+ fi
+
+ if test x"$no_gtk" = x ; then
+ GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
+ GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
+ gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_gtktest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$GTK_LIBS $LIBS"
+ rm -f conf.gtktest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+ cat > conftest.$ac_ext <<EOF
+#line 11969 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.gtktest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_gtk_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ if ((gtk_major_version != $gtk_config_major_version) ||
+ (gtk_minor_version != $gtk_config_minor_version) ||
+ (gtk_micro_version != $gtk_config_micro_version))
+ {
+ printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf ("*** was found! If pkg-config was correct, then it is best\n");
+ printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
+ printf("*** to point to the correct configuration files\n");
+ }
+ else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_micro_version != GTK_MICRO_VERSION))
+ {
+ printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ }
+ else
+ {
+ if ((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
+ printf("*** correct copy of pkg-config. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+
+EOF
+if { (eval echo configure:12044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ no_gtk=yes
+fi
+rm -fr conftest*
+fi
+
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_gtk" = x ; then
+ echo "$ac_t""yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" 1>&6
+ wx_cv_lib_gtk=2.0
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** A new enough version of pkg-config was not found."
+ echo "*** See http://pkgconfig.sourceforge.net"
+ else
+ if test -f conf.gtktest ; then
+ :
+ else
+ echo "*** Could not run GTK+ test program, checking why..."
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 12078 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+
+int main() {
+ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
+; return 0; }
+EOF
+if { (eval echo configure:12088: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
+ echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."
+fi
+rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+ :
+ fi
+
+
+ rm -f conf.gtktest
+
+ fi
+
+ if test -z "$wx_cv_lib_gtk"; then
+ # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
+if test "${with_gtk_prefix+set}" = set; then
+ withval="$with_gtk_prefix"
+ gtk_config_prefix="$withval"
+else
+ gtk_config_prefix=""
+fi
+
+# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
+if test "${with_gtk_exec_prefix+set}" = set; then
+ withval="$with_gtk_exec_prefix"
+ gtk_config_exec_prefix="$withval"
+else
+ gtk_config_exec_prefix=""
+fi
+
+# Check whether --enable-gtktest or --disable-gtktest was given.
+if test "${enable_gtktest+set}" = set; then
+ enableval="$enable_gtktest"
+ :
+else
+ enable_gtktest=yes
+fi
+
+
+ for module in . $GTK_MODULES
+ do
+ case "$module" in
+ gthread)
+ gtk_config_args="$gtk_config_args gthread"
+ ;;
+ esac
+ done
+
+ if test x$gtk_config_exec_prefix != x ; then
+ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+ fi
+ fi
+ if test x$gtk_config_prefix != x ; then
+ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+ fi
+ fi
+
+ # Extract the first word of "gtk-config", so it can be a program name with args.
+set dummy gtk-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:12172: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GTK_CONFIG" in
+ /*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
+ ;;
+esac
+fi
+GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
+if test -n "$GTK_CONFIG"; then
+ echo "$ac_t""$GTK_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ min_gtk_version=1.2.7
+ echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
+echo "configure:12207: checking for GTK - version >= $min_gtk_version" >&5
+ no_gtk=""
+ if test "$GTK_CONFIG" = "no" ; then
+ no_gtk=yes
+ else
+ GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
+ GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
+ gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_gtktest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$GTK_LIBS $LIBS"
+ rm -f conf.gtktest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+ cat > conftest.$ac_ext <<EOF
+#line 12230 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.gtktest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_gtk_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ if ((gtk_major_version != $gtk_config_major_version) ||
+ (gtk_minor_version != $gtk_config_minor_version) ||
+ (gtk_micro_version != $gtk_config_micro_version))
+ {
+ printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf ("*** was found! If gtk-config was correct, then it is best\n");
+ printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
+ printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
+ printf("*** before re-running configure\n");
+ }
+#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
+ else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_micro_version != GTK_MICRO_VERSION))
+ {
+ printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ }
+#endif /* defined (GTK_MAJOR_VERSION) ... */
+ else
+ {
+ if ((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
+ printf("*** correct copy of gtk-config. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+
+EOF
+if { (eval echo configure:12308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ no_gtk=yes
+fi
+rm -fr conftest*
+fi
+
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_gtk" = x ; then
+ echo "$ac_t""yes" 1>&6
+ wx_cv_lib_gtk=1.2.7
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$GTK_CONFIG" = "no" ; then
+ echo "*** The gtk-config script installed by GTK could not be found"
+ echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the GTK_CONFIG environment variable to the"
+ echo "*** full path to gtk-config."
+ else
+ if test -f conf.gtktest ; then
+ :
+ else
+ echo "*** Could not run GTK test program, checking why..."
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 12342 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+
+int main() {
+ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
+; return 0; }
+EOF
+if { (eval echo configure:12352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GTK or finding the wrong"
+ echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+ echo "***"
+ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+ echo "*** came with the system with the command"
+ echo "***"
+ echo "*** rpm --erase --nodeps gtk gtk-devel"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GTK was incorrectly installed"
+ echo "*** or that you have moved GTK since it was installed. In the latter case, you"
+ echo "*** may want to edit the gtk-config script: $GTK_CONFIG"
+fi
+rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+ :
+ fi
+
+
+ rm -f conf.gtktest
+
+ fi
+
+ if test -z "$wx_cv_lib_gtk"; then
+ # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
+if test "${with_gtk_prefix+set}" = set; then
+ withval="$with_gtk_prefix"
+ gtk_config_prefix="$withval"
+else
+ gtk_config_prefix=""
+fi
+
+# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
+if test "${with_gtk_exec_prefix+set}" = set; then
+ withval="$with_gtk_exec_prefix"
+ gtk_config_exec_prefix="$withval"
+else
+ gtk_config_exec_prefix=""
+fi
+
+# Check whether --enable-gtktest or --disable-gtktest was given.
+if test "${enable_gtktest+set}" = set; then
+ enableval="$enable_gtktest"
+ :
+else
+ enable_gtktest=yes
+fi
+
+
+ for module in . $GTK_MODULES
+ do
+ case "$module" in
+ gthread)
+ gtk_config_args="$gtk_config_args gthread"
+ ;;
+ esac
+ done
+
+ if test x$gtk_config_exec_prefix != x ; then
+ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+ fi
+ fi
+ if test x$gtk_config_prefix != x ; then
+ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+ fi
+ fi
+
+ # Extract the first word of "gtk-config", so it can be a program name with args.
+set dummy gtk-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:12443: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GTK_CONFIG" in
+ /*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
+ ;;
+esac
+fi
+GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
+if test -n "$GTK_CONFIG"; then
+ echo "$ac_t""$GTK_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ min_gtk_version=1.2.3
+ echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
+echo "configure:12478: checking for GTK - version >= $min_gtk_version" >&5
+ no_gtk=""
+ if test "$GTK_CONFIG" = "no" ; then
+ no_gtk=yes
+ else
+ GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
+ GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
+ gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_gtktest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$GTK_LIBS $LIBS"
+ rm -f conf.gtktest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+ cat > conftest.$ac_ext <<EOF
+#line 12501 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.gtktest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_gtk_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ if ((gtk_major_version != $gtk_config_major_version) ||
+ (gtk_minor_version != $gtk_config_minor_version) ||
+ (gtk_micro_version != $gtk_config_micro_version))
+ {
+ printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf ("*** was found! If gtk-config was correct, then it is best\n");
+ printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
+ printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
+ printf("*** before re-running configure\n");
+ }
+#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
+ else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_micro_version != GTK_MICRO_VERSION))
+ {
+ printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ }
+#endif /* defined (GTK_MAJOR_VERSION) ... */
+ else
+ {
+ if ((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
+ printf("*** correct copy of gtk-config. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+
+EOF
+if { (eval echo configure:12579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ no_gtk=yes
+fi
+rm -fr conftest*
+fi
+
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_gtk" = x ; then
+ echo "$ac_t""yes" 1>&6
+ wx_cv_lib_gtk=1.2.3
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$GTK_CONFIG" = "no" ; then
+ echo "*** The gtk-config script installed by GTK could not be found"
+ echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the GTK_CONFIG environment variable to the"
+ echo "*** full path to gtk-config."
+ else
+ if test -f conf.gtktest ; then
+ :
+ else
+ echo "*** Could not run GTK test program, checking why..."
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 12613 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+
+int main() {
+ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
+; return 0; }
+EOF
+if { (eval echo configure:12623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GTK or finding the wrong"
+ echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+ echo "***"
+ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+ echo "*** came with the system with the command"
+ echo "***"
+ echo "*** rpm --erase --nodeps gtk gtk-devel"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GTK was incorrectly installed"
+ echo "*** or that you have moved GTK since it was installed. In the latter case, you"
+ echo "*** may want to edit the gtk-config script: $GTK_CONFIG"
+fi
+rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+ :
+ fi
+
+
+ rm -f conf.gtktest
+
+ fi
+
+ if test -z "$wx_cv_lib_gtk"; then
+ wx_cv_lib_gtk=none
+ else
+ wx_cv_cflags_gtk=$GTK_CFLAGS
+ wx_cv_libs_gtk=$GTK_LIBS
+ fi
+
+
+fi
+
+
+ if test "$gtk_version_cached" = 1; then
+ echo "$ac_t""$wx_cv_lib_gtk" 1>&6
+ fi
+
+ case "$wx_cv_lib_gtk" in
+ 2.0) WXGTK20=1
+ ;;
+ 1.2.7) WXGTK127=1
+ WXGTK12=1
+ ;;
+ 1.2.3) WXGTK12=1
+ ;;
+ *) { echo "configure: error:
+Please check that gtk-config is in path, the directory
+where GTK+ libraries are installed (returned by
+'gtk-config --libs' command) is in LD_LIBRARY_PATH or
+equivalent variable and GTK+ is version 1.2.3 or above.
+ " 1>&2; exit 1; }
+ ;;
+ esac
+
+ if test "$WXGTK20" = 1; then
+ if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes" ; then
+
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:12704: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
+ ;;
+esac
+fi
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ echo $ac_n "checking for pangoft2""... $ac_c" 1>&6
+echo "configure:12748: checking for pangoft2" >&5
+
+ if $PKG_CONFIG --exists "pangoft2" ; then
+ echo "$ac_t""yes" 1>&6
+ succeeded=yes
+
+ echo $ac_n "checking PANGOFT2_CFLAGS""... $ac_c" 1>&6
+echo "configure:12755: checking PANGOFT2_CFLAGS" >&5
+ PANGOFT2_CFLAGS=`$PKG_CONFIG --cflags "pangoft2"`
+ echo "$ac_t""$PANGOFT2_CFLAGS" 1>&6
+
+ echo $ac_n "checking PANGOFT2_LIBS""... $ac_c" 1>&6
+echo "configure:12760: checking PANGOFT2_LIBS" >&5
+ PANGOFT2_LIBS=`$PKG_CONFIG --libs "pangoft2"`
+ echo "$ac_t""$PANGOFT2_LIBS" 1>&6
+ else
+ PANGOFT2_CFLAGS=""
+ PANGOFT2_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ PANGOFT2_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pangoft2"`
+
+ fi
+
+
+
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+
+ CXXFLAGS="$CXXFLAGS $PANGOFT2_CFLAGS"
+ LIBS="$LIBS $PANGOFT2_LIBS"
+
+ else
+
+ echo "configure: warning: pangoft2 library not found, library will be compiled without printing support" 1>&2
+ wxUSE_PRINTING_ARCHITECTURE="no"
+
+
+ fi
+
+ fi
+ fi
+
+ TOOLKIT_INCLUDE="$wx_cv_cflags_gtk"
+ GUI_TK_LIBRARY="$wx_cv_libs_gtk"
+
+ AFMINSTALL=afminstall
+ TOOLKIT=GTK
+ GUIDIST=GTK_DIST
+
+ echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
+echo "configure:12804: checking for gdk_im_open in -lgdk" >&5
+ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lgdk $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 12812 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gdk_im_open();
+
+int main() {
+gdk_im_open()
+; return 0; }
+EOF
+if { (eval echo configure:12823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_XIM 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$wxUSE_MGL" = 1; then
+ echo $ac_n "checking for SciTech MGL library""... $ac_c" 1>&6
+echo "configure:12850: checking for SciTech MGL library" >&5
+ if test "x$MGL_ROOT" = x ; then
+ echo "$ac_t""not found" 1>&6
+ { echo "configure: error: Cannot find MGL library. Make sure MGL_ROOT is set." 1>&2; exit 1; }
+ else
+ echo "$ac_t""$MGL_ROOT" 1>&6
+ fi
+
+ case "${host}" in
+ *-*-linux* )
+ mgl_os=linux/gcc/glibc
+ ;;
+ *-pc-msdosdjgpp )
+ mgl_os=dos32/dj2
+ ;;
+ *)
+ { echo "configure: error: This system type ${host} is not yet supported by wxMGL." 1>&2; exit 1; }
+ esac
+
+ mgl_lib_type=""
+
+ if test "$wxUSE_DEBUG_FLAG" = yes ; then
+ if test -f $MGL_ROOT/lib/debug/$mgl_os/libmgl.a -o \
+ -f $MGL_ROOT/lib/debug/$mgl_os/libmgl.so; then
+ mgl_lib_type=debug
+ fi
+ fi
+ if test "x$mgl_lib_type" = x ; then
+ if test -f $MGL_ROOT/lib/release/$mgl_os/libmgl.a -o \
+ -f $MGL_ROOT/lib/release/$mgl_os/libmgl.so; then
+ mgl_lib_type=release
+ else
+ { echo "configure: error: Cannot find MGL libraries, make sure they are compiled." 1>&2; exit 1; }
+ fi
+ fi
+
+ wxUSE_UNIVERSAL="yes"
+
+ TOOLKIT_INCLUDE="-I$MGL_ROOT/include"
+ GUI_TK_LIBRARY="-L$MGL_ROOT/lib/$mgl_lib_type/$mgl_os -lmgl -lmglcpp -lpm"
+
+ AFMINSTALL=afminstall
+ TOOLKIT=MGL
+ GUIDIST=MGL_DIST
+ fi
+
+ if test "$wxUSE_MICROWIN" = 1; then
+ echo $ac_n "checking for MicroWindows""... $ac_c" 1>&6
+echo "configure:12898: checking for MicroWindows" >&5
+ if test "x$MICROWINDOWS" = x ; then
+ echo "$ac_t""not found" 1>&6
+ { echo "configure: error: Cannot find MicroWindows library. Make sure MICROWINDOWS is set." 1>&2; exit 1; }
+ else
+ echo "$ac_t""$MICROWINDOWS" 1>&6
+ fi
+
+ if test -f $MICROWINDOWS/lib/libmwin.a; then
+ echo "$ac_t""MicroWindows' libraries found." 1>&6
+ else
+ { echo "configure: error: Cannot find MicroWindows libraries, make sure they are compiled." 1>&2; exit 1; }
+ fi
+
+ TOOLKIT_INCLUDE="-I$MICROWINDOWS/include"
+ GUI_TK_LIBRARY="-L$MICROWINDOWS/lib -lmwin -lmwengine -mwfonts -mwdrivers -mwinlib"
+
+ wxUSE_UNIVERSAL="yes"
+
+ AFMINSTALL=afminstall
+ TOOLKIT=MICROWIN
+ GUIDIST=MICROWIN_DIST
+
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXMSW__ -D__WIN95__ -D__WIN32__ -DMWIN -DMICROWIN_NOCONTROLS -DMICROWIN_TODO=1"
+ fi
+
+ if test "$wxUSE_X11" = 1; then
+ # If we find X, set shell vars x_includes and x_libraries to the
+# paths, otherwise set no_x=yes.
+# Uses ac_ vars as temps to allow command line to override cache and checks.
+# --without-x overrides everything else, but does not touch the cache.
+echo $ac_n "checking for X""... $ac_c" 1>&6
+echo "configure:12930: checking for X" >&5
+
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+ withval="$with_x"
+ :
+fi
+
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+ # The user explicitly disabled X.
+ have_x=disabled
+else
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=NO ac_x_libraries=NO
+rm -fr conftestdir
+if mkdir conftestdir; then
+ cd conftestdir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat > Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl; do
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
+ ac_im_usrlibdir=$ac_im_libdir; break
+ fi
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case "$ac_im_incroot" in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+ esac
+ case "$ac_im_usrlibdir" in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftestdir
+fi
+
+if test "$ac_x_includes" = NO; then
+ # Guess where to find include files, by looking for this one X11 .h file.
+ test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+
+ # First, try using that file with no special directory specified.
+cat > conftest.$ac_ext <<EOF
+#line 12992 "configure"
+#include "confdefs.h"
+#include <$x_direct_test_include>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:12997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ # Look for the header file in a standard set of common directories.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ for ac_dir in \
+ /usr/X11/include \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11 \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11/include \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11 \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ ; \
+ do
+ if test -r "$ac_dir/$x_direct_test_include"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+ done
+fi
+rm -f conftest*
+fi # $ac_x_includes = NO
+
+if test "$ac_x_libraries" = NO; then
+ # Check for the libraries.
+
+ test -z "$x_direct_test_library" && x_direct_test_library=Xt
+ test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+
+ # See if we find them without any special options.
+ # Don't add to $LIBS permanently.
+ ac_save_LIBS="$LIBS"
+ LIBS="-l$x_direct_test_library $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13066 "configure"
+#include "confdefs.h"
+
+int main() {
+${x_direct_test_function}()
+; return 0; }
+EOF
+if { (eval echo configure:13073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# We can link X programs with no special library path.
+ac_x_libraries=
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# First see if replacing the include by lib works.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
+ /usr/X11/lib \
+ /usr/X11R6/lib \
+ /usr/X11R5/lib \
+ /usr/X11R4/lib \
+ \
+ /usr/lib/X11 \
+ /usr/lib/X11R6 \
+ /usr/lib/X11R5 \
+ /usr/lib/X11R4 \
+ \
+ /usr/local/X11/lib \
+ /usr/local/X11R6/lib \
+ /usr/local/X11R5/lib \
+ /usr/local/X11R4/lib \
+ \
+ /usr/local/lib/X11 \
+ /usr/local/lib/X11R6 \
+ /usr/local/lib/X11R5 \
+ /usr/local/lib/X11R4 \
+ \
+ /usr/X386/lib \
+ /usr/x386/lib \
+ /usr/XFree86/lib/X11 \
+ \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /usr/athena/lib \
+ /usr/local/x11r5/lib \
+ /usr/lpp/Xamples/lib \
+ /lib/usr/lib/X11 \
+ \
+ /usr/openwin/lib \
+ /usr/openwin/share/lib \
+ ; \
+do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+ ac_x_libraries=$ac_dir
+ break 2
+ fi
+ done
+done
+fi
+rm -f conftest*
+fi # $ac_x_libraries = NO
+
+if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
+ # Didn't find X anywhere. Cache the known absence of X.
+ ac_cv_have_x="have_x=no"
+else
+ # Record where we found X for the cache.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+ fi
+ eval "$ac_cv_have_x"
+fi # $with_x != no
+
+if test "$have_x" != yes; then
+ echo "$ac_t""$have_x" 1>&6
+ no_x=yes
+else
+ # If each of the values was on the command line, it overrides each guess.
+ test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+ # Update the cache value to reflect the command line values.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+ echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+fi
+
+if test "$no_x" = yes; then
+ # Not all programs may use this symbol, but it does not hurt to define it.
+ cat >> confdefs.h <<\EOF
+#define X_DISPLAY_MISSING 1
+EOF
+
+ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
+else
+ if test -n "$x_includes"; then
+ X_CFLAGS="$X_CFLAGS -I$x_includes"
+ fi
+
+ # It would also be nice to do this for all -L options, not just this one.
+ if test -n "$x_libraries"; then
+ X_LIBS="$X_LIBS -L$x_libraries"
+ # For Solaris; some versions of Sun CC require a space after -R and
+ # others require no space. Words are not sufficient . . . .
+ case "`(uname -sr) 2>/dev/null`" in
+ "SunOS 5"*)
+ echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
+echo "configure:13179: checking whether -R must be followed by a space" >&5
+ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 13182 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:13189: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_nospace=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_nospace=no
+fi
+rm -f conftest*
+ if test $ac_R_nospace = yes; then
+ echo "$ac_t""no" 1>&6
+ X_LIBS="$X_LIBS -R$x_libraries"
+ else
+ LIBS="$ac_xsave_LIBS -R $x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 13205 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:13212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_space=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_space=no
+fi
+rm -f conftest*
+ if test $ac_R_space = yes; then
+ echo "$ac_t""yes" 1>&6
+ X_LIBS="$X_LIBS -R $x_libraries"
+ else
+ echo "$ac_t""neither works" 1>&6
+ fi
+ fi
+ LIBS="$ac_xsave_LIBS"
+ esac
+ fi
+
+ # Check for system-dependent libraries X programs must link with.
+ # Do this before checking for the system-independent R6 libraries
+ # (-lICE), since we may need -lsocket or whatever for X linking.
+
+ if test "$ISC" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
+ else
+ # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
+ # libraries were built with DECnet support. And karl@cs.umb.edu says
+ # the Alpha needs dnet_stub (dnet does not exist).
+ echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
+echo "configure:13244: checking for dnet_ntoa in -ldnet" >&5
+ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13252 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:13263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
+echo "configure:13285: checking for dnet_ntoa in -ldnet_stub" >&5
+ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet_stub $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13293 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:13304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
+ # to get the SysV transport functions.
+ # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
+ # needs -lnsl.
+ # The nsl library prevents programs from opening the X display
+ # on Irix 5.2, according to dickey@clark.net.
+ echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
+echo "configure:13333: checking for gethostbyname" >&5
+if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 13338 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char gethostbyname(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
+choke me
+#else
+gethostbyname();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:13361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_gethostbyname = no; then
+ echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
+echo "configure:13382: checking for gethostbyname in -lnsl" >&5
+ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13390 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:13401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # lieder@skyler.mavd.honeywell.com says without -lsocket,
+ # socket/setsockopt and other routines are undefined under SCO ODT
+ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
+ # on later versions), says simon@lia.di.epfl.ch: it contains
+ # gethostby* variants that don't use the nameserver (or something).
+ # -lsocket must be given before -lnsl if both are needed.
+ # We assume that if connect needs -lnsl, so does gethostbyname.
+ echo $ac_n "checking for connect""... $ac_c" 1>&6
+echo "configure:13431: checking for connect" >&5
+if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 13436 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char connect(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_connect) || defined (__stub___connect)
+choke me
+#else
+connect();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:13459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_connect=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_connect=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_connect = no; then
+ echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
+echo "configure:13480: checking for connect in -lsocket" >&5
+ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13488 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+connect()
+; return 0; }
+EOF
+if { (eval echo configure:13499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
+ echo $ac_n "checking for remove""... $ac_c" 1>&6
+echo "configure:13523: checking for remove" >&5
+if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 13528 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char remove(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_remove) || defined (__stub___remove)
+choke me
+#else
+remove();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:13551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_remove=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_remove=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_remove = no; then
+ echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
+echo "configure:13572: checking for remove in -lposix" >&5
+ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lposix $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13580 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove();
+
+int main() {
+remove()
+; return 0; }
+EOF
+if { (eval echo configure:13591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ echo $ac_n "checking for shmat""... $ac_c" 1>&6
+echo "configure:13615: checking for shmat" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 13620 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shmat(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shmat) || defined (__stub___shmat)
+choke me
+#else
+shmat();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:13643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_shmat=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_shmat=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_shmat = no; then
+ echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
+echo "configure:13664: checking for shmat in -lipc" >&5
+ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lipc $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13672 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat();
+
+int main() {
+shmat()
+; return 0; }
+EOF
+if { (eval echo configure:13683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ fi
+
+ # Check for libraries that X11R6 Xt/Xaw programs need.
+ ac_save_LDFLAGS="$LDFLAGS"
+ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
+ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+ # check for ICE first), but we must link in the order -lSM -lICE or
+ # we get undefined symbols. So assume we have SM if we have ICE.
+ # These have to be linked with before -lX11, unlike the other
+ # libraries we check for below, so use a different variable.
+ # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
+ echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
+echo "configure:13716: checking for IceConnectionNumber in -lICE" >&5
+ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13724 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char IceConnectionNumber();
+
+int main() {
+IceConnectionNumber()
+; return 0; }
+EOF
+if { (eval echo configure:13735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ LDFLAGS="$ac_save_LDFLAGS"
+
+fi
+
+
+ if test "$no_x" = "yes"; then
+ { echo "configure: error: X11 not found" 1>&2; exit 1; }
+ fi
+
+ GUI_TK_LIBRARY="$X_LIBS"
+ TOOLKIT_INCLUDE="$X_CFLAGS"
+ AFMINSTALL=afminstall
+ COMPILED_X_PROGRAM=0
+
+ if test "$wxUSE_NANOX" = "yes"; then
+ echo $ac_n "checking for MicroWindows/NanoX distribution""... $ac_c" 1>&6
+echo "configure:13771: checking for MicroWindows/NanoX distribution" >&5
+ if test "x$MICROWIN" = x ; then
+ echo "$ac_t""not found" 1>&6
+ { echo "configure: error: Cannot find MicroWindows library. Make sure MICROWIN is set." 1>&2; exit 1; }
+ else
+ echo "$ac_t""$MICROWIN" 1>&6
+ cat >> confdefs.h <<\EOF
+#define wxUSE_NANOX 1
+EOF
+
+ fi
+ fi
+
+ xpm_link=
+ echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
+echo "configure:13786: checking for Xpm library" >&5
+
+ac_find_libraries=
+for ac_dir in $SEARCH_LIB;
+ do
+ for ac_extension in a so sl dylib; do
+ if test -f "$ac_dir/libXpm.$ac_extension"; then
+ ac_find_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+
+ if test "$ac_find_libraries" != "" ; then
+
+ echo "$GUI_TK_LIBRARY" | grep "\-L$ac_find_libraries" > /dev/null
+ result=$?
+ if test $result = 0; then
+ ac_path_to_link=""
+ else
+ ac_path_to_link=" -L$ac_find_libraries"
+ fi
+
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY$ac_path_to_link"
+ xpm_link=" -lXpm"
+ cat >> confdefs.h <<\EOF
+#define wxHAVE_LIB_XPM 1
+EOF
+
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
+ else
+ cat > conftest.$ac_ext <<EOF
+#line 13818 "configure"
+#include "confdefs.h"
+
+ #include <X11/xpm.h>
+
+int main() {
+
+ int version;
+ version = XpmLibraryVersion();
+
+; return 0; }
+EOF
+if { (eval echo configure:13830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+
+ xpm_link=" -lXpm"
+ cat >> confdefs.h <<\EOF
+#define wxHAVE_LIB_XPM 1
+EOF
+
+ echo "$ac_t""found in default search path" 1>&6
+ COMPILED_X_PROGRAM=0
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+
+ echo "$ac_t""no" 1>&6
+ echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
+
+
+fi
+rm -f conftest*
+ fi
+
+ wxUSE_UNIVERSAL="yes"
+
+ if test "$wxUSE_NANOX" = "yes"; then
+ TOOLKIT_INCLUDE="-I\$(top_srcdir)/include/wx/x11/nanox -I\$(MICROWIN)/src/include $TOOLKIT_INCLUDE"
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__NANOX__ -DMWPIXEL_FORMAT=MWPF_TRUECOLOR0888 -DHAVE_FILEIO -DHAVE_BMP_SUPPORT=1 -DHAVE_GIF_SUPPORT=1 -DHAVE_PNM_SUPPORT=1 -DHAVE_XPM_SUPPORT=1 -DLINUX=1 -DUNIX=1 -DUSE_EXPOSURE -DSCREEN_HEIGHT=480 -DSCREEN_WIDTH=640 -DSCREEN_DEPTH=4 -DX11=1"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY \$(MICROWIN)/src/lib/libnano-X.a"
+ else
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lX11$xpm_link"
+ fi
+
+ TOOLKIT_VPATH="\${top_srcdir}/src/x11"
+ TOOLKIT=X11
+ GUIDIST=X11_DIST
+ fi
+
+ if test "$wxUSE_WINE" = 1; then
+ ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for windows.h""... $ac_c" 1>&6
+echo "configure:13872: checking for windows.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 13877 "configure"
+#include "confdefs.h"
+#include <windows.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:13882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+
+ { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
+
+fi
+
+
+ xpm_link=
+ echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
+echo "configure:13909: checking for Xpm library" >&5
+
+ac_find_libraries=
+for ac_dir in $SEARCH_LIB;
+ do
+ for ac_extension in a so sl dylib; do
+ if test -f "$ac_dir/libXpm.$ac_extension"; then
+ ac_find_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="-L$ac_find_libraries"
+ xpm_link=" -lXpm"
+ cat >> confdefs.h <<\EOF
+#define wxHAVE_LIB_XPM 1
+EOF
+
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
+ fi
+
+ mesa_link=
+ echo $ac_n "checking for Mesa library""... $ac_c" 1>&6
+echo "configure:13937: checking for Mesa library" >&5
+
+ac_find_libraries=
+for ac_dir in $SEARCH_LIB;
+ do
+ for ac_extension in a so sl dylib; do
+ if test -f "$ac_dir/libMesaGL.$ac_extension"; then
+ ac_find_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries"
+ mesa_link=" -lMesaGL"
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
+ else
+ { echo "configure: error: no" 1>&2; exit 1; }
+ fi
+
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lwine$mesa_link$xpm_link -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses"
+ TOOLKIT=MSW
+ GUIDIST=MSW_DIST
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXWINE__"
+ fi
+
+ if test "$wxUSE_MOTIF" = 1; then
+ if test "$no_x" = yes; then
+ # Not all programs may use this symbol, but it does not hurt to define it.
+ cat >> confdefs.h <<\EOF
+#define X_DISPLAY_MISSING 1
+EOF
+
+ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
+else
+ if test -n "$x_includes"; then
+ X_CFLAGS="$X_CFLAGS -I$x_includes"
+ fi
+
+ # It would also be nice to do this for all -L options, not just this one.
+ if test -n "$x_libraries"; then
+ X_LIBS="$X_LIBS -L$x_libraries"
+ # For Solaris; some versions of Sun CC require a space after -R and
+ # others require no space. Words are not sufficient . . . .
+ case "`(uname -sr) 2>/dev/null`" in
+ "SunOS 5"*)
+ echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
+echo "configure:13985: checking whether -R must be followed by a space" >&5
+ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 13988 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:13995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_nospace=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_nospace=no
+fi
+rm -f conftest*
+ if test $ac_R_nospace = yes; then
+ echo "$ac_t""no" 1>&6
+ X_LIBS="$X_LIBS -R$x_libraries"
+ else
+ LIBS="$ac_xsave_LIBS -R $x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 14011 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:14018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_space=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_space=no
+fi
+rm -f conftest*
+ if test $ac_R_space = yes; then
+ echo "$ac_t""yes" 1>&6
+ X_LIBS="$X_LIBS -R $x_libraries"
+ else
+ echo "$ac_t""neither works" 1>&6
+ fi
+ fi
+ LIBS="$ac_xsave_LIBS"
+ esac
+ fi
+
+ # Check for system-dependent libraries X programs must link with.
+ # Do this before checking for the system-independent R6 libraries
+ # (-lICE), since we may need -lsocket or whatever for X linking.
+
+ if test "$ISC" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
+ else
+ # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
+ # libraries were built with DECnet support. And karl@cs.umb.edu says
+ # the Alpha needs dnet_stub (dnet does not exist).
+ echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
+echo "configure:14050: checking for dnet_ntoa in -ldnet" >&5
+ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 14058 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:14069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
+echo "configure:14091: checking for dnet_ntoa in -ldnet_stub" >&5
+ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet_stub $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 14099 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:14110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
+ # to get the SysV transport functions.
+ # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
+ # needs -lnsl.
+ # The nsl library prevents programs from opening the X display
+ # on Irix 5.2, according to dickey@clark.net.
+ echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
+echo "configure:14139: checking for gethostbyname" >&5
+if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 14144 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char gethostbyname(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
+choke me
+#else
+gethostbyname();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:14167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_gethostbyname = no; then
+ echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
+echo "configure:14188: checking for gethostbyname in -lnsl" >&5
+ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 14196 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:14207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
projects / wxWidgets.git / blobdiff