Note that VMS uses different separators unlike Unix:
: always after the device. If the path does not contain : than
the default (the device of the current directory) is assumed.
- [ start of directory specyfication
+ [ start of directory specification
. separator between directory and subdirectory
] between directory and file
*/
// headers
// ----------------------------------------------------------------------------
-#if defined(__GNUG__) && !defined(NO_GCC_PRAGMA)
-#pragma implementation "filename.h"
-#endif
-
// For compilers that support precompilation, includes "wx.h".
#include "wx/wxprec.h"
#endif
#ifndef WX_PRECOMP
-#include "wx/intl.h"
-#include "wx/log.h"
-#include "wx/file.h"
+ #ifdef __WXMSW__
+ #include "wx/msw/wrapwin.h" // For GetShort/LongPathName
+ #endif
+ #include "wx/dynarray.h"
+ #include "wx/intl.h"
+ #include "wx/log.h"
+ #include "wx/utils.h"
+ #include "wx/crt.h"
#endif
#include "wx/filename.h"
+#include "wx/private/filename.h"
#include "wx/tokenzr.h"
#include "wx/config.h" // for wxExpandEnvVars
-#include "wx/utils.h"
-#include "wx/file.h"
#include "wx/dynlib.h"
-// For GetShort/LongPathName
-#ifdef __WIN32__
-#include "wx/msw/wrapwin.h"
+#if defined(__WIN32__) && defined(__MINGW32__)
+ #include "wx/msw/gccpriv.h"
#endif
#ifdef __WXWINCE__
#endif
#if defined(__WXMAC__)
- #include "wx/mac/private.h" // includes mac headers
+ #include "wx/osx/private.h" // includes mac headers
#endif
// utime() is POSIX so should normally be available on all Unices
#define MAX_PATH _MAX_PATH
#endif
+
+#if wxUSE_LONGLONG
+extern const wxULongLong wxInvalidSize = (unsigned)-1;
+#endif // wxUSE_LONGLONG
+
+
// ----------------------------------------------------------------------------
// private classes
// ----------------------------------------------------------------------------
{
m_hFile = ::CreateFile
(
- filename, // name
+ filename.fn_str(), // name
mode == Read ? GENERIC_READ // access mask
: GENERIC_WRITE,
- 0, // no sharing
+ FILE_SHARE_READ | // sharing mode
+ FILE_SHARE_WRITE, // (allow everything)
NULL, // no secutity attr
OPEN_EXISTING, // creation disposition
0, // no flags
if ( m_hFile == INVALID_HANDLE_VALUE )
{
- wxLogSysError(_("Failed to open '%s' for %s"),
- filename.c_str(),
- mode == Read ? _("reading") : _("writing"));
+ if ( mode == Read )
+ wxLogSysError(_("Failed to open '%s' for reading"),
+ filename.c_str());
+ else
+ wxLogSysError(_("Failed to open '%s' for writing"),
+ filename.c_str());
}
}
{
SYSTEMTIME st;
st.wDay = dt.GetDay();
- st.wMonth = dt.GetMonth() + 1;
- st.wYear = dt.GetYear();
+ st.wMonth = (WORD)(dt.GetMonth() + 1);
+ st.wYear = (WORD)dt.GetYear();
st.wHour = dt.GetHour();
st.wMinute = dt.GetMinute();
st.wSecond = dt.GetSecond();
return path;
}
+// return true if the format used is the DOS/Windows one and the string looks
+// like a UNC path
+static bool IsUNCPath(const wxString& path, wxPathFormat format)
+{
+ return format == wxPATH_DOS &&
+ path.length() >= 4 && // "\\a" can't be a UNC path
+ path[0u] == wxFILE_SEP_PATH_DOS &&
+ path[1u] == wxFILE_SEP_PATH_DOS &&
+ path[2u] != wxFILE_SEP_PATH_DOS;
+}
+
// ============================================================================
// implementation
// ============================================================================
m_name = filepath.GetName();
m_ext = filepath.GetExt();
m_relative = filepath.m_relative;
+ m_hasExt = filepath.m_hasExt;
}
void wxFileName::Assign(const wxString& volume,
const wxString& path,
const wxString& name,
const wxString& ext,
- wxPathFormat format )
+ bool hasExt,
+ wxPathFormat format)
{
- SetPath( path, format );
+ // we should ignore paths which look like UNC shares because we already
+ // have the volume here and the UNC notation (\\server\path) is only valid
+ // for paths which don't start with a volume, so prevent SetPath() from
+ // recognizing "\\foo\bar" in "c:\\foo\bar" as an UNC path
+ //
+ // note also that this is a rather ugly way to do what we want (passing
+ // some kind of flag telling to ignore UNC paths to SetPath() would be
+ // better) but this is the safest thing to do to avoid breaking backwards
+ // compatibility in 2.8
+ if ( IsUNCPath(path, format) )
+ {
+ // remove one of the 2 leading backslashes to ensure that it's not
+ // recognized as an UNC path by SetPath()
+ wxString pathNonUNC(path, 1, wxString::npos);
+ SetPath(pathNonUNC, format);
+ }
+ else // no UNC complications
+ {
+ SetPath(path, format);
+ }
m_volume = volume;
m_ext = ext;
m_name = name;
+
+ m_hasExt = hasExt;
}
-void wxFileName::SetPath( const wxString &path, wxPathFormat format )
+void wxFileName::SetPath( const wxString& pathOrig, wxPathFormat format )
{
m_dirs.Clear();
- if ( !path.empty() )
+ if ( pathOrig.empty() )
{
- wxPathFormat my_format = GetFormat( format );
- wxString my_path = path;
+ // no path at all
+ m_relative = true;
- // 1) Determine if the path is relative or absolute.
- wxChar leadingChar = my_path[0u];
+ return;
+ }
- switch (my_format)
- {
- case wxPATH_MAC:
- m_relative = leadingChar == wxT(':');
-
- // We then remove a leading ":". The reason is in our
- // storage form for relative paths:
- // ":dir:file.txt" actually means "./dir/file.txt" in
- // DOS notation and should get stored as
- // (relative) (dir) (file.txt)
- // "::dir:file.txt" actually means "../dir/file.txt"
- // stored as (relative) (..) (dir) (file.txt)
- // This is important only for the Mac as an empty dir
- // actually means <UP>, whereas under DOS, double
- // slashes can be ignored: "\\\\" is the same as "\\".
- if (m_relative)
- my_path.erase( 0, 1 );
- break;
+ format = GetFormat( format );
- case wxPATH_VMS:
- // TODO: what is the relative path format here?
- m_relative = false;
- break;
+ // 0) deal with possible volume part first
+ wxString volume,
+ path;
+ SplitVolume(pathOrig, &volume, &path, format);
+ if ( !volume.empty() )
+ {
+ m_relative = false;
- default:
- wxFAIL_MSG( _T("Unknown path format") );
- // !! Fall through !!
+ SetVolume(volume);
+ }
- case wxPATH_UNIX:
- // the paths of the form "~" or "~username" are absolute
- m_relative = leadingChar != wxT('/') && leadingChar != _T('~');
- break;
+ // 1) Determine if the path is relative or absolute.
+ wxChar leadingChar = path[0u];
- case wxPATH_DOS:
- m_relative = !IsPathSeparator(leadingChar, my_format);
- break;
+ switch (format)
+ {
+ case wxPATH_MAC:
+ m_relative = leadingChar == wxT(':');
+
+ // We then remove a leading ":". The reason is in our
+ // storage form for relative paths:
+ // ":dir:file.txt" actually means "./dir/file.txt" in
+ // DOS notation and should get stored as
+ // (relative) (dir) (file.txt)
+ // "::dir:file.txt" actually means "../dir/file.txt"
+ // stored as (relative) (..) (dir) (file.txt)
+ // This is important only for the Mac as an empty dir
+ // actually means <UP>, whereas under DOS, double
+ // slashes can be ignored: "\\\\" is the same as "\\".
+ if (m_relative)
+ path.erase( 0, 1 );
+ break;
- }
+ case wxPATH_VMS:
+ // TODO: what is the relative path format here?
+ m_relative = false;
+ break;
- // 2) Break up the path into its members. If the original path
- // was just "/" or "\\", m_dirs will be empty. We know from
- // the m_relative field, if this means "nothing" or "root dir".
+ default:
+ wxFAIL_MSG( _T("Unknown path format") );
+ // !! Fall through !!
- wxStringTokenizer tn( my_path, GetPathSeparators(my_format) );
+ case wxPATH_UNIX:
+ // the paths of the form "~" or "~username" are absolute
+ m_relative = leadingChar != wxT('/') && leadingChar != _T('~');
+ break;
- while ( tn.HasMoreTokens() )
- {
- wxString token = tn.GetNextToken();
+ case wxPATH_DOS:
+ m_relative = !IsPathSeparator(leadingChar, format);
+ break;
- // Remove empty token under DOS and Unix, interpret them
- // as .. under Mac.
- if (token.empty())
- {
- if (my_format == wxPATH_MAC)
- m_dirs.Add( wxT("..") );
- // else ignore
- }
- else
- {
- m_dirs.Add( token );
- }
- }
}
- else // no path at all
+
+ // 2) Break up the path into its members. If the original path
+ // was just "/" or "\\", m_dirs will be empty. We know from
+ // the m_relative field, if this means "nothing" or "root dir".
+
+ wxStringTokenizer tn( path, GetPathSeparators(format) );
+
+ while ( tn.HasMoreTokens() )
{
- m_relative = true;
+ wxString token = tn.GetNextToken();
+
+ // Remove empty token under DOS and Unix, interpret them
+ // as .. under Mac.
+ if (token.empty())
+ {
+ if (format == wxPATH_MAC)
+ m_dirs.Add( wxT("..") );
+ // else ignore
+ }
+ else
+ {
+ m_dirs.Add( token );
+ }
}
}
wxPathFormat format)
{
wxString volume, path, name, ext;
- SplitPath(fullpath, &volume, &path, &name, &ext, format);
+ bool hasExt;
+ SplitPath(fullpath, &volume, &path, &name, &ext, &hasExt, format);
- Assign(volume, path, name, ext, format);
+ Assign(volume, path, name, ext, hasExt, format);
}
void wxFileName::Assign(const wxString& fullpathOrig,
// always recognize fullpath as directory, even if it doesn't end with a
// slash
wxString fullpath = fullpathOrig;
- if ( !wxEndsWithPathSeparator(fullpath) )
+ if ( !fullpath.empty() && !wxEndsWithPathSeparator(fullpath) )
{
fullpath += GetPathSeparator(format);
}
wxString volume, path, name, ext;
+ bool hasExt;
// do some consistency checks in debug mode: the name should be really just
// the filename and the path should be really just a path
#ifdef __WXDEBUG__
- wxString pathDummy, nameDummy, extDummy;
+ wxString volDummy, pathDummy, nameDummy, extDummy;
- SplitPath(fullname, &pathDummy, &name, &ext, format);
+ SplitPath(fullname, &volDummy, &pathDummy, &name, &ext, &hasExt, format);
- wxASSERT_MSG( pathDummy.empty(),
+ wxASSERT_MSG( volDummy.empty() && pathDummy.empty(),
_T("the file name shouldn't contain the path") );
SplitPath(fullpath, &volume, &path, &nameDummy, &extDummy, format);
_T("the path shouldn't contain file name nor extension") );
#else // !__WXDEBUG__
- SplitPath(fullname, NULL /* no path */, &name, &ext, format);
+ SplitPath(fullname, NULL /* no volume */, NULL /* no path */,
+ &name, &ext, &hasExt, format);
SplitPath(fullpath, &volume, &path, NULL, NULL, format);
#endif // __WXDEBUG__/!__WXDEBUG__
+ Assign(volume, path, name, ext, hasExt, format);
+}
+
+void wxFileName::Assign(const wxString& pathOrig,
+ const wxString& name,
+ const wxString& ext,
+ wxPathFormat format)
+{
+ wxString volume,
+ path;
+ SplitVolume(pathOrig, &volume, &path, format);
+
Assign(volume, path, name, ext, format);
}
void wxFileName::AssignDir(const wxString& dir, wxPathFormat format)
{
- Assign(dir, _T(""), format);
+ Assign(dir, wxEmptyString, format);
}
void wxFileName::Clear()
// we don't have any absolute path for now
m_relative = true;
+
+ // nor any extension
+ m_hasExt = false;
}
/* static */
bool wxFileName::DirExists() const
{
- return wxFileName::DirExists( GetFullPath() );
+ return wxFileName::DirExists( GetPath() );
}
bool wxFileName::DirExists( const wxString &dir )
bool wxFileName::SetCwd()
{
- return wxFileName::SetCwd( GetFullPath() );
+ return wxFileName::SetCwd( GetPath() );
}
bool wxFileName::SetCwd( const wxString &cwd )
return ::wxGetHomeDir();
}
-void wxFileName::AssignTempFileName(const wxString& prefix, wxFile *fileTemp)
+
+// ----------------------------------------------------------------------------
+// CreateTempFileName
+// ----------------------------------------------------------------------------
+
+#if wxUSE_FILE || wxUSE_FFILE
+
+
+#if !defined wx_fdopen && defined HAVE_FDOPEN
+ #define wx_fdopen fdopen
+#endif
+
+// NB: GetTempFileName() under Windows creates the file, so using
+// O_EXCL there would fail
+#ifdef __WINDOWS__
+ #define wxOPEN_EXCL 0
+#else
+ #define wxOPEN_EXCL O_EXCL
+#endif
+
+
+#ifdef wxOpenOSFHandle
+#define WX_HAVE_DELETE_ON_CLOSE
+// On Windows create a file with the FILE_FLAGS_DELETE_ON_CLOSE flags.
+//
+static int wxOpenWithDeleteOnClose(const wxString& filename)
{
- wxString tempname = CreateTempFileName(prefix, fileTemp);
- if ( tempname.empty() )
- {
- // error, failed to get temp file name
- Clear();
- }
- else // ok
- {
- Assign(tempname);
- }
+ DWORD access = GENERIC_READ | GENERIC_WRITE;
+
+ DWORD disposition = OPEN_ALWAYS;
+
+ DWORD attributes = FILE_ATTRIBUTE_TEMPORARY |
+ FILE_FLAG_DELETE_ON_CLOSE;
+
+ HANDLE h = ::CreateFile(filename.fn_str(), access, 0, NULL,
+ disposition, attributes, NULL);
+
+ return wxOpenOSFHandle(h, wxO_BINARY);
}
+#endif // wxOpenOSFHandle
-/* static */
-wxString
-wxFileName::CreateTempFileName(const wxString& prefix, wxFile *fileTemp)
+
+// Helper to open the file
+//
+static int wxTempOpen(const wxString& path, bool *deleteOnClose)
+{
+#ifdef WX_HAVE_DELETE_ON_CLOSE
+ if (*deleteOnClose)
+ return wxOpenWithDeleteOnClose(path);
+#endif
+
+ *deleteOnClose = false;
+
+ return wxOpen(path, wxO_BINARY | O_RDWR | O_CREAT | wxOPEN_EXCL, 0600);
+}
+
+
+#if wxUSE_FFILE
+// Helper to open the file and attach it to the wxFFile
+//
+static bool wxTempOpen(wxFFile *file, const wxString& path, bool *deleteOnClose)
+{
+#ifndef wx_fdopen
+ *deleteOnClose = false;
+ return file->Open(path, _T("w+b"));
+#else // wx_fdopen
+ int fd = wxTempOpen(path, deleteOnClose);
+ if (fd == -1)
+ return false;
+ file->Attach(wx_fdopen(fd, "w+b"));
+ return file->IsOpened();
+#endif // wx_fdopen
+}
+#endif // wxUSE_FFILE
+
+
+#if !wxUSE_FILE
+ #define WXFILEARGS(x, y) y
+#elif !wxUSE_FFILE
+ #define WXFILEARGS(x, y) x
+#else
+ #define WXFILEARGS(x, y) x, y
+#endif
+
+
+// Implementation of wxFileName::CreateTempFileName().
+//
+static wxString wxCreateTempImpl(
+ const wxString& prefix,
+ WXFILEARGS(wxFile *fileTemp, wxFFile *ffileTemp),
+ bool *deleteOnClose = NULL)
{
+#if wxUSE_FILE && wxUSE_FFILE
+ wxASSERT(fileTemp == NULL || ffileTemp == NULL);
+#endif
wxString path, dir, name;
+ bool wantDeleteOnClose = false;
+
+ if (deleteOnClose)
+ {
+ // set the result to false initially
+ wantDeleteOnClose = *deleteOnClose;
+ *deleteOnClose = false;
+ }
+ else
+ {
+ // easier if it alwasys points to something
+ deleteOnClose = &wantDeleteOnClose;
+ }
// use the directory specified by the prefix
- SplitPath(prefix, &dir, &name, NULL /* extension */);
+ wxFileName::SplitPath(prefix, &dir, &name, NULL /* extension */);
-#if defined(__WXWINCE__)
if (dir.empty())
{
- // FIXME. Create \temp dir?
- dir = wxT("\\");
+ dir = wxFileName::GetTempDir();
}
- path = dir + wxT("\\") + prefix;
+
+#if defined(__WXWINCE__)
+ path = dir + wxT("\\") + name;
int i = 1;
- while (wxFileExists(path))
+ while (wxFileName::FileExists(path))
{
- path = dir + wxT("\\") + prefix ;
+ path = dir + wxT("\\") + name ;
path << i;
i ++;
}
#elif defined(__WINDOWS__) && !defined(__WXMICROWIN__)
-#ifdef __WIN32__
- if ( dir.empty() )
- {
- if ( !::GetTempPath(MAX_PATH, wxStringBuffer(dir, MAX_PATH + 1)) )
- {
- wxLogLastError(_T("GetTempPath"));
- }
-
- if ( dir.empty() )
- {
- // GetTempFileName() fails if we pass it an empty string
- dir = _T('.');
- }
- }
- else // we have a dir to create the file in
- {
- // ensure we use only the back slashes as GetTempFileName(), unlike all
- // the other APIs, is picky and doesn't accept the forward ones
- dir.Replace(_T("/"), _T("\\"));
- }
-
- if ( !::GetTempFileName(dir, name, 0, wxStringBuffer(path, MAX_PATH + 1)) )
+ if ( !::GetTempFileName(dir.fn_str(), name.fn_str(), 0,
+ wxStringBuffer(path, MAX_PATH + 1)) )
{
wxLogLastError(_T("GetTempFileName"));
path.clear();
}
-#else // Win16
- if ( !::GetTempFileName(NULL, prefix, 0, wxStringBuffer(path, 1025)) )
- {
- path.clear();
- }
-#endif // Win32/16
#else // !Windows
- if ( dir.empty() )
- {
-#if defined(__WXMAC__) && !defined(__DARWIN__)
- dir = wxMacFindFolder( (short) kOnSystemDisk, kTemporaryFolderType, kCreateFolder ) ;
-#else // !Mac
- dir = wxGetenv(_T("TMP"));
- if ( dir.empty() )
- {
- dir = wxGetenv(_T("TEMP"));
- }
-
- if ( dir.empty() )
- {
- // default
- #if defined(__DOS__) || defined(__OS2__)
- dir = _T(".");
- #else
- dir = _T("/tmp");
- #endif
- }
-#endif // Mac/!Mac
- }
-
path = dir;
if ( !wxEndsWithPathSeparator(dir) &&
path += _T("XXXXXX");
// we need to copy the path to the buffer in which mkstemp() can modify it
- wxCharBuffer buf( wxConvFile.cWX2MB( path ) );
+ wxCharBuffer buf(path.fn_str());
// cast is safe because the string length doesn't change
int fdTemp = mkstemp( (char*)(const char*) buf );
else // mkstemp() succeeded
{
path = wxConvFile.cMB2WX( (const char*) buf );
-
+
+ #if wxUSE_FILE
// avoid leaking the fd
if ( fileTemp )
{
fileTemp->Attach(fdTemp);
}
else
+ #endif
+
+ #if wxUSE_FFILE
+ if ( ffileTemp )
+ {
+ #ifdef wx_fdopen
+ ffileTemp->Attach(wx_fdopen(fdTemp, "r+b"));
+ #else
+ ffileTemp->Open(path, _T("r+b"));
+ close(fdTemp);
+ #endif
+ }
+ else
+ #endif
+
{
close(fdTemp);
}
path += _T("XXXXXX");
wxCharBuffer buf = wxConvFile.cWX2MB( path );
- if ( !mktemp( (const char*) buf ) )
+ if ( !mktemp( (char*)(const char*) buf ) )
{
path.clear();
}
}
#else // !HAVE_MKTEMP (includes __DOS__)
// generate the unique file name ourselves
- #if !defined(__DOS__) && (!defined(__MWERKS__) || defined(__DARWIN__) )
+ #if !defined(__DOS__) && !defined(__PALMOS__) && (!defined(__MWERKS__) || defined(__DARWIN__) )
path << (unsigned int)getpid();
#endif
{
// 3 hex digits is enough for numTries == 1000 < 4096
pathTry = path + wxString::Format(_T("%.03x"), (unsigned int) n);
- if ( !wxFile::Exists(pathTry) )
+ if ( !wxFileName::FileExists(pathTry) )
{
break;
}
path = pathTry;
#endif // HAVE_MKTEMP/!HAVE_MKTEMP
- if ( !path.empty() )
- {
- }
#endif // HAVE_MKSTEMP/!HAVE_MKSTEMP
#endif // Windows/!Windows
{
wxLogSysError(_("Failed to create a temporary file name"));
}
- else if ( fileTemp && !fileTemp->IsOpened() )
+ else
{
+ bool ok = true;
+
// open the file - of course, there is a race condition here, this is
// why we always prefer using mkstemp()...
- //
- // NB: GetTempFileName() under Windows creates the file, so using
- // write_excl there would fail
- if ( !fileTemp->Open(path,
-#if defined(__WINDOWS__) && !defined(__WXMICROWIN__)
- wxFile::write,
-#else
- wxFile::write_excl,
-#endif
- wxS_IRUSR | wxS_IWUSR) )
+ #if wxUSE_FILE
+ if ( fileTemp && !fileTemp->IsOpened() )
+ {
+ *deleteOnClose = wantDeleteOnClose;
+ int fd = wxTempOpen(path, deleteOnClose);
+ if (fd != -1)
+ fileTemp->Attach(fd);
+ else
+ ok = false;
+ }
+ #endif
+
+ #if wxUSE_FFILE
+ if ( ffileTemp && !ffileTemp->IsOpened() )
+ {
+ *deleteOnClose = wantDeleteOnClose;
+ ok = wxTempOpen(ffileTemp, path, deleteOnClose);
+ }
+ #endif
+
+ if ( !ok )
{
// FIXME: If !ok here should we loop and try again with another
// file name? That is the standard recourse if open(O_EXCL)
return path;
}
+
+static bool wxCreateTempImpl(
+ const wxString& prefix,
+ WXFILEARGS(wxFile *fileTemp, wxFFile *ffileTemp),
+ wxString *name)
+{
+ bool deleteOnClose = true;
+
+ *name = wxCreateTempImpl(prefix,
+ WXFILEARGS(fileTemp, ffileTemp),
+ &deleteOnClose);
+
+ bool ok = !name->empty();
+
+ if (deleteOnClose)
+ name->clear();
+#ifdef __UNIX__
+ else if (ok && wxRemoveFile(*name))
+ name->clear();
+#endif
+
+ return ok;
+}
+
+
+static void wxAssignTempImpl(
+ wxFileName *fn,
+ const wxString& prefix,
+ WXFILEARGS(wxFile *fileTemp, wxFFile *ffileTemp))
+{
+ wxString tempname;
+ tempname = wxCreateTempImpl(prefix, WXFILEARGS(fileTemp, ffileTemp));
+
+ if ( tempname.empty() )
+ {
+ // error, failed to get temp file name
+ fn->Clear();
+ }
+ else // ok
+ {
+ fn->Assign(tempname);
+ }
+}
+
+
+void wxFileName::AssignTempFileName(const wxString& prefix)
+{
+ wxAssignTempImpl(this, prefix, WXFILEARGS(NULL, NULL));
+}
+
+/* static */
+wxString wxFileName::CreateTempFileName(const wxString& prefix)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(NULL, NULL));
+}
+
+#endif // wxUSE_FILE || wxUSE_FFILE
+
+
+#if wxUSE_FILE
+
+wxString wxCreateTempFileName(const wxString& prefix,
+ wxFile *fileTemp,
+ bool *deleteOnClose)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(fileTemp, NULL), deleteOnClose);
+}
+
+bool wxCreateTempFile(const wxString& prefix,
+ wxFile *fileTemp,
+ wxString *name)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(fileTemp, NULL), name);
+}
+
+void wxFileName::AssignTempFileName(const wxString& prefix, wxFile *fileTemp)
+{
+ wxAssignTempImpl(this, prefix, WXFILEARGS(fileTemp, NULL));
+}
+
+/* static */
+wxString
+wxFileName::CreateTempFileName(const wxString& prefix, wxFile *fileTemp)
+{
+ return wxCreateTempFileName(prefix, fileTemp);
+}
+
+#endif // wxUSE_FILE
+
+
+#if wxUSE_FFILE
+
+wxString wxCreateTempFileName(const wxString& prefix,
+ wxFFile *fileTemp,
+ bool *deleteOnClose)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(NULL, fileTemp), deleteOnClose);
+}
+
+bool wxCreateTempFile(const wxString& prefix,
+ wxFFile *fileTemp,
+ wxString *name)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(NULL, fileTemp), name);
+
+}
+
+void wxFileName::AssignTempFileName(const wxString& prefix, wxFFile *fileTemp)
+{
+ wxAssignTempImpl(this, prefix, WXFILEARGS(NULL, fileTemp));
+}
+
+/* static */
+wxString
+wxFileName::CreateTempFileName(const wxString& prefix, wxFFile *fileTemp)
+{
+ return wxCreateTempFileName(prefix, fileTemp);
+}
+
+#endif // wxUSE_FFILE
+
+
// ----------------------------------------------------------------------------
// directory operations
// ----------------------------------------------------------------------------
+// helper of GetTempDir(): check if the given directory exists and return it if
+// it does or an empty string otherwise
+namespace
+{
+
+wxString CheckIfDirExists(const wxString& dir)
+{
+ return wxFileName::DirExists(dir) ? dir : wxString();
+}
+
+} // anonymous namespace
+
+wxString wxFileName::GetTempDir()
+{
+ // first try getting it from environment: this allows overriding the values
+ // used by default if the user wants to create temporary files in another
+ // directory
+ wxString dir = CheckIfDirExists(wxGetenv("TMPDIR"));
+ if ( dir.empty() )
+ {
+ dir = CheckIfDirExists(wxGetenv("TMP"));
+ if ( dir.empty() )
+ dir = CheckIfDirExists(wxGetenv("TEMP"));
+ }
+
+ // if no environment variables are set, use the system default
+ if ( dir.empty() )
+ {
+#if defined(__WXWINCE__)
+ dir = CheckIfDirExists(wxT("\\temp"));
+#elif defined(__WINDOWS__) && !defined(__WXMICROWIN__)
+ if ( !::GetTempPath(MAX_PATH, wxStringBuffer(dir, MAX_PATH + 1)) )
+ {
+ wxLogLastError(_T("GetTempPath"));
+ }
+#elif defined(__WXMAC__) && wxOSX_USE_CARBON
+ dir = wxMacFindFolder(short(kOnSystemDisk), kTemporaryFolderType, kCreateFolder);
+#endif // systems with native way
+ }
+
+ // fall back to hard coded value
+ if ( dir.empty() )
+ {
+#ifdef __UNIX_LIKE__
+ dir = CheckIfDirExists("/tmp");
+ if ( dir.empty() )
+#endif // __UNIX_LIKE__
+ dir = ".";
+ }
+
+ return dir;
+}
+
bool wxFileName::Mkdir( int perm, int flags )
{
- return wxFileName::Mkdir( GetFullPath(), perm, flags );
+ return wxFileName::Mkdir(GetPath(), perm, flags);
}
bool wxFileName::Mkdir( const wxString& dir, int perm, int flags )
size_t count = dirs.GetCount();
for ( size_t i = 0; i < count; i++ )
{
- if ( i > 0 ||
-#if defined(__WXMAC__) && !defined(__DARWIN__)
- // relative pathnames are exactely the other way round under mac...
- !filename.IsAbsolute()
-#else
- filename.IsAbsolute()
-#endif
- )
+ if ( i > 0 || filename.IsAbsolute() )
currPath += wxFILE_SEP_PATH;
currPath += dirs[i];
bool wxFileName::Rmdir()
{
- return wxFileName::Rmdir( GetFullPath() );
+ return wxFileName::Rmdir( GetPath() );
}
bool wxFileName::Rmdir( const wxString &dir )
format = GetFormat(format);
- // make the path absolute
+ // set up the directory to use for making the path absolute later
if ( (flags & wxPATH_NORM_ABSOLUTE) && !IsAbsolute(format) )
{
if ( cwd.empty() )
{
curDir.AssignDir(cwd);
}
-
- // the path may be not absolute because it doesn't have the volume name
- // but in this case we shouldn't modify the directory components of it
- // but just set the current volume
- if ( !HasVolume() && curDir.HasVolume() )
- {
- SetVolume(curDir.GetVolume());
-
- if ( !m_relative )
- {
- // yes, it was the case - we don't need curDir then
- curDir.Clear();
- }
- }
}
// handle ~ stuff under Unix only
wxString dir = dirs[0u];
if ( !dir.empty() && dir[0u] == _T('~') )
{
+ // to make the path absolute use the home directory
curDir.AssignDir(wxGetUserHome(dir.c_str() + 1));
+ // if we are expanding the tilde, then this path
+ // *should* be already relative (since we checked for
+ // the tilde only in the first char of the first dir);
+ // if m_relative==false, it's because it was initialized
+ // from a string which started with /~; in that case
+ // we reach this point but then need m_relative=true
+ // for relative->absolute expansion later
+ m_relative = true;
+
dirs.RemoveAt(0u);
}
}
// transform relative path into abs one
if ( curDir.IsOk() )
{
- wxArrayString dirsNew = curDir.GetDirs();
- size_t count = dirs.GetCount();
- for ( size_t n = 0; n < count; n++ )
+ // this path may be relative because it doesn't have the volume name
+ // and still have m_relative=true; in this case we shouldn't modify
+ // our directory components but just set the current volume
+ if ( !HasVolume() && curDir.HasVolume() )
+ {
+ SetVolume(curDir.GetVolume());
+
+ if ( !m_relative )
{
- dirsNew.Add(dirs[n]);
+ // yes, it was the case - we don't need curDir then
+ curDir.Clear();
+ }
}
- dirs = dirsNew;
+ // finally, prepend curDir to the dirs array
+ wxArrayString dirsNew = curDir.GetDirs();
+ WX_PREPEND_ARRAY(dirs, dirsNew);
+
+ // if we used e.g. tilde expansion previously and wxGetUserHome didn't
+ // return for some reason an absolute path, then curDir maybe not be absolute!
+ if ( curDir.IsAbsolute(format) )
+ {
+ // we have prepended an absolute path and thus we are now an absolute
+ // file name too
+ m_relative = false;
+ }
+ // else if (flags & wxPATH_NORM_ABSOLUTE):
+ // should we warn the user that we didn't manage to make the path absolute?
}
// now deal with ".", ".." and the rest
}
}
- if ( (flags & wxPATH_NORM_CASE) && !IsCaseSensitive(format) )
- {
- dir.MakeLower();
- }
-
m_dirs.Add(dir);
}
-
-#ifdef __WIN32__
+
+#if defined(__WIN32__) && !defined(__WXWINCE__) && wxUSE_OLE
if ( (flags & wxPATH_NORM_SHORTCUT) )
{
wxString filename;
if (GetShortcutTarget(GetFullPath(format), filename))
{
- // Repeat this since we may now have a new path
- if ( (flags & wxPATH_NORM_CASE) && !IsCaseSensitive(format) )
- {
- filename.MakeLower();
- }
m_relative = false;
Assign(filename);
}
}
#endif
- if ( (flags & wxPATH_NORM_CASE) && !IsCaseSensitive(format) )
- {
- // VZ: expand env vars here too?
-
- m_name.MakeLower();
- m_ext.MakeLower();
- }
-
- // we do have the path now
- //
- // NB: need to do this before (maybe) calling Assign() below
- m_relative = false;
-
#if defined(__WIN32__)
if ( (flags & wxPATH_NORM_LONG) && (format == wxPATH_DOS) )
{
}
#endif // Win32
+ // Change case (this should be kept at the end of the function, to ensure
+ // that the path doesn't change any more after we normalize its case)
+ if ( (flags & wxPATH_NORM_CASE) && !IsCaseSensitive(format) )
+ {
+ m_volume.MakeLower();
+ m_name.MakeLower();
+ m_ext.MakeLower();
+
+ // directory entries must be made lower case as well
+ count = m_dirs.GetCount();
+ for ( size_t i = 0; i < count; i++ )
+ {
+ m_dirs[i].MakeLower();
+ }
+ }
+
return true;
}
// files\myapp.exe) that includes spaces needs to be enclosed in
// quotation marks."
-#if defined(__WIN32__) && !defined(__WXWINCE__)
+#if defined(__WIN32__) && !defined(__WXWINCE__) && wxUSE_OLE
// The following lines are necessary under WinCE
// #include "wx/msw/private.h"
// #include <ole2.h>
#if defined(__WXWINCE__)
#include <shlguid.h>
#endif
-#endif
-#ifdef __WIN32__
-bool wxFileName::GetShortcutTarget(const wxString& shortcutPath, wxString& targetFilename, wxString* arguments)
+bool wxFileName::GetShortcutTarget(const wxString& shortcutPath,
+ wxString& targetFilename,
+ wxString* arguments)
{
-#ifdef __WXWINCE__
- // Doesn't compile on WinCE yet
- return FALSE;
-#else
wxString path, file, ext;
wxSplitPath(shortcutPath, & path, & file, & ext);
-
- HRESULT hres;
- IShellLink* psl;
- bool success = FALSE;
+
+ HRESULT hres;
+ IShellLink* psl;
+ bool success = false;
// Assume it's not a shortcut if it doesn't end with lnk
- if (ext.Lower() != wxT("lnk"))
- return FALSE;
-
- // create a ShellLink object
- hres = CoCreateInstance(CLSID_ShellLink, NULL, CLSCTX_INPROC_SERVER,
- IID_IShellLink, (LPVOID*) &psl);
-
- if (SUCCEEDED(hres))
- {
- IPersistFile* ppf;
- hres = psl->QueryInterface( IID_IPersistFile, (LPVOID *) &ppf);
- if (SUCCEEDED(hres))
- {
- WCHAR wsz[MAX_PATH];
-
- MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, shortcutPath.mb_str(), -1, wsz,
- MAX_PATH);
-
- hres = ppf->Load(wsz, 0);
- if (SUCCEEDED(hres))
- {
+ if (ext.CmpNoCase(wxT("lnk"))!=0)
+ return false;
+
+ // create a ShellLink object
+ hres = CoCreateInstance(CLSID_ShellLink, NULL, CLSCTX_INPROC_SERVER,
+ IID_IShellLink, (LPVOID*) &psl);
+
+ if (SUCCEEDED(hres))
+ {
+ IPersistFile* ppf;
+ hres = psl->QueryInterface( IID_IPersistFile, (LPVOID *) &ppf);
+ if (SUCCEEDED(hres))
+ {
+ WCHAR wsz[MAX_PATH];
+
+ MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, shortcutPath.mb_str(), -1, wsz,
+ MAX_PATH);
+
+ hres = ppf->Load(wsz, 0);
+ ppf->Release();
+
+ if (SUCCEEDED(hres))
+ {
wxChar buf[2048];
- psl->GetPath(buf, 2048, NULL, SLGP_UNCPRIORITY);
- targetFilename = wxString(buf);
+ // Wrong prototype in early versions
+#if defined(__MINGW32__) && !wxCHECK_W32API_VERSION(2, 2)
+ psl->GetPath((CHAR*) buf, 2048, NULL, SLGP_UNCPRIORITY);
+#else
+ psl->GetPath(buf, 2048, NULL, SLGP_UNCPRIORITY);
+#endif
+ targetFilename = wxString(buf);
success = (shortcutPath != targetFilename);
- psl->GetArguments(buf, 2048);
+ psl->GetArguments(buf, 2048);
wxString args(buf);
- if (!args.IsEmpty() && arguments)
+ if (!args.empty() && arguments)
{
*arguments = args;
- }
- }
- }
- }
- psl->Release();
- return success;
-#endif
+ }
+ }
+ }
+
+ psl->Release();
+ }
+ return success;
}
-#endif
+
+#endif // __WIN32__ && !__WXWINCE__
// ----------------------------------------------------------------------------
// get cwd only once - small time saving
wxString cwd = wxGetCwd();
- fn1.Normalize(wxPATH_NORM_ALL & ~wxPATH_NORM_CASE, cwd, format);
- fn2.Normalize(wxPATH_NORM_ALL & ~wxPATH_NORM_CASE, cwd, format);
+ fn1.Normalize(wxPATH_NORM_ALL | wxPATH_NORM_CASE, cwd, format);
+ fn2.Normalize(wxPATH_NORM_ALL | wxPATH_NORM_CASE, cwd, format);
if ( fn1.GetFullPath() == fn2.GetFullPath() )
return true;
}
/* static */
-wxString wxFileName::GetVolumeSeparator(wxPathFormat format)
+wxString wxFileName::GetVolumeSeparator(wxPathFormat WXUNUSED_IN_WINCE(format))
{
+#ifdef __WXWINCE__
+ return wxEmptyString;
+#else
wxString sepVol;
if ( (GetFormat(format) == wxPATH_DOS) ||
//else: leave empty
return sepVol;
+#endif
}
/* static */
return seps;
}
+/* static */
+wxString wxFileName::GetPathTerminators(wxPathFormat format)
+{
+ format = GetFormat(format);
+
+ // under VMS the end of the path is ']', not the path separator used to
+ // separate the components
+ return format == wxPATH_VMS ? wxString(_T(']')) : GetPathSeparators(format);
+}
+
/* static */
bool wxFileName::IsPathSeparator(wxChar ch, wxPathFormat format)
{
// wxString::Find() doesn't work as expected with NUL - it will always find
- // it, so it is almost surely a bug if this function is called with NUL arg
- wxASSERT_MSG( ch != _T('\0'), _T("shouldn't be called with NUL") );
-
- return GetPathSeparators(format).Find(ch) != wxNOT_FOUND;
+ // it, so test for it separately
+ return ch != _T('\0') && GetPathSeparators(format).Find(ch) != wxNOT_FOUND;
}
// ----------------------------------------------------------------------------
return true;
}
-void wxFileName::AppendDir( const wxString &dir )
+void wxFileName::AppendDir( const wxString& dir )
{
if ( IsValidDirComponent(dir) )
m_dirs.Add( dir );
}
-void wxFileName::PrependDir( const wxString &dir )
+void wxFileName::PrependDir( const wxString& dir )
{
InsertDir(0, dir);
}
-void wxFileName::InsertDir( int before, const wxString &dir )
+void wxFileName::InsertDir(size_t before, const wxString& dir)
{
if ( IsValidDirComponent(dir) )
- m_dirs.Insert( dir, before );
+ m_dirs.Insert(dir, before);
}
-void wxFileName::RemoveDir( int pos )
+void wxFileName::RemoveDir(size_t pos)
{
- m_dirs.RemoveAt( (size_t)pos );
+ m_dirs.RemoveAt(pos);
}
// ----------------------------------------------------------------------------
void wxFileName::SetFullName(const wxString& fullname)
{
- SplitPath(fullname, NULL /* no path */, &m_name, &m_ext);
+ SplitPath(fullname, NULL /* no volume */, NULL /* no path */,
+ &m_name, &m_ext, &m_hasExt);
}
wxString wxFileName::GetFullName() const
{
wxString fullname = m_name;
- if ( !m_ext.empty() )
+ if ( m_hasExt )
{
fullname << wxFILE_SEP_EXT << m_ext;
}
}
// convert back from ".." to nothing
- if ( m_dirs[i] != wxT("..") )
+ if ( !m_dirs[i].IsSameAs(wxT("..")) )
fullpath += m_dirs[i];
break;
// TODO: What to do with ".." under VMS
// convert back from ".." to nothing
- if ( m_dirs[i] != wxT("..") )
+ if ( !m_dirs[i].IsSameAs(wxT("..")) )
fullpath += m_dirs[i];
break;
}
// Return the short form of the path (returns identity on non-Windows platforms)
wxString wxFileName::GetShortPath() const
{
-#if defined(__WXMSW__) && defined(__WIN32__) && !defined(__WXMICROWIN__) && !defined(__WXWINCE__)
wxString path(GetFullPath());
- wxString pathOut;
- DWORD sz = ::GetShortPathName(path, NULL, 0);
- bool ok = sz != 0;
- if ( ok )
+
+#if defined(__WXMSW__) && defined(__WIN32__) && !defined(__WXMICROWIN__) && !defined(__WXWINCE__)
+ DWORD sz = ::GetShortPathName(path.fn_str(), NULL, 0);
+ if ( sz != 0 )
{
- ok = ::GetShortPathName
+ wxString pathOut;
+ if ( ::GetShortPathName
(
- path,
+ path.fn_str(),
wxStringBuffer(pathOut, sz),
sz
- ) != 0;
+ ) != 0 )
+ {
+ return pathOut;
+ }
}
- if (ok)
- return pathOut;
+#endif // Windows
return path;
-#else
- return GetFullPath();
-#endif
}
// Return the long form of the path (returns identity on non-Windows platforms)
wxString pathOut,
path = GetFullPath();
-#if defined(__WIN32__) && !defined(__WXMICROWIN__)
- bool success = false;
+#if defined(__WIN32__) && !defined(__WXWINCE__) && !defined(__WXMICROWIN__)
-#if wxUSE_DYNAMIC_LOADER
+#if wxUSE_DYNLIB_CLASS
typedef DWORD (WINAPI *GET_LONG_PATH_NAME)(const wxChar *, wxChar *, DWORD);
- static bool s_triedToLoad = false;
-
- if ( !s_triedToLoad )
+ // this is MT-safe as in the worst case we're going to resolve the function
+ // twice -- but as the result is the same in both threads, it's ok
+ static GET_LONG_PATH_NAME s_pfnGetLongPathName = NULL;
+ if ( !s_pfnGetLongPathName )
{
- // suppress the errors about missing GetLongPathName[AW]
- wxLogNull noLog;
+ static bool s_triedToLoad = false;
- s_triedToLoad = true;
- wxDynamicLibrary dllKernel(_T("kernel32"));
- if ( dllKernel.IsLoaded() )
+ if ( !s_triedToLoad )
{
- // may succeed or fail depending on the Windows version
- static GET_LONG_PATH_NAME s_pfnGetLongPathName = NULL;
-#ifdef _UNICODE
- s_pfnGetLongPathName = (GET_LONG_PATH_NAME) dllKernel.GetSymbol(_T("GetLongPathNameW"));
-#else
- s_pfnGetLongPathName = (GET_LONG_PATH_NAME) dllKernel.GetSymbol(_T("GetLongPathNameA"));
-#endif
+ s_triedToLoad = true;
- if ( s_pfnGetLongPathName )
- {
- DWORD dwSize = (*s_pfnGetLongPathName)(path, NULL, 0);
- bool ok = dwSize > 0;
+ wxDynamicLibrary dllKernel(_T("kernel32"));
- if ( ok )
- {
- DWORD sz = (*s_pfnGetLongPathName)(path, NULL, 0);
- ok = sz != 0;
- if ( ok )
- {
- ok = (*s_pfnGetLongPathName)
- (
- path,
- wxStringBuffer(pathOut, sz),
- sz
- ) != 0;
- success = true;
- }
- }
+ const wxChar* GetLongPathName = _T("GetLongPathName")
+#if wxUSE_UNICODE
+ _T("W");
+#else // ANSI
+ _T("A");
+#endif // Unicode/ANSI
+
+ if ( dllKernel.HasSymbol(GetLongPathName) )
+ {
+ s_pfnGetLongPathName = (GET_LONG_PATH_NAME)
+ dllKernel.GetSymbol(GetLongPathName);
}
+
+ // note that kernel32.dll can be unloaded, it stays in memory
+ // anyhow as all Win32 programs link to it and so it's safe to call
+ // GetLongPathName() even after unloading it
}
}
- if (success)
- return pathOut;
-#endif // wxUSE_DYNAMIC_LOADER
-
- if (!success)
+ if ( s_pfnGetLongPathName )
{
- // The OS didn't support GetLongPathName, or some other error.
- // We need to call FindFirstFile on each component in turn.
-
- WIN32_FIND_DATA findFileData;
- HANDLE hFind;
+ DWORD dwSize = (*s_pfnGetLongPathName)(path.fn_str(), NULL, 0);
+ if ( dwSize > 0 )
+ {
+ if ( (*s_pfnGetLongPathName)
+ (
+ path.fn_str(),
+ wxStringBuffer(pathOut, dwSize),
+ dwSize
+ ) != 0 )
+ {
+ return pathOut;
+ }
+ }
+ }
+#endif // wxUSE_DYNLIB_CLASS
- if ( HasVolume() )
- pathOut = GetVolume() +
- GetVolumeSeparator(wxPATH_DOS) +
- GetPathSeparator(wxPATH_DOS);
- else
- pathOut = wxEmptyString;
+ // The OS didn't support GetLongPathName, or some other error.
+ // We need to call FindFirstFile on each component in turn.
- wxArrayString dirs = GetDirs();
- dirs.Add(GetFullName());
+ WIN32_FIND_DATA findFileData;
+ HANDLE hFind;
- wxString tmpPath;
+ if ( HasVolume() )
+ pathOut = GetVolume() +
+ GetVolumeSeparator(wxPATH_DOS) +
+ GetPathSeparator(wxPATH_DOS);
+ else
+ pathOut = wxEmptyString;
- size_t count = dirs.GetCount();
- for ( size_t i = 0; i < count; i++ )
- {
- // We're using pathOut to collect the long-name path, but using a
- // temporary for appending the last path component which may be
- // short-name
- tmpPath = pathOut + dirs[i];
+ wxArrayString dirs = GetDirs();
+ dirs.Add(GetFullName());
- if ( tmpPath.empty() )
- continue;
+ wxString tmpPath;
- // can't see this being necessary? MF
- if ( tmpPath.Last() == GetVolumeSeparator(wxPATH_DOS) )
- {
- // Can't pass a drive and root dir to FindFirstFile,
- // so continue to next dir
- tmpPath += wxFILE_SEP_PATH;
- pathOut = tmpPath;
- continue;
- }
+ size_t count = dirs.GetCount();
+ for ( size_t i = 0; i < count; i++ )
+ {
+ const wxString& dir = dirs[i];
- hFind = ::FindFirstFile(tmpPath, &findFileData);
- if (hFind == INVALID_HANDLE_VALUE)
- {
- // Error: most likely reason is that path doesn't exist, so
- // append any unprocessed parts and return
- for ( i += 1; i < count; i++ )
- tmpPath += wxFILE_SEP_PATH + dirs[i];
+ // We're using pathOut to collect the long-name path, but using a
+ // temporary for appending the last path component which may be
+ // short-name
+ tmpPath = pathOut + dir;
- return tmpPath;
- }
+ // We must not process "." or ".." here as they would be (unexpectedly)
+ // replaced by the corresponding directory names so just leave them
+ // alone
+ //
+ // And we can't pass a drive and root dir to FindFirstFile (VZ: why?)
+ if ( tmpPath.empty() || dir == '.' || dir == ".." ||
+ tmpPath.Last() == GetVolumeSeparator(wxPATH_DOS) )
+ {
+ tmpPath += wxFILE_SEP_PATH;
+ pathOut = tmpPath;
+ continue;
+ }
- pathOut += findFileData.cFileName;
- if ( (i < (count-1)) )
- pathOut += wxFILE_SEP_PATH;
+ hFind = ::FindFirstFile(tmpPath.fn_str(), &findFileData);
+ if (hFind == INVALID_HANDLE_VALUE)
+ {
+ // Error: most likely reason is that path doesn't exist, so
+ // append any unprocessed parts and return
+ for ( i += 1; i < count; i++ )
+ tmpPath += wxFILE_SEP_PATH + dirs[i];
- ::FindClose(hFind);
+ return tmpPath;
}
+
+ pathOut += findFileData.cFileName;
+ if ( (i < (count-1)) )
+ pathOut += wxFILE_SEP_PATH;
+
+ ::FindClose(hFind);
}
#else // !Win32
pathOut = path;
{
#if defined(__WXMSW__) || defined(__OS2__) || defined(__DOS__)
format = wxPATH_DOS;
-#elif defined(__WXMAC__) && !defined(__DARWIN__)
- format = wxPATH_MAC;
#elif defined(__VMS)
format = wxPATH_VMS;
#else
return format;
}
+#ifdef wxHAS_FILESYSTEM_VOLUMES
+
+/* static */
+wxString wxFileName::GetVolumeString(char drive, int flags)
+{
+ wxASSERT_MSG( !(flags & ~wxPATH_GET_SEPARATOR), "invalid flag specified" );
+
+ wxString vol(drive);
+ vol += wxFILE_SEP_DSK;
+ if ( flags & wxPATH_GET_SEPARATOR )
+ vol += wxFILE_SEP_PATH;
+
+ return vol;
+}
+
+#endif // wxHAS_FILESYSTEM_VOLUMES
+
// ----------------------------------------------------------------------------
// path splitting function
// ----------------------------------------------------------------------------
/* static */
-void wxFileName::SplitPath(const wxString& fullpathWithVolume,
- wxString *pstrVolume,
- wxString *pstrPath,
- wxString *pstrName,
- wxString *pstrExt,
- wxPathFormat format)
+void
+wxFileName::SplitVolume(const wxString& fullpathWithVolume,
+ wxString *pstrVolume,
+ wxString *pstrPath,
+ wxPathFormat format)
{
format = GetFormat(format);
wxString fullpath = fullpathWithVolume;
- // under VMS the end of the path is ']', not the path separator used to
- // separate the components
- wxString sepPath = format == wxPATH_VMS ? wxString(_T(']'))
- : GetPathSeparators(format);
-
// special Windows UNC paths hack: transform \\share\path into share:path
- if ( format == wxPATH_DOS )
+ if ( IsUNCPath(fullpath, format) )
{
- if ( fullpath.length() >= 4 &&
- fullpath[0u] == wxFILE_SEP_PATH_DOS &&
- fullpath[1u] == wxFILE_SEP_PATH_DOS )
- {
- fullpath.erase(0, 2);
+ fullpath.erase(0, 2);
- size_t posFirstSlash = fullpath.find_first_of(sepPath);
- if ( posFirstSlash != wxString::npos )
- {
- fullpath[posFirstSlash] = wxFILE_SEP_DSK;
+ size_t posFirstSlash =
+ fullpath.find_first_of(GetPathTerminators(format));
+ if ( posFirstSlash != wxString::npos )
+ {
+ fullpath[posFirstSlash] = wxFILE_SEP_DSK;
- // UNC paths are always absolute, right? (FIXME)
- fullpath.insert(posFirstSlash + 1, 1, wxFILE_SEP_PATH_DOS);
- }
+ // UNC paths are always absolute, right? (FIXME)
+ fullpath.insert(posFirstSlash + 1, 1, wxFILE_SEP_PATH_DOS);
}
}
}
}
+ if ( pstrPath )
+ *pstrPath = fullpath;
+}
+
+/* static */
+void wxFileName::SplitPath(const wxString& fullpathWithVolume,
+ wxString *pstrVolume,
+ wxString *pstrPath,
+ wxString *pstrName,
+ wxString *pstrExt,
+ bool *hasExt,
+ wxPathFormat format)
+{
+ format = GetFormat(format);
+
+ wxString fullpath;
+ SplitVolume(fullpathWithVolume, pstrVolume, &fullpath, format);
+
// find the positions of the last dot and last path separator in the path
size_t posLastDot = fullpath.find_last_of(wxFILE_SEP_EXT);
- size_t posLastSlash = fullpath.find_last_of(sepPath);
+ size_t posLastSlash = fullpath.find_last_of(GetPathTerminators(format));
+ // check whether this dot occurs at the very beginning of a path component
if ( (posLastDot != wxString::npos) &&
- ((format == wxPATH_UNIX) || (format == wxPATH_VMS)) )
+ (posLastDot == 0 ||
+ IsPathSeparator(fullpath[posLastDot - 1]) ||
+ (format == wxPATH_VMS && fullpath[posLastDot - 1] == _T(']'))) )
{
- if ( (posLastDot == 0) ||
- (fullpath[posLastDot - 1] == sepPath[0u] ) )
- {
- // under Unix and VMS, dot may be (and commonly is) the first
- // character of the filename, don't treat the entire filename as
- // extension in this case
- posLastDot = wxString::npos;
- }
+ // dot may be (and commonly -- at least under Unix -- is) the first
+ // character of the filename, don't treat the entire filename as
+ // extension in this case
+ posLastDot = wxString::npos;
}
// if we do have a dot and a slash, check that the dot is in the name part
*pstrName = fullpath.Mid(nStart, count);
}
- if ( pstrExt )
+ // finally deal with the extension here: we have an added complication that
+ // extension may be empty (but present) as in "foo." where trailing dot
+ // indicates the empty extension at the end -- and hence we must remember
+ // that we have it independently of pstrExt
+ if ( posLastDot == wxString::npos )
{
- if ( posLastDot == wxString::npos )
- {
- // no extension
- pstrExt->Empty();
- }
- else
- {
- // take everything after the dot
+ // no extension
+ if ( pstrExt )
+ pstrExt->clear();
+ if ( hasExt )
+ *hasExt = false;
+ }
+ else
+ {
+ // take everything after the dot
+ if ( pstrExt )
*pstrExt = fullpath.Mid(posLastDot + 1);
- }
+ if ( hasExt )
+ *hasExt = true;
}
}
}
}
#elif defined(__UNIX_LIKE__) || (defined(__DOS__) && defined(__WATCOMC__))
+ wxUnusedVar(dtCreate);
+
if ( !dtAccess && !dtMod )
{
// can't modify the creation time anyhow, don't try
return true;
}
#else // other platform
+ wxUnusedVar(dtAccess);
+ wxUnusedVar(dtMod);
+ wxUnusedVar(dtCreate);
#endif // platforms
wxLogSysError(_("Failed to modify file times for '%s'"),
return true;
}
-#elif defined(__UNIX_LIKE__) || defined(__WXMAC__) || (defined(__DOS__) && defined(__WATCOMC__))
+#elif defined(__UNIX_LIKE__) || defined(__WXMAC__) || defined(__OS2__) || (defined(__DOS__) && defined(__WATCOMC__))
+ // no need to test for IsDir() here
wxStructStat stBuf;
if ( wxStat( GetFullPath().c_str(), &stBuf) == 0 )
{
return true;
}
#else // other platform
+ wxUnusedVar(dtAccess);
+ wxUnusedVar(dtMod);
+ wxUnusedVar(dtCreate);
#endif // platforms
wxLogSysError(_("Failed to retrieve file times for '%s'"),
#endif // wxUSE_DATETIME
-#ifdef __WXMAC__
+
+// ----------------------------------------------------------------------------
+// file size functions
+// ----------------------------------------------------------------------------
+
+#if wxUSE_LONGLONG
+
+/* static */
+wxULongLong wxFileName::GetSize(const wxString &filename)
+{
+ if (!wxFileExists(filename))
+ return wxInvalidSize;
+
+#if defined(__WXPALMOS__)
+ // TODO
+ return wxInvalidSize;
+#elif defined(__WIN32__)
+ wxFileHandle f(filename, wxFileHandle::Read);
+ if (!f.IsOk())
+ return wxInvalidSize;
+
+ DWORD lpFileSizeHigh;
+ DWORD ret = GetFileSize(f, &lpFileSizeHigh);
+ if ( ret == INVALID_FILE_SIZE && ::GetLastError() != NO_ERROR )
+ return wxInvalidSize;
+
+ return wxULongLong(lpFileSizeHigh, ret);
+#else // ! __WIN32__
+ wxStructStat st;
+#ifndef wxNEED_WX_UNISTD_H
+ if (wxStat( filename.fn_str() , &st) != 0)
+#else
+ if (wxStat( filename, &st) != 0)
+#endif
+ return wxInvalidSize;
+ return wxULongLong(st.st_size);
+#endif
+}
+
+/* static */
+wxString wxFileName::GetHumanReadableSize(const wxULongLong &bs,
+ const wxString &nullsize,
+ int precision)
+{
+ static const double KILOBYTESIZE = 1024.0;
+ static const double MEGABYTESIZE = 1024.0*KILOBYTESIZE;
+ static const double GIGABYTESIZE = 1024.0*MEGABYTESIZE;
+ static const double TERABYTESIZE = 1024.0*GIGABYTESIZE;
+
+ if (bs == 0 || bs == wxInvalidSize)
+ return nullsize;
+
+ double bytesize = bs.ToDouble();
+ if (bytesize < KILOBYTESIZE)
+ return wxString::Format(_("%s B"), bs.ToString().c_str());
+ if (bytesize < MEGABYTESIZE)
+ return wxString::Format(_("%.*f kB"), precision, bytesize/KILOBYTESIZE);
+ if (bytesize < GIGABYTESIZE)
+ return wxString::Format(_("%.*f MB"), precision, bytesize/MEGABYTESIZE);
+ if (bytesize < TERABYTESIZE)
+ return wxString::Format(_("%.*f GB"), precision, bytesize/GIGABYTESIZE);
+
+ return wxString::Format(_("%.*f TB"), precision, bytesize/TERABYTESIZE);
+}
+
+wxULongLong wxFileName::GetSize() const
+{
+ return GetSize(GetFullPath());
+}
+
+wxString wxFileName::GetHumanReadableSize(const wxString &failmsg, int precision) const
+{
+ return GetHumanReadableSize(GetSize(), failmsg, precision);
+}
+
+#endif // wxUSE_LONGLONG
+
+// ----------------------------------------------------------------------------
+// Mac-specific functions
+// ----------------------------------------------------------------------------
+
+#if defined( __WXOSX_MAC__ ) && wxOSX_USE_CARBON
const short kMacExtensionMaxLength = 16 ;
class MacDefaultExtensionRecord
MacDefaultExtensionRecord()
{
m_ext[0] = 0 ;
- m_type = m_creator = NULL ;
+ m_type = m_creator = 0 ;
}
MacDefaultExtensionRecord( const MacDefaultExtensionRecord& from )
{
OSType m_creator ;
} ;
-#include "wx/dynarray.h"
WX_DECLARE_OBJARRAY(MacDefaultExtensionRecord, MacDefaultExtensionArray) ;
bool gMacDefaultExtensionsInited = false ;
MacDefaultExtensionArray gMacDefaultExtensions ;
-static void MacEnsureDefaultExtensionsLoaded()
+// load the default extensions
+MacDefaultExtensionRecord gDefaults[] =
{
- if ( !gMacDefaultExtensionsInited )
- {
-
- // load the default extensions
- MacDefaultExtensionRecord defaults[1] =
- {
- MacDefaultExtensionRecord( wxT("txt") , 'TEXT' , 'ttxt' ) ,
+ MacDefaultExtensionRecord( wxT("txt") , 'TEXT' , 'ttxt' ) ,
+ MacDefaultExtensionRecord( wxT("tif") , 'TIFF' , '****' ) ,
+ MacDefaultExtensionRecord( wxT("jpg") , 'JPEG' , '****' ) ,
+} ;
- } ;
- // we could load the pc exchange prefs here too
-
- for ( size_t i = 0 ; i < WXSIZEOF( defaults ) ; ++i )
+static void MacEnsureDefaultExtensionsLoaded()
+{
+ if ( !gMacDefaultExtensionsInited )
{
- gMacDefaultExtensions.Add( defaults[i] ) ;
+ // we could load the pc exchange prefs here too
+ for ( size_t i = 0 ; i < WXSIZEOF( gDefaults ) ; ++i )
+ {
+ gMacDefaultExtensions.Add( gDefaults[i] ) ;
+ }
+ gMacDefaultExtensionsInited = true ;
}
- gMacDefaultExtensionsInited = true ;
- }
}
+
bool wxFileName::MacSetTypeAndCreator( wxUint32 type , wxUint32 creator )
{
- FInfo fndrInfo ;
- FSSpec spec ;
- wxMacFilename2FSSpec(GetFullPath(),&spec) ;
- OSErr err = FSpGetFInfo( &spec , &fndrInfo ) ;
- wxCHECK( err == noErr , false ) ;
+ FSRef fsRef ;
+ FSCatalogInfo catInfo;
+ FileInfo *finfo ;
- fndrInfo.fdType = type ;
- fndrInfo.fdCreator = creator ;
- FSpSetFInfo( &spec , &fndrInfo ) ;
- return true ;
+ if ( wxMacPathToFSRef( GetFullPath() , &fsRef ) == noErr )
+ {
+ if ( FSGetCatalogInfo (&fsRef, kFSCatInfoFinderInfo, &catInfo, NULL, NULL, NULL) == noErr )
+ {
+ finfo = (FileInfo*)&catInfo.finderInfo;
+ finfo->fileType = type ;
+ finfo->fileCreator = creator ;
+ FSSetCatalogInfo( &fsRef, kFSCatInfoFinderInfo, &catInfo ) ;
+ return true ;
+ }
+ }
+ return false ;
}
bool wxFileName::MacGetTypeAndCreator( wxUint32 *type , wxUint32 *creator )
{
- FInfo fndrInfo ;
- FSSpec spec ;
- wxMacFilename2FSSpec(GetFullPath(),&spec) ;
- OSErr err = FSpGetFInfo( &spec , &fndrInfo ) ;
- wxCHECK( err == noErr , false ) ;
+ FSRef fsRef ;
+ FSCatalogInfo catInfo;
+ FileInfo *finfo ;
- *type = fndrInfo.fdType ;
- *creator = fndrInfo.fdCreator ;
- return true ;
+ if ( wxMacPathToFSRef( GetFullPath() , &fsRef ) == noErr )
+ {
+ if ( FSGetCatalogInfo (&fsRef, kFSCatInfoFinderInfo, &catInfo, NULL, NULL, NULL) == noErr )
+ {
+ finfo = (FileInfo*)&catInfo.finderInfo;
+ *type = finfo->fileType ;
+ *creator = finfo->fileCreator ;
+ return true ;
+ }
+ }
+ return false ;
}
bool wxFileName::MacSetDefaultTypeAndCreator()
projects / wxWidgets.git / blobdiff