-%define pref %{_prefix}
-%define python @PYTHON@
-%define pyver @PYVER@
-%define debug @DEBUG@
-%define port @PORT@
-%define lcport @LCPORT@
+%define pref %{_prefix}
+%define python @PYTHON@
+%define pyver @PYVER@
+%define port @PORT@
+%define lcport @LCPORT@
+%define unicode @UNICODE@
%define tarname @TARNAME@
-
-%if %{debug}
- %define name wxPython%{port}_py%{pyver}_dbg
-%else
- %define name wxPython%{port}_py%{pyver}
-%endif
-%define version 2.3.3pre5
+%define version @VERSION@
+%define ver2 @VER2@
%define release 1
-
-
-Summary: Cross platform GUI toolkit for Python using wx%{port}
-Name: %{name}
-Version: %{version}
-Release: %{release}
-Source0: %{tarname}-%{version}.tar.gz
-License: wxWindows Library Licence, Version 3
-url: http://wxPython.org/
-packager: Robin Dunn <robind@alldunn.com>
-Group: Development/Python
+%define wxpref %{pref}/lib/wxPython
+%define name wxPython%{port}-py%{pyver}
+
+
+# Should the builtin image and etc. libs be used, or system libs?
+# Distro specific RPMs should probably set this to 0, generic ones
+# should use 1
+%define builtin_libs 1
+
+
+# Should --enable-debug_flag be used in release builds? Using it
+# defines __WXDEBUG__ and gives us runtime diagnostics that are turned
+# into Python exceptions starting with 2.3.4. (So turning it on is a
+# very helpful thing IMO and is recommended.)
+%define debug_flag 1
+
+
+# build the name of the real wx-config from the port, flags, etc.
+%define dbgflg %(if [ "%{debug_flag}" = "1" ]; then echo d; fi)
+%define uniflg %(if [ "%{unicode}" = "1" ]; then echo u; fi)
+%define DBGFLG %(if [ "%{debug_flag}" = "1" ]; then echo D; fi)
+%define UNIFLG %(if [ "%{unicode}" = "1" ]; then echo U; fi)
+%define wxconfigname %{wxpref}/bin/wx%{lcport}%{uniflg}%{dbgflg}-%{ver2}-config
+
+# turn off the generation of debuginfo rpm (RH9)
+%define debug_package %{nil}
+
+#----------------------------------------------------------------
+Summary: Cross platform GUI toolkit for Python using wx%{port}
+Name: %{name}
+Version: %{version}
+Release: %{release}
+Source0: %{tarname}-%{version}.tar.gz
+License: wxWindows Library Licence, Version 3
+URL: http://wxPython.org/
+Packager: Robin Dunn <robin@alldunn.com>
+Group: Development/Python
BuildRoot: %{_tmppath}/%{name}-buildroot
-Prefix: %{pref}
-
+Prefix: %{pref}
-# They conflict with each other
-%if %{debug}
-Conflicts: wxPython%{port}_py%{pyver}
-%else
-Conflicts: wxPython%{port}_py%{pyver}_dbg
-%endif
-
-Provides: wxwin
-Provides: wx%{port} = %{version}
Provides: wxPython = %{version}
+Provides: wxPython%{port} = %{version}
+Provides: libwx_%{lcport}%{uniflg}%{dbgflg}-%{ver2}.so
+Provides: libwx_%{lcport}%{uniflg}%{dbgflg}-%{ver2}.so(WX%{port}%{UNIFLG}%{DBGFLG}_%{ver2})
+Provides: libwx_%{lcport}%{uniflg}%{dbgflg}_gl-%{ver2}.so
+Provides: libwx_%{lcport}%{uniflg}%{dbgflg}_gl-%{ver2}.so(WX%{port}%{UNIFLG}%{DBGFLG}_%{ver2})
-# ?? Obsoletes: wx%{port}, wxPython
-# Some funky mandrake names
-Conflicts: wxGTK2.3, wxGTK6
+
+# old wxPython packages
+Obsoletes: wxPython wxPython%{port}
%description
window types and controls, all implemented with a native look and feel
(and native runtime speed) on the platforms it is supported on.
-This package is implemented using the GTK port of wxWindows, and
+This package is implemented using the %{port} port of wxWindows, and
includes the wx%{port} shared libs and etc.
+%package -n wxPython%{port}-devel
+Summary: wxPython%{port} development files
+Group: Development/Libraries
+Requires: wxPython%{port} = %{version}
+
+
+%description -n wxPython%{port}-devel
+This packages contains the headers and etc. for building apps or
+Python extension modules that use the same wx%{port} shared libraries
+that wxPython uses.
+
+#----------------------------------------------------------------
%prep
-%setup -n %{tarname}-%{version}
+%setup -q -n %{tarname}-%{version}
+#----------------------------------------------------------------
%build
if [ "$SMP" != "" ]; then
MAKE="make -j$SMP"
MAKE="make"
fi
+WXDIR=`pwd`
mkdir build
cd build
-# Configure, trying to reduce dependencies
-../configure --with-%{lcport} --enable-soname --prefix=%{pref} \
- --with-odbc \
+# Configure, trying to reduce external dependencies
+$WXDIR/configure --with-%{lcport} \
+ --prefix=%{wxpref} \
+ --disable-soname \
+ --enable-rpath=%{wxpref}/lib \
--with-opengl \
-%if %{debug}
- --enable-debug \
-%else
+%if %{unicode}
+ --enable-gtk2 \
+ --enable-unicode \
+%endif
+ --enable-geometry \
--enable-optimise \
+%if %{debug_flag}
+ --enable-debug_flag \
%endif
+%if %{builtin_libs}
--with-libjpeg=builtin \
--with-libpng=builtin \
--with-libtiff=builtin \
--with-zlib=builtin \
+%endif
+
# Build wxWindows
$MAKE
-cd ../locale
-make allmo
-
-
-# ** Unfortunately we have to do a bit of installation here so wxPython
-# can be built. Perhaps wx-config should be changed to be able to be
-# used from the build dir, maybe with an --inplace flag... Move these
-# three lines to %install if/when that happens.
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-cd ../build
-make prefix=$RPM_BUILD_ROOT%{pref} install
-
# Now build wxPython
-cd ../wxPython
+cd $WXDIR/wxPython
%{python} setup.py \
IN_CVS_TREE=1 \
- WX_CONFIG="$RPM_BUILD_ROOT%{pref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{pref}" \
+ NO_SCRIPTS=1 \
+ WXPORT=%{lcport} \
+ UNICODE=%{unicode} \
+ WX_CONFIG="$WXDIR/build/wx-config --prefix=$WXDIR --exec-prefix=$WXDIR/build" \
build
-%install
-## ** [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-%find_lang wxstd
-cd wxPython
-%{python} setup.py \
- IN_CVS_TREE=1 \
- WX_CONFIG="$RPM_BUILD_ROOT%{pref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{pref}" \
- install \
- --root=$RPM_BUILD_ROOT
+# Build wxrc (XRC resource tool) but don't use the makefiles since they expect
+# a shared version of the xrc lib to have been built...
+cd $WXDIR/contrib/utils/wxrc
+WX_CONFIG="$WXDIR/build/wx-config --prefix=$WXDIR --exec-prefix=$WXDIR/build"
+wCC=`$WX_CONFIG --cc`
+wCXX=`$WX_CONFIG --cxx`
+for f in wxrc.cpp ../../src/xrc/xml.cpp ../../src/xrc/xmlres.cpp; do
+ echo $f
+ $wCXX `$WX_CONFIG --cxxflags` -I ../../include -I ../../src/xrc/expat/xmlparse -I ../../src/xrc/expat/xmltok -c $f
+done
+for f in ../../src/xrc/expat/xmlparse/xmlparse.c ../../src/xrc/expat/xmltok/xmlrole.c ../../src/xrc/expat/xmltok/xmltok.c; do
+ echo $f
+ $wCC `$WX_CONFIG --cxxflags` -I ../../include -I ../../src/xrc/expat/xmlparse -I ../../src/xrc/expat/xmltok -c $f
+done
-%clean
-##[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+$wCXX `$WX_CONFIG --libs` *.o -o wxrc
+strip wxrc
-%post
-/sbin/ldconfig
+#----------------------------------------------------------------
+%install
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+# install wxWindows
+WXDIR=`pwd`
+cd build
+make prefix=$RPM_BUILD_ROOT%{wxpref} install
-%postun
-/sbin/ldconfig
+# install wxPython
+cd $WXDIR/wxPython
+%{python} setup.py \
+ IN_CVS_TREE=1 \
+ NO_SCRIPTS=1 \
+ WXPORT=%{lcport} \
+ UNICODE=%{unicode} \
+ WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \
+ install \
+ --root=$RPM_BUILD_ROOT
+# Since I want this RPM to be as generic as possible I won't let
+# distutils copy the scripts since it will mangle the #! line to use
+# the real python pathname. Since some distros install python 2.2 as
+# python2 and others as python, then I can't let distutils do that
+# otherwise the dependencies will be fouled up. Copy them manually
+# instead, leaving the #!/bin/env line intact.
+#
+# TODO: Should this be dependent on %{builtin_libs} or something like it?
+
+mkdir -p $RPM_BUILD_ROOT/usr/bin
+for s in \
+ helpviewer \
+ img2png \
+ img2py \
+ img2xpm \
+ pyalacarte \
+ pyalamode \
+ pycrust \
+ pywrap \
+ pyshell \
+ xrced; do
+ cp scripts/$s $RPM_BUILD_ROOT/%{pref}/bin
+done
+
+
+# Install wxrc
+cp $WXDIR/contrib/utils/wxrc/wxrc $RPM_BUILD_ROOT/%{pref}/bin
+
+
+# Copy icons and make menu entries
+#-- This only works for Mandrake. Is there a cross-distro way to do it?
+##mkdir -p $RPM_BUILD_ROOT/%{_iconsdir}
+##mkdir -p $RPM_BUILD_ROOT/%{_miconsdir}
+##mkdir -p $RPM_BUILD_ROOT/%{_menudir}
+##install -p -m 644 $WXDIR/wxPython/wxPython/py/PyCrust_32.png $RPM_BUILD_ROOT/%{_iconsdir}/PyCrust.png
+##install -p -m 644 $WXDIR/wxPython/wxPython/py/PyCrust_16.png $RPM_BUILD_ROOT/%{_miconsdir}/PyCrust.png
+##install -p -m 644 $WXDIR/wxPython/wxPython/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT/%{_iconsdir}/XRCed.png
+##install -p -m 644 $WXDIR/wxPython/wxPython/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT/%{_miconsdir}/XRCed.png
+##
+##cat > $RPM_BUILD_ROOT/%{_menudir}/%{name} <<EOF
+##?package(%{name}): command="%_bindir/pyshell" needs="X11" \
+##icon="PyCrust.png" section="Applications/Development" \
+##title="PyShell" longtitle="Python Shell"
+##
+##?package(%{name}): command="%_bindir/pycrust" needs="X11" \
+##icon="PyCrust.png" section="Applications/Development" \
+##title="PyCrust" longtitle="Python Shell with Filling"
+##
+##?package(%{name}): command="%_bindir/pyalamode" needs="X11" \
+##icon="PyCrust.png" section="Applications/Development" \
+##title="PyAlaMode" longtitle="Python Shell with Filling and editor windows"
+##
+##?package(%{name}): command="%_bindir/xrced" needs="X11" \
+##icon="XRCed.png" section="Applications/Development" \
+##title="XRCed" longtitle="wxPython XRC resource editor"
+##
+##EOF
+
+
+
+# Generate the filelists. For some reason the %defattr below is still
+# resulting in many (but not all) files not owned by root when just
+# specifying directories and wildcards to be included in each package.
+# So instead we'll build some explicit filelists here and use %attr on
+# each entry.
+cd $WXDIR
+mkdir -p $RPM_BUILD_ROOT%{pref}/share/doc
+GFL="%{python} wxPython/distrib/genfilelist.py"
+$GFL $RPM_BUILD_ROOT %{pref} > FILELIST
+$GFL -r $RPM_BUILD_ROOT %{pref}/bin >> FILELIST
+$GFL $RPM_BUILD_ROOT %{pref}/lib >> FILELIST
+$GFL -r $RPM_BUILD_ROOT %{pref}/lib/python%{pyver} >> FILELIST
+$GFL -r $RPM_BUILD_ROOT %{pref}/share >> FILELIST
+$GFL $RPM_BUILD_ROOT %{wxpref} >> FILELIST
+$GFL $RPM_BUILD_ROOT %{wxpref}/lib >> FILELIST
+$GFL $RPM_BUILD_ROOT "%{wxpref}/lib/libwx*" >> FILELIST
+$GFL -r $RPM_BUILD_ROOT %{wxpref}/share >> FILELIST
+###GFL -r $RPM_BUILD_ROOT %{_iconsdir} >> FILELIST
+##$GFL -r $RPM_BUILD_ROOT %{_menudir} >> FILELIST
+
+$GFL $RPM_BUILD_ROOT %{wxpref}/include > DEVELLIST
+$GFL -r $RPM_BUILD_ROOT %{wxpref}/include/wx >> DEVELLIST
+$GFL -r $RPM_BUILD_ROOT %{wxpref}/lib/wx >> DEVELLIST
+$GFL $RPM_BUILD_ROOT %{wxconfigname} >> DEVELLIST
+$GFL $RPM_BUILD_ROOT %{wxpref}/bin/wx-config >> DEVELLIST
+
+
+#----------------------------------------------------------------
+##%post
+##%{update_menus}
+##
+##%postun
+##%{clean_menus}
+
+#----------------------------------------------------------------
+%clean
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-%files
+#----------------------------------------------------------------
+
+%files -f FILELIST
%defattr(-,root,root)
-%{_libdir}/libwx*
-%{_libdir}/python*
-%{_datadir}
+%doc docs/preamble.txt docs/licence.txt docs/readme.txt docs/changes.txt
+%doc wxPython/README.txt wxPython/CHANGES.txt
+%doc wxPython/docs/*
+%files -n wxPython%{port}-devel -f DEVELLIST
+%defattr(-,root,root)
-%changelog
+#----------------------------------------------------------------
# end of file
projects / wxWidgets.git / blobdiff