// Purpose: interface of wxStreamBase and its derived classes
// Author: wxWidgets team
// RCS-ID: $Id$
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
+
/**
- @class wxCountingOutputStream
+ These enumeration values are returned by various functions in the context
+ of wxStream classes.
+*/
+enum wxStreamError
+{
+ wxSTREAM_NO_ERROR = 0, //!< No error occurred.
+ wxSTREAM_EOF, //!< EOF reached in Read() or similar.
+ wxSTREAM_WRITE_ERROR, //!< generic write error on the last write call.
+ wxSTREAM_READ_ERROR //!< generic read error on the last read call.
+};
- wxCountingOutputStream is a specialized output stream which does not write any
- data anywhere, instead it counts how many bytes would get written if this were a
- normal stream. This can sometimes be useful or required if some data gets
- serialized to a stream or compressed by using stream compression and thus the
- final size of the stream cannot be known other than pretending to write the stream.
- One case where the resulting size would have to be known is if the data has
- to be written to a piece of memory and the memory has to be allocated before
- writing to it (which is probably always the case when writing to a memory stream).
+/**
+ @class wxStreamBase
+
+ This class is the base class of most stream related classes in wxWidgets.
+ It must not be used directly.
@library{wxbase}
@category{streams}
+
+ @see wxStreamBuffer
*/
-class wxCountingOutputStream : public wxOutputStream
+class wxStreamBase
{
public:
/**
- Creates a wxCountingOutputStream object.
+ Creates a dummy stream object. It doesn't do anything.
*/
- wxCountingOutputStream();
+ wxStreamBase();
/**
Destructor.
*/
- virtual ~wxCountingOutputStream();
+ virtual ~wxStreamBase();
/**
- Returns the current size of the stream.
+ This function returns the last error.
*/
- size_t GetSize() const;
-};
+ wxStreamError GetLastError() const;
+ /**
+ Returns the length of the stream in bytes. If the length cannot be
+ determined (this is always the case for socket streams for example),
+ returns ::wxInvalidOffset.
+ @since 2.5.4
+ */
+ virtual wxFileOffset GetLength() const;
-/**
- @class wxBufferedInputStream
+ /**
+ This function returns the size of the stream.
+ For example, for a file it is the size of the file.
- This stream acts as a cache. It caches the bytes read from the specified
- input stream (see wxFilterInputStream).
- It uses wxStreamBuffer and sets the default in-buffer size to 1024 bytes.
- This class may not be used without some other stream to read the data
- from (such as a file stream or a memory stream).
+ @warning
+ There are streams which do not have size by definition, such as socket
+ streams. In that cases, GetSize() returns 0 so you should always test its
+ return value.
+ */
+ virtual size_t GetSize() const;
- @library{wxbase}
- @category{streams}
+ /**
+ Returns @true if no error occurred on the stream.
+
+ @see GetLastError()
+ */
+ virtual bool IsOk() const;
- @see wxStreamBuffer, wxInputStream, wxBufferedOutputStream
-*/
-class wxBufferedInputStream : public wxFilterInputStream
-{
-public:
/**
- Constructor.
- If a non @NULL buffer is given to the stream, it will be deleted by it.
+ Returns @true if the stream supports seeking to arbitrary offsets.
*/
- wxBufferedInputStream(wxInputStream& stream,
- wxStreamBuffer *buffer = NULL);
+ virtual bool IsSeekable() const;
/**
- Destructor.
+ Resets the stream state.
+
+ By default, resets the stream to good state, i.e. clears any errors.
+ Since wxWidgets 2.9.3 can be also used to explicitly set the state to
+ the specified error (the @a error argument didn't exist in the previous
+ versions).
+
+ @see GetLastError()
+ */
+ void Reset(wxStreamError error = wxSTREAM_NO_ERROR);
+
+ /**
+ Returns the opposite of IsOk().
+ You can use this function to test the validity of the stream as if
+ it was a pointer:
+
+ @code
+ bool DoSomething(wxInputStream& stream)
+ {
+ wxInt32 data;
+ if (!stream.Read(&data, 4))
+ return false;
+ ...
+ }
+ @endcode
*/
- virtual ~wxBufferedInputStream();
-};
+ bool operator!() const;
+
+protected:
+
+ /**
+ Internal function.
+ It is called when the stream needs to change the current position.
+
+ @param pos
+ Offset to seek to.
+ @param mode
+ One of the ::wxSeekMode enumeration values.
+ @return The new stream position or ::wxInvalidOffset on error.
+ */
+ virtual wxFileOffset OnSysSeek(wxFileOffset pos, wxSeekMode mode);
+
+ /**
+ Internal function.
+ It is called when the stream needs to know the real position.
+ @return The current stream position.
+ */
+ virtual wxFileOffset OnSysTell() const;
+};
/**
@class wxStreamBuffer
- @todo WRITE A DESCRIPTION
+ wxStreamBuffer is a cache manager for wxStreamBase: it manages a stream buffer
+ linked to a stream.
+
+ Each stream always has one autoinitialized stream buffer, but you may
+ attach more of them to the same stream.
@library{wxbase}
@category{streams}
- @see wxStreamBase
+ @see wxStreamBase, @ref overview_stream
*/
class wxStreamBuffer
{
public:
+ /** BufMode flags */
+ enum BufMode
+ {
+ read,
+ write,
+ read_write
+ };
/**
Constructor, creates a new stream buffer using @a stream as a parent stream
@code
streambuffer.Read(...);
- streambuffer2.Read(...); // This call erases previous error messages set by 'streambuffer'
+ streambuffer2.Read(...);
+ // This call erases previous error messages set by 'streambuffer'
+ // assuming that both instances are stream buffers for the same stream
@endcode
@see SetBufferIO()
*/
wxStreamBuffer(wxStreamBase& stream, BufMode mode);
+ /**
+ Constructor for an input buffer of the specified size.
+
+ Using it is equivalent to using the constructor above with read mode
+ and calling SetBufferIO() but is more convenient.
+
+ @since 2.9.0
+
+ @param bufsize
+ The size of buffer in bytes.
+ @param stream
+ The associated input stream, the buffer will be used in read mode.
+ */
+ wxStreamBuffer(size_t bufsize, wxInputStream& stream);
+
+ /**
+ Constructor for an output buffer of the specified size.
+
+ Using it is equivalent to using the constructor above with write mode
+ and calling SetBufferIO() but is more convenient.
+
+ @since 2.9.0
+
+ @param bufsize
+ The size of buffer in bytes.
+ @param stream
+ The associated output stream, the buffer will be used in write mode.
+ */
+ wxStreamBuffer(size_t bufsize, wxOutputStream& stream);
+
/**
Constructor; creates a new empty stream buffer which won't flush any data
to a stream. mode specifies the type of the buffer (read, write, read_write).
wxStreamBuffer(BufMode mode);
/**
- Constructor.
+ Copy constructor.
This method initializes the stream buffer with the data of the specified
stream buffer. The new stream buffer has the same attributes, size, position
Destructor.
It finalizes all IO calls and frees all internal buffers if necessary.
*/
- wxStreamBuffer();
+ ~wxStreamBuffer();
/**
Fill the IO buffer.
@see Write()
*/
- Return value size_t Read(wxStreamBuffer* buffer);
+ size_t Read(wxStreamBuffer* buffer);
/**
Resets to the initial state variables concerning the buffer.
@return Upon successful completion, it returns the new offset as
measured in bytes from the beginning of the stream.
- Otherwise, it returns wxInvalidOffset.
+ Otherwise, it returns ::wxInvalidOffset.
*/
virtual wxFileOffset Seek(wxFileOffset pos, wxSeekMode mode);
@see wxStreamBuffer(), Fixed(), Flushable()
*/
- void SetBufferIO(char* buffer_start, char* buffer_end);
+ void SetBufferIO(void* start, void* end, bool takeOwnership = false);
/**
Destroys or invalidates the previous IO buffer and allocates a new one of the
/**
Returns the parent stream of the stream buffer.
+ @deprecated use GetStream() instead
*/
wxStreamBase* Stream();
the stream.
@return Returns the current position in the stream if possible,
- wxInvalidOffset in the other case.
+ ::wxInvalidOffset in the other case.
*/
virtual wxFileOffset Tell() const;
@class wxOutputStream
wxOutputStream is an abstract base class which may not be used directly.
+ It is the base class of all streams which provide a Write() function,
+ i.e. which can be used to output data (e.g. to a file, to a socket, etc).
+
+ If you want to create your own output stream, you'll need to derive from this
+ class and implement the protected OnSysWrite() function only.
@library{wxbase}
@category{streams}
@param mode
One of wxFromStart, wxFromEnd, wxFromCurrent.
- @return The new stream position or wxInvalidOffset on error.
+ @return The new stream position or ::wxInvalidOffset on error.
*/
virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart);
This function returns a reference on the current object, so the user can
test any states of the stream right away.
*/
- wxOutputStream Write(const void* buffer, size_t size);
+ virtual wxOutputStream& Write(const void* buffer, size_t size);
/**
Reads data from the specified input stream and stores them
in the current stream. The data is read until an error is raised
by one of the two streams.
*/
- wxOutputStream Write(wxInputStream& stream_in);
-};
+ wxOutputStream& Write(wxInputStream& stream_in);
+ /**
+ Writes exactly the specified number of bytes from the buffer.
-/**
- Enumeration values used by wxFilterClassFactory.
-*/
-enum wxStreamProtocolType
-{
- wxSTREAM_PROTOCOL, //!< wxFileSystem protocol (should be only one).
- wxSTREAM_MIMETYPE, //!< MIME types the stream handles.
- wxSTREAM_ENCODING, //!< The HTTP Content-Encodings the stream handles.
- wxSTREAM_FILEEXT //!< File extensions the stream handles.
-};
+ Returns @true if exactly @a size bytes were written. Otherwise, returns
+ @false and LastWrite() should be used to retrieve the exact amount of
+ the data written if necessary.
+ This method uses repeated calls to Write() (which may return writing
+ only part of the data) if necessary.
-/**
- @class wxFilterClassFactory
+ @since 2.9.5
+ */
+ bool WriteAll(const void* buffer, size_t size);
- Allows the creation of filter streams to handle compression formats such
- as gzip and bzip2.
+protected:
+ /**
+ Internal function. It is called when the stream wants to write data of the
+ specified size @a bufsize into the given @a buffer.
- For example, given a filename you can search for a factory that will
- handle it and create a stream to decompress it:
+ It should return the size that was actually wrote (which maybe zero if
+ @a bufsize is zero or if an error occurred; in this last case the internal
+ variable @c m_lasterror should be appropriately set).
+ */
+ size_t OnSysWrite(const void* buffer, size_t bufsize);
+};
- @code
- factory = wxFilterClassFactory::Find(filename, wxSTREAM_FILEEXT);
- if (factory)
- stream = factory-NewStream(new wxFFileInputStream(filename));
- @endcode
- wxFilterClassFactory::Find can also search for a factory by MIME type,
- HTTP encoding or by wxFileSystem protocol.
- The available factories can be enumerated using wxFilterClassFactory::GetFirst()
- and wxFilterClassFactory::GetNext().
+/**
+ @class wxInputStream
+
+ wxInputStream is an abstract base class which may not be used directly.
+ It is the base class of all streams which provide a Read() function,
+ i.e. which can be used to read data from a source (e.g. a file, a socket, etc).
+
+ If you want to create your own input stream, you'll need to derive from this
+ class and implement the protected OnSysRead() function only.
@library{wxbase}
@category{streams}
-
- @see wxFilterInputStream, wxFilterOutputStream, wxArchiveClassFactory,
- @ref overview_archive
*/
-class wxFilterClassFactory : public wxObject
+class wxInputStream : public wxStreamBase
{
public:
/**
- Returns @true if this factory can handle the given protocol, MIME type, HTTP
- encoding or file extension.
-
- When using @c wxSTREAM_FILEEXT for the second parameter, the first parameter
- can be a complete filename rather than just an extension.
+ Creates a dummy input stream.
*/
- bool CanHandle(const wxString& protocol,
- wxStreamProtocolType type = wxSTREAM_PROTOCOL) const;
+ wxInputStream();
/**
- A static member that finds a factory that can handle a given protocol, MIME
- type, HTTP encoding or file extension. Returns a pointer to the class
- factory if found, or @NULL otherwise.
- It does not give away ownership of the factory.
-
- When using @c wxSTREAM_FILEEXT for the second parameter, the first parameter
- can be a complete filename rather than just an extension.
+ Destructor.
*/
- static const wxFilterClassFactory* Find(const wxString& protocol,
- wxStreamProtocolType type = wxSTREAM_PROTOCOL);
+ virtual ~wxInputStream();
- //@{
/**
- GetFirst and GetNext can be used to enumerate the available factories.
- For example, to list them:
+ Returns @true if some data is available in the stream right now, so that
+ calling Read() wouldn't block.
+ */
+ virtual bool CanRead() const;
- @code
- wxString list;
- const wxFilterClassFactory *factory = wxFilterClassFactory::GetFirst();
+ /**
+ Returns @true after an attempt has been made to read past the end of the
+ stream.
+ */
+ virtual bool Eof() const;
- while (factory) {
- list << factory->GetProtocol() << _T("\n");
- factory = factory->GetNext();
- }
- @endcode
+ /**
+ Returns the first character in the input queue and removes it,
+ blocking until it appears if necessary.
- GetFirst()/GetNext() return a pointer to a factory or @NULL if no more
- are available. They do not give away ownership of the factory.
+ On success returns a value between 0 - 255; on end of file returns @c wxEOF.
*/
- static const wxFilterClassFactory* GetFirst() const;
- const wxFilterClassFactory* GetNext() const;
- //@}
+ int GetC();
/**
- Returns the wxFileSystem protocol supported by this factory.
- Equivalent to @code wxString(*GetProtocols()) @endcode.
+ Returns the last number of bytes read.
*/
- wxString GetProtocol() const;
+ virtual size_t LastRead() const;
/**
- Returns the protocols, MIME types, HTTP encodings or file extensions
- supported by this factory, as an array of null terminated strings.
- It does not give away ownership of the array or strings.
+ Returns the first character in the input queue without removing it.
+ */
+ virtual char Peek();
- For example, to list the file extensions a factory supports:
+ /**
+ Reads the specified amount of bytes and stores the data in buffer.
+ To check if the call was successful you must use LastRead() to check
+ if this call did actually read @a size bytes (if it didn't, GetLastError()
+ should return a meaningful value).
- @code
- wxString list;
- const wxChar *const *p;
+ @warning
+ The buffer absolutely needs to have at least the specified size.
- for (p = factory->GetProtocols(wxSTREAM_FILEEXT); *p; p++)
- list << *p << _T("\n");
- @endcode
+ @return This function returns a reference on the current object, so the
+ user can test any states of the stream right away.
*/
- virtual const wxChar * const* GetProtocols(wxStreamProtocolType type = wxSTREAM_PROTOCOL) const = 0;
+ virtual wxInputStream& Read(void* buffer, size_t size);
- //@{
/**
- Create a new input or output stream to decompress or compress a given stream.
+ Reads data from the input queue and stores it in the specified output stream.
+ The data is read until an error is raised by one of the two streams.
- If the parent stream is passed as a pointer then the new filter stream
- takes ownership of it. If it is passed by reference then it does not.
+ @return This function returns a reference on the current object, so the
+ user can test any states of the stream right away.
*/
- wxFilterInputStream* NewStream(wxInputStream& stream) const;
- wxFilterOutputStream* NewStream(wxOutputStream& stream) const;
- wxFilterInputStream* NewStream(wxInputStream* stream) const;
- wxFilterOutputStream* NewStream(wxOutputStream* stream) const;
- //@}
+ wxInputStream& Read(wxOutputStream& stream_out);
/**
- Remove the file extension of @a location if it is one of the file
- extensions handled by this factory.
+ Reads exactly the specified number of bytes into the buffer.
+
+ Returns @true only if the entire amount of data was read, otherwise
+ @false is returned and the number of bytes really read can be retrieved
+ using LastRead(), as with Read().
+
+ This method uses repeated calls to Read() (which may return after
+ reading less than the requested number of bytes) if necessary.
+
+ @warning
+ The buffer absolutely needs to have at least the specified size.
+
+ @since 2.9.5
*/
- wxString PopExtension(const wxString& location) const;
+ bool ReadAll(void* buffer, size_t size);
/**
- Adds this class factory to the list returned by GetFirst()/GetNext().
+ Changes the stream current position.
- It is not necessary to do this to use the filter streams. It is usually
- used when implementing streams, typically the implementation will
- add a static instance of its factory class.
+ This operation in general is possible only for seekable streams
+ (see wxStreamBase::IsSeekable()); non-seekable streams support only
+ seeking positive amounts in mode @c wxFromCurrent (this is implemented
+ by reading data and simply discarding it).
+
+ @param pos
+ Offset to seek to.
+ @param mode
+ One of wxFromStart, wxFromEnd, wxFromCurrent.
+
+ @return The new stream position or ::wxInvalidOffset on error.
+ */
+ virtual wxFileOffset SeekI(wxFileOffset pos, wxSeekMode mode = wxFromStart);
+
+ /**
+ Returns the current stream position or ::wxInvalidOffset if it's not
+ available (e.g. socket streams do not have a size nor a current stream
+ position).
+ */
+ virtual wxFileOffset TellI() const;
+
+ /**
+ This function is only useful in read mode.
+ It is the manager of the "Write-Back" buffer. This buffer acts like a
+ temporary buffer where data which has to be read during the next read IO
+ call are put. This is useful when you get a big block of data which you
+ didn't want to read: you can replace them at the top of the input queue
+ by this way.
+
+ Be very careful about this call in connection with calling SeekI() on
+ the same stream. Any call to SeekI() will invalidate any previous call
+ to this method (otherwise you could SeekI() to one position, "unread" a
+ few bytes there, SeekI() to another position and data would be either
+ lost or corrupted).
+
+ @return Returns the amount of bytes saved in the Write-Back buffer.
+ */
+ size_t Ungetch(const void* buffer, size_t size);
+
+ /**
+ This function acts like the previous one except that it takes only one
+ character: it is sometimes shorter to use than the generic function.
+ */
+ bool Ungetch(char c);
+
+protected:
+
+ /**
+ Internal function. It is called when the stream wants to read data of the
+ specified size @a bufsize and wants it to be placed inside @a buffer.
+
+ It should return the size that was actually read or zero if EOF has been
+ reached or an error occurred (in this last case the internal @c m_lasterror
+ variable should be set accordingly as well).
+ */
+ size_t OnSysRead(void* buffer, size_t bufsize) = 0;
+};
+
+
+
+
+/**
+ @class wxCountingOutputStream
+
+ wxCountingOutputStream is a specialized output stream which does not write any
+ data anywhere, instead it counts how many bytes would get written if this were a
+ normal stream. This can sometimes be useful or required if some data gets
+ serialized to a stream or compressed by using stream compression and thus the
+ final size of the stream cannot be known other than pretending to write the stream.
+ One case where the resulting size would have to be known is if the data has
+ to be written to a piece of memory and the memory has to be allocated before
+ writing to it (which is probably always the case when writing to a memory stream).
+
+ @library{wxbase}
+ @category{streams}
+*/
+class wxCountingOutputStream : public wxOutputStream
+{
+public:
+ /**
+ Creates a wxCountingOutputStream object.
+ */
+ wxCountingOutputStream();
+
+ /**
+ Destructor.
+ */
+ virtual ~wxCountingOutputStream();
+
+ /**
+ Returns the current length of the stream.
+
+ This is the amount of data written to the stream so far, in bytes.
+ */
+ virtual wxFileOffset GetLength() const;
+};
+
+
+/**
+ @class wxBufferedInputStream
+
+ This stream acts as a cache. It caches the bytes read from the specified
+ input stream (see wxFilterInputStream).
+ It uses wxStreamBuffer and sets the default in-buffer size to 1024 bytes.
+ This class may not be used without some other stream to read the data
+ from (such as a file stream or a memory stream).
+
+ @library{wxbase}
+ @category{streams}
+
+ @see wxStreamBuffer, wxInputStream, wxBufferedOutputStream
+*/
+class wxBufferedInputStream : public wxFilterInputStream
+{
+public:
+ /**
+ Constructor using the provided buffer or default.
+
+ @param stream
+ The associated low-level stream.
+ @param buffer
+ The buffer to use if non-@NULL. Notice that the ownership of this
+ buffer is taken by the stream, i.e. it will delete it. If this
+ parameter is @NULL a default 1KB buffer is used.
+ */
+ wxBufferedInputStream(wxInputStream& stream,
+ wxStreamBuffer *buffer = NULL);
+
+ /**
+ Constructor allowing to specify the size of the buffer.
+
+ This is just a more convenient alternative to creating a wxStreamBuffer
+ of the given size and using the other overloaded constructor of this
+ class.
+
+ @param stream
+ The associated low-level stream.
+ @param bufsize
+ The size of the buffer, in bytes.
+
+ @since 2.9.0
+ */
+ wxBufferedInputStream(wxInputStream& stream, size_t bufsize);
+
+ /**
+ Destructor.
+ */
+ virtual ~wxBufferedInputStream();
+};
+
+
+
+
+/**
+ Enumeration values used by wxFilterClassFactory.
+*/
+enum wxStreamProtocolType
+{
+ wxSTREAM_PROTOCOL, //!< wxFileSystem protocol (should be only one).
+ wxSTREAM_MIMETYPE, //!< MIME types the stream handles.
+ wxSTREAM_ENCODING, //!< The HTTP Content-Encodings the stream handles.
+ wxSTREAM_FILEEXT //!< File extensions the stream handles.
+};
+
+/**
+ @class wxFilterClassFactory
+
+ Allows the creation of filter streams to handle compression formats such
+ as gzip and bzip2.
+
+ For example, given a filename you can search for a factory that will
+ handle it and create a stream to decompress it:
+
+ @code
+ factory = wxFilterClassFactory::Find(filename, wxSTREAM_FILEEXT);
+ if (factory)
+ stream = factory->NewStream(new wxFFileInputStream(filename));
+ @endcode
+
+ wxFilterClassFactory::Find can also search for a factory by MIME type,
+ HTTP encoding or by wxFileSystem protocol.
+ The available factories can be enumerated using wxFilterClassFactory::GetFirst()
+ and wxFilterClassFactory::GetNext().
+
+ @library{wxbase}
+ @category{streams}
+
+ @see wxFilterInputStream, wxFilterOutputStream, wxArchiveClassFactory,
+ @ref overview_archive
+*/
+class wxFilterClassFactory : public wxObject
+{
+public:
+ /**
+ Returns @true if this factory can handle the given protocol, MIME type, HTTP
+ encoding or file extension.
+
+ When using @c wxSTREAM_FILEEXT for the second parameter, the first parameter
+ can be a complete filename rather than just an extension.
+ */
+ bool CanHandle(const wxString& protocol,
+ wxStreamProtocolType type = wxSTREAM_PROTOCOL) const;
+
+ /**
+ A static member that finds a factory that can handle a given protocol, MIME
+ type, HTTP encoding or file extension. Returns a pointer to the class
+ factory if found, or @NULL otherwise.
+ It does not give away ownership of the factory.
+
+ When using @c wxSTREAM_FILEEXT for the second parameter, the first parameter
+ can be a complete filename rather than just an extension.
+ */
+ static const wxFilterClassFactory* Find(const wxString& protocol,
+ wxStreamProtocolType type = wxSTREAM_PROTOCOL);
+
+ //@{
+ /**
+ GetFirst and GetNext can be used to enumerate the available factories.
+ For example, to list them:
+
+ @code
+ wxString list;
+ const wxFilterClassFactory *factory = wxFilterClassFactory::GetFirst();
+
+ while (factory) {
+ list << factory->GetProtocol() << wxT("\n");
+ factory = factory->GetNext();
+ }
+ @endcode
+
+ GetFirst()/GetNext() return a pointer to a factory or @NULL if no more
+ are available. They do not give away ownership of the factory.
+ */
+ static const wxFilterClassFactory* GetFirst();
+ const wxFilterClassFactory* GetNext() const;
+ //@}
+
+ /**
+ Returns the wxFileSystem protocol supported by this factory.
+ Equivalent to @code wxString(*GetProtocols()) @endcode.
+ */
+ wxString GetProtocol() const;
+
+ /**
+ Returns the protocols, MIME types, HTTP encodings or file extensions
+ supported by this factory, as an array of null terminated strings.
+ It does not give away ownership of the array or strings.
+
+ For example, to list the file extensions a factory supports:
+
+ @code
+ wxString list;
+ const wxChar *const *p;
+
+ for (p = factory->GetProtocols(wxSTREAM_FILEEXT); *p; p++)
+ list << *p << wxT("\n");
+ @endcode
+ */
+ virtual const wxChar * const* GetProtocols(wxStreamProtocolType type = wxSTREAM_PROTOCOL) const = 0;
+
+ //@{
+ /**
+ Create a new input or output stream to decompress or compress a given stream.
+
+ If the parent stream is passed as a pointer then the new filter stream
+ takes ownership of it. If it is passed by reference then it does not.
+ */
+ virtual wxFilterInputStream* NewStream(wxInputStream& stream) const = 0;
+ virtual wxFilterOutputStream* NewStream(wxOutputStream& stream) const = 0;
+ virtual wxFilterInputStream* NewStream(wxInputStream* stream) const = 0;
+ virtual wxFilterOutputStream* NewStream(wxOutputStream* stream) const = 0;
+ //@}
+
+ /**
+ Remove the file extension of @a location if it is one of the file
+ extensions handled by this factory.
+ */
+ wxString PopExtension(const wxString& location) const;
+
+ /**
+ Adds this class factory to the list returned by GetFirst()/GetNext().
+
+ It is not necessary to do this to use the filter streams. It is usually
+ used when implementing streams, typically the implementation will
+ add a static instance of its factory class.
It can also be used to change the order of a factory already in the list,
bringing it to the front. This isn't a thread safe operation so can't be
{
public:
/**
- @todo WRITE DESCRIPTION
+ Constructor using the provided buffer or default.
+
+ @param stream
+ The associated low-level stream.
+ @param buffer
+ The buffer to use if non-@NULL. Notice that the ownership of this
+ buffer is taken by the stream, i.e. it will delete it. If this
+ parameter is @NULL a default 1KB buffer is used.
*/
wxBufferedOutputStream(wxOutputStream& stream,
wxStreamBuffer *buffer = NULL);
- /**
- Destructor. Calls Sync() and destroys the internal buffer.
- */
- virtual ~wxBufferedOutputStream();
/**
- Calls Sync() and changes the stream position.
- */
- virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart)
-
- /**
- Flushes the buffer and calls Sync() on the parent stream.
- */
- virtual void Sync();
-};
-
-
-
-/**
- @class wxInputStream
-
- wxInputStream is an abstract base class which may not be used directly.
+ Constructor allowing to specify the size of the buffer.
- @library{wxbase}
- @category{streams}
-*/
-class wxInputStream : public wxStreamBase
-{
-public:
- /**
- Creates a dummy input stream.
- */
- wxInputStream();
+ This is just a more convenient alternative to creating a wxStreamBuffer
+ of the given size and using the other overloaded constructor of this
+ class.
- /**
- Destructor.
- */
- virtual ~wxInputStream();
-
- /**
- Returns @true if some data is available in the stream right now, so that
- calling Read() wouldn't block.
- */
- virtual bool CanRead() const;
-
- /**
- Returns @true after an attempt has been made to read past the end of the
- stream.
- */
- virtual bool Eof() const;
-
- /**
- Returns the first character in the input queue and removes it,
- blocking until it appears if necessary.
- */
- int GetC();
-
- /**
- Returns the last number of bytes read.
- */
- virtual size_t LastRead() const;
-
- /**
- Returns the first character in the input queue without removing it.
- */
- virtual char Peek();
-
- /**
- Reads the specified amount of bytes and stores the data in buffer.
-
- @warning
- The buffer absolutely needs to have at least the specified size.
-
- @return This function returns a reference on the current object, so the
- user can test any states of the stream right away.
- */
- wxInputStream Read(void* buffer, size_t size);
-
- /**
- Reads data from the input queue and stores it in the specified output stream.
- The data is read until an error is raised by one of the two streams.
-
- @return This function returns a reference on the current object, so the
- user can test any states of the stream right away.
- */
- wxInputStream& Read(wxOutputStream& stream_out);
-
- /**
- Changes the stream current position.
-
- @param pos
- Offset to seek to.
- @param mode
- One of wxFromStart, wxFromEnd, wxFromCurrent.
+ @param stream
+ The associated low-level stream.
+ @param bufsize
+ The size of the buffer, in bytes.
- @return The new stream position or wxInvalidOffset on error.
- */
- virtual wxFileOffset SeekI(wxFileOffset pos, wxSeekMode mode = wxFromStart);
+ @since 2.9.0
+ */
+ wxBufferedOutputStream(wxOutputStream& stream, size_t bufsize);
/**
- Returns the current stream position.
+ Destructor. Calls Sync() and destroys the internal buffer.
*/
- virtual wxFileOffset TellI() const;
+ virtual ~wxBufferedOutputStream();
/**
- This function is only useful in read mode.
- It is the manager of the "Write-Back" buffer. This buffer acts like a
- temporary buffer where data which has to be read during the next read IO
- call are put. This is useful when you get a big block of data which you
- didn't want to read: you can replace them at the top of the input queue
- by this way.
-
- Be very careful about this call in connection with calling SeekI() on
- the same stream. Any call to SeekI() will invalidate any previous call
- to this method (otherwise you could SeekI() to one position, "unread" a
- few bytes there, SeekI() to another position and data would be either
- lost or corrupted).
-
- @return Returns the amount of bytes saved in the Write-Back buffer.
+ Calls Sync() and changes the stream position.
*/
- size_t Ungetch(const char* buffer, size_t size);
+ virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart);
/**
- This function acts like the previous one except that it takes only one
- character: it is sometimes shorter to use than the generic function.
+ Flushes the buffer and calls Sync() on the parent stream.
*/
- Return value bool Ungetch(char c);
+ virtual void Sync();
};
/**
- These enumeration values are returned by various functions in the context
- of wxStream classes.
-*/
-enum wxStreamError
-{
- wxSTREAM_NO_ERROR = 0, //!< No error occurred.
- wxSTREAM_EOF, //!< EOF reached in Read() or similar.
- wxSTREAM_WRITE_ERROR, //!< generic write error on the last write call.
- wxSTREAM_READ_ERROR //!< generic read error on the last read call.
-};
+ @class wxWrapperInputStream
-/**
- @class wxStreamBase
+ A wrapper input stream is a kind of filter stream which forwards all the
+ operations to its base stream. This is useful to build utility classes such
+ as wxFSInputStream.
- This class is the base class of most stream related classes in wxWidgets.
- It must not be used directly.
+ @note
+ The interface of this class is the same as that of wxInputStream.
+ Only a constructor differs and it is documented below.
@library{wxbase}
@category{streams}
- @see wxStreamBuffer
+ @see wxFSInputStream, wxFilterInputStream
+ @since 2.9.4
*/
-class wxStreamBase
+class wxWrapperInputStream : public wxFilterInputStream
{
public:
+ //@{
/**
- Creates a dummy stream object. It doesn't do anything.
- */
- wxStreamBase();
-
- /**
- Destructor.
- */
- virtual ~wxStreamBase();
-
- /**
- This function returns the last error.
- */
- wxStreamError GetLastError() const;
-
- /**
- Returns the length of the stream in bytes. If the length cannot be
- determined (this is always the case for socket streams for example),
- returns @c wxInvalidOffset.
-
- @since 2.5.4
- */
- virtual wxFileOffset GetLength() const;
-
- /**
- This function returns the size of the stream.
- For example, for a file it is the size of the file.
-
- @warning
- There are streams which do not have size by definition, such as socket
- streams. In that cases, GetSize returns 0 so you should always test its
- return value.
- */
- virtual size_t GetSize() const;
-
- /**
- Returns @true if no error occurred on the stream.
-
- @see GetLastError()
- */
- virtual bool IsOk() const;
-
- /**
- Returns @true if the streams supports seeking to arbitrary offsets.
- */
- virtual bool IsSeekable() const;
+ Initializes a wrapper stream.
- /**
- Internal function. It is called when the stream wants to read data of the
- specified size. It should return the size that was actually read.
+ If the parent stream is passed as a pointer then the new wrapper stream
+ takes ownership of it. If it is passed by reference then it does not.
*/
- size_t OnSysRead(void* buffer, size_t bufsize);
+ wxWrapperInputStream(wxInputStream& stream);
+ wxWrapperInputStream(wxInputStream* stream);
+ //@}
+protected:
/**
- See OnSysRead().
- */
- size_t OnSysWrite(const void* buffer, size_t bufsize);
+ Default constructor, use InitParentStream() to finish initialization.
+ This constructor can be used by the derived classes from their own
+ constructors when the parent stream can't be specified immediately.
+ The derived class must call InitParentStream() later to do it.
+ */
+ wxWrapperInputStream();
-protected:
-
+ //@{
/**
- Internal function.
- It is called when the stream needs to change the current position.
- */
- virtual wxFileOffset OnSysSeek(wxFileOffset pos, wxSeekMode mode);
+ Set up the wrapped stream for an object initialized using the default
+ constructor.
- /**
- Internal function.
- It is called when the stream needs to know the real position.
- */
- virtual wxFileOffset OnSysTell() const;
+ The ownership logic is the same as for the non-default constructor,
+ i.e. this object takes ownership of the stream if it's passed by
+ pointer but not if it's passed by reference.
+ */
+ void InitParentStream(wxInputStream& stream);
+ void InitParentStream(wxInputStream* stream);
+ //@}
};
-
projects / wxWidgets.git / blobdiff