// so there is little advantage to setting it to 1.
#define WXWIN_COMPATIBILITY 0
+// This setting determines the compatibility with 2.0 API: set it to 1 to
+// enable it
+//
+// Default is 0.
+//
+// Recommended setting: 0 (please update your code instead!)
+#define WXWIN_COMPATIBILITY_2 0
+
+// This setting determines the compatibility with 2.0 API: set it to 1 to
+// enable it
+//
+// Default is 0.
+//
+// Recommended setting: 0 (please update your code instead!)
+#define WXWIN_COMPATIBILITY_2_2 0
+
// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
// but this is very dangerous because you can mistakenly pass an icon instead
// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
// Recommended setting: 1 (always)
#define wxUSE_LOG 1
+// Support for command line parsing using wxCmdLineParser class.
+//
+// Default is 1
+//
+// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
+#define wxUSE_CMDLINE_PARSER 1
+
+// Recommended setting: 1
+#define wxUSE_LOGWINDOW 1
+
+// Recommended setting: 1
+#define wxUSE_LOGGUI 1
+
+// Recommended setting: 1
+#define wxUSE_LOG_DIALOG 1
+
// Support for multithreaded applications: if 1, compile in thread classes
// (thread.h) and make the library a bit more thread safe. Although thread
// support is quite stable by now, you may still consider recompiling the
// Recommended setting: 1
#define wxUSE_LONGLONG 1
-// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which
+// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
+// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
+//
+// Default is 1
+//
+// Recommended setting: 1 (wxFile is highly recommended as it is required by
+// i18n code, wxFileConfig and others)
+#define wxUSE_FILE 1
+#define wxUSE_FFILE 1
+
+// use wxTextFile class: requires wxFile, required by wxFileConfig
+#define wxUSE_TEXTFILE 1
+
+// i18n support: _() macro, wxLocale class. Requires wxTextFile.
+#define wxUSE_INTL 1
+
+// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
// allow to manipulate dates, times and time intervals. wxDateTime replaces the
// old wxTime and wxDate classes which are still provided for backwards
// compatibility (and implemented in terms of wxDateTime).
//
// Requires: wxUSE_LONGLONG
//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_DATETIME 1
+
+// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not
+// the same as wxDateTime!). These classes are obsolete and shouldn't be used
+// in new code
+//
+// Default is 0
+//
+// Recommended setting: 0 unless you have legacy code which uses these classes
+#define wxUSE_TIMEDATE 0
+
+// Set wxUSE_TIMER to 1 to compile wxTimer class
+//
+// Default is 1
+//
// Recommended setting: 1
-#define wxUSE_TIMEDATE 1
+#define wxUSE_TIMER 1
+
+// Use wxStopWatch clas.
+//
+// Default is 1
+//
+// Recommended setting: 1 (needed by wxSocket)
+#define wxUSE_STOPWATCH 1
// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
// which allow the application to store its settings in the persistent
// See also wxUSE_CONFIG_NATIVE below.
//
// Recommended setting: 1
-#define wxUSE_CONFIG 1
+#define wxUSE_CONFIG 1
// If wxUSE_CONFIG is 1, you may choose to use either the native config
// classes under Windows (using .INI files under Win16 and the registry under
// Recommended setting: 1 unless you don't like the license terms (unlikely)
#define wxUSE_APPLE_IEEE 1
-// Use wxFile class.
-//
-// Default is 1.
-//
-// Recommended setting: 1 (highly recommended, required i18n code, wxConfig...)
-#define wxUSE_FILE 1
+// Joystick support class
+#define wxUSE_JOYSTICK 1
-// use wxTextFile class: requires wxFile, required by wxFileConfig
-#define wxUSE_TEXTFILE 1
+// wxFontMapper class
+#define wxUSE_FONTMAP 1
-// i18n support: _() macro, wxLocale class. Requires wxTextFile.
-#define wxUSE_INTL 1
+// wxMimeTypesManager class
+#define wxUSE_MIMETYPE 1
-// Joystick support class
-#define wxUSE_JOYSTICK 1
+// wxSystemOptions class
+#define wxUSE_SYSTEM_OPTIONS 1
-// Miscellaneous geometry code: needed for Canvas library
-#define wxUSE_GEOMETRY 1
+// Support for regular expression matching via wxRegEx class: enable this to
+// use POSIX regular expressions in your code. You need to compile regex
+// library from src/regex to use it under Windows.
+//
+// Default is 0
+//
+// Recommended setting: 1 if your compiler supports it, if it doesn't please
+// contribute us a makefile for src/regex for it
+#define wxUSE_REGEX 0
-// Use menus
-#define wxUSE_MENUS 1
+// wxWave class
+#define wxUSE_WAVE 1
// ----------------------------------------------------------------------------
-// Optional controls
+// Individual GUI controls
// ----------------------------------------------------------------------------
+// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
+// (without it, wxControl class is not compiled)
+//
+// Default is 1
+//
+// Recommended setting: 1 (don't change except for very special programs)
+#define wxUSE_CONTROLS 1
+
+// wxPopupWindow class is not used currently by wxMSW
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_POPUPWIN 0
+
+// Each of the settings below corresponds to one wxWindows control. They are
+// all switched on by default but may be disabled if you are sure that your
+// program (including any standard dialogs it can show!) doesn't need them and
+// if you desperately want to save some space. If you use any of these you must
+// set wxUSE_CONTROLS as well.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_BUTTON 1 // wxButton
+#define wxUSE_BMPBUTTON 1 // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
+#define wxUSE_CHECKBOX 1 // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHOICE 1 // wxChoice
+#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_LISTBOX 1 // wxListBox
+#define wxUSE_LISTCTRL 1 // wxListCtrl
+#define wxUSE_RADIOBOX 1 // wxRadioBox
+#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_SCROLLBAR 1 // wxScrollBar
+#define wxUSE_SLIDER 1 // wxSlider
+#define wxUSE_SPINBTN 1 // wxSpinButton
+#define wxUSE_SPINCTRL 1 // wxSpinCtrl
+#define wxUSE_STATBOX 1 // wxStaticBox
+#define wxUSE_STATLINE 1 // wxStaticLine
+#define wxUSE_STATTEXT 1 // wxStaticText
+#define wxUSE_STATBMP 1 // wxStaticBitmap
+#define wxUSE_TEXTCTRL 1 // wxTextCtrl
+#define wxUSE_TOGGLEBTN 1 // requires wxButton
+#define wxUSE_TREECTRL 1 // wxTreeCtrl
+
+// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
+// below either wxStatusBar95 or a generic wxStatusBar will be used.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_STATUSBAR 1
+
+// Two status bar implementations are available under Win32: the generic one
+// or the wrapper around native control. For native look and feel the native
+// version should be used.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (there is no advantage in using the generic one)
+#define wxUSE_NATIVE_STATUSBAR 1
+
// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
// classes at all. Otherwise, use the native toolbar class unless
// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
#define wxUSE_TOOLBAR_NATIVE 1
#define wxUSE_TOOLBAR_SIMPLE 1
+// this setting is obsolete, value is ignored
+#define wxUSE_BUTTONBAR 1
+
// wxNotebook is a control with several "tabs" located on one of its sides. It
// may be used ot logically organise the data presented to the user instead of
// putting everything in one huge dialog. It replaces wxTabControl and related
// Recommended setting: 1
#define wxUSE_NOTEBOOK 1
-// The corresponding controls will be compiled in if wxUSE_<CONTROL> is set to
-// 1 and not compiled into the library otherwise.
-//
-// Default is 1 for everything.
-//
-// Recommended setting: 1 (library might fail to compile for some combinations
-// of disabled controls)
-#define wxUSE_CARET 1
-#define wxUSE_CHECKBOX 1
-#define wxUSE_CHECKLISTBOX 1 // requires wxUSE_OWNER_DRAWN
-#define wxUSE_CHOICE 1
-#define wxUSE_COMBOBOX 1
-#define wxUSE_GAUGE 1
-#define wxUSE_LISTBOX 1
-#define wxUSE_RADIOBOX 1
-#define wxUSE_RADIOBTN 1
-#define wxUSE_SASH 1 // wxSashWindow
-#define wxUSE_SCROLLBAR 1
-#define wxUSE_SLIDER 1
-#define wxUSE_SPINBTN 1
-#define wxUSE_SPINCTRL 1
-#define wxUSE_STATLINE 1
-#define wxUSE_STATUSBAR 1
-#define wxUSE_TOGGLEBTN 1 // requires wxButton
-#define wxUSE_TOOLTIPS 1 // wxToolTip and wxWindow::SetToolTip()
-
-// Two status bar implementations are available under Win32: the generic one
-// or the wrapper around native control. For native look and feel the native
-// version should be used.
+// wxTabDialog is a generic version of wxNotebook but it is incompatible with
+// the new class. It shouldn't be used in new code.
//
-// Default is 1.
+// Default is 0.
//
-// Recommended setting: 1
-#define wxUSE_NATIVE_STATUSBAR 1
-
-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR 1
+// Recommended setting: 0 (use wxNotebook)
+#define wxUSE_TAB_DIALOG 0
// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and
// the new, much imporved and enhanced version. The new version is backwards
#define wxUSE_GRID 1
#define wxUSE_NEW_GRID 1
-// wxValidator class and related methods
-#define wxUSE_VALIDATORS 1
+// ----------------------------------------------------------------------------
+// Miscellaneous GUI stuff
+// ----------------------------------------------------------------------------
// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
#define wxUSE_ACCEL 1
+// Use wxCaret: a class implementing a "cursor" in a text control (called caret
+// under Windows).
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can be safely set to 0, not used by the library)
+#define wxUSE_CARET 1
+
+// Miscellaneous geometry code: needed for Canvas library
+#define wxUSE_GEOMETRY 1
+
+// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
+// wxListCtrl.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (set it to 0 if you don't use any of the controls
+// enumerated above, then this class is mostly useless too)
+#define wxUSE_IMAGLIST 1
+
+// Use wxMenu, wxMenuBar, wxMenuItem.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can't be disabled under MSW)
+#define wxUSE_MENUS 1
+
+// Use wxSashWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SASH 1
+
+// Use wxSplitterWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SPLITTER 1
+
+// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLTIPS 1
+
+// wxValidator class and related methods
+#define wxUSE_VALIDATORS 1
+
+// wxDC cacheing implementation
+#define wxUSE_DC_CACHEING 1
+
// ----------------------------------------------------------------------------
// common dialogs
// ----------------------------------------------------------------------------
// Recommended setting: 1 (unless it really doesn't work)
#define wxUSE_COMMON_DIALOGS 1
-// text entry dialog and wxGetTextFromUser function
-#define wxUSE_TEXTDLG 1
-
-// progress dialog class for lengthy operations
-#define wxUSE_PROGRESSDLG 1
-
// wxBusyInfo displays window with message when app is busy. Works in same way
// as wxBusyCursor
#define wxUSE_BUSYINFO 1
+// Use single/multiple choice dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_CHOICEDLG 1
+
+// Use colour picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_COLOURDLG 1
+
// wxDirDlg class for getting a directory name from user
#define wxUSE_DIRDLG 1
+// TODO: setting to choose the generic or native one
+
+// Use file open/save dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in many places in the library itself)
+#define wxUSE_FILEDLG 1
+
+// Use font picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_FONTDLG 1
+
+// Use wxMessageDialog and wxMessageBox.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_MSGDLG 1
+
+// progress dialog class for lengthy operations
+#define wxUSE_PROGRESSDLG 1
+
// support for startup tips (wxShowTip &c)
#define wxUSE_STARTUP_TIPS 1
+// text entry dialog and wxGetTextFromUser function
+#define wxUSE_TEXTDLG 1
+
+// number entry dialog
+#define wxUSE_NUMBERDLG 1
+
+// wizards
+#define wxUSE_WIZARDDLG 1
+
// ----------------------------------------------------------------------------
// Metafiles support
// ----------------------------------------------------------------------------
// wxTreeLayout class
#define wxUSE_TREELAYOUT 1
+// ----------------------------------------------------------------------------
+// Data transfer
+// ----------------------------------------------------------------------------
+
+// Use wxClipboard class for clipboard copy/paste.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CLIPBOARD 1
+
+// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
+// drop
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DATAOBJ 1
+
+// Use wxDropTarget and wxDropSource classes for drag and drop (this is
+// different from "built in" drag and drop in wxTreeCtrl which is always
+// available). Requires wxUSE_DATAOBJ.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DRAG_AND_DROP 1
+
// ----------------------------------------------------------------------------
// miscellaneous settings
// ----------------------------------------------------------------------------
// space)
#define wxUSE_SNGLINST_CHECKER 1
+#define wxUSE_DRAGIMAGE 1
+
#define wxUSE_IPC 1
// 0 for no interprocess comms
#define wxUSE_HELP 1
// 0 for no help facility
#define wxUSE_MS_HTML_HELP 0
// 0 for no MS HTML Help
+
+// Use wxHTML-based help controller?
+#define wxUSE_WXHTML_HELP 1
+
#define wxUSE_RESOURCES 1
// 0 for no wxGetResource/wxWriteResource
#define wxUSE_CONSTRAINTS 1
// 0 for no window layout constraint system
-#define wxUSE_CLIPBOARD 1
- // 0 for no clipboard functions
-
#define wxUSE_SPLINES 1
// 0 for no splines
-#define wxUSE_DRAG_AND_DROP 1
- // 0 for no drag and drop
+#define wxUSE_XPM_IN_MSW 1
+ // 0 for no XPM support in wxBitmap.
+ // Default is 1, as XPM is now fully
+ // supported this makes easier the issue
+ // of portable icons and bitmaps.
#define wxUSE_IMAGE_LOADING_IN_MSW 1
// Use dynamic DIB loading/saving code in utils/dib under MSW.
// you need to modify setup.h and rebuild everything
// ----------------------------------------------------------------------------
-#if wxUSE_TIMEDATE && !wxUSE_LONGLONG
+#if wxUSE_DATETIME && !wxUSE_LONGLONG
#error wxDateTime requires wxLongLong
#endif
projects / wxWidgets.git / blobdiff