,$GUI_TK_LIBRARY)
+ dnl GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ dnl AC_MSG_RESULT(found at $ac_find_libraries)
+ dnl else
+ dnl AC_TRY_COMPILE
+ dnl (
+ dnl [
+ dnl #include <X11/Intrinsic.h>
+ dnl ],
+ dnl [
+ dnl char *p;
+ dnl p = XtMalloc(5);
+ dnl ],
+ dnl [
+ dnl AC_MSG_RESULT(found in default search path)
+ dnl COMPILED_X_PROGRAM=1
+ dnl ],
+ dnl [
+ dnl AC_MSG_RESULT(no)
+ dnl AC_MSG_ERROR(please set LDFLAGS to contain the location of libXt)
+ dnl ]
+ dnl )
+ dnl fi
+ dnl fi
+
+ XPM_LINK=""
+ AC_MSG_CHECKING(for Xpm library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB,Xpm)
+ if test "$ac_find_libraries" != "" ; then
+ WX_LINK_PATH_EXIST($ac_find_libraries,$GUI_TK_LIBRARY)
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ XPM_LINK="-lXpm "
+ AC_DEFINE(wxHAVE_LIB_XPM)
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ AC_TRY_COMPILE(
+ [
+ #include <X11/xpm.h>
+ ],
+ [
+ int version;
+
+ version = XpmLibraryVersion();
+ ],
+ [
+ XPM_LINK="-lXpm "
+ AC_DEFINE(wxHAVE_LIB_XPM)
+ AC_MSG_RESULT(found in default search path)
+ COMPILED_X_PROGRAM=0
+ ],
+ [
+ AC_MSG_RESULT(no)
+ AC_MSG_WARN(library will be compiled without support for images in XPM format)
+ ]
+ )
+ fi
+
+ GUI_TK_LINK="-lXm $XPM_LINK -lXmu -lXext -lXt -lX11"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
+ TOOLKIT=MOTIF
+ GUIDIST=MOTIF_DIST
+ fi
+
+ if test "$wxUSE_MAC" = 1; then
+ TOOLKIT=MAC
+ dnl we can't call this MAC_DIST or autoconf thinks its a macro
+ GUIDIST=MACX_DIST
+ fi
+
+ if test "$wxUSE_PM" = 1; then
+ TOOLKIT=PM
+ GUIDIST=GTK_DIST
+ fi
+
+ dnl the name of the directory where the files for this toolkit live
+ if test "$TOOLKIT" != "PM" ; then
+ TOOLKIT_DIR=`echo ${TOOLKIT} | tr "[[A-Z]]" "[[a-z]]"`
+ else
+ TOOLKIT_DIR="os2"
+ fi
+
+ dnl the (base) name of the library and support files for this toolkit
+ TOOLKIT_NAME="${TOOLKIT_DIR}"
+
+ dnl the list of paths containing the files for this toolkit
+ TOOLKIT_VPATH="\${top_srcdir}/src/${TOOLKIT_DIR}"
+
+ dnl need to add an extra dir for wxMotif
+ if test "$TOOLKIT_NAME" = "motif"; then
+ TOOLKIT_VPATH="${TOOLKIT_VPATH}${PATH_IFS}\${top_srcdir}/src/motif/xmcombo"
+ fi
+
+ dnl are we using the generic version with this low level toolkit?
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ TOOLKIT_NAME="${TOOLKIT_NAME}univ"
+ UNIV_VPATH="\${top_srcdir}/src/univ${PATH_IFS}\${top_srcdir}/src/univ/themes"
+ TOOLKIT_VPATH="${UNIV_VPATH}${PATH_IFS}${TOOLKIT_VPATH}"
+ SETUPH_DIR="univ"
+ else
+ SETUPH_DIR="${TOOLKIT_DIR}"
+ fi
+
+ dnl append 'd' to the debug library name
+ if test "$wxUSE_DEBUG_FLAG" = "yes"; then
+ TOOLKIT_NAME="${TOOLKIT_NAME}d"
+ fi
+
+ dnl the symbol which allows conditional compilation for the given toolkit
+ TOOLKIT_DEF="-D__WX${TOOLKIT}__"
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ TOOLKIT_DEF="${TOOLKIT_DEF} -D__WXUNIVERSAL__"
+ fi
+
+ dnl the name of the (libtool) library
+ WX_LIBRARY="wx_${TOOLKIT_NAME}"
+
+ dnl collect together all the object files for this port
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ ALL_OBJECTS="\$(GUI_LOWLEVEL_OBJS) \${UNIVOBJS}"
+ else
+ ALL_OBJECTS="\$(GUIOBJS)"
+ fi
+
+ ALL_OBJECTS="${ALL_OBJECTS} \$(COMMONOBJS) \$(GENERICOBJS)"
+
+ if test "$TOOLKIT" != "MSW"; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(UNIXOBJS)"
+ fi
+
+ if test "$wxUSE_HTML" = "yes"; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(HTMLOBJS)"
+ fi
+
+ dnl ODBC objects are Unix only
+ if test "$TOOLKIT" != "MSW"; then
+ if test "$wxUSE_ODBC" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(IODBCOBJS)"
+ fi
+ fi
+
+ dnl REGEX_INCLUDE is only set if we want regex support and if we use our
+ dnl own sources and not the system library
+ if test "x$REGEX_INCLUDE" != "x" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(REGEXOBJS)"
+ fi
+
+ if test "$wxUSE_LIBJPEG" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(JPEGOBJS)"
+ fi
+ if test "$wxUSE_LIBTIFF" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(TIFFOBJS)"
+ fi
+ if test "$wxUSE_LIBPNG" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(PNGOBJS)"
+ fi
+ if test "$wxUSE_ZLIB" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(ZLIBOBJS)"
+ fi
+ if test "$wxUSE_FREETYPE" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(FREETYPEOBJS)"
+ fi
+
+ dnl collect all .d files together as well
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ ALL_DEPFILES="\$(GUI_LOWLEVEL_DEPS) \$(UNIVDEPS)"
+ else
+ ALL_DEPFILES="\$(GUIDEPS)"
+ fi
+
+ ALL_DEPFILES="${ALL_DEPFILES} \$(COMMONDEPS) \$(GENERICDEPS)"
+
+ if test "$TOOLKIT" != "MSW"; then
+ ALL_DEPFILES="${ALL_DEPFILES} \$(UNIXDEPS)"
+ fi
+
+ if test "$wxUSE_HTML" = "yes"; then
+ ALL_DEPFILES="${ALL_DEPFILES} \$(HTMLDEPS)"
+ fi
+
+ dnl misc other files depending on the port
+ PORT_FILES="\${top_srcdir}/src/\$(TOOLKITDIR)/files.lst"
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ PORT_FILES="${PORT_FILES} \${top_srcdir}/src/univ/files.lst"
+ fi
+ RPM_FILES="src/\$(TOOLKITDIR)/rpmfiles.lst"
+ RPM_SPEC="wx\$(TOOLKIT).spec"
+
+ dnl distribute samples/demos/utils with GUI versions
+ GUIDIST="${GUIDIST} SAMPLES_DIST DEMOS_DIST UTILS_DIST MISC_DIST"
+ DISTDIR="wx\$(TOOLKIT)"
+else
+ USE_GUI=0
+
+ dnl this may be (almost) unneccesary for wxBase now we use TOOLKIT_NAME
+ TOOLKIT_DIR="base"
+
+ dnl well, we have to set it to something...
+ TOOLKIT_VPATH="."
+
+ dnl the base name of the library and wxXXX-config files
+ if test "$wxUSE_DEBUG_FLAG" = "yes"; then
+ TOOLKIT_NAME="${TOOLKIT_DIR}d"
+ else
+ TOOLKIT_NAME="${TOOLKIT_DIR}"
+ fi
+
+ TOOLKIT_DEF="-D__WXBASE__"
+
+ dnl the sources, their dependenices and the headers
+ ALL_OBJECTS="\$(BASE_OBJS) \$(BASE_UNIX_OBJS)"
+ ALL_DEPFILES="\$(BASE_DEPS) \$(BASE_UNIX_DEPS)"
+
+ dnl REGEX_INCLUDE is only set if we want regex support and if we use our
+ dnl own sources and not the system library
+ if test "x$REGEX_INCLUDE" != "x" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(REGEXOBJS)"
+ fi
+
+ if test "$wxUSE_ZLIB" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(ZLIBOBJS)"
+ fi
+
+ dnl building wxBase only
+ WX_LIBRARY="wx_${TOOLKIT_NAME}"
+
+ PORT_FILES="\${top_srcdir}/src/files.lst"
+ RPM_FILES="src/rpmfiles.lst"
+ RPM_SPEC="wxBase.spec"
+
+ dnl distribute only wxBase sources/headers
+ GUIDIST="BASE_DIST"
+ DISTDIR="wxBase"
+fi
+
+dnl the name of the (libtool) library
+WX_LIBRARY_NAME="lib${WX_LIBRARY}.la"
+WX_LIBRARY_NAME_GL="lib${WX_LIBRARY}_gl.la"
+
+dnl the name of the static library
+WX_LIBRARY_NAME_STATIC="lib${WX_LIBRARY}.a"
+WX_LIBRARY_NAME_STATIC_GL="lib${WX_LIBRARY}_gl.a"
+
+dnl the name of the shared library
+WX_LIBRARY_NAME_SHARED="lib${WX_LIBRARY}-${WX_RELEASE}.so.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
+WX_LIBRARY_NAME_SHARED_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.so.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
+
+dnl the name of the links to the shared library
+WX_LIBRARY_LINK1="lib${WX_LIBRARY}-${WX_RELEASE}.so.${WX_CURRENT}"
+WX_LIBRARY_LINK2="lib${WX_LIBRARY}-${WX_RELEASE}.so"
+WX_LIBRARY_LINK3="lib${WX_LIBRARY}.so"
+WX_LIBRARY_LINK1_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.so.${WX_CURRENT}"
+WX_LIBRARY_LINK2_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.so"
+WX_LIBRARY_LINK3_GL="lib${WX_LIBRARY}_gl.so"
+
+dnl shared library settings
+SHARED_LD=
+PIC_FLAG=
+WX_ALL=
+WX_ALL_INSTALLED=
+BURNT_LIBRARY_NAME=
+WX_TARGET_LIBRARY_SONAME=
+
+dnl --- the marker for quick search, leave it here: SHARED_LIB_SETUP ---
+
+if test "$wxUSE_SHARED" = "yes"; then
+ case "${host}" in
+ *-hp-hpux* )
+ if test "$GCC" = yes ; then
+ SHARED_LD="${CC} -shared -fPIC -o"
+ PIC_FLAG="-fPIC"
+ else
+ dnl no idea why it wants it, but it does
+ LDFLAGS="-L/usr/lib"
+
+ SHARED_LD="${CXX} -b -o"
+ PIC_FLAG="+Z"
+ fi
+ WX_LIBRARY_NAME_SHARED="libwx_${TOOLKIT_NAME}.sl"
+ WX_LIBRARY_NAME_SHARED_GL="libwx_${TOOLKIT_NAME}_gl.sl"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
+ WX_ALL="${WX_LIBRARY_NAME_SHARED} ${WX_LIBRARY_NAME_SHARED_GL}"
+ else
+ WX_ALL="${WX_LIBRARY_NAME_SHARED}"
+ fi
+ ;;
+
+ dnl in fact, these settings are for any platform using gcc
+ *-*-linux* )
+ SHARED_LD="${CC} -shared -o"
+ PIC_FLAG="-fPIC"
+ if test "$wxUSE_BURNT_NAME" = "yes" ; then
+ BURNT_LIBRARY_NAME="-Wl,-soname,${WX_LIBRARY_LINK1}"
+ BURNT_LIBRARY_NAME_GL="-Wl,-soname,${WX_LIBRARY_LINK1_GL}"
+ dnl substitute this in makelib.env for the contrib libs
+ WX_TARGET_LIBRARY_SONAME="-Wl,-soname,\$(TARGETLIB_LINK1)"
+ fi
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
+ WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
+ else
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ fi
+ ;;
+ *-*-irix5* | *-*-irix6* )
+ if test "$GCC" = yes ; then
+ SHARED_LD="${CC} -shared -o"
+ PIC_FLAG="-fPIC"
+ else
+ SHARED_LD="${CXX} -shared -o"
+ fi
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
+ WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
+ else
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ fi
+ ;;
+ *-*-solaris2* )
+ if test "$GCC" = yes ; then
+ SHARED_LD="${CC} -shared -o"
+ PIC_FLAG="-fPIC"
+
+ dnl newer versions of gcc need -isystem to compile X headers on
+ dnl Solaris (which use old style C syntax)
+ CPPFLAGS="$CPPFLAGS -isystem /usr/openwin/include"
+ else
+ SHARED_LD="${CXX} -G -o"
+ PIC_FLAG="-KPIC"
+ fi
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
+ WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
+ else
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ fi
+ ;;
+ *-*-sunos4* )
+ SHARED_LD="${CC} -shared -o"
+ PIC_FLAG="-fPIC"
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ ;;
+ *-*-freebsd* | *-*-openbsd* | *-*-netbsd* )
+ SHARED_LD="${CC} -shared -o"
+ PIC_FLAG="-fPIC"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
+ WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
+ else
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ fi
+ ;;
+ *-*-darwin* )
+ TOOLKIT_DEF="${TOOLKIT_DEF} -D__UNIX__ -D__DARWIN__ -D__POWERPC__"
+ CFLAGS="${CFLAGS} -fno-common"
+ CPPFLAGS="${CPPFLAGS} -fno-common"
+ SHARED_LD="${CXX} -dynamiclib -o"
+ PIC_FLAG="-dynamic -fPIC"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
+ WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
+ else
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ fi
+ dnl add the resources target for wxMac
+ if test "$wxUSE_MAC" = 1 ; then
+ WX_ALL="${WX_ALL} ./lib/lib${WX_LIBRARY}-${WX_RELEASE}.r"
+ fi
+ dnl the name of the shared library
+ WX_LIBRARY_NAME_SHARED="lib${WX_LIBRARY}-${WX_RELEASE}.dylib.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
+ WX_LIBRARY_NAME_SHARED_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.dylib.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
+ dnl the name of the links to the shared library
+ WX_LIBRARY_LINK1="lib${WX_LIBRARY}-${WX_RELEASE}.dylib.${WX_CURRENT}"
+ WX_LIBRARY_LINK2="lib${WX_LIBRARY}-${WX_RELEASE}.dylib"
+ WX_LIBRARY_LINK3="lib${WX_LIBRARY}.dylib"
+ WX_LIBRARY_LINK1_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.dylib.${WX_CURRENT}"
+ WX_LIBRARY_LINK2_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.dylib"
+ WX_LIBRARY_LINK3_GL="lib${WX_LIBRARY}_gl.dylib"
+ ;;
+ *-*-osf* )
+ SHARED_LD="${CXX} -shared -o"
+ PIC_FLAG="-fPIC"
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ ;;
+ *-*-dgux5* )
+ SHARED_LD="${CXX} -shared -o"
+ PIC_FLAG="-fPIC"
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ ;;
+ *-*-sysv5* )
+ SHARED_LD="${CC} -shared -o"
+ PIC_FLAG="-fPIC"
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ ;;
+ *-*-aix* )
+ SHARED_LD="/usr/lpp/xlC/bin/makeC++SharedLib -p 0 -o"
+ WX_ALL=${WX_LIBRARY_NAME_SHARED}
+ ;;
+ *-*-cygwin* )
+ dnl only static for now
+ WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
+ WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
+ WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
+ else
+ WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ fi
+ ;;
+ *-*-mingw32* )
+ dnl only static for now
+ WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
+ WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
+ WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
+ else
+ WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ fi
+ ;;
+ *-pc-os2_emx )
+ dnl only static for now
+ WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
+ WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ ;;
+ *-*-beos* )
+ dnl can't use gcc under BeOS for shared library creation because it
+ dnl complains about missing 'main'
+ SHARED_LD="${LD} -shared -o"
+ PIC_FLAG="-fPIC"
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ ;;
+ *)
+ AC_MSG_ERROR(unknown system type ${host}.)
+ esac
+
+ dnl set target to shared if not explicitly chose static before
+ if test "x$WX_TARGET_LIBRARY" = "x"; then
+ WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_SHARED}"
+ WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_SHARED_GL}"
+ fi
+ dnl do not alter the LIBRARY_TYPE strings "so" and "a", they are magic
+ WX_TARGET_LIBRARY_TYPE="so"
+else
+ dnl set target to static
+ WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
+ WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
+
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
+ WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
+ else
+ WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ fi
+
+ dnl give static wxBase build a working install target
+ if test "$wxUSE_GUI" = "no"; then
+ dnl we're here because WX_ALL_INSTALLED is empty, but play safe anyway
+ WX_ALL_INSTALLED="${WX_ALL_INSTALLED} preinstall"
+ fi
+
+ WX_TARGET_LIBRARY_TYPE="a"
+fi
+
+dnl ------------------------------------------------------------------------
+dnl Check for headers
+dnl ------------------------------------------------------------------------
+
+dnl defines HAVE_STRINGS_H (where some string functions live on AIX for example)
+AC_CHECK_HEADERS(strings.h)
+dnl defines HAVE_STDLIB_H
+AC_CHECK_HEADERS(stdlib.h)
+dnl defines HAVE_UNISTD_H
+AC_CHECK_HEADERS(unistd.h)
+dnl defines HAVE_WCHAR_H
+AC_CHECK_HEADERS(wchar.h)
+dnl defines HAVE_WCSTR_H
+AC_CHECK_HEADERS(wcstr.h)
+dnl defines HAVE_FNMATCH_H
+AC_CHECK_HEADERS(fnmatch.h)
+dnl defines HAVE_ICONV_H (Unix98 encoding conversion routines)
+AC_CHECK_HEADERS(iconv.h)
+dnl defines HAVE_LANGINFO_H (GNU libc locale parameters)
+AC_CHECK_HEADERS(langinfo.h)
+
+if test "$wxUSE_GUI" = "yes"; then
+ if test "$wxUSE_UNIX" = "yes"; then
+ dnl defines HAVE_X11_XKBLIB_H
+ AC_CHECK_HEADERS(X11/XKBlib.h)
+ fi
+fi
+
+if test "$USE_WIN32" = 1; then
+ AC_CHECK_HEADERS(w32api.h)
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl Checks for typedefs
+dnl ---------------------------------------------------------------------------
+
+dnl defines mode_t if not already defined
+AC_TYPE_MODE_T
+dnl defines off_t if not already defined
+AC_TYPE_OFF_T
+dnl defines pid_t if not already defined
+AC_TYPE_PID_T
+dnl defines size_t if not already defined
+AC_TYPE_SIZE_T
+dnl defines uid_t and gid_t if not already defined
+AC_TYPE_UID_T
+
+dnl check for wchar_t
+AC_CACHE_CHECK([for wchar_t], wx_cv_type_wchar_t,
+[
+ AC_TRY_COMPILE([#include <wchar.h>],
+ [
+ wchar_t wc, *ws;
+ wc = L'a';
+ ws = L"Hello, world!";
+ ],
+ wx_cv_type_wchar_t=yes,
+ AC_TRY_COMPILE([#include <stdlib.h>],
+ [
+ wchar_t wc, *ws;
+ wc = L'a';
+ ws = L"Hello, world!";
+ ],
+ wx_cv_type_wchar_t=yes,
+ wx_cv_type_wchar_t=no)
+ )
+])
+
+if test "$wx_cv_type_wchar_t" = "yes"; then
+ AC_DEFINE(wxUSE_WCHAR_T)
+fi
+
+dnl check what exactly size_t is on this machine - this is necessary to avoid
+dnl ambiguos overloads in several places, notably wx/string.h and wx/array.h
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+AC_CACHE_CHECK([if size_t is unsigned int],
+ wx_cv_size_t_is_uint,
+ dnl an obvious check like AC_TRY_COMPILE[struct Foo { ... };] doesn't work
+ dnl with egcs (at least) up to 1.1.1 as it allows you to compile duplicate
+ dnl methods in a local class (i.e. class inside a function) declaration
+ dnl without any objections!!
+ dnl
+ dnl hence the hack below: we must have Foo at global scope!
+ AC_TRY_COMPILE([#include <stddef.h>],
+ [
+ return 0; }
+
+ struct Foo { void foo(size_t); void foo(unsigned int); };
+
+ int bar() {
+ ],
+ wx_cv_size_t_is_uint=no,
+ wx_cv_size_t_is_uint=yes
+ )
+)
+
+if test "$wx_cv_size_t_is_uint" = "yes"; then
+ AC_DEFINE(wxSIZE_T_IS_UINT)
+else
+ AC_CACHE_CHECK([if size_t is unsigned long],
+ wx_cv_size_t_is_ulong,
+ AC_TRY_COMPILE([#include <stddef.h>],
+ [
+ return 0; }
+
+ struct Foo { void foo(size_t); void foo(unsigned long); };
+
+ int bar() {
+ ],
+ wx_cv_size_t_is_ulong=no,
+ wx_cv_size_t_is_ulong=yes
+ )
+ )
+
+ if test "$wx_cv_size_t_is_ulong" = "yes"; then
+ AC_DEFINE(wxSIZE_T_IS_ULONG)
+ fi
+fi
+
+AC_LANG_RESTORE
+
+dnl ---------------------------------------------------------------------------
+dnl Checks for structures
+dnl ---------------------------------------------------------------------------
+
+dnl does passwd struct has the pw_gecos field?
+AC_CACHE_CHECK([for pw_gecos in struct passwd], wx_cv_struct_pw_gecos,
+ [
+ AC_TRY_COMPILE([#include <pwd.h>],
+ [
+ char *p;
+ struct passwd *pw;
+ p = pw->pw_gecos;
+ ],
+ [
+ wx_cv_struct_pw_gecos=yes
+ ],
+ [
+ wx_cv_struct_pw_gecos=no
+ ]
+ )
+ ]
+)
+
+if test "$wx_cv_struct_pw_gecos" = "yes"; then
+ AC_DEFINE(HAVE_PW_GECOS)
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl Checks for compiler characteristics
+dnl ---------------------------------------------------------------------------
+
+dnl defines const to be empty if c-compiler does not support const fully
+AC_C_CONST
+dnl defines inline to a sensible value for the c-compiler
+AC_C_INLINE
+
+dnl check the sizes of integral types (give some reasonable default values for
+dnl cross-compiling)
+dnl defines the size of certain types of variables in SIZEOF_<TYPE>
+AC_CHECK_SIZEOF(char, 1)
+AC_CHECK_SIZEOF(short, 2)
+AC_CHECK_SIZEOF(int *, 4)
+AC_CHECK_SIZEOF(int, 4)
+AC_CHECK_SIZEOF(long, 4)
+AC_CHECK_SIZEOF(long long, 0)
+
+dnl we have to do it ourselves because SGI/Irix's stdio.h does not include
+dnl wchar_t an AC_CHECK_SIZEOF only includes stdio.h
+dnl Mac OS X does not provide wchar.h and wchar_t is defined by stdlib.h (GD)
+AC_CACHE_CHECK([size of wchar_t], wx_cv_sizeof_wchar_t,
+[
+ AC_TRY_RUN(
+ [
+ #ifdef HAVE_WCHAR_H
+ # include <wchar.h>
+ #endif
+ #ifdef HAVE_STDLIB_H
+ # include <stdlib.h>
+ #endif
+ #include <stdio.h>
+ int main()
+ {
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%i", sizeof(wchar_t));
+ exit(0);
+ }
+ ],
+ wx_cv_sizeof_wchar_t=`cat conftestval`,
+ wx_cv_sizeof_wchar_t=0,
+ wx_cv_sizeof_wchar_t=4
+ )
+])
+
+AC_DEFINE_UNQUOTED(SIZEOF_WCHAR_T, $wx_cv_sizeof_wchar_t)
+
+dnl for bytesex stuff (don't use AC_C_BIGENDIAN to allow cross-compiling)
+WX_C_BIGENDIAN
+
+dnl check for iostream (as opposed to iostream.h) standard header
+WX_CPP_NEW_HEADERS(, AC_DEFINE(wxUSE_IOSTREAMH))
+
+dnl check whether C++ compiler supports bool built-in type
+WX_CPP_BOOL
+
+dnl ---------------------------------------------------------------------------
+dnl Check for functions
+dnl ---------------------------------------------------------------------------
+
+dnl check for wcslen
+AC_CHECK_LIB(c, wcslen, [
+ AC_DEFINE(HAVE_WCSLEN)
+ WCHAR_LINK=""
+ ], [
+ AC_CHECK_LIB(w, wcslen, [
+ AC_DEFINE(HAVE_WCSLEN)
+ WCHAR_LINK="-lw"
+ ])
+ ])
+
+dnl check for vprintf/vsprintf() which are GNU extensions
+AC_FUNC_VPRINTF
+
+
+dnl check for vsscanf() and vsnprintf() - on some platforms (Linux, glibc
+dnl 2.1.1 for the first one, HP-UX for the second) it's available in the
+dnl library but the prototype is missing, so we can't use AC_CHECK_FUNCS here,
+dnl do it manually
+
+dnl we use AC_TRY_COMPILE() here instead of AC_TRY_RUN() to make the checks
+dnl work for cross-compilation, but AC_TRY_COMPILE() normally only compiles
+dnl one function while we need at least 2 - hence the ugly hack below. To
+dnl understand why it works, remember that AC_TRY_COMPILE() just prepends
+dnl "int main() {" in the beginning of the code and "; return 0; }" at the
+dnl end...
+
+dnl if we fail to find vsnprintf, also try for _vsnprintf as that is what
+dnl we'll find under MSW if it exists.
+
+dnl final note: AC_TRY_COMPILE will only be executed if there is nothing in
+dnl the cache so we have to do AC_DEFINE(HAVE_VSNPRINTF) below and not inside
+dnl it or the symbol wouldn't be defined for the 2nd and subsequent configure
+dnl runs
projects / wxWidgets.git / blobdiff