+
+
+
+
+
# Configure paths for GTK+
# Owen Taylor 97-11-3
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1009: checking host system type" >&5
+echo "configure:1014: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1030: checking target system type" >&5
+echo "configure:1035: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1048: checking build system type" >&5
+echo "configure:1053: checking build system type" >&5
build_alias=$build
case "$build_alias" in
PROGRAM_EXT=".exe"
DEFAULT_DEFAULT_wxUSE_PM=1
- LIBS="$LIBS -lstdcpp"
;;
powerpc-*-darwin* )
for toolkit in `echo $ALL_TOOLKITS`; do
- LINE=`grep "wxUSE_$toolkit" ${wx_arg_cache_file}`
- if test "x$LINE" != x ; then
+ LINE=`grep "wxUSE_$toolkit=" ${wx_arg_cache_file}`
+ if test "x$LINE" != "x" ; then
has_toolkit_in_cache=1
eval "DEFAULT_$LINE"
eval "CACHE_$toolkit=1"
echo $ac_n "checking for --enable-gui""... $ac_c" 1>&6
-echo "configure:1750: checking for --enable-gui" >&5
+echo "configure:1754: checking for --enable-gui" >&5
no_cache=0
# Check whether --enable-gui or --disable-gui was given.
if test "${enable_gui+set}" = set; then
echo $ac_n "checking for --enable-universal""... $ac_c" 1>&6
-echo "configure:1792: checking for --enable-universal" >&5
+echo "configure:1796: checking for --enable-universal" >&5
no_cache=0
# Check whether --enable-universal or --disable-universal was given.
if test "${enable_universal+set}" = set; then
echo $ac_n "checking for --enable-nanox""... $ac_c" 1>&6
-echo "configure:1885: checking for --enable-nanox" >&5
+echo "configure:1889: checking for --enable-nanox" >&5
no_cache=0
# Check whether --enable-nanox or --disable-nanox was given.
if test "${enable_nanox+set}" = set; then
fi
-# Check whether --enable-gtk2 or --disable-gtk2 was given.
+
+ echo $ac_n "checking for --enable-gtk2""... $ac_c" 1>&6
+echo "configure:1929: checking for --enable-gtk2" >&5
+ no_cache=0
+ # Check whether --enable-gtk2 or --disable-gtk2 was given.
if test "${enable_gtk2+set}" = set; then
enableval="$enable_gtk2"
- wxUSE_GTK2="yes"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gtk2='wxUSE_GTK2=yes'
+ else
+ ac_cv_use_gtk2='wxUSE_GTK2=no'
+ fi
+
else
- wxUSE_GTK2="no"
+
+ LINE=`grep "wxUSE_GTK2" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gtk2='wxUSE_GTK2='$DEFAULT_wxUSE_GTK2
+
fi
+ eval "$ac_cv_use_gtk2"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gtk2 >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GTK2" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
echo $ac_n "checking for --with-libpng""... $ac_c" 1>&6
-echo "configure:1934: checking for --with-libpng" >&5
+echo "configure:1969: checking for --with-libpng" >&5
no_cache=0
# Check whether --with-libpng or --without-libpng was given.
if test "${with_libpng+set}" = set; then
echo $ac_n "checking for --with-libjpeg""... $ac_c" 1>&6
-echo "configure:1985: checking for --with-libjpeg" >&5
+echo "configure:2020: checking for --with-libjpeg" >&5
no_cache=0
# Check whether --with-libjpeg or --without-libjpeg was given.
if test "${with_libjpeg+set}" = set; then
echo $ac_n "checking for --with-libtiff""... $ac_c" 1>&6
-echo "configure:2036: checking for --with-libtiff" >&5
+echo "configure:2071: checking for --with-libtiff" >&5
no_cache=0
# Check whether --with-libtiff or --without-libtiff was given.
if test "${with_libtiff+set}" = set; then
echo $ac_n "checking for --with-opengl""... $ac_c" 1>&6
-echo "configure:2087: checking for --with-opengl" >&5
+echo "configure:2122: checking for --with-opengl" >&5
no_cache=0
# Check whether --with-opengl or --without-opengl was given.
if test "${with_opengl+set}" = set; then
echo $ac_n "checking for --with-dmalloc""... $ac_c" 1>&6
-echo "configure:2129: checking for --with-dmalloc" >&5
+echo "configure:2164: checking for --with-dmalloc" >&5
no_cache=0
# Check whether --with-dmalloc or --without-dmalloc was given.
if test "${with_dmalloc+set}" = set; then
echo $ac_n "checking for --with-regex""... $ac_c" 1>&6
-echo "configure:2168: checking for --with-regex" >&5
+echo "configure:2203: checking for --with-regex" >&5
no_cache=0
# Check whether --with-regex or --without-regex was given.
if test "${with_regex+set}" = set; then
echo $ac_n "checking for --with-zlib""... $ac_c" 1>&6
-echo "configure:2219: checking for --with-zlib" >&5
+echo "configure:2254: checking for --with-zlib" >&5
no_cache=0
# Check whether --with-zlib or --without-zlib was given.
if test "${with_zlib+set}" = set; then
echo $ac_n "checking for --with-odbc""... $ac_c" 1>&6
-echo "configure:2270: checking for --with-odbc" >&5
+echo "configure:2305: checking for --with-odbc" >&5
no_cache=0
# Check whether --with-odbc or --without-odbc was given.
if test "${with_odbc+set}" = set; then
echo $ac_n "checking for --enable-shared""... $ac_c" 1>&6
-echo "configure:2311: checking for --enable-shared" >&5
+echo "configure:2346: checking for --enable-shared" >&5
no_cache=0
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
echo $ac_n "checking for --enable-soname""... $ac_c" 1>&6
-echo "configure:2350: checking for --enable-soname" >&5
+echo "configure:2385: checking for --enable-soname" >&5
no_cache=0
# Check whether --enable-soname or --disable-soname was given.
if test "${enable_soname+set}" = set; then
echo $ac_n "checking for --enable-optimise""... $ac_c" 1>&6
-echo "configure:2389: checking for --enable-optimise" >&5
+echo "configure:2424: checking for --enable-optimise" >&5
no_cache=0
# Check whether --enable-optimise or --disable-optimise was given.
if test "${enable_optimise+set}" = set; then
echo $ac_n "checking for --enable-debug""... $ac_c" 1>&6
-echo "configure:2428: checking for --enable-debug" >&5
+echo "configure:2463: checking for --enable-debug" >&5
no_cache=0
# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
echo $ac_n "checking for --enable-precomp""... $ac_c" 1>&6
-echo "configure:2468: checking for --enable-precomp" >&5
+echo "configure:2503: checking for --enable-precomp" >&5
no_cache=0
# Check whether --enable-precomp or --disable-precomp was given.
if test "${enable_precomp+set}" = set; then
echo $ac_n "checking for --enable-debug_flag""... $ac_c" 1>&6
-echo "configure:2516: checking for --enable-debug_flag" >&5
+echo "configure:2551: checking for --enable-debug_flag" >&5
no_cache=0
# Check whether --enable-debug_flag or --disable-debug_flag was given.
if test "${enable_debug_flag+set}" = set; then
echo $ac_n "checking for --enable-debug_info""... $ac_c" 1>&6
-echo "configure:2555: checking for --enable-debug_info" >&5
+echo "configure:2590: checking for --enable-debug_info" >&5
no_cache=0
# Check whether --enable-debug_info or --disable-debug_info was given.
if test "${enable_debug_info+set}" = set; then
echo $ac_n "checking for --enable-debug_gdb""... $ac_c" 1>&6
-echo "configure:2594: checking for --enable-debug_gdb" >&5
+echo "configure:2629: checking for --enable-debug_gdb" >&5
no_cache=0
# Check whether --enable-debug_gdb or --disable-debug_gdb was given.
if test "${enable_debug_gdb+set}" = set; then
echo $ac_n "checking for --enable-debug_cntxt""... $ac_c" 1>&6
-echo "configure:2633: checking for --enable-debug_cntxt" >&5
+echo "configure:2668: checking for --enable-debug_cntxt" >&5
no_cache=0
# Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
if test "${enable_debug_cntxt+set}" = set; then
echo $ac_n "checking for --enable-mem_tracing""... $ac_c" 1>&6
-echo "configure:2672: checking for --enable-mem_tracing" >&5
+echo "configure:2707: checking for --enable-mem_tracing" >&5
no_cache=0
# Check whether --enable-mem_tracing or --disable-mem_tracing was given.
if test "${enable_mem_tracing+set}" = set; then
echo $ac_n "checking for --enable-profile""... $ac_c" 1>&6
-echo "configure:2711: checking for --enable-profile" >&5
+echo "configure:2746: checking for --enable-profile" >&5
no_cache=0
# Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
echo $ac_n "checking for --enable-no_rtti""... $ac_c" 1>&6
-echo "configure:2750: checking for --enable-no_rtti" >&5
+echo "configure:2785: checking for --enable-no_rtti" >&5
no_cache=0
# Check whether --enable-no_rtti or --disable-no_rtti was given.
if test "${enable_no_rtti+set}" = set; then
echo $ac_n "checking for --enable-no_exceptions""... $ac_c" 1>&6
-echo "configure:2789: checking for --enable-no_exceptions" >&5
+echo "configure:2824: checking for --enable-no_exceptions" >&5
no_cache=0
# Check whether --enable-no_exceptions or --disable-no_exceptions was given.
if test "${enable_no_exceptions+set}" = set; then
echo $ac_n "checking for --enable-permissive""... $ac_c" 1>&6
-echo "configure:2828: checking for --enable-permissive" >&5
+echo "configure:2863: checking for --enable-permissive" >&5
no_cache=0
# Check whether --enable-permissive or --disable-permissive was given.
if test "${enable_permissive+set}" = set; then
echo $ac_n "checking for --enable-no_deps""... $ac_c" 1>&6
-echo "configure:2867: checking for --enable-no_deps" >&5
+echo "configure:2902: checking for --enable-no_deps" >&5
no_cache=0
# Check whether --enable-no_deps or --disable-no_deps was given.
if test "${enable_no_deps+set}" = set; then
echo $ac_n "checking for --enable-compat20""... $ac_c" 1>&6
-echo "configure:2907: checking for --enable-compat20" >&5
+echo "configure:2942: checking for --enable-compat20" >&5
no_cache=0
# Check whether --enable-compat20 or --disable-compat20 was given.
if test "${enable_compat20+set}" = set; then
echo $ac_n "checking for --enable-compat22""... $ac_c" 1>&6
-echo "configure:2946: checking for --enable-compat22" >&5
+echo "configure:2981: checking for --enable-compat22" >&5
no_cache=0
# Check whether --enable-compat22 or --disable-compat22 was given.
if test "${enable_compat22+set}" = set; then
echo $ac_n "checking for --enable-intl""... $ac_c" 1>&6
-echo "configure:2999: checking for --enable-intl" >&5
+echo "configure:3034: checking for --enable-intl" >&5
no_cache=0
# Check whether --enable-intl or --disable-intl was given.
if test "${enable_intl+set}" = set; then
echo $ac_n "checking for --enable-config""... $ac_c" 1>&6
-echo "configure:3038: checking for --enable-config" >&5
+echo "configure:3073: checking for --enable-config" >&5
no_cache=0
# Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
echo $ac_n "checking for --enable-protocols""... $ac_c" 1>&6
-echo "configure:3078: checking for --enable-protocols" >&5
+echo "configure:3113: checking for --enable-protocols" >&5
no_cache=0
# Check whether --enable-protocols or --disable-protocols was given.
if test "${enable_protocols+set}" = set; then
echo $ac_n "checking for --enable-ftp""... $ac_c" 1>&6
-echo "configure:3117: checking for --enable-ftp" >&5
+echo "configure:3152: checking for --enable-ftp" >&5
no_cache=0
# Check whether --enable-ftp or --disable-ftp was given.
if test "${enable_ftp+set}" = set; then
echo $ac_n "checking for --enable-http""... $ac_c" 1>&6
-echo "configure:3156: checking for --enable-http" >&5
+echo "configure:3191: checking for --enable-http" >&5
no_cache=0
# Check whether --enable-http or --disable-http was given.
if test "${enable_http+set}" = set; then
echo $ac_n "checking for --enable-fileproto""... $ac_c" 1>&6
-echo "configure:3195: checking for --enable-fileproto" >&5
+echo "configure:3230: checking for --enable-fileproto" >&5
no_cache=0
# Check whether --enable-fileproto or --disable-fileproto was given.
if test "${enable_fileproto+set}" = set; then
echo $ac_n "checking for --enable-sockets""... $ac_c" 1>&6
-echo "configure:3234: checking for --enable-sockets" >&5
+echo "configure:3269: checking for --enable-sockets" >&5
no_cache=0
# Check whether --enable-sockets or --disable-sockets was given.
if test "${enable_sockets+set}" = set; then
echo $ac_n "checking for --enable-ipc""... $ac_c" 1>&6
-echo "configure:3274: checking for --enable-ipc" >&5
+echo "configure:3309: checking for --enable-ipc" >&5
no_cache=0
# Check whether --enable-ipc or --disable-ipc was given.
if test "${enable_ipc+set}" = set; then
echo $ac_n "checking for --enable-cmdline""... $ac_c" 1>&6
-echo "configure:3314: checking for --enable-cmdline" >&5
+echo "configure:3349: checking for --enable-cmdline" >&5
no_cache=0
# Check whether --enable-cmdline or --disable-cmdline was given.
if test "${enable_cmdline+set}" = set; then
echo $ac_n "checking for --enable-datetime""... $ac_c" 1>&6
-echo "configure:3353: checking for --enable-datetime" >&5
+echo "configure:3388: checking for --enable-datetime" >&5
no_cache=0
# Check whether --enable-datetime or --disable-datetime was given.
if test "${enable_datetime+set}" = set; then
echo $ac_n "checking for --enable-timedate""... $ac_c" 1>&6
-echo "configure:3392: checking for --enable-timedate" >&5
+echo "configure:3427: checking for --enable-timedate" >&5
no_cache=0
# Check whether --enable-timedate or --disable-timedate was given.
if test "${enable_timedate+set}" = set; then
echo $ac_n "checking for --enable-stopwatch""... $ac_c" 1>&6
-echo "configure:3431: checking for --enable-stopwatch" >&5
+echo "configure:3466: checking for --enable-stopwatch" >&5
no_cache=0
# Check whether --enable-stopwatch or --disable-stopwatch was given.
if test "${enable_stopwatch+set}" = set; then
echo $ac_n "checking for --enable-dialupman""... $ac_c" 1>&6
-echo "configure:3470: checking for --enable-dialupman" >&5
+echo "configure:3505: checking for --enable-dialupman" >&5
no_cache=0
# Check whether --enable-dialupman or --disable-dialupman was given.
if test "${enable_dialupman+set}" = set; then
echo $ac_n "checking for --enable-apple_ieee""... $ac_c" 1>&6
-echo "configure:3509: checking for --enable-apple_ieee" >&5
+echo "configure:3544: checking for --enable-apple_ieee" >&5
no_cache=0
# Check whether --enable-apple_ieee or --disable-apple_ieee was given.
if test "${enable_apple_ieee+set}" = set; then
echo $ac_n "checking for --enable-timer""... $ac_c" 1>&6
-echo "configure:3548: checking for --enable-timer" >&5
+echo "configure:3583: checking for --enable-timer" >&5
no_cache=0
# Check whether --enable-timer or --disable-timer was given.
if test "${enable_timer+set}" = set; then
echo $ac_n "checking for --enable-wave""... $ac_c" 1>&6
-echo "configure:3587: checking for --enable-wave" >&5
+echo "configure:3622: checking for --enable-wave" >&5
no_cache=0
# Check whether --enable-wave or --disable-wave was given.
if test "${enable_wave+set}" = set; then
echo $ac_n "checking for --enable-fraction""... $ac_c" 1>&6
-echo "configure:3626: checking for --enable-fraction" >&5
+echo "configure:3661: checking for --enable-fraction" >&5
no_cache=0
# Check whether --enable-fraction or --disable-fraction was given.
if test "${enable_fraction+set}" = set; then
echo $ac_n "checking for --enable-dynlib""... $ac_c" 1>&6
-echo "configure:3665: checking for --enable-dynlib" >&5
+echo "configure:3700: checking for --enable-dynlib" >&5
no_cache=0
# Check whether --enable-dynlib or --disable-dynlib was given.
if test "${enable_dynlib+set}" = set; then
echo $ac_n "checking for --enable-dynamicloader""... $ac_c" 1>&6
-echo "configure:3704: checking for --enable-dynamicloader" >&5
+echo "configure:3739: checking for --enable-dynamicloader" >&5
no_cache=0
# Check whether --enable-dynamicloader or --disable-dynamicloader was given.
if test "${enable_dynamicloader+set}" = set; then
echo $ac_n "checking for --enable-longlong""... $ac_c" 1>&6
-echo "configure:3743: checking for --enable-longlong" >&5
+echo "configure:3778: checking for --enable-longlong" >&5
no_cache=0
# Check whether --enable-longlong or --disable-longlong was given.
if test "${enable_longlong+set}" = set; then
echo $ac_n "checking for --enable-geometry""... $ac_c" 1>&6
-echo "configure:3782: checking for --enable-geometry" >&5
+echo "configure:3817: checking for --enable-geometry" >&5
no_cache=0
# Check whether --enable-geometry or --disable-geometry was given.
if test "${enable_geometry+set}" = set; then
echo $ac_n "checking for --enable-log""... $ac_c" 1>&6
-echo "configure:3821: checking for --enable-log" >&5
+echo "configure:3856: checking for --enable-log" >&5
no_cache=0
# Check whether --enable-log or --disable-log was given.
if test "${enable_log+set}" = set; then
echo $ac_n "checking for --enable-streams""... $ac_c" 1>&6
-echo "configure:3860: checking for --enable-streams" >&5
+echo "configure:3895: checking for --enable-streams" >&5
no_cache=0
# Check whether --enable-streams or --disable-streams was given.
if test "${enable_streams+set}" = set; then
echo $ac_n "checking for --enable-file""... $ac_c" 1>&6
-echo "configure:3899: checking for --enable-file" >&5
+echo "configure:3934: checking for --enable-file" >&5
no_cache=0
# Check whether --enable-file or --disable-file was given.
if test "${enable_file+set}" = set; then
echo $ac_n "checking for --enable-ffile""... $ac_c" 1>&6
-echo "configure:3938: checking for --enable-ffile" >&5
+echo "configure:3973: checking for --enable-ffile" >&5
no_cache=0
# Check whether --enable-ffile or --disable-ffile was given.
if test "${enable_ffile+set}" = set; then
echo $ac_n "checking for --enable-textbuf""... $ac_c" 1>&6
-echo "configure:3977: checking for --enable-textbuf" >&5
+echo "configure:4012: checking for --enable-textbuf" >&5
no_cache=0
# Check whether --enable-textbuf or --disable-textbuf was given.
if test "${enable_textbuf+set}" = set; then
echo $ac_n "checking for --enable-textfile""... $ac_c" 1>&6
-echo "configure:4016: checking for --enable-textfile" >&5
+echo "configure:4051: checking for --enable-textfile" >&5
no_cache=0
# Check whether --enable-textfile or --disable-textfile was given.
if test "${enable_textfile+set}" = set; then
echo $ac_n "checking for --enable-fontmap""... $ac_c" 1>&6
-echo "configure:4055: checking for --enable-fontmap" >&5
+echo "configure:4090: checking for --enable-fontmap" >&5
no_cache=0
# Check whether --enable-fontmap or --disable-fontmap was given.
if test "${enable_fontmap+set}" = set; then
echo $ac_n "checking for --enable-unicode""... $ac_c" 1>&6
-echo "configure:4094: checking for --enable-unicode" >&5
+echo "configure:4129: checking for --enable-unicode" >&5
no_cache=0
# Check whether --enable-unicode or --disable-unicode was given.
if test "${enable_unicode+set}" = set; then
echo $ac_n "checking for --enable-mslu""... $ac_c" 1>&6
-echo "configure:4133: checking for --enable-mslu" >&5
+echo "configure:4168: checking for --enable-mslu" >&5
no_cache=0
# Check whether --enable-mslu or --disable-mslu was given.
if test "${enable_mslu+set}" = set; then
echo $ac_n "checking for --enable-wxprintfv""... $ac_c" 1>&6
-echo "configure:4172: checking for --enable-wxprintfv" >&5
+echo "configure:4207: checking for --enable-wxprintfv" >&5
no_cache=0
# Check whether --enable-wxprintfv or --disable-wxprintfv was given.
if test "${enable_wxprintfv+set}" = set; then
echo $ac_n "checking for --enable-std_iostreams""... $ac_c" 1>&6
-echo "configure:4211: checking for --enable-std_iostreams" >&5
+echo "configure:4246: checking for --enable-std_iostreams" >&5
no_cache=0
# Check whether --enable-std_iostreams or --disable-std_iostreams was given.
if test "${enable_std_iostreams+set}" = set; then
echo $ac_n "checking for --enable-filesystem""... $ac_c" 1>&6
-echo "configure:4250: checking for --enable-filesystem" >&5
+echo "configure:4285: checking for --enable-filesystem" >&5
no_cache=0
# Check whether --enable-filesystem or --disable-filesystem was given.
if test "${enable_filesystem+set}" = set; then
echo $ac_n "checking for --enable-fs_inet""... $ac_c" 1>&6
-echo "configure:4289: checking for --enable-fs_inet" >&5
+echo "configure:4324: checking for --enable-fs_inet" >&5
no_cache=0
# Check whether --enable-fs_inet or --disable-fs_inet was given.
if test "${enable_fs_inet+set}" = set; then
echo $ac_n "checking for --enable-fs_zip""... $ac_c" 1>&6
-echo "configure:4328: checking for --enable-fs_zip" >&5
+echo "configure:4363: checking for --enable-fs_zip" >&5
no_cache=0
# Check whether --enable-fs_zip or --disable-fs_zip was given.
if test "${enable_fs_zip+set}" = set; then
echo $ac_n "checking for --enable-zipstream""... $ac_c" 1>&6
-echo "configure:4367: checking for --enable-zipstream" >&5
+echo "configure:4402: checking for --enable-zipstream" >&5
no_cache=0
# Check whether --enable-zipstream or --disable-zipstream was given.
if test "${enable_zipstream+set}" = set; then
echo $ac_n "checking for --enable-catch_segvs""... $ac_c" 1>&6
-echo "configure:4407: checking for --enable-catch_segvs" >&5
+echo "configure:4442: checking for --enable-catch_segvs" >&5
no_cache=0
# Check whether --enable-catch_segvs or --disable-catch_segvs was given.
if test "${enable_catch_segvs+set}" = set; then
echo $ac_n "checking for --enable-snglinst""... $ac_c" 1>&6
-echo "configure:4446: checking for --enable-snglinst" >&5
+echo "configure:4481: checking for --enable-snglinst" >&5
no_cache=0
# Check whether --enable-snglinst or --disable-snglinst was given.
if test "${enable_snglinst+set}" = set; then
echo $ac_n "checking for --enable-mimetype""... $ac_c" 1>&6
-echo "configure:4486: checking for --enable-mimetype" >&5
+echo "configure:4521: checking for --enable-mimetype" >&5
no_cache=0
# Check whether --enable-mimetype or --disable-mimetype was given.
if test "${enable_mimetype+set}" = set; then
echo $ac_n "checking for --enable-system_options""... $ac_c" 1>&6
-echo "configure:4525: checking for --enable-system_options" >&5
+echo "configure:4560: checking for --enable-system_options" >&5
no_cache=0
# Check whether --enable-system_options or --disable-system_options was given.
if test "${enable_system_options+set}" = set; then
echo $ac_n "checking for --enable-url""... $ac_c" 1>&6
-echo "configure:4565: checking for --enable-url" >&5
+echo "configure:4600: checking for --enable-url" >&5
no_cache=0
# Check whether --enable-url or --disable-url was given.
if test "${enable_url+set}" = set; then
echo $ac_n "checking for --enable-protocol""... $ac_c" 1>&6
-echo "configure:4604: checking for --enable-protocol" >&5
+echo "configure:4639: checking for --enable-protocol" >&5
no_cache=0
# Check whether --enable-protocol or --disable-protocol was given.
if test "${enable_protocol+set}" = set; then
echo $ac_n "checking for --enable-protocol_http""... $ac_c" 1>&6
-echo "configure:4643: checking for --enable-protocol_http" >&5
+echo "configure:4678: checking for --enable-protocol_http" >&5
no_cache=0
# Check whether --enable-protocol_http or --disable-protocol_http was given.
if test "${enable_protocol_http+set}" = set; then
echo $ac_n "checking for --enable-protocol_ftp""... $ac_c" 1>&6
-echo "configure:4682: checking for --enable-protocol_ftp" >&5
+echo "configure:4717: checking for --enable-protocol_ftp" >&5
no_cache=0
# Check whether --enable-protocol_ftp or --disable-protocol_ftp was given.
if test "${enable_protocol_ftp+set}" = set; then
echo $ac_n "checking for --enable-protocol_file""... $ac_c" 1>&6
-echo "configure:4721: checking for --enable-protocol_file" >&5
+echo "configure:4756: checking for --enable-protocol_file" >&5
no_cache=0
# Check whether --enable-protocol_file or --disable-protocol_file was given.
if test "${enable_protocol_file+set}" = set; then
echo $ac_n "checking for --enable-threads""... $ac_c" 1>&6
-echo "configure:4763: checking for --enable-threads" >&5
+echo "configure:4798: checking for --enable-threads" >&5
no_cache=0
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
echo $ac_n "checking for --enable-docview""... $ac_c" 1>&6
-echo "configure:4806: checking for --enable-docview" >&5
+echo "configure:4841: checking for --enable-docview" >&5
no_cache=0
# Check whether --enable-docview or --disable-docview was given.
if test "${enable_docview+set}" = set; then
echo $ac_n "checking for --enable-help""... $ac_c" 1>&6
-echo "configure:4845: checking for --enable-help" >&5
+echo "configure:4880: checking for --enable-help" >&5
no_cache=0
# Check whether --enable-help or --disable-help was given.
if test "${enable_help+set}" = set; then
echo $ac_n "checking for --enable-mshtmlhelp""... $ac_c" 1>&6
-echo "configure:4884: checking for --enable-mshtmlhelp" >&5
+echo "configure:4919: checking for --enable-mshtmlhelp" >&5
no_cache=0
# Check whether --enable-mshtmlhelp or --disable-mshtmlhelp was given.
if test "${enable_mshtmlhelp+set}" = set; then
echo $ac_n "checking for --enable-html""... $ac_c" 1>&6
-echo "configure:4923: checking for --enable-html" >&5
+echo "configure:4958: checking for --enable-html" >&5
no_cache=0
# Check whether --enable-html or --disable-html was given.
if test "${enable_html+set}" = set; then
echo $ac_n "checking for --enable-htmlhelp""... $ac_c" 1>&6
-echo "configure:4962: checking for --enable-htmlhelp" >&5
+echo "configure:4997: checking for --enable-htmlhelp" >&5
no_cache=0
# Check whether --enable-htmlhelp or --disable-htmlhelp was given.
if test "${enable_htmlhelp+set}" = set; then
echo $ac_n "checking for --enable-constraints""... $ac_c" 1>&6
-echo "configure:5001: checking for --enable-constraints" >&5
+echo "configure:5036: checking for --enable-constraints" >&5
no_cache=0
# Check whether --enable-constraints or --disable-constraints was given.
if test "${enable_constraints+set}" = set; then
echo $ac_n "checking for --enable-printarch""... $ac_c" 1>&6
-echo "configure:5040: checking for --enable-printarch" >&5
+echo "configure:5075: checking for --enable-printarch" >&5
no_cache=0
# Check whether --enable-printarch or --disable-printarch was given.
if test "${enable_printarch+set}" = set; then
echo $ac_n "checking for --enable-mdi""... $ac_c" 1>&6
-echo "configure:5079: checking for --enable-mdi" >&5
+echo "configure:5114: checking for --enable-mdi" >&5
no_cache=0
# Check whether --enable-mdi or --disable-mdi was given.
if test "${enable_mdi+set}" = set; then
echo $ac_n "checking for --enable-loggui""... $ac_c" 1>&6
-echo "configure:5118: checking for --enable-loggui" >&5
+echo "configure:5153: checking for --enable-loggui" >&5
no_cache=0
# Check whether --enable-loggui or --disable-loggui was given.
if test "${enable_loggui+set}" = set; then
echo $ac_n "checking for --enable-logwin""... $ac_c" 1>&6
-echo "configure:5157: checking for --enable-logwin" >&5
+echo "configure:5192: checking for --enable-logwin" >&5
no_cache=0
# Check whether --enable-logwin or --disable-logwin was given.
if test "${enable_logwin+set}" = set; then
echo $ac_n "checking for --enable-logdialog""... $ac_c" 1>&6
-echo "configure:5196: checking for --enable-logdialog" >&5
+echo "configure:5231: checking for --enable-logdialog" >&5
no_cache=0
# Check whether --enable-logdialog or --disable-logdialog was given.
if test "${enable_logdialog+set}" = set; then
echo $ac_n "checking for --enable-postscript""... $ac_c" 1>&6
-echo "configure:5236: checking for --enable-postscript" >&5
+echo "configure:5271: checking for --enable-postscript" >&5
no_cache=0
# Check whether --enable-postscript or --disable-postscript was given.
if test "${enable_postscript+set}" = set; then
echo $ac_n "checking for --enable-prologio""... $ac_c" 1>&6
-echo "configure:5278: checking for --enable-prologio" >&5
+echo "configure:5313: checking for --enable-prologio" >&5
no_cache=0
# Check whether --enable-prologio or --disable-prologio was given.
if test "${enable_prologio+set}" = set; then
echo $ac_n "checking for --enable-resources""... $ac_c" 1>&6
-echo "configure:5317: checking for --enable-resources" >&5
+echo "configure:5352: checking for --enable-resources" >&5
no_cache=0
# Check whether --enable-resources or --disable-resources was given.
if test "${enable_resources+set}" = set; then
echo $ac_n "checking for --enable-xresources""... $ac_c" 1>&6
-echo "configure:5357: checking for --enable-xresources" >&5
+echo "configure:5392: checking for --enable-xresources" >&5
no_cache=0
# Check whether --enable-xresources or --disable-xresources was given.
if test "${enable_xresources+set}" = set; then
echo $ac_n "checking for --enable-clipboard""... $ac_c" 1>&6
-echo "configure:5398: checking for --enable-clipboard" >&5
+echo "configure:5433: checking for --enable-clipboard" >&5
no_cache=0
# Check whether --enable-clipboard or --disable-clipboard was given.
if test "${enable_clipboard+set}" = set; then
echo $ac_n "checking for --enable-dnd""... $ac_c" 1>&6
-echo "configure:5437: checking for --enable-dnd" >&5
+echo "configure:5472: checking for --enable-dnd" >&5
no_cache=0
# Check whether --enable-dnd or --disable-dnd was given.
if test "${enable_dnd+set}" = set; then
echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
-echo "configure:5476: checking for --enable-metafile" >&5
+echo "configure:5511: checking for --enable-metafile" >&5
no_cache=0
# Check whether --enable-metafile or --disable-metafile was given.
if test "${enable_metafile+set}" = set; then
echo $ac_n "checking for --enable-treelayout""... $ac_c" 1>&6
-echo "configure:5516: checking for --enable-treelayout" >&5
+echo "configure:5551: checking for --enable-treelayout" >&5
no_cache=0
# Check whether --enable-treelayout or --disable-treelayout was given.
if test "${enable_treelayout+set}" = set; then
echo $ac_n "checking for --enable-controls""... $ac_c" 1>&6
-echo "configure:5557: checking for --enable-controls" >&5
+echo "configure:5592: checking for --enable-controls" >&5
no_cache=0
# Check whether --enable-controls or --disable-controls was given.
if test "${enable_controls+set}" = set; then
echo $ac_n "checking for --enable-accel""... $ac_c" 1>&6
-echo "configure:5677: checking for --enable-accel" >&5
+echo "configure:5712: checking for --enable-accel" >&5
no_cache=0
# Check whether --enable-accel or --disable-accel was given.
if test "${enable_accel+set}" = set; then
echo $ac_n "checking for --enable-button""... $ac_c" 1>&6
-echo "configure:5716: checking for --enable-button" >&5
+echo "configure:5751: checking for --enable-button" >&5
no_cache=0
# Check whether --enable-button or --disable-button was given.
if test "${enable_button+set}" = set; then
echo $ac_n "checking for --enable-bmpbutton""... $ac_c" 1>&6
-echo "configure:5755: checking for --enable-bmpbutton" >&5
+echo "configure:5790: checking for --enable-bmpbutton" >&5
no_cache=0
# Check whether --enable-bmpbutton or --disable-bmpbutton was given.
if test "${enable_bmpbutton+set}" = set; then
echo $ac_n "checking for --enable-calendar""... $ac_c" 1>&6
-echo "configure:5794: checking for --enable-calendar" >&5
+echo "configure:5829: checking for --enable-calendar" >&5
no_cache=0
# Check whether --enable-calendar or --disable-calendar was given.
if test "${enable_calendar+set}" = set; then
echo $ac_n "checking for --enable-caret""... $ac_c" 1>&6
-echo "configure:5833: checking for --enable-caret" >&5
+echo "configure:5868: checking for --enable-caret" >&5
no_cache=0
# Check whether --enable-caret or --disable-caret was given.
if test "${enable_caret+set}" = set; then
echo $ac_n "checking for --enable-checkbox""... $ac_c" 1>&6
-echo "configure:5872: checking for --enable-checkbox" >&5
+echo "configure:5907: checking for --enable-checkbox" >&5
no_cache=0
# Check whether --enable-checkbox or --disable-checkbox was given.
if test "${enable_checkbox+set}" = set; then
echo $ac_n "checking for --enable-checklst""... $ac_c" 1>&6
-echo "configure:5911: checking for --enable-checklst" >&5
+echo "configure:5946: checking for --enable-checklst" >&5
no_cache=0
# Check whether --enable-checklst or --disable-checklst was given.
if test "${enable_checklst+set}" = set; then
echo $ac_n "checking for --enable-choice""... $ac_c" 1>&6
-echo "configure:5950: checking for --enable-choice" >&5
+echo "configure:5985: checking for --enable-choice" >&5
no_cache=0
# Check whether --enable-choice or --disable-choice was given.
if test "${enable_choice+set}" = set; then
echo $ac_n "checking for --enable-combobox""... $ac_c" 1>&6
-echo "configure:5989: checking for --enable-combobox" >&5
+echo "configure:6024: checking for --enable-combobox" >&5
no_cache=0
# Check whether --enable-combobox or --disable-combobox was given.
if test "${enable_combobox+set}" = set; then
echo $ac_n "checking for --enable-gauge""... $ac_c" 1>&6
-echo "configure:6028: checking for --enable-gauge" >&5
+echo "configure:6063: checking for --enable-gauge" >&5
no_cache=0
# Check whether --enable-gauge or --disable-gauge was given.
if test "${enable_gauge+set}" = set; then
echo $ac_n "checking for --enable-grid""... $ac_c" 1>&6
-echo "configure:6067: checking for --enable-grid" >&5
+echo "configure:6102: checking for --enable-grid" >&5
no_cache=0
# Check whether --enable-grid or --disable-grid was given.
if test "${enable_grid+set}" = set; then
echo $ac_n "checking for --enable-newgrid""... $ac_c" 1>&6
-echo "configure:6106: checking for --enable-newgrid" >&5
+echo "configure:6141: checking for --enable-newgrid" >&5
no_cache=0
# Check whether --enable-newgrid or --disable-newgrid was given.
if test "${enable_newgrid+set}" = set; then
echo $ac_n "checking for --enable-imaglist""... $ac_c" 1>&6
-echo "configure:6145: checking for --enable-imaglist" >&5
+echo "configure:6180: checking for --enable-imaglist" >&5
no_cache=0
# Check whether --enable-imaglist or --disable-imaglist was given.
if test "${enable_imaglist+set}" = set; then
echo $ac_n "checking for --enable-listbox""... $ac_c" 1>&6
-echo "configure:6184: checking for --enable-listbox" >&5
+echo "configure:6219: checking for --enable-listbox" >&5
no_cache=0
# Check whether --enable-listbox or --disable-listbox was given.
if test "${enable_listbox+set}" = set; then
echo $ac_n "checking for --enable-listctrl""... $ac_c" 1>&6
-echo "configure:6223: checking for --enable-listctrl" >&5
+echo "configure:6258: checking for --enable-listctrl" >&5
no_cache=0
# Check whether --enable-listctrl or --disable-listctrl was given.
if test "${enable_listctrl+set}" = set; then
echo $ac_n "checking for --enable-notebook""... $ac_c" 1>&6
-echo "configure:6262: checking for --enable-notebook" >&5
+echo "configure:6297: checking for --enable-notebook" >&5
no_cache=0
# Check whether --enable-notebook or --disable-notebook was given.
if test "${enable_notebook+set}" = set; then
echo $ac_n "checking for --enable-propsheet""... $ac_c" 1>&6
-echo "configure:6301: checking for --enable-propsheet" >&5
+echo "configure:6336: checking for --enable-propsheet" >&5
no_cache=0
# Check whether --enable-propsheet or --disable-propsheet was given.
if test "${enable_propsheet+set}" = set; then
echo $ac_n "checking for --enable-radiobox""... $ac_c" 1>&6
-echo "configure:6340: checking for --enable-radiobox" >&5
+echo "configure:6375: checking for --enable-radiobox" >&5
no_cache=0
# Check whether --enable-radiobox or --disable-radiobox was given.
if test "${enable_radiobox+set}" = set; then
echo $ac_n "checking for --enable-radiobtn""... $ac_c" 1>&6
-echo "configure:6379: checking for --enable-radiobtn" >&5
+echo "configure:6414: checking for --enable-radiobtn" >&5
no_cache=0
# Check whether --enable-radiobtn or --disable-radiobtn was given.
if test "${enable_radiobtn+set}" = set; then
echo $ac_n "checking for --enable-sash""... $ac_c" 1>&6
-echo "configure:6418: checking for --enable-sash" >&5
+echo "configure:6453: checking for --enable-sash" >&5
no_cache=0
# Check whether --enable-sash or --disable-sash was given.
if test "${enable_sash+set}" = set; then
echo $ac_n "checking for --enable-scrollbar""... $ac_c" 1>&6
-echo "configure:6457: checking for --enable-scrollbar" >&5
+echo "configure:6492: checking for --enable-scrollbar" >&5
no_cache=0
# Check whether --enable-scrollbar or --disable-scrollbar was given.
if test "${enable_scrollbar+set}" = set; then
echo $ac_n "checking for --enable-slider""... $ac_c" 1>&6
-echo "configure:6496: checking for --enable-slider" >&5
+echo "configure:6531: checking for --enable-slider" >&5
no_cache=0
# Check whether --enable-slider or --disable-slider was given.
if test "${enable_slider+set}" = set; then
echo $ac_n "checking for --enable-spinbtn""... $ac_c" 1>&6
-echo "configure:6535: checking for --enable-spinbtn" >&5
+echo "configure:6570: checking for --enable-spinbtn" >&5
no_cache=0
# Check whether --enable-spinbtn or --disable-spinbtn was given.
if test "${enable_spinbtn+set}" = set; then
echo $ac_n "checking for --enable-spinctrl""... $ac_c" 1>&6
-echo "configure:6574: checking for --enable-spinctrl" >&5
+echo "configure:6609: checking for --enable-spinctrl" >&5
no_cache=0
# Check whether --enable-spinctrl or --disable-spinctrl was given.
if test "${enable_spinctrl+set}" = set; then
echo $ac_n "checking for --enable-splitter""... $ac_c" 1>&6
-echo "configure:6613: checking for --enable-splitter" >&5
+echo "configure:6648: checking for --enable-splitter" >&5
no_cache=0
# Check whether --enable-splitter or --disable-splitter was given.
if test "${enable_splitter+set}" = set; then
echo $ac_n "checking for --enable-statbmp""... $ac_c" 1>&6
-echo "configure:6652: checking for --enable-statbmp" >&5
+echo "configure:6687: checking for --enable-statbmp" >&5
no_cache=0
# Check whether --enable-statbmp or --disable-statbmp was given.
if test "${enable_statbmp+set}" = set; then
echo $ac_n "checking for --enable-statbox""... $ac_c" 1>&6
-echo "configure:6691: checking for --enable-statbox" >&5
+echo "configure:6726: checking for --enable-statbox" >&5
no_cache=0
# Check whether --enable-statbox or --disable-statbox was given.
if test "${enable_statbox+set}" = set; then
echo $ac_n "checking for --enable-statline""... $ac_c" 1>&6
-echo "configure:6730: checking for --enable-statline" >&5
+echo "configure:6765: checking for --enable-statline" >&5
no_cache=0
# Check whether --enable-statline or --disable-statline was given.
if test "${enable_statline+set}" = set; then
echo $ac_n "checking for --enable-stattext""... $ac_c" 1>&6
-echo "configure:6769: checking for --enable-stattext" >&5
+echo "configure:6804: checking for --enable-stattext" >&5
no_cache=0
# Check whether --enable-stattext or --disable-stattext was given.
if test "${enable_stattext+set}" = set; then
echo $ac_n "checking for --enable-statusbar""... $ac_c" 1>&6
-echo "configure:6808: checking for --enable-statusbar" >&5
+echo "configure:6843: checking for --enable-statusbar" >&5
no_cache=0
# Check whether --enable-statusbar or --disable-statusbar was given.
if test "${enable_statusbar+set}" = set; then
echo $ac_n "checking for --enable-tabdialog""... $ac_c" 1>&6
-echo "configure:6847: checking for --enable-tabdialog" >&5
+echo "configure:6882: checking for --enable-tabdialog" >&5
no_cache=0
# Check whether --enable-tabdialog or --disable-tabdialog was given.
if test "${enable_tabdialog+set}" = set; then
echo $ac_n "checking for --enable-textctrl""... $ac_c" 1>&6
-echo "configure:6886: checking for --enable-textctrl" >&5
+echo "configure:6921: checking for --enable-textctrl" >&5
no_cache=0
# Check whether --enable-textctrl or --disable-textctrl was given.
if test "${enable_textctrl+set}" = set; then
echo $ac_n "checking for --enable-togglebtn""... $ac_c" 1>&6
-echo "configure:6925: checking for --enable-togglebtn" >&5
+echo "configure:6960: checking for --enable-togglebtn" >&5
no_cache=0
# Check whether --enable-togglebtn or --disable-togglebtn was given.
if test "${enable_togglebtn+set}" = set; then
echo $ac_n "checking for --enable-toolbar""... $ac_c" 1>&6
-echo "configure:6964: checking for --enable-toolbar" >&5
+echo "configure:6999: checking for --enable-toolbar" >&5
no_cache=0
# Check whether --enable-toolbar or --disable-toolbar was given.
if test "${enable_toolbar+set}" = set; then
echo $ac_n "checking for --enable-tbarnative""... $ac_c" 1>&6
-echo "configure:7003: checking for --enable-tbarnative" >&5
+echo "configure:7038: checking for --enable-tbarnative" >&5
no_cache=0
# Check whether --enable-tbarnative or --disable-tbarnative was given.
if test "${enable_tbarnative+set}" = set; then
echo $ac_n "checking for --enable-tbarsmpl""... $ac_c" 1>&6
-echo "configure:7042: checking for --enable-tbarsmpl" >&5
+echo "configure:7077: checking for --enable-tbarsmpl" >&5
no_cache=0
# Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
if test "${enable_tbarsmpl+set}" = set; then
echo $ac_n "checking for --enable-treectrl""... $ac_c" 1>&6
-echo "configure:7081: checking for --enable-treectrl" >&5
+echo "configure:7116: checking for --enable-treectrl" >&5
no_cache=0
# Check whether --enable-treectrl or --disable-treectrl was given.
if test "${enable_treectrl+set}" = set; then
echo $ac_n "checking for --enable-tipwindow""... $ac_c" 1>&6
-echo "configure:7120: checking for --enable-tipwindow" >&5
+echo "configure:7155: checking for --enable-tipwindow" >&5
no_cache=0
# Check whether --enable-tipwindow or --disable-tipwindow was given.
if test "${enable_tipwindow+set}" = set; then
echo $ac_n "checking for --enable-popupwin""... $ac_c" 1>&6
-echo "configure:7159: checking for --enable-popupwin" >&5
+echo "configure:7194: checking for --enable-popupwin" >&5
no_cache=0
# Check whether --enable-popupwin or --disable-popupwin was given.
if test "${enable_popupwin+set}" = set; then
echo $ac_n "checking for --enable-commondlg""... $ac_c" 1>&6
-echo "configure:7200: checking for --enable-commondlg" >&5
+echo "configure:7235: checking for --enable-commondlg" >&5
no_cache=0
# Check whether --enable-commondlg or --disable-commondlg was given.
if test "${enable_commondlg+set}" = set; then
echo $ac_n "checking for --enable-choicedlg""... $ac_c" 1>&6
-echo "configure:7239: checking for --enable-choicedlg" >&5
+echo "configure:7274: checking for --enable-choicedlg" >&5
no_cache=0
# Check whether --enable-choicedlg or --disable-choicedlg was given.
if test "${enable_choicedlg+set}" = set; then
echo $ac_n "checking for --enable-coldlg""... $ac_c" 1>&6
-echo "configure:7278: checking for --enable-coldlg" >&5
+echo "configure:7313: checking for --enable-coldlg" >&5
no_cache=0
# Check whether --enable-coldlg or --disable-coldlg was given.
if test "${enable_coldlg+set}" = set; then
echo $ac_n "checking for --enable-filedlg""... $ac_c" 1>&6
-echo "configure:7317: checking for --enable-filedlg" >&5
+echo "configure:7352: checking for --enable-filedlg" >&5
no_cache=0
# Check whether --enable-filedlg or --disable-filedlg was given.
if test "${enable_filedlg+set}" = set; then
echo $ac_n "checking for --enable-finddlg""... $ac_c" 1>&6
-echo "configure:7356: checking for --enable-finddlg" >&5
+echo "configure:7391: checking for --enable-finddlg" >&5
no_cache=0
# Check whether --enable-finddlg or --disable-finddlg was given.
if test "${enable_finddlg+set}" = set; then
echo $ac_n "checking for --enable-fontdlg""... $ac_c" 1>&6
-echo "configure:7395: checking for --enable-fontdlg" >&5
+echo "configure:7430: checking for --enable-fontdlg" >&5
no_cache=0
# Check whether --enable-fontdlg or --disable-fontdlg was given.
if test "${enable_fontdlg+set}" = set; then
echo $ac_n "checking for --enable-dirdlg""... $ac_c" 1>&6
-echo "configure:7434: checking for --enable-dirdlg" >&5
+echo "configure:7469: checking for --enable-dirdlg" >&5
no_cache=0
# Check whether --enable-dirdlg or --disable-dirdlg was given.
if test "${enable_dirdlg+set}" = set; then
echo $ac_n "checking for --enable-msgdlg""... $ac_c" 1>&6
-echo "configure:7473: checking for --enable-msgdlg" >&5
+echo "configure:7508: checking for --enable-msgdlg" >&5
no_cache=0
# Check whether --enable-msgdlg or --disable-msgdlg was given.
if test "${enable_msgdlg+set}" = set; then
echo $ac_n "checking for --enable-numberdlg""... $ac_c" 1>&6
-echo "configure:7512: checking for --enable-numberdlg" >&5
+echo "configure:7547: checking for --enable-numberdlg" >&5
no_cache=0
# Check whether --enable-numberdlg or --disable-numberdlg was given.
if test "${enable_numberdlg+set}" = set; then
echo $ac_n "checking for --enable-splash""... $ac_c" 1>&6
-echo "configure:7551: checking for --enable-splash" >&5
+echo "configure:7586: checking for --enable-splash" >&5
no_cache=0
# Check whether --enable-splash or --disable-splash was given.
if test "${enable_splash+set}" = set; then
echo $ac_n "checking for --enable-textdlg""... $ac_c" 1>&6
-echo "configure:7590: checking for --enable-textdlg" >&5
+echo "configure:7625: checking for --enable-textdlg" >&5
no_cache=0
# Check whether --enable-textdlg or --disable-textdlg was given.
if test "${enable_textdlg+set}" = set; then
echo $ac_n "checking for --enable-tipdlg""... $ac_c" 1>&6
-echo "configure:7629: checking for --enable-tipdlg" >&5
+echo "configure:7664: checking for --enable-tipdlg" >&5
no_cache=0
# Check whether --enable-tipdlg or --disable-tipdlg was given.
if test "${enable_tipdlg+set}" = set; then
echo $ac_n "checking for --enable-progressdlg""... $ac_c" 1>&6
-echo "configure:7668: checking for --enable-progressdlg" >&5
+echo "configure:7703: checking for --enable-progressdlg" >&5
no_cache=0
# Check whether --enable-progressdlg or --disable-progressdlg was given.
if test "${enable_progressdlg+set}" = set; then
echo $ac_n "checking for --enable-wizarddlg""... $ac_c" 1>&6
-echo "configure:7707: checking for --enable-wizarddlg" >&5
+echo "configure:7742: checking for --enable-wizarddlg" >&5
no_cache=0
# Check whether --enable-wizarddlg or --disable-wizarddlg was given.
if test "${enable_wizarddlg+set}" = set; then
echo $ac_n "checking for --enable-menus""... $ac_c" 1>&6
-echo "configure:7748: checking for --enable-menus" >&5
+echo "configure:7783: checking for --enable-menus" >&5
no_cache=0
# Check whether --enable-menus or --disable-menus was given.
if test "${enable_menus+set}" = set; then
echo $ac_n "checking for --enable-miniframe""... $ac_c" 1>&6
-echo "configure:7787: checking for --enable-miniframe" >&5
+echo "configure:7822: checking for --enable-miniframe" >&5
no_cache=0
# Check whether --enable-miniframe or --disable-miniframe was given.
if test "${enable_miniframe+set}" = set; then
echo $ac_n "checking for --enable-tooltips""... $ac_c" 1>&6
-echo "configure:7826: checking for --enable-tooltips" >&5
+echo "configure:7861: checking for --enable-tooltips" >&5
no_cache=0
# Check whether --enable-tooltips or --disable-tooltips was given.
if test "${enable_tooltips+set}" = set; then
echo $ac_n "checking for --enable-splines""... $ac_c" 1>&6
-echo "configure:7865: checking for --enable-splines" >&5
+echo "configure:7900: checking for --enable-splines" >&5
no_cache=0
# Check whether --enable-splines or --disable-splines was given.
if test "${enable_splines+set}" = set; then
echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6
-echo "configure:7904: checking for --enable-validators" >&5
+echo "configure:7939: checking for --enable-validators" >&5
no_cache=0
# Check whether --enable-validators or --disable-validators was given.
if test "${enable_validators+set}" = set; then
echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6
-echo "configure:7943: checking for --enable-busyinfo" >&5
+echo "configure:7978: checking for --enable-busyinfo" >&5
no_cache=0
# Check whether --enable-busyinfo or --disable-busyinfo was given.
if test "${enable_busyinfo+set}" = set; then
echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6
-echo "configure:7982: checking for --enable-joystick" >&5
+echo "configure:8017: checking for --enable-joystick" >&5
no_cache=0
# Check whether --enable-joystick or --disable-joystick was given.
if test "${enable_joystick+set}" = set; then
echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
-echo "configure:8021: checking for --enable-metafile" >&5
+echo "configure:8056: checking for --enable-metafile" >&5
no_cache=0
# Check whether --enable-metafile or --disable-metafile was given.
if test "${enable_metafile+set}" = set; then
echo $ac_n "checking for --enable-dragimage""... $ac_c" 1>&6
-echo "configure:8060: checking for --enable-dragimage" >&5
+echo "configure:8095: checking for --enable-dragimage" >&5
no_cache=0
# Check whether --enable-dragimage or --disable-dragimage was given.
if test "${enable_dragimage+set}" = set; then
echo $ac_n "checking for --enable-palette""... $ac_c" 1>&6
-echo "configure:8101: checking for --enable-palette" >&5
+echo "configure:8136: checking for --enable-palette" >&5
no_cache=0
# Check whether --enable-palette or --disable-palette was given.
if test "${enable_palette+set}" = set; then
echo $ac_n "checking for --enable-image""... $ac_c" 1>&6
-echo "configure:8140: checking for --enable-image" >&5
+echo "configure:8175: checking for --enable-image" >&5
no_cache=0
# Check whether --enable-image or --disable-image was given.
if test "${enable_image+set}" = set; then
echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6
-echo "configure:8179: checking for --enable-gif" >&5
+echo "configure:8214: checking for --enable-gif" >&5
no_cache=0
# Check whether --enable-gif or --disable-gif was given.
if test "${enable_gif+set}" = set; then
echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6
-echo "configure:8218: checking for --enable-pcx" >&5
+echo "configure:8253: checking for --enable-pcx" >&5
no_cache=0
# Check whether --enable-pcx or --disable-pcx was given.
if test "${enable_pcx+set}" = set; then
echo $ac_n "checking for --enable-iff""... $ac_c" 1>&6
-echo "configure:8257: checking for --enable-iff" >&5
+echo "configure:8292: checking for --enable-iff" >&5
no_cache=0
# Check whether --enable-iff or --disable-iff was given.
if test "${enable_iff+set}" = set; then
echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
-echo "configure:8296: checking for --enable-pnm" >&5
+echo "configure:8331: checking for --enable-pnm" >&5
no_cache=0
# Check whether --enable-pnm or --disable-pnm was given.
if test "${enable_pnm+set}" = set; then
echo $ac_n "checking for --enable-xpm""... $ac_c" 1>&6
-echo "configure:8335: checking for --enable-xpm" >&5
+echo "configure:8370: checking for --enable-xpm" >&5
no_cache=0
# Check whether --enable-xpm or --disable-xpm was given.
if test "${enable_xpm+set}" = set; then
echo $ac_n "checking for --enable-ico_cur""... $ac_c" 1>&6
-echo "configure:8374: checking for --enable-ico_cur" >&5
+echo "configure:8409: checking for --enable-ico_cur" >&5
no_cache=0
# Check whether --enable-ico_cur or --disable-ico_cur was given.
if test "${enable_ico_cur+set}" = set; then
case "${host}" in
*-pc-os2_emx | *-pc-os2-emx )
- LEX_STEM="lexyy"
+ PATH_IFS=';'
+ LEX_STEM="lexyy"
;;
*)
PATH_IFS=':'
echo $ac_n "checking for toolkit""... $ac_c" 1>&6
-echo "configure:8432: checking for toolkit" >&5
+echo "configure:8468: checking for toolkit" >&5
if test "$wxUSE_GUI" = "yes"; then
1)
;;
0)
- { echo "configure: error: Please specify a toolkit - cannot determine the default for ${host}" 1>&2; exit 1; }
+ { echo "configure: error: Please specify a toolkit -- cannot determine the default for ${host}" 1>&2; exit 1; }
;;
*)
- { echo "configure: error: Please specify at most one toolkit (may be some are cached?)" 1>&2; exit 1; }
+ { echo "configure: error: Please specify at most one toolkit (maybe some are cached in configarg.cache?)" 1>&2; exit 1; }
esac
for toolkit in `echo $ALL_TOOLKITS`; do
echo "$ac_t""base ($host_alias hosted) only" 1>&6
fi
+case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ LIBS="$LIBS -lstdcpp"
+ if test "$wxUSE_MOTIF" = 1 -o "$wxUSE_GTK" = 1 -o "$wxUSE_X11" = 1; then
+ echo $ac_n "checking for drand48 in -lcExt""... $ac_c" 1>&6
+echo "configure:8535: checking for drand48 in -lcExt" >&5
+ac_lib_var=`echo cExt'_'drand48 | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcExt $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 8543 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char drand48();
+
+int main() {
+drand48()
+; return 0; }
+EOF
+if { (eval echo configure:8554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lcExt"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ RESPROGRAMOBJ="\${top_srcdir}/include/wx/os2/wx.res"
+ fi
+ ;;
+esac
wants_win32=0
doesnt_want_win32=0
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8620: checking for $ac_word" >&5
+echo "configure:8705: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8650: checking for $ac_word" >&5
+echo "configure:8735: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8701: checking for $ac_word" >&5
+echo "configure:8786: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:8733: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:8818: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 8744 "configure"
+#line 8829 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:8749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:8775: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:8860: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:8780: checking whether we are using GNU C" >&5
+echo "configure:8865: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8789: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:8808: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:8893: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:8841: checking how to run the C preprocessor" >&5
+echo "configure:8926: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 8856 "configure"
+#line 8941 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8862: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 8873 "configure"
+#line 8958 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8879: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 8890 "configure"
+#line 8975 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8896: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8981: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:8922: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:9007: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
-#line 8928 "configure"
+#line 9013 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
-#line 8946 "configure"
+#line 9031 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8983: checking for $ac_word" >&5
+echo "configure:9068: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:9015: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:9100: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 9026 "configure"
+#line 9111 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
-if { (eval echo configure:9031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:9057: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:9142: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:9062: checking whether we are using GNU C++" >&5
+echo "configure:9147: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9156: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:9090: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:9175: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9133: checking for $ac_word" >&5
+echo "configure:9218: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9164: checking for $ac_word" >&5
+echo "configure:9249: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:9204: checking for a BSD compatible install" >&5
+echo "configure:9289: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9278: checking for $ac_word" >&5
+echo "configure:9363: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking if make is GNU make""... $ac_c" 1>&6
-echo "configure:9307: checking if make is GNU make" >&5
+echo "configure:9392: checking if make is GNU make" >&5
if eval "test \"`echo '$''{'wx_cv_prog_makeisgnu'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$wx_cv_prog_makeisgnu" != "xyes"; then
echo $ac_n "checking if make supports VPATH""... $ac_c" 1>&6
-echo "configure:9333: checking if make supports VPATH" >&5
+echo "configure:9418: checking if make supports VPATH" >&5
if eval "test \"`echo '$''{'wx_cv_prog_makevpath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9380: checking for $ac_word" >&5
+echo "configure:9465: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9414: checking for $ac_word" >&5
+echo "configure:9499: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:9448: checking for yywrap in -l$ac_lib" >&5
+echo "configure:9533: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9456 "configure"
+#line 9541 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:9467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:9491: checking whether ln -s works" >&5
+echo "configure:9576: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9518: checking for $ac_hdr" >&5
+echo "configure:9603: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9523 "configure"
+#line 9608 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9528: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9613: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9560: checking for $ac_hdr" >&5
+echo "configure:9645: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9565 "configure"
+#line 9650 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9570: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9655: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9600: checking for $ac_hdr" >&5
+echo "configure:9685: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9605 "configure"
+#line 9690 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9610: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9640: checking for $ac_hdr" >&5
+echo "configure:9725: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9645 "configure"
+#line 9730 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9680: checking for $ac_hdr" >&5
+echo "configure:9765: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9685 "configure"
+#line 9770 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9690: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9722: checking for $ac_hdr" >&5
+echo "configure:9807: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9727 "configure"
+#line 9812 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9817: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
-
for ac_hdr in fnmatch.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9765: checking for $ac_hdr" >&5
+echo "configure:9849: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9770 "configure"
+#line 9854 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in fnmatch
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:9806: checking for $ac_func" >&5
+echo "configure:9890: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9811 "configure"
+#line 9895 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:9834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9864: checking for $ac_hdr" >&5
+echo "configure:9948: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9869 "configure"
+#line 9953 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9907: checking for $ac_hdr" >&5
+echo "configure:9991: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9912 "configure"
+#line 9996 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9917: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10001: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:9948: checking for working const" >&5
+echo "configure:10032: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9953 "configure"
+#line 10037 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:10002: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10086: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:10023: checking for inline" >&5
+echo "configure:10107: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 10030 "configure"
+#line 10114 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:10037: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10121: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:10064: checking size of char" >&5
+echo "configure:10148: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_char=1
else
cat > conftest.$ac_ext <<EOF
-#line 10072 "configure"
+#line 10156 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10083: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_char=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:10103: checking size of short" >&5
+echo "configure:10188: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_short=2
else
cat > conftest.$ac_ext <<EOF
-#line 10111 "configure"
+#line 10196 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:10142: checking size of void *" >&5
+echo "configure:10228: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_void_p=4
else
cat > conftest.$ac_ext <<EOF
-#line 10150 "configure"
+#line 10236 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_void_p=`cat conftestval`
else
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:10181: checking size of int" >&5
+echo "configure:10268: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int=4
else
cat > conftest.$ac_ext <<EOF
-#line 10189 "configure"
+#line 10276 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:10220: checking size of long" >&5
+echo "configure:10308: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 10228 "configure"
+#line 10316 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
case "${host}" in
arm-*-linux* )
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:10262: checking size of long long" >&5
+echo "configure:10351: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 10270 "configure"
+#line 10359 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
;;
* )
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:10303: checking size of long long" >&5
+echo "configure:10393: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=0
else
cat > conftest.$ac_ext <<EOF
-#line 10311 "configure"
+#line 10401 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10322: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
esac
echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6
-echo "configure:10344: checking size of wchar_t" >&5
+echo "configure:10435: checking size of wchar_t" >&5
if eval "test \"`echo '$''{'wx_cv_sizeof_wchar_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
else
cat > conftest.$ac_ext <<EOF
-#line 10354 "configure"
+#line 10445 "configure"
#include "confdefs.h"
#ifdef HAVE_WCHAR_H
}
EOF
-if { (eval echo configure:10376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
wx_cv_sizeof_wchar_t=`cat conftestval`
else
wx_largefile=no
echo $ac_n "checking for _FILE_OFFSET_BITS value needed for large files""... $ac_c" 1>&6
-echo "configure:10408: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+echo "configure:10499: checking for _FILE_OFFSET_BITS value needed for large files" >&5
if eval "test \"`echo '$''{'ac_cv_sys_file_offset_bits'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10414 "configure"
+#line 10505 "configure"
#include "confdefs.h"
#define _FILE_OFFSET_BITS 64
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:10425: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10516: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sys_file_offset_bits=64
else
if test "x$wx_largefile" != "xyes"; then
echo $ac_n "checking for _LARGE_FILES value needed for large files""... $ac_c" 1>&6
-echo "configure:10452: checking for _LARGE_FILES value needed for large files" >&5
+echo "configure:10543: checking for _LARGE_FILES value needed for large files" >&5
if eval "test \"`echo '$''{'ac_cv_sys_large_files'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10458 "configure"
+#line 10549 "configure"
#include "confdefs.h"
#define _LARGE_FILES 1
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:10469: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10560: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sys_large_files=1
else
fi
echo $ac_n "checking if large file support is available""... $ac_c" 1>&6
-echo "configure:10496: checking if large file support is available" >&5
+echo "configure:10587: checking if large file support is available" >&5
if test "x$wx_largefile" = "xyes"; then
cat >> confdefs.h <<\EOF
#define HAVE_LARGEFILE_SUPPORT 1
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:10508: checking whether byte ordering is bigendian" >&5
+echo "configure:10599: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 10515 "configure"
+#line 10606 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:10526: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10617: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 10530 "configure"
+#line 10621 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:10541: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10632: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
ac_cv_c_bigendian=unknown
else
cat > conftest.$ac_ext <<EOF
-#line 10561 "configure"
+#line 10652 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:10574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:10602: checking how to run the C++ preprocessor" >&5
+echo "configure:10693: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 10615 "configure"
+#line 10706 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10620: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10664: checking for $ac_hdr" >&5
+echo "configure:10755: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10669 "configure"
+#line 10760 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10674: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if C++ compiler supports bool""... $ac_c" 1>&6
-echo "configure:10722: checking if C++ compiler supports bool" >&5
+echo "configure:10813: checking if C++ compiler supports bool" >&5
if eval "test \"`echo '$''{'wx_cv_cpp_bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10737 "configure"
+#line 10828 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:10749: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10840: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_cpp_bool=yes
echo $ac_n "checking if C++ compiler supports the explicit keyword""... $ac_c" 1>&6
-echo "configure:10787: checking if C++ compiler supports the explicit keyword" >&5
+echo "configure:10878: checking if C++ compiler supports the explicit keyword" >&5
if eval "test \"`echo '$''{'wx_cv_explicit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10802 "configure"
+#line 10893 "configure"
#include "confdefs.h"
class Foo { public: explicit Foo(int) {} };
; return 0; }
EOF
-if { (eval echo configure:10813: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10904: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 10817 "configure"
+#line 10908 "configure"
#include "confdefs.h"
class Foo { public: explicit Foo(int) {} };
; return 0; }
EOF
-if { (eval echo configure:10830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10921: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_explicit=no
else
if test "$USE_LINUX" = 1; then
echo $ac_n "checking for glibc 2.1 or later""... $ac_c" 1>&6
-echo "configure:10992: checking for glibc 2.1 or later" >&5
+echo "configure:11083: checking for glibc 2.1 or later" >&5
if eval "test \"`echo '$''{'wx_cv_lib_glibc21'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10998 "configure"
+#line 11089 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:11009: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_lib_glibc21=yes
fi
fi
+if test "x$wx_cv_lib_glibc21" = "xyes"; then
+ if test "$wxUSE_UNICODE" = "yes" -o "$wxUSE_THREADS" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define _GNU_SOURCE 1
+EOF
+
+ fi
+fi
+
REGEX_INCLUDE=
if test "$wxUSE_REGEX" = "sys" -o "$wxUSE_REGEX" = "yes" ; then
ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for regex.h""... $ac_c" 1>&6
-echo "configure:11048: checking for regex.h" >&5
+echo "configure:11148: checking for regex.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11053 "configure"
+#line 11153 "configure"
#include "confdefs.h"
#include <regex.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11058: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11158: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in regcomp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:11077: checking for $ac_func" >&5
+echo "configure:11177: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11082 "configure"
+#line 11182 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:11105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$wxUSE_ZLIB" = "sys" -o "$wxUSE_ZLIB" = "yes" ; then
ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for zlib.h""... $ac_c" 1>&6
-echo "configure:11163: checking for zlib.h" >&5
+echo "configure:11263: checking for zlib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11168 "configure"
+#line 11268 "configure"
#include "confdefs.h"
#include <zlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11173: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11273: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:11190: checking for deflate in -lz" >&5
+echo "configure:11290: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11198 "configure"
+#line 11298 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:11209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_LIBPNG" = "sys" -o "$wxUSE_LIBPNG" = "yes" ; then
ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for png.h""... $ac_c" 1>&6
-echo "configure:11274: checking for png.h" >&5
+echo "configure:11374: checking for png.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11279 "configure"
+#line 11379 "configure"
#include "confdefs.h"
#include <png.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11384: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6
-echo "configure:11301: checking for png_check_sig in -lpng" >&5
+echo "configure:11401: checking for png_check_sig in -lpng" >&5
ac_lib_var=`echo png'_'png_check_sig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpng -lz -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11309 "configure"
+#line 11409 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
png_check_sig()
; return 0; }
EOF
-if { (eval echo configure:11320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MGL" != 1 ; then
if test "$wxUSE_LIBJPEG" = "sys" -o "$wxUSE_LIBJPEG" = "yes" ; then
echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
-echo "configure:11383: checking for jpeglib.h" >&5
+echo "configure:11483: checking for jpeglib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_jpeglib_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11388 "configure"
+#line 11488 "configure"
#include "confdefs.h"
#undef HAVE_STDLIB_H
; return 0; }
EOF
-if { (eval echo configure:11400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11500: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_jpeglib_h=yes
else
if test "$ac_cv_header_jpeglib_h" = "yes"; then
echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6
-echo "configure:11418: checking for jpeg_read_header in -ljpeg" >&5
+echo "configure:11518: checking for jpeg_read_header in -ljpeg" >&5
ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ljpeg $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11426 "configure"
+#line 11526 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jpeg_read_header()
; return 0; }
EOF
-if { (eval echo configure:11437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_LIBTIFF" = "sys" -o "$wxUSE_LIBTIFF" = "yes" ; then
ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
-echo "configure:11489: checking for tiffio.h" >&5
+echo "configure:11589: checking for tiffio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11494 "configure"
+#line 11594 "configure"
#include "confdefs.h"
#include <tiffio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11499: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11599: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6
-echo "configure:11516: checking for TIFFError in -ltiff" >&5
+echo "configure:11616: checking for TIFFError in -ltiff" >&5
ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltiff -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11524 "configure"
+#line 11624 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
TIFFError()
; return 0; }
EOF
-if { (eval echo configure:11535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:11590: checking for $ac_hdr" >&5
+echo "configure:11690: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11595 "configure"
+#line 11695 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11600: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11700: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for windows.h""... $ac_c" 1>&6
-echo "configure:11628: checking for windows.h" >&5
+echo "configure:11728: checking for windows.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11633 "configure"
+#line 11733 "configure"
#include "confdefs.h"
#include <windows.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11738: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if w32api has good enough MSIE support""... $ac_c" 1>&6
-echo "configure:11664: checking if w32api has good enough MSIE support" >&5
+echo "configure:11764: checking if w32api has good enough MSIE support" >&5
if eval "test \"`echo '$''{'wx_cv_w32api_win32_ie'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11670 "configure"
+#line 11770 "configure"
#include "confdefs.h"
#include <w32api.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:11686: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11786: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_w32api_win32_ie=yes
if test "$wxUSE_GTK" = 1; then
echo $ac_n "checking for GTK+ version""... $ac_c" 1>&6
-echo "configure:11745: checking for GTK+ version" >&5
+echo "configure:11845: checking for GTK+ version" >&5
gtk_version_cached=1
if eval "test \"`echo '$''{'wx_cv_lib_gtk'+set}'`\" = set"; then
# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:11786: checking for $ac_word" >&5
+echo "configure:11886: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=2.0.0
echo $ac_n "checking for GTK+ - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:11834: checking for GTK+ - version >= $min_gtk_version" >&5
+echo "configure:11934: checking for GTK+ - version >= $min_gtk_version" >&5
if test x$PKG_CONFIG != xno ; then
## don't try to run the test against uninstalled libtool libs
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 11869 "configure"
+#line 11969 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:11944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
:
else
echo "*** Could not run GTK+ test program, checking why..."
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11976 "configure"
+#line 12078 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:11986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12088: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GTK+ was incorrectly installed"
- echo "*** or that you have moved GTK+ since it was installed. In the latter case, you"
- echo "*** may want to edit the pkg-config script: $PKG_CONFIG"
+ echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."
fi
rm -f conftest*
CFLAGS="$ac_save_CFLAGS"
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:12072: checking for $ac_word" >&5
+echo "configure:12172: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.7
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:12107: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:12207: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 12130 "configure"
+#line 12230 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:12208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12242 "configure"
+#line 12342 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:12252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:12343: checking for $ac_word" >&5
+echo "configure:12443: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.3
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:12378: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:12478: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 12401 "configure"
+#line 12501 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:12479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12513 "configure"
+#line 12613 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:12523: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
;;
esac
+ if test "$WXGTK20" = 1; then
+ if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes" ; then
+
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:12704: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
+ ;;
+esac
+fi
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ echo $ac_n "checking for pangoft2""... $ac_c" 1>&6
+echo "configure:12748: checking for pangoft2" >&5
+
+ if $PKG_CONFIG --exists "pangoft2" ; then
+ echo "$ac_t""yes" 1>&6
+ succeeded=yes
+
+ echo $ac_n "checking PANGOFT2_CFLAGS""... $ac_c" 1>&6
+echo "configure:12755: checking PANGOFT2_CFLAGS" >&5
+ PANGOFT2_CFLAGS=`$PKG_CONFIG --cflags "pangoft2"`
+ echo "$ac_t""$PANGOFT2_CFLAGS" 1>&6
+
+ echo $ac_n "checking PANGOFT2_LIBS""... $ac_c" 1>&6
+echo "configure:12760: checking PANGOFT2_LIBS" >&5
+ PANGOFT2_LIBS=`$PKG_CONFIG --libs "pangoft2"`
+ echo "$ac_t""$PANGOFT2_LIBS" 1>&6
+ else
+ PANGOFT2_CFLAGS=""
+ PANGOFT2_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ PANGOFT2_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pangoft2"`
+
+ fi
+
+
+
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+
+ CXXFLAGS="$CXXFLAGS $PANGOFT2_CFLAGS"
+ LIBS="$LIBS $PANGOFT2_LIBS"
+
+ else
+
+ echo "configure: warning: pangoft2 library not found, library will be compiled without printing support" 1>&2
+ wxUSE_PRINTING_ARCHITECTURE="no"
+
+
+ fi
+
+ fi
+ fi
+
TOOLKIT_INCLUDE="$wx_cv_cflags_gtk"
GUI_TK_LIBRARY="$wx_cv_libs_gtk"
GUIDIST=GTK_DIST
echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
-echo "configure:12603: checking for gdk_im_open in -lgdk" >&5
+echo "configure:12804: checking for gdk_im_open in -lgdk" >&5
ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgdk $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12611 "configure"
+#line 12812 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gdk_im_open()
; return 0; }
EOF
-if { (eval echo configure:12622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MGL" = 1; then
echo $ac_n "checking for SciTech MGL library""... $ac_c" 1>&6
-echo "configure:12649: checking for SciTech MGL library" >&5
+echo "configure:12850: checking for SciTech MGL library" >&5
if test "x$MGL_ROOT" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MGL library. Make sure MGL_ROOT is set." 1>&2; exit 1; }
if test "$wxUSE_MICROWIN" = 1; then
echo $ac_n "checking for MicroWindows""... $ac_c" 1>&6
-echo "configure:12697: checking for MicroWindows" >&5
+echo "configure:12898: checking for MicroWindows" >&5
if test "x$MICROWINDOWS" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MicroWindows library. Make sure MICROWINDOWS is set." 1>&2; exit 1; }
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:12729: checking for X" >&5
+echo "configure:12930: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 12791 "configure"
+#line 12992 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12865 "configure"
+#line 13066 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:12872: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:12978: checking whether -R must be followed by a space" >&5
+echo "configure:13179: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 12981 "configure"
+#line 13182 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:12988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13189: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 13004 "configure"
+#line 13205 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:13011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:13043: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:13244: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13051 "configure"
+#line 13252 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:13062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:13084: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:13285: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13092 "configure"
+#line 13293 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:13103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:13132: checking for gethostbyname" >&5
+echo "configure:13333: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13137 "configure"
+#line 13338 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:13160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:13181: checking for gethostbyname in -lnsl" >&5
+echo "configure:13382: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13189 "configure"
+#line 13390 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:13200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:13230: checking for connect" >&5
+echo "configure:13431: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13235 "configure"
+#line 13436 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:13258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:13279: checking for connect in -lsocket" >&5
+echo "configure:13480: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13287 "configure"
+#line 13488 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:13298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:13322: checking for remove" >&5
+echo "configure:13523: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13327 "configure"
+#line 13528 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:13350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:13371: checking for remove in -lposix" >&5
+echo "configure:13572: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13379 "configure"
+#line 13580 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:13390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:13414: checking for shmat" >&5
+echo "configure:13615: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13419 "configure"
+#line 13620 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:13442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:13463: checking for shmat in -lipc" >&5
+echo "configure:13664: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13471 "configure"
+#line 13672 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:13482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:13515: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:13716: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13523 "configure"
+#line 13724 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:13534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_NANOX" = "yes"; then
echo $ac_n "checking for MicroWindows/NanoX distribution""... $ac_c" 1>&6
-echo "configure:13570: checking for MicroWindows/NanoX distribution" >&5
+echo "configure:13771: checking for MicroWindows/NanoX distribution" >&5
if test "x$MICROWIN" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MicroWindows library. Make sure MICROWIN is set." 1>&2; exit 1; }
xpm_link=
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:13585: checking for Xpm library" >&5
+echo "configure:13786: checking for Xpm library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
echo "$ac_t""found at $ac_find_libraries" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13617 "configure"
+#line 13818 "configure"
#include "confdefs.h"
#include <X11/xpm.h>
; return 0; }
EOF
-if { (eval echo configure:13629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:13830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
xpm_link=" -lXpm"
if test "$wxUSE_WINE" = 1; then
ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for windows.h""... $ac_c" 1>&6
-echo "configure:13671: checking for windows.h" >&5
+echo "configure:13872: checking for windows.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13676 "configure"
+#line 13877 "configure"
#include "confdefs.h"
#include <windows.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13681: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
xpm_link=
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:13708: checking for Xpm library" >&5
+echo "configure:13909: checking for Xpm library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
mesa_link=
echo $ac_n "checking for Mesa library""... $ac_c" 1>&6
-echo "configure:13736: checking for Mesa library" >&5
+echo "configure:13937: checking for Mesa library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:13784: checking whether -R must be followed by a space" >&5
+echo "configure:13985: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 13787 "configure"
+#line 13988 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:13794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 13810 "configure"
+#line 14011 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:13817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:13849: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:14050: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13857 "configure"
+#line 14058 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:13868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:13890: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:14091: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13898 "configure"
+#line 14099 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:13909: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:13938: checking for gethostbyname" >&5
+echo "configure:14139: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13943 "configure"
+#line 14144 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:13966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:13987: checking for gethostbyname in -lnsl" >&5
+echo "configure:14188: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13995 "configure"
+#line 14196 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:14006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:14036: checking for connect" >&5
+echo "configure:14237: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14041 "configure"
+#line 14242 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:14064: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:14085: checking for connect in -lsocket" >&5
+echo "configure:14286: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14093 "configure"
+#line 14294 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:14104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:14128: checking for remove" >&5
+echo "configure:14329: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14133 "configure"
+#line 14334 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:14156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:14177: checking for remove in -lposix" >&5
+echo "configure:14378: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14185 "configure"
+#line 14386 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:14196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:14220: checking for shmat" >&5
+echo "configure:14421: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14225 "configure"
+#line 14426 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:14248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:14269: checking for shmat in -lipc" >&5
+echo "configure:14470: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14277 "configure"
+#line 14478 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:14288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:14321: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:14522: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14329 "configure"
+#line 14530 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:14340: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
COMPILED_X_PROGRAM=0
echo $ac_n "checking for Motif/Lesstif headers""... $ac_c" 1>&6
-echo "configure:14375: checking for Motif/Lesstif headers" >&5
+echo "configure:14576: checking for Motif/Lesstif headers" >&5
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
done
if test "$ac_find_includes" != "" ; then
- echo "$ac_t""found $ac_find_includes" 1>&6
+ echo "$ac_t""found in $ac_find_includes" 1>&6
+
+ ac_path_to_include=$ac_find_includes
+ echo "$TOOLKIT_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null
+ result=$?
+ if test $result = 0; then
+ ac_path_to_include=""
+ else
+ ac_path_to_include=" -I$ac_find_includes"
+ fi
+
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE$ac_path_to_include"
else
cat > conftest.$ac_ext <<EOF
-#line 14390 "configure"
+#line 14602 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:14402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14614: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""found in default search path" 1>&6
if test "$COMPILED_X_PROGRAM" = 0; then
echo $ac_n "checking for Motif/Lesstif library""... $ac_c" 1>&6
-echo "configure:14423: checking for Motif/Lesstif library" >&5
+echo "configure:14635: checking for Motif/Lesstif library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
done
if test "$ac_find_libraries" != "" ; then
-
- ac_path_to_include=$ac_find_includes
- echo "$TOOLKIT_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null
- result=$?
- if test $result = 0; then
- ac_path_to_include=""
- else
- ac_path_to_include=" -I$ac_find_includes"
- fi
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
echo "$GUI_TK_LIBRARY" | grep "\-L$ac_find_libraries" > /dev/null
ac_path_to_link=" -L$ac_find_libraries"
fi
-
GUI_TK_LIBRARY="$GUI_TK_LIBRARY$ac_path_to_link"
- TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE$ac_path_to_include"
- echo "$ac_t""found at $ac_find_libraries" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 14462 "configure"
+ save_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS $TOOLKIT_INCLUDE"
+
+ cat > conftest.$ac_ext <<EOF
+#line 14666 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:14474: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14678: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""found in default search path" 1>&6
fi
rm -f conftest*
+
+ CFLAGS=$save_CFLAGS
fi
fi
xpm_link=
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:14496: checking for Xpm library" >&5
+echo "configure:14702: checking for Xpm library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
fi
GUI_TK_LIBRARY="$GUI_TK_LIBRARY$ac_path_to_link"
+
xpm_link=" -lXpm"
cat >> confdefs.h <<\EOF
#define wxHAVE_LIB_XPM 1
echo "$ac_t""found at $ac_find_libraries" 1>&6
else
+ save_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS $TOOLKIT_INCLUDE"
+
cat > conftest.$ac_ext <<EOF
-#line 14528 "configure"
+#line 14738 "configure"
#include "confdefs.h"
#include <X11/xpm.h>
; return 0; }
EOF
-if { (eval echo configure:14540: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
xpm_link=" -lXpm"
fi
rm -f conftest*
+
+ CFLAGS=$save_CFLAGS
fi
echo $ac_n "checking if we need -lXp and/or -lSM -lICE""... $ac_c" 1>&6
-echo "configure:14565: checking if we need -lXp and/or -lSM -lICE" >&5
+echo "configure:14777: checking if we need -lXp and/or -lSM -lICE" >&5
libp_link=""
libsm_ice_link=""
libs_found=0
if test "$libs_found" = "0"; then
save_LIBS="$LIBS"
LIBS="$GUI_TK_LIBRARY -lXm${xpm_link} ${libp} -lXmu -lXext -lXt${libsm_ice} -lX11"
+ save_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS $TOOLKIT_INCLUDE"
+
cat > conftest.$ac_ext <<EOF
-#line 14576 "configure"
+#line 14791 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:14591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
libp_link="$libp"
fi
rm -f conftest*
+
LIBS="$save_LIBS"
+ CFLAGS=$save_CFLAGS
fi
done
fi
else
ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6
-echo "configure:14739: checking for GL/gl.h" >&5
+echo "configure:14956: checking for GL/gl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14744 "configure"
+#line 14961 "configure"
#include "confdefs.h"
#include <GL/gl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:14749: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14966: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for -lGL""... $ac_c" 1>&6
-echo "configure:14767: checking for -lGL" >&5
+echo "configure:14984: checking for -lGL" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for -lMesaGL""... $ac_c" 1>&6
-echo "configure:14800: checking for -lMesaGL" >&5
+echo "configure:15017: checking for -lMesaGL" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
*-*-linux* )
if test "$GCC" != "yes"; then
echo $ac_n "checking for Intel compiler""... $ac_c" 1>&6
-echo "configure:14976: checking for Intel compiler" >&5
+echo "configure:15193: checking for Intel compiler" >&5
if eval "test \"`echo '$''{'wx_cv_prog_icc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14982 "configure"
+#line 15199 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:14993: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15210: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_prog_icc=yes
else
# Extract the first word of "makeC++SharedLib", so it can be a program name with args.
set dummy makeC++SharedLib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:15044: checking for $ac_word" >&5
+echo "configure:15261: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AIX_CXX_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "Rez", so it can be a program name with args.
set dummy Rez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:15148: checking for $ac_word" >&5
+echo "configure:15365: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RESCOMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "DeRez", so it can be a program name with args.
set dummy DeRez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:15178: checking for $ac_word" >&5
+echo "configure:15395: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DEREZ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:15221: checking for ANSI C header files" >&5
+echo "configure:15438: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15226 "configure"
+#line 15443 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:15234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:15451: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 15251 "configure"
+#line 15468 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 15269 "configure"
+#line 15486 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 15290 "configure"
+#line 15507 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:15301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:15518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:15325: checking for mode_t" >&5
+echo "configure:15542: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15330 "configure"
+#line 15547 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:15358: checking for off_t" >&5
+echo "configure:15575: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15363 "configure"
+#line 15580 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:15391: checking for pid_t" >&5
+echo "configure:15608: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15396 "configure"
+#line 15613 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:15424: checking for size_t" >&5
+echo "configure:15641: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15429 "configure"
+#line 15646 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:15457: checking for uid_t in sys/types.h" >&5
+echo "configure:15674: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15462 "configure"
+#line 15679 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking if size_t is unsigned int""... $ac_c" 1>&6
-echo "configure:15500: checking if size_t is unsigned int" >&5
+echo "configure:15717: checking if size_t is unsigned int" >&5
if eval "test \"`echo '$''{'wx_cv_size_t_is_uint'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15505 "configure"
+#line 15722 "configure"
#include "confdefs.h"
#include <stddef.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:15518: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15735: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_size_t_is_uint=no
else
else
echo $ac_n "checking if size_t is unsigned long""... $ac_c" 1>&6
-echo "configure:15541: checking if size_t is unsigned long" >&5
+echo "configure:15758: checking if size_t is unsigned long" >&5
if eval "test \"`echo '$''{'wx_cv_size_t_is_ulong'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15546 "configure"
+#line 15763 "configure"
#include "confdefs.h"
#include <stddef.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:15559: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_size_t_is_ulong=no
else
echo $ac_n "checking for pw_gecos in struct passwd""... $ac_c" 1>&6
-echo "configure:15593: checking for pw_gecos in struct passwd" >&5
+echo "configure:15810: checking for pw_gecos in struct passwd" >&5
if eval "test \"`echo '$''{'wx_cv_struct_pw_gecos'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15599 "configure"
+#line 15816 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:15610: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15827: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_pw_gecos=yes
fi
-WCHAR_OK=0
if test "$wx_cv_sizeof_wchar_t" != "0"; then
- WCHAR_LINK=
+ cat >> confdefs.h <<\EOF
+#define wxUSE_WCHAR_T 1
+EOF
+
+
+ WCSLEN_FOUND=0
+ WCHAR_LINK=
for ac_func in wcslen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:15645: checking for $ac_func" >&5
+echo "configure:15867: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15650 "configure"
+#line 15872 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:15673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
-
- cat >> confdefs.h <<\EOF
-#define HAVE_WCSLEN 1
-EOF
-
- WCHAR_OK=1
-
+ WCSLEN_FOUND=1
else
echo "$ac_t""no" 1>&6
fi
done
- if test "$WCHAR_OK" = 0; then
+ if test "$WCSLEN_FOUND" = 0; then
if test "$TOOLKIT" = "MSW"; then
echo $ac_n "checking for wcslen in -lmsvcrt""... $ac_c" 1>&6
-echo "configure:15707: checking for wcslen in -lmsvcrt" >&5
+echo "configure:15923: checking for wcslen in -lmsvcrt" >&5
ac_lib_var=`echo msvcrt'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmsvcrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 15715 "configure"
+#line 15931 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:15726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
-
- cat >> confdefs.h <<\EOF
-#define HAVE_WCSLEN 1
-EOF
-
- WCHAR_OK=1
-
+ WCHAR_OK=1
else
echo "$ac_t""no" 1>&6
fi
else
echo $ac_n "checking for wcslen in -lw""... $ac_c" 1>&6
-echo "configure:15754: checking for wcslen in -lw" >&5
+echo "configure:15964: checking for wcslen in -lw" >&5
ac_lib_var=`echo w'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lw $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 15762 "configure"
+#line 15972 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:15773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15983: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_WCSLEN 1
-EOF
-
WCHAR_LINK=" -lw"
- WCHAR_OK=1
+ WCSLEN_FOUND=1
else
echo "$ac_t""no" 1>&6
fi
fi
-fi
-if test "$WCHAR_OK" = 1; then
- cat >> confdefs.h <<\EOF
-#define wxUSE_WCHAR_T 1
+ if test "$WCSLEN_FOUND" = 1; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_WCSLEN 1
EOF
+ fi
for ac_func in wcsrtombs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:15813: checking for $ac_func" >&5
+echo "configure:16019: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15818 "configure"
+#line 16024 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:15841: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16047: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
else
- if test "$USE_DARWIN" = 1; then
- cat >> confdefs.h <<\EOF
-#define wxUSE_WCHAR_T 1
-EOF
-
- else
- echo "configure: warning: Wide character support is unavailable" 1>&2
- fi
+ echo "configure: warning: Wide character support is unavailable" 1>&2
fi
-echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:15877: checking for vprintf" >&5
-if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+for ac_func in vsnprintf
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:16087: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15882 "configure"
+#line 16092 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char vprintf(); below. */
+ which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char vprintf();
+char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub_vprintf) || defined (__stub___vprintf)
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-vprintf();
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:15905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func_vprintf=yes"
+ eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_vprintf=no"
+ eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_VPRINTF 1
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
EOF
-
+
else
echo "$ac_t""no" 1>&6
fi
+done
-if test "$ac_cv_func_vprintf" != yes; then
-echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:15929: checking for _doprnt" >&5
-if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
+
+if test "$wxUSE_UNICODE" = yes; then
+ for ac_func in fputwc wprintf vswprintf
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:16147: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15934 "configure"
+#line 16152 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char _doprnt(); below. */
+ which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char _doprnt();
+char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub__doprnt) || defined (__stub____doprnt)
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-_doprnt();
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:15957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func__doprnt=yes"
+ eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func__doprnt=no"
+ eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_DOPRNT 1
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
EOF
-
+
else
echo "$ac_t""no" 1>&6
fi
+done
fi
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6
-echo "configure:15987: checking for vsnprintf" >&5
-if eval "test \"`echo '$''{'wx_cv_func_vsnprintf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
- cat > conftest.$ac_ext <<EOF
-#line 15993 "configure"
-#include "confdefs.h"
-
- #include <stdio.h>
- #include <stdarg.h>
-
-int main() {
-
- int wx_test_vsnprintf(const char *, ...);
-
- wx_test_vsnprintf("%s");
- return 0;
- }
-
- int wx_test_vsnprintf(const char *fmt, ...)
- {
- char *s;
-
- va_list argp;
- va_start(argp, fmt);
- vsnprintf(s, 42, fmt, argp);
- va_end(argp);
-
-; return 0; }
-EOF
-if { (eval echo configure:16018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
-
- wx_cv_func_vsnprintf=yes
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
-
- cat > conftest.$ac_ext <<EOF
-#line 16029 "configure"
-#include "confdefs.h"
-
- #include <stdio.h>
- #include <stdarg.h>
-
-int main() {
-
- int wx_test_vsnprintf(const char *, ...);
-
- wx_test_vsnprintf("%s");
- return 0;
- }
-
- int wx_test_vsnprintf(const char *fmt, ...)
- {
- char *s;
-
- va_list argp;
- va_start(argp, fmt);
- _vsnprintf(s, 42, fmt, argp);
- va_end(argp);
-
-; return 0; }
-EOF
-if { (eval echo configure:16054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
-
- wx_cv_func_vsnprintf=yes
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
-
- wx_cv_func_vsnprintf=no
-
-fi
-rm -f conftest*
-
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$wx_cv_func_vsnprintf" 1>&6
-
-if test "$wx_cv_func_vsnprintf" = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_VSNPRINTF 1
-EOF
-
-else
- echo "configure: warning: unsafe function vsprintf will be used instead of vsnprintf" 1>&2
-fi
-
-echo $ac_n "checking for vsscanf""... $ac_c" 1>&6
-echo "configure:16086: checking for vsscanf" >&5
-if eval "test \"`echo '$''{'wx_cv_func_vsscanf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
- cat > conftest.$ac_ext <<EOF
-#line 16092 "configure"
-#include "confdefs.h"
-
- #include <stdio.h>
- #include <stdarg.h>
-
-int main() {
-
- int wx_test_vsscanf(const char *, ...);
-
- wx_test_vsscanf("%d");
- return 0;
- }
-
- int wx_test_vsscanf(const char *fmt, ...)
- {
- va_list argp;
- va_start(argp, fmt);
- vsscanf("42", fmt, argp);
- va_end(argp);
-
-; return 0; }
-EOF
-if { (eval echo configure:16115: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
-
- wx_cv_func_vsscanf=yes
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
-
- wx_cv_func_vsscanf=no
-
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$wx_cv_func_vsscanf" 1>&6
-
-if test "$wx_cv_func_vsscanf" = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_VSSCANF 1
-EOF
-
-fi
-
if test "$TOOLKIT" != "MSW"; then
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:16167: checking for iconv" >&5
+echo "configure:16240: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 16175 "configure"
+#line 16248 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:16185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS -liconv"
cat > conftest.$ac_ext <<EOF
-#line 16197 "configure"
+#line 16270 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:16207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking if iconv needs const""... $ac_c" 1>&6
-echo "configure:16228: checking if iconv needs const" >&5
+echo "configure:16301: checking if iconv needs const" >&5
if eval "test \"`echo '$''{'wx_cv_func_iconv_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16233 "configure"
+#line 16306 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:16252: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16325: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_iconv_const="no"
else
for ac_func in sigaction
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16297: checking for $ac_func" >&5
+echo "configure:16370: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16302 "configure"
+#line 16375 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for sa_handler type""... $ac_c" 1>&6
-echo "configure:16366: checking for sa_handler type" >&5
+echo "configure:16439: checking for sa_handler type" >&5
if eval "test \"`echo '$''{'wx_cv_type_sa_handler'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16372 "configure"
+#line 16445 "configure"
#include "confdefs.h"
#include <signal.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:16384: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_sa_handler=int
for ac_func in vfork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16421: checking for $ac_func" >&5
+echo "configure:16494: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16426 "configure"
+#line 16499 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in mkstemp mktemp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16477: checking for $ac_func" >&5
+echo "configure:16550: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16482 "configure"
+#line 16555 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for statfs""... $ac_c" 1>&6
-echo "configure:16531: checking for statfs" >&5
+echo "configure:16604: checking for statfs" >&5
if eval "test \"`echo '$''{'wx_cv_func_statfs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16536 "configure"
+#line 16609 "configure"
#include "confdefs.h"
#if defined(__BSD__)
; return 0; }
EOF
-if { (eval echo configure:16557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16630: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_statfs=yes
else
echo $ac_n "checking for statvfs""... $ac_c" 1>&6
-echo "configure:16584: checking for statvfs" >&5
+echo "configure:16657: checking for statvfs" >&5
if eval "test \"`echo '$''{'wx_cv_func_statvfs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16589 "configure"
+#line 16662 "configure"
#include "confdefs.h"
#include <sys/statvfs.h>
; return 0; }
EOF
-if { (eval echo configure:16605: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16678: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_statvfs=yes
for ac_func in fcntl flock
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16639: checking for $ac_func" >&5
+echo "configure:16712: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16644 "configure"
+#line 16717 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in timegm
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16701: checking for $ac_func" >&5
+echo "configure:16774: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16706 "configure"
+#line 16779 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in putenv setenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16757: checking for $ac_func" >&5
+echo "configure:16830: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16762 "configure"
+#line 16835 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in nanosleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16832: checking for $ac_func" >&5
+echo "configure:16905: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16837 "configure"
+#line 16910 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16860: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6
-echo "configure:16885: checking for nanosleep in -lposix4" >&5
+echo "configure:16958: checking for nanosleep in -lposix4" >&5
ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16893 "configure"
+#line 16966 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
nanosleep()
; return 0; }
EOF
-if { (eval echo configure:16904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in usleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16932: checking for $ac_func" >&5
+echo "configure:17005: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16937 "configure"
+#line 17010 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in uname gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17003: checking for $ac_func" >&5
+echo "configure:17076: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17008 "configure"
+#line 17081 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strtok_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17068: checking for $ac_func" >&5
+echo "configure:17141: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17073 "configure"
+#line 17146 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17136: checking for $ac_func" >&5
+echo "configure:17209: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17141 "configure"
+#line 17214 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
-echo "configure:17189: checking for inet_addr in -lnsl" >&5
+echo "configure:17262: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17197 "configure"
+#line 17270 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:17208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lresolv""... $ac_c" 1>&6
-echo "configure:17227: checking for inet_addr in -lresolv" >&5
+echo "configure:17300: checking for inet_addr in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17235 "configure"
+#line 17308 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:17246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lsocket""... $ac_c" 1>&6
-echo "configure:17265: checking for inet_addr in -lsocket" >&5
+echo "configure:17338: checking for inet_addr in -lsocket" >&5
ac_lib_var=`echo socket'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17273 "configure"
+#line 17346 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:17284: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in inet_aton
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17320: checking for $ac_func" >&5
+echo "configure:17393: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17325 "configure"
+#line 17398 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_aton in -l$INET_LINK""... $ac_c" 1>&6
-echo "configure:17373: checking for inet_aton in -l$INET_LINK" >&5
+echo "configure:17446: checking for inet_aton in -l$INET_LINK" >&5
ac_lib_var=`echo $INET_LINK'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$INET_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17381 "configure"
+#line 17454 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:17392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
CPP_MT_FLAG=
+COMMON_THREADCPPFLAGS=
if test "$TOOLKIT" != "MSW"; then
case $flag in
none)
echo $ac_n "checking whether pthreads work without any flags""... $ac_c" 1>&6
-echo "configure:17527: checking whether pthreads work without any flags" >&5
+echo "configure:17601: checking whether pthreads work without any flags" >&5
;;
-*)
echo $ac_n "checking whether pthreads work with $flag""... $ac_c" 1>&6
-echo "configure:17532: checking whether pthreads work with $flag" >&5
+echo "configure:17606: checking whether pthreads work with $flag" >&5
THREADS_CFLAGS="$flag"
;;
*)
echo $ac_n "checking for the pthreads library -l$flag""... $ac_c" 1>&6
-echo "configure:17538: checking for the pthreads library -l$flag" >&5
+echo "configure:17612: checking for the pthreads library -l$flag" >&5
THREADS_LINK="-l$flag"
;;
esac
CFLAGS="$THREADS_CFLAGS $CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 17549 "configure"
+#line 17623 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
pthread_create(0,0,0,0);
; return 0; }
EOF
-if { (eval echo configure:17556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
THREADS_OK=yes
else
LIBS="$THREADS_LINK $THREADS_CFLAGS $LIBS"
echo $ac_n "checking if more special flags are required for pthreads""... $ac_c" 1>&6
-echo "configure:17584: checking if more special flags are required for pthreads" >&5
+echo "configure:17658: checking if more special flags are required for pthreads" >&5
flag=no
case "${host}" in
*-aix* | *-freebsd*)
for ac_func in thr_setconcurrency
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17610: checking for $ac_func" >&5
+echo "configure:17684: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17615 "configure"
+#line 17689 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:17667: checking for $ac_hdr" >&5
+echo "configure:17741: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17672 "configure"
+#line 17746 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:17677: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:17751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$ac_cv_header_sched_h" = "yes"; then
echo $ac_n "checking for sched_yield""... $ac_c" 1>&6
-echo "configure:17705: checking for sched_yield" >&5
+echo "configure:17779: checking for sched_yield" >&5
if eval "test \"`echo '$''{'ac_cv_func_sched_yield'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17710 "configure"
+#line 17784 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char sched_yield(); below. */
; return 0; }
EOF
-if { (eval echo configure:17733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_sched_yield=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
-echo "configure:17755: checking for sched_yield in -lposix4" >&5
+echo "configure:17829: checking for sched_yield in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17763 "configure"
+#line 17837 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:17774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
HAVE_PRIOR_FUNCS=0
echo $ac_n "checking for pthread_attr_getschedpolicy""... $ac_c" 1>&6
-echo "configure:17807: checking for pthread_attr_getschedpolicy" >&5
+echo "configure:17881: checking for pthread_attr_getschedpolicy" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_attr_getschedpolicy'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17812 "configure"
+#line 17886 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_attr_getschedpolicy(); below. */
; return 0; }
EOF
-if { (eval echo configure:17835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17909: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_attr_getschedpolicy=yes"
else
if eval "test \"`echo '$ac_cv_func_'pthread_attr_getschedpolicy`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for pthread_attr_setschedparam""... $ac_c" 1>&6
-echo "configure:17850: checking for pthread_attr_setschedparam" >&5
+echo "configure:17924: checking for pthread_attr_setschedparam" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_attr_setschedparam'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17855 "configure"
+#line 17929 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_attr_setschedparam(); below. */
; return 0; }
EOF
-if { (eval echo configure:17878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17952: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_attr_setschedparam=yes"
else
if eval "test \"`echo '$ac_cv_func_'pthread_attr_setschedparam`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for sched_get_priority_max""... $ac_c" 1>&6
-echo "configure:17893: checking for sched_get_priority_max" >&5
+echo "configure:17967: checking for sched_get_priority_max" >&5
if eval "test \"`echo '$''{'ac_cv_func_sched_get_priority_max'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17898 "configure"
+#line 17972 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes
else
; return 0; }
EOF
-if { (eval echo configure:17923: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_sched_get_priority_max=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_get_priority_max in -lposix4""... $ac_c" 1>&6
-echo "configure:17941: checking for sched_get_priority_max in -lposix4" >&5
+echo "configure:18015: checking for sched_get_priority_max in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17949 "configure"
+#line 18023 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_get_priority_max()
; return 0; }
EOF
-if { (eval echo configure:17960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for pthread_cancel""... $ac_c" 1>&6
-echo "configure:18005: checking for pthread_cancel" >&5
+echo "configure:18079: checking for pthread_cancel" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_cancel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18010 "configure"
+#line 18084 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_cancel(); below. */
; return 0; }
EOF
-if { (eval echo configure:18033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_cancel=yes"
else
echo $ac_n "checking for pthread_cleanup_push/pop""... $ac_c" 1>&6
-echo "configure:18058: checking for pthread_cleanup_push/pop" >&5
+echo "configure:18132: checking for pthread_cleanup_push/pop" >&5
if eval "test \"`echo '$''{'wx_cv_func_pthread_cleanup_push'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18064 "configure"
+#line 18138 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:18074: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18148: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_pthread_cleanup_push=yes
fi
- if test "x$wx_cv_lib_glibc21" = "xyes"; then
- CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
- fi
-
echo $ac_n "checking for pthread_mutexattr_t""... $ac_c" 1>&6
-echo "configure:18106: checking for pthread_mutexattr_t" >&5
+echo "configure:18176: checking for pthread_mutexattr_t" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_mutexattr_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18112 "configure"
+#line 18182 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:18122: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18192: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_pthread_mutexattr_t=yes
else
echo $ac_n "checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER""... $ac_c" 1>&6
-echo "configure:18149: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
+echo "configure:18219: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_rec_mutex_init'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18155 "configure"
+#line 18225 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:18164: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18234: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_pthread_rec_mutex_init=yes
fi
fi
+else
+ if test "$wxUSE_THREADS" = "yes" ; then
+ case "${host}" in
+ *-*-mingw32* )
+ CFLAGS="$CFLAGS -mthreads"
+ CXXFLAGS="$CXXFLAGS -mthreads"
+ COMMON_THREADCPPFLAGS="-mthreads"
+ LDFLAGS="$LDFLAGS -mthreads"
+ ;;
+ esac
+ fi
fi
if test "$wxUSE_THREADS" = "yes"; then
else
if test "$ac_cv_func_strtok_r" = "yes"; then
echo $ac_n "checking if -D_REENTRANT is needed""... $ac_c" 1>&6
-echo "configure:18206: checking if -D_REENTRANT is needed" >&5
+echo "configure:18287: checking if -D_REENTRANT is needed" >&5
if test "$NEEDS_D_REENTRANT_FOR_R_FUNCS" = 1; then
TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D_REENTRANT"
echo "$ac_t""yes" 1>&6
for ac_func in strptime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18591: checking for $ac_func" >&5
+echo "configure:18672: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18596 "configure"
+#line 18677 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for timezone variable in <time.h>""... $ac_c" 1>&6
-echo "configure:18645: checking for timezone variable in <time.h>" >&5
+echo "configure:18726: checking for timezone variable in <time.h>" >&5
if eval "test \"`echo '$''{'wx_cv_var_timezone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18651 "configure"
+#line 18732 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18663: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18674 "configure"
+#line 18755 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18686: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=_timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18697 "configure"
+#line 18778 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18790: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=__timezone
for ac_func in localtime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18750: checking for $ac_func" >&5
+echo "configure:18831: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18755 "configure"
+#line 18836 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18859: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_localtime" = "yes"; then
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:18805: checking for tm_gmtoff in struct tm" >&5
+echo "configure:18886: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'wx_cv_struct_tm_has_gmtoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18811 "configure"
+#line 18892 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18823: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18904: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_tm_has_gmtoff=yes
for ac_func in gettimeofday ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18852: checking for $ac_func" >&5
+echo "configure:18933: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18857 "configure"
+#line 18938 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18880: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_gettimeofday" = "yes"; then
echo $ac_n "checking whether gettimeofday takes two arguments""... $ac_c" 1>&6
-echo "configure:18907: checking whether gettimeofday takes two arguments" >&5
+echo "configure:18988: checking whether gettimeofday takes two arguments" >&5
if eval "test \"`echo '$''{'wx_cv_func_gettimeofday_has_2_args'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18922 "configure"
+#line 19003 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:18935: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19016: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=yes
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18943 "configure"
+#line 19024 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:18956: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19037: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=no
else
if test "$wxUSE_SOCKETS" = "yes"; then
- if test "$wxUSE_X11" = "1"; then
- echo "configure: warning: wxSocket not yet supported under X11... disabled" 1>&2
- wxUSE_SOCKETS="no"
- fi
-
if test "$wxUSE_MGL" = "1"; then
echo "configure: warning: wxSocket not yet supported under MGL... disabled" 1>&2
wxUSE_SOCKETS="no"
if test "$wxUSE_SOCKETS" = "yes"; then
if test "$TOOLKIT" != "MSW"; then
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:19016: checking for socket" >&5
+echo "configure:19092: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19021 "configure"
+#line 19097 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:19044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:19062: checking for socket in -lsocket" >&5
+echo "configure:19138: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19070 "configure"
+#line 19146 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:19081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_SOCKETS" = "yes" ; then
if test "$TOOLKIT" != "MSW"; then
echo $ac_n "checking what is the type of the third argument of getsockname""... $ac_c" 1>&6
-echo "configure:19117: checking what is the type of the third argument of getsockname" >&5
+echo "configure:19193: checking what is the type of the third argument of getsockname" >&5
if eval "test \"`echo '$''{'wx_cv_type_getsockname3'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19132 "configure"
+#line 19208 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:19145: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19221: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=socklen_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 19153 "configure"
+#line 19229 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:19166: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19242: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=size_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 19174 "configure"
+#line 19250 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:19187: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19263: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=int
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:19259: checking for $ac_hdr" >&5
+echo "configure:19335: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19264 "configure"
+#line 19340 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:19269: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:19345: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19323: checking for $ac_func" >&5
+echo "configure:19399: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19328 "configure"
+#line 19404 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:19379: checking for dlopen in -ldl" >&5
+echo "configure:19455: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19387 "configure"
+#line 19463 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:19398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in shl_load
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19427: checking for $ac_func" >&5
+echo "configure:19503: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19432 "configure"
+#line 19508 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld in -lshl_load""... $ac_c" 1>&6
-echo "configure:19483: checking for dld in -lshl_load" >&5
+echo "configure:19559: checking for dld in -lshl_load" >&5
ac_lib_var=`echo shl_load'_'dld | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lshl_load $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19491 "configure"
+#line 19567 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dld()
; return 0; }
EOF
-if { (eval echo configure:19502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in dlerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19541: checking for $ac_func" >&5
+echo "configure:19617: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19546 "configure"
+#line 19622 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19645: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlerror in -ldl""... $ac_c" 1>&6
-echo "configure:19594: checking for dlerror in -ldl" >&5
+echo "configure:19670: checking for dlerror in -ldl" >&5
ac_lib_var=`echo dl'_'dlerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19602 "configure"
+#line 19678 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlerror()
; return 0; }
EOF
-if { (eval echo configure:19613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MSW" = 1 -a "$wxUSE_UNICODE_MSLU" = "yes"; then
echo $ac_n "checking for main in -lunicows""... $ac_c" 1>&6
-echo "configure:19688: checking for main in -lunicows" >&5
+echo "configure:19764: checking for main in -lunicows" >&5
ac_lib_var=`echo unicows'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lunicows $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19696 "configure"
+#line 19772 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:19703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then
- if test "$wxUSE_UNIVERSAL" = "yes"; then
- echo "configure: warning: MDI not yet supported for wxUniversal... disabled" 1>&2
- wxUSE_MDI_ARCHITECTURE=no
- fi
- if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then
- cat >> confdefs.h <<\EOF
+
+ if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then
+ cat >> confdefs.h <<\EOF
#define wxUSE_MDI_ARCHITECTURE 1
EOF
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS mdi"
- fi
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS mdi"
+ fi
fi
if test "$wxUSE_DOC_VIEW_ARCHITECTURE" = "yes" ; then
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:19883: checking for $ac_hdr" >&5
+echo "configure:19956: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19888 "configure"
+#line 19961 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:19893: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:19966: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$ac_cv_header_ole2_h" = "yes" ; then
if test "$GCC" = yes ; then
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+ echo $ac_n "checking if g++ requires -fvtable-thunks""... $ac_c" 1>&6
+echo "configure:20005: checking if g++ requires -fvtable-thunks" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 20007 "configure"
+#include "confdefs.h"
+#include <windows.h>
+ #include <ole2.h>
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:20015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6
+ CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS_CXX -fvtable-thunks"
+fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
ALL_OBJECTS="$ALL_OBJECTS \$(OLEOBJS)"
- CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS_CXX -fvtable-thunks"
LIBS=" -lrpcrt4 -loleaut32 -lole32 -luuid$LIBS"
cat >> confdefs.h <<\EOF
#define wxUSE_OLE 1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS artprov controls dialogs \
drawing dynamic erase event exec font image \
- minimal richedit rotate widgets"
+ minimal propsize rotate widgets"
CPPFLAGS="$CPPFLAGS \$(EXTRADEFS) \$(APPEXTRADEFS)"
else
EXTRA_CFLAGS="$WXDEBUG $WXODBCFLAG $PROFILE $OPTIMISE $INCLUDES"
-CFLAGS=`echo $CFLAGS $EXTRA_CFLAGS $CXXWARNINGS | sed 's/ \\+/ /g'`
-CXXFLAGS=`echo $CXXFLAGS $EXTRA_CFLAGS $CXXWARNINGS | sed 's/ \+/ /g'`
+CFLAGS=`echo $EXTRA_CFLAGS $CFLAGS $CXXWARNINGS | sed 's/ \\+/ /g'`
+CXXFLAGS=`echo $EXTRA_CFLAGS $CXXFLAGS $CXXWARNINGS | sed 's/ \+/ /g'`
LIBS=`echo $LIBS | sed 's/ \+/ /g'`
LDFLAGS="$LDFLAGS $PROFILE"
+
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:20885: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:20996: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
s%@GTK_CFLAGS@%$GTK_CFLAGS%g
s%@GTK_LIBS@%$GTK_LIBS%g
s%@GTK_CONFIG@%$GTK_CONFIG%g
+s%@PANGOFT2_CFLAGS@%$PANGOFT2_CFLAGS%g
+s%@PANGOFT2_LIBS@%$PANGOFT2_LIBS%g
s%@X_CFLAGS@%$X_CFLAGS%g
s%@X_PRE_LIBS@%$X_PRE_LIBS%g
s%@X_LIBS@%$X_LIBS%g
s%@GUIDIST@%$GUIDIST%g
s%@PORT_FILES@%$PORT_FILES%g
s%@DISTDIR@%$DISTDIR%g
+s%@COMMON_THREADCPPFLAGS@%$COMMON_THREADCPPFLAGS%g
s%@SAMPLES_SUBDIRS@%$SAMPLES_SUBDIRS%g
s%@LDFLAGS_GL@%$LDFLAGS_GL%g
s%@LDFLAGS_EXE@%$LDFLAGS_EXE%g
projects / wxWidgets.git / blobdiff