\section{\class{wxEncodingConverter}}\label{wxencodingconverter}
-This class is capable of converting strings between any two
+This class is capable of converting strings between two
8-bit encodings/charsets. It can also convert from/to Unicode (but only
-if you compiled wxWindows with wxUSE_UNICODE set to 1).
+if you compiled wxWidgets with wxUSE\_WCHAR\_T set to 1). Only a limited subset
+of encodings is supported by wxEncodingConverter:
+{\tt wxFONTENCODING\_ISO8859\_1..15}, {\tt wxFONTENCODING\_CP1250..1257} and
+{\tt wxFONTENCODING\_KOI8}.
+
+\wxheading{Note}
+
+Please use \helpref{wxMBConv classes}{mbconvclasses} instead
+if possible. \helpref{wxCSConv}{wxcsconv} has much better support for various
+encodings than wxEncodingConverter. wxEncodingConverter is useful only
+if you rely on {\tt wxCONVERT\_SUBSTITUTE} mode of operation (see
+\helpref{Init}{wxencodingconverterinit}).
\wxheading{Derived from}
\helpref{wxObject}{wxobject}
+\wxheading{Include files}
+
+<wx/encconv.h>
+
+\wxheading{See also}
+
+\helpref{wxFontMapper}{wxfontmapper},
+\helpref{wxMBConv}{wxmbconv},
+\helpref{Writing non-English applications}{nonenglishoverview}
+
+
\latexignore{\rtfignore{\wxheading{Members}}}
+
\membersection{wxEncodingConverter::wxEncodingConverter}\label{wxencodingconverterwxencodingconverter}
\func{}{wxEncodingConverter}{\void}
Constructor.
+
\membersection{wxEncodingConverter::Init}\label{wxencodingconverterinit}
\func{bool}{Init}{\param{wxFontEncoding }{input\_enc}, \param{wxFontEncoding }{output\_enc}, \param{int }{method = wxCONVERT\_STRICT}}
-Initialize convertion. Both output or input encoding may
+Initialize conversion. Both output or input encoding may
be wxFONTENCODING\_UNICODE, but only if wxUSE\_ENCODING is set to 1.
All subsequent calls to \helpref{Convert()}{wxencodingconverterconvert}
will interpret its argument
\begin{twocollist}\itemsep=0pt
\twocolitem{{\bf wxCONVERT\_STRICT}}{follow behaviour of GNU Recode -
-just copy unconvertable characters to output and don't change them
+just copy unconvertible characters to output and don't change them
(its integer value will stay the same)}
\twocolitem{{\bf wxCONVERT\_SUBSTITUTE}}{try some (lossy) substitutions
-- e.g. replace unconvertable latin capitals with acute by ordinary
+- e.g. replace unconvertible latin capitals with acute by ordinary
capitals, replace en-dash or em-dash by '-' etc.}
\end{twocollist}
-Both modes gurantee that output string will have same length
+Both modes guarantee that output string will have same length
as input string.
\wxheading{Return value}
-FALSE if given conversion is impossible, TRUE otherwise
+false if given conversion is impossible, true otherwise
(conversion may be impossible either if you try to convert
-to Unicode with non-Unicode build of wxWindows or if input
+to Unicode with non-Unicode build of wxWidgets or if input
or output encoding is not supported.)
+
+\membersection{wxEncodingConverter::CanConvert}\label{wxencodingconvertercanconvert}
+
+\func{static bool}{CanConvert}{\param{wxFontEncoding }{encIn}, \param{wxFontEncoding }{encOut}}
+
+Return true if (any text in) multibyte encoding \arg{encIn} can be converted to
+another one ({\it encOut}) losslessly.
+
+Do not call this method with \texttt{wxFONTENCODING\_UNICODE} as either
+parameter, it doesn't make sense (always works in one sense and always depends
+on the text to convert in the other).
+
+
\membersection{wxEncodingConverter::Convert}\label{wxencodingconverterconvert}
-\func{wxString}{Convert}{\param{const wxString\& }{input}}
+\constfunc{bool}{Convert}{\param{const char* }{input}, \param{char* }{output}}
+
+\constfunc{bool}{Convert}{\param{const wchar\_t* }{input}, \param{wchar\_t* }{output}}
+
+\constfunc{bool}{Convert}{\param{const char* }{input}, \param{wchar\_t* }{output}}
+
+\constfunc{bool}{Convert}{\param{const wchar\_t* }{input}, \param{char* }{output}}
+
+Convert input string according to settings passed to
+\helpref{Init}{wxencodingconverterinit} and writes the result to {\it output}.
+
+\constfunc{bool}{Convert}{\param{char* }{str}}
+
+\constfunc{bool}{Convert}{\param{wchar\_t* }{str}}
-\func{void}{Convert}{\param{const wxChar* }{input}, \param{wxChar* }{output}}
+Convert input string according to settings passed to
+\helpref{Init}{wxencodingconverterinit} in-place, i.e. write the result to the
+same memory area.
-\func{void}{Convert}{\param{wxChar* }{str}}
+All of the versions above return \true if the conversion was lossless and
+\false if at least one of the characters couldn't be converted and was replaced
+with {\tt '?'} in the output. Note that if {\tt wxCONVERT\_SUBSTITUTE} was
+passed to \helpref{Init}{wxencodingconverterinit}, substitution is considered
+lossless operation.
-\func{void}{Convert}{\param{const char* }{input}, \param{wxChar* }{output}}
+\constfunc{wxString}{Convert}{\param{const wxString\& }{input}}
+
+Convert wxString and return new wxString object.
+
+\wxheading{Notes}
+
+You must call \helpref{Init}{wxencodingconverterinit} before using this method!
+
+{\tt wchar\_t} versions of the method are not available if wxWidgets was compiled
+with {\tt wxUSE\_WCHAR\_T} set to 0.
-Convert input string according to settings passed to \helpref{Init}{wxencodingconverterinit}.
-Note that you must call Init before using Convert!
\membersection{wxEncodingConverter::GetPlatformEquivalents}\label{wxencodingconvertergetplatformequivalents}
\item wxPLATFORM\_CURRENT
\end{itemize}
-wxPLATFORM\_CURRENT means the plaform this binary was compiled for.
+wxPLATFORM\_CURRENT means the platform this binary was compiled for.
Examples:
\end{verbatim}
Equivalence is defined in terms of convertibility:
-2 encodings are equivalent if you can convert text between
-then without loosing information (it may - and will - happen
-that you loose special chars like quotation marks or em-dashes
-but you shouldn't loose any diacritics and language-specific
+two encodings are equivalent if you can convert text between
+then without losing information (it may - and will - happen
+that you lose special chars like quotation marks or em-dashes
+but you shouldn't lose any diacritics and language-specific
characters when converting between equivalent encodings).
Remember that this function does {\bf NOT} check for presence of
\begin{itemize}\itemsep=0pt
\item Note that argument {\it enc} itself may be present in the returned array,
-so that you can - as a side effect - detect whether the
+so that you can, as a side-effect, detect whether the
encoding is native for this platform or not.
-\item helpref{Convert}{wxencodingconverterconvert} is not limited to
-converting between equivalent encodings, it can convert between arbitrary
-two encodings.
-\item If {\it enc} is present in returned array, then it is {\bf always} first
+\item \helpref{Convert}{wxencodingconverterconvert} is not limited to
+converting between equivalent encodings, it can convert between two arbitrary
+encodings.
+\item If {\it enc} is present in the returned array, then it is {\bf always} the first
item of it.
-\item Please note that the returned array may not contain any items at all.
+\item Please note that the returned array may contain no items at all.
\end{itemize}
+
\membersection{wxEncodingConverter::GetAllEquivalents}\label{wxencodingconvertergetallequivalents}
\func{static wxFontEncodingArray}{GetAllEquivalents}{\param{wxFontEncoding }{enc}}
Similar to
\helpref{GetPlatformEquivalents}{wxencodingconvertergetplatformequivalents},
but this one will return ALL
-equivalent encodings, regardless the platform, and including itself.
+equivalent encodings, regardless of the platform, and including itself.
This platform's encodings are before others in the array. And again, if {\it enc} is in the array,
it is the very first item in it.
projects / wxWidgets.git / blobdiff