\section{\class{wxTextCtrl}}\label{wxtextctrl}
A text control allows text to be displayed and edited. It may be
-single line or multiline.
+single line or multi-line.
\wxheading{Derived from}
\helpref{wxEvtHandler}{wxevthandler}\\
\helpref{wxObject}{wxobject}
+\wxheading{Include files}
+
+<wx/textctrl.h>
+
\wxheading{Window styles}
\twocolwidtha{5cm}
\begin{twocollist}\itemsep=0pt
-\twocolitem{\windowstyle{wxTE\_PROCESS\_ENTER}}{The callback function will
-receive the message wxEVENT\_TYPE\_TEXT\_ENTER\_COMMAND. Note
-that this will break tab traversal for this panel item under
-Windows.}
+\twocolitem{\windowstyle{wxTE\_PROCESS\_ENTER}}{The control will generate
+the message wxEVENT\_TYPE\_TEXT\_ENTER\_COMMAND (otherwise pressing <Enter> is
+either processed internally by the control or used for navigation between
+dialog controls).}
+\twocolitem{\windowstyle{wxTE\_PROCESS\_TAB}}{The control will receieve
+EVT\_CHAR messages for TAB pressed - normally, TAB is used for passing to the
+next control in a dialog instead. For the control created with this style,
+you can still use Ctrl-Enter to pass to the next control from the keyboard.}
\twocolitem{\windowstyle{wxTE\_MULTILINE}}{The text control allows multiple lines.}
\twocolitem{\windowstyle{wxTE\_PASSWORD}}{The text will be echoed as asterisks.}
\twocolitem{\windowstyle{wxTE\_READONLY}}{The text will not be user-editable.}
-\twocolitem{\windowstyle{wxHSCROLL}}{A vertical scrollbar will be present.}
+\twocolitem{\windowstyle{wxHSCROLL}}{A horizontal scrollbar will be created. No effect under GTK+.}
\end{twocollist}
-See also \helpref{window styles overview}{windowstyles}.
+See also \helpref{window styles overview}{windowstyles} and
+\helpref{wxTextCtrl::wxTextCtrl}{wxtextctrlconstr}.
\wxheading{Remarks}
-This class multiply-inherits from {\bf streambuf} where compilers allow, allowing code such
-as the following:
+This class multiply-inherits from {\bf streambuf} where compilers allow, allowing code such as
+the following:
{\small%
\begin{verbatim}
\end{verbatim}
}%
-If your compiler does not support derivation from {\bf streambuf} and gives a compile error, define the symbol {\bf NO\_TEXT\_WINDOW\_STREAM} in the
-wxTextCtrl header file.
+If your compiler does not support derivation from {\bf streambuf} and gives a compile error, define the symbol
+{\bf NO\_TEXT\_WINDOW\_STREAM} in the wxTextCtrl header file.
+
+Note that any use of C++ iostreams (including this one) deprecated and might get completely removed
+in the future.
\wxheading{Event handling}
+The following commands are processed by default event handlers in wxTextCtrl: wxID\_CUT, wxID\_COPY,
+wxID\_PASTE, wxID\_UNDO, wxID\_REDO. The associated UI update events are also processed
+automatically, when the control has the focus.
+
To process input from a text control, use these event handler macros to direct input to member
functions that take a \helpref{wxCommandEvent}{wxcommandevent} argument.
\twocolwidtha{7cm}%
\begin{twocollist}\itemsep=0pt
\twocolitem{{\bf EVT\_TEXT(id, func)}}{Respond to a wxEVT\_COMMAND\_TEXT\_UPDATED event,
-generated when the text changes.}
+generated when the text changes. Notice that this event will always be sent
+when the text controls contents changes - whether this is due to user input or
+comes from the program itself (for example, if SetValue() is called)}
\twocolitem{{\bf EVT\_TEXT\_ENTER(id, func)}}{Respond to a wxEVT\_COMMAND\_TEXT\_ENTER event,
generated when enter is pressed in a single-line text control.}
\end{twocollist}%
Default constructor.
\func{}{wxTextCtrl}{\param{wxWindow* }{parent}, \param{wxWindowID}{ id},\rtfsp
-\param{const wxString\& }{value = ``"}, \param{const wxPosition\& }{pos}, \param{const wxSize\& }{size = wxDefaultSize},\rtfsp
+\param{const wxString\& }{value = ``"}, \param{const wxPoint\& }{pos}, \param{const wxSize\& }{size = wxDefaultSize},\rtfsp
\param{long}{ style = 0}, \param{const wxValidator\& }{validator}, \param{const wxString\& }{name = ``text"}}
Constructor, creating and showing a text control.
\wxheading{Remarks}
+The horizontal scrollbar ({\bf wxTE\_HSCROLL} style flag) will only be created for multi-line text controls.
+Without a horizontal scrollbar, text lines that don't fit in the control's
+size will be wrapped (but no newline character is inserted). Single line
+controls don't have a horizontal scrollbar, the text is automatically scrolled
+so that the \helpref{insertion point}{wxtextctrlgetinsertionpoint} is always
+visible.
+
Under Windows, if the {\bf wxTE\_MULTILINE} style is used, the window is implemented
as a Windows rich text control with unlimited capacity. Otherwise, normal edit control limits
apply.
Destructor, destroying the text control.
+\membersection{wxTextCtrl::AppendText}\label{wxtextctrlappendtext}
+
+\func{void}{AppendText}{\param{const wxString\& }{ text}}
+
+Appends the text to the end of the text control.
+
+\wxheading{Parameters}
+
+\docparam{text}{Text to write to the text control.}
+
+\wxheading{Remarks}
+
+After the text is appended, the insertion point will be at the end of the text control. If this behaviour is not desired,
+the programmer should use \helpref{GetInsertionPoint}{wxtextctrlgetinsertionpoint} and \helpref{SetInsertionPoint}{wxtextctrlsetinsertionpoint}.
+
+\wxheading{See also}
+
+\helpref{wxTextCtrl::WriteText}{wxtextctrlwritetext}
+
+\membersection{wxTextCtrl::CanCopy}\label{wxtextctrlcancopy}
+
+\func{virtual bool}{CanCopy}{\void}
+
+Returns TRUE if the selection can be copied to the clipboard.
+
+\membersection{wxTextCtrl::CanCut}\label{wxtextctrlcancut}
+
+\func{virtual bool}{CanCut}{\void}
+
+Returns TRUE if the selection can be cut to the clipboard.
+
+\membersection{wxTextCtrl::CanPaste}\label{wxtextctrlcanpaste}
+
+\func{virtual bool}{CanPaste}{\void}
+
+Returns TRUE if the contents of the clipboard can be pasted into the
+text control. On some platforms (Motif, GTK) this is an approximation
+and returns TRUE if the control is editable, FALSE otherwise.
+
+\membersection{wxTextCtrl::CanRedo}\label{wxtextctrlcanredo}
+
+\func{virtual bool}{CanRedo}{\void}
+
+Returns TRUE if there is a redo facility available and the last operation
+can be redone.
+
+\membersection{wxTextCtrl::CanUndo}\label{wxtextctrlcanundo}
+
+\func{virtual bool}{CanUndo}{\void}
+
+Returns TRUE if there is an undo facility available and the last operation
+can be undone.
+
\membersection{wxTextCtrl::Clear}\label{wxtextctrlclear}
\func{virtual void}{Clear}{\void}
\membersection{wxTextCtrl::Create}\label{wxtextctrlcreate}
\func{bool}{Create}{\param{wxWindow* }{parent}, \param{wxWindowID}{ id},\rtfsp
-\param{const wxString\& }{value = ``"}, \param{const wxPosition\& }{pos}, \param{const wxSize\& }{size = wxDefaultSize},\rtfsp
+\param{const wxString\& }{value = ``"}, \param{const wxPoint\& }{pos}, \param{const wxSize\& }{size = wxDefaultSize},\rtfsp
\param{long}{ style = 0}, \param{const wxValidator\& }{validator}, \param{const wxString\& }{name = ``text"}}
Creates the text control for two-step construction. Derived classes
\constfunc{virtual long}{GetInsertionPoint}{\void}
-Returns the insertion point.
+Returns the insertion point. This is defined as the zero based index of the
+character position to the right of the insertion point. For example, if
+the insertion point is at the end of the text control, it is equal to
+both \helpref{GetValue()}{wxtextctrlgetvalue}.Length() and
+\helpref{GetLastPosition()}{wxtextctrlgetlastposition}.
+
+The following code snippet safely returns the character at the insertion
+point or the zero character if the point is at the end of the control.
+
+{\small%
+\begin{verbatim}
+ char GetCurrentChar(wxTextCtrl *tc) {
+ if (tc->GetInsertionPoint() == tc->GetLastPosition())
+ return '\0';
+ return tc->GetValue[tc->GetInsertionPoint()];
+ }
+\end{verbatim}
+}%
\membersection{wxTextCtrl::GetLastPosition}\label{wxtextctrlgetlastposition}
\constfunc{virtual long}{GetLastPosition}{\void}
-Returns the last position in the text control.
+Returns the zero based index of the last position in the text control,
+which is equal to the number of characters in the control.
\membersection{wxTextCtrl::GetLineLength}\label{wxtextctrlgetlinelength}
\constfunc{int}{GetLineLength}{\param{long}{ lineNo}}
-Gets the length of the specified line.
+Gets the length of the specified line, not including any trailing newline
+character(s).
\wxheading{Parameters}
\constfunc{wxString}{GetLineText}{\param{long}{ lineNo}}
-Returns the contents of a given line in the text control.
+Returns the contents of a given line in the text control, not including
+any trailing newline character(s).
\wxheading{Parameters}
Returns the number of lines in the text control buffer.
+\wxheading{Remarks}
+
+Note that even empty text controls have one line (where the insertion point
+is), so GetNumberOfLines() never returns 0.
+
+For gtk\_text (multi-line) controls, the number of lines is
+calculated by actually counting newline characters in the buffer. You
+may wish to avoid using functions that work with line numbers if you are
+working with controls that contain large amounts of text.
+
+\membersection{wxTextCtrl::GetSelection}\label{wxtextctrlgetselection}
+
+\func{virtual void}{GetSelection}{\param{long*}{ from}, \param{long*}{ to}}
+
+Gets the current selection span. If the returned values are equal, there was
+no selection.
+
+\wxheading{Parameters}
+
+\docparam{from}{The returned first position.}
+
+\docparam{to}{The returned last position.}
+
+\pythonnote{The wxPython version of this method returns a tuple
+consisting of the from and to values.}
+
\membersection{wxTextCtrl::GetValue}\label{wxtextctrlgetvalue}
\constfunc{wxString}{GetValue}{\void}
-Gets the contents of the control.
+Gets the contents of the control. Notice that for a multiline text control,
+the lines will be separated by (Unix-style) $\backslash$n characters, even under
+Windows where they are separated by a $\backslash$r$\backslash$n sequence in the native control.
\membersection{wxTextCtrl::IsModified}\label{wxtextctrlismodified}
\docparam{event}{The drop files event.}
+\wxheading{Remarks}
+
+This is not implemented on non-Windows platforms.
+
\wxheading{See also}
\helpref{wxDropFilesEvent}{wxdropfilesevent}
\membersection{wxTextCtrl::PositionToXY}\label{wxtextctrlpositiontoxy}
-\constfunc{long}{PositionToXY}{\param{long }{pos}, \param{long *}{x}, \param{long *}{y}}
+\constfunc{bool}{PositionToXY}{\param{long }{pos}, \param{long *}{x}, \param{long *}{y}}
-Converts given character and line position to a position.
+Converts given position to a zero-based column, line number pair.
\wxheading{Parameters}
\docparam{pos}{Position.}
-\docparam{x}{Receives character position.}
+\docparam{x}{Receives zero based column number.}
-\docparam{y}{Receives line position.}
+\docparam{y}{Receives zero based line number.}
+
+\wxheading{Return value}
+
+TRUE on success, FALSE on failure (most likely due to a too large position
+parameter).
\wxheading{See also}
\helpref{wxTextCtrl::XYToPosition}{wxtextctrlxytoposition}
+\pythonnote{In Python, PositionToXY() returns a tuple containing the x and
+y values, so (x,y) = PositionToXY() is equivalent to the call described
+above.}
+
+\membersection{wxTextCtrl::Redo}\label{wxtextctrlredo}
+
+\func{virtual void}{Redo}{\void}
+
+If there is a redo facility and the last operation can be redone, redoes the last operation. Does nothing
+if there is no redo facility.
+
\membersection{wxTextCtrl::Remove}\label{wxtextctrlremove}
\func{virtual void}{Remove}{\param{long}{ from}, \param{long}{ to}}
-Removes the text between the two positions.
+Removes the text starting at the first given position up to (but not including)
+the character at the last position.
\wxheading{Parameters}
\func{virtual void}{Replace}{\param{long}{ from}, \param{long}{ to}, \param{const wxString\& }{value}}
-Replaces the text between two positions with the given text.
+Replaces the text starting at the first position up to (but not including)
+the character at the last position with the given text.
\wxheading{Parameters}
\wxheading{Parameters}
-\docparam{filename}{The name of file in which to save the text.}
+\docparam{filename}{The name of the file in which to save the text.}
\wxheading{Return value}
\func{virtual void}{SetEditable}{\param{const bool}{ editable}}
-Makes the text item editable or read-only.
+Makes the text item editable or read-only, overriding the {\bf wxTE\_READONLY} flag.
\wxheading{Parameters}
\func{virtual void}{SetInsertionPoint}{\param{long}{ pos}}
-Sets the insertion point. Windows only. ??
+Sets the insertion point at the given position.
\wxheading{Parameters}
\func{virtual void}{SetInsertionPointEnd}{\void}
-Sets the insertion point at the end of the text control.
+Sets the insertion point at the end of the text control. This is equivalent
+to \helpref{SetInsertionPoint}{wxtextctrlsetinsertionpoint}(\helpref{GetLastPosition}{wxtextctrlgetlastposition}()).
\membersection{wxTextCtrl::SetSelection}\label{wxtextctrlsetselection}
\func{virtual void}{SetSelection}{\param{long}{ from}, \param{long}{ to}}
-Selects the text between the two positions.
+Selects the text starting at the first position up to (but not including) the character at the last position.
\wxheading{Parameters}
\func{virtual void}{SetValue}{\param{const wxString\& }{ value}}
-Sets the text value.
+Sets the text value and marks the control as not-modified.
\wxheading{Parameters}
\docparam{pos}{The position that should be visible.}
+\membersection{wxTextCtrl::Undo}\label{wxtextctrlundo}
+
+\func{virtual void}{Undo}{\void}
+
+If there is an undo facility and the last operation can be undone, undoes the last operation. Does nothing
+if there is no undo facility.
+
\membersection{wxTextCtrl::WriteText}\label{wxtextctrlwritetext}
\func{void}{WriteText}{\param{const wxString\& }{ text}}
-Writes the text into the text control at the current position.
+Writes the text into the text control at the current insertion position.
\wxheading{Parameters}
Newlines in the text string
are the only control characters allowed, and they will cause appropriate
-line breaks. See \helpref{wxTextCtrl::\cinsert}{wxtextctrlinsert} for more convenient ways of writing to the
-window.
+line breaks. See \helpref{wxTextCtrl::\cinsert}{wxtextctrlinsert} and \helpref{wxTextCtrl::AppendText}{wxtextctrlappendtext} for more convenient ways of writing to the window.
+
+After the write operation, the insertion point will be at the end of the inserted text, so subsequent write operations will be appended. To append text after the user may have interacted with the control, call \helpref{wxTextCtrl::SetInsertionPointEnd}{wxtextctrlsetinsertionpointend} before writing.
\membersection{wxTextCtrl::XYToPosition}\label{wxtextctrlxytoposition}
\func{long}{XYToPosition}{\param{long}{ x}, \param{long}{ y}}
-Converts the given character and line position to a position.
+Converts the given zero based column and line number to a position.
\wxheading{Parameters}
-\docparam{x}{The character position.}
+\docparam{x}{The column number.}
-\docparam{y}{The line position.}
+\docparam{y}{The line number.}
\wxheading{Return value}
\func{wxTextCtrl\&}{operator \cinsert}{\param{char}{ c}}
-Operator definitions for writing to a text control, for example:
+Operator definitions for appending to a text control, for example:
\begin{verbatim}
wxTextCtrl *wnd = new wxTextCtrl(my_frame);
(*wnd) << "Welcome to text control number " << 1 << ".\n";
\end{verbatim}
-
projects / wxWidgets.git / blobdiff