-dnl aclocal.m4 generated automatically by aclocal 1.4
+# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
-dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
+dnl ---------------------------------------------------------------------------
dnl
-AC_DEFUN(AM_PATH_GTK,
+dnl Macros for configure.in for wxWindows by Robert Roebling, Phil Blecker,
+dnl Vadim Zeitlin and Ron Lee
+dnl
+dnl This script is under the wxWindows licence.
+dnl
+dnl Version: $Id$
+dnl ---------------------------------------------------------------------------
+
+
+dnl ===========================================================================
+dnl Objective-C(++) related macros
+dnl ===========================================================================
+m4_define([AC_WX_LANG_OBJECTIVEC],
+[AC_LANG(C)
+ac_ext=m
+])
+
+m4_define([AC_WX_LANG_OBJECTIVECPLUSPLUS],
+[AC_LANG(C++)
+ac_ext=mm
+])
+
+dnl ===========================================================================
+dnl macros to find the a file in the list of include/lib paths
+dnl ===========================================================================
+
+dnl ---------------------------------------------------------------------------
+dnl call WX_PATH_FIND_INCLUDES(search path, header name), sets ac_find_includes
+dnl to the full name of the file that was found or leaves it empty if not found
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_PATH_FIND_INCLUDES],
+[
+ac_find_includes=
+for ac_dir in $1 /usr/include;
+ do
+ if test -f "$ac_dir/$2"; then
+ ac_find_includes=$ac_dir
+ break
+ fi
+ done
+])
+
+dnl ---------------------------------------------------------------------------
+dnl call WX_PATH_FIND_LIBRARIES(search path, header name), sets ac_find_libraries
+dnl to the full name of the file that was found or leaves it empty if not found
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_PATH_FIND_LIBRARIES],
+[
+ac_find_libraries=
+for ac_dir in $1 /usr/lib;
+ do
+ for ac_extension in a so sl dylib dll.a; do
+ if test -f "$ac_dir/lib$2.$ac_extension"; then
+ ac_find_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+])
+
+dnl ---------------------------------------------------------------------------
+dnl Path to include, already defined
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_INCLUDE_PATH_EXIST],
+[
+ dnl never add -I/usr/include to the CPPFLAGS
+ if test "x$1" = "x/usr/include"; then
+ ac_path_to_include=""
+ else
+ echo "$2" | grep "\-I$1" > /dev/null
+ result=$?
+ if test $result = 0; then
+ ac_path_to_include=""
+ else
+ ac_path_to_include=" -I$1"
+ fi
+ fi
+])
+
+dnl ---------------------------------------------------------------------------
+dnl Path to link, already defined
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_LINK_PATH_EXIST],
+[
+ echo "$2" | grep "\-L$1" > /dev/null
+ result=$?
+ if test $result = 0; then
+ ac_path_to_link=""
+ else
+ ac_path_to_link=" -L$1"
+ fi
+])
+
+dnl ===========================================================================
+dnl C++ features test
+dnl ===========================================================================
+
+dnl ---------------------------------------------------------------------------
+dnl WX_CPP_NEW_HEADERS checks whether the compiler has "new" <iostream> header
+dnl or only the old <iostream.h> one - it may be generally assumed that if
+dnl <iostream> exists, the other "new" headers (without .h) exist too.
+dnl
+dnl call WX_CPP_NEW_HEADERS(actiof-if-true, action-if-false)
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([WX_CPP_NEW_HEADERS],
+[
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+
+ AC_CHECK_HEADERS(iostream)
+
+ if test "$ac_cv_header_iostream" = "yes" ; then
+ ifelse([$1], , :, [$1])
+ else
+ ifelse([$2], , :, [$2])
+ fi
+
+ AC_LANG_RESTORE
+])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_CPP_BOOL checks whether the C++ compiler has a built in bool type
+dnl
+dnl call WX_CPP_BOOL - will define HAVE_BOOL if the compiler supports bool
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([WX_CPP_BOOL],
+[
+ AC_CACHE_CHECK([if C++ compiler supports bool], wx_cv_cpp_bool,
+ [
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+
+ AC_TRY_COMPILE(
+ [
+ ],
+ [
+ bool b = true;
+
+ return 0;
+ ],
+ [
+ wx_cv_cpp_bool=yes
+ ],
+ [
+ wx_cv_cpp_bool=no
+ ]
+ )
+
+ AC_LANG_RESTORE
+ ])
+
+ if test "$wx_cv_cpp_bool" = "yes"; then
+ AC_DEFINE(HAVE_BOOL)
+ fi
+])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_CPP_EXPLICIT checks whether the C++ compiler support the explicit
+dnl keyword and defines HAVE_EXPLICIT if this is the case
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([WX_CPP_EXPLICIT],
+[
+ AC_CACHE_CHECK([if C++ compiler supports the explicit keyword],
+ wx_cv_explicit,
+ [
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+
+ dnl do the test in 2 steps: first check that the compiler knows about the
+ dnl explicit keyword at all and then verify that it really honours it
+ AC_TRY_COMPILE(
+ [
+ class Foo { public: explicit Foo(int) {} };
+ ],
+ [
+ return 0;
+ ],
+ [
+ AC_TRY_COMPILE(
+ [
+ class Foo { public: explicit Foo(int) {} };
+ static void TakeFoo(const Foo& foo) { }
+ ],
+ [
+ TakeFoo(17);
+ return 0;
+ ],
+ wx_cv_explicit=no,
+ wx_cv_explicit=yes
+ )
+ ],
+ wx_cv_explicit=no
+ )
+
+ AC_LANG_RESTORE
+ ])
+
+ if test "$wx_cv_explicit" = "yes"; then
+ AC_DEFINE(HAVE_EXPLICIT)
+ fi
+])
+
+dnl ---------------------------------------------------------------------------
+dnl a slightly better AC_C_BIGENDIAN macro which allows cross-compiling
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([WX_C_BIGENDIAN],
+[AC_CACHE_CHECK([whether byte ordering is bigendian], ac_cv_c_bigendian,
+[ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/param.h>], [
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif], [# It does; now see whether it defined to BIG_ENDIAN or not.
+AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/param.h>], [
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif], ac_cv_c_bigendian=yes, ac_cv_c_bigendian=no)])
+if test $ac_cv_c_bigendian = unknown; then
+AC_TRY_RUN([main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}], [ac_cv_c_bigendian=no], [ac_cv_c_bigendian=yes], [ac_cv_c_bigendian=unknown])
+fi])
+if test $ac_cv_c_bigendian = unknown; then
+ AC_MSG_WARN([Assuming little-endian target machine - this may be overriden by adding the line "ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}" to config.cache file])
+fi
+if test $ac_cv_c_bigendian = yes; then
+ AC_DEFINE(WORDS_BIGENDIAN)
+fi
+])
+
+dnl ---------------------------------------------------------------------------
+dnl override AC_ARG_ENABLE/WITH to cache the results in .cache file
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([WX_ARG_CACHE_INIT],
+ [
+ wx_arg_cache_file="configarg.cache"
+ echo "loading argument cache $wx_arg_cache_file"
+ rm -f ${wx_arg_cache_file}.tmp
+ touch ${wx_arg_cache_file}.tmp
+ touch ${wx_arg_cache_file}
+ ])
+
+AC_DEFUN([WX_ARG_CACHE_FLUSH],
+ [
+ echo "saving argument cache $wx_arg_cache_file"
+ mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file}
+ ])
+
+dnl this macro checks for a three-valued command line --with argument:
+dnl possible arguments are 'yes', 'no', 'sys', or 'builtin'
+dnl usage: WX_ARG_SYS_WITH(option, helpmessage, variable-name)
+AC_DEFUN([WX_ARG_SYS_WITH],
+ [
+ AC_MSG_CHECKING([for --with-$1])
+ no_cache=0
+ AC_ARG_WITH($1, [$2],
+ [
+ if test "$withval" = yes; then
+ ac_cv_use_$1='$3=yes'
+ elif test "$withval" = no; then
+ ac_cv_use_$1='$3=no'
+ elif test "$withval" = sys; then
+ ac_cv_use_$1='$3=sys'
+ elif test "$withval" = builtin; then
+ ac_cv_use_$1='$3=builtin'
+ else
+ AC_MSG_ERROR([Invalid value for --with-$1: should be yes, no, sys, or builtin])
+ fi
+ ],
+ [
+ LINE=`grep "$3" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_$1='$3='$DEFAULT_$3
+ ])
+
+ eval "$ac_cv_use_$1"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_$1 >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$$3" = yes; then
+ AC_MSG_RESULT(yes)
+ elif test "$$3" = no; then
+ AC_MSG_RESULT(no)
+ elif test "$$3" = sys; then
+ AC_MSG_RESULT([system version])
+ elif test "$$3" = builtin; then
+ AC_MSG_RESULT([builtin version])
+ else
+ AC_MSG_ERROR([Invalid value for --with-$1: should be yes, no, sys, or builtin])
+ fi
+ ])
+
+dnl this macro checks for a command line argument and caches the result
+dnl usage: WX_ARG_WITH(option, helpmessage, variable-name)
+AC_DEFUN([WX_ARG_WITH],
+ [
+ AC_MSG_CHECKING([for --with-$1])
+ no_cache=0
+ AC_ARG_WITH($1, [$2],
+ [
+ if test "$withval" = yes; then
+ ac_cv_use_$1='$3=yes'
+ else
+ ac_cv_use_$1='$3=no'
+ fi
+ ],
+ [
+ LINE=`grep "$3" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_$1='$3='$DEFAULT_$3
+ ])
+
+ eval "$ac_cv_use_$1"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_$1 >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$$3" = yes; then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ fi
+ ])
+
+dnl like WX_ARG_WITH but uses AC_ARG_ENABLE instead of AC_ARG_WITH
+dnl usage: WX_ARG_ENABLE(option, helpmessage, variable-name, enablestring)
+dnl
+dnl enablestring is a hack and allows to show "checking for --disable-foo"
+dnl message when running configure instead of the default "checking for
+dnl --enable-foo" one whih is useful for the options enabled by default
+AC_DEFUN([WX_ARG_ENABLE],
+ [
+ enablestring=$4
+ AC_MSG_CHECKING([for --${enablestring:-enable}-$1])
+ no_cache=0
+ AC_ARG_ENABLE($1, [$2],
+ [
+ if test "$enableval" = yes; then
+ ac_cv_use_$1='$3=yes'
+ else
+ ac_cv_use_$1='$3=no'
+ fi
+ ],
+ [
+ LINE=`grep "$3" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_$1='$3='$DEFAULT_$3
+ ])
+
+ eval "$ac_cv_use_$1"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_$1 >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$$3" = yes; then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ fi
+ ])
+
+
+dnl ===========================================================================
+dnl Linker features test
+dnl ===========================================================================
+
+dnl ---------------------------------------------------------------------------
+dnl WX_VERSIONED_SYMBOLS checks whether the linker can create versioned
+dnl symbols. If it can, sets LDFLAGS_VERSIONING to $CXX flags needed to use
+dnl version script file named versionfile
+dnl
+dnl call WX_VERSIONED_SYMBOLS(versionfile)
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_VERSIONED_SYMBOLS],
+[
+ found_versioning=no
+
+ dnl FIXME - doesn't work, Solaris linker doesn't accept wildcards
+ dnl in the script.
+ dnl dnl Check for known non-gcc cases:
+ dnl case "${host}" in
+ dnl *-*-solaris2* )
+ dnl if test "x$GCC" != "xyes" ; then
+ dnl LDFLAGS_VERSIONING="-M $1"
+ dnl found_versioning=yes
+ dnl fi
+ dnl ;;
+ dnl esac
+
+ dnl Generic check for GCC or GCC-like behaviour (Intel C++, GCC):
+ if test $found_versioning = no ; then
+ AC_CACHE_CHECK([if the linker accepts --version-script], wx_cv_version_script,
+ [
+ echo "VER_1 { *; };" >conftest.sym
+ echo "int main() { return 0; }" >conftest.cpp
+
+ if AC_TRY_COMMAND([
+ $CXX -o conftest.output $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.cpp
+ -Wl,--version-script,conftest.sym >/dev/null 2>conftest.stderr]) ; then
+ if test -s conftest.stderr ; then
+ wx_cv_version_script=no
+ else
+ wx_cv_version_script=yes
+ fi
+ else
+ wx_cv_version_script=no
+ fi
+
+ dnl There's a problem in some old linkers with --version-script that
+ dnl can cause linking to fail when you have objects with vtables in
+ dnl libs 3 deep. This is known to happen in netbsd and openbsd with
+ dnl ld 2.11.2.
+ dnl
+ dnl To test for this we need to make some shared libs and
+ dnl unfortunately we can't be sure of the right way to do that. If the
+ dnl first two compiles don't succeed then it looks like the test isn't
+ dnl working and the result is ignored, but if OTOH the first two
+ dnl succeed but the third does not then the bug has been detected and
+ dnl the --version-script flag is dropped.
+ if test $wx_cv_version_script = yes
+ then
+ echo "struct B { virtual ~B() { } }; \
+ struct D : public B { }; \
+ void F() { D d; }" > conftest.cpp
+
+ if AC_TRY_COMMAND([
+ $CXX -shared -fPIC -o conftest1.output $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.cpp
+ -Wl,--version-script,conftest.sym >/dev/null 2>/dev/null]) &&
+ AC_TRY_COMMAND([
+ $CXX -shared -fPIC -o conftest2.output $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.cpp
+ -Wl,--version-script,conftest.sym conftest1.output >/dev/null 2>/dev/null])
+ then
+ if AC_TRY_COMMAND([
+ $CXX -shared -fPIC -o conftest3.output $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.cpp
+ -Wl,--version-script,conftest.sym conftest2.output conftest1.output >/dev/null 2>/dev/null])
+ then
+ wx_cv_version_script=yes
+ else
+ wx_cv_version_script=no
+ fi
+ fi
+ fi
+
+ rm -f conftest.output conftest.stderr conftest.sym conftest.cpp
+ rm -f conftest1.output conftest2.output conftest3.output
+ ])
+ if test $wx_cv_version_script = yes ; then
+ LDFLAGS_VERSIONING="-Wl,--version-script,$1"
+ fi
+ fi
+])
+
+dnl Based on autoconf _AC_LANG_COMPILER_GNU
+dnl _AC_BAKEFILE_LANG_COMPILER(NAME, LANG, SYMBOL, IF-YES, IF-NO)
+AC_DEFUN([_AC_BAKEFILE_LANG_COMPILER],
+[
+ AC_LANG_PUSH($2)
+ AC_CACHE_CHECK(
+ [whether we are using the $1 $2 compiler],
+ [bakefile_cv_[]_AC_LANG_ABBREV[]_compiler_[]$3],
+ [AC_TRY_COMPILE(
+ [],
+ [
+ #ifndef $3
+ choke me
+ #endif
+ ],
+ [bakefile_cv_[]_AC_LANG_ABBREV[]_compiler_[]$3=yes],
+ [bakefile_cv_[]_AC_LANG_ABBREV[]_compiler_[]$3=no]
+ )
+ ]
+ )
+ AC_LANG_POP($2)
+ if test "x$bakefile_cv_[]_AC_LANG_ABBREV[]_compiler_[]$3" = "xyes"; then
+ :; $4
+ else
+ :; $5
+ fi
+])
+
+dnl Loosely based on autoconf AC_PROG_CC
+AC_DEFUN([AC_BAKEFILE_PROG_SUNCC],
+[
+ _AC_BAKEFILE_LANG_COMPILER(Sun, C, __SUNPRO_C, SUNCC=yes)
+])
+
+dnl Loosely based on autoconf AC_PROG_CC
+AC_DEFUN([AC_BAKEFILE_PROG_SUNCXX],
+[
+ _AC_BAKEFILE_LANG_COMPILER(Sun, C++, __SUNPRO_CC, SUNCXX=yes)
+])
+
+
+dnl ===========================================================================
+dnl "3rd party" macros included here because they are not widely available
+dnl ===========================================================================
+
+dnl ---------------------------------------------------------------------------
+dnl test for availability of iconv()
+dnl ---------------------------------------------------------------------------
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+
+ AC_ARG_WITH([libiconv-prefix],
+[ --with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib], [
+ for dir in `echo "$withval" | tr : ' '`; do
+ if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi
+ if test -d $dir/lib; then LDFLAGS="$LDFLAGS -L$dir/lib"; fi
+ done
+ ])
+
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS -liconv"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ AC_CACHE_CHECK([if iconv needs const], wx_cv_func_iconv_const,
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+ ],
+ [],
+ wx_cv_func_iconv_const="no",
+ wx_cv_func_iconv_const="yes"
+ )
+ )
+
+ iconv_const=
+ if test "x$wx_cv_func_iconv_const" = "xyes"; then
+ iconv_const="const"
+ fi
+
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $iconv_const,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+ LIBICONV=
+ if test "$am_cv_lib_iconv" = yes; then
+ LIBICONV="-liconv"
+ fi
+ AC_SUBST(LIBICONV)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_SYS_LARGEFILE (partly based on the code from autoconf 2.5x)
+dnl ---------------------------------------------------------------------------
+
+dnl WX_SYS_LARGEFILE_TEST
+dnl
+dnl NB: original autoconf test was checking if compiler supported 6 bit off_t
+dnl arithmetic properly but this failed miserably with gcc under Linux
+dnl whereas the system still supports 64 bit files, so now simply check
+dnl that off_t is big enough
+define(WX_SYS_LARGEFILE_TEST,
+[typedef struct {
+ unsigned int field: sizeof(off_t) == 8;
+} wxlf;
+])
+
+
+dnl WX_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, VALUE, CACHE-VAR)
+define(WX_SYS_LARGEFILE_MACRO_VALUE,
+[
+ AC_CACHE_CHECK([for $1 value needed for large files], [$3],
+ [
+ AC_TRY_COMPILE([#define $1 $2
+ #include <sys/types.h>],
+ WX_SYS_LARGEFILE_TEST,
+ [$3=$2],
+ [$3=no])
+ ]
+ )
+
+ if test "$$3" != no; then
+ wx_largefile=yes
+ AC_DEFINE_UNQUOTED([$1], [$$3])
+ fi
+])
+
+
+dnl AC_SYS_LARGEFILE
+dnl ----------------
+dnl By default, many hosts won't let programs access large files;
+dnl one must use special compiler options to get large-file access to work.
+dnl For more details about this brain damage please see:
+dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
+AC_DEFUN([AC_SYS_LARGEFILE],
+[AC_ARG_ENABLE(largefile,
+ [ --disable-largefile omit support for large files])
+if test "$enable_largefile" != no; then
+ dnl _FILE_OFFSET_BITS==64 is needed for Linux, Solaris, ...
+ dnl _LARGE_FILES -- for AIX
+ wx_largefile=no
+ WX_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS, 64, ac_cv_sys_file_offset_bits)
+ if test "x$wx_largefile" != "xyes"; then
+ WX_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES, 1, ac_cv_sys_large_files)
+ fi
+
+ AC_MSG_CHECKING(if large file support is available)
+ if test "x$wx_largefile" = "xyes"; then
+ AC_DEFINE(HAVE_LARGEFILE_SUPPORT)
+ fi
+ AC_MSG_RESULT($wx_largefile)
+fi
+])
+
+
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_cxx_const_cast.html
+dnl
+AC_DEFUN([AC_CXX_CONST_CAST],
+[AC_CACHE_CHECK(whether the compiler supports const_cast<>,
+ac_cv_cxx_const_cast,
+[AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE(,[int x = 0;const int& y = x;int& z = const_cast<int&>(y);return z;],
+ ac_cv_cxx_const_cast=yes, ac_cv_cxx_const_cast=no)
+ AC_LANG_RESTORE
+])
+if test "$ac_cv_cxx_const_cast" = yes; then
+ AC_DEFINE(HAVE_CONST_CAST,,[define if the compiler supports const_cast<>])
+fi
+])
+
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_cxx_reinterpret_cast.html
+AC_DEFUN([AC_CXX_REINTERPRET_CAST],
+[AC_CACHE_CHECK(whether the compiler supports reinterpret_cast<>,
+ac_cv_cxx_reinterpret_cast,
+[AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([#include <typeinfo>
+class Base { public : Base () {} virtual void f () = 0;};
+class Derived : public Base { public : Derived () {} virtual void f () {} };
+class Unrelated { public : Unrelated () {} };
+int g (Unrelated&) { return 0; }],[
+Derived d;Base& b=d;Unrelated& e=reinterpret_cast<Unrelated&>(b);return g(e);],
+ ac_cv_cxx_reinterpret_cast=yes, ac_cv_cxx_reinterpret_cast=no)
+ AC_LANG_RESTORE
+])
+if test "$ac_cv_cxx_reinterpret_cast" = yes; then
+ AC_DEFINE(HAVE_REINTERPRET_CAST,,
+ [define if the compiler supports reinterpret_cast<>])
+fi
+])
+
+dnl and http://www.gnu.org/software/ac-archive/htmldoc/ac_cxx_static_cast.html
+AC_DEFUN([AC_CXX_STATIC_CAST],
+[AC_CACHE_CHECK(whether the compiler supports static_cast<>,
+ac_cv_cxx_static_cast,
+[AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([#include <typeinfo>
+class Base { public : Base () {} virtual void f () = 0; };
+class Derived : public Base { public : Derived () {} virtual void f () {} };
+int g (Derived&) { return 0; }],[
+Derived d; Base& b = d; Derived& s = static_cast<Derived&> (b); return g (s);],
+ ac_cv_cxx_static_cast=yes, ac_cv_cxx_static_cast=no)
+ AC_LANG_RESTORE
+])
+if test "$ac_cv_cxx_static_cast" = yes; then
+ AC_DEFINE(HAVE_STATIC_CAST,, [define if the compiler supports static_cast<>])
+fi
+])
+
+dnl http://autoconf-archive.cryp.to/ac_cxx_dynamic_cast.html
+AC_DEFUN([AC_CXX_DYNAMIC_CAST],
+[AC_CACHE_CHECK(whether the compiler supports dynamic_cast<>,
+ac_cv_cxx_dynamic_cast,
+[AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([#include <typeinfo>
+class Base { public : Base () {} virtual void f () = 0;};
+class Derived : public Base { public : Derived () {} virtual void f () {} };],[
+Derived d; Base& b=d; return dynamic_cast<Derived*>(&b) ? 0 : 1;],
+ ac_cv_cxx_dynamic_cast=yes, ac_cv_cxx_dynamic_cast=no)
+ AC_LANG_RESTORE
+])
+if test "$ac_cv_cxx_dynamic_cast" = yes; then
+ AC_DEFINE(HAVE_DYNAMIC_CAST,,[define if the compiler supports dynamic_cast<>])
+fi
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl Compiler detection macros by David Elliott
+dnl ---------------------------------------------------------------------------
+
+
+dnl ===========================================================================
+dnl Macros to detect non-GNU compilers (MetroWerks, XLC)
+dnl ===========================================================================
+
+dnl Based on autoconf _AC_LANG_COMPILER_GNU
+AC_DEFUN([_AC_BAKEFILE_LANG_COMPILER_MWERKS],
+[AC_CACHE_CHECK([whether we are using the Metrowerks _AC_LANG compiler],
+ [bakefile_cv_[]_AC_LANG_ABBREV[]_compiler_mwerks],
+ [AC_TRY_COMPILE([],[#ifndef __MWERKS__
+ choke me
+#endif
+],
+ [bakefile_compiler_mwerks=yes],
+ [bakefile_compiler_mwerks=no])
+ bakefile_cv_[]_AC_LANG_ABBREV[]_compiler_mwerks=$bakefile_compiler_mwerks
+ ])
+])
+
+dnl Loosely based on autoconf AC_PROG_CC
+dnl TODO: Maybe this should wrap the call to AC_PROG_CC and be used instead.
+AC_DEFUN([AC_BAKEFILE_PROG_MWCC],
+[AC_LANG_PUSH(C)
+_AC_BAKEFILE_LANG_COMPILER_MWERKS
+MWCC=`test $bakefile_cv_c_compiler_mwerks = yes && echo yes`
+AC_LANG_POP(C)
+])
+
+dnl Loosely based on autoconf AC_PROG_CXX
+dnl TODO: Maybe this should wrap the call to AC_PROG_CXX and be used instead.
+AC_DEFUN([AC_BAKEFILE_PROG_MWCXX],
+[AC_LANG_PUSH(C++)
+_AC_BAKEFILE_LANG_COMPILER_MWERKS
+MWCXX=`test $bakefile_cv_cxx_compiler_mwerks = yes && echo yes`
+AC_LANG_POP(C++)
+])
+
+dnl Based on autoconf _AC_LANG_COMPILER_GNU
+AC_DEFUN([_AC_BAKEFILE_LANG_COMPILER_XLC],
+[AC_CACHE_CHECK([whether we are using the IBM xlC _AC_LANG compiler],
+ [wx_cv_[]_AC_LANG_ABBREV[]_compiler_xlc],
+ [AC_TRY_COMPILE([],[#ifndef __xlC__
+ choke me
+#endif
+],
+ [wx_compiler_xlc=yes],
+ [wx_compiler_xlc=no])
+ wx_cv_[]_AC_LANG_ABBREV[]_compiler_xlc=$wx_compiler_xlc
+ ])
+])
+
+dnl Loosely based on autoconf AC_PROG_CC
+AC_DEFUN([AC_BAKEFILE_PROG_XLCC],
+[AC_LANG_PUSH(C)
+_AC_BAKEFILE_LANG_COMPILER_XLC
+XLCC=`test $wx_cv_c_compiler_xlc = yes && echo yes`
+AC_LANG_POP(C)
+])
+
+dnl Loosely based on autoconf AC_PROG_CXX
+AC_DEFUN([AC_BAKEFILE_PROG_XLCXX],
+[AC_LANG_PUSH(C++)
+_AC_BAKEFILE_LANG_COMPILER_XLC
+XLCXX=`test $wx_cv_cxx_compiler_xlc = yes && echo yes`
+AC_LANG_POP(C++)
+])
+
+
+dnl ===========================================================================
+dnl macros to detect specialty compiler options
+dnl ===========================================================================
+
+dnl Figure out if we need to pass -ext o to compiler (MetroWerks)
+AC_DEFUN([AC_BAKEFILE_METROWERKS_EXTO],
+[AC_CACHE_CHECK([if the _AC_LANG compiler requires -ext o], wx_cv_[]_AC_LANG_ABBREV[]_exto,
+dnl First create an empty conf test
+[AC_LANG_CONFTEST([AC_LANG_PROGRAM()])
+dnl Now remove .o and .c.o or .cc.o
+rm -f conftest.$ac_objext conftest.$ac_ext.o
+dnl Now compile the test
+AS_IF([AC_TRY_EVAL(ac_compile)],
+dnl If the test succeeded look for conftest.c.o or conftest.cc.o
+[for ac_file in `(ls conftest.* 2>/dev/null)`; do
+ case $ac_file in
+ conftest.$ac_ext.o)
+ wx_cv_[]_AC_LANG_ABBREV[]_exto="-ext o"
+ ;;
+ *)
+ ;;
+ esac
+done],
+[AC_MSG_FAILURE([cannot figure out if compiler needs -ext o: cannot compile])
+]) dnl AS_IF
+
+rm -f conftest.$ac_ext.o conftest.$ac_objext conftest.$ac_ext
+]) dnl AC_CACHE_CHECK
+
+if test "x$wx_cv_[]_AC_LANG_ABBREV[]_exto" '!=' "x"; then
+ if test "[]_AC_LANG_ABBREV[]" = "c"; then
+ CFLAGS="$wx_cv_[]_AC_LANG_ABBREV[]_exto $CFLAGS"
+ fi
+ if test "[]_AC_LANG_ABBREV[]" = "cxx"; then
+ CXXFLAGS="$wx_cv_[]_AC_LANG_ABBREV[]_exto $CXXFLAGS"
+ fi
+fi
+]) dnl AC_DEFUN
+
+
+dnl ===========================================================================
+dnl Macros to do all of the compiler detections as one macro
+dnl ===========================================================================
+AC_DEFUN([AC_BAKEFILE_PROG_CC],
+[
+ AC_PROG_CC
+ AC_BAKEFILE_METROWERKS_EXTO
+ dnl By the time we find out that we need -ext o some tests have failed.
+ if test "x$wx_cv_c_exto" '!=' "x"; then
+ unset ac_cv_prog_cc_g
+ _AC_PROG_CC_G
+ fi
+ AC_BAKEFILE_PROG_MWCC
+ AC_BAKEFILE_PROG_XLCC
+ AC_BAKEFILE_PROG_SUNCC
+])
+
+AC_DEFUN([AC_BAKEFILE_PROG_CXX],
+[
+ AC_PROG_CXX
+ AC_BAKEFILE_METROWERKS_EXTO
+ dnl By the time we find out that we need -ext o some tests have failed.
+ if test "x$wx_cv_cxx_exto" '!=' "x"; then
+ unset ac_cv_prog_cxx_g
+ _AC_PROG_CXX_G
+ fi
+ AC_BAKEFILE_PROG_MWCXX
+ AC_BAKEFILE_PROG_XLCXX
+ AC_BAKEFILE_PROG_SUNCXX
+])
+
+
+# Configure paths for GTK+
+# Owen Taylor 1997-2001
+
+dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES,
+dnl pass to pkg-config
+dnl
+AC_DEFUN([AM_PATH_GTK_2_0],
[dnl
-dnl Get the cflags and libraries from the gtk-config script
+dnl Get the cflags and libraries from pkg-config
dnl
-AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
- gtk_config_prefix="$withval", gtk_config_prefix="")
-AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
- gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
-AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
+AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program],
, enable_gtktest=yes)
+ pkg_config_args=gtk+-2.0
for module in . $4
do
case "$module" in
gthread)
- gtk_config_args="$gtk_config_args gthread"
+ pkg_config_args="$pkg_config_args gthread-2.0"
;;
esac
done
- if test x$gtk_config_exec_prefix != x ; then
- gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
- fi
+ no_gtk=""
+
+ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+
+ if test x$PKG_CONFIG != xno ; then
+ if pkg-config --atleast-pkgconfig-version 0.7 ; then
+ :
+ else
+ echo "*** pkg-config too old; version 0.7 or better required."
+ no_gtk=yes
+ PKG_CONFIG=no
+ fi
+ else
+ no_gtk=yes
fi
- if test x$gtk_config_prefix != x ; then
- gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
- fi
+
+ min_gtk_version=ifelse([$1], ,2.0.0,$1)
+ AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)
+
+ if test x$PKG_CONFIG != xno ; then
+ ## don't try to run the test against uninstalled libtool libs
+ if $PKG_CONFIG --uninstalled $pkg_config_args; then
+ echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
+ enable_gtktest=no
+ fi
+
+ if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
+ :
+ else
+ no_gtk=yes
+ fi
fi
- AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
- min_gtk_version=ifelse([$1], ,0.99.7,$1)
- AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
- no_gtk=""
- if test "$GTK_CONFIG" = "no" ; then
- no_gtk=yes
- else
- GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
- GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
- gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
+ if test x"$no_gtk" = x ; then
+ GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
+ GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
+ gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
+ gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
+ gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$GTK_LIBS $LIBS"
dnl
-dnl Now check if the installed GTK is sufficiently new. (Also sanity
-dnl checks the results of gtk-config to some extent
+dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
+dnl checks the results of pkg-config to some extent)
dnl
rm -f conf.gtktest
AC_TRY_RUN([
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
- printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf ("*** was found! If gtk-config was correct, then it is best\n");
+ printf ("*** was found! If pkg-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
- printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
- printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
+ printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
+ printf("*** to point to the correct configuration files\n");
}
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
(gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
printf("*** library (version %d.%d.%d)\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
}
-#endif /* defined (GTK_MAJOR_VERSION) ... */
else
{
if ((gtk_major_version > major) ||
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
+ printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
- printf("*** correct copy of gtk-config. (In this case, you will have to\n");
+ printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
+ printf("*** correct copy of pkg-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
fi
fi
if test "x$no_gtk" = x ; then
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
- if test "$GTK_CONFIG" = "no" ; then
- echo "*** The gtk-config script installed by GTK could not be found"
- echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GTK_CONFIG environment variable to the"
- echo "*** full path to gtk-config."
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** A new enough version of pkg-config was not found."
+ echo "*** See http://pkgconfig.sourceforge.net"
else
if test -f conf.gtktest ; then
:
else
- echo "*** Could not run GTK test program, checking why..."
+ echo "*** Could not run GTK+ test program, checking why..."
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
AC_TRY_LINK([
#include <stdio.h>
], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GTK or finding the wrong"
- echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+ echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
+ echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
- echo "*** rpm --erase --nodeps gtk gtk-devel" ],
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GTK was incorrectly installed"
- echo "*** or that you have moved GTK since it was installed. In the latter case, you"
- echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
+ echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
rm -f conf.gtktest
])
-dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+# Configure paths for GTK+
+# Owen Taylor 97-11-3
+
+dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
dnl
-AC_DEFUN(AM_PATH_GTK_2_0,
-[dnl
-dnl Get the cflags and libraries from the gtk-config-2.0 script
+AC_DEFUN(AM_PATH_GTK,
+[dnl
+dnl Get the cflags and libraries from the gtk-config script
dnl
AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
gtk_config_prefix="$withval", gtk_config_prefix="")
AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
- , enable_gtktest=yes)
+ , enable_gtktest=yes)
for module in . $4
do
case "$module" in
- gthread)
+ gthread)
gtk_config_args="$gtk_config_args gthread"
;;
esac
if test x$gtk_config_exec_prefix != x ; then
gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
- if test x${GTK_CONFIG_2_0+set} != xset ; then
- GTK_CONFIG_2_0=$gtk_config_exec_prefix/bin/gtk-config-2.0
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
fi
fi
if test x$gtk_config_prefix != x ; then
gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
- if test x${GTK_CONFIG_2_0+set} != xset ; then
- GTK_CONFIG_2_0=$gtk_config_prefix/bin/gtk-config-2.0
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
fi
fi
- AC_PATH_PROG(GTK_CONFIG_2_0, gtk-config-2.0, no)
- min_gtk_version=ifelse([$1], ,1.3.1,$1)
+ AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
+ min_gtk_version=ifelse([$1], ,0.99.7,$1)
AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
no_gtk=""
- if test "$GTK_CONFIG_2_0" = "no" ; then
+ if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
else
- GTK_CFLAGS=`$GTK_CONFIG_2_0 $gtk_config_args --cflags`
- GTK_LIBS=`$GTK_CONFIG_2_0 $gtk_config_args --libs`
- gtk_config_major_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
+ GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
+ gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gtk_config_minor_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- gtk_config_micro_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK is sufficiently new. (Also sanity
-dnl checks the results of gtk-config-2.0 to some extent
+dnl checks the results of gtk-config to some extent
dnl
rm -f conf.gtktest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
-int
+int
main ()
{
int major, minor, micro;
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
- printf("\n*** 'gtk-config-2.0 --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf ("*** was found! If gtk-config-2.0 was correct, then it is best\n");
+ printf ("*** was found! If gtk-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
- printf("*** If gtk-config-2.0 was wrong, set the environment variable GTK_CONFIG_2_0\n");
- printf("*** to point to the correct copy of gtk-config-2.0, and remove the file config.cache\n");
+ printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
+ printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
- }
+ }
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
- (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
- GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
}
#endif /* defined (GTK_MAJOR_VERSION) ... */
else
printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
- major, minor, micro);
+ major, minor, micro);
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the gtk-config-2.0 shell script is\n");
+ printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GTK+, but you can also set the GTK_CONFIG_2_0 environment to point to the\n");
- printf("*** correct copy of gtk-config-2.0. (In this case, you will have to\n");
+ printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
+ printf("*** correct copy of gtk-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
fi
fi
if test "x$no_gtk" = x ; then
- AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
- ifelse([$2], , :, [$2])
+ AC_MSG_RESULT(yes)
+ ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
- if test "$GTK_CONFIG_2_0" = "no" ; then
- echo "*** The gtk-config-2.0 script installed by GTK could not be found"
+ if test "$GTK_CONFIG" = "no" ; then
+ echo "*** The gtk-config script installed by GTK could not be found"
echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GTK_CONFIG_2_0 environment variable to the"
- echo "*** full path to gtk-config-2.0."
+ echo "*** your path, or set the GTK_CONFIG environment variable to the"
+ echo "*** full path to gtk-config."
else
if test -f conf.gtktest ; then
:
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
- echo "***"
+ echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GTK was incorrectly installed"
echo "*** or that you have moved GTK since it was installed. In the latter case, you"
- echo "*** may want to edit the gtk-config-2.0 script: $GTK_CONFIG_2_0" ])
+ echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
])
+dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
+dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
+dnl also defines GSTUFF_PKG_ERRORS on error
+AC_DEFUN(PKG_CHECK_MODULES, [
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ AC_MSG_CHECKING(for $2)
+
+ if $PKG_CONFIG --exists "$2" ; then
+ AC_MSG_RESULT(yes)
+ succeeded=yes
+
+ AC_MSG_CHECKING($1_CFLAGS)
+ $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
+ AC_MSG_RESULT($$1_CFLAGS)
+
+ AC_MSG_CHECKING($1_LIBS)
+ $1_LIBS=`$PKG_CONFIG --libs "$2"`
+ AC_MSG_RESULT($$1_LIBS)
+ else
+ $1_CFLAGS=""
+ $1_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+ ifelse([$4], ,echo $$1_PKG_ERRORS,)
+ fi
+
+ AC_SUBST($1_CFLAGS)
+ AC_SUBST($1_LIBS)
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+ ifelse([$3], , :, [$3])
+ else
+ ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
+ fi
+])
+
+
+
+# Configure paths for SDL
+# Sam Lantinga 9/21/99
+# stolen from Manish Singh
+# stolen back from Frank Belew
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
+dnl
+AC_DEFUN([AM_PATH_SDL],
+[dnl
+dnl Get the cflags and libraries from the sdl-config script
+dnl
+AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)],
+ sdl_prefix="$withval", sdl_prefix="")
+AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
+ sdl_exec_prefix="$withval", sdl_exec_prefix="")
+AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program],
+ , enable_sdltest=yes)
+
+ if test x$sdl_exec_prefix != x ; then
+ sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
+ if test x${SDL_CONFIG+set} != xset ; then
+ SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
+ fi
+ fi
+ if test x$sdl_prefix != x ; then
+ sdl_args="$sdl_args --prefix=$sdl_prefix"
+ if test x${SDL_CONFIG+set} != xset ; then
+ SDL_CONFIG=$sdl_prefix/bin/sdl-config
+ fi
+ fi
+
+ AC_REQUIRE([AC_CANONICAL_TARGET])
+ PATH="$prefix/bin:$prefix/usr/bin:$PATH"
+ AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
+ min_sdl_version=ifelse([$1], ,0.11.0,$1)
+ AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
+ no_sdl=""
+ if test "$SDL_CONFIG" = "no" ; then
+ no_sdl=yes
+ else
+ SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
+ SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
+
+ sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+ if test "x$enable_sdltest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_CXXFLAGS="$CXXFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $SDL_CFLAGS"
+ CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+ LIBS="$LIBS $SDL_LIBS"
+dnl
+dnl Now check if the installed SDL is sufficiently new. (Also sanity
+dnl checks the results of sdl-config to some extent
+dnl
+ rm -f conf.sdltest
+ AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "SDL.h"
+
+char*
+my_strdup (char *str)
+{
+ char *new_str;
+
+ if (str)
+ {
+ new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
+ strcpy (new_str, str);
+ }
+ else
+ new_str = NULL;
+
+ return new_str;
+}
+
+int main (int argc, char *argv[])
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ /* This hangs on some systems (?)
+ system ("touch conf.sdltest");
+ */
+ { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = my_strdup("$min_sdl_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_sdl_version");
+ exit(1);
+ }
+
+ if (($sdl_major_version > major) ||
+ (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
+ (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
+ printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
+ printf("*** best to upgrade to the required version.\n");
+ printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
+ printf("*** to point to the correct copy of sdl-config, and remove the file\n");
+ printf("*** config.cache before re-running configure\n");
+ return 1;
+ }
+}
+
+],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+ CFLAGS="$ac_save_CFLAGS"
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_sdl" = x ; then
+ AC_MSG_RESULT(yes)
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT(no)
+ if test "$SDL_CONFIG" = "no" ; then
+ echo "*** The sdl-config script installed by SDL could not be found"
+ echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the SDL_CONFIG environment variable to the"
+ echo "*** full path to sdl-config."
+ else
+ if test -f conf.sdltest ; then
+ :
+ else
+ echo "*** Could not run SDL test program, checking why..."
+ CFLAGS="$CFLAGS $SDL_CFLAGS"
+ CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+ LIBS="$LIBS $SDL_LIBS"
+ AC_TRY_LINK([
+#include <stdio.h>
+#include "SDL.h"
+
+int main(int argc, char *argv[])
+{ return 0; }
+#undef main
+#define main K_and_R_C_main
+], [ return 0; ],
+ [ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding SDL or finding the wrong"
+ echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+ [ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means SDL was incorrectly installed"
+ echo "*** or that you have moved SDL since it was installed. In the latter case, you"
+ echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
+ CFLAGS="$ac_save_CFLAGS"
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ SDL_CFLAGS=""
+ SDL_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+ AC_SUBST(SDL_CFLAGS)
+ AC_SUBST(SDL_LIBS)
+ rm -f conf.sdltest
+])
+
+dnl Perform a check for a GStreamer element using gst-inspect
+dnl Thomas Vander Stichele <thomas at apestaart dot org>
+dnl Last modification: 25/01/2005
+
+dnl AM_GST_ELEMENT_CHECK(ELEMENT-NAME, ACTION-IF-FOUND, ACTION-IF-NOT-FOUND)
+
+AC_DEFUN([AM_GST_ELEMENT_CHECK],
+[
+ if test "x$GST_INSPECT" == "x"; then
+ AC_CHECK_PROG(GST_INSPECT, gst-inspect, gst-inspect, [])
+ fi
+
+ if test "x$GST_INSPECT" != "x"; then
+ AC_MSG_CHECKING(GStreamer element $1)
+ if [ $GST_INSPECT $1 > /dev/null 2> /dev/null ]; then
+ AC_MSG_RESULT(found.)
+ $2
+ else
+ AC_MSG_RESULT(not found.)
+ $3
+ fi
+ fi
+])
+
+dnl ---------------------------------------------------------------------------
+dnl Support macros for makefiles generated by BAKEFILE.
+dnl ---------------------------------------------------------------------------
+
+dnl Lots of compiler & linker detection code contained here was taken from
+dnl wxWindows configure.in script (see http://www.wxwindows.org)
+
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_GNUMAKE
+dnl
+dnl Detects GNU make
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_GNUMAKE],
+[
+ dnl does make support "-include" (only GNU make does AFAIK)?
+ AC_CACHE_CHECK([if make is GNU make], bakefile_cv_prog_makeisgnu,
+ [
+ if ( ${SHELL-sh} -c "${MAKE-make} --version" 2> /dev/null |
+ egrep -s GNU > /dev/null); then
+ bakefile_cv_prog_makeisgnu="yes"
+ else
+ bakefile_cv_prog_makeisgnu="no"
+ fi
+ ])
+
+ if test "x$bakefile_cv_prog_makeisgnu" = "xyes"; then
+ IF_GNU_MAKE=""
+ else
+ IF_GNU_MAKE="#"
+ fi
+ AC_SUBST(IF_GNU_MAKE)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_PLATFORM
+dnl
+dnl Detects platform and sets PLATFORM_XXX variables accordingly
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_PLATFORM],
+[
+ PLATFORM_UNIX=0
+ PLATFORM_WIN32=0
+ PLATFORM_MSDOS=0
+ PLATFORM_MAC=0
+ PLATFORM_MACOS=0
+ PLATFORM_MACOSX=0
+ PLATFORM_OS2=0
+ PLATFORM_BEOS=0
+
+ if test "x$BAKEFILE_FORCE_PLATFORM" = "x"; then
+ case "${BAKEFILE_HOST}" in
+ *-*-cygwin* | *-*-mingw32* )
+ PLATFORM_WIN32=1
+ ;;
+ *-pc-msdosdjgpp )
+ PLATFORM_MSDOS=1
+ ;;
+ *-pc-os2_emx | *-pc-os2-emx )
+ PLATFORM_OS2=1
+ ;;
+ powerpc-*-darwin* )
+ PLATFORM_MAC=1
+ PLATFORM_MACOSX=1
+ ;;
+ *-*-beos* )
+ PLATFORM_BEOS=1
+ ;;
+ powerpc-apple-macos* )
+ PLATFORM_MAC=1
+ PLATFORM_MACOS=1
+ ;;
+ * )
+ PLATFORM_UNIX=1
+ ;;
+ esac
+ else
+ case "$BAKEFILE_FORCE_PLATFORM" in
+ win32 )
+ PLATFORM_WIN32=1
+ ;;
+ msdos )
+ PLATFORM_MSDOS=1
+ ;;
+ os2 )
+ PLATFORM_OS2=1
+ ;;
+ darwin )
+ PLATFORM_MAC=1
+ PLATFORM_MACOSX=1
+ ;;
+ unix )
+ PLATFORM_UNIX=1
+ ;;
+ beos )
+ PLATFORM_BEOS=1
+ ;;
+ * )
+ AC_MSG_ERROR([Unknown platform: $BAKEFILE_FORCE_PLATFORM])
+ ;;
+ esac
+ fi
+
+ AC_SUBST(PLATFORM_UNIX)
+ AC_SUBST(PLATFORM_WIN32)
+ AC_SUBST(PLATFORM_MSDOS)
+ AC_SUBST(PLATFORM_MAC)
+ AC_SUBST(PLATFORM_MACOS)
+ AC_SUBST(PLATFORM_MACOSX)
+ AC_SUBST(PLATFORM_OS2)
+ AC_SUBST(PLATFORM_BEOS)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_PLATFORM_SPECIFICS
+dnl
+dnl Sets misc platform-specific settings
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_PLATFORM_SPECIFICS],
+[
+ AC_ARG_ENABLE([omf], AS_HELP_STRING([--enable-omf],
+ [use OMF object format (OS/2)]),
+ [bk_os2_use_omf="$enableval"])
+
+ case "${BAKEFILE_HOST}" in
+ *-*-darwin* )
+ dnl For Unix to MacOS X porting instructions, see:
+ dnl http://fink.sourceforge.net/doc/porting/porting.html
+ CFLAGS="$CFLAGS -fno-common"
+ CXXFLAGS="$CXXFLAGS -fno-common"
+ ;;
+
+ *-pc-os2_emx | *-pc-os2-emx )
+ if test "x$bk_os2_use_omf" = "xyes" ; then
+ AR=emxomfar
+ RANLIB=:
+ LDFLAGS="-Zomf $LDFLAGS"
+ CFLAGS="-Zomf $CFLAGS"
+ CXXFLAGS="-Zomf $CXXFLAGS"
+ OS2_LIBEXT="lib"
+ else
+ OS2_LIBEXT="a"
+ fi
+ ;;
+
+ i*86-*-beos* )
+ LDFLAGS="-L/boot/develop/lib/x86 $LDFLAGS"
+ ;;
+ esac
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_SUFFIXES
+dnl
+dnl Detects shared various suffixes for shared libraries, libraries, programs,
+dnl plugins etc.
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_SUFFIXES],
+[
+ SO_SUFFIX="so"
+ SO_SUFFIX_MODULE="so"
+ EXEEXT=""
+ LIBPREFIX="lib"
+ LIBEXT=".a"
+ DLLPREFIX="lib"
+ DLLPREFIX_MODULE=""
+ DLLIMP_SUFFIX=""
+
+ case "${BAKEFILE_HOST}" in
+ *-hp-hpux* )
+ SO_SUFFIX="sl"
+ SO_SUFFIX_MODULE="sl"
+ ;;
+ *-*-aix* )
+ dnl quoting from
+ dnl http://www-1.ibm.com/servers/esdd/articles/gnu.html:
+ dnl Both archive libraries and shared libraries on AIX have an
+ dnl .a extension. This will explain why you can't link with an
+ dnl .so and why it works with the name changed to .a.
+ SO_SUFFIX="a"
+ SO_SUFFIX_MODULE="a"
+ ;;
+ *-*-cygwin* | *-*-mingw32* )
+ SO_SUFFIX="dll"
+ SO_SUFFIX_MODULE="dll"
+ DLLIMP_SUFFIX="dll.a"
+ EXEEXT=".exe"
+ DLLPREFIX=""
+ ;;
+ *-pc-msdosdjgpp )
+ EXEEXT=".exe"
+ DLLPREFIX=""
+ ;;
+ *-pc-os2_emx | *-pc-os2-emx )
+ SO_SUFFIX="dll"
+ SO_SUFFIX_MODULE="dll"
+ DLLIMP_SUFFIX=$OS2_LIBEXT
+ EXEEXT=".exe"
+ DLLPREFIX=""
+ LIBPREFIX=""
+ LIBEXT=".$OS2_LIBEXT"
+ ;;
+ powerpc-*-darwin* )
+ SO_SUFFIX="dylib"
+ SO_SUFFIX_MODULE="bundle"
+ ;;
+ esac
+
+ if test "x$DLLIMP_SUFFIX" = "x" ; then
+ DLLIMP_SUFFIX="$SO_SUFFIX"
+ fi
+
+ AC_SUBST(SO_SUFFIX)
+ AC_SUBST(SO_SUFFIX_MODULE)
+ AC_SUBST(DLLIMP_SUFFIX)
+ AC_SUBST(EXEEXT)
+ AC_SUBST(LIBPREFIX)
+ AC_SUBST(LIBEXT)
+ AC_SUBST(DLLPREFIX)
+ AC_SUBST(DLLPREFIX_MODULE)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_SHARED_LD
+dnl
+dnl Detects command for making shared libraries, substitutes SHARED_LD_CC
+dnl and SHARED_LD_CXX.
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_SHARED_LD],
+[
+ dnl the extra compiler flags needed for compilation of shared library
+ PIC_FLAG=""
+ if test "x$GCC" = "xyes"; then
+ dnl the switch for gcc is the same under all platforms
+ PIC_FLAG="-fPIC"
+ fi
+
+ dnl Defaults for GCC and ELF .so shared libs:
+ SHARED_LD_CC="\$(CC) -shared ${PIC_FLAG} -o"
+ SHARED_LD_CXX="\$(CXX) -shared ${PIC_FLAG} -o"
+
+ case "${BAKEFILE_HOST}" in
+ *-hp-hpux* )
+ dnl default settings are good for gcc but not for the native HP-UX
+ if test "x$GCC" != "xyes"; then
+ dnl no idea why it wants it, but it does
+ LDFLAGS="$LDFLAGS -L/usr/lib"
+
+ SHARED_LD_CC="${CC} -b -o"
+ SHARED_LD_CXX="${CXX} -b -o"
+ PIC_FLAG="+Z"
+ fi
+ ;;
+
+ *-*-linux* )
+ if test "x$GCC" != "xyes"; then
+ AC_CACHE_CHECK([for Intel compiler], bakefile_cv_prog_icc,
+ [
+ AC_TRY_COMPILE([],
+ [
+ #ifndef __INTEL_COMPILER
+ #error Not icc
+ #endif
+ ],
+ bakefile_cv_prog_icc=yes,
+ bakefile_cv_prog_icc=no
+ )
+ ])
+ if test "$bakefile_cv_prog_icc" = "yes"; then
+ PIC_FLAG="-KPIC"
+ fi
+ fi
+ ;;
+
+ *-*-solaris2* )
+ if test "x$GCC" != xyes ; then
+ SHARED_LD_CC="${CC} -G -o"
+ SHARED_LD_CXX="${CXX} -G -o"
+ PIC_FLAG="-KPIC"
+ fi
+ ;;
+
+ *-*-darwin* )
+ dnl Most apps benefit from being fully binded (its faster and static
+ dnl variables initialized at startup work).
+ dnl This can be done either with the exe linker flag -Wl,-bind_at_load
+ dnl or with a double stage link in order to create a single module
+ dnl "-init _wxWindowsDylibInit" not useful with lazy linking solved
+
+ dnl If using newer dev tools then there is a -single_module flag that
+ dnl we can use to do this, otherwise we'll need to use a helper
+ dnl script. Check the version of gcc to see which way we can go:
+ AC_CACHE_CHECK([for gcc 3.1 or later], wx_cv_gcc31, [
+ AC_TRY_COMPILE([],
+ [
+ #if (__GNUC__ < 3) || \
+ ((__GNUC__ == 3) && (__GNUC_MINOR__ < 1))
+ #error old gcc
+ #endif
+ ],
+ [
+ wx_cv_gcc31=yes
+ ],
+ [
+ wx_cv_gcc31=no
+ ]
+ )
+ ])
+ if test "$wx_cv_gcc31" = "no"; then
+ AC_BAKEFILE_CREATE_FILE_SHARED_LD_SH
+ chmod +x shared-ld-sh
+
+ dnl Use the shared-ld-sh helper script
+ SHARED_LD_CC="`pwd`/shared-ld-sh -dynamiclib -headerpad_max_install_names -o"
+ SHARED_LD_MODULE_CC="`pwd`/shared-ld-sh -bundle -headerpad_max_install_names -o"
+ SHARED_LD_CXX="$SHARED_LD_CC"
+ SHARED_LD_MODULE_CXX="$SHARED_LD_MODULE_CC"
+ else
+ dnl Use the -single_module flag and let the linker do it for us
+ SHARED_LD_CC="\${CC} -dynamiclib -single_module -headerpad_max_install_names -o"
+ SHARED_LD_MODULE_CC="\${CC} -bundle -single_module -headerpad_max_install_names -o"
+ SHARED_LD_CXX="\${CXX} -dynamiclib -single_module -headerpad_max_install_names -o"
+ SHARED_LD_MODULE_CXX="\${CXX} -bundle -single_module -headerpad_max_install_names -o"
+ fi
+
+ PIC_FLAG="-dynamic -fPIC"
+ ;;
+
+ *-*-aix* )
+ dnl default settings are ok for gcc
+ if test "x$GCC" != "xyes"; then
+ dnl the abs path below used to be hardcoded here so I guess it must
+ dnl be some sort of standard location under AIX?
+ AC_CHECK_PROG(AIX_CXX_LD, makeC++SharedLib,
+ makeC++SharedLib, /usr/lpp/xlC/bin/makeC++SharedLib)
+ dnl FIXME - what about makeCSharedLib?
+ SHARED_LD_CC="$AIX_CC_LD -p 0 -o"
+ SHARED_LD_CXX="$AIX_CXX_LD -p 0 -o"
+ fi
+ ;;
+
+ *-*-beos* )
+ dnl can't use gcc under BeOS for shared library creation because it
+ dnl complains about missing 'main'
+ SHARED_LD_CC="${LD} -nostart -o"
+ SHARED_LD_CXX="${LD} -nostart -o"
+ ;;
+
+ *-*-irix* )
+ dnl default settings are ok for gcc
+ if test "x$GCC" != "xyes"; then
+ PIC_FLAG="-KPIC"
+ fi
+ ;;
+
+ *-*-cygwin* | *-*-mingw32* )
+ PIC_FLAG=""
+ SHARED_LD_CC="\$(CC) -shared -o"
+ SHARED_LD_CXX="\$(CXX) -shared -o"
+ ;;
+
+ *-pc-os2_emx | *-pc-os2-emx )
+ SHARED_LD_CC="`pwd`/dllar.sh -libf INITINSTANCE -libf TERMINSTANCE -o"
+ SHARED_LD_CXX="`pwd`/dllar.sh -libf INITINSTANCE -libf TERMINSTANCE -o"
+ PIC_FLAG=""
+ AC_BAKEFILE_CREATE_FILE_DLLAR_SH
+ chmod +x dllar.sh
+ ;;
+
+ powerpc-apple-macos* | \
+ *-*-freebsd* | *-*-openbsd* | *-*-netbsd* | \
+ *-*-sunos4* | \
+ *-*-osf* | \
+ *-*-dgux5* | \
+ *-*-sysv5* | \
+ *-pc-msdosdjgpp )
+ dnl defaults are ok
+ ;;
+
+ *)
+ AC_MSG_ERROR(unknown system type $BAKEFILE_HOST.)
+ esac
+
+ if test "x$PIC_FLAG" != "x" ; then
+ PIC_FLAG="$PIC_FLAG -DPIC"
+ fi
+
+ if test "x$SHARED_LD_MODULE_CC" = "x" ; then
+ SHARED_LD_MODULE_CC="$SHARED_LD_CC"
+ fi
+ if test "x$SHARED_LD_MODULE_CXX" = "x" ; then
+ SHARED_LD_MODULE_CXX="$SHARED_LD_CXX"
+ fi
+
+ AC_SUBST(SHARED_LD_CC)
+ AC_SUBST(SHARED_LD_CXX)
+ AC_SUBST(SHARED_LD_MODULE_CC)
+ AC_SUBST(SHARED_LD_MODULE_CXX)
+ AC_SUBST(PIC_FLAG)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_SHARED_VERSIONS
+dnl
+dnl Detects linker options for attaching versions (sonames) to shared libs.
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_SHARED_VERSIONS],
+[
+ USE_SOVERSION=0
+ USE_SOVERLINUX=0
+ USE_SOVERSOLARIS=0
+ USE_SOSYMLINKS=0
+ USE_MACVERSION=0
+ SONAME_FLAG=
+
+ case "${BAKEFILE_HOST}" in
+ *-*-linux* | *-*-freebsd* )
+ SONAME_FLAG="-Wl,-soname,"
+ USE_SOVERSION=1
+ USE_SOVERLINUX=1
+ USE_SOSYMLINKS=1
+ ;;
+
+ *-*-solaris2* )
+ SONAME_FLAG="-h "
+ USE_SOVERSION=1
+ USE_SOVERSOLARIS=1
+ USE_SOSYMLINKS=1
+ ;;
+
+ *-*-darwin* )
+ USE_MACVERSION=1
+ USE_SOVERSION=1
+ USE_SOSYMLINKS=1
+ ;;
+ esac
+
+ AC_SUBST(USE_SOVERSION)
+ AC_SUBST(USE_SOVERLINUX)
+ AC_SUBST(USE_SOVERSOLARIS)
+ AC_SUBST(USE_MACVERSION)
+ AC_SUBST(USE_SOSYMLINKS)
+ AC_SUBST(SONAME_FLAG)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_DEPS
+dnl
+dnl Detects available C/C++ dependency tracking options
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_DEPS],
+[
+ AC_MSG_CHECKING([for dependency tracking method])
+ DEPS_TRACKING=0
+
+ if test "x$GCC" = "xyes"; then
+ DEPSMODE=gcc
+ DEPS_TRACKING=1
+ case "${BAKEFILE_HOST}" in
+ powerpc-*-darwin* )
+ dnl -cpp-precomp (the default) conflicts with -MMD option
+ dnl used by bk-deps (see also http://developer.apple.com/documentation/Darwin/Conceptual/PortingUnix/compiling/chapter_4_section_3.html)
+ DEPSFLAG_GCC="-no-cpp-precomp -MMD"
+ ;;
+ * )
+ DEPSFLAG_GCC="-MMD"
+ ;;
+ esac
+ AC_MSG_RESULT([gcc])
+ elif test "x$MWCC" = "xyes"; then
+ DEPSMODE=mwcc
+ DEPS_TRACKING=1
+ DEPSFLAG_MWCC="-MM"
+ AC_MSG_RESULT([mwcc])
+ elif test "x$SUNCC" = "xyes"; then
+ DEPSMODE=suncc
+ DEPS_TRACKING=1
+ DEPSFLAG_SUNCC="-xM1"
+ AC_MSG_RESULT([suncc])
+ else
+ AC_MSG_RESULT([none])
+ fi
+
+ if test $DEPS_TRACKING = 1 ; then
+ AC_BAKEFILE_CREATE_FILE_BK_DEPS
+ chmod +x bk-deps
+ fi
+
+ AC_SUBST(DEPS_TRACKING)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_CHECK_BASIC_STUFF
+dnl
+dnl Checks for presence of basic programs, such as C and C++ compiler, "ranlib"
+dnl or "install"
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_CHECK_BASIC_STUFF],
+[
+ AC_PROG_RANLIB
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
+
+ AC_PROG_MAKE_SET
+ AC_SUBST(MAKE_SET)
+
+ AC_CHECK_TOOL(AR, ar, ar)
+ AC_CHECK_TOOL(STRIP, strip, :)
+ AC_CHECK_TOOL(NM, nm, :)
+
+ case ${BAKEFILE_HOST} in
+ *-hp-hpux* )
+ dnl HP-UX install doesn't handle the "-d" switch so don't
+ dnl use it there
+ INSTALL_DIR="mkdir -p"
+ ;;
+ *) INSTALL_DIR="$INSTALL -d"
+ ;;
+ esac
+ AC_SUBST(INSTALL_DIR)
+
+ LDFLAGS_GUI=
+ case ${BAKEFILE_HOST} in
+ *-*-cygwin* | *-*-mingw32* )
+ LDFLAGS_GUI="-mwindows"
+ esac
+ AC_SUBST(LDFLAGS_GUI)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_RES_COMPILERS
+dnl
+dnl Checks for presence of resource compilers for win32 or mac
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_RES_COMPILERS],
+[
+ RESCOMP=
+ SETFILE=
+
+ case ${BAKEFILE_HOST} in
+ *-*-cygwin* | *-*-mingw32* )
+ dnl Check for win32 resources compiler:
+ if test "$build" != "$host" ; then
+ RESCOMP=$host_alias-windres
+ else
+ AC_CHECK_PROG(RESCOMP, windres, windres, windres)
+ fi
+ ;;
+
+ *-*-darwin* | powerpc-apple-macos* )
+ AC_CHECK_PROG(RESCOMP, Rez, Rez, /Developer/Tools/Rez)
+ AC_CHECK_PROG(SETFILE, SetFile, SetFile, /Developer/Tools/SetFile)
+ ;;
+ esac
+
+ AC_SUBST(RESCOMP)
+ AC_SUBST(SETFILE)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_PRECOMP_HEADERS
+dnl
+dnl Check for precompiled headers support (GCC >= 3.4)
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_PRECOMP_HEADERS],
+[
+
+ AC_ARG_ENABLE([precomp-headers],
+ AS_HELP_STRING([--disable-precomp-headers],
+ [don't use precompiled headers even if compiler can]),
+ [bk_use_pch="$enableval"])
+
+ GCC_PCH=0
+
+ if test "x$bk_use_pch" = "x" -o "x$bk_use_pch" = "xyes" ; then
+ if test "x$GCC" = "xyes"; then
+ dnl test if we have gcc-3.4:
+ AC_MSG_CHECKING([if the compiler supports precompiled headers])
+ AC_TRY_COMPILE([],
+ [
+ #if !defined(__GNUC__) || !defined(__GNUC_MINOR__)
+ #error "no pch support"
+ #endif
+ #if (__GNUC__ < 3)
+ #error "no pch support"
+ #endif
+ #if (__GNUC__ == 3) && \
+ ((!defined(__APPLE_CC__) && (__GNUC_MINOR__ < 4)) || \
+ ( defined(__APPLE_CC__) && (__GNUC_MINOR__ < 3)))
+ #error "no pch support"
+ #endif
+ ],
+ [
+ AC_MSG_RESULT([yes])
+ GCC_PCH=1
+ ],
+ [
+ AC_MSG_RESULT([no])
+ ])
+ if test $GCC_PCH = 1 ; then
+ AC_BAKEFILE_CREATE_FILE_BK_MAKE_PCH
+ chmod +x bk-make-pch
+ fi
+ fi
+ fi
+
+ AC_SUBST(GCC_PCH)
+])
+
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE([autoconf_inc.m4 inclusion])
+dnl
+dnl To be used in configure.in of any project using Bakefile-generated mks
+dnl
+dnl Behaviour can be modified by setting following variables:
+dnl BAKEFILE_CHECK_BASICS set to "no" if you don't want bakefile to
+dnl to perform check for basic tools like ranlib
+dnl BAKEFILE_HOST set this to override host detection, defaults
+dnl to ${host}
+dnl BAKEFILE_FORCE_PLATFORM set to override platform detection
+dnl
+dnl Example usage:
+dnl
+dnl AC_BAKEFILE([FOO(autoconf_inc.m4)])
+dnl
+dnl (replace FOO with m4_include above, aclocal would die otherwise)
+dnl (yes, it's ugly, but thanks to a bug in aclocal, it's the only thing
+dnl we can do...)
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE],
+[
+ AC_PREREQ(2.58)
+
+ if test "x$BAKEFILE_HOST" = "x"; then
+ BAKEFILE_HOST="${host}"
+ fi
+
+ if test "x$BAKEFILE_CHECK_BASICS" != "xno"; then
+ AC_BAKEFILE_CHECK_BASIC_STUFF
+ fi
+ AC_BAKEFILE_GNUMAKE
+ AC_BAKEFILE_PLATFORM
+ AC_BAKEFILE_PLATFORM_SPECIFICS
+ AC_BAKEFILE_SUFFIXES
+ AC_BAKEFILE_SHARED_LD
+ AC_BAKEFILE_SHARED_VERSIONS
+ AC_BAKEFILE_DEPS
+ AC_BAKEFILE_RES_COMPILERS
+
+ BAKEFILE_BAKEFILE_M4_VERSION="0.1.8"
+
+ dnl includes autoconf_inc.m4:
+ $1
+
+ if test "$BAKEFILE_BAKEFILE_M4_VERSION" != "$BAKEFILE_AUTOCONF_INC_M4_VERSION" ; then
+ AC_MSG_ERROR([Versions of Bakefile used to generate makefiles ($BAKEFILE_AUTOCONF_INC_M4_VERSION) and configure ($BAKEFILE_BAKEFILE_M4_VERSION) do not match.])
+ fi
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl Embedded copies of helper scripts follow:
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AC_BAKEFILE_CREATE_FILE_DLLAR_SH],
+[
+dnl ===================== dllar.sh begins here =====================
+dnl (Created by merge-scripts.py from dllar.sh
+dnl file do not edit here!)
+D='$'
+cat <<EOF >dllar.sh
+#!/bin/sh
+#
+# dllar - a tool to build both a .dll and an .a file
+# from a set of object (.o) files for EMX/OS2.
+#
+# Written by Andrew Zabolotny, bit@freya.etu.ru
+# Ported to Unix like shell by Stefan Neis, Stefan.Neis@t-online.de
+#
+# This script will accept a set of files on the command line.
+# All the public symbols from the .o files will be exported into
+# a .DEF file, then linker will be run (through gcc) against them to
+# build a shared library consisting of all given .o files. All libraries
+# (.a) will be first decompressed into component .o files then act as
+# described above. You can optionally give a description (-d "description")
+# which will be put into .DLL. To see the list of accepted options (as well
+# as command-line format) simply run this program without options. The .DLL
+# is built to be imported by name (there is no guarantee that new versions
+# of the library you build will have same ordinals for same symbols).
+#
+# dllar is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# dllar is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with dllar; see the file COPYING. If not, write to the Free
+# Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# To successfuly run this program you will need:
+# - Current drive should have LFN support (HPFS, ext2, network, etc)
+# (Sometimes dllar generates filenames which won't fit 8.3 scheme)
+# - gcc
+# (used to build the .dll)
+# - emxexp
+# (used to create .def file from .o files)
+# - emximp
+# (used to create .a file from .def file)
+# - GNU text utilites (cat, sort, uniq)
+# used to process emxexp output
+# - GNU file utilities (mv, rm)
+# - GNU sed
+# - lxlite (optional, see flag below)
+# (used for general .dll cleanup)
+#
+
+flag_USE_LXLITE=1;
+
+#
+# helper functions
+# basnam, variant of basename, which does _not_ remove the path, _iff_
+# second argument (suffix to remove) is given
+basnam(){
+ case ${D}# in
+ 1)
+ echo ${D}1 | sed 's/.*\\///' | sed 's/.*\\\\//'
+ ;;
+ 2)
+ echo ${D}1 | sed 's/'${D}2'${D}//'
+ ;;
+ *)
+ echo "error in basnam ${D}*"
+ exit 8
+ ;;
+ esac
+}
+
+# Cleanup temporary files and output
+CleanUp() {
+ cd ${D}curDir
+ for i in ${D}inputFiles ; do
+ case ${D}i in
+ *!)
+ rm -rf \`basnam ${D}i !\`
+ ;;
+ *)
+ ;;
+ esac
+ done
+
+ # Kill result in case of failure as there is just to many stupid make/nmake
+ # things out there which doesn't do this.
+ if @<:@ ${D}# -eq 0 @:>@; then
+ rm -f ${D}arcFile ${D}arcFile2 ${D}defFile ${D}dllFile
+ fi
+}
+
+# Print usage and exit script with rc=1.
+PrintHelp() {
+ echo 'Usage: dllar.sh @<:@-o@<:@utput@:>@ output_file@:>@ @<:@-i@<:@mport@:>@ importlib_name@:>@'
+ echo ' @<:@-name-mangler-script script.sh@:>@'
+ echo ' @<:@-d@<:@escription@:>@ "dll descrption"@:>@ @<:@-cc "CC"@:>@ @<:@-f@<:@lags@:>@ "CFLAGS"@:>@'
+ echo ' @<:@-ord@<:@inals@:>@@:>@ -ex@<:@clude@:>@ "symbol(s)"'
+ echo ' @<:@-libf@<:@lags@:>@ "{INIT|TERM}{GLOBAL|INSTANCE}"@:>@ @<:@-nocrt@<:@dll@:>@@:>@ @<:@-nolxl@<:@ite@:>@@:>@'
+ echo ' @<:@*.o@:>@ @<:@*.a@:>@'
+ echo '*> "output_file" should have no extension.'
+ echo ' If it has the .o, .a or .dll extension, it is automatically removed.'
+ echo ' The import library name is derived from this and is set to "name".a,'
+ echo ' unless overridden by -import'
+ echo '*> "importlib_name" should have no extension.'
+ echo ' If it has the .o, or .a extension, it is automatically removed.'
+ echo ' This name is used as the import library name and may be longer and'
+ echo ' more descriptive than the DLL name which has to follow the old '
+ echo ' 8.3 convention of FAT.'
+ echo '*> "script.sh may be given to override the output_file name by a'
+ echo ' different name. It is mainly useful if the regular make process'
+ echo ' of some package does not take into account OS/2 restriction of'
+ echo ' DLL name lengths. It takes the importlib name as input and is'
+ echo ' supposed to procude a shorter name as output. The script should'
+ echo ' expect to get importlib_name without extension and should produce'
+ echo ' a (max.) 8 letter name without extension.'
+ echo '*> "cc" is used to use another GCC executable. (default: gcc.exe)'
+ echo '*> "flags" should be any set of valid GCC flags. (default: -s -Zcrtdll)'
+ echo ' These flags will be put at the start of GCC command line.'
+ echo '*> -ord@<:@inals@:>@ tells dllar to export entries by ordinals. Be careful.'
+ echo '*> -ex@<:@clude@:>@ defines symbols which will not be exported. You can define'
+ echo ' multiple symbols, for example -ex "myfunc yourfunc _GLOBAL*".'
+ echo ' If the last character of a symbol is "*", all symbols beginning'
+ echo ' with the prefix before "*" will be exclude, (see _GLOBAL* above).'
+ echo '*> -libf@<:@lags@:>@ can be used to add INITGLOBAL/INITINSTANCE and/or'
+ echo ' TERMGLOBAL/TERMINSTANCE flags to the dynamically-linked library.'
+ echo '*> -nocrt@<:@dll@:>@ switch will disable linking the library against emx''s'
+ echo ' C runtime DLLs.'
+ echo '*> -nolxl@<:@ite@:>@ switch will disable running lxlite on the resulting DLL.'
+ echo '*> All other switches (for example -L./ or -lmylib) will be passed'
+ echo ' unchanged to GCC at the end of command line.'
+ echo '*> If you create a DLL from a library and you do not specify -o,'
+ echo ' the basename for DLL and import library will be set to library name,'
+ echo ' the initial library will be renamed to 'name'_s.a (_s for static)'
+ echo ' i.e. "dllar gcc.a" will create gcc.dll and gcc.a, and the initial'
+ echo ' library will be renamed into gcc_s.a.'
+ echo '--------'
+ echo 'Example:'
+ echo ' dllar -o gcc290.dll libgcc.a -d "GNU C runtime library" -ord'
+ echo ' -ex "__main __ctordtor*" -libf "INITINSTANCE TERMINSTANCE"'
+ CleanUp
+ exit 1
+}
+
+# Execute a command.
+# If exit code of the commnad <> 0 CleanUp() is called and we'll exit the script.
+# @Uses Whatever CleanUp() uses.
+doCommand() {
+ echo "${D}*"
+ eval ${D}*
+ rcCmd=${D}?
+
+ if @<:@ ${D}rcCmd -ne 0 @:>@; then
+ echo "command failed, exit code="${D}rcCmd
+ CleanUp
+ exit ${D}rcCmd
+ fi
+}
+
+# main routine
+# setup globals
+cmdLine=${D}*
+outFile=""
+outimpFile=""
+inputFiles=""
+renameScript=""
+description=""
+CC=gcc.exe
+CFLAGS="-s -Zcrtdll"
+EXTRA_CFLAGS=""
+EXPORT_BY_ORDINALS=0
+exclude_symbols=""
+library_flags=""
+curDir=\`pwd\`
+curDirS=curDir
+case ${D}curDirS in
+*/)
+ ;;
+*)
+ curDirS=${D}{curDirS}"/"
+ ;;
+esac
+# Parse commandline
+libsToLink=0
+omfLinking=0
+while @<:@ ${D}1 @:>@; do
+ case ${D}1 in
+ -ord*)
+ EXPORT_BY_ORDINALS=1;
+ ;;
+ -o*)
+ shift
+ outFile=${D}1
+ ;;
+ -i*)
+ shift
+ outimpFile=${D}1
+ ;;
+ -name-mangler-script)
+ shift
+ renameScript=${D}1
+ ;;
+ -d*)
+ shift
+ description=${D}1
+ ;;
+ -f*)
+ shift
+ CFLAGS=${D}1
+ ;;
+ -c*)
+ shift
+ CC=${D}1
+ ;;
+ -h*)
+ PrintHelp
+ ;;
+ -ex*)
+ shift
+ exclude_symbols=${D}{exclude_symbols}${D}1" "
+ ;;
+ -libf*)
+ shift
+ library_flags=${D}{library_flags}${D}1" "
+ ;;
+ -nocrt*)
+ CFLAGS="-s"
+ ;;
+ -nolxl*)
+ flag_USE_LXLITE=0
+ ;;
+ -* | /*)
+ case ${D}1 in
+ -L* | -l*)
+ libsToLink=1
+ ;;
+ -Zomf)
+ omfLinking=1
+ ;;
+ *)
+ ;;
+ esac
+ EXTRA_CFLAGS=${D}{EXTRA_CFLAGS}" "${D}1
+ ;;
+ *.dll)
+ EXTRA_CFLAGS="${D}{EXTRA_CFLAGS} \`basnam ${D}1 .dll\`"
+ if @<:@ ${D}omfLinking -eq 1 @:>@; then
+ EXTRA_CFLAGS="${D}{EXTRA_CFLAGS}.lib"
+ else
+ EXTRA_CFLAGS="${D}{EXTRA_CFLAGS}.a"
+ fi
+ ;;
+ *)
+ found=0;
+ if @<:@ ${D}libsToLink -ne 0 @:>@; then
+ EXTRA_CFLAGS=${D}{EXTRA_CFLAGS}" "${D}1
+ else
+ for file in ${D}1 ; do
+ if @<:@ -f ${D}file @:>@; then
+ inputFiles="${D}{inputFiles} ${D}file"
+ found=1
+ fi
+ done
+ if @<:@ ${D}found -eq 0 @:>@; then
+ echo "ERROR: No file(s) found: "${D}1
+ exit 8
+ fi
+ fi
+ ;;
+ esac
+ shift
+done # iterate cmdline words
+
+#
+if @<:@ -z "${D}inputFiles" @:>@; then
+ echo "dllar: no input files"
+ PrintHelp
+fi
+
+# Now extract all .o files from .a files
+newInputFiles=""
+for file in ${D}inputFiles ; do
+ case ${D}file in
+ *.a | *.lib)
+ case ${D}file in
+ *.a)
+ suffix=".a"
+ AR="ar"
+ ;;
+ *.lib)
+ suffix=".lib"
+ AR="emxomfar"
+ EXTRA_CFLAGS="${D}EXTRA_CFLAGS -Zomf"
+ ;;
+ *)
+ ;;
+ esac
+ dirname=\`basnam ${D}file ${D}suffix\`"_%"
+ mkdir ${D}dirname
+ if @<:@ ${D}? -ne 0 @:>@; then
+ echo "Failed to create subdirectory ./${D}dirname"
+ CleanUp
+ exit 8;
+ fi
+ # Append '!' to indicate archive
+ newInputFiles="${D}newInputFiles ${D}{dirname}!"
+ doCommand "cd ${D}dirname; ${D}AR x ../${D}file"
+ cd ${D}curDir
+ found=0;
+ for subfile in ${D}dirname/*.o* ; do
+ if @<:@ -f ${D}subfile @:>@; then
+ found=1
+ if @<:@ -s ${D}subfile @:>@; then
+ # FIXME: This should be: is file size > 32 byte, _not_ > 0!
+ newInputFiles="${D}newInputFiles ${D}subfile"
+ fi
+ fi
+ done
+ if @<:@ ${D}found -eq 0 @:>@; then
+ echo "WARNING: there are no files in archive \\'${D}file\\'"
+ fi
+ ;;
+ *)
+ newInputFiles="${D}{newInputFiles} ${D}file"
+ ;;
+ esac
+done
+inputFiles="${D}newInputFiles"
+
+# Output filename(s).
+do_backup=0;
+if @<:@ -z ${D}outFile @:>@; then
+ do_backup=1;
+ set outFile ${D}inputFiles; outFile=${D}2
+fi
+
+# If it is an archive, remove the '!' and the '_%' suffixes
+case ${D}outFile in
+*_%!)
+ outFile=\`basnam ${D}outFile _%!\`
+ ;;
+*)
+ ;;
+esac
+case ${D}outFile in
+*.dll)
+ outFile=\`basnam ${D}outFile .dll\`
+ ;;
+*.DLL)
+ outFile=\`basnam ${D}outFile .DLL\`
+ ;;
+*.o)
+ outFile=\`basnam ${D}outFile .o\`
+ ;;
+*.obj)
+ outFile=\`basnam ${D}outFile .obj\`
+ ;;
+*.a)
+ outFile=\`basnam ${D}outFile .a\`
+ ;;
+*.lib)
+ outFile=\`basnam ${D}outFile .lib\`
+ ;;
+*)
+ ;;
+esac
+case ${D}outimpFile in
+*.a)
+ outimpFile=\`basnam ${D}outimpFile .a\`
+ ;;
+*.lib)
+ outimpFile=\`basnam ${D}outimpFile .lib\`
+ ;;
+*)
+ ;;
+esac
+if @<:@ -z ${D}outimpFile @:>@; then
+ outimpFile=${D}outFile
+fi
+defFile="${D}{outFile}.def"
+arcFile="${D}{outimpFile}.a"
+arcFile2="${D}{outimpFile}.lib"
+
+#create ${D}dllFile as something matching 8.3 restrictions,
+if @<:@ -z ${D}renameScript @:>@ ; then
+ dllFile="${D}outFile"
+else
+ dllFile=\`${D}renameScript ${D}outimpFile\`
+fi
+
+if @<:@ ${D}do_backup -ne 0 @:>@ ; then
+ if @<:@ -f ${D}arcFile @:>@ ; then
+ doCommand "mv ${D}arcFile ${D}{outFile}_s.a"
+ fi
+ if @<:@ -f ${D}arcFile2 @:>@ ; then
+ doCommand "mv ${D}arcFile2 ${D}{outFile}_s.lib"
+ fi
+fi
+
+# Extract public symbols from all the object files.
+tmpdefFile=${D}{defFile}_%
+rm -f ${D}tmpdefFile
+for file in ${D}inputFiles ; do
+ case ${D}file in
+ *!)
+ ;;
+ *)
+ doCommand "emxexp -u ${D}file >> ${D}tmpdefFile"
+ ;;
+ esac
+done
+
+# Create the def file.
+rm -f ${D}defFile
+echo "LIBRARY \`basnam ${D}dllFile\` ${D}library_flags" >> ${D}defFile
+dllFile="${D}{dllFile}.dll"
+if @<:@ ! -z ${D}description @:>@; then
+ echo "DESCRIPTION \\"${D}{description}\\"" >> ${D}defFile
+fi
+echo "EXPORTS" >> ${D}defFile
+
+doCommand "cat ${D}tmpdefFile | sort.exe | uniq.exe > ${D}{tmpdefFile}%"
+grep -v "^ *;" < ${D}{tmpdefFile}% | grep -v "^ *${D}" >${D}tmpdefFile
+
+# Checks if the export is ok or not.
+for word in ${D}exclude_symbols; do
+ grep -v ${D}word < ${D}tmpdefFile >${D}{tmpdefFile}%
+ mv ${D}{tmpdefFile}% ${D}tmpdefFile
+done
+
+
+if @<:@ ${D}EXPORT_BY_ORDINALS -ne 0 @:>@; then
+ sed "=" < ${D}tmpdefFile | \\
+ sed '
+ N
+ : loop
+ s/^\\(@<:@0-9@:>@\\+\\)\\(@<:@^;@:>@*\\)\\(;.*\\)\\?/\\2 @\\1 NONAME/
+ t loop
+ ' > ${D}{tmpdefFile}%
+ grep -v "^ *${D}" < ${D}{tmpdefFile}% > ${D}tmpdefFile
+else
+ rm -f ${D}{tmpdefFile}%
+fi
+cat ${D}tmpdefFile >> ${D}defFile
+rm -f ${D}tmpdefFile
+
+# Do linking, create implib, and apply lxlite.
+gccCmdl="";
+for file in ${D}inputFiles ; do
+ case ${D}file in
+ *!)
+ ;;
+ *)
+ gccCmdl="${D}gccCmdl ${D}file"
+ ;;
+ esac
+done
+doCommand "${D}CC ${D}CFLAGS -Zdll -o ${D}dllFile ${D}defFile ${D}gccCmdl ${D}EXTRA_CFLAGS"
+touch "${D}{outFile}.dll"
+
+doCommand "emximp -o ${D}arcFile ${D}defFile"
+if @<:@ ${D}flag_USE_LXLITE -ne 0 @:>@; then
+ add_flags="";
+ if @<:@ ${D}EXPORT_BY_ORDINALS -ne 0 @:>@; then
+ add_flags="-ynd"
+ fi
+ doCommand "lxlite -cs -t: -mrn -mln ${D}add_flags ${D}dllFile"
+fi
+doCommand "emxomf -s -l ${D}arcFile"
+
+# Successful exit.
+CleanUp 1
+exit 0
+EOF
+dnl ===================== dllar.sh ends here =====================
+])
+
+AC_DEFUN([AC_BAKEFILE_CREATE_FILE_BK_DEPS],
+[
+dnl ===================== bk-deps begins here =====================
+dnl (Created by merge-scripts.py from bk-deps
+dnl file do not edit here!)
+D='$'
+cat <<EOF >bk-deps
+#!/bin/sh
+
+# This script is part of Bakefile (http://bakefile.sourceforge.net) autoconf
+# script. It is used to track C/C++ files dependencies in portable way.
+#
+# Permission is given to use this file in any way.
+
+DEPSMODE=${DEPSMODE}
+DEPSDIR=.deps
+DEPSFLAG_GCC="${DEPSFLAG_GCC}"
+DEPSFLAG_MWCC="${DEPSFLAG_MWCC}"
+DEPSFLAG_SUNCC="${DEPSFLAG_SUNCC}"
+
+mkdir -p ${D}DEPSDIR
+
+if test ${D}DEPSMODE = gcc ; then
+ ${D}* ${D}{DEPSFLAG_GCC}
+ status=${D}?
+ if test ${D}{status} != 0 ; then
+ exit ${D}{status}
+ fi
+ # move created file to the location we want it in:
+ while test ${D}# -gt 0; do
+ case "${D}1" in
+ -o )
+ shift
+ objfile=${D}1
+ ;;
+ -* )
+ ;;
+ * )
+ srcfile=${D}1
+ ;;
+ esac
+ shift
+ done
+ depfile=\`basename ${D}srcfile | sed -e 's/\\..*${D}/.d/g'\`
+ depobjname=\`echo ${D}depfile |sed -e 's/\\.d/.o/g'\`
+ if test -f ${D}depfile ; then
+ sed -e "s,${D}depobjname:,${D}objfile:,g" ${D}depfile >${D}{DEPSDIR}/${D}{objfile}.d
+ rm -f ${D}depfile
+ else
+ depfile=\`basename ${D}objfile | sed -e 's/\\..*${D}/.d/g'\`
+ if test -f ${D}depfile ; then
+ sed -e "/^${D}objfile/!s,${D}depobjname:,${D}objfile:,g" ${D}depfile >${D}{DEPSDIR}/${D}{objfile}.d
+ rm -f ${D}depfile
+ fi
+ fi
+ exit 0
+elif test ${D}DEPSMODE = mwcc ; then
+ ${D}*
+ status=${D}?
+ if test ${D}{status} != 0 ; then
+ exit ${D}{status}
+ fi
+ # Run mwcc again with -MM and redirect into the dep file we want
+ # NOTE: We can't use shift here because we need ${D}* to be valid
+ prevarg=
+ for arg in ${D}* ; do
+ if test "${D}prevarg" = "-o"; then
+ objfile=${D}arg
+ else
+ case "${D}arg" in
+ -* )
+ ;;
+ * )
+ srcfile=${D}arg
+ ;;
+ esac
+ fi
+ prevarg="${D}arg"
+ done
+ ${D}* ${D}DEPSFLAG_MWCC >${D}{DEPSDIR}/${D}{objfile}.d
+ exit 0
+elif test ${D}DEPSMODE = suncc; then
+ ${D}* || exit
+ # Run compiler again with deps flag and redirect into the dep file.
+ # It doesn't work if the '-o FILE' option is used, but without it the
+ # dependency file will contain the wrong name for the object. So it is
+ # removed from the command line, and the dep file is fixed with sed.
+ cmd=""
+ while test ${D}# -gt 0; do
+ case "${D}1" in
+ -o )
+ shift
+ objfile=${D}1
+ ;;
+ * )
+ eval arg${D}#=\\${D}1
+ cmd="${D}cmd \\${D}arg${D}#"
+ ;;
+ esac
+ shift
+ done
+ eval "${D}cmd ${D}DEPSFLAG_SUNCC" | sed "s|.*:|${D}objfile:|" >${D}{DEPSDIR}/${D}{objfile}.d
+ exit 0
+else
+ ${D}*
+ exit ${D}?
+fi
+EOF
+dnl ===================== bk-deps ends here =====================
+])
+
+AC_DEFUN([AC_BAKEFILE_CREATE_FILE_SHARED_LD_SH],
+[
+dnl ===================== shared-ld-sh begins here =====================
+dnl (Created by merge-scripts.py from shared-ld-sh
+dnl file do not edit here!)
+D='$'
+cat <<EOF >shared-ld-sh
+#!/bin/sh
+#-----------------------------------------------------------------------------
+#-- Name: distrib/mac/shared-ld-sh
+#-- Purpose: Link a mach-o dynamic shared library for Darwin / Mac OS X
+#-- Author: Gilles Depeyrot
+#-- Copyright: (c) 2002 Gilles Depeyrot
+#-- Licence: any use permitted
+#-----------------------------------------------------------------------------
+
+verbose=0
+args=""
+objects=""
+linking_flag="-dynamiclib"
+
+while test ${D}# -gt 0; do
+ case ${D}1 in
+
+ -v)
+ verbose=1
+ ;;
+
+ -o|-compatibility_version|-current_version|-framework|-undefined|-install_name)
+ # collect these options and values
+ args="${D}{args} ${D}1 ${D}2"
+ shift
+ ;;
+
+ -l*|-L*|-Wl,*|-flat_namespace|-headerpad_max_install_names)
+ # collect these options
+ args="${D}{args} ${D}1"
+ ;;
+
+ -dynamiclib|-bundle)
+ linking_flag="${D}1"
+ ;;
+
+ -*)
+ echo "shared-ld: unhandled option '${D}1'"
+ exit 1
+ ;;
+
+ *.o | *.a | *.dylib)
+ # collect object files
+ objects="${D}{objects} ${D}1"
+ ;;
+
+ *)
+ echo "shared-ld: unhandled argument '${D}1'"
+ exit 1
+ ;;
+
+ esac
+ shift
+done
+
+#
+# Link one module containing all the others
+#
+if test ${D}{verbose} = 1; then
+ echo "c++ -r -keep_private_externs -nostdlib ${D}{objects} -o master.${D}${D}.o"
+fi
+c++ -r -keep_private_externs -nostdlib ${D}{objects} -o master.${D}${D}.o
+status=${D}?
+if test ${D}{status} != 0; then
+ exit ${D}{status}
+fi
+
+#
+# Link the shared library from the single module created
+#
+if test ${D}{verbose} = 1; then
+ echo "cc ${D}{linking_flag} master.${D}${D}.o ${D}{args}"
+fi
+c++ ${D}{linking_flag} master.${D}${D}.o ${D}{args}
+status=${D}?
+if test ${D}{status} != 0; then
+ exit ${D}{status}
+fi
+
+#
+# Remove intermediate module
+#
+rm -f master.${D}${D}.o
+
+exit 0
+EOF
+dnl ===================== shared-ld-sh ends here =====================
+])
+
+AC_DEFUN([AC_BAKEFILE_CREATE_FILE_BK_MAKE_PCH],
+[
+dnl ===================== bk-make-pch begins here =====================
+dnl (Created by merge-scripts.py from bk-make-pch
+dnl file do not edit here!)
+D='$'
+cat <<EOF >bk-make-pch
+#!/bin/sh
+
+# This script is part of Bakefile (http://bakefile.sourceforge.net) autoconf
+# script. It is used to generated precompiled headers.
+#
+# Permission is given to use this file in any way.
+
+outfile="${D}{1}"
+header="${D}{2}"
+shift
+shift
+
+compiler=
+headerfile=
+while test ${D}{#} -gt 0; do
+ case "${D}{1}" in
+ -I* )
+ incdir=\`echo ${D}{1} | sed -e 's/-I\\(.*\\)/\\1/g'\`
+ if test "x${D}{headerfile}" = "x" -a -f "${D}{incdir}/${D}{header}" ; then
+ headerfile="${D}{incdir}/${D}{header}"
+ fi
+ ;;
+ esac
+ compiler="${D}{compiler} ${D}{1}"
+ shift
+done
+
+if test "x${D}{headerfile}" = "x" ; then
+ echo "error: can't find header ${D}{header} in include paths" >2
+else
+ if test -f ${D}{outfile} ; then
+ rm -f ${D}{outfile}
+ else
+ mkdir -p \`dirname ${D}{outfile}\`
+ fi
+ depsfile=".deps/\`echo ${D}{outfile} | tr '/.' '__'\`.d"
+ mkdir -p .deps
+ # can do this because gcc is >= 3.4:
+ ${D}{compiler} -o ${D}{outfile} -MMD -MF "${D}{depsfile}" "${D}{headerfile}"
+ exit ${D}{?}
+fi
+EOF
+dnl ===================== bk-make-pch ends here =====================
+])
+
+dnl
+dnl AM_PATH_CPPUNIT(MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl
+AC_DEFUN(AM_PATH_CPPUNIT,
+[
+
+AC_ARG_WITH(cppunit-prefix,[ --with-cppunit-prefix=PFX Prefix where CppUnit is installed (optional)],
+ cppunit_config_prefix="$withval", cppunit_config_prefix="")
+AC_ARG_WITH(cppunit-exec-prefix,[ --with-cppunit-exec-prefix=PFX Exec prefix where CppUnit is installed (optional)],
+ cppunit_config_exec_prefix="$withval", cppunit_config_exec_prefix="")
+
+ if test x$cppunit_config_exec_prefix != x ; then
+ cppunit_config_args="$cppunit_config_args --exec-prefix=$cppunit_config_exec_prefix"
+ if test x${CPPUNIT_CONFIG+set} != xset ; then
+ CPPUNIT_CONFIG=$cppunit_config_exec_prefix/bin/cppunit-config
+ fi
+ fi
+ if test x$cppunit_config_prefix != x ; then
+ cppunit_config_args="$cppunit_config_args --prefix=$cppunit_config_prefix"
+ if test x${CPPUNIT_CONFIG+set} != xset ; then
+ CPPUNIT_CONFIG=$cppunit_config_prefix/bin/cppunit-config
+ fi
+ fi
+
+ AC_PATH_PROG(CPPUNIT_CONFIG, cppunit-config, no)
+ cppunit_version_min=$1
+
+ AC_MSG_CHECKING(for Cppunit - version >= $cppunit_version_min)
+ no_cppunit=""
+ if test "$CPPUNIT_CONFIG" = "no" ; then
+ no_cppunit=yes
+ else
+ CPPUNIT_CFLAGS=`$CPPUNIT_CONFIG --cflags`
+ CPPUNIT_LIBS=`$CPPUNIT_CONFIG --libs`
+ cppunit_version=`$CPPUNIT_CONFIG --version`
+
+ cppunit_major_version=`echo $cppunit_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ cppunit_minor_version=`echo $cppunit_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ cppunit_micro_version=`echo $cppunit_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+
+ cppunit_major_min=`echo $cppunit_version_min | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ cppunit_minor_min=`echo $cppunit_version_min | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ cppunit_micro_min=`echo $cppunit_version_min | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+
+ cppunit_version_proper=`expr \
+ $cppunit_major_version \> $cppunit_major_min \| \
+ $cppunit_major_version \= $cppunit_major_min \& \
+ $cppunit_minor_version \> $cppunit_minor_min \| \
+ $cppunit_major_version \= $cppunit_major_min \& \
+ $cppunit_minor_version \= $cppunit_minor_min \& \
+ $cppunit_micro_version \>= $cppunit_micro_min `
+
+ if test "$cppunit_version_proper" = "1" ; then
+ AC_MSG_RESULT([$cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version])
+ else
+ AC_MSG_RESULT(no)
+ no_cppunit=yes
+ fi
+ fi
+
+ if test "x$no_cppunit" = x ; then
+ ifelse([$2], , :, [$2])
+ else
+ CPPUNIT_CFLAGS=""
+ CPPUNIT_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+
+ AC_SUBST(CPPUNIT_CFLAGS)
+ AC_SUBST(CPPUNIT_LIBS)
+])
+
+
+
+
projects / wxWidgets.git / blobdiff