WX_ARG_ENABLE(optimise, [ --enable-optimise create optimised code], wxUSE_OPTIMISE)
WX_ARG_ENABLE(debug, [ --enable-debug same as debug_flag and debug_info], wxUSE_DEBUG)
-dnl allow the precompiled header option to be disabled under Mac OS X
-WX_ARG_ENABLE(precomp, [ --enable-precomp enable use of precompiled headers (Mac OS X)], wxUSE_PRECOMP)
+dnl allow the precompiled header option to be disabled under Mac OS X/Darwin
+WX_ARG_ENABLE(precomp, [ --enable-precomp enable use of precompiled headers (Mac OS X/Darwin)], wxUSE_PRECOMP)
if test "$wxUSE_DEBUG" = "yes"; then
DEFAULT_wxUSE_DEBUG_FLAG=yes
WX_ARG_ENABLE(no_deps, [ --enable-no_deps create code without dependency information], wxUSE_NO_DEPS)
WX_ARG_ENABLE(compat20, [ --enable-compat20 enable wxWindows 2.0 compatibility], WXWIN_COMPATIBILITY_2)
-WX_ARG_ENABLE(compat22, [ --disable-compat22 disable wxWindows 2.2 compatibility], WXWIN_COMPATIBILITY_2_2)
+WX_ARG_ENABLE(compat22, [ --disable-compat22 disable wxWindows 2.2 compatibility], WXWIN_COMPATIBILITY_2_2, disable)
AC_ARG_ENABLE(rpath, [ --enable-rpath=DIR output the rpath flag from wx-config], [wxRPATH_DIR="$enableval"])
arm-*-linux* )
AC_CHECK_SIZEOF(long long, 8)
;;
+ *-hp-hpux* )
+ AC_CHECK_SIZEOF(long long, 0)
+ if test "$ac_cv_sizeof_long_long" != "0"; then
+ dnl HPUX 10.20 headers need this define in order to use long long definitions
+ CPPFLAGS="$CPPFLAGS -D_INCLUDE_LONGLONG"
+ fi
+ ;;
* )
AC_CHECK_SIZEOF(long long, 0)
esac
dnl check for large file support
AC_SYS_LARGEFILE
+dnl we need to define _FILE_OFFSET_BITS or _LARGE_FILES on the compiler command
+dnl line because otherwise the system headers risk being included before
+dnl wx/defs.h which defines these constants leading to inconsistent
+dnl sizeof(off_t) in different source files of the same program and linking
+dnl problems
+if test "x$wx_largefile" = "xyes"; then
+ if test "x$ac_cv_sys_file_offset_bits" = "x64"; then
+ WX_LARGEFILE_FLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGE_FILES"
+ else
+ WX_LARGEFILE_FLAGS="-D_LARGE_FILES"
+ fi
+ CPPFLAGS="$CPPFLAGS $WX_LARGEFILE_FLAGS"
+fi
+
dnl check for bytesex stuff (don't use AC_C_BIGENDIAN to allow cross-compiling)
WX_C_BIGENDIAN
dnl notice that /usr/include should not be in this list, otherwise it breaks
dnl compilation on Solaris/gcc because standard headers are included instead
-dnl of the gcc ones (correction: it *is* needed for broken AIX compiler - but
-dnl do put it last!)
+dnl of the gcc ones. (recorrection.. sadly much depends on this since it was
+dnl first created and then 'corrected'.. removing /usr/include means system
+dnl GL and Xpm libs will dnl not be found on linux and probably other platforms
+dnl now. We need to correct that first before removing /usr/include again.
+dnl see the various (ab)uses of WX_PATH_FIND_LIBRARIES below )
dnl
dnl Also try to put all directories which may contain X11R6 before those which
dnl may contain X11R5/4 - we want to use R6 on machines which have both!
/usr/lpp/Xamples/include \
\
/usr/openwin/share/include \
- \
/usr/include"
SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` "
RESPROGRAMOBJ="\$(PROGRAM)_resources.o"
fi
+if test "$USE_DARWIN" = 1; then
+ dnl Mac OS X/Darwin GCC uses precompiled headers by default
+ dnl this can cause problems both when compiling wxMac and wxBase
+ if test "$wxUSE_PRECOMP" = "yes"; then
+ CPPFLAGS="$CPPFLAGS -cpp-precomp"
+ else
+ CPPFLAGS="$CPPFLAGS -no-cpp-precomp"
+ fi
+fi
+
if test "$wxUSE_GUI" = "yes"; then
USE_GUI=1
for libp in "" " -lXp"; do
if test "$libs_found" = "0"; then
for libsm_ice in " -lSM -lICE"; do
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = "0"; then
save_LIBS="$LIBS"
LIBS="$GUI_TK_LIBRARY -lXm${xpm_link} ${libp} -lXmu -lXext -lXt${libsm_ice} -lX11"
save_CFLAGS=$CFLAGS
fi
if test "$wxUSE_MAC" = 1; then
- if test "$wxUSE_PRECOMP" = "yes"; then
- CPPFLAGS="$CPPFLAGS -cpp-precomp"
- else
- CPPFLAGS="$CPPFLAGS -no-cpp-precomp"
- fi
- CPPFLAGS="$CPPFLAGS -I/Developer/Headers/FlatCarbon -I\${top_srcdir}/src/mac/morefile"
- CFLAGS="$CFLAGS -fpascal-strings"
- CXXFLAGS="$CXXFLAGS -fpascal-strings"
+ CPPFLAGS="$CPPFLAGS -fpascal-strings -I\${top_srcdir}/src/mac/morefile -I/Developer/Headers/FlatCarbon"
TOOLKIT_VPATH="\${top_srcdir}/src/mac${PATH_IFS}\${top_srcdir}/src/mac/morefile"
TOOLKIT=MAC
case "${host}" in
*-hp-hpux* )
dnl default settings are good for gcc but not for the native HP-UX
- if test "$GCC" == "yes"; then
- SHARED_LD="${SHARED_LD} ${PIC_FLAG}"
+ if test "$GCC" = "yes"; then
+ dnl -o flag must be after PIC flag
+ SHARED_LD="${CXX} -shared ${PIC_FLAG} -o"
else
dnl no idea why it wants it, but it does
LDFLAGS="$LDFLAGS -L/usr/lib"
*-*-darwin* )
dnl For Unix to MacOS X porting instructions, see:
dnl http://fink.sourceforge.net/doc/porting/porting.html
- CFLAGS="$CFLAGS -fno-common -DWXMAKINGDLL"
- CXXFLAGS="$CXXFLAGS -fno-common -DWXMAKINGDLL"
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -DWXMAKINGDLL"
+ CFLAGS="$CFLAGS -fno-common"
+ CXXFLAGS="$CXXFLAGS -fno-common"
dnl wxWindows must be fully binded (lazy binding breaks RTTI classinfo)
dnl this can be done either with the exe linker flag -Wl,-bind_at_load
dnl or with a double stage link in order to create a single module
WX_TARGET_LIBRARY_TYPE="a"
INSTALL_LIBRARY='$(INSTALL_DATA)'
+
+ dnl wx-config should assume the --static flag by default if we don't have
+ dnl any shared libs anyhow
+ STATIC_FLAG="yes"
+else
+ STATIC_FLAG="no"
fi
if test "$wxUSE_MAC" = 1; then
if test "$wxUSE_UNICODE" = yes; then
dnl also look if we have wide char IO functions
AC_CHECK_FUNCS(fputwc wprintf vswprintf)
+ dnl MinGW has a vswprintf with a different prototype, and
+ dnl a _vsnwprintf with the correct prototype, but AC_CHECK_FUNCS
+ dnl finds it even if it is not declared in some versions...
+ AC_MSG_CHECKING([for _vsnwprintf])
+ AC_TRY_COMPILE([#include <wchar.h>],
+ [&_vsnwprintf;],
+ [AC_MSG_RESULT([yes])
+ AC_DEFINE(HAVE__VSNWPRINTF)],
+ [AC_MSG_RESULT([no])]);
fi
AC_LANG_RESTORE
fi
fi
-dnl check for vfork() (even if it's the same as fork() in modern Unices)
-AC_CHECK_FUNCS(vfork)
-
dnl check for the function for temp files creation
AC_CHECK_FUNCS(mkstemp mktemp, break)
fi
if test "$USE_DARWIN" = 1; then
- dnl Mac OS X has both nanosleep and usleep
+ dnl Mac OS X/Darwin has both nanosleep and usleep
dnl but only usleep is defined in unistd.h
AC_DEFINE(HAVE_USLEEP)
HAVE_SOME_SLEEP_FUNC=1
dnl under MSW (except mingw32) we always have thread support
CPP_MT_FLAG=
-COMMON_THREADCPPFLAGS=
if test "$TOOLKIT" != "MSW"; then
dnl the code below:
*-aix* | *-freebsd*)
flag="-D_THREAD_SAFE"
;;
+ *-hp-hpux* )
+ flag="-D_REENTRANT"
+ ;;
*solaris* | alpha*-osf*)
flag="-D_REENTRANT"
;;
if test "$wxUSE_THREADS" = "yes" ; then
case "${host}" in
*-*-mingw32* )
- CFLAGS="$CFLAGS -mthreads"
- CXXFLAGS="$CXXFLAGS -mthreads"
- COMMON_THREADCPPFLAGS="-mthreads"
- LDFLAGS="$LDFLAGS -mthreads"
+ dnl check if the compiler accepts -mthreads
+ AC_CACHE_CHECK([if compiler supports -mthreads],
+ wx_cv_cflags_mthread,
+ [
+ CFLAGS_OLD="$CFLAGS"
+ CFLAGS="$CFLAGS -mthreads"
+ AC_TRY_COMPILE([], [],
+ wx_cv_cflags_mthread=yes,
+ wx_cv_cflags_mthread=no
+ )
+ ]
+ )
+
+ if test "$wx_cv_cflags_mthread" = "yes"; then
+ dnl it does, use it
+ CXXFLAGS="$CXXFLAGS -mthreads"
+ TOOLCHAIN_DEFS="$TOOLCHAIN_DEFS -mthreads"
+ LDFLAGS="$LDFLAGS -mthreads"
+ else
+ dnl it doesn't
+ CFLAGS="$CFLAGS_OLD"
+ fi
;;
esac
fi
if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then
-dnl There is now experimental generic MDI support
+dnl There is now experimental generic MDI support
dnl if test "$wxUSE_UNIVERSAL" = "yes"; then
dnl AC_MSG_WARN(MDI not yet supported for wxUniversal... disabled)
dnl wxUSE_MDI_ARCHITECTURE=no
fi
fi
-EXTRA_CFLAGS="$WXDEBUG $WXODBCFLAG $PROFILE $OPTIMISE $INCLUDES"
+EXTRA_CFLAGS="$WXDEBUG $WXODBCFLAG $PROFILE $OPTIMISE"
dnl remove the extra white space from the cc/c++/ld options
+CPPFLAGS=`echo $INCLUDES $CPPFLAGS | sed 's/ \\+/ /g'`
CFLAGS=`echo $EXTRA_CFLAGS $CFLAGS $CXXWARNINGS | sed 's/ \\+/ /g'`
CXXFLAGS=`echo $EXTRA_CFLAGS $CXXFLAGS $CXXWARNINGS | sed 's/ \+/ /g'`
LIBS=`echo $LIBS | sed 's/ \+/ /g'`
AC_SUBST(WX_TARGET_LIBRARY_SONAME)
AC_SUBST(WX_TARGET_LIBRARY_TYPE)
+AC_SUBST(STATIC_FLAG)
+
dnl debugging options
AC_SUBST(WXDEBUG_DEFINE)
AC_SUBST(WXCONFIG_LIBS_STATIC_GL)
AC_SUBST(WXCONFIG_INCLUDE)
AC_SUBST(WXCONFIG_RPATH)
+AC_SUBST(WX_LARGEFILE_FLAGS)
dnl the list of files to compile/install
AC_SUBST(ALL_OBJECTS)
AC_SUBST(PORT_FILES)
AC_SUBST(DISTDIR)
-AC_SUBST(COMMON_THREADCPPFLAGS)
dnl additional subdirectories where we will build
AC_SUBST(SAMPLES_SUBDIRS)