// Purpose: interface of wxStreamBase and its derived classes
// Author: wxWidgets team
// RCS-ID: $Id$
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
+
/**
- @class wxCountingOutputStream
+ These enumeration values are returned by various functions in the context
+ of wxStream classes.
+*/
+enum wxStreamError
+{
+ wxSTREAM_NO_ERROR = 0, //!< No error occurred.
+ wxSTREAM_EOF, //!< EOF reached in Read() or similar.
+ wxSTREAM_WRITE_ERROR, //!< generic write error on the last write call.
+ wxSTREAM_READ_ERROR //!< generic read error on the last read call.
+};
- wxCountingOutputStream is a specialized output stream which does not write any
- data anywhere, instead it counts how many bytes would get written if this were a
- normal stream. This can sometimes be useful or required if some data gets
- serialized to a stream or compressed by using stream compression and thus the
- final size of the stream cannot be known other than pretending to write the stream.
- One case where the resulting size would have to be known is if the data has
- to be written to a piece of memory and the memory has to be allocated before
- writing to it (which is probably always the case when writing to a memory stream).
+/**
+ @class wxStreamBase
+
+ This class is the base class of most stream related classes in wxWidgets.
+ It must not be used directly.
@library{wxbase}
@category{streams}
+
+ @see wxStreamBuffer
*/
-class wxCountingOutputStream : public wxOutputStream
+class wxStreamBase
{
public:
/**
- Creates a wxCountingOutputStream object.
+ Creates a dummy stream object. It doesn't do anything.
*/
- wxCountingOutputStream();
+ wxStreamBase();
/**
Destructor.
*/
- virtual ~wxCountingOutputStream();
+ virtual ~wxStreamBase();
/**
- Returns the current size of the stream.
+ This function returns the last error.
*/
- size_t GetSize() const;
-};
+ wxStreamError GetLastError() const;
+ /**
+ Returns the length of the stream in bytes. If the length cannot be
+ determined (this is always the case for socket streams for example),
+ returns ::wxInvalidOffset.
+ @since 2.5.4
+ */
+ virtual wxFileOffset GetLength() const;
-/**
- @class wxBufferedInputStream
+ /**
+ This function returns the size of the stream.
+ For example, for a file it is the size of the file.
- This stream acts as a cache. It caches the bytes read from the specified
- input stream (see wxFilterInputStream).
- It uses wxStreamBuffer and sets the default in-buffer size to 1024 bytes.
- This class may not be used without some other stream to read the data
- from (such as a file stream or a memory stream).
+ @warning
+ There are streams which do not have size by definition, such as socket
+ streams. In that cases, GetSize() returns 0 so you should always test its
+ return value.
+ */
+ virtual size_t GetSize() const;
- @library{wxbase}
- @category{streams}
+ /**
+ Returns @true if no error occurred on the stream.
+
+ @see GetLastError()
+ */
+ virtual bool IsOk() const;
- @see wxStreamBuffer, wxInputStream, wxBufferedOutputStream
-*/
-class wxBufferedInputStream : public wxFilterInputStream
-{
-public:
/**
- Constructor.
- If a non @NULL buffer is given to the stream, it will be deleted by it.
+ Returns @true if the stream supports seeking to arbitrary offsets.
*/
- wxBufferedInputStream(wxInputStream& stream,
- wxStreamBuffer *buffer = NULL);
+ virtual bool IsSeekable() const;
/**
- Destructor.
+ Resets the stream state.
+
+ By default, resets the stream to good state, i.e. clears any errors.
+ Since wxWidgets 2.9.3 can be also used to explicitly set the state to
+ the specified error (the @a error argument didn't exist in the previous
+ versions).
+
+ @see GetLastError()
+ */
+ void Reset(wxStreamError error = wxSTREAM_NO_ERROR);
+
+ /**
+ Returns the opposite of IsOk().
+ You can use this function to test the validity of the stream as if
+ it was a pointer:
+
+ @code
+ bool DoSomething(wxInputStream& stream)
+ {
+ wxInt32 data;
+ if (!stream.Read(&data, 4))
+ return false;
+ ...
+ }
+ @endcode
*/
- virtual ~wxBufferedInputStream();
-};
+ bool operator!() const;
+protected:
+ /**
+ Internal function.
+ It is called when the stream needs to change the current position.
+
+ @param pos
+ Offset to seek to.
+ @param mode
+ One of the ::wxSeekMode enumeration values.
+
+ @return The new stream position or ::wxInvalidOffset on error.
+ */
+ virtual wxFileOffset OnSysSeek(wxFileOffset pos, wxSeekMode mode);
+
+ /**
+ Internal function.
+ It is called when the stream needs to know the real position.
+
+ @return The current stream position.
+ */
+ virtual wxFileOffset OnSysTell() const;
+};
/**
@class wxStreamBuffer
- @todo WRITE A DESCRIPTION
+ wxStreamBuffer is a cache manager for wxStreamBase: it manages a stream buffer
+ linked to a stream.
+
+ Each stream always has one autoinitialized stream buffer, but you may
+ attach more of them to the same stream.
@library{wxbase}
@category{streams}
- @see wxStreamBase
+ @see wxStreamBase, @ref overview_stream
*/
class wxStreamBuffer
{
public:
+ /** BufMode flags */
+ enum BufMode
+ {
+ read,
+ write,
+ read_write
+ };
/**
Constructor, creates a new stream buffer using @a stream as a parent stream
@code
streambuffer.Read(...);
- streambuffer2.Read(...); // This call erases previous error messages set by 'streambuffer'
+ streambuffer2.Read(...);
+ // This call erases previous error messages set by 'streambuffer'
+ // assuming that both instances are stream buffers for the same stream
@endcode
@see SetBufferIO()
*/
wxStreamBuffer(wxStreamBase& stream, BufMode mode);
+ /**
+ Constructor for an input buffer of the specified size.
+
+ Using it is equivalent to using the constructor above with read mode
+ and calling SetBufferIO() but is more convenient.
+
+ @since 2.9.0
+
+ @param bufsize
+ The size of buffer in bytes.
+ @param stream
+ The associated input stream, the buffer will be used in read mode.
+ */
+ wxStreamBuffer(size_t bufsize, wxInputStream& stream);
+
+ /**
+ Constructor for an output buffer of the specified size.
+
+ Using it is equivalent to using the constructor above with write mode
+ and calling SetBufferIO() but is more convenient.
+
+ @since 2.9.0
+
+ @param bufsize
+ The size of buffer in bytes.
+ @param stream
+ The associated output stream, the buffer will be used in write mode.
+ */
+ wxStreamBuffer(size_t bufsize, wxOutputStream& stream);
+
/**
Constructor; creates a new empty stream buffer which won't flush any data
to a stream. mode specifies the type of the buffer (read, write, read_write).
wxStreamBuffer(BufMode mode);
/**
- Constructor.
+ Copy constructor.
This method initializes the stream buffer with the data of the specified
stream buffer. The new stream buffer has the same attributes, size, position
Destructor.
It finalizes all IO calls and frees all internal buffers if necessary.
*/
- wxStreamBuffer();
+ ~wxStreamBuffer();
/**
Fill the IO buffer.
/**
Returns the current position (counted in bytes) in the stream buffer.
*/
- wxFileOffset GetIntPosition() const;
+ size_t GetIntPosition() const;
/**
Returns the amount of bytes read during the last IO call to the parent stream.
@see Write()
*/
- Return value size_t Read(wxStreamBuffer* buffer);
+ size_t Read(wxStreamBuffer* buffer);
/**
Resets to the initial state variables concerning the buffer.
@return Upon successful completion, it returns the new offset as
measured in bytes from the beginning of the stream.
- Otherwise, it returns wxInvalidOffset.
+ Otherwise, it returns ::wxInvalidOffset.
*/
virtual wxFileOffset Seek(wxFileOffset pos, wxSeekMode mode);
@see wxStreamBuffer(), Fixed(), Flushable()
*/
- void SetBufferIO(char* buffer_start, char* buffer_end);
+ void SetBufferIO(void* start, void* end, bool takeOwnership = false);
/**
Destroys or invalidates the previous IO buffer and allocates a new one of the
/**
Returns the parent stream of the stream buffer.
+ @deprecated use GetStream() instead
*/
wxStreamBase* Stream();
the stream.
@return Returns the current position in the stream if possible,
- wxInvalidOffset in the other case.
+ ::wxInvalidOffset in the other case.
*/
virtual wxFileOffset Tell() const;
@class wxOutputStream
wxOutputStream is an abstract base class which may not be used directly.
+ It is the base class of all streams which provide a Write() function,
+ i.e. which can be used to output data (e.g. to a file, to a socket, etc).
+
+ If you want to create your own output stream, you'll need to derive from this
+ class and implement the protected OnSysWrite() function only.
@library{wxbase}
@category{streams}
@param mode
One of wxFromStart, wxFromEnd, wxFromCurrent.
- @return The new stream position or wxInvalidOffset on error.
+ @return The new stream position or ::wxInvalidOffset on error.
*/
virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart);
This function returns a reference on the current object, so the user can
test any states of the stream right away.
*/
- wxOutputStream Write(const void* buffer, size_t size);
+ virtual wxOutputStream& Write(const void* buffer, size_t size);
/**
Reads data from the specified input stream and stores them
in the current stream. The data is read until an error is raised
by one of the two streams.
*/
- wxOutputStream Write(wxInputStream& stream_in);
+ wxOutputStream& Write(wxInputStream& stream_in);
+
+protected:
+ /**
+ Internal function. It is called when the stream wants to write data of the
+ specified size @a bufsize into the given @a buffer.
+
+ It should return the size that was actually wrote (which maybe zero if
+ @a bufsize is zero or if an error occurred; in this last case the internal
+ variable @c m_lasterror should be appropriately set).
+ */
+ size_t OnSysWrite(const void* buffer, size_t bufsize);
+};
+
+
+/**
+ @class wxInputStream
+
+ wxInputStream is an abstract base class which may not be used directly.
+ It is the base class of all streams which provide a Read() function,
+ i.e. which can be used to read data from a source (e.g. a file, a socket, etc).
+
+ If you want to create your own input stream, you'll need to derive from this
+ class and implement the protected OnSysRead() function only.
+
+ @library{wxbase}
+ @category{streams}
+*/
+class wxInputStream : public wxStreamBase
+{
+public:
+ /**
+ Creates a dummy input stream.
+ */
+ wxInputStream();
+
+ /**
+ Destructor.
+ */
+ virtual ~wxInputStream();
+
+ /**
+ Returns @true if some data is available in the stream right now, so that
+ calling Read() wouldn't block.
+ */
+ virtual bool CanRead() const;
+
+ /**
+ Returns @true after an attempt has been made to read past the end of the
+ stream.
+ */
+ virtual bool Eof() const;
+
+ /**
+ Returns the first character in the input queue and removes it,
+ blocking until it appears if necessary.
+
+ On success returns a value between 0 - 255; on end of file returns @c wxEOF.
+ */
+ int GetC();
+
+ /**
+ Returns the last number of bytes read.
+ */
+ virtual size_t LastRead() const;
+
+ /**
+ Returns the first character in the input queue without removing it.
+ */
+ virtual char Peek();
+
+ /**
+ Reads the specified amount of bytes and stores the data in buffer.
+ To check if the call was successful you must use LastRead() to check
+ if this call did actually read @a size bytes (if it didn't, GetLastError()
+ should return a meaningful value).
+
+ @warning
+ The buffer absolutely needs to have at least the specified size.
+
+ @return This function returns a reference on the current object, so the
+ user can test any states of the stream right away.
+ */
+ virtual wxInputStream& Read(void* buffer, size_t size);
+
+ /**
+ Reads data from the input queue and stores it in the specified output stream.
+ The data is read until an error is raised by one of the two streams.
+
+ @return This function returns a reference on the current object, so the
+ user can test any states of the stream right away.
+ */
+ wxInputStream& Read(wxOutputStream& stream_out);
+
+ /**
+ Changes the stream current position.
+
+ This operation in general is possible only for seekable streams
+ (see wxStreamBase::IsSeekable()); non-seekable streams support only
+ seeking positive amounts in mode @c wxFromCurrent (this is implemented
+ by reading data and simply discarding it).
+
+ @param pos
+ Offset to seek to.
+ @param mode
+ One of wxFromStart, wxFromEnd, wxFromCurrent.
+
+ @return The new stream position or ::wxInvalidOffset on error.
+ */
+ virtual wxFileOffset SeekI(wxFileOffset pos, wxSeekMode mode = wxFromStart);
+
+ /**
+ Returns the current stream position or ::wxInvalidOffset if it's not
+ available (e.g. socket streams do not have a size nor a current stream
+ position).
+ */
+ virtual wxFileOffset TellI() const;
+
+ /**
+ This function is only useful in read mode.
+ It is the manager of the "Write-Back" buffer. This buffer acts like a
+ temporary buffer where data which has to be read during the next read IO
+ call are put. This is useful when you get a big block of data which you
+ didn't want to read: you can replace them at the top of the input queue
+ by this way.
+
+ Be very careful about this call in connection with calling SeekI() on
+ the same stream. Any call to SeekI() will invalidate any previous call
+ to this method (otherwise you could SeekI() to one position, "unread" a
+ few bytes there, SeekI() to another position and data would be either
+ lost or corrupted).
+
+ @return Returns the amount of bytes saved in the Write-Back buffer.
+ */
+ size_t Ungetch(const void* buffer, size_t size);
+
+ /**
+ This function acts like the previous one except that it takes only one
+ character: it is sometimes shorter to use than the generic function.
+ */
+ bool Ungetch(char c);
+
+protected:
+
+ /**
+ Internal function. It is called when the stream wants to read data of the
+ specified size @a bufsize and wants it to be placed inside @a buffer.
+
+ It should return the size that was actually read or zero if EOF has been
+ reached or an error occurred (in this last case the internal @c m_lasterror
+ variable should be set accordingly as well).
+ */
+ size_t OnSysRead(void* buffer, size_t bufsize) = 0;
+};
+
+
+
+
+/**
+ @class wxCountingOutputStream
+
+ wxCountingOutputStream is a specialized output stream which does not write any
+ data anywhere, instead it counts how many bytes would get written if this were a
+ normal stream. This can sometimes be useful or required if some data gets
+ serialized to a stream or compressed by using stream compression and thus the
+ final size of the stream cannot be known other than pretending to write the stream.
+ One case where the resulting size would have to be known is if the data has
+ to be written to a piece of memory and the memory has to be allocated before
+ writing to it (which is probably always the case when writing to a memory stream).
+
+ @library{wxbase}
+ @category{streams}
+*/
+class wxCountingOutputStream : public wxOutputStream
+{
+public:
+ /**
+ Creates a wxCountingOutputStream object.
+ */
+ wxCountingOutputStream();
+
+ /**
+ Destructor.
+ */
+ virtual ~wxCountingOutputStream();
+
+ /**
+ Returns the current size of the stream.
+ */
+ size_t GetSize() const;
+};
+
+
+/**
+ @class wxBufferedInputStream
+
+ This stream acts as a cache. It caches the bytes read from the specified
+ input stream (see wxFilterInputStream).
+ It uses wxStreamBuffer and sets the default in-buffer size to 1024 bytes.
+ This class may not be used without some other stream to read the data
+ from (such as a file stream or a memory stream).
+
+ @library{wxbase}
+ @category{streams}
+
+ @see wxStreamBuffer, wxInputStream, wxBufferedOutputStream
+*/
+class wxBufferedInputStream : public wxFilterInputStream
+{
+public:
+ /**
+ Constructor using the provided buffer or default.
+
+ @param stream
+ The associated low-level stream.
+ @param buffer
+ The buffer to use if non-@NULL. Notice that the ownership of this
+ buffer is taken by the stream, i.e. it will delete it. If this
+ parameter is @NULL a default 1KB buffer is used.
+ */
+ wxBufferedInputStream(wxInputStream& stream,
+ wxStreamBuffer *buffer = NULL);
+
+ /**
+ Constructor allowing to specify the size of the buffer.
+
+ This is just a more convenient alternative to creating a wxStreamBuffer
+ of the given size and using the other overloaded constructor of this
+ class.
+
+ @param stream
+ The associated low-level stream.
+ @param bufsize
+ The size of the buffer, in bytes.
+
+ @since 2.9.0
+ */
+ wxBufferedInputStream(wxInputStream& stream, size_t bufsize);
+
+ /**
+ Destructor.
+ */
+ virtual ~wxBufferedInputStream();
};
+
+
/**
Enumeration values used by wxFilterClassFactory.
*/
wxSTREAM_FILEEXT //!< File extensions the stream handles.
};
-
/**
@class wxFilterClassFactory
@code
factory = wxFilterClassFactory::Find(filename, wxSTREAM_FILEEXT);
if (factory)
- stream = factory-NewStream(new wxFFileInputStream(filename));
+ stream = factory->NewStream(new wxFFileInputStream(filename));
@endcode
wxFilterClassFactory::Find can also search for a factory by MIME type,
const wxFilterClassFactory *factory = wxFilterClassFactory::GetFirst();
while (factory) {
- list << factory->GetProtocol() << _T("\n");
+ list << factory->GetProtocol() << wxT("\n");
factory = factory->GetNext();
}
@endcode
GetFirst()/GetNext() return a pointer to a factory or @NULL if no more
are available. They do not give away ownership of the factory.
*/
- static const wxFilterClassFactory* GetFirst() const;
+ static const wxFilterClassFactory* GetFirst();
const wxFilterClassFactory* GetNext() const;
//@}
const wxChar *const *p;
for (p = factory->GetProtocols(wxSTREAM_FILEEXT); *p; p++)
- list << *p << _T("\n");
+ list << *p << wxT("\n");
@endcode
*/
- const wxChar* const* GetProtocols(wxStreamProtocolType type = wxSTREAM_PROTOCOL) const;
+ virtual const wxChar * const* GetProtocols(wxStreamProtocolType type = wxSTREAM_PROTOCOL) const = 0;
//@{
/**
If the parent stream is passed as a pointer then the new filter stream
takes ownership of it. If it is passed by reference then it does not.
*/
- wxFilterInputStream* NewStream(wxInputStream& stream) const;
- wxFilterOutputStream* NewStream(wxOutputStream& stream) const;
- wxFilterInputStream* NewStream(wxInputStream* stream) const;
- wxFilterOutputStream* NewStream(wxOutputStream* stream) const;
+ virtual wxFilterInputStream* NewStream(wxInputStream& stream) const = 0;
+ virtual wxFilterOutputStream* NewStream(wxOutputStream& stream) const = 0;
+ virtual wxFilterInputStream* NewStream(wxInputStream* stream) const = 0;
+ virtual wxFilterOutputStream* NewStream(wxOutputStream* stream) const = 0;
//@}
/**
{
public:
/**
- @todo WRITE DESCRIPTION
+ Constructor using the provided buffer or default.
+
+ @param stream
+ The associated low-level stream.
+ @param buffer
+ The buffer to use if non-@NULL. Notice that the ownership of this
+ buffer is taken by the stream, i.e. it will delete it. If this
+ parameter is @NULL a default 1KB buffer is used.
*/
wxBufferedOutputStream(wxOutputStream& stream,
wxStreamBuffer *buffer = NULL);
- /**
- Destructor. Calls Sync() and destroys the internal buffer.
- */
- virtual ~wxBufferedOutputStream();
-
- /**
- Calls Sync() and changes the stream position.
- */
- virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart)
-
- /**
- Flushes the buffer and calls Sync() on the parent stream.
- */
- virtual void Sync();
-};
-
-
-
-/**
- @class wxInputStream
-
- wxInputStream is an abstract base class which may not be used directly.
-
- @library{wxbase}
- @category{streams}
-*/
-class wxInputStream : public wxStreamBase
-{
-public:
- /**
- Creates a dummy input stream.
- */
- wxInputStream();
-
- /**
- Destructor.
- */
- virtual ~wxInputStream();
-
- /**
- Returns @true if some data is available in the stream right now, so that
- calling Read() wouldn't block.
- */
- virtual bool CanRead() const;
-
- /**
- Returns @true after an attempt has been made to read past the end of the
- stream.
- */
- virtual bool Eof() const;
-
- /**
- Returns the first character in the input queue and removes it,
- blocking until it appears if necessary.
- */
- char GetC();
-
- /**
- Returns the last number of bytes read.
- */
- virtual size_t LastRead() const;
-
- /**
- Returns the first character in the input queue without removing it.
- */
- virtual char Peek();
/**
- Reads the specified amount of bytes and stores the data in buffer.
-
- @warning
- The buffer absolutely needs to have at least the specified size.
-
- @return This function returns a reference on the current object, so the
- user can test any states of the stream right away.
- */
- wxInputStream Read(void* buffer, size_t size);
-
- /**
- Reads data from the input queue and stores it in the specified output stream.
- The data is read until an error is raised by one of the two streams.
-
- @return This function returns a reference on the current object, so the
- user can test any states of the stream right away.
- */
- wxInputStream& Read(wxOutputStream& stream_out);
+ Constructor allowing to specify the size of the buffer.
- /**
- Changes the stream current position.
+ This is just a more convenient alternative to creating a wxStreamBuffer
+ of the given size and using the other overloaded constructor of this
+ class.
- @param pos
- Offset to seek to.
- @param mode
- One of wxFromStart, wxFromEnd, wxFromCurrent.
+ @param stream
+ The associated low-level stream.
+ @param bufsize
+ The size of the buffer, in bytes.
- @return The new stream position or wxInvalidOffset on error.
- */
- virtual wxFileOffset SeekI(wxFileOffset pos, wxSeekMode mode = wxFromStart);
+ @since 2.9.0
+ */
+ wxBufferedOutputStream(wxOutputStream& stream, size_t bufsize);
/**
- Returns the current stream position.
+ Destructor. Calls Sync() and destroys the internal buffer.
*/
- virtual wxFileOffset TellI() const;
+ virtual ~wxBufferedOutputStream();
/**
- This function is only useful in read mode.
- It is the manager of the "Write-Back" buffer. This buffer acts like a
- temporary buffer where data which has to be read during the next read IO
- call are put. This is useful when you get a big block of data which you
- didn't want to read: you can replace them at the top of the input queue
- by this way.
-
- Be very careful about this call in connection with calling SeekI() on
- the same stream. Any call to SeekI() will invalidate any previous call
- to this method (otherwise you could SeekI() to one position, "unread" a
- few bytes there, SeekI() to another position and data would be either
- lost or corrupted).
-
- @return Returns the amount of bytes saved in the Write-Back buffer.
+ Calls Sync() and changes the stream position.
*/
- size_t Ungetch(const char* buffer, size_t size);
+ virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart);
/**
- This function acts like the previous one except that it takes only one
- character: it is sometimes shorter to use than the generic function.
+ Flushes the buffer and calls Sync() on the parent stream.
*/
- Return value bool Ungetch(char c);
+ virtual void Sync();
};
/**
- These enumeration values are returned by various functions in the context
- of wxStream classes.
-*/
-enum wxStreamError
-{
- wxSTREAM_NO_ERROR = 0, //!< No error occurred.
- wxSTREAM_EOF, //!< EOF reached in Read() or similar.
- wxSTREAM_WRITE_ERROR, //!< generic write error on the last write call.
- wxSTREAM_READ_ERROR //!< generic read error on the last read call.
-};
+ @class wxWrapperInputStream
-/**
- @class wxStreamBase
+ A wrapper input stream is a kind of filter stream which forwards all the
+ operations to its base stream. This is useful to build utility classes such
+ as wxFSInputStream.
- This class is the base class of most stream related classes in wxWidgets.
- It must not be used directly.
+ @note
+ The interface of this class is the same as that of wxInputStream.
+ Only a constructor differs and it is documented below.
@library{wxbase}
@category{streams}
- @see wxStreamBuffer
+ @see wxFSInputStream, wxFilterInputStream
+ @since 2.9.4
*/
-class wxStreamBase
+class wxWrapperInputStream : public wxFilterInputStream
{
public:
+ //@{
/**
- Creates a dummy stream object. It doesn't do anything.
- */
- wxStreamBase();
-
- /**
- Destructor.
- */
- virtual ~wxStreamBase();
-
- /**
- This function returns the last error.
- */
- wxStreamError GetLastError() const;
-
- /**
- Returns the length of the stream in bytes. If the length cannot be
- determined (this is always the case for socket streams for example),
- returns @c wxInvalidOffset.
-
- @since 2.5.4
- */
- virtual wxFileOffset GetLength() const;
-
- /**
- This function returns the size of the stream.
- For example, for a file it is the size of the file.
-
- @warning
- There are streams which do not have size by definition, such as socket
- streams. In that cases, GetSize returns 0 so you should always test its
- return value.
- */
- virtual size_t GetSize() const;
-
- /**
- Returns @true if no error occurred on the stream.
+ Initializes a wrapper stream.
- @see GetLastError()
+ If the parent stream is passed as a pointer then the new wrapper stream
+ takes ownership of it. If it is passed by reference then it does not.
*/
- virtual bool IsOk() const;
+ wxWrapperInputStream(wxInputStream& stream);
+ wxWrapperInputStream(wxInputStream* stream);
+ //@}
+protected:
/**
- Returns @true if the streams supports seeking to arbitrary offsets.
- */
- virtual bool IsSeekable() const;
+ Default constructor, use InitParentStream() to finish initialization.
- /**
- Internal function. It is called when the stream wants to read data of the
- specified size. It should return the size that was actually read.
- */
- size_t OnSysRead(void* buffer, size_t bufsize);
+ This constructor can be used by the derived classes from their own
+ constructors when the parent stream can't be specified immediately.
+ The derived class must call InitParentStream() later to do it.
+ */
+ wxWrapperInputStream();
+ //@{
/**
- Internal function.
- It is called when the stream needs to change the current position.
- */
- wxFileOffset OnSysSeek(wxFileOffset pos, wxSeekMode mode);
+ Set up the wrapped stream for an object initialized using the default
+ constructor.
- /**
- Internal function.
- It is called when the stream needs to know the real position.
- */
- wxFileOffset OnSysTell() const;
-
- /**
- See OnSysRead().
- */
- size_t OnSysWrite(const void* buffer, size_t bufsize);
+ The ownership logic is the same as for the non-default constructor,
+ i.e. this object takes ownership of the stream if it's passed by
+ pointer but not if it's passed by reference.
+ */
+ void InitParentStream(wxInputStream& stream);
+ void InitParentStream(wxInputStream* stream);
+ //@}
};
-
projects / wxWidgets.git / blobdiff