<wx/cmndata.h>
+\wxheading{Library}
+
+\helpref{wxCore}{librarieslist}
+
\wxheading{See also}
+\helpref{Printing framework overview}{printingoverview},
\helpref{wxPrintDialog}{wxprintdialog},
\helpref{wxPageSetupDialog}{wxpagesetupdialog},
\helpref{wxPrintDialogData}{wxprintdialogdata},
indicating the current resolution setting.
-\membersection{wxPrintData::Ok}\label{wxprintdataok}
+\membersection{wxPrintData::IsOk}\label{wxprintdataisok}
-\constfunc{bool}{Ok}{\void}
+\constfunc{bool}{IsOk}{\void}
Returns true if the print data is valid for using in print dialogs.
This can return false on Windows if the current printer is not set, for example.
\wxheading{Derived from}
\helpref{wxDialog}{wxdialog}\\
+\helpref{wxTopLevelWindow}{wxtoplevelwindow}\\
\helpref{wxWindow}{wxwindow}\\
\helpref{wxEvtHandler}{wxevthandler}\\
\helpref{wxObject}{wxobject}
<wx/printdlg.h>
+\wxheading{Library}
+
+\helpref{wxCore}{librarieslist}
+
\wxheading{See also}
+\helpref{Printing framework overview}{printingoverview},
\helpref{wxPrintDialog Overview}{wxprintdialogoverview}
\latexignore{\rtfignore{\wxheading{Members}}}
explicitly.
-\membersection{wxPrintDialog::Ok}\label{wxprintdialogok}
-
-\constfunc{bool}{Ok}{\void}
-
-Returns true if the print data associated with the dialog is valid.
-This can return false on Windows if the current printer is not set, for example.
-On all other platforms, it returns true.
-
-
\membersection{wxPrintDialog::ShowModal}\label{wxprintdialogshowmodal}
\func{int}{ShowModal}{\void}
<wx/cmndata.h>
+\wxheading{Library}
+
+\helpref{wxCore}{librarieslist}
+
\wxheading{See also}
-\helpref{wxPrintDialog}{wxprintdialog}, \helpref{wxPrintDialog Overview}{wxprintdialogoverview}
+\helpref{Printing framework overview}{printingoverview},
+\helpref{wxPrintDialog}{wxprintdialog},
+\helpref{wxPrintDialog Overview}{wxprintdialogoverview}
\latexignore{\rtfignore{\wxheading{Members}}}
Returns the {\it to} page number, as entered by the user.
-\membersection{wxPrintDialogData::Ok}\label{wxprintdialogdataok}
+\membersection{wxPrintDialogData::IsOk}\label{wxprintdialogdataisok}
-\constfunc{bool}{Ok}{\void}
+\constfunc{bool}{IsOk}{\void}
Returns true if the print data is valid for using in print dialogs.
This can return false on Windows if the current printer is not set, for example.
Determines whether the dialog to be shown will be the Print dialog
(pass false) or Print Setup dialog (pass true).
-Note that the setup dialog is (according to Microsoft) obsolete from
-Windows 95, though retained for backward compatibility.
-
+This function has been deprecated since version 2.5.4.
\membersection{wxPrintDialogData::SetToPage}\label{wxprintdialogdatasettopage}
\wxheading{See also}
-\helpref{Printing framework overview}{printingoverview}, \helpref{wxPrinterDC}{wxprinterdc}, \helpref{wxPrintDialog}{wxprintdialog},\rtfsp
-\helpref{wxPrintout}{wxprintout}, \helpref{wxPrintPreview}{wxprintpreview}.
+\helpref{Printing framework overview}{printingoverview},
+\helpref{wxPrinterDC}{wxprinterdc},
+\helpref{wxPrintDialog}{wxprintdialog},
+\helpref{wxPrintout}{wxprintout},
+\helpref{wxPrintPreview}{wxprintpreview}.
\latexignore{\rtfignore{\wxheading{Members}}}
\helpref{wxPrintData}{wxprintdata}
-\membersection{wxPrinter::\destruct{wxPrinter}}\label{wxprinterdtor}
-
-\func{}{\destruct{wxPrinter}}{\void}
-
-Destructor.
-
-
-\membersection{wxPrinter::Abort}\label{wxprinterabort}
-
-\func{bool}{Abort}{\void}
-
-Returns true if the user has aborted the print job.
-
\membersection{wxPrinter::CreateAbortWindow}\label{wxprintercreateabortwindow}
Creates the default printing abort window, with a cancel button.
+\membersection{wxPrinter::GetAbort}\label{wxprintergetabort}
+
+\func{bool}{GetAbort}{\void}
+
+Returns true if the user has aborted the print job.
+
\membersection{wxPrinter::GetLastError}\label{wxprintergetlasterror}
\section{\class{wxPrinterDC}}\label{wxprinterdc}
-A printer device context is specific to Windows, and allows access to
-any printer with a Windows driver. See \helpref{wxDC}{wxdc} for further information
-on device contexts, and \helpref{wxDC::GetSize}{wxdcgetsize} for advice on
-achieving the correct scaling for the page.
+A printer device context is specific to MSW and Mac, and allows access to any
+printer with a Windows or Macintosh driver. See \helpref{wxDC}{wxdc} for further
+information on device contexts, and \helpref{wxDC::GetSize}{wxdcgetsize} for
+advice on achieving the correct scaling for the page.
\wxheading{Derived from}
<wx/dcprint.h>
+\wxheading{Library}
+
+\helpref{wxCore}{librarieslist}
+
\wxheading{See also}
-\helpref{wxDC}{wxdc}, \helpref{Printing framework overview}{printingoverview}
+\helpref{Printing framework overview}{printingoverview},
+\helpref{wxDC}{wxdc}
\latexignore{\rtfignore{\wxheading{Members}}}
\func{}{wxPrinterDC}{\param{const wxPrintData\& }{printData}}
-Pass a \helpref{wxPrintData}{wxprintdata} object with information
+Constructor. Pass a \helpref{wxPrintData}{wxprintdata} object with information
necessary for setting up a suitable printer device context. This
-is the recommended way to construct a wxPrinterDC.
+is the recommended way to construct a wxPrinterDC. Make sure you
+specify a reference to a \helpref{wxPrintData}{wxprintdata} object,
+not a pointer - you may not even get a warning if you pass a pointer
+instead.
\func{}{wxPrinterDC}{\param{const wxString\& }{driver}, \param{const wxString\& }{device}, \param{const wxString\& }{output},
\param{const bool }{interactive = true}, \param{int }{orientation = wxPORTRAIT}}
This constructor is deprecated and retained only for backward compatibility.
+\membersection{wxPrinterDC::GetPaperRect}\label{wxprinterdcgetpaperrect}
+
+\func{wxRect}{wxPrinterDC::GetPaperRect}{}
+
+Return the rectangle in device coordinates that corresponds to the full paper
+area, including the nonprinting regions of the paper. The point (0,0) in device
+coordinates is the top left corner of the page rectangle, which is the printable
+area on MSW and Mac. The coordinates of the top left corner of the paper
+rectangle will therefore have small negative values, while the bottom right
+coordinates will be somewhat larger than the values returned by
+\helpref{wxDC::GetSize}{wxdcgetsize}.
+
+
\section{\class{wxPrintout}}\label{wxprintout}
-This class encapsulates the functionality of printing out an
-application document. A new class must be derived and members
-overridden to respond to calls such as OnPrintPage and HasPage.
-Instances of this class are passed to wxPrinter::Print or a
-wxPrintPreview object to initiate printing or previewing.
+This class encapsulates the functionality of printing out an application
+document. A new class must be derived and members overridden to respond to calls
+such as OnPrintPage and HasPage and to render the print image onto an associated
+\helpref{wxDC}{wxdc}. Instances of this class are passed to wxPrinter::Print or
+to a wxPrintPreview object to initiate printing or previewing.
+
+Your derived wxPrintout is responsible for drawing both the preview image and
+the printed page. If your windows' drawing routines accept an arbitrary DC as an
+argument, you can re-use those routines within your wxPrintout subclass to draw
+the printout image. You may also add additional drawing elements within your
+wxPrintout subclass, like headers, footers, and/or page numbers. However, the
+image on the printed page will often differ from the image drawn on the screen,
+as will the print preview image -- not just in the presence of headers and
+footers, but typically in scale. A high-resolution printer presents a much
+larger drawing surface (i.e., a higher-resolution DC); a zoomed-out preview
+image presents a much smaller drawing surface (lower-resolution DC). By using
+the routines FitThisSizeToXXX() and/or MapScreenSizeToXXX() within your
+wxPrintout subclass to set the user scale and origin of the associated DC, you
+can easily use a single drawing routine to draw on your application's windows,
+to create the print preview image, and to create the printed paper image, and
+achieve a common appearance to the preview image and the printed page.
+
\wxheading{Derived from}
\wxheading{See also}
-\helpref{Printing framework overview}{printingoverview}, \helpref{wxPrinterDC}{wxprinterdc}, \helpref{wxPrintDialog}{wxprintdialog},\rtfsp
-\helpref{wxPrinter}{wxprinter}, \helpref{wxPrintPreview}{wxprintpreview}
+\helpref{Printing framework overview}{printingoverview},
+\helpref{wxPrinterDC}{wxprinterdc},
+\helpref{wxPrintDialog}{wxprintdialog},
+\helpref{wxPageSetupDialog}{wxpagesetupdialog},
+\helpref{wxPrinter}{wxprinter},
+\helpref{wxPrintPreview}{wxprintpreview}
\latexignore{\rtfignore{\wxheading{Members}}}
\func{wxDC *}{GetDC}{\void}
Returns the device context associated with the printout (given to the printout at start of
-printing or previewing). This will be a wxPrinterDC if printing under Windows,
+printing or previewing). This will be a wxPrinterDC if printing under Windows or Mac,
a wxPostScriptDC if printing on other platforms, and a wxMemoryDC if previewing.
\func{void}{GetPageInfo}{\param{int *}{minPage}, \param{int *}{maxPage}, \param{int *}{pageFrom}, \param{int *}{pageTo}}
-Called by the framework to obtain information from the application about minimum and maximum page values that
-the user can select, and the required page range to be printed. By default this
-returns 1, 32000 for the page minimum and maximum values, and 1, 1 for the required page range.
+Called by the framework to obtain information from the application about minimum
+and maximum page values that the user can select, and the required page range to
+be printed. By default this returns 1, 32000 for the page minimum and maximum
+values, and 1, 1 for the required page range.
If {\it minPage} is zero, the page number controls in the print dialog will be disabled.
\func{void}{GetPageSizePixels}{\param{int *}{w}, \param{int *}{h}}
-Returns the size of the printer page in pixels. These may not be the
-same as the values returned from \helpref{wxDC::GetSize}{wxdcgetsize} if
-the printout is being used for previewing, since in this case, a
-memory device context is used, using a bitmap size reflecting the current
-preview zoom. The application must take this discrepancy into account if
-previewing is to be supported.
+Returns the size of the printer page in pixels, called the \em{page rectangle}.
+The page rectangle has a top left corner at (0,0) and a bottom right corner at
+(w,h). These values may not be the same as the values returned from
+\helpref{wxDC::GetSize}{wxdcgetsize}; if the printout is being used for
+previewing, a memory device context is used, which uses a bitmap size reflecting
+the current preview zoom. The application must take this discrepancy into
+account if previewing is to be supported.
\pythonnote{This method returns the output-only parameters as a tuple.}
2-element list {\tt ( w, h )}}
+\membersection{wxPrintout::GetPaperRectPixels}\label{wxprintoutgetpaperrectpixels}
+
+\func{wxRect}{GetPaperRectPixels}{}
+
+Returns the rectangle that corresponds to the entire paper in pixels, called the
+\em{paper rectangle}. This distinction between paper rectangle and page
+rectangle reflects the fact that most printers cannot print all the way to the
+edge of the paper. The page rectangle is a rectangle whose top left corner is at
+(0,0) and whose width and height are given by
+\helpref{wxDC::GetPageSizePixels}{wxprintoutgetpagesizepixels}. On MSW and Mac,
+the page rectangle gives the printable area of the paper, while the paper
+rectangle represents the entire paper, including non-printable borders. Thus,
+the rectangle returned by GetPaperRectPixels will have a top left corner whose
+coordinates are small negative numbers and the bottom right corner will have
+values somewhat larger than the width and height given by
+\helpref{wxDC::GetPageSizePixels}{wxprintoutgetpagesizepixels}. On other
+platforms and for PostScript printing, the paper is treated as if its entire
+area were printable, so this function will return the same rectangle as the page
+rectangle.
+
+
\membersection{wxPrintout::GetPPIPrinter}\label{wxprintoutgetppiprinter}
\func{void}{GetPPIPrinter}{\param{int *}{w}, \param{int *}{h}}
Returns the number of pixels per logical inch of the printer device context.
-Dividing the printer PPI by the screen PPI can give a suitable scaling
-factor for drawing text onto the printer. Remember to multiply
-this by a scaling factor to take the preview DC size into account.
+Dividing the printer PPI by the screen PPI can give a suitable scaling factor
+for drawing text onto the printer. Remember to multiply this by a scaling factor
+to take the preview DC size into account. Or you can just use the
+FitThisSizeToXXX() and MapScreenSizeToXXX routines below, which do most of the
+scaling calculations for you.
\pythonnote{This method returns the output-only parameters as a tuple.}
\func{void}{GetPPIScreen}{\param{int *}{w}, \param{int *}{h}}
Returns the number of pixels per logical inch of the screen device context.
-Dividing the printer PPI by the screen PPI can give a suitable scaling
-factor for drawing text onto the printer. Remember to multiply
-this by a scaling factor to take the preview DC size into account.
+Dividing the printer PPI by the screen PPI can give a suitable scaling factor
+for drawing text onto the printer. If you are doing your own scaling, remember
+to multiply this by a scaling factor to take the preview DC size into account.
\membersection{wxPrintout::GetTitle}\label{wxprintoutgettitle}
Returns true if the printout is currently being used for previewing.
+\membersection{wxPrintout::FitThisSizeToPaper}\label{wxprintoutfitthissizetopaper}
+
+\func{void}{FitThisSizeToPaper}{\param{const wxSize\& }{imageSize}}
+
+Set the user scale and device origin of the wxDC associated with this wxPrintout
+so that the given image size fits entirely within the paper and the origin is at
+the top left corner of the paper. Note that with most printers, the region
+around the edges of the paper are not printable so that the edges of the image
+could be cut off. Use this if you're managing your own page margins.
+
+\membersection{wxPrintout::FitThisSizeToPage}\label{wxprintoutfitthissizetopage}
+
+
+\func{void}{FitThisSizeToPage}{\param{const wxSize\& }{imageSize}}
+
+Set the user scale and device origin of the wxDC associated with this wxPrintout
+so that the given image size fits entirely within the page rectangle and the
+origin is at the top left corner of the page rectangle. On MSW and Mac, the page
+rectangle is the printable area of the page. On other platforms and PostScript
+printing, the page rectangle is the entire paper. Use this if you want your
+printed image as large as possible, but with the caveat that on some platforms,
+portions of the image might be cut off at the edges.
+
+
+\membersection{wxPrintout::FitThisSizeToPageMargins}\label{wxprintoutfitthissizetopagemargins}
+
+\func{void}{FitThisSizeToPageMargins}{\param{const wxSize\& }{imageSize}, \param{const wxPageSetupDialogData\& }{pageSetupData}}
+
+Set the user scale and device origin of the wxDC associated with this wxPrintout
+so that the given image size fits entirely within the page margins set in the
+given wxPageSetupDialogData object. This function provides the greatest
+consistency across all platforms because it does not depend on having access to
+the printable area of the paper. Note that on Mac, the native wxPageSetupDialog
+does not let you set the page margins; you'll have to provide your own mechanism,
+or you can use the Mac-only class wxMacPageMarginsDialog.
+
+
+\membersection{wxPrintout::MapScreenSizeToPaper}\label{wxprintoutmapscreensizetopaper}
+
+\func{void}{MapScreenSizeToPaper}{}
+
+Set the user scale and device origin of the wxDC associated with this wxPrintout
+so that the printed page matches the screen size as closely as possible
+and the logical origin is in the top left corner of the paper rectangle.
+That is,
+a 100-pixel object on screen should appear at the same size on the printed page. (It
+will, of course, be larger or smaller in the preview image, depending on the zoom
+factor.) Use this if you want WYSIWYG behavior, e.g., in a text editor.
+
+
+\membersection{wxPrintout::MapScreenSizeToPage}\label{wxprintoutmapscreensizetopage}
+
+\func{void}{MapScreenSizeToPage}{}
+
+This sets the user scale of the wxDC assocated with this wxPrintout to the same
+scale as \helpref{MapScreenSizeToPaper}{wxprintoutmapscreensizetopaper} but sets
+the logical origin to the top left corner of the page rectangle.
+
+
+\membersection{wxPrintout::MapScreenSizeToPageMargins}\label{wxprintoutmapscreensizetopagemargins}
+
+\func{void}{MapScreenSizeToPageMargins}{\param{const wxPageSetupDialogData\& }{pageSetupData}}
+
+This sets the user scale of the wxDC assocated with this wxPrintout to the same
+scale as
+\helpref{MapScreenSizeToPageMargins}{wxprintoutmapscreensizetopagemargins} but
+sets the logical origin to the top left corner of the page margins specified by
+the given wxPageSetupDialogData object.
+
+
+\membersection{wxPrintout::MapScreenSizeToDevice}\label{wxprintoutmapscreensizetodevice}
+
+\func{void}{MapScreenSizeToDevice}{}
+
+Set the user scale and device origin of the wxDC associated with this wxPrintout
+so that one screen pixel maps to one device pixel on the DC. That is, the user
+scale is set to (1,1) and the device origin is set to (0,0). Use this if you
+want to do your own scaling prior to calling wxDC drawing calls, for example, if
+your underlying model is floating-point and you want to achieve maximum drawing
+precision on high-resolution printers. (Note that while the underlying drawing
+model of Mac OS X is floating-point, wxWidgets's drawing model scales from integer
+coordinates.) You can use the GetLogicalXXXRect() routines below to obtain the
+paper rectangle, page rectangle, or page margins rectangle to perform your own scaling.
+
+
+\membersection{wxPrintout::GetLogicalPaperRect}\label{wxprintoutgetlogicalpaperrect}
+
+\func{wxRect}{GetLogicalPaperRect}{}
+
+Return the rectangle corresponding to the paper in the associated wxDC's
+logical coordinates for the current user scale and device origin.
+
+
+\membersection{wxPrintout::GetLogicalPageRect}\label{wxprintoutgetlogicalpagerect}
+
+\func{wxRect}{GetLogicalPageRect}{}
+
+Return the rectangle corresponding to the page in the associated wxDC's
+logical coordinates for the current user scale and device origin.
+On MSW and Mac, this will be the printable area of the paper. On other platforms
+and PostScript printing, this will be the full paper rectangle.
+
+
+\membersection{wxPrintout::GetLogicalPageMarginsRect}\label{wxprintoutgetlogicalpagemarginsrect}
+
+\func{wxRect}{GetLogicalPageMarginsRect}{\param{const wxPageSetupDialogData\& }{pageSetupData}}
+
+Return the rectangle corresponding to the page margins specified by the given
+wxPageSetupDialogData object in the associated wxDC's logical coordinates for the
+current user scale and device origin. The page margins are specified
+with respect to the edges of the paper on all platforms.
+
+
+\membersection{wxPrintout::SetLogicalOrigin}\label{wxprintoutsetlogicalorigin}
+
+\func{void}{SetLogicalOrigin}{\param{wxCoord }{x}, \param{wxCoord }{y}}
+
+Set the device origin of the associated wxDC so that the current logical point
+becomes the new logical origin.
+
+
+\membersection{wxPrintout::OffsetLogicalOrigin}\label{wxprintoutoffsetlogicalorigin}
+
+\func{void}{OffsetLogicalOrigin}{\param{wxCoord }{xoff}, \param{wxCoord }{yoff}}
+
+Shift the device origin by an amount specified in logical coordinates.
+
+
\membersection{wxPrintout::OnBeginDocument}\label{wxprintoutonbegindocument}
\func{bool}{OnBeginDocument}{\param{int}{ startPage}, \param{int}{ endPage}}
\wxheading{See also}
-\overview{Printing framework overview}{printingoverview}, \helpref{wxPrinterDC}{wxprinterdc}, \helpref{wxPrintDialog}{wxprintdialog},\rtfsp
-\helpref{wxPrintout}{wxprintout}, \helpref{wxPrinter}{wxprinter},\rtfsp
-\helpref{wxPreviewCanvas}{wxpreviewcanvas}, \helpref{wxPreviewControlBar}{wxpreviewcontrolbar},\rtfsp
+\overview{Printing framework overview}{printingoverview},
+\helpref{wxPrinterDC}{wxprinterdc},
+\helpref{wxPrintDialog}{wxprintdialog},
+\helpref{wxPrintout}{wxprintout},
+\helpref{wxPrinter}{wxprinter},
+\helpref{wxPreviewCanvas}{wxpreviewcanvas},
+\helpref{wxPreviewControlBar}{wxpreviewcontrolbar},
\helpref{wxPreviewFrame}{wxpreviewframe}.
\latexignore{\rtfignore{\wxheading{Members}}}
in your application.
-\membersection{wxPrintPreview::DrawBlankPage}\label{wxprintpreviewdrawblankpage}
-
-\func{bool}{DrawBlankPage}{\param{wxWindow* }{window}}
-
-Draws a representation of the blank page into the preview window. Used
-internally.
-
-
\membersection{wxPrintPreview::GetCanvas}\label{wxprintpreviewgetcanvas}
\func{wxPreviewCanvas* }{GetCanvas}{\void}
Returns the minimum page number.
-\membersection{wxPrintPreview::GetPrintData}\label{wxprintpreviewgetprintdata}
-
-\func{wxPrintData\&}{GetPrintData}{\void}
-
-Returns a reference to the internal print data.
-
-
\membersection{wxPrintPreview::GetPrintout}\label{wxprintpreviewgetprintout}
\func{wxPrintout *}{GetPrintout}{\void}
or NULL if none exists.
-\membersection{wxPrintPreview::Ok}\label{wxprintpreviewok}
+\membersection{wxPrintPreview::IsOk}\label{wxprintpreviewisok}
\func{bool}{Ok}{\void}
\membersection{wxPrintPreview::PaintPage}\label{wxprintpreviewpaintpage}
-\func{bool}{PaintPage}{\param{wxWindow* }{window}}
+\func{bool}{PaintPage}{\param{wxPreviewCanvas *}{canvas}, \param{wxDC& }{dc}}
This refreshes the preview window with the preview image.
It must be called from the preview window's OnPaint member.
\membersection{wxPrintPreview::SetCanvas}\label{wxprintpreviewsetcanvas}
-\func{void}{SetCanvas}{\param{wxPreviewCanvas** }{window}}
+\func{void}{SetCanvas}{\param{wxPreviewCanvas* }{window}}
Sets the window to be used for displaying the print preview image.
projects / wxWidgets.git / blobdiff