dnl ---------------------------------------------------------------------------
-dnl Macros for wxWindows detection. Typically used in configure.in as:
+dnl Author: wxWidgets development team,
+dnl Francesco Montorsi,
+dnl Bob McCown (Mac-testing)
+dnl Creation date: 24/11/2001
+dnl RCS-ID: $Id$
+dnl ---------------------------------------------------------------------------
+
+dnl ===========================================================================
+dnl Table of Contents of this macro file:
+dnl -------------------------------------
+dnl
+dnl SECTION A: wxWidgets main macros
+dnl - WX_CONFIG_OPTIONS
+dnl - WX_CONFIG_CHECK
+dnl - WXRC_CHECK
+dnl - WX_STANDARD_OPTIONS
+dnl - WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
+dnl - WX_DETECT_STANDARD_OPTION_VALUES
+dnl
+dnl SECTION B: wxWidgets-related utilities
+dnl - WX_LIKE_LIBNAME
+dnl - WX_ARG_ENABLE_YESNOAUTO
+dnl - WX_ARG_WITH_YESNOAUTO
+dnl
+dnl SECTION C: messages to the user
+dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG
+dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
+dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_END
+dnl - WX_BOOLOPT_SUMMARY
+dnl
+dnl The special "WX_DEBUG_CONFIGURE" variable can be set to 1 to enable extra
+dnl debug output on stdout from these macros.
+dnl ===========================================================================
+
+
+dnl ---------------------------------------------------------------------------
+dnl Macros for wxWidgets detection. Typically used in configure.in as:
dnl
dnl AC_ARG_ENABLE(...)
dnl AC_ARG_WITH(...)
dnl ...
-dnl AM_OPTIONS_WXCONFIG
+dnl WX_CONFIG_OPTIONS
dnl ...
dnl ...
-dnl AM_PATH_WXCONFIG(2.3.4, wxWin=1)
+dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1])
dnl if test "$wxWin" != 1; then
dnl AC_MSG_ERROR([
-dnl wxWindows must be installed on your system
+dnl wxWidgets must be installed on your system
dnl but wx-config script couldn't be found.
dnl
dnl Please check that wx-config is in path, the directory
-dnl where wxWindows libraries are installed (returned by
+dnl where wxWidgets libraries are installed (returned by
dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
-dnl equivalent variable and wxWindows version is 2.3.4 or above.
+dnl equivalent variable and wxWidgets version is 2.3.4 or above.
dnl ])
dnl fi
dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
dnl
-dnl LDFLAGS="$LDFLAGS $WX_LIBS"
+dnl LIBS="$LIBS $WX_LIBS"
+dnl
+dnl If you want to support standard --enable-debug/unicode/shared options, you
+dnl may do the following:
+dnl
+dnl ...
+dnl AC_CANONICAL_SYSTEM
+dnl
+dnl # define configure options
+dnl WX_CONFIG_OPTIONS
+dnl WX_STANDARD_OPTIONS([debug,unicode,shared,toolkit,wxshared])
+dnl
+dnl # basic configure checks
+dnl ...
+dnl
+dnl # we want to always have DEBUG==WX_DEBUG and UNICODE==WX_UNICODE
+dnl WX_DEBUG=$DEBUG
+dnl WX_UNICODE=$UNICODE
+dnl
+dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
+dnl WX_CONFIG_CHECK([2.8.0], [wxWin=1],,[html,core,net,base],[$WXCONFIG_FLAGS])
+dnl WX_DETECT_STANDARD_OPTION_VALUES
+dnl
+dnl # write the output files
+dnl AC_CONFIG_FILES([Makefile ...])
+dnl AC_OUTPUT
+dnl
+dnl # optional: just to show a message to the user
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
+dnl
dnl ---------------------------------------------------------------------------
+
dnl ---------------------------------------------------------------------------
-dnl AM_OPTIONS_WXCONFIG
+dnl WX_CONFIG_OPTIONS
dnl
dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and
dnl --wx-config command line options
dnl ---------------------------------------------------------------------------
-AC_DEFUN([AM_OPTIONS_WXCONFIG],
+AC_DEFUN([WX_CONFIG_OPTIONS],
[
AC_ARG_WITH(wxdir,
- [ --with-wxdir=PATH Use uninstalled version of wxWindows in PATH],
+ [ --with-wxdir=PATH Use uninstalled version of wxWidgets in PATH],
[ wx_config_name="$withval/wx-config"
wx_config_args="--inplace"])
AC_ARG_WITH(wx-config,
[ --with-wx-config=CONFIG wx-config script to use (optional)],
wx_config_name="$withval" )
AC_ARG_WITH(wx-prefix,
- [ --with-wx-prefix=PREFIX Prefix where wxWindows is installed (optional)],
+ [ --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)],
wx_config_prefix="$withval", wx_config_prefix="")
AC_ARG_WITH(wx-exec-prefix,
[ --with-wx-exec-prefix=PREFIX
- Exec prefix where wxWindows is installed (optional)],
+ Exec prefix where wxWidgets is installed (optional)],
wx_config_exec_prefix="$withval", wx_config_exec_prefix="")
])
+dnl Helper macro for checking if wx version is at least $1.$2.$3, set's
+dnl wx_ver_ok=yes if it is:
+AC_DEFUN([_WX_PRIVATE_CHECK_VERSION],
+[
+ wx_ver_ok=""
+ if test "x$WX_VERSION" != x ; then
+ if test $wx_config_major_version -gt $1; then
+ wx_ver_ok=yes
+ else
+ if test $wx_config_major_version -eq $1; then
+ if test $wx_config_minor_version -gt $2; then
+ wx_ver_ok=yes
+ else
+ if test $wx_config_minor_version -eq $2; then
+ if test $wx_config_micro_version -ge $3; then
+ wx_ver_ok=yes
+ fi
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
dnl ---------------------------------------------------------------------------
-dnl AM_PATH_WXCONFIG(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
+dnl WX_CONFIG_CHECK(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
dnl [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS]]]])
dnl
-dnl Test for wxWindows, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
-dnl (the latter is for static linking against wxWindows). Set WX_CONFIG_NAME
+dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
+dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME
dnl environment variable to override the default name of the wx-config script
dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this
dnl case the macro won't even waste time on tests for its existence.
dnl
dnl Optional WX-LIBS argument contains comma- or space-separated list of
-dnl wxWindows libraries to link against (it may include contrib libraries). If
-dnl it is not specified then WX_LIBS and WX_LIBS_STATIC will contain flags to
-dnl link with all of the core wxWindows libraries.
+dnl wxWidgets libraries to link against. If it is not specified then WX_LIBS
+dnl and WX_LIBS_STATIC will contain flags to link with all of the core
+dnl wxWidgets libraries.
dnl
dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config
dnl invocation command in present. It can be used to fine-tune lookup of
dnl best wxWidgets build available.
dnl
dnl Example use:
-dnl AM_PATH_WXCONFIG([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
+dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
dnl [--unicode --debug])
dnl ---------------------------------------------------------------------------
dnl
dnl Get the cflags and libraries from the wx-config script
dnl
-AC_DEFUN([AM_PATH_WXCONFIG],
+AC_DEFUN([WX_CONFIG_CHECK],
[
dnl do we have wx-config name: it can be wx-config or wxd-config or ...
if test x${WX_CONFIG_NAME+set} != xset ; then
if test "$WX_CONFIG_PATH" != "no" ; then
WX_VERSION=""
- no_wx=""
min_wx_version=ifelse([$1], ,2.2.1,$1)
if test -z "$5" ; then
- AC_MSG_CHECKING([for wxWindows version >= $min_wx_version])
+ AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version])
else
- AC_MSG_CHECKING([for wxWindows version >= $min_wx_version ($5)])
+ AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)])
fi
- WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5 $4"
+ dnl don't add the libraries ($4) to this variable as this would result in
+ dnl an error when it's used with --version below
+ WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5"
WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null`
wx_config_major_version=`echo $WX_VERSION | \
wx_requested_micro_version=`echo $min_wx_version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- wx_ver_ok=""
- if test "x$WX_VERSION" != x ; then
- if test $wx_config_major_version -gt $wx_requested_major_version; then
- wx_ver_ok=yes
+ _WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version],
+ [$wx_requested_minor_version],
+ [$wx_requested_micro_version])
+
+ if test -n "$wx_ver_ok"; then
+ AC_MSG_RESULT(yes (version $WX_VERSION))
+ WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs $4`
+
+ dnl is this even still appropriate? --static is a real option now
+ dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is
+ dnl what the user actually wants, making this redundant at best.
+ dnl For now keep it in case anyone actually used it in the past.
+ AC_MSG_CHECKING([for wxWidgets static library])
+ WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs $4 2>/dev/null`
+ if test "x$WX_LIBS_STATIC" = "x"; then
+ AC_MSG_RESULT(no)
else
- if test $wx_config_major_version -eq $wx_requested_major_version; then
- if test $wx_config_minor_version -gt $wx_requested_minor_version; then
- wx_ver_ok=yes
- else
- if test $wx_config_minor_version -eq $wx_requested_minor_version; then
- if test $wx_config_micro_version -ge $wx_requested_micro_version; then
- wx_ver_ok=yes
- fi
- fi
- fi
- fi
+ AC_MSG_RESULT(yes)
fi
- fi
-
- if test "x$wx_ver_ok" = x ; then
- no_wx=yes
- else
- WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs`
- WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs`
dnl starting with version 2.2.6 wx-config has --cppflags argument
wx_has_cppflags=""
fi
fi
+ dnl starting with version 2.7.0 wx-config has --rescomp option
+ wx_has_rescomp=""
+ if test $wx_config_major_version -gt 2; then
+ wx_has_rescomp=yes
+ else
+ if test $wx_config_major_version -eq 2; then
+ if test $wx_config_minor_version -ge 7; then
+ wx_has_rescomp=yes
+ fi
+ fi
+ fi
+ if test "x$wx_has_rescomp" = x ; then
+ dnl cannot give any useful info for resource compiler
+ WX_RESCOMP=
+ else
+ WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp`
+ fi
+
if test "x$wx_has_cppflags" = x ; then
dnl no choice but to define all flags like CFLAGS
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
+ WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
WX_CPPFLAGS=$WX_CFLAGS
WX_CXXFLAGS=$WX_CFLAGS
WX_CXXFLAGS_ONLY=$WX_CFLAGS
else
dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS
- WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags`
- WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags`
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
+ WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags $4`
+ WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags $4`
+ WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"`
WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"`
fi
- fi
- if test "x$no_wx" = x ; then
- AC_MSG_RESULT(yes (version $WX_VERSION))
- ifelse([$2], , :, [$2])
+ ifelse([$2], , :, [$2])
+
else
+
if test "x$WX_VERSION" = x; then
dnl no wx-config at all
AC_MSG_RESULT(no)
WX_CXXFLAGS=""
WX_LIBS=""
WX_LIBS_STATIC=""
- ifelse([$3], , :, [$3])
+ WX_RESCOMP=""
+
+ if test ! -z "$5"; then
+
+ wx_error_message="
+ The configuration you asked for $PACKAGE_NAME requires a wxWidgets
+ build with the following settings:
+ $5
+ but such build is not available.
+
+ To see the wxWidgets builds available on this system, please use
+ 'wx-config --list' command. To use the default build, returned by
+ 'wx-config --selected-config', use the options with their 'auto'
+ default values."
+
+ fi
+
+ wx_error_message="
+ The requested wxWidgets build couldn't be found.
+ $wx_error_message
+
+ If you still get this error, then check that 'wx-config' is
+ in path, the directory where wxWidgets libraries are installed
+ (returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH
+ or equivalent variable and wxWidgets version is $1 or above."
+
+ ifelse([$3], , AC_MSG_ERROR([$wx_error_message]), [$3])
+
fi
+ else
+
+ WX_CFLAGS=""
+ WX_CPPFLAGS=""
+ WX_CXXFLAGS=""
+ WX_LIBS=""
+ WX_LIBS_STATIC=""
+ WX_RESCOMP=""
+
+ ifelse([$3], , :, [$3])
+
fi
AC_SUBST(WX_CPPFLAGS)
AC_SUBST(WX_LIBS)
AC_SUBST(WX_LIBS_STATIC)
AC_SUBST(WX_VERSION)
+ AC_SUBST(WX_RESCOMP)
+
+ dnl need to export also WX_VERSION_MINOR and WX_VERSION_MAJOR symbols
+ dnl to support wxpresets bakefiles (we export also WX_VERSION_MICRO for completeness):
+ WX_VERSION_MAJOR="$wx_config_major_version"
+ WX_VERSION_MINOR="$wx_config_minor_version"
+ WX_VERSION_MICRO="$wx_config_micro_version"
+ AC_SUBST(WX_VERSION_MAJOR)
+ AC_SUBST(WX_VERSION_MINOR)
+ AC_SUBST(WX_VERSION_MICRO)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl Get information on the wxrc program for making C++, Python and xrs
+dnl resource files.
+dnl
+dnl AC_ARG_ENABLE(...)
+dnl AC_ARG_WITH(...)
+dnl ...
+dnl WX_CONFIG_OPTIONS
+dnl ...
+dnl WX_CONFIG_CHECK(2.6.0, wxWin=1)
+dnl if test "$wxWin" != 1; then
+dnl AC_MSG_ERROR([
+dnl wxWidgets must be installed on your system
+dnl but wx-config script couldn't be found.
+dnl
+dnl Please check that wx-config is in path, the directory
+dnl where wxWidgets libraries are installed (returned by
+dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
+dnl equivalent variable and wxWidgets version is 2.6.0 or above.
+dnl ])
+dnl fi
+dnl
+dnl WXRC_CHECK([HAVE_WXRC=1], [HAVE_WXRC=0])
+dnl if test "x$HAVE_WXRC" != x1; then
+dnl AC_MSG_ERROR([
+dnl The wxrc program was not installed or not found.
+dnl
+dnl Please check the wxWidgets installation.
+dnl ])
+dnl fi
+dnl
+dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
+dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
+dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
+dnl
+dnl LDFLAGS="$LDFLAGS $WX_LIBS"
+dnl ---------------------------------------------------------------------------
+
+dnl ---------------------------------------------------------------------------
+dnl WXRC_CHECK([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl
+dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS
+dnl resources. The variable WXRC will be set and substituted in the configure
+dnl script and Makefiles.
+dnl
+dnl Example use:
+dnl WXRC_CHECK([wxrc=1], [wxrc=0])
+dnl ---------------------------------------------------------------------------
+
+dnl
+dnl wxrc program from the wx-config script
+dnl
+AC_DEFUN([WXRC_CHECK],
+[
+ AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler])
+
+ if test "x$WX_CONFIG_NAME" = x; then
+ AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.])
+ else
+
+ AC_MSG_CHECKING([for wxrc])
+
+ if test "x$WXRC" = x ; then
+ dnl wx-config --utility is a new addition to wxWidgets:
+ _WX_PRIVATE_CHECK_VERSION(2,5,3)
+ if test -n "$wx_ver_ok"; then
+ WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc`
+ fi
+ fi
+
+ if test "x$WXRC" = x ; then
+ AC_MSG_RESULT([not found])
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT([$WXRC])
+ ifelse([$1], , :, [$1])
+ fi
+
+ AC_SUBST(WXRC)
+ fi
])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_LIKE_LIBNAME([output-var] [prefix], [name])
+dnl
+dnl Sets the "output-var" variable to the name of a library named with same
+dnl wxWidgets rule.
+dnl E.g. for output-var=='lib', name=='test', prefix='mine', sets
+dnl the $lib variable to:
+dnl 'mine_gtk2ud_test-2.8'
+dnl if WX_PORT=gtk2, WX_UNICODE=1, WX_DEBUG=1 and WX_RELEASE=28
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_LIKE_LIBNAME],
+ [
+ wx_temp="$2""_""$WX_PORT"
+
+ dnl add the [u][d] string
+ if test "$WX_UNICODE" = "1"; then
+ wx_temp="$wx_temp""u"
+ fi
+ if test "$WX_DEBUG" = "1"; then
+ wx_temp="$wx_temp""d"
+ fi
+
+ dnl complete the name of the lib
+ wx_temp="$wx_temp""_""$3""-$WX_VERSION_MAJOR.$WX_VERSION_MINOR"
+
+ dnl save it in the user's variable
+ $1=$wx_temp
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_ARG_ENABLE_YESNOAUTO/WX_ARG_WITH_YESNOAUTO
+dnl
+dnl Two little custom macros which define the ENABLE/WITH configure arguments.
+dnl Macro arguments:
+dnl $1 = the name of the --enable / --with feature
+dnl $2 = the name of the variable associated
+dnl $3 = the description of that feature
+dnl $4 = the default value for that feature
+dnl $5 = additional action to do in case option is given with "yes" value
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_ARG_ENABLE_YESNOAUTO],
+ [AC_ARG_ENABLE($1,
+ AC_HELP_STRING([--enable-$1], [$3 (default is $4)]),
+ [], [enableval="$4"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --enable-$1 option])
+ if test "$enableval" = "yes" ; then
+ AC_MSG_RESULT([yes])
+ $2=1
+ $5
+ elif test "$enableval" = "no" ; then
+ AC_MSG_RESULT([no])
+ $2=0
+ elif test "$enableval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ $2="auto"
+ else
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: yes, no, auto)
+ ])
+ fi
+ ])
+
+AC_DEFUN([WX_ARG_WITH_YESNOAUTO],
+ [AC_ARG_WITH($1,
+ AC_HELP_STRING([--with-$1], [$3 (default is $4)]),
+ [], [withval="$4"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --with-$1 option])
+ if test "$withval" = "yes" ; then
+ AC_MSG_RESULT([yes])
+ $2=1
+ $5
+ dnl NB: by default we don't allow --with-$1=no option
+ dnl since it does not make much sense !
+ elif test "$6" = "1" -a "$withval" = "no" ; then
+ AC_MSG_RESULT([no])
+ $2=0
+ elif test "$withval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ $2="auto"
+ else
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: yes, auto)
+ ])
+ fi
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl WX_STANDARD_OPTIONS([options-to-add])
+dnl
+dnl Adds to the configure script one or more of the following options:
+dnl --enable-[debug|unicode|shared|wxshared|wxdebug]
+dnl --with-[gtk|msw|motif|x11|mac|mgl|dfb]
+dnl --with-wxversion
+dnl Then checks for their presence and eventually set the DEBUG, UNICODE, SHARED,
+dnl PORT, WX_SHARED, WX_DEBUG, variables to one of the "yes", "no", "auto" values.
+dnl
+dnl Note that e.g. UNICODE != WX_UNICODE; the first is the value of the
+dnl --enable-unicode option (in boolean format) while the second indicates
+dnl if wxWidgets was built in Unicode mode (and still is in boolean format).
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_STANDARD_OPTIONS],
+ [
+
+ dnl the following lines will expand to WX_ARG_ENABLE_YESNOAUTO calls if and only if
+ dnl the $1 argument contains respectively the debug,unicode or shared options.
+
+ dnl be careful here not to set debug flag if only "wxdebug" was specified
+ ifelse(regexp([$1], [\bdebug]), [-1],,
+ [WX_ARG_ENABLE_YESNOAUTO([debug], [DEBUG], [Build in debug mode], [auto])])
+
+ ifelse(index([$1], [unicode]), [-1],,
+ [WX_ARG_ENABLE_YESNOAUTO([unicode], [UNICODE], [Build in Unicode mode], [auto])])
+
+ ifelse(regexp([$1], [\bshared]), [-1],,
+ [WX_ARG_ENABLE_YESNOAUTO([shared], [SHARED], [Build as shared library], [auto])])
+
+ dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-toolkit since it's an option
+ dnl which must be able to accept the auto|gtk1|gtk2|msw|... values
+ ifelse(index([$1], [toolkit]), [-1],,
+ [
+ AC_ARG_WITH([toolkit],
+ AC_HELP_STRING([--with-toolkit],
+ [Build against a specific wxWidgets toolkit (default is auto)]),
+ [], [withval="auto"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --with-toolkit option])
+ if test "$withval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ TOOLKIT="auto"
+ else
+ TOOLKIT="$withval"
+
+ dnl PORT must be one of the allowed values
+ if test "$TOOLKIT" != "gtk1" -a "$TOOLKIT" != "gtk2" -a \
+ "$TOOLKIT" != "msw" -a "$TOOLKIT" != "motif" -a \
+ "$TOOLKIT" != "x11" -a "$TOOLKIT" != "mac" -a \
+ "$TOOLKIT" != "mgl" -a "$TOOLKIT" != "dfb" ; then
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: auto, gtk1, gtk2, msw, motif, x11, mac, mgl, dfb)
+ ])
+ fi
+
+ AC_MSG_RESULT([$TOOLKIT])
+ fi
+ ])
+
+ dnl ****** IMPORTANT *******
+ dnl Unlike for the UNICODE setting, you can build your program in
+ dnl shared mode against a static build of wxWidgets. Thus we have the
+ dnl following option which allows these mixtures. E.g.
+ dnl
+ dnl ./configure --disable-shared --with-wxshared
+ dnl
+ dnl will build your library in static mode against the first available
+ dnl shared build of wxWidgets.
+ dnl
+ dnl Note that's not possible to do the viceversa:
+ dnl
+ dnl ./configure --enable-shared --without-wxshared
+ dnl
+ dnl Doing so you would try to build your library in shared mode against a static
+ dnl build of wxWidgets. This is not possible (you would mix PIC and non PIC code) !
+ dnl A check for this combination of options is in WX_DETECT_STANDARD_OPTION_VALUES
+ dnl (where we know what 'auto' should be expanded to).
+ dnl
+ dnl If you try to build something in ANSI mode against a UNICODE build
+ dnl of wxWidgets or in RELEASE mode against a DEBUG build of wxWidgets,
+ dnl then at best you'll get ton of linking errors !
+ dnl ************************
+
+ ifelse(index([$1], [wxshared]), [-1],,
+ [
+ WX_ARG_WITH_YESNOAUTO(
+ [wxshared], [WX_SHARED],
+ [Force building against a shared build of wxWidgets, even if --disable-shared is given],
+ [auto], [], [1])
+ ])
+
+ dnl Just like for SHARED and WX_SHARED it may happen that some adventurous
+ dnl peoples will want to mix a wxWidgets release build with a debug build of
+ dnl his app/lib. So, we have both DEBUG and WX_DEBUG variables.
+ ifelse(index([$1], [wxdebug]), [-1],,
+ [
+ WX_ARG_WITH_YESNOAUTO(
+ [wxdebug], [WX_DEBUG],
+ [Force building against a debug build of wxWidgets, even if --disable-debug is given],
+ [auto], [], [1])
+ ])
+
+ dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-wxversion since it's an option
+ dnl which accepts the "auto|2.6|2.7|2.8|2.9|3.0" etc etc values
+ ifelse(index([$1], [wxversion]), [-1],,
+ [
+ AC_ARG_WITH([wxversion],
+ AC_HELP_STRING([--with-wxversion],
+ [Build against a specific version of wxWidgets (default is auto)]),
+ [], [withval="auto"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --with-wxversion option])
+ if test "$withval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ WX_RELEASE="auto"
+ else
+
+ wx_requested_major_version=`echo $withval | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
+ wx_requested_minor_version=`echo $withval | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
+
+ dnl both vars above must be exactly 1 digit
+ if test "${#wx_requested_major_version}" != "1" -o \
+ "${#wx_requested_minor_version}" != "1" ; then
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: auto, 2.6, 2.7, 2.8, 2.9, 3.0)
+ ])
+ fi
+
+ WX_RELEASE="$wx_requested_major_version"".""$wx_requested_minor_version"
+ AC_MSG_RESULT([$WX_RELEASE])
+ fi
+ ])
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] DEBUG: $DEBUG, WX_DEBUG: $WX_DEBUG"
+ echo "[[dbg]] UNICODE: $UNICODE, WX_UNICODE: $WX_UNICODE"
+ echo "[[dbg]] SHARED: $SHARED, WX_SHARED: $WX_SHARED"
+ echo "[[dbg]] TOOLKIT: $TOOLKIT, WX_TOOLKIT: $WX_TOOLKIT"
+ echo "[[dbg]] VERSION: $VERSION, WX_RELEASE: $WX_RELEASE"
+ fi
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
+dnl
+dnl Sets the WXCONFIG_FLAGS string using the SHARED,DEBUG,UNICODE variable values
+dnl which are different from "auto".
+dnl Thus this macro needs to be called only once all options have been set.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS],
+ [
+ if test "$WX_SHARED" = "1" ; then
+ WXCONFIG_FLAGS="--static=no "
+ elif test "$WX_SHARED" = "0" ; then
+ WXCONFIG_FLAGS="--static=yes "
+ fi
+
+ if test "$WX_DEBUG" = "1" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=yes "
+ elif test "$WX_DEBUG" = "0" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=no "
+ fi
+
+ dnl The user should have set WX_UNICODE=UNICODE
+ if test "$WX_UNICODE" = "1" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=yes "
+ elif test "$WX_UNICODE" = "0" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=no "
+ fi
+
+ if test "$TOOLKIT" != "auto" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--toolkit=$TOOLKIT "
+ fi
+
+ if test "$WX_RELEASE" != "auto" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--version=$WX_RELEASE "
+ fi
+
+ dnl strip out the last space of the string
+ WXCONFIG_FLAGS=${WXCONFIG_FLAGS% }
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] WXCONFIG_FLAGS: $WXCONFIG_FLAGS"
+ fi
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl _WX_SELECTEDCONFIG_CHECKFOR([RESULTVAR], [STRING], [MSG]
+dnl [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl
+dnl Outputs the given MSG. Then searches the given STRING in the wxWidgets
+dnl additional CPP flags and put the result of the search in WX_$RESULTVAR
+dnl also adding the "yes" or "no" message result to MSG.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([_WX_SELECTEDCONFIG_CHECKFOR],
+ [
+ if test "$$1" = "auto" ; then
+
+ dnl The user does not have particular preferences for this option;
+ dnl so we will detect the wxWidgets relative build setting and use it
+ AC_MSG_CHECKING([$3])
+
+ dnl set WX_$1 variable to 1 if the $WX_SELECTEDCONFIG contains the $2
+ dnl string or to 0 otherwise.
+ dnl NOTE: 'expr match STRING REGEXP' cannot be used since on Mac it
+ dnl doesn't work; we use 'expr STRING : REGEXP' instead
+ WX_$1=$(expr "$WX_SELECTEDCONFIG" : ".*$2.*")
+
+ if test "$WX_$1" != "0"; then
+ WX_$1=1
+ AC_MSG_RESULT([yes])
+ ifelse([$4], , :, [$4])
+ else
+ WX_$1=0
+ AC_MSG_RESULT([no])
+ ifelse([$5], , :, [$5])
+ fi
+ else
+
+ dnl Use the setting given by the user
+ WX_$1=$$1
+ fi
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_DETECT_STANDARD_OPTION_VALUES
+dnl
+dnl Detects the values of the following variables:
+dnl 1) WX_RELEASE
+dnl 2) WX_UNICODE
+dnl 3) WX_DEBUG
+dnl 4) WX_SHARED (and also WX_STATIC)
+dnl 5) WX_PORT
+dnl from the previously selected wxWidgets build; this macro in fact must be
+dnl called *after* calling the WX_CONFIG_CHECK macro.
+dnl
+dnl Note that the WX_VERSION_MAJOR, WX_VERSION_MINOR symbols are already set
+dnl by WX_CONFIG_CHECK macro
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_DETECT_STANDARD_OPTION_VALUES],
+ [
+ dnl IMPORTANT: WX_VERSION contains all three major.minor.micro digits,
+ dnl while WX_RELEASE only the major.minor ones.
+ WX_RELEASE="$WX_VERSION_MAJOR""$WX_VERSION_MINOR"
+ if test $WX_RELEASE -lt 26 ; then
+
+ AC_MSG_ERROR([
+ Cannot detect the wxWidgets configuration for the selected wxWidgets build
+ since its version is $WX_VERSION < 2.6.0; please install a newer
+ version of wxWidgets.
+ ])
+ fi
+
+ dnl The wx-config we are using understands the "--selected_config"
+ dnl option which returns an easy-parseable string !
+ WX_SELECTEDCONFIG=$($WX_CONFIG_WITH_ARGS --selected_config)
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] Using wx-config --selected-config"
+ echo "[[dbg]] WX_SELECTEDCONFIG: $WX_SELECTEDCONFIG"
+ fi
+
+
+ dnl we could test directly for WX_SHARED with a line like:
+ dnl _WX_SELECTEDCONFIG_CHECKFOR([SHARED], [shared],
+ dnl [if wxWidgets was built in SHARED mode])
+ dnl but wx-config --selected-config DOES NOT outputs the 'shared'
+ dnl word when wx was built in shared mode; it rather outputs the
+ dnl 'static' word when built in static mode.
+ if test $WX_SHARED = "1"; then
+ STATIC=0
+ elif test $WX_SHARED = "0"; then
+ STATIC=1
+ elif test $WX_SHARED = "auto"; then
+ STATIC="auto"
+ fi
+
+ dnl Now set the WX_UNICODE, WX_DEBUG, WX_STATIC variables
+ _WX_SELECTEDCONFIG_CHECKFOR([UNICODE], [unicode],
+ [if wxWidgets was built with UNICODE enabled])
+ _WX_SELECTEDCONFIG_CHECKFOR([DEBUG], [debug],
+ [if wxWidgets was built in DEBUG mode])
+ _WX_SELECTEDCONFIG_CHECKFOR([STATIC], [static],
+ [if wxWidgets was built in STATIC mode])
+
+ dnl init WX_SHARED from WX_STATIC
+ if test "$WX_STATIC" != "0"; then
+ WX_SHARED=0
+ else
+ WX_SHARED=1
+ fi
+
+ AC_SUBST(WX_UNICODE)
+ AC_SUBST(WX_DEBUG)
+ AC_SUBST(WX_SHARED)
+
+ dnl detect the WX_PORT to use
+ if test "$TOOLKIT" = "auto" ; then
+
+ dnl The user does not have particular preferences for this option;
+ dnl so we will detect the wxWidgets relative build setting and use it
+ AC_MSG_CHECKING([which wxWidgets toolkit was selected])
+
+ WX_GTKPORT1=$(expr "$WX_SELECTEDCONFIG" : ".*gtk1.*")
+ WX_GTKPORT2=$(expr "$WX_SELECTEDCONFIG" : ".*gtk2.*")
+ WX_MSWPORT=$(expr "$WX_SELECTEDCONFIG" : ".*msw.*")
+ WX_MOTIFPORT=$(expr "$WX_SELECTEDCONFIG" : ".*motif.*")
+ WX_MACPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mac.*")
+ WX_X11PORT=$(expr "$WX_SELECTEDCONFIG" : ".*x11.*")
+ WX_MGLPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mgl.*")
+ WX_DFBPORT=$(expr "$WX_SELECTEDCONFIG" : ".*dfb.*")
+
+ WX_PORT="unknown"
+ if test "$WX_GTKPORT1" != "0"; then WX_PORT="gtk1"; fi
+ if test "$WX_GTKPORT2" != "0"; then WX_PORT="gtk2"; fi
+ if test "$WX_MSWPORT" != "0"; then WX_PORT="msw"; fi
+ if test "$WX_MOTIFPORT" != "0"; then WX_PORT="motif"; fi
+ if test "$WX_MACPORT" != "0"; then WX_PORT="mac"; fi
+ if test "$WX_X11PORT" != "0"; then WX_PORT="x11"; fi
+ if test "$WX_MGLPORT" != "0"; then WX_PORT="mgl"; fi
+ if test "$WX_DFBPORT" != "0"; then WX_PORT="dfb"; fi
+
+ dnl check at least one of the WX_*PORT has been set !
+
+ if test "$WX_PORT" = "unknown" ; then
+ AC_MSG_ERROR([
+ Cannot detect the currently installed wxWidgets port !
+ Please check your 'wx-config --cxxflags'...
+ ])
+ fi
+
+ AC_MSG_RESULT([$WX_PORT])
+ else
+
+ dnl Use the setting given by the user
+ if test -z "$TOOLKIT" ; then
+ WX_PORT=$TOOLKIT
+ else
+ dnl try with PORT
+ WX_PORT=$PORT
+ fi
+ fi
+
+ AC_SUBST(WX_PORT)
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] Values of all WX_* options after final detection:"
+ echo "[[dbg]] WX_DEBUG: $WX_DEBUG"
+ echo "[[dbg]] WX_UNICODE: $WX_UNICODE"
+ echo "[[dbg]] WX_SHARED: $WX_SHARED"
+ echo "[[dbg]] WX_RELEASE: $WX_RELEASE"
+ echo "[[dbg]] WX_PORT: $WX_PORT"
+ fi
+
+ dnl Avoid problem described in the WX_STANDARD_OPTIONS which happens when
+ dnl the user gives the options:
+ dnl ./configure --enable-shared --without-wxshared
+ dnl or just do
+ dnl ./configure --enable-shared
+ dnl but there is only a static build of wxWidgets available.
+ if test "$WX_SHARED" = "0" -a "$SHARED" = "1"; then
+ AC_MSG_ERROR([
+ Cannot build shared library against a static build of wxWidgets !
+ This error happens because the wxWidgets build which was selected
+ has been detected as static while you asked to build $PACKAGE_NAME
+ as shared library and this is not possible.
+ Use the '--disable-shared' option to build $PACKAGE_NAME
+ as static library or '--with-wxshared' to use wxWidgets as shared library.
+ ])
+ fi
+
+ dnl now we can finally update the DEBUG,UNICODE,SHARED options
+ dnl to their final values if they were set to 'auto'
+ if test "$DEBUG" = "auto"; then
+ DEBUG=$WX_DEBUG
+ fi
+ if test "$UNICODE" = "auto"; then
+ UNICODE=$WX_UNICODE
+ fi
+ if test "$SHARED" = "auto"; then
+ SHARED=$WX_SHARED
+ fi
+ if test "$TOOLKIT" = "auto"; then
+ TOOLKIT=$WX_PORT
+ fi
+
+ dnl in case the user needs a BUILD=debug/release var...
+ if test "$DEBUG" = "1"; then
+ BUILD="debug"
+ elif test "$DEBUG" = "0" -o "$DEBUG" = ""; then
+ BUILD="release"
+ fi
+
+ dnl respect the DEBUG variable adding the optimize/debug flags
+ dnl NOTE: the CXXFLAGS are merged together with the CPPFLAGS so we
+ dnl don't need to set them, too
+ if test "$DEBUG" = "1"; then
+ CXXFLAGS="$CXXFLAGS -g -O0"
+ CFLAGS="$CFLAGS -g -O0"
+ else
+ CXXFLAGS="$CXXFLAGS -O2"
+ CFLAGS="$CFLAGS -O2"
+ fi
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_BOOLOPT_SUMMARY([name of the boolean variable to show summary for],
+dnl [what to print when var is 1],
+dnl [what to print when var is 0])
+dnl
+dnl Prints $2 when variable $1 == 1 and prints $3 when variable $1 == 0.
+dnl This macro mainly exists just to make configure.ac scripts more readable.
+dnl
+dnl NOTE: you need to use the [" my message"] syntax for 2nd and 3rd arguments
+dnl if you want that m4 avoid to throw away the spaces prefixed to the
+dnl argument value.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_BOOLOPT_SUMMARY],
+ [
+ if test "x$$1" = "x1" ; then
+ echo $2
+ elif test "x$$1" = "x0" ; then
+ echo $3
+ else
+ echo "$1 is $$1"
+ fi
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
+dnl
+dnl Shows a summary message to the user about the WX_* variable contents.
+dnl This macro is used typically at the end of the configure script.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG],
+ [
+ echo
+ echo " The wxWidgets build which will be used by $PACKAGE_NAME $PACKAGE_VERSION"
+ echo " has the following settings:"
+ WX_BOOLOPT_SUMMARY([WX_DEBUG], [" - DEBUG build"], [" - RELEASE build"])
+ WX_BOOLOPT_SUMMARY([WX_UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
+ WX_BOOLOPT_SUMMARY([WX_SHARED], [" - SHARED mode"], [" - STATIC mode"])
+ echo " - VERSION: $WX_VERSION"
+ echo " - PORT: $WX_PORT"
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN, WX_STANDARD_OPTIONS_SUMMARY_MSG_END
+dnl
+dnl Like WX_STANDARD_OPTIONS_SUMMARY_MSG macro but these two macros also gives info
+dnl about the configuration of the package which used the wxpresets.
+dnl
+dnl Typical usage:
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
+dnl echo " - Package setting 1: $SETTING1"
+dnl echo " - Package setting 2: $SETTING1"
+dnl ...
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_END
+dnl
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN],
+ [
+ echo
+ echo " ----------------------------------------------------------------"
+ echo " Configuration for $PACKAGE_NAME $PACKAGE_VERSION successfully completed."
+ echo " Summary of main configuration settings for $PACKAGE_NAME:"
+ WX_BOOLOPT_SUMMARY([DEBUG], [" - DEBUG build"], [" - RELEASE build"])
+ WX_BOOLOPT_SUMMARY([UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
+ WX_BOOLOPT_SUMMARY([SHARED], [" - SHARED mode"], [" - STATIC mode"])
+ ])
+
+AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_END],
+ [
+ WX_STANDARD_OPTIONS_SUMMARY_MSG
+ echo
+ echo " Now, just run make."
+ echo " ----------------------------------------------------------------"
+ echo
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl Deprecated macro wrappers
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AM_OPTIONS_WXCONFIG], [WX_CONFIG_OPTIONS])
+AC_DEFUN([AM_PATH_WXCONFIG], [
+ WX_CONFIG_CHECK([$1],[$2],[$3],[$4],[$5])
+])
+
+
projects / wxWidgets.git / blobdiff