-%define pref %{_prefix}
-%define python @PYTHON@
-%define pyver @PYVER@
-%define debug @DEBUG@
-%define port @PORT@
-%define lcport @LCPORT@
-%define tarname @TARNAME@
-%define version @VERSION@
-%define ver2 2.3
-%define release 1
-%define wxpref %{pref}/lib/wxPython
-
-%if %{debug}
- %define name wxPython%{port}-py%{pyver}-dbg
- %define othername wxPython%{port}-py%{pyver}
-%else
- %define name wxPython%{port}-py%{pyver}
- %define othername wxPython%{port}-py%{pyver}-dbg
+#----------------------------------------------------------------------
+# Name: wxPython.spec
+# Purpose: RPM Build and packaging instructions
+#
+# Author: Robin Dunn
+#
+# RCS-ID: $Id$
+# Copyright: (c) 2004 by Total Control Software
+# Licence: wxWindows license
+#----------------------------------------------------------------------
+
+
+# The following values can be set on the rpmbuild command line with
+# --define 'name VALUE' If no value is set on the command line then
+# the default value set here will be used instead.
+
+
+# Used to set the Release tag below. I normally use it to define what
+# distro the RPM was build on and also include the version of Python
+# it was built with.
+%if %{?release:0}%{!?release:1}
+%define release 1_py%{pyver}
%endif
-#----------------------------------------------------------------
-Summary: Cross platform GUI toolkit for Python using wx%{port}
-Name: %{name}
+# Which wxWidgets port to build and use. Current acceptable valuse
+# are 'gtk' and 'gtk2'.
+%if %{?port:0}%{!?port:1}
+%define port gtk2
+%endif
+
+
+# Build in unicode mode? Can only be used if port is gtk2, acceptable
+# values are '0' and '1'
+%if %{?unicode:0}%{!?unicode:1}
+%define unicode 1
+%endif
+
+# Which version of Python to build with. Used to assemble python
+# binary name so use '2.2', '2.3', etc.
+%if %{?pyver:0}%{!?pyver:1}
+%define pyver 2.3
+%endif
+
+
+
+
+# Should the builtin image and etc. libs be used, or system libs?
+# Distro specific RPMs should probably set this to 0, generic ones
+# should use 1.
+# NOTE: I'm trying 0 for this next release to see if I can get rid of
+# this...
+%if %{?builtin_libs:0}%{!?builtin_libs:1}
+%define builtin_libs 0
+%endif
+
+
+# Should --enable-debug_flag be used in release builds? Using it
+# defines __WXDEBUG__ and gives us runtime diagnostics that are turned
+# into Python exceptions. (So turning it on is a very helpful thing
+# IMO and is recommended.) The code is still compiled with
+# optimization flags and and without debug info and such when this
+# option is used, it simply turns on some extra code.
+%if %{?debug_flag:0}%{!?debug_flag:1}
+%define debug_flag 1
+%endif
+
+
+#----------------------------------------------------------------------
+# Other variables used below
+
+%define pref %{_prefix}
+%define python /usr/bin/python%{pyver}
+%define tarname @TARNAME@
+%define version @VERSION@
+%define ver2 @VER2@
+
+%define chartype %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
+%define gtktype %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
+%define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
+
+%define wxprefbase %{pref}/lib/wxPython
+%define wxpref %{wxprefbase}-%{version}-%{port}-%{chartype}
+%define pkgname wxPython
+
+# turn off the generation of debuginfo rpm (RH9) ??
+%define debug_package %{nil}
+
+
+#----------------------------------------------------------------------
+# Package definition
+#----------------------------------------------------------------------
+Name: %{pkgname}%{ver2}
+Summary: Cross platform GUI toolkit for Python
Version: %{version}
Release: %{release}
Source0: %{tarname}-%{version}.tar.gz
-License: wxWindows Library Licence, Version 3
+License: wx Library Licence, Version 3
URL: http://wxPython.org/
-Packager: Robin Dunn <robind@alldunn.com>
+Packager: Robin Dunn <robin@alldunn.com>
Group: Development/Python
-BuildRoot: %{_tmppath}/%{name}-buildroot
+BuildRoot: %{_tmppath}/%{pkgname}-buildroot
Prefix: %{pref}
-#BuildRequires: %{python}
-Provides: wxwin
-Provides: wx%{port} = %{version}
-Provides: wxPython = %{version}
+%description
+Cross platform GUI toolkit for Python
-# They conflict with each other, so let them replace each other
-Obsoletes: %{othername}
-# old wxPython packages
-Obsoletes: wxPython
-%description
-wxPython is a GUI toolkit for Python that is a wrapper around the
-wxWindows C++ GUI library. wxPython provides a large variety of
-window types and controls, all implemented with a native look and feel
-(and native runtime speed) on the platforms it is supported on.
+%package -n %{pkgname}%{ver2}-%{port}-%{chartype}
+Summary: Cross platform GUI toolkit for Python
+Group: Development/Python
+Requires: %{pkgname}-common
+Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}
+Provides: wxPython
+
+
+%description -n %{pkgname}%{ver2}-%{port}-%{chartype}
+wxPython is a GUI toolkit for the Python programming language. It
+ allows Python programmers to create programs with a robust, highly
+functional graphical user interface, simply and easily. It is
+implemented as a Python extension module (native code) that wraps the
+popular wxWidgets cross platform GUI library, which is written in C++.
+
+wxPython is a cross-platform toolkit. The same program will usually
+run on multiple platforms without modification. Currently supported
+platforms are 32-bit Microsoft Windows, most Unix or unix-like
+systems, and Macintosh OS X.
+
+This package contains the wxPython runtime files built for the
+wxWidgets %{port} port with %{chartype} character type.
-This package is implemented using the %{port} port of wxWindows, and
-includes the wx%{port} shared libs and etc.
-%package devel
-Summary: wxPython%{port} development files
-Group: Development/Libraries
-Requires: wxPython%{port} = %{version}
-%description devel
+%package -n %{pkgname}-common-%{port}-%{chartype}
+Summary: Common files for needed by all wxPython runtimes
+Group: Development/Python
+Provides: %{pkgname}-common
+
+# They obsolete each other so any of them can be installed over another
+# without conflicts
+Obsoletes: %{pkgname}-common-gtk-ansi
+Obsoletes: %{pkgname}-common-gtk2-ansi
+Obsoletes: %{pkgname}-common-gtk2-unicode
+
+%description -n %{pkgname}-common-%{port}-%{chartype}
+This package contains the common files needed by any version of the
+wxPython runtime. This pacakge also installs a wx.pth file which will
+determine which of the installed runtimes is the default version of
+wxPython that is imported automatically with a bare "import wx".
+
+
+
+
+
+%package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
+Summary: wxPython development files
+Group: Development/Libraries
+Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
+
+%description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
This packages contains the headers and etc. for building apps or
-Python extension modules that use the same wx%{port} shared libraries
+Python extension modules that use the same wxWidgets shared libraries
that wxPython uses.
-#----------------------------------------------------------------
+
+
+#----------------------------------------------------------------------
%prep
%setup -q -n %{tarname}-%{version}
-#----------------------------------------------------------------
+#----------------------------------------------------------------------
%build
-if [ "$SMP" != "" ]; then
- MAKE="make -j$SMP"
-else
- MAKE="make"
-fi
-mkdir build
-cd build
+WXDIR=`pwd`
-# Configure, trying to reduce dependencies
-../configure --with-%{lcport} \
+# Configure and build wxWidgets
+mkdir bld
+cd bld
+../configure --with-gtk \
--prefix=%{wxpref} \
- --disable-soname \
+ --enable-monolithic \
+ --enable-rpath=%{wxpref}/lib \
--with-opengl \
-%if %{debug}
- --enable-debug \
-%else
+ --enable-geometry \
--enable-optimise \
+ --enable-sound --with-sdl \
+ --enable-display \
+%if %{using_gtk1}
+ --disable-gtk2 \
+%else
+ --enable-gtk2 \
+%endif
+%if %{unicode}
+ --enable-unicode \
+%endif
+%if %{debug_flag}
+ --enable-debug_flag \
%endif
+%if %{builtin_libs}
--with-libjpeg=builtin \
--with-libpng=builtin \
--with-libtiff=builtin \
--with-zlib=builtin \
+%endif
-## --enable-debug_flag \
-## --with-odbc \
+make
+make -C contrib/src/gizmos
+make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0"
+make -C contrib/src/stc
-# Build wxWindows
-$MAKE
-cd ../locale
-make allmo
+# Build wxPython
+cd $WXDIR/wxPython
+%{python} setup.py \
+ WXPORT=%{port} \
+ UNICODE=%{unicode} \
+ EP_ADD_OPTS=1 \
+ NO_SCRIPTS=1 \
+ WX_CONFIG="$WXDIR/bld/wx-config --inplace" \
+ build
-# ** Unfortunately we have to do a bit of installation here so wxPython
-# can be built. Perhaps wx-config should be changed to be able to be
-# used from the build dir, maybe with an --inplace flag... Move these
-# three lines to %install if/when that happens.
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-cd ../build
-make prefix=$RPM_BUILD_ROOT%{wxpref} install
-# Now build wxPython
-cd ../wxPython
-%{python} setup.py \
- IN_CVS_TREE=1 \
- WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \
- build
+#----------------------------------------------------------------------
+%install
+WXDIR=`pwd`
-#----------------------------------------------------------------
-%install
-## ** [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-%find_lang wxstd
-cd wxPython
+# Install wxGTK and contribs
+cd bld
+make prefix=$RPM_BUILD_ROOT%{wxpref} install
+make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
+make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" prefix=$RPM_BUILD_ROOT%{wxpref} install
+make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
+
+
+
+# Install wxPython for wxGTK
+cd $WXDIR/wxPython
%{python} setup.py \
- IN_CVS_TREE=1 \
+ WXPORT=%{port} \
+ UNICODE=%{unicode} \
+ EP_ADD_OPTS=1 \
+ NO_SCRIPTS=1 \
WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \
install \
--root=$RPM_BUILD_ROOT
+# remove the wx-config symlink, we'll redo it when installing the -devel package
+rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
+
+# make sure that debug info is stripped
+strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
+
+
+# Since I want this RPM to be as generic as possible I won't let
+# distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
+# the #! line to use the real python pathname. Since some distros
+# install python 2.2 as python2 and others as python I can't let
+# distutils do that otherwise the dependencies will be fouled up.
+# Copy them manually instead, leaving the #!/usr/bin/env line intact.
+cd $WXDIR/wxPython
+mkdir -p $RPM_BUILD_ROOT%{pref}/bin
+for s in \
+ helpviewer \
+ img2png \
+ img2py \
+ img2xpm \
+ pyalacarte \
+ pyalamode \
+ pycrust \
+ pywrap \
+ pyshell \
+ pywxrc \
+ xrced; do
+ cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
+done
+
+
+
+# install KDE & GNOME menu items
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
+for d in distrib/*.desktop; do
+ install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
+ install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
+done
+
+# install KDE icons
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
+install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
+install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
+install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
+install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
+install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
+install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
+
+# install Mandrake menu items
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
+cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
+?package(%{pkgname}): \\
+ command="%{_bindir}/pyshell" \\
+ needs="X11" \\
+ icon="PyCrust.png" \\
+ section="Applications/Development/Tools" \\
+ title="PyShell" \\
+ longtitle="GUI Python Shell"
+?package(%{pkgname}): \\
+ command="%{_bindir}/pycrust" \\
+ needs="X11" \\
+ icon="PyCrust.png" \\
+ section="Applications/Development/Tools" \\
+ title="PyCrust" \\
+ longtitle="GUI Python Shell with Filling"
+?package(%{pkgname}): \\
+ command="%{_bindir}/pyalamode" \\
+ needs="X11" \\
+ icon="PyCrust.png" \\
+ section="Applications/Development/Tools" \\
+ title="PyAlaMode" \\
+ longtitle="GUI Python Shell with Filling and editor windows"
+?package(%{pkgname}): \\
+ command="%{_bindir}/xrced" \\
+ needs="X11" \\
+ icon="XRCed.png" \\
+ section="Applications/Development/Tools" \\
+ title="XRCed" \\
+ longtitle="wxPython XRC resource editor"
+EOF
+
+
+#----------------------------------------------------------------------
+
+%post -n %{pkgname}%{ver2}-%{port}-%{chartype}
+if [ ! -e %{wxprefbase} ]; then
+ ln -s %{pkgname}-%{version}-%{port}-%{chartype} %{wxprefbase}
+fi
-#----------------------------------------------------------------
-%clean
-#[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+%preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
+if [ -L %{wxprefbase} ]; then
+ if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
+ rm -f %{wxprefbase}
+ fi
+fi
+
+
+
+
+%post -n %{pkgname}-common-%{port}-%{chartype}
+# This is done on Mandrake to update its menus:
+if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+%postun -n %{pkgname}-common-%{port}-%{chartype}
+# This is done on Mandrake to update its menus:
+if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+
+
+%post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
+cd %{wxpref}/bin
+ln -s ../lib/wx/config/%{port}-%{chartype}* wx-config
+%preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
+rm %{wxpref}/bin/wx-config
-#----------------------------------------------------------------
-%post
-/sbin/ldconfig
+
+#----------------------------------------------------------------------
+%clean
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-#----------------------------------------------------------------
-%postun
-/sbin/ldconfig
+#----------------------------------------------------------------------
+
+%files -n %{pkgname}%{ver2}-%{port}-%{chartype}
+%defattr(-,root,root)
+%doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
+%doc wxPython/docs/*
+%dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
+%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
+%dir %{wxpref}
+%dir %{wxpref}/lib
+%{wxpref}/lib/libwx_gtk*
+%{wxpref}/share
-#----------------------------------------------------------------
-%files
-%doc docs/preamble.txt
-%doc docs/licence.txt
-%doc docs/readme.txt
-%doc docs/changes.txt
-%doc wxPython/README.txt
-%doc wxPython/CHANGES.txt
+%files -n %{pkgname}-common-%{port}-%{chartype}
%defattr(-,root,root)
-%{wxpref}/lib/libwx*
-%{pref}/lib/python*
-%{wxpref}/share/
+%{pref}/lib*/python%{pyver}/site-packages/wxversion.*
+%{pref}/lib*/python%{pyver}/site-packages/wx.pth
+%{_bindir}/*
+%{_datadir}/applnk/Development/*
+%{_datadir}/applications/*
+%{_datadir}/icons/hicolor/*/apps/*
+%{_datadir}/pixmaps/*
+%{_libdir}/menu/*
-%files devel
+
+
+%files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
%defattr(-,root,root)
-%{wxpref}/include/wx
+%{wxpref}/include
%{wxpref}/lib/wx
-%if %{debug}
- %{wxpref}/bin/wx%{lcport}d-%{ver2}-config
-%else
- %{wxpref}/bin/wx%{lcport}-%{ver2}-config
-%endif
-%{wxpref}/bin/wx-config
-
+%dir %{wxpref}/bin
-#----------------------------------------------------------------
-%changelog
+#----------------------------------------------------------------------
# end of file
projects / wxWidgets.git / blobdiff