// Author: Hans Van Leemputten
// RCS-ID: $Id$
// Copyright: (c) 2004 Hans Van Leemputten
-// Licence: wxWidgets licence
+// Licence: wxWindows licence
///////////////////////////////////////////////////////////////////////////////
#ifndef _WX_TESTBSTREAM_H__
CPPUNIT_TEST_SUITE_NAMED_REGISTRATION( Name, COMPOSE_TEST_NAME(Name) ); \
STREAM_IMPLEMENT_SUB_REGISTRATION_ROUTINE( Name )
-
///////////////////////////////////////////////////////////////////////////////
// Template class that implements a test for all base stream functions.
//
:m_pCleanup(value)
{}
~CleanupHelper()
- {
+ {
m_pCleanup->DeleteInStream();
m_pCleanup->DeleteOutStream();
}
// Prevent mem leaks!
delete m_pCurrentIn;
delete m_pCurrentOut;
- }
+ }
protected:
/*
const TStreamIn &stream_in = CreateInStream();
CPPUNIT_ASSERT(!stream_in.Eof());
- // Size should be greater then zero.
+ // Size should be greater than zero.
// Note: streams not supporting this should register this test
// with CPPUNIT_TEST_FAIL instead of CPPUNIT_TEST.
CPPUNIT_ASSERT(stream_in.GetSize() != 0);
// Note: the input stream should at least be of min size +10!
- char buf[10];
+ char buf[10];
(void)stream_in.Read(buf, 10);
CPPUNIT_ASSERT(!stream_in.Eof());
CPPUNIT_ASSERT(stream_in.Eof());
}
- // Test and see what happens to the EOF when we
+ // Test and see what happens to the EOF when we
// read after EOF was encountered.
void Input_Eof()
{
// Travel to the end of the stream.
while(!stream_in.Eof())
{
+ CPPUNIT_ASSERT_MESSAGE( "unexpected non-EOF stream error",
+ stream_in.IsOk() );
+
// Read, we move one byte along.
(void)stream_in.GetC();
#if 0
}
// Check EOF stream state.
- CPPUNIT_ASSERT_MESSAGE("EOF is not EOF?", stream_in.Eof());
+ CPPUNIT_ASSERT_MESSAGE("EOF is not EOF?", stream_in.Eof());
- // Ok we found the end, lets see if we can go past it.
+ // Ok we found the end, let's see if we can go past it.
for (size_t i = 0; i < 100; i++)
(void)stream_in.GetC();
char buf[5];
(void)stream_in.Read(buf, 5);
- CPPUNIT_ASSERT(stream_in.LastRead() == 5);
+ CPPUNIT_ASSERT_EQUAL(5, stream_in.LastRead());
(void)stream_in.GetC();
- CPPUNIT_ASSERT(stream_in.LastRead() == 1);
+ CPPUNIT_ASSERT_EQUAL(1, stream_in.LastRead());
+ }
+
+ void Input_CanRead()
+ {
+ CleanupHelper cleanup(this);
+ TStreamIn &stream_in = CreateInStream();
+
+ CPPUNIT_ASSERT( stream_in.CanRead() );
+
+ // read the entire contents
+ (void)stream_in.Read(CreateOutStream());
+
+ CPPUNIT_ASSERT( !stream_in.CanRead() );
}
// Just try to perform a SeekI() on the input stream.
{
CleanupHelper cleanup(this);
TStreamIn &stream_in = CreateInStream();
+
+ CPPUNIT_ASSERT( stream_in.IsSeekable() );
CPPUNIT_ASSERT(!stream_in.Eof());
// Try to Seek in the stream...
// Note: streams not supporting this should register this test
// with CPPUNIT_TEST_FAIL instead of CPPUNIT_TEST.
- CPPUNIT_ASSERT(stream_in.SeekI(2, wxFromStart) == 2);
- CPPUNIT_ASSERT(stream_in.SeekI(2, wxFromCurrent) == 4);
+ CPPUNIT_ASSERT_EQUAL(2, stream_in.SeekI(2, wxFromStart));
+ CPPUNIT_ASSERT_EQUAL(4, stream_in.SeekI(2, wxFromCurrent));
// Not sure the following line is correct, so test it differently.
- //CPPUNIT_ASSERT(stream_in.SeekI(-2, wxFromEnd) == (off_t)stream_in.GetSize()-2);
+ //CPPUNIT_ASSERT_EQUAL(stream_in.GetSize()-2, stream_in.SeekI(-2, wxFromEnd));
CPPUNIT_ASSERT(stream_in.SeekI(-2, wxFromEnd) != wxInvalidOffset);
// Go beyond the stream size.
CPPUNIT_ASSERT((stream_in.SeekI(10, wxFromCurrent) == wxInvalidOffset) == m_bSeekInvalidBeyondEnd);
{
CleanupHelper cleanup(this);
TStreamIn &stream_in = CreateInStream();
+
CPPUNIT_ASSERT(!stream_in.Eof());
// Try to Get the location in the stream...
- CPPUNIT_ASSERT(stream_in.TellI() == 0);
+ CPPUNIT_ASSERT_EQUAL(0, stream_in.TellI());
(void)stream_in.GetC();
- CPPUNIT_ASSERT(stream_in.TellI() == 1);
+ CPPUNIT_ASSERT_EQUAL(1, stream_in.TellI());
if (!m_bSimpleTellITest)
{
wxFileOffset pos = stream_in.SeekI(5, wxFromStart);
- CPPUNIT_ASSERT(stream_in.TellI() == pos);
+ CPPUNIT_ASSERT_EQUAL(pos, stream_in.TellI());
(void)stream_in.GetC();
- CPPUNIT_ASSERT(stream_in.TellI() == 6);
+ CPPUNIT_ASSERT_EQUAL(6, stream_in.TellI());
pos = stream_in.SeekI(2, wxFromCurrent);
- CPPUNIT_ASSERT(stream_in.TellI() == pos);
+ CPPUNIT_ASSERT_EQUAL(pos, stream_in.TellI());
pos = stream_in.SeekI(5, wxFromStart);
- CPPUNIT_ASSERT(stream_in.TellI() == pos);
+ CPPUNIT_ASSERT_EQUAL(pos, stream_in.TellI());
}
}
-
+
// Just try to perform a Peek() on the input stream.
void Input_Peek()
{
char peekChar = stream_in.Peek();
char getChar = stream_in.GetC();
if (stream_in.LastRead() == 1)
- CPPUNIT_ASSERT(peekChar == getChar);
+ CPPUNIT_ASSERT_EQUAL(getChar, peekChar);
}
}
CleanupHelper cleanup(this);
TStreamIn &stream_in = CreateInStream();
CPPUNIT_ASSERT(!stream_in.Eof());
-
+
const char *ungetstr = "test";
size_t ungetsize = stream_in.Ungetch(ungetstr, strlen(ungetstr) + 1);
if (ungetsize != 0)
{
- CPPUNIT_ASSERT(ungetsize == strlen(ungetstr) + 1);
+ CPPUNIT_ASSERT_EQUAL(strlen(ungetstr) + 1, ungetsize);
char buf[10];
(void)stream_in.Read(buf, ungetsize);
CPPUNIT_ASSERT(strcmp(buf, ungetstr) == 0);
if (stream_in.Ungetch('a'))
{
- CPPUNIT_ASSERT(stream_in.GetC() == 'a');
+ CPPUNIT_ASSERT_EQUAL(int('a'), stream_in.GetC());
}
}
CleanupHelper cleanup(this);
TStreamOut &stream_out = CreateOutStream();
- char *buf = "Some text";
- int i;
- int len = strlen(buf);
- for (i = 0; i < len; i++)
+ const char *buf = "Some text";
+ const wxFileOffset len = strlen(buf);
+ for ( int i = 0; i < len; i++ )
stream_out.PutC(buf[i]);
- CPPUNIT_ASSERT(i == stream_out.TellO());
+ if ( stream_out.IsSeekable() )
+ CPPUNIT_ASSERT_EQUAL(len, stream_out.TellO());
}
// Just try to perform a Write() on the output stream.
TStreamOut &stream_out = CreateOutStream();
// Do the buffer version.
- char *buf = "Some text";
- int len = strlen(buf);
+ const char *buf = "Some text";
+ const wxFileOffset len = strlen(buf);
(void)stream_out.Write(buf, len);
- CPPUNIT_ASSERT(stream_out.TellO() == len);
+ if ( stream_out.IsSeekable() )
+ CPPUNIT_ASSERT_EQUAL( len, stream_out.TellO() );
// Do the Stream version.
TStreamIn &stream_in = CreateInStream();
(void)stream_out.Write(stream_in);
- CPPUNIT_ASSERT(stream_out.TellO() > len);
+
+ if ( stream_out.IsSeekable() )
+ CPPUNIT_ASSERT(stream_out.TellO() > len);
}
// Just try to perform a LastWrite() on the output stream.
CleanupHelper cleanup(this);
TStreamOut &stream_out = CreateOutStream();
- char *buf = "12345";
+ const char *buf = "12345";
(void)stream_out.Write(buf, 5);
- CPPUNIT_ASSERT(stream_out.LastWrite() == 5);
+ CPPUNIT_ASSERT_EQUAL(5, stream_out.LastWrite());
(void)stream_out.PutC('1');
- CPPUNIT_ASSERT(stream_out.LastWrite() == 1);
+ CPPUNIT_ASSERT_EQUAL(1, stream_out.LastWrite());
}
// Just try to perform a SeekO() on the output stream.
{
CleanupHelper cleanup(this);
TStreamOut &stream_out = CreateOutStream();
-
+
+ CPPUNIT_ASSERT( stream_out.IsSeekable() );
+
// First put some data in the stream, so it is not empty.
- char *buf = "1234567890";
+ const char *buf = "1234567890";
(void)stream_out.Write(buf, 10);
// Try to Seek in the stream...
// Note: streams not supporting this should register this test
// with CPPUNIT_TEST_FAIL instead of CPPUNIT_TEST.
- CPPUNIT_ASSERT(stream_out.SeekO(2, wxFromStart) == 2);
- CPPUNIT_ASSERT(stream_out.SeekO(2, wxFromCurrent) == 4);
+ CPPUNIT_ASSERT_EQUAL(2, stream_out.SeekO(2, wxFromStart));
+ CPPUNIT_ASSERT_EQUAL(4, stream_out.SeekO(2, wxFromCurrent));
// Not sure the following line is correct, so test it differently.
- //CPPUNIT_ASSERT(stream_out.SeekO(-2, wxFromEnd) == (off_t)stream_in.GetSize()-2);
+ //CPPUNIT_ASSERT_EQUAL(stream_in.GetSize()-2, stream_out.SeekO(-2, wxFromEnd));
CPPUNIT_ASSERT(stream_out.SeekO(-2, wxFromEnd) != wxInvalidOffset);
// Go beyond the stream size.
CPPUNIT_ASSERT((stream_out.SeekO(10, wxFromCurrent) == wxInvalidOffset) == m_bSeekInvalidBeyondEnd);
TStreamOut &stream_out = CreateOutStream();
// Try to Get the location in the stream...
- CPPUNIT_ASSERT(stream_out.TellO() == 0);
+ CPPUNIT_ASSERT_EQUAL(0, stream_out.TellO());
(void)stream_out.PutC('1');
- CPPUNIT_ASSERT(stream_out.TellO() == 1);
+ CPPUNIT_ASSERT_EQUAL(1, stream_out.TellO());
if (!m_bSimpleTellOTest)
{
// First put some extra data in the stream, so it's not empty.
- char *buf = "1234567890";
+ const char *buf = "1234567890";
(void)stream_out.Write(buf, 10);
-
- off_t pos = stream_out.SeekO(5, wxFromStart);
- CPPUNIT_ASSERT(stream_out.TellO() == pos);
+
+ wxFileOffset pos = stream_out.SeekO(5, wxFromStart);
+ CPPUNIT_ASSERT_EQUAL(pos, stream_out.TellO());
(void)stream_out.PutC('1');
- CPPUNIT_ASSERT(stream_out.TellO() == 6);
+ CPPUNIT_ASSERT_EQUAL(6, stream_out.TellO());
pos = stream_out.SeekO(2, wxFromCurrent);
- CPPUNIT_ASSERT(stream_out.TellO() == pos);
+ CPPUNIT_ASSERT_EQUAL(pos, stream_out.TellO());
pos = stream_out.SeekO(5, wxFromStart);
- CPPUNIT_ASSERT(stream_out.TellO() == pos);
+ CPPUNIT_ASSERT_EQUAL(pos, stream_out.TellO());
}
}
protected:
// Some tests can be configured... here you can find the config settings
- bool m_bSimpleTellITest; // if true, no SeekI will be used by the TellI test.
+ bool m_bSimpleTellITest; // if true, no SeekI will be used by the TellI test.
// Default false.
- bool m_bSimpleTellOTest; // if true, no SeekO will be used by the TellI test.
+ bool m_bSimpleTellOTest; // if true, no SeekO will be used by the TellI test.
// Default false.
bool m_bSeekInvalidBeyondEnd; // if true a SeekI|O beyond the end of the stream should return wxInvalidOffset
// Default true.
// Default true.
protected:
TStreamIn &CreateInStream()
- {
+ {
if (m_pCurrentIn)
{
- wxFAIL_MSG(_T("Error in test case, the previouse input stream needs to be delete first!"));
+ wxFAIL_MSG(wxT("Error in test case, the previouse input stream needs to be delete first!"));
}
m_pCurrentIn = DoCreateInStream();
return *m_pCurrentIn;
}
TStreamOut &CreateOutStream()
- {
+ {
if (m_pCurrentOut)
{
- wxFAIL_MSG(_T("Error in test case, the previouse output stream needs to be delete first!"));
+ wxFAIL_MSG(wxT("Error in test case, the previouse output stream needs to be delete first!"));
}
m_pCurrentOut = DoCreateOutStream();
wxASSERT(m_pCurrentOut != NULL);
return *m_pCurrentOut;
}
-
+
void DeleteInStream()
{
if (m_pCurrentIn == NULL)
return;
delete m_pCurrentIn;
m_pCurrentIn = NULL;
- // Incase something extra needs to be done.
+ // In case something extra needs to be done.
DoDeleteInStream();
}
void DeleteOutStream()
{
if (m_pCurrentOut == NULL)
return;
+
+ CPPUNIT_ASSERT(m_pCurrentOut->Close());
+
delete m_pCurrentOut;
m_pCurrentOut = NULL;
- // Incase something extra needs to be done.
+ // In case something extra needs to be done.
DoDeleteOutStream();
}
projects / wxWidgets.git / blobdiff