handle volume part of the path correctly in wxFileName(path, name, ext) ctor

[wxWidgets.git] / include / wx / msw / setup0.h

diff --git a/include/wx/msw/setup0.h b/include/wx/msw/setup0.h
index eb4094aaac690c57e2e97ec86a257aa3c33b1fc4..233a7dc00b9bad5e2617abd0ef525f0c5a6228a5 100644 (file)
--- a/include/wx/msw/setup0.h
+++ b/include/wx/msw/setup0.h
@@ -67,7 +67,7 @@
 // Generic comment about debugging settings: they are very useful if you don't
 // use any other memory leak detection tools such as Purify/BoundsChecker, but
 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
 // Generic comment about debugging settings: they are very useful if you don't
 // use any other memory leak detection tools such as Purify/BoundsChecker, but
 // are probably redundant otherwise. Also, Visual C++ CRT has the same features

-// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you

 // may prefer to use it instead of built in memory debugging code because it is
 // faster and more fool proof.
 //
 // may prefer to use it instead of built in memory debugging code because it is
 // faster and more fool proof.
 //


@@ -126,7 +126,8 @@
 // Default is 1
 //
 // Recommended setting: 1 if your compiler supports it.
 // Default is 1
 //
 // Recommended setting: 1 if your compiler supports it.

-#ifdef _MSC_VER
+#if defined(_MSC_VER) || \
+    (defined(__BORLANDC__) && __BORLANDC__ >= 0x0550)

     #define wxUSE_ON_FATAL_EXCEPTION 1
 #else
     #define wxUSE_ON_FATAL_EXCEPTION 0
     #define wxUSE_ON_FATAL_EXCEPTION 1
 #else
     #define wxUSE_ON_FATAL_EXCEPTION 0


@@ -136,7 +137,7 @@
 // Unicode support
 // ----------------------------------------------------------------------------
 
 // Unicode support
 // ----------------------------------------------------------------------------
 

-// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be

 // defined as wchar_t, wxString will use Unicode internally. If you set this
 // to 1, you must use wxT() macro for all literal strings in the program.
 //
 // defined as wchar_t, wxString will use Unicode internally. If you set this
 // to 1, you must use wxT() macro for all literal strings in the program.
 //


@@ -151,7 +152,7 @@
     #define wxUSE_UNICODE 0
 #endif
 
     #define wxUSE_UNICODE 0
 #endif
 

-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode

 // and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
 // and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note


@@ -253,7 +254,7 @@
 // Recommended setting: 0 unless you do plan to develop MT applications
 #define wxUSE_THREADS 1
 
 // Recommended setting: 0 unless you do plan to develop MT applications
 #define wxUSE_THREADS 1
 

-// If enabled (1), compiles wxWindows streams classes
+// If enabled (1), compiles wxWidgets streams classes

 #define wxUSE_STREAMS       1
 
 // Use standard C++ streams if 1. If 0, use wxWin streams implementation.
 #define wxUSE_STREAMS       1
 
 // Use standard C++ streams if 1. If 0, use wxWin streams implementation.


@@ -400,7 +401,7 @@
 
 // If enabled, the code written by Apple will be used to write, in a portable
 // way, float on the disk. See extended.c for the license which is different
 
 // If enabled, the code written by Apple will be used to write, in a portable
 // way, float on the disk. See extended.c for the license which is different

-// from wxWindows one.
+// from wxWidgets one.

 //
 // Default is 1.
 //
 //
 // Default is 1.
 //


@@ -458,13 +459,31 @@
 // wxSound class
 #define wxUSE_SOUND      1
 
 // wxSound class
 #define wxUSE_SOUND      1
 

+// wxMovieCtrl class
+//
+// Requires DirectX 7 & DirectMedia or above (link with STRMIIDS.LIB)
+//
+// Recommended setting: 0 (Nice to have, but SDK doesn't exist by default)
+#define wxUSE_MOVIECTRL 0
+
+// Use wxWidget's XRC XML-based resource system.  Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC       1
+

 // XML parsing classes. Note that their API will change in the future, so
 // using wxXmlDocument and wxXmlNode in your app is not recommended.
 //
 // Default is 1
 //
 // XML parsing classes. Note that their API will change in the future, so
 // using wxXmlDocument and wxXmlNode in your app is not recommended.
 //
 // Default is 1
 //

-// Recommended setting: 1 (needed by XRC)
-#define wxUSE_XML       1
+// Recommended setting: 1 (required by XRC)
+#if wxUSE_XRC
+#  define wxUSE_XML       1
+#else
+#  define wxUSE_XML       0
+#endif

 
 // ----------------------------------------------------------------------------
 // Individual GUI controls
 
 // ----------------------------------------------------------------------------
 // Individual GUI controls


@@ -494,7 +513,7 @@
 // Recommended setting: 1 (may be set to 0)
 #define wxUSE_TIPWINDOW    1
 
 // Recommended setting: 1 (may be set to 0)
 #define wxUSE_TIPWINDOW    1
 

-// Each of the settings below corresponds to one wxWindows control. They are
+// Each of the settings below corresponds to one wxWidgets control. They are

 // all switched on by default but may be disabled if you are sure that your
 // program (including any standard dialogs it can show!) doesn't need them and
 // if you desperately want to save some space. If you use any of these you must
 // all switched on by default but may be disabled if you are sure that your
 // program (including any standard dialogs it can show!) doesn't need them and
 // if you desperately want to save some space. If you use any of these you must


@@ -554,11 +573,8 @@
 #define wxUSE_TOOLBAR 1
 #define wxUSE_TOOLBAR_NATIVE 1
 
 #define wxUSE_TOOLBAR 1
 #define wxUSE_TOOLBAR_NATIVE 1
 

-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR    1
-

 // wxNotebook is a control with several "tabs" located on one of its sides. It
 // wxNotebook is a control with several "tabs" located on one of its sides. It

-// may be used ot logically organise the data presented to the user instead of
+// may be used to logically organise the data presented to the user instead of

 // putting everything in one huge dialog. It replaces wxTabControl and related
 // classes of wxWin 1.6x.
 //
 // putting everything in one huge dialog. It replaces wxTabControl and related
 // classes of wxWin 1.6x.
 //


@@ -575,6 +591,14 @@
 // Recommended setting: 1
 #define wxUSE_LISTBOOK 1
 
 // Recommended setting: 1
 #define wxUSE_LISTBOOK 1
 

+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+

 // wxTabDialog is a generic version of wxNotebook but it is incompatible with
 // the new class. It shouldn't be used in new code.
 //
 // wxTabDialog is a generic version of wxNotebook but it is incompatible with
 // the new class. It shouldn't be used in new code.
 //


@@ -674,15 +698,6 @@
 // common dialogs
 // ----------------------------------------------------------------------------
 
 // common dialogs
 // ----------------------------------------------------------------------------
 

-// Define 1 to use generic dialogs in Windows, even though they duplicate
-// native common dialog (e.g. wxColourDialog). This is mainly useful for
-// testing.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxUSE_GENERIC_DIALOGS_IN_MSW 0
-

 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
 // file selector, printer dialog). Switching this off also switches off the
 // printing architecture and interactive wxPrinterDC.
 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
 // file selector, printer dialog). Switching this off also switches off the
 // printing architecture and interactive wxPrinterDC.


@@ -786,10 +801,21 @@
 // Big GUI components
 // ----------------------------------------------------------------------------
 
 // Big GUI components
 // ----------------------------------------------------------------------------
 

+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 1
+

 // Set to 0 to disable document/view architecture
 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
 
 // Set to 0 to disable MDI document/view architecture
 // Set to 0 to disable document/view architecture
 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
 
 // Set to 0 to disable MDI document/view architecture

+//
+// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE

 #define wxUSE_MDI_ARCHITECTURE    1
 
 // Set to 0 to disable print/preview architecture code
 #define wxUSE_MDI_ARCHITECTURE    1
 
 // Set to 0 to disable print/preview architecture code


@@ -995,7 +1021,7 @@
 // Windows-only settings
 // ----------------------------------------------------------------------------
 
 // Windows-only settings
 // ----------------------------------------------------------------------------
 

-// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This

 // will override some other settings (see below)
 //
 // Default is 0.
 // will override some other settings (see below)
 //
 // Default is 0.