// Created: 01/02/97
// RCS-ID: $Id$
// Copyright: (c) Julian Smart
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
#ifndef _WX_SETUP_H_
// compatibility settings
// ----------------------------------------------------------------------------
-// This setting determines the compatibility with 1.68 API:
-// Level 0: no backward compatibility, all new features
-// Level 1: some extra methods are defined for compatibility.
+// This setting determines the compatibility with 2.4 API: set it to 1 to
+// enable it but please consider updating your code instead.
//
-// Default is 0.
-//
-// Recommended setting: 0 (in fact the compatibility code is now very minimal
-// so there is little advantage to setting it to 1.
-#define WXWIN_COMPATIBILITY 0
-
-// This setting determines the compatibility with 2.0 API: set it to 1 to
-// enable it
-//
-// Default is 0.
-//
-// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2 0
-
-// This setting determines the compatibility with 2.0 API: set it to 1 to
-// enable it
-//
-// Default is 1.
-//
-// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2_2 1
-
-// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
-// but this is very dangerous because you can mistakenly pass an icon instead
-// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
-// because an icon is not a valid bitmap
-//
-// Starting from 2.1.12, you have the choice under this backwards compatible
-// behaviour (your code will still compile, but probably won't behave as
-// expected!) and not deriving wxIcon class from wxBitmap, but providing a
-// conversion ctor wxBitmap(const wxIcon&) instead.
+// Default is 0
//
-// Recommended setting: 0
-#define wxICON_IS_BITMAP 0
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_4 0
-// Define as 1 for font size to be backward compatible to 1.63 and earlier.
-// 1.64 and later define point sizes to be compatible with Windows.
+// This setting determines the compatibility with 2.6 API: set it to 0 to
+// flag all cases of using deprecated functions.
//
-// Default is 0
+// Default is 1 but please try building your code with 0 as the default will
+// change to 0 in the next version and the deprecated functions will disappear
+// in the version after it completely.
//
-// Recommended setting: 0
-#define wxFONT_SIZE_COMPATIBILITY 0
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_6 1
// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
// If migrating between versions, your dialogs may seem to shrink.
// Generic comment about debugging settings: they are very useful if you don't
// use any other memory leak detection tools such as Purify/BoundsChecker, but
// are probably redundant otherwise. Also, Visual C++ CRT has the same features
-// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
// may prefer to use it instead of built in memory debugging code because it is
// faster and more fool proof.
//
// Unicode support
// ----------------------------------------------------------------------------
-// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
// defined as wchar_t, wxString will use Unicode internally. If you set this
// to 1, you must use wxT() macro for all literal strings in the program.
//
// Recommended setting: 0 (unless you only plan to use Windows NT/2000)
#define wxUSE_UNICODE 0
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This
// setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
// http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you
// Recommended setting: 0 unless you do plan to develop MT applications
#define wxUSE_THREADS 0
-// If enabled (1), compiles wxWindows streams classes
+// If enabled (1), compiles wxWidgets streams classes
#define wxUSE_STREAMS 1
// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
// Recommended setting: 1
#define wxUSE_DATETIME 1
-// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not
-// the same as wxDateTime!). These classes are obsolete and shouldn't be used
-// in new code
-//
-// Default is 0
-//
-// Recommended setting: 0 unless you have legacy code which uses these classes
-#define wxUSE_TIMEDATE 0
-
// Set wxUSE_TIMER to 1 to compile wxTimer class
//
// Default is 1
// If enabled, the code written by Apple will be used to write, in a portable
// way, float on the disk. See extended.c for the license which is different
-// from wxWindows one.
+// from wxWidgets one.
//
// Default is 1.
//
// contribute us a makefile for src/regex for it
#define wxUSE_REGEX 0
-// wxWave class
-#define wxUSE_WAVE 0
+// wxSound class
+#define wxUSE_SOUND 0
+
+// Use wxMediaCtrl
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_MEDIACTRL 1
+
+// Use QuickTime
+//
+// Default is 0
+//
+// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
+#define wxUSE_QUICKTIME 0
+
+// Use DirectShow
+//
+// Default is 0
+//
+// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
+#define wxUSE_DIRECTSHOW 1
+
+// Use wxWidget's XRC XML-based resource system. Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC 1
+
+// XML parsing classes. Note that their API will change in the future, so
+// using wxXmlDocument and wxXmlNode in your app is not recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (required by XRC)
+#if wxUSE_XRC
+# define wxUSE_XML 1
+#else
+# define wxUSE_XML 0
+#endif
// ----------------------------------------------------------------------------
// Individual GUI controls
// Recommended setting: 1 (may be set to 0)
#define wxUSE_TIPWINDOW 1
-// Each of the settings below corresponds to one wxWindows control. They are
+// Each of the settings below corresponds to one wxWidgets control. They are
// all switched on by default but may be disabled if you are sure that your
// program (including any standard dialogs it can show!) doesn't need them and
// if you desperately want to save some space. If you use any of these you must
// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
// classes at all. Otherwise, use the native toolbar class unless
-// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
-// supports some features which might not be supported by the native wxToolBar
-// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+// wxUSE_TOOLBAR_NATIVE is 0.
//
// Default is 1 for all settings.
//
-// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
-// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
#define wxUSE_TOOLBAR 0
#define wxUSE_TOOLBAR_NATIVE 0
-#define wxUSE_TOOLBAR_SIMPLE 0
-
-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR 0
// wxNotebook is a control with several "tabs" located on one of its sides. It
// may be used ot logically organise the data presented to the user instead of
// Recommended setting: 0 (use wxNotebook)
#define wxUSE_TAB_DIALOG 0
-// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and
-// the new, much imporved and enhanced version. The new version is backwards
-// compatible with the old one and should be used whenever possible, i.e. if
-// you set wxUSE_GRID to 1, set wxUSE_NEW_GRID to 1 too.
-//
-// Default is 1 for both options.
-//
-// Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using
-// wxGrid and 100% backwards compatibality (with all old wxGrid quirks) is
-// essential.
+// wxGrid class
+// Default is 1
//
-// WIN16/BC++ resets wxUSE_NEW_GRID to 0 because it exceeds the data limit.
#define wxUSE_GRID 0
-#define wxUSE_NEW_GRID 0
// wxProperty[Value/Form/List] classes, used by Dialog Editor
#define wxUSE_PROPSHEET 0
// common dialogs
// ----------------------------------------------------------------------------
-// Define 1 to use generic dialogs in Windows, even though they duplicate
-// native common dialog (e.g. wxColourDialog). This is mainly useful for
-// testing.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxUSE_GENERIC_DIALOGS_IN_MSW 0
-
// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
// file selector, printer dialog). Switching this off also switches off the
// printing architecture and interactive wxPrinterDC.
// Set to 1 to use font metric files in GetTextExtent
#define wxUSE_AFM_FOR_POSTSCRIPT 0
-// Set to 0 to disable PostScript print/preview architecture code under Windows
-// (just use Windows printing).
-#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
-
// ----------------------------------------------------------------------------
// database classes
// ----------------------------------------------------------------------------
#define wxODBC_FWD_ONLY_CURSORS 1
// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
-// member variables. With a setting of 1, full backward compatability with the
+// member variables. With a setting of 1, full backward compatibility with the
// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
// as future development will be done only on the non-deprecated
// functions/classes/member variables/etc.
// Windows-only settings
// ----------------------------------------------------------------------------
-// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
// will override some other settings (see below)
//
// Default is 0.
#define wxUSE_CTL3D 1
#endif
-// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
-// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
-// miniframes support instead.
-//
-// Default is 0 for (most) Win32 (systems), 1 for Win16
-//
-// Recommended setting: same as default
-#if defined(__WIN95__)
-#define wxUSE_ITSY_BITSY 0
-#else
-#define wxUSE_ITSY_BITSY 1
-#endif
+// Set to 0 to disable PostScript print/preview architecture code under Windows
+// (just use Windows printing).
+#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
// which allows to put more than ~32Kb of text in it even under Win9x (NT
//
// Recommended setting: 1, only set it to 0 if your compiler doesn't have
// or can't compile <richedit.h>
-#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__)
+#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
#define wxUSE_RICHEDIT 1
// TODO: This should be ifdef'ed for any compilers that don't support
// NB: all settings in this section are obsolete and should not be used/changed
// at all, they will disappear
-// Set to 1 to use PenWindows
-#define wxUSE_PENWINDOWS 0
-
// Define 1 to use bitmap messages.
#define wxUSE_BITMAP_MESSAGE 1
#define wxUSE_OWNER_DRAWN 0
#endif // __SALFORDC__
-#ifdef __TWIN32__
-
-#undef wxUSE_THREADS
-#define wxUSE_THREADS 0
-
-#undef wxUSE_ODBC
-#define wxUSE_ODBC 0
-
-#endif // __TWIN32__
-
// BC++/Win16 can't cope with the amount of data in resource.cpp
#if defined(__WIN16__) && defined(__BORLANDC__)
#undef wxUSE_WX_RESOURCES
projects / wxWidgets.git / blobdiff