\func{bool}{Blit}{\param{wxCoord}{ xdest}, \param{wxCoord}{ ydest}, \param{wxCoord}{ width}, \param{wxCoord}{ height},
\param{wxDC* }{source}, \param{wxCoord}{ xsrc}, \param{wxCoord}{ ysrc}, \param{int}{ logicalFunc = wxCOPY},
- \param{bool }{useMask = FALSE}, \param{wxCoord}{ xsrcMask = -1}, \param{wxCoord}{ ysrcMask = -1}}
+ \param{bool }{useMask = false}, \param{wxCoord}{ xsrcMask = -1}, \param{wxCoord}{ ysrcMask = -1}}
Copy from a source DC to this DC, specifying the destination
coordinates, size of area to copy, source DC, source coordinates,
\docparam{logicalFunc}{Logical function to use: see \helpref{wxDC::SetLogicalFunction}{wxdcsetlogicalfunction}.}
-\docparam{useMask}{If TRUE, Blit does a transparent blit using the mask that is associated with the bitmap
+\docparam{useMask}{If true, Blit does a transparent blit using the mask that is associated with the bitmap
selected into the source device context. The Windows implementation does the following if MaskBlt cannot be used:
\begin{enumerate}
\func{static bool}{CacheEnabled}{\void}
-On supported platforms (currently only Windows), returns TRUE
+On supported platforms (currently only Windows), returns true
if the DC cache is enabled. The DC cache
can speed up the \helpref{Blit}{wxdcblit} operation when
drawing a large number of masked bitmaps.
\func{void}{DrawBitmap}{\param{const wxBitmap\&}{ bitmap}, \param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{bool}{ transparent}}
-Draw a bitmap on the device context at the specified point. If {\it transparent} is TRUE and the bitmap has
+Draw a bitmap on the device context at the specified point. If {\it transparent} is true and the bitmap has
a transparency mask, the bitmap will be drawn transparently.
When drawing a mono-bitmap, the current text foreground colour will be used to draw the foreground
Draws a check mark inside the given rectangle.
+\membersection{wxDC::DrawCircle}\label{wxdcdrawcircle}
+
+\func{void}{DrawCircle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ radius}}
+
+\func{void}{DrawCircle}{\param{const wxPoint\&}{ pt}, \param{wxCoord}{ radius}}
+
+Draws a circle with the given centre and radius.
+
+\wxheading{See also}
+
+\helpref{DrawEllipse}{wxdcdrawellipse}
+
\membersection{wxDC::DrawEllipse}\label{wxdcdrawellipse}
\func{void}{DrawEllipse}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
-Draws an ellipse contained in the rectangle with the given top left corner, and with the
-given size. The current pen is used for the outline and the current brush for
-filling the shape.
+\func{void}{DrawEllipse}{\param{const wxPoint\&}{ pt}, \param{const wxSize\&}{ size}}
+
+\func{void}{DrawEllipse}{\param{const wxRect\&}{ rect}}
+
+Draws an ellipse contained in the rectangle specified either with the given top
+left corner and the given size or directly. The current pen is used for the
+outline and the current brush for filling the shape.
+
+\wxheading{See also}
+
+\helpref{DrawCircle}{wxdcdrawcircle}
\membersection{wxDC::DrawEllipticArc}\label{wxdcdrawellipticarc}
\func{void}{DrawLine}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}}
Draws a line from the first point to the second. The current pen is used
-for drawing the line.
+for drawing the line. Note that the point $(x2, y2)$ is {\emph not} part of the
+line and is not drawn by this function (this is consistent with the behaviour
+of many other toolkits).
\membersection{wxDC::DrawLines}\label{wxdcdrawlines}
\membersection{wxDC::FloodFill}\label{wxdcfloodfill}
-\func{void}{FloodFill}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{const wxColour\&}{ colour}, \param{int}{ style=wxFLOOD\_SURFACE}}
+\func{bool}{FloodFill}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{const wxColour\&}{ colour}, \param{int}{ style=wxFLOOD\_SURFACE}}
Flood fills the device context starting from the given point, using
the {\it current brush colour}, and using a style:
\item wxFLOOD\_BORDER: the area to be flooded is bounded by the given colour.
\end{itemize}
-{\it Note:} this function is available in MS Windows only.
+Returns false if the operation failed.
+
+{\it Note:} The present implementation for non-Windows platforms may fail to find
+colour borders if the pixels do not match the colour exactly. However the
+function will still return true.
\membersection{wxDC::GetBackground}\label{wxdcgetbackground}
\func{bool}{GetOptimization}{\void}
-Returns TRUE if device context optimization is on.
+Returns true if device context optimization is on.
See \helpref{wxDC::SetOptimization}{wxsetoptimization} for details.
\membersection{wxDC::GetPen}\label{wxdcgetpen}
Gets the current user scale factor (set by \helpref{SetUserScale}{wxdcsetuserscale}).
-\perlnote{In wxPerl this method takes no arguments and returna a two element
+\perlnote{In wxPerl this method takes no arguments and return a two element
array {\tt ( x, y )}}
\membersection{wxDC::LogicalToDeviceX}\label{wxdclogicaltodevicex}
\func{bool}{Ok}{\void}
-Returns TRUE if the DC is ok to use.
+Returns true if the DC is ok to use.
\membersection{wxDC::ResetBoundingBox}\label{wxdcresetboundingbox}
in X, text drawing isn't handled consistently with the mapping mode; a
font is always specified in point size. However, setting the {\it
user scale} (see \helpref{wxDC::SetUserScale}{wxdcsetuserscale}) scales the text appropriately. In
-Windows, scaleable TrueType fonts are always used; in X, results depend
+Windows, scalable TrueType fonts are always used; in X, results depend
on availability of fonts, but usually a reasonable match is found.
Note that the coordinate origin should ideally be selectable, but for
\func{void}{SetOptimization}{\param{bool }{optimize}}
-If {\it optimize} is TRUE (the default), this function sets optimization mode on.
+If {\it optimize} is true (the default), this function sets optimization mode on.
This currently means that under X, the device context will not try to set a pen or brush
property if it is known to be set already. This approach can fall down
if non-wxWindows code is using the same device context or window, for example
\section{\class{wxDCClipper}}\label{wxdcclipper}
This is a small helper class which sets the specified to its constructor
-clipping region and then automatically destroyes it in its destructor. Using
+clipping region and then automatically destroys it in its destructor. Using
it ensures that unwanted clipping region is not left set on the DC.
\wxheading{Derived from}
\func{}{\destruct{wxDCClipper}}{\void}
-Destructor: destroyes the clipping region set in the constructor.
+Destructor: destroys the clipping region set in the constructor.
projects / wxWidgets.git / blobdiff