+
+
+# Configure paths for GTK+
+# Owen Taylor 97-11-3
# Guess values for system-dependent variables and create Makefiles.
# Any additions from configure.in:
ac_help="$ac_help
--enable-gui use GUI classes"
+ac_help="$ac_help
+--enable-universal use wxWindows GUI controls instead of native ones"
ac_help="$ac_help
--with-gtk use GTK+"
ac_help="$ac_help
--with-motif use Motif/Lesstif"
+ac_help="$ac_help
+ --with-mac use Mac OS X"
ac_help="$ac_help
--with-wine use WINE"
ac_help="$ac_help
--with-mingw use GCC Minimal MS-Windows"
ac_help="$ac_help
--with-pm use OS/2 Presentation Manager"
+ac_help="$ac_help
+ --with-mgl use MGL"
ac_help="$ac_help
--with-gtk-prefix=PFX Prefix where GTK is installed"
ac_help="$ac_help
ac_help="$ac_help
--with-libtiff use libtiff (TIFF file format)"
ac_help="$ac_help
+--with-freetype use freetype (font rasterizer)"
+ac_help="$ac_help
--with-opengl use OpenGL (or Mesa)"
ac_help="$ac_help
--with-dmalloc use dmalloc library (www.letters.com/dmalloc)"
ac_help="$ac_help
--enable-ipc use interprocess communication (wxSocket etc.)"
ac_help="$ac_help
+--enable-cmdline use wxCmdLineParser class"
+ac_help="$ac_help
+--enable-datetime use wxDateTime class"
+ac_help="$ac_help
+--enable-timedate use obsolete wxDate/wxTime classes"
+ac_help="$ac_help
+--enable-stopwatch use wxStopWatch class"
+ac_help="$ac_help
--enable-dialupman use dialup network classes"
ac_help="$ac_help
--enable-apple_ieee use the Apple IEEE codec"
ac_help="$ac_help
---enable-timedate use date/time classes"
+--enable-timer use wxTimer class"
ac_help="$ac_help
--enable-wave use wxWave class"
ac_help="$ac_help
ac_help="$ac_help
--enable-longlong use wxLongLong class"
ac_help="$ac_help
+--enable-geometry use geometry class"
+ac_help="$ac_help
--enable-log use logging system"
ac_help="$ac_help
--enable-streams use wxStream etc classes"
ac_help="$ac_help
--enable-file use wxFile classes"
ac_help="$ac_help
+--enable-ffile use wxFFile classes"
+ac_help="$ac_help
--enable-textfile use wxTextFile classes"
ac_help="$ac_help
+--enable-fontmap use font encodings conversion classes"
+ac_help="$ac_help
--enable-unicode compile wxString with Unicode support"
ac_help="$ac_help
--enable-wcsrtombs use wcsrtombs instead of buggy (GNU libc1/Linux libc5) wcstombs"
ac_help="$ac_help
--enable-wxprintfv use wxWindows implementation of vprintf()"
ac_help="$ac_help
---enable-joystick compile in joystick support (Linux only)"
-ac_help="$ac_help
--enable-std_iostreams use standard C++ stream classes"
ac_help="$ac_help
--enable-filesystem use virtual file systems classes"
ac_help="$ac_help
--enable-catch_segvs catch signals and pass them to wxApp::OnFatalException"
ac_help="$ac_help
+--enable-snglinst use wxSingleInstanceChecker class"
+ac_help="$ac_help
+--enable-mimetypes use wxMimeTypesManager"
+ac_help="$ac_help
--enable-threads use threads"
ac_help="$ac_help
--enable-serial use class serialization"
ac_help="$ac_help
--enable-mdi use multiple document interface architecture"
ac_help="$ac_help
+--enable-loggui use standard GUI logger"
+ac_help="$ac_help
+--enable-logwin use wxLogWindow"
+ac_help="$ac_help
--enable-postscript use wxPostscriptDC device context (default for gtk+)"
ac_help="$ac_help
--enable-prologio use Prolog IO library"
ac_help="$ac_help
--enable-dnd use Drag'n'Drop classes"
ac_help="$ac_help
+--enable-metafile use win32 metafiles"
+ac_help="$ac_help
--enable-wxtree make wxTree library"
ac_help="$ac_help
--enable-controls use all usual controls"
ac_help="$ac_help
--enable-accel use accelerators"
ac_help="$ac_help
---enable-caret use wxCaret class"
+--enable-button use wxButton class"
ac_help="$ac_help
--enable-bmpbutton use wxBitmapButton class"
ac_help="$ac_help
+--enable-calendar use wxCalendarCtrl class"
+ac_help="$ac_help
+--enable-caret use wxCaret class"
+ac_help="$ac_help
--enable-checkbox use wxCheckBox class"
ac_help="$ac_help
--enable-checklst use wxCheckListBox (listbox with checkboxes) class"
ac_help="$ac_help
--enable-statline use wxStaticLine class"
ac_help="$ac_help
+--enable-stattext use wxStaticText class"
+ac_help="$ac_help
--enable-statusbar use wxStatusBar class"
ac_help="$ac_help
--enable-tabdialog use wxTabControl class"
ac_help="$ac_help
+--enable-textctrl use wxTextCtrl class"
+ac_help="$ac_help
+--enable-togglebtn use wxToggleButton class"
+ac_help="$ac_help
--enable-toolbar use wxToolBar class"
ac_help="$ac_help
--enable-tbarnative use native wxToolBar class"
ac_help="$ac_help
--enable-commondlg use common dialogs (wxDirDialog, wxProgressDialog, wxTextDialog, ...)"
ac_help="$ac_help
+--enable-choicedlg use wxChoiceDialog"
+ac_help="$ac_help
+--enable-coldlg use wxColourDialog"
+ac_help="$ac_help
+--enable-filedlg use wxFileDialog"
+ac_help="$ac_help
+--enable-fontdlg use wxFontDialog"
+ac_help="$ac_help
--enable-dirdlg use wxDirDialog"
ac_help="$ac_help
+--enable-msgdlg use wxMessageDialog"
+ac_help="$ac_help
+--enable-numberdlg use wxNumberEntryDialog"
+ac_help="$ac_help
--enable-textdlg use wxTextDialog"
ac_help="$ac_help
--enable-tipdlg use startup tips"
ac_help="$ac_help
--enable-progressdlg use wxProgressDialog"
ac_help="$ac_help
+--enable-menus use wxMenu/wxMenuBar/wxMenuItem classes"
+ac_help="$ac_help
--enable-miniframe use wxMiniFrame class"
ac_help="$ac_help
--enable-html use wxHTML sub-library"
ac_help="$ac_help
--enable-busyinfo use wxBusyInfo"
ac_help="$ac_help
---enable-plot use wxPlot"
+--enable-joystick compile in joystick support (Linux only)"
+ac_help="$ac_help
+--enable-metafiles use wxMetaFile (Windows only)"
+ac_help="$ac_help
+--enable-image use wxImage class"
ac_help="$ac_help
--enable-gif use gif images (GIF file format)"
ac_help="$ac_help
--enable-pcx use pcx images (PCX file format)"
ac_help="$ac_help
--enable-pnm use pnm images (PNM file format)"
+ac_help="$ac_help
+--enable-xpm use xpm images (XPM file format)"
+ac_help="$ac_help
+ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)"
+ac_help="$ac_help
+ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
+ac_help="$ac_help
+ --disable-gtktest Do not try to compile and run a test GTK program"
ac_help="$ac_help
--with-x use the X Window System"
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:846: checking host system type" >&5
+echo "configure:916: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:867: checking target system type" >&5
+echo "configure:937: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:885: checking build system type" >&5
+echo "configure:955: checking build system type" >&5
build_alias=$build
case "$build_alias" in
WX_MAJOR_VERSION_NUMBER=2
-WX_MINOR_VERSION_NUMBER=1
-WX_RELEASE_NUMBER=14
-
-WX_INTERFACE_AGE=0
-WX_BINARY_AGE=0
+WX_MINOR_VERSION_NUMBER=3
+WX_RELEASE_NUMBER=1
WX_VERSION=$WX_MAJOR_VERSION_NUMBER.$WX_MINOR_VERSION_NUMBER.$WX_RELEASE_NUMBER
-
WX_RELEASE=$WX_MAJOR_VERSION_NUMBER.$WX_MINOR_VERSION_NUMBER
-WX_CURRENT=`expr $WX_RELEASE_NUMBER - $WX_INTERFACE_AGE`
-WX_REVISION=$WX_INTERFACE_AGE
-WX_AGE=`expr $WX_BINARY_AGE - $WX_INTERFACE_AGE`
+
+WX_CURRENT=0
+WX_REVISION=0
+WX_AGE=0
+
USE_UNIX=1
USE_WIN32=0
USE_BEOS=0
+USE_MAC=0
USE_LINUX=
USE_SGI=
USE_OSF=
USE_BSD=
USE_FREEBSD=
+USE_OPENBSD=
+USE_NETBSD=
USE_VMS=
USE_ULTRIX=
USE_CYGWIN=
NEEDS_D_REENTRANT_FOR_R_FUNCS=0
-ALL_TOOLKITS="CYGWIN GTK MINGW MOTIF WINE PM"
+ALL_TOOLKITS="CYGWIN GTK MAC MGL MINGW MOTIF PM WINE"
DEFAULT_wxUSE_GTK=0
+DEFAULT_wxUSE_MAC=0
+DEFAULT_wxUSE_MGL=0
DEFAULT_wxUSE_MOTIF=0
DEFAULT_wxUSE_MSW=0
-DEFAULT_wxUSE_WINE=0
DEFAULT_wxUSE_PM=0
+DEFAULT_wxUSE_WINE=0
DEFAULT_DEFAULT_wxUSE_GTK=0
+DEFAULT_DEFAULT_wxUSE_MAC=0
+DEFAULT_DEFAULT_wxUSE_MGL=0
DEFAULT_DEFAULT_wxUSE_MOTIF=0
DEFAULT_DEFAULT_wxUSE_MSW=0
-DEFAULT_DEFAULT_wxUSE_WINE=0
DEFAULT_DEFAULT_wxUSE_PM=0
+DEFAULT_DEFAULT_wxUSE_WINE=0
PROGRAM_EXT=
DEFAULT_DEFAULT_wxUSE_MOTIF=1
;;
- *-*-freebsd* | *-*-netbsd*)
+ *-*-freebsd*)
USE_BSD=1
USE_FREEBSD=1
cat >> confdefs.h <<\EOF
cat >> confdefs.h <<\EOF
#define __BSD__ 1
+EOF
+
+ DEFAULT_DEFAULT_wxUSE_GTK=1
+ ;;
+ *-*-openbsd*)
+ USE_BSD=1
+ USE_OPENBSD=1
+ cat >> confdefs.h <<\EOF
+#define __FREEBSD__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define __OPENBSD__ 1
+EOF
+
+ DEFAULT_DEFAULT_wxUSE_GTK=1
+ ;;
+ *-*-netbsd*)
+ USE_BSD=1
+ USE_NETBSD=1
+ cat >> confdefs.h <<\EOF
+#define __FREEBSD__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define __NETBSD__ 1
EOF
DEFAULT_DEFAULT_wxUSE_GTK=1
EOF
DEFAULT_DEFAULT_wxUSE_MOTIF=1
+ NEEDS_D_REENTRANT_FOR_R_FUNCS=1
;;
*-*-dgux5* )
USE_ALPHA=1
DEFAULT_DEFAULT_wxUSE_MOTIF=1
;;
- *-*-cygwin32* | *-*-mingw32* )
+ *-*-cygwin* | *-*-mingw32* )
USE_UNIX=0
USE_WIN32=1
cat >> confdefs.h <<\EOF
DEFAULT_DEFAULT_wxUSE_PM=1
;;
+ *-*-darwin* )
+ USE_BSD=1
+ USE_MAC=1
+ cat >> confdefs.h <<\EOF
+#define __MAC__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define __BSD__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define __UNIX__ 1
+EOF
+
+ DEFAULT_DEFAULT_wxUSE_MAC=1
+ ;;
+
*-*-beos* )
USE_BEOS=1
cat >> confdefs.h <<\EOF
if test "$USE_LINUX" = 1; then
echo $ac_n "checking for gettext in -lc""... $ac_c" 1>&6
-echo "configure:1182: checking for gettext in -lc" >&5
+echo "configure:1302: checking for gettext in -lc" >&5
ac_lib_var=`echo c'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1190 "configure"
+#line 1310 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:1201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
DEBUG_CONFIGURE=0
if test $DEBUG_CONFIGURE = 1; then
+ DEFAULT_wxUSE_UNIVERSAL=no
+
DEFAULT_wxUSE_THREADS=yes
DEFAULT_wxUSE_SHARED=yes
DEFAULT_wxUSE_BURNT_NAME=no
- DEFAULT_wxUSE_OPTIMISE=yes
+ DEFAULT_wxUSE_OPTIMISE=no
DEFAULT_wxUSE_PROFILE=no
DEFAULT_wxUSE_NO_DEPS=no
DEFAULT_wxUSE_NO_RTTI=no
DEFAULT_wxUSE_APPLE_IEEE=no
DEFAULT_wxUSE_LOG=yes
+ DEFAULT_wxUSE_LOGWINDOW=no
+ DEFAULT_wxUSE_LOGGUI=no
DEFAULT_wxUSE_GUI=yes
+ DEFAULT_wxUSE_CONTROLS=no
DEFAULT_wxUSE_ZLIB=no
DEFAULT_wxUSE_LIBPNG=no
DEFAULT_wxUSE_LIBJPEG=no
DEFAULT_wxUSE_LIBTIFF=no
DEFAULT_wxUSE_ODBC=no
+ DEFAULT_wxUSE_FREETYPE=no
DEFAULT_wxUSE_OPENGL=no
DEFAULT_wxUSE_ON_FATAL_EXCEPTION=no
+ DEFAULT_wxUSE_SNGLINST_CHECKER=no
DEFAULT_wxUSE_STD_IOSTREAM=no
+ DEFAULT_wxUSE_CMDLINE_PARSER=no
+ DEFAULT_wxUSE_DATETIME=no
+ DEFAULT_wxUSE_TIMEDATE=no
+ DEFAULT_wxUSE_TIMER=no
+ DEFAULT_wxUSE_STOPWATCH=no
DEFAULT_wxUSE_FILE=no
+ DEFAULT_wxUSE_FFILE=no
DEFAULT_wxUSE_TEXTFILE=no
- DEFAULT_wxUSE_TIMEDATE=no
DEFAULT_wxUSE_WAVE=no
DEFAULT_wxUSE_INTL=no
DEFAULT_wxUSE_CONFIG=no
+ DEFAULT_wxUSE_FONTMAP=no
DEFAULT_wxUSE_STREAMS=no
DEFAULT_wxUSE_SOCKETS=no
DEFAULT_wxUSE_DIALUP_MANAGER=no
DEFAULT_wxUSE_JOYSTICK=no
DEFAULT_wxUSE_DYNLIB_CLASS=no
DEFAULT_wxUSE_LONGLONG=no
+ DEFAULT_wxUSE_GEOMETRY=no
DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=no
DEFAULT_wxUSE_NORMALIZED_PS_FONTS=no
DEFAULT_wxUSE_HELP=no
DEFAULT_wxUSE_WXTREE=no
DEFAULT_wxUSE_METAFILE=no
+ DEFAULT_wxUSE_MIMETYPE=no
DEFAULT_wxUSE_COMMONDLGS=no
+ DEFAULT_wxUSE_CHOICEDLG=no
+ DEFAULT_wxUSE_COLOURDLG=no
DEFAULT_wxUSE_DIRDLG=no
+ DEFAULT_wxUSE_FILEDLG=no
+ DEFAULT_wxUSE_FONTDLG=no
+ DEFAULT_wxUSE_MSGDLG=no
+ DEFAULT_wxUSE_NUMBERDLG=no
DEFAULT_wxUSE_TEXTDLG=no
DEFAULT_wxUSE_STARTUP_TIPS=no
DEFAULT_wxUSE_PROGRESSDLG=no
+ DEFAULT_wxUSE_MENUS=no
DEFAULT_wxUSE_MINIFRAME=no
DEFAULT_wxUSE_HTML=no
DEFAULT_wxUSE_FILESYSTEM=no
DEFAULT_wxUSE_FS_ZIP=no
DEFAULT_wxUSE_BUSYINFO=no
DEFAULT_wxUSE_ZIPSTREAM=no
- DEFAULT_wxUSE_VALIDATORS=yes
+ DEFAULT_wxUSE_VALIDATORS=no
DEFAULT_wxUSE_ACCEL=no
- DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_BUTTON=no
DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=no
DEFAULT_wxUSE_CHECKBOX=no
DEFAULT_wxUSE_CHECKLST=no
- DEFAULT_wxUSE_CHOICE=yes
+ DEFAULT_wxUSE_CHOICE=no
DEFAULT_wxUSE_COMBOBOX=no
DEFAULT_wxUSE_GAUGE=no
DEFAULT_wxUSE_GRID=no
DEFAULT_wxUSE_LISTBOX=no
DEFAULT_wxUSE_LISTCTRL=no
DEFAULT_wxUSE_NOTEBOOK=no
- DEFAULT_wxUSE_PLOT=no
DEFAULT_wxUSE_RADIOBOX=no
DEFAULT_wxUSE_RADIOBTN=no
DEFAULT_wxUSE_SASH=no
DEFAULT_wxUSE_STATBMP=no
DEFAULT_wxUSE_STATBOX=no
DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATTEXT=no
DEFAULT_wxUSE_STATUSBAR=yes
DEFAULT_wxUSE_TABDIALOG=no
+ DEFAULT_wxUSE_TEXTCTRL=no
+ DEFAULT_wxUSE_TOGGLEBTN=no
DEFAULT_wxUSE_TOOLBAR=no
DEFAULT_wxUSE_TOOLBAR_NATIVE=no
DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
DEFAULT_wxUSE_UNICODE=no
DEFAULT_wxUSE_WCSRTOMBS=no
+ DEFAULT_wxUSE_IMAGE=no
DEFAULT_wxUSE_GIF=no
DEFAULT_wxUSE_PCX=no
DEFAULT_wxUSE_PNM=no
+ DEFAULT_wxUSE_XPM=no
else
+ DEFAULT_wxUSE_UNIVERSAL=no
+
DEFAULT_wxUSE_THREADS=yes
DEFAULT_wxUSE_SHARED=yes
DEFAULT_wxUSE_LIBJPEG=yes
DEFAULT_wxUSE_LIBTIFF=yes
DEFAULT_wxUSE_ODBC=no
+ DEFAULT_wxUSE_FREETYPE=no
DEFAULT_wxUSE_OPENGL=no
DEFAULT_wxUSE_ON_FATAL_EXCEPTION=yes
+ DEFAULT_wxUSE_SNGLINST_CHECKER=yes
DEFAULT_wxUSE_STD_IOSTREAM=no
+ DEFAULT_wxUSE_CMDLINE_PARSER=yes
+ DEFAULT_wxUSE_DATETIME=yes
+ DEFAULT_wxUSE_TIMEDATE=no
+ DEFAULT_wxUSE_TIMER=yes
+ DEFAULT_wxUSE_STOPWATCH=yes
DEFAULT_wxUSE_FILE=yes
+ DEFAULT_wxUSE_FFILE=yes
DEFAULT_wxUSE_TEXTFILE=yes
- DEFAULT_wxUSE_TIMEDATE=yes
DEFAULT_wxUSE_WAVE=no
DEFAULT_wxUSE_INTL=yes
DEFAULT_wxUSE_CONFIG=yes
+ DEFAULT_wxUSE_FONTMAP=yes
DEFAULT_wxUSE_STREAMS=yes
DEFAULT_wxUSE_SOCKETS=yes
DEFAULT_wxUSE_DIALUP_MANAGER=yes
DEFAULT_wxUSE_JOYSTICK=yes
DEFAULT_wxUSE_DYNLIB_CLASS=yes
DEFAULT_wxUSE_LONGLONG=yes
+ DEFAULT_wxUSE_GEOMETRY=yes
DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=yes
DEFAULT_wxUSE_NORMALIZED_PS_FONTS=yes
DEFAULT_wxUSE_HELP=yes
DEFAULT_wxUSE_WXTREE=yes
DEFAULT_wxUSE_METAFILE=yes
+ DEFAULT_wxUSE_MIMETYPE=yes
DEFAULT_wxUSE_COMMONDLGS=yes
+ DEFAULT_wxUSE_CHOICEDLG=yes
+ DEFAULT_wxUSE_COLOURDLG=yes
DEFAULT_wxUSE_DIRDLG=yes
+ DEFAULT_wxUSE_FILEDLG=yes
+ DEFAULT_wxUSE_FONTDLG=yes
+ DEFAULT_wxUSE_MSGDLG=yes
+ DEFAULT_wxUSE_NUMBERDLG=yes
DEFAULT_wxUSE_TEXTDLG=yes
DEFAULT_wxUSE_STARTUP_TIPS=yes
DEFAULT_wxUSE_PROGRESSDLG=yes
+ DEFAULT_wxUSE_MENUS=yes
DEFAULT_wxUSE_MINIFRAME=yes
DEFAULT_wxUSE_HTML=yes
DEFAULT_wxUSE_FILESYSTEM=yes
DEFAULT_wxUSE_VALIDATORS=yes
DEFAULT_wxUSE_ACCEL=yes
- DEFAULT_wxUSE_CARET=yes
+ DEFAULT_wxUSE_BUTTON=yes
DEFAULT_wxUSE_BMPBUTTON=yes
+ DEFAULT_wxUSE_CALCTRL=yes
+ DEFAULT_wxUSE_CARET=yes
DEFAULT_wxUSE_CHECKBOX=yes
DEFAULT_wxUSE_CHECKLST=yes
DEFAULT_wxUSE_CHOICE=yes
DEFAULT_wxUSE_LISTBOX=yes
DEFAULT_wxUSE_LISTCTRL=yes
DEFAULT_wxUSE_NOTEBOOK=yes
- DEFAULT_wxUSE_PLOT=yes
DEFAULT_wxUSE_RADIOBOX=yes
DEFAULT_wxUSE_RADIOBTN=yes
DEFAULT_wxUSE_SASH=yes
DEFAULT_wxUSE_STATBMP=yes
DEFAULT_wxUSE_STATBOX=yes
DEFAULT_wxUSE_STATLINE=yes
+ DEFAULT_wxUSE_STATTEXT=yes
DEFAULT_wxUSE_STATUSBAR=yes
DEFAULT_wxUSE_TABDIALOG=no
+ DEFAULT_wxUSE_TEXTCTRL=yes
+ DEFAULT_wxUSE_TOGGLEBTN=yes
DEFAULT_wxUSE_TOOLBAR=yes
DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
DEFAULT_wxUSE_UNICODE=no
DEFAULT_wxUSE_WCSRTOMBS=no
+ DEFAULT_wxUSE_IMAGE=yes
DEFAULT_wxUSE_GIF=yes
DEFAULT_wxUSE_PCX=yes
DEFAULT_wxUSE_PNM=yes
+ DEFAULT_wxUSE_XPM=yes
fi
- echo $ac_n "checking "for --enable-gui"""... $ac_c" 1>&6
-echo "configure:1495: checking "for --enable-gui"" >&5
+ echo $ac_n "checking for --enable-gui""... $ac_c" 1>&6
+echo "configure:1668: checking for --enable-gui" >&5
no_cache=0
# Check whether --enable-gui or --disable-gui was given.
if test "${enable_gui+set}" = set; then
if test "$wxUSE_GUI" = "yes"; then
+
+ echo $ac_n "checking for --enable-universal""... $ac_c" 1>&6
+echo "configure:1710: checking for --enable-universal" >&5
+ no_cache=0
+ # Check whether --enable-universal or --disable-universal was given.
+if test "${enable_universal+set}" = set; then
+ enableval="$enable_universal"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_universal='wxUSE_UNIVERSAL=yes'
+ else
+ ac_cv_use_universal='wxUSE_UNIVERSAL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_UNIVERSAL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_universal='wxUSE_UNIVERSAL='$DEFAULT_wxUSE_UNIVERSAL
+
+fi
+
+
+ eval "$ac_cv_use_universal"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_universal >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_UNIVERSAL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
# Check whether --with-gtk or --without-gtk was given.
if test "${with_gtk+set}" = set; then
withval="$with_gtk"
wxUSE_MOTIF="$withval" CACHE_MOTIF=1 TOOLKIT_GIVEN=1
fi
+# Check whether --with-mac or --without-mac was given.
+if test "${with_mac+set}" = set; then
+ withval="$with_mac"
+ wxUSE_MAC="$withval" TOOLKIT_GIVEN=1
+fi
+
# Check whether --with-wine or --without-wine was given.
if test "${with_wine+set}" = set; then
withval="$with_wine"
wxUSE_PM="$withval" CACHE_PM=1 TOOLKIT_GIVEN=1
fi
+# Check whether --with-mgl or --without-mgl was given.
+if test "${with_mgl+set}" = set; then
+ withval="$with_mgl"
+ wxUSE_MGL="$withval" CACHE_MGL=1 TOOLKIT_GIVEN=1
+fi
+
# Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
- echo $ac_n "checking "for --with-libpng"""... $ac_c" 1>&6
-echo "configure:1591: checking "for --with-libpng"" >&5
+ echo $ac_n "checking for --with-libpng""... $ac_c" 1>&6
+echo "configure:1815: checking for --with-libpng" >&5
no_cache=0
# Check whether --with-libpng or --without-libpng was given.
if test "${with_libpng+set}" = set; then
fi
- echo $ac_n "checking "for --with-libjpeg"""... $ac_c" 1>&6
-echo "configure:1638: checking "for --with-libjpeg"" >&5
+ echo $ac_n "checking for --with-libjpeg""... $ac_c" 1>&6
+echo "configure:1862: checking for --with-libjpeg" >&5
no_cache=0
# Check whether --with-libjpeg or --without-libjpeg was given.
if test "${with_libjpeg+set}" = set; then
fi
- echo $ac_n "checking "for --with-libtiff"""... $ac_c" 1>&6
-echo "configure:1685: checking "for --with-libtiff"" >&5
+ echo $ac_n "checking for --with-libtiff""... $ac_c" 1>&6
+echo "configure:1909: checking for --with-libtiff" >&5
no_cache=0
# Check whether --with-libtiff or --without-libtiff was given.
if test "${with_libtiff+set}" = set; then
fi
- echo $ac_n "checking "for --with-opengl"""... $ac_c" 1>&6
-echo "configure:1732: checking "for --with-opengl"" >&5
+ echo $ac_n "checking for --with-freetype""... $ac_c" 1>&6
+echo "configure:1956: checking for --with-freetype" >&5
+ no_cache=0
+ # Check whether --with-freetype or --without-freetype was given.
+if test "${with_freetype+set}" = set; then
+ withval="$with_freetype"
+
+ if test "$withval" = yes; then
+ ac_cv_use_freetype='wxUSE_FREETYPE=yes'
+ elif test "$withval" = no; then
+ ac_cv_use_freetype='wxUSE_FREETYPE=no'
+ elif test "$withval" = sys; then
+ ac_cv_use_freetype='wxUSE_FREETYPE=sys'
+ else
+ { echo "configure: error: Invalid value for --with-freetype: should be yes, no or sys" 1>&2; exit 1; }
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FREETYPE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_freetype='wxUSE_FREETYPE='$DEFAULT_wxUSE_FREETYPE
+
+fi
+
+
+ eval "$ac_cv_use_freetype"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_freetype >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FREETYPE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ elif test "$wxUSE_FREETYPE" = no; then
+ echo "$ac_t""no" 1>&6
+ elif test "$wxUSE_FREETYPE" = sys; then
+ echo "$ac_t""system version" 1>&6
+ else
+ { echo "configure: error: Invalid value for --with-freetype: should be yes, no or sys" 1>&2; exit 1; }
+ fi
+
+
+ echo $ac_n "checking for --with-opengl""... $ac_c" 1>&6
+echo "configure:2003: checking for --with-opengl" >&5
no_cache=0
# Check whether --with-opengl or --without-opengl was given.
if test "${with_opengl+set}" = set; then
fi
- echo $ac_n "checking "for --with-dmalloc"""... $ac_c" 1>&6
-echo "configure:1774: checking "for --with-dmalloc"" >&5
+ echo $ac_n "checking for --with-dmalloc""... $ac_c" 1>&6
+echo "configure:2045: checking for --with-dmalloc" >&5
no_cache=0
# Check whether --with-dmalloc or --without-dmalloc was given.
if test "${with_dmalloc+set}" = set; then
fi
- echo $ac_n "checking "for --with-zlib"""... $ac_c" 1>&6
-echo "configure:1813: checking "for --with-zlib"" >&5
+ echo $ac_n "checking for --with-zlib""... $ac_c" 1>&6
+echo "configure:2084: checking for --with-zlib" >&5
no_cache=0
# Check whether --with-zlib or --without-zlib was given.
if test "${with_zlib+set}" = set; then
fi
- echo $ac_n "checking "for --with-odbc"""... $ac_c" 1>&6
-echo "configure:1860: checking "for --with-odbc"" >&5
+ echo $ac_n "checking for --with-odbc""... $ac_c" 1>&6
+echo "configure:2131: checking for --with-odbc" >&5
no_cache=0
# Check whether --with-odbc or --without-odbc was given.
if test "${with_odbc+set}" = set; then
- echo $ac_n "checking "for --enable-shared"""... $ac_c" 1>&6
-echo "configure:1902: checking "for --enable-shared"" >&5
+ echo $ac_n "checking for --enable-shared""... $ac_c" 1>&6
+echo "configure:2173: checking for --enable-shared" >&5
no_cache=0
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
fi
- echo $ac_n "checking "for --enable-burnt_name"""... $ac_c" 1>&6
-echo "configure:1941: checking "for --enable-burnt_name"" >&5
+ echo $ac_n "checking for --enable-burnt_name""... $ac_c" 1>&6
+echo "configure:2212: checking for --enable-burnt_name" >&5
no_cache=0
# Check whether --enable-burnt_name or --disable-burnt_name was given.
if test "${enable_burnt_name+set}" = set; then
fi
- echo $ac_n "checking "for --enable-optimise"""... $ac_c" 1>&6
-echo "configure:1980: checking "for --enable-optimise"" >&5
+ echo $ac_n "checking for --enable-optimise""... $ac_c" 1>&6
+echo "configure:2251: checking for --enable-optimise" >&5
no_cache=0
# Check whether --enable-optimise or --disable-optimise was given.
if test "${enable_optimise+set}" = set; then
fi
- echo $ac_n "checking "for --enable-debug"""... $ac_c" 1>&6
-echo "configure:2019: checking "for --enable-debug"" >&5
+ echo $ac_n "checking for --enable-debug""... $ac_c" 1>&6
+echo "configure:2290: checking for --enable-debug" >&5
no_cache=0
# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
fi
- echo $ac_n "checking "for --enable-debug_flag"""... $ac_c" 1>&6
-echo "configure:2067: checking "for --enable-debug_flag"" >&5
+ echo $ac_n "checking for --enable-debug_flag""... $ac_c" 1>&6
+echo "configure:2338: checking for --enable-debug_flag" >&5
no_cache=0
# Check whether --enable-debug_flag or --disable-debug_flag was given.
if test "${enable_debug_flag+set}" = set; then
fi
- echo $ac_n "checking "for --enable-debug_info"""... $ac_c" 1>&6
-echo "configure:2106: checking "for --enable-debug_info"" >&5
+ echo $ac_n "checking for --enable-debug_info""... $ac_c" 1>&6
+echo "configure:2377: checking for --enable-debug_info" >&5
no_cache=0
# Check whether --enable-debug_info or --disable-debug_info was given.
if test "${enable_debug_info+set}" = set; then
fi
- echo $ac_n "checking "for --enable-debug_gdb"""... $ac_c" 1>&6
-echo "configure:2145: checking "for --enable-debug_gdb"" >&5
+ echo $ac_n "checking for --enable-debug_gdb""... $ac_c" 1>&6
+echo "configure:2416: checking for --enable-debug_gdb" >&5
no_cache=0
# Check whether --enable-debug_gdb or --disable-debug_gdb was given.
if test "${enable_debug_gdb+set}" = set; then
fi
- echo $ac_n "checking "for --enable-debug_cntxt"""... $ac_c" 1>&6
-echo "configure:2184: checking "for --enable-debug_cntxt"" >&5
+ echo $ac_n "checking for --enable-debug_cntxt""... $ac_c" 1>&6
+echo "configure:2455: checking for --enable-debug_cntxt" >&5
no_cache=0
# Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
if test "${enable_debug_cntxt+set}" = set; then
fi
- echo $ac_n "checking "for --enable-mem_tracing"""... $ac_c" 1>&6
-echo "configure:2223: checking "for --enable-mem_tracing"" >&5
+ echo $ac_n "checking for --enable-mem_tracing""... $ac_c" 1>&6
+echo "configure:2494: checking for --enable-mem_tracing" >&5
no_cache=0
# Check whether --enable-mem_tracing or --disable-mem_tracing was given.
if test "${enable_mem_tracing+set}" = set; then
fi
- echo $ac_n "checking "for --enable-profile"""... $ac_c" 1>&6
-echo "configure:2262: checking "for --enable-profile"" >&5
+ echo $ac_n "checking for --enable-profile""... $ac_c" 1>&6
+echo "configure:2533: checking for --enable-profile" >&5
no_cache=0
# Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
fi
- echo $ac_n "checking "for --enable-no_rtti"""... $ac_c" 1>&6
-echo "configure:2301: checking "for --enable-no_rtti"" >&5
+ echo $ac_n "checking for --enable-no_rtti""... $ac_c" 1>&6
+echo "configure:2572: checking for --enable-no_rtti" >&5
no_cache=0
# Check whether --enable-no_rtti or --disable-no_rtti was given.
if test "${enable_no_rtti+set}" = set; then
fi
- echo $ac_n "checking "for --enable-no_exceptions"""... $ac_c" 1>&6
-echo "configure:2340: checking "for --enable-no_exceptions"" >&5
+ echo $ac_n "checking for --enable-no_exceptions""... $ac_c" 1>&6
+echo "configure:2611: checking for --enable-no_exceptions" >&5
no_cache=0
# Check whether --enable-no_exceptions or --disable-no_exceptions was given.
if test "${enable_no_exceptions+set}" = set; then
fi
- echo $ac_n "checking "for --enable-permissive"""... $ac_c" 1>&6
-echo "configure:2379: checking "for --enable-permissive"" >&5
+ echo $ac_n "checking for --enable-permissive""... $ac_c" 1>&6
+echo "configure:2650: checking for --enable-permissive" >&5
no_cache=0
# Check whether --enable-permissive or --disable-permissive was given.
if test "${enable_permissive+set}" = set; then
fi
- echo $ac_n "checking "for --enable-no_deps"""... $ac_c" 1>&6
-echo "configure:2418: checking "for --enable-no_deps"" >&5
+ echo $ac_n "checking for --enable-no_deps""... $ac_c" 1>&6
+echo "configure:2689: checking for --enable-no_deps" >&5
no_cache=0
# Check whether --enable-no_deps or --disable-no_deps was given.
if test "${enable_no_deps+set}" = set; then
- echo $ac_n "checking "for --enable-intl"""... $ac_c" 1>&6
-echo "configure:2459: checking "for --enable-intl"" >&5
+ echo $ac_n "checking for --enable-intl""... $ac_c" 1>&6
+echo "configure:2730: checking for --enable-intl" >&5
no_cache=0
# Check whether --enable-intl or --disable-intl was given.
if test "${enable_intl+set}" = set; then
fi
- echo $ac_n "checking "for --enable-config"""... $ac_c" 1>&6
-echo "configure:2498: checking "for --enable-config"" >&5
+ echo $ac_n "checking for --enable-config""... $ac_c" 1>&6
+echo "configure:2769: checking for --enable-config" >&5
no_cache=0
# Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
- echo $ac_n "checking "for --enable-sockets"""... $ac_c" 1>&6
-echo "configure:2538: checking "for --enable-sockets"" >&5
+ echo $ac_n "checking for --enable-sockets""... $ac_c" 1>&6
+echo "configure:2809: checking for --enable-sockets" >&5
no_cache=0
# Check whether --enable-sockets or --disable-sockets was given.
if test "${enable_sockets+set}" = set; then
- echo $ac_n "checking "for --enable-ipc"""... $ac_c" 1>&6
-echo "configure:2578: checking "for --enable-ipc"" >&5
+ echo $ac_n "checking for --enable-ipc""... $ac_c" 1>&6
+echo "configure:2849: checking for --enable-ipc" >&5
no_cache=0
# Check whether --enable-ipc or --disable-ipc was given.
if test "${enable_ipc+set}" = set; then
- echo $ac_n "checking "for --enable-dialupman"""... $ac_c" 1>&6
-echo "configure:2618: checking "for --enable-dialupman"" >&5
+ echo $ac_n "checking for --enable-cmdline""... $ac_c" 1>&6
+echo "configure:2889: checking for --enable-cmdline" >&5
no_cache=0
- # Check whether --enable-dialupman or --disable-dialupman was given.
-if test "${enable_dialupman+set}" = set; then
- enableval="$enable_dialupman"
+ # Check whether --enable-cmdline or --disable-cmdline was given.
+if test "${enable_cmdline+set}" = set; then
+ enableval="$enable_cmdline"
if test "$enableval" = yes; then
- ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=yes'
+ ac_cv_use_cmdline='wxUSE_CMDLINE_PARSER=yes'
else
- ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=no'
+ ac_cv_use_cmdline='wxUSE_CMDLINE_PARSER=no'
fi
else
- LINE=`grep "wxUSE_DIALUP_MANAGER" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_CMDLINE_PARSER" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER='$DEFAULT_wxUSE_DIALUP_MANAGER
+ ac_cv_use_cmdline='wxUSE_CMDLINE_PARSER='$DEFAULT_wxUSE_CMDLINE_PARSER
fi
- eval "$ac_cv_use_dialupman"
+ eval "$ac_cv_use_cmdline"
if test "$no_cache" != 1; then
- echo $ac_cv_use_dialupman >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_cmdline >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_DIALUP_MANAGER" = yes; then
+ if test "$wxUSE_CMDLINE_PARSER" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-apple_ieee"""... $ac_c" 1>&6
-echo "configure:2657: checking "for --enable-apple_ieee"" >&5
+ echo $ac_n "checking for --enable-datetime""... $ac_c" 1>&6
+echo "configure:2928: checking for --enable-datetime" >&5
no_cache=0
- # Check whether --enable-apple_ieee or --disable-apple_ieee was given.
-if test "${enable_apple_ieee+set}" = set; then
- enableval="$enable_apple_ieee"
+ # Check whether --enable-datetime or --disable-datetime was given.
+if test "${enable_datetime+set}" = set; then
+ enableval="$enable_datetime"
if test "$enableval" = yes; then
- ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=yes'
+ ac_cv_use_datetime='wxUSE_DATETIME=yes'
else
- ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=no'
+ ac_cv_use_datetime='wxUSE_DATETIME=no'
fi
else
- LINE=`grep "wxUSE_APPLE_IEEE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_DATETIME" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE='$DEFAULT_wxUSE_APPLE_IEEE
+ ac_cv_use_datetime='wxUSE_DATETIME='$DEFAULT_wxUSE_DATETIME
fi
- eval "$ac_cv_use_apple_ieee"
+ eval "$ac_cv_use_datetime"
if test "$no_cache" != 1; then
- echo $ac_cv_use_apple_ieee >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_datetime >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_APPLE_IEEE" = yes; then
+ if test "$wxUSE_DATETIME" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-timedate"""... $ac_c" 1>&6
-echo "configure:2696: checking "for --enable-timedate"" >&5
+ echo $ac_n "checking for --enable-timedate""... $ac_c" 1>&6
+echo "configure:2967: checking for --enable-timedate" >&5
no_cache=0
# Check whether --enable-timedate or --disable-timedate was given.
if test "${enable_timedate+set}" = set; then
fi
- echo $ac_n "checking "for --enable-wave"""... $ac_c" 1>&6
-echo "configure:2735: checking "for --enable-wave"" >&5
+ echo $ac_n "checking for --enable-stopwatch""... $ac_c" 1>&6
+echo "configure:3006: checking for --enable-stopwatch" >&5
no_cache=0
- # Check whether --enable-wave or --disable-wave was given.
-if test "${enable_wave+set}" = set; then
- enableval="$enable_wave"
+ # Check whether --enable-stopwatch or --disable-stopwatch was given.
+if test "${enable_stopwatch+set}" = set; then
+ enableval="$enable_stopwatch"
if test "$enableval" = yes; then
- ac_cv_use_wave='wxUSE_WAVE=yes'
+ ac_cv_use_stopwatch='wxUSE_STOPWATCH=yes'
else
- ac_cv_use_wave='wxUSE_WAVE=no'
+ ac_cv_use_stopwatch='wxUSE_STOPWATCH=no'
fi
else
- LINE=`grep "wxUSE_WAVE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STOPWATCH" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_wave='wxUSE_WAVE='$DEFAULT_wxUSE_WAVE
+ ac_cv_use_stopwatch='wxUSE_STOPWATCH='$DEFAULT_wxUSE_STOPWATCH
fi
- eval "$ac_cv_use_wave"
+ eval "$ac_cv_use_stopwatch"
if test "$no_cache" != 1; then
- echo $ac_cv_use_wave >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_stopwatch >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_WAVE" = yes; then
+ if test "$wxUSE_STOPWATCH" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-fraction"""... $ac_c" 1>&6
-echo "configure:2774: checking "for --enable-fraction"" >&5
+ echo $ac_n "checking for --enable-dialupman""... $ac_c" 1>&6
+echo "configure:3045: checking for --enable-dialupman" >&5
no_cache=0
- # Check whether --enable-fraction or --disable-fraction was given.
-if test "${enable_fraction+set}" = set; then
- enableval="$enable_fraction"
+ # Check whether --enable-dialupman or --disable-dialupman was given.
+if test "${enable_dialupman+set}" = set; then
+ enableval="$enable_dialupman"
if test "$enableval" = yes; then
- ac_cv_use_fraction='wxUSE_FRACTION=yes'
+ ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=yes'
else
- ac_cv_use_fraction='wxUSE_FRACTION=no'
+ ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=no'
fi
else
- LINE=`grep "wxUSE_FRACTION" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_DIALUP_MANAGER" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_fraction='wxUSE_FRACTION='$DEFAULT_wxUSE_FRACTION
+ ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER='$DEFAULT_wxUSE_DIALUP_MANAGER
fi
- eval "$ac_cv_use_fraction"
+ eval "$ac_cv_use_dialupman"
if test "$no_cache" != 1; then
- echo $ac_cv_use_fraction >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_dialupman >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_FRACTION" = yes; then
+ if test "$wxUSE_DIALUP_MANAGER" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-dynlib"""... $ac_c" 1>&6
-echo "configure:2813: checking "for --enable-dynlib"" >&5
+ echo $ac_n "checking for --enable-apple_ieee""... $ac_c" 1>&6
+echo "configure:3084: checking for --enable-apple_ieee" >&5
no_cache=0
- # Check whether --enable-dynlib or --disable-dynlib was given.
-if test "${enable_dynlib+set}" = set; then
- enableval="$enable_dynlib"
+ # Check whether --enable-apple_ieee or --disable-apple_ieee was given.
+if test "${enable_apple_ieee+set}" = set; then
+ enableval="$enable_apple_ieee"
if test "$enableval" = yes; then
- ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=yes'
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=yes'
else
- ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=no'
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=no'
fi
else
- LINE=`grep "wxUSE_DYNLIB_CLASS" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_APPLE_IEEE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS='$DEFAULT_wxUSE_DYNLIB_CLASS
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE='$DEFAULT_wxUSE_APPLE_IEEE
fi
- eval "$ac_cv_use_dynlib"
+ eval "$ac_cv_use_apple_ieee"
if test "$no_cache" != 1; then
- echo $ac_cv_use_dynlib >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_apple_ieee >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_DYNLIB_CLASS" = yes; then
+ if test "$wxUSE_APPLE_IEEE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-longlong"""... $ac_c" 1>&6
-echo "configure:2852: checking "for --enable-longlong"" >&5
+ echo $ac_n "checking for --enable-timer""... $ac_c" 1>&6
+echo "configure:3123: checking for --enable-timer" >&5
no_cache=0
- # Check whether --enable-longlong or --disable-longlong was given.
-if test "${enable_longlong+set}" = set; then
- enableval="$enable_longlong"
+ # Check whether --enable-timer or --disable-timer was given.
+if test "${enable_timer+set}" = set; then
+ enableval="$enable_timer"
if test "$enableval" = yes; then
- ac_cv_use_longlong='wxUSE_LONGLONG=yes'
+ ac_cv_use_timer='wxUSE_TIMER=yes'
else
- ac_cv_use_longlong='wxUSE_LONGLONG=no'
+ ac_cv_use_timer='wxUSE_TIMER=no'
fi
else
- LINE=`grep "wxUSE_LONGLONG" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TIMER" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_longlong='wxUSE_LONGLONG='$DEFAULT_wxUSE_LONGLONG
+ ac_cv_use_timer='wxUSE_TIMER='$DEFAULT_wxUSE_TIMER
fi
- eval "$ac_cv_use_longlong"
+ eval "$ac_cv_use_timer"
if test "$no_cache" != 1; then
- echo $ac_cv_use_longlong >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_timer >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_LONGLONG" = yes; then
+ if test "$wxUSE_TIMER" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-log"""... $ac_c" 1>&6
-echo "configure:2891: checking "for --enable-log"" >&5
+ echo $ac_n "checking for --enable-wave""... $ac_c" 1>&6
+echo "configure:3162: checking for --enable-wave" >&5
no_cache=0
- # Check whether --enable-log or --disable-log was given.
-if test "${enable_log+set}" = set; then
- enableval="$enable_log"
+ # Check whether --enable-wave or --disable-wave was given.
+if test "${enable_wave+set}" = set; then
+ enableval="$enable_wave"
if test "$enableval" = yes; then
- ac_cv_use_log='wxUSE_LOG=yes'
+ ac_cv_use_wave='wxUSE_WAVE=yes'
else
- ac_cv_use_log='wxUSE_LOG=no'
+ ac_cv_use_wave='wxUSE_WAVE=no'
fi
else
- LINE=`grep "wxUSE_LOG" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_WAVE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_log='wxUSE_LOG='$DEFAULT_wxUSE_LOG
+ ac_cv_use_wave='wxUSE_WAVE='$DEFAULT_wxUSE_WAVE
fi
- eval "$ac_cv_use_log"
+ eval "$ac_cv_use_wave"
if test "$no_cache" != 1; then
- echo $ac_cv_use_log >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_wave >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_LOG" = yes; then
+ if test "$wxUSE_WAVE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-streams"""... $ac_c" 1>&6
-echo "configure:2930: checking "for --enable-streams"" >&5
+ echo $ac_n "checking for --enable-fraction""... $ac_c" 1>&6
+echo "configure:3201: checking for --enable-fraction" >&5
no_cache=0
- # Check whether --enable-streams or --disable-streams was given.
-if test "${enable_streams+set}" = set; then
- enableval="$enable_streams"
+ # Check whether --enable-fraction or --disable-fraction was given.
+if test "${enable_fraction+set}" = set; then
+ enableval="$enable_fraction"
if test "$enableval" = yes; then
- ac_cv_use_streams='wxUSE_STREAMS=yes'
+ ac_cv_use_fraction='wxUSE_FRACTION=yes'
else
- ac_cv_use_streams='wxUSE_STREAMS=no'
+ ac_cv_use_fraction='wxUSE_FRACTION=no'
fi
else
- LINE=`grep "wxUSE_STREAMS" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FRACTION" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_streams='wxUSE_STREAMS='$DEFAULT_wxUSE_STREAMS
+ ac_cv_use_fraction='wxUSE_FRACTION='$DEFAULT_wxUSE_FRACTION
fi
- eval "$ac_cv_use_streams"
+ eval "$ac_cv_use_fraction"
if test "$no_cache" != 1; then
- echo $ac_cv_use_streams >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_fraction >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_STREAMS" = yes; then
+ if test "$wxUSE_FRACTION" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-file"""... $ac_c" 1>&6
-echo "configure:2969: checking "for --enable-file"" >&5
+ echo $ac_n "checking for --enable-dynlib""... $ac_c" 1>&6
+echo "configure:3240: checking for --enable-dynlib" >&5
no_cache=0
- # Check whether --enable-file or --disable-file was given.
-if test "${enable_file+set}" = set; then
- enableval="$enable_file"
+ # Check whether --enable-dynlib or --disable-dynlib was given.
+if test "${enable_dynlib+set}" = set; then
+ enableval="$enable_dynlib"
if test "$enableval" = yes; then
- ac_cv_use_file='wxUSE_FILE=yes'
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=yes'
else
- ac_cv_use_file='wxUSE_FILE=no'
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=no'
fi
else
- LINE=`grep "wxUSE_FILE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_DYNLIB_CLASS" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_file='wxUSE_FILE='$DEFAULT_wxUSE_FILE
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS='$DEFAULT_wxUSE_DYNLIB_CLASS
fi
- eval "$ac_cv_use_file"
+ eval "$ac_cv_use_dynlib"
if test "$no_cache" != 1; then
- echo $ac_cv_use_file >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_dynlib >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_FILE" = yes; then
+ if test "$wxUSE_DYNLIB_CLASS" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-textfile"""... $ac_c" 1>&6
-echo "configure:3008: checking "for --enable-textfile"" >&5
+ echo $ac_n "checking for --enable-longlong""... $ac_c" 1>&6
+echo "configure:3279: checking for --enable-longlong" >&5
no_cache=0
- # Check whether --enable-textfile or --disable-textfile was given.
-if test "${enable_textfile+set}" = set; then
- enableval="$enable_textfile"
+ # Check whether --enable-longlong or --disable-longlong was given.
+if test "${enable_longlong+set}" = set; then
+ enableval="$enable_longlong"
if test "$enableval" = yes; then
- ac_cv_use_textfile='wxUSE_TEXTFILE=yes'
+ ac_cv_use_longlong='wxUSE_LONGLONG=yes'
else
- ac_cv_use_textfile='wxUSE_TEXTFILE=no'
+ ac_cv_use_longlong='wxUSE_LONGLONG=no'
fi
else
- LINE=`grep "wxUSE_TEXTFILE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_LONGLONG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_textfile='wxUSE_TEXTFILE='$DEFAULT_wxUSE_TEXTFILE
+ ac_cv_use_longlong='wxUSE_LONGLONG='$DEFAULT_wxUSE_LONGLONG
fi
- eval "$ac_cv_use_textfile"
+ eval "$ac_cv_use_longlong"
if test "$no_cache" != 1; then
- echo $ac_cv_use_textfile >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_longlong >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_TEXTFILE" = yes; then
+ if test "$wxUSE_LONGLONG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-unicode"""... $ac_c" 1>&6
-echo "configure:3047: checking "for --enable-unicode"" >&5
+ echo $ac_n "checking for --enable-geometry""... $ac_c" 1>&6
+echo "configure:3318: checking for --enable-geometry" >&5
no_cache=0
- # Check whether --enable-unicode or --disable-unicode was given.
-if test "${enable_unicode+set}" = set; then
- enableval="$enable_unicode"
+ # Check whether --enable-geometry or --disable-geometry was given.
+if test "${enable_geometry+set}" = set; then
+ enableval="$enable_geometry"
if test "$enableval" = yes; then
- ac_cv_use_unicode='wxUSE_UNICODE=yes'
+ ac_cv_use_geometry='wxUSE_GEOMETRY=yes'
else
- ac_cv_use_unicode='wxUSE_UNICODE=no'
+ ac_cv_use_geometry='wxUSE_GEOMETRY=no'
fi
else
- LINE=`grep "wxUSE_UNICODE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_GEOMETRY" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_unicode='wxUSE_UNICODE='$DEFAULT_wxUSE_UNICODE
+ ac_cv_use_geometry='wxUSE_GEOMETRY='$DEFAULT_wxUSE_GEOMETRY
fi
- eval "$ac_cv_use_unicode"
+ eval "$ac_cv_use_geometry"
if test "$no_cache" != 1; then
- echo $ac_cv_use_unicode >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_geometry >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_UNICODE" = yes; then
+ if test "$wxUSE_GEOMETRY" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-wcsrtombs"""... $ac_c" 1>&6
-echo "configure:3086: checking "for --enable-wcsrtombs"" >&5
+ echo $ac_n "checking for --enable-log""... $ac_c" 1>&6
+echo "configure:3357: checking for --enable-log" >&5
no_cache=0
- # Check whether --enable-wcsrtombs or --disable-wcsrtombs was given.
-if test "${enable_wcsrtombs+set}" = set; then
- enableval="$enable_wcsrtombs"
+ # Check whether --enable-log or --disable-log was given.
+if test "${enable_log+set}" = set; then
+ enableval="$enable_log"
if test "$enableval" = yes; then
- ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=yes'
+ ac_cv_use_log='wxUSE_LOG=yes'
else
- ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=no'
+ ac_cv_use_log='wxUSE_LOG=no'
fi
else
- LINE=`grep "wxUSE_WCSRTOMBS" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_LOG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS='$DEFAULT_wxUSE_WCSRTOMBS
+ ac_cv_use_log='wxUSE_LOG='$DEFAULT_wxUSE_LOG
fi
- eval "$ac_cv_use_wcsrtombs"
+ eval "$ac_cv_use_log"
if test "$no_cache" != 1; then
- echo $ac_cv_use_wcsrtombs >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_log >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_WCSRTOMBS" = yes; then
+ if test "$wxUSE_LOG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-wxprintfv"""... $ac_c" 1>&6
-echo "configure:3125: checking "for --enable-wxprintfv"" >&5
+ echo $ac_n "checking for --enable-streams""... $ac_c" 1>&6
+echo "configure:3396: checking for --enable-streams" >&5
no_cache=0
- # Check whether --enable-wxprintfv or --disable-wxprintfv was given.
-if test "${enable_wxprintfv+set}" = set; then
- enableval="$enable_wxprintfv"
+ # Check whether --enable-streams or --disable-streams was given.
+if test "${enable_streams+set}" = set; then
+ enableval="$enable_streams"
if test "$enableval" = yes; then
- ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=yes'
+ ac_cv_use_streams='wxUSE_STREAMS=yes'
else
- ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=no'
+ ac_cv_use_streams='wxUSE_STREAMS=no'
fi
else
- LINE=`grep "wxUSE_EXPERIMENTAL_PRINTF" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STREAMS" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF='$DEFAULT_wxUSE_EXPERIMENTAL_PRINTF
+ ac_cv_use_streams='wxUSE_STREAMS='$DEFAULT_wxUSE_STREAMS
fi
- eval "$ac_cv_use_wxprintfv"
+ eval "$ac_cv_use_streams"
if test "$no_cache" != 1; then
- echo $ac_cv_use_wxprintfv >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_streams >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_EXPERIMENTAL_PRINTF" = yes; then
+ if test "$wxUSE_STREAMS" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-joystick"""... $ac_c" 1>&6
-echo "configure:3164: checking "for --enable-joystick"" >&5
+ echo $ac_n "checking for --enable-file""... $ac_c" 1>&6
+echo "configure:3435: checking for --enable-file" >&5
no_cache=0
- # Check whether --enable-joystick or --disable-joystick was given.
-if test "${enable_joystick+set}" = set; then
- enableval="$enable_joystick"
+ # Check whether --enable-file or --disable-file was given.
+if test "${enable_file+set}" = set; then
+ enableval="$enable_file"
if test "$enableval" = yes; then
- ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
+ ac_cv_use_file='wxUSE_FILE=yes'
else
- ac_cv_use_joystick='wxUSE_JOYSTICK=no'
+ ac_cv_use_file='wxUSE_FILE=no'
fi
else
- LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FILE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
+ ac_cv_use_file='wxUSE_FILE='$DEFAULT_wxUSE_FILE
fi
- eval "$ac_cv_use_joystick"
+ eval "$ac_cv_use_file"
if test "$no_cache" != 1; then
- echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_file >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_JOYSTICK" = yes; then
+ if test "$wxUSE_FILE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-std_iostreams"""... $ac_c" 1>&6
-echo "configure:3203: checking "for --enable-std_iostreams"" >&5
+ echo $ac_n "checking for --enable-ffile""... $ac_c" 1>&6
+echo "configure:3474: checking for --enable-ffile" >&5
no_cache=0
- # Check whether --enable-std_iostreams or --disable-std_iostreams was given.
-if test "${enable_std_iostreams+set}" = set; then
- enableval="$enable_std_iostreams"
+ # Check whether --enable-ffile or --disable-ffile was given.
+if test "${enable_ffile+set}" = set; then
+ enableval="$enable_ffile"
if test "$enableval" = yes; then
- ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=yes'
+ ac_cv_use_ffile='wxUSE_FFILE=yes'
else
- ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=no'
+ ac_cv_use_ffile='wxUSE_FFILE=no'
fi
else
- LINE=`grep "wxUSE_STD_IOSTREAM" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FFILE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM='$DEFAULT_wxUSE_STD_IOSTREAM
+ ac_cv_use_ffile='wxUSE_FFILE='$DEFAULT_wxUSE_FFILE
fi
- eval "$ac_cv_use_std_iostreams"
+ eval "$ac_cv_use_ffile"
if test "$no_cache" != 1; then
- echo $ac_cv_use_std_iostreams >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_ffile >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_STD_IOSTREAM" = yes; then
+ if test "$wxUSE_FFILE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-filesystem"""... $ac_c" 1>&6
-echo "configure:3242: checking "for --enable-filesystem"" >&5
+ echo $ac_n "checking for --enable-textfile""... $ac_c" 1>&6
+echo "configure:3513: checking for --enable-textfile" >&5
no_cache=0
- # Check whether --enable-filesystem or --disable-filesystem was given.
-if test "${enable_filesystem+set}" = set; then
- enableval="$enable_filesystem"
+ # Check whether --enable-textfile or --disable-textfile was given.
+if test "${enable_textfile+set}" = set; then
+ enableval="$enable_textfile"
if test "$enableval" = yes; then
- ac_cv_use_filesystem='wxUSE_FILESYSTEM=yes'
+ ac_cv_use_textfile='wxUSE_TEXTFILE=yes'
else
- ac_cv_use_filesystem='wxUSE_FILESYSTEM=no'
+ ac_cv_use_textfile='wxUSE_TEXTFILE=no'
fi
else
- LINE=`grep "wxUSE_FILESYSTEM" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TEXTFILE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_filesystem='wxUSE_FILESYSTEM='$DEFAULT_wxUSE_FILESYSTEM
+ ac_cv_use_textfile='wxUSE_TEXTFILE='$DEFAULT_wxUSE_TEXTFILE
fi
- eval "$ac_cv_use_filesystem"
+ eval "$ac_cv_use_textfile"
if test "$no_cache" != 1; then
- echo $ac_cv_use_filesystem >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_textfile >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_FILESYSTEM" = yes; then
+ if test "$wxUSE_TEXTFILE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-fs_inet"""... $ac_c" 1>&6
-echo "configure:3281: checking "for --enable-fs_inet"" >&5
+ echo $ac_n "checking for --enable-fontmap""... $ac_c" 1>&6
+echo "configure:3552: checking for --enable-fontmap" >&5
no_cache=0
- # Check whether --enable-fs_inet or --disable-fs_inet was given.
-if test "${enable_fs_inet+set}" = set; then
- enableval="$enable_fs_inet"
+ # Check whether --enable-fontmap or --disable-fontmap was given.
+if test "${enable_fontmap+set}" = set; then
+ enableval="$enable_fontmap"
if test "$enableval" = yes; then
- ac_cv_use_fs_inet='wxUSE_FS_INET=yes'
+ ac_cv_use_fontmap='wxUSE_FONTMAP=yes'
else
- ac_cv_use_fs_inet='wxUSE_FS_INET=no'
+ ac_cv_use_fontmap='wxUSE_FONTMAP=no'
fi
else
- LINE=`grep "wxUSE_FS_INET" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FONTMAP" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_fs_inet='wxUSE_FS_INET='$DEFAULT_wxUSE_FS_INET
+ ac_cv_use_fontmap='wxUSE_FONTMAP='$DEFAULT_wxUSE_FONTMAP
fi
- eval "$ac_cv_use_fs_inet"
+ eval "$ac_cv_use_fontmap"
if test "$no_cache" != 1; then
- echo $ac_cv_use_fs_inet >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_fontmap >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_FS_INET" = yes; then
+ if test "$wxUSE_FONTMAP" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-fs_zip"""... $ac_c" 1>&6
-echo "configure:3320: checking "for --enable-fs_zip"" >&5
+ echo $ac_n "checking for --enable-unicode""... $ac_c" 1>&6
+echo "configure:3591: checking for --enable-unicode" >&5
no_cache=0
- # Check whether --enable-fs_zip or --disable-fs_zip was given.
-if test "${enable_fs_zip+set}" = set; then
- enableval="$enable_fs_zip"
+ # Check whether --enable-unicode or --disable-unicode was given.
+if test "${enable_unicode+set}" = set; then
+ enableval="$enable_unicode"
if test "$enableval" = yes; then
- ac_cv_use_fs_zip='wxUSE_FS_ZIP=yes'
+ ac_cv_use_unicode='wxUSE_UNICODE=yes'
else
- ac_cv_use_fs_zip='wxUSE_FS_ZIP=no'
+ ac_cv_use_unicode='wxUSE_UNICODE=no'
fi
else
- LINE=`grep "wxUSE_FS_ZIP" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_UNICODE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_fs_zip='wxUSE_FS_ZIP='$DEFAULT_wxUSE_FS_ZIP
+ ac_cv_use_unicode='wxUSE_UNICODE='$DEFAULT_wxUSE_UNICODE
fi
- eval "$ac_cv_use_fs_zip"
+ eval "$ac_cv_use_unicode"
if test "$no_cache" != 1; then
- echo $ac_cv_use_fs_zip >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_unicode >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_FS_ZIP" = yes; then
+ if test "$wxUSE_UNICODE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-zipstream"""... $ac_c" 1>&6
-echo "configure:3359: checking "for --enable-zipstream"" >&5
+ echo $ac_n "checking for --enable-wcsrtombs""... $ac_c" 1>&6
+echo "configure:3630: checking for --enable-wcsrtombs" >&5
no_cache=0
- # Check whether --enable-zipstream or --disable-zipstream was given.
-if test "${enable_zipstream+set}" = set; then
- enableval="$enable_zipstream"
+ # Check whether --enable-wcsrtombs or --disable-wcsrtombs was given.
+if test "${enable_wcsrtombs+set}" = set; then
+ enableval="$enable_wcsrtombs"
if test "$enableval" = yes; then
- ac_cv_use_zipstream='wxUSE_ZIPSTREAM=yes'
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=yes'
else
- ac_cv_use_zipstream='wxUSE_ZIPSTREAM=no'
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=no'
fi
else
- LINE=`grep "wxUSE_ZIPSTREAM" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_WCSRTOMBS" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_zipstream='wxUSE_ZIPSTREAM='$DEFAULT_wxUSE_ZIPSTREAM
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS='$DEFAULT_wxUSE_WCSRTOMBS
fi
- eval "$ac_cv_use_zipstream"
+ eval "$ac_cv_use_wcsrtombs"
if test "$no_cache" != 1; then
- echo $ac_cv_use_zipstream >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_wcsrtombs >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_ZIPSTREAM" = yes; then
+ if test "$wxUSE_WCSRTOMBS" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- echo $ac_n "checking "for --enable-catch_segvs"""... $ac_c" 1>&6
-echo "configure:3399: checking "for --enable-catch_segvs"" >&5
+ echo $ac_n "checking for --enable-wxprintfv""... $ac_c" 1>&6
+echo "configure:3669: checking for --enable-wxprintfv" >&5
no_cache=0
- # Check whether --enable-catch_segvs or --disable-catch_segvs was given.
-if test "${enable_catch_segvs+set}" = set; then
- enableval="$enable_catch_segvs"
+ # Check whether --enable-wxprintfv or --disable-wxprintfv was given.
+if test "${enable_wxprintfv+set}" = set; then
+ enableval="$enable_wxprintfv"
if test "$enableval" = yes; then
- ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION=yes'
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=yes'
else
- ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION=no'
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=no'
fi
else
- LINE=`grep "wxUSE_ON_FATAL_EXCEPTION" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_EXPERIMENTAL_PRINTF" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION='$DEFAULT_wxUSE_ON_FATAL_EXCEPTION
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF='$DEFAULT_wxUSE_EXPERIMENTAL_PRINTF
fi
- eval "$ac_cv_use_catch_segvs"
+ eval "$ac_cv_use_wxprintfv"
if test "$no_cache" != 1; then
- echo $ac_cv_use_catch_segvs >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_wxprintfv >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_ON_FATAL_EXCEPTION" = yes; then
+ if test "$wxUSE_EXPERIMENTAL_PRINTF" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
-
- echo $ac_n "checking "for --enable-threads"""... $ac_c" 1>&6
-echo "configure:3440: checking "for --enable-threads"" >&5
+ echo $ac_n "checking for --enable-std_iostreams""... $ac_c" 1>&6
+echo "configure:3708: checking for --enable-std_iostreams" >&5
no_cache=0
- # Check whether --enable-threads or --disable-threads was given.
-if test "${enable_threads+set}" = set; then
- enableval="$enable_threads"
+ # Check whether --enable-std_iostreams or --disable-std_iostreams was given.
+if test "${enable_std_iostreams+set}" = set; then
+ enableval="$enable_std_iostreams"
if test "$enableval" = yes; then
- ac_cv_use_threads='wxUSE_THREADS=yes'
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=yes'
else
- ac_cv_use_threads='wxUSE_THREADS=no'
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=no'
fi
else
- LINE=`grep "wxUSE_THREADS" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STD_IOSTREAM" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_threads='wxUSE_THREADS='$DEFAULT_wxUSE_THREADS
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM='$DEFAULT_wxUSE_STD_IOSTREAM
fi
- eval "$ac_cv_use_threads"
+ eval "$ac_cv_use_std_iostreams"
if test "$no_cache" != 1; then
- echo $ac_cv_use_threads >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_std_iostreams >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_THREADS" = yes; then
+ if test "$wxUSE_STD_IOSTREAM" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-serial"""... $ac_c" 1>&6
-echo "configure:3479: checking "for --enable-serial"" >&5
+ echo $ac_n "checking for --enable-filesystem""... $ac_c" 1>&6
+echo "configure:3747: checking for --enable-filesystem" >&5
no_cache=0
- # Check whether --enable-serial or --disable-serial was given.
-if test "${enable_serial+set}" = set; then
- enableval="$enable_serial"
+ # Check whether --enable-filesystem or --disable-filesystem was given.
+if test "${enable_filesystem+set}" = set; then
+ enableval="$enable_filesystem"
if test "$enableval" = yes; then
- ac_cv_use_serial='wxUSE_SERIAL=yes'
+ ac_cv_use_filesystem='wxUSE_FILESYSTEM=yes'
else
- ac_cv_use_serial='wxUSE_SERIAL=no'
+ ac_cv_use_filesystem='wxUSE_FILESYSTEM=no'
fi
else
- LINE=`grep "wxUSE_SERIAL" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FILESYSTEM" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_serial='wxUSE_SERIAL='$DEFAULT_wxUSE_SERIAL
+ ac_cv_use_filesystem='wxUSE_FILESYSTEM='$DEFAULT_wxUSE_FILESYSTEM
fi
- eval "$ac_cv_use_serial"
+ eval "$ac_cv_use_filesystem"
if test "$no_cache" != 1; then
- echo $ac_cv_use_serial >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_filesystem >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_SERIAL" = yes; then
+ if test "$wxUSE_FILESYSTEM" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test "$wxUSE_GUI" = "yes"; then
-
-
-
- echo $ac_n "checking "for --enable-docview"""... $ac_c" 1>&6
-echo "configure:3522: checking "for --enable-docview"" >&5
+ echo $ac_n "checking for --enable-fs_inet""... $ac_c" 1>&6
+echo "configure:3786: checking for --enable-fs_inet" >&5
no_cache=0
- # Check whether --enable-docview or --disable-docview was given.
-if test "${enable_docview+set}" = set; then
- enableval="$enable_docview"
+ # Check whether --enable-fs_inet or --disable-fs_inet was given.
+if test "${enable_fs_inet+set}" = set; then
+ enableval="$enable_fs_inet"
if test "$enableval" = yes; then
- ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=yes'
+ ac_cv_use_fs_inet='wxUSE_FS_INET=yes'
else
- ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=no'
+ ac_cv_use_fs_inet='wxUSE_FS_INET=no'
fi
else
- LINE=`grep "wxUSE_DOC_VIEW_ARCHITECTURE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FS_INET" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE='$DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE
+ ac_cv_use_fs_inet='wxUSE_FS_INET='$DEFAULT_wxUSE_FS_INET
fi
- eval "$ac_cv_use_docview"
+ eval "$ac_cv_use_fs_inet"
if test "$no_cache" != 1; then
- echo $ac_cv_use_docview >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_fs_inet >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_DOC_VIEW_ARCHITECTURE" = yes; then
+ if test "$wxUSE_FS_INET" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-help"""... $ac_c" 1>&6
-echo "configure:3561: checking "for --enable-help"" >&5
+ echo $ac_n "checking for --enable-fs_zip""... $ac_c" 1>&6
+echo "configure:3825: checking for --enable-fs_zip" >&5
no_cache=0
- # Check whether --enable-help or --disable-help was given.
-if test "${enable_help+set}" = set; then
- enableval="$enable_help"
+ # Check whether --enable-fs_zip or --disable-fs_zip was given.
+if test "${enable_fs_zip+set}" = set; then
+ enableval="$enable_fs_zip"
if test "$enableval" = yes; then
- ac_cv_use_help='wxUSE_HELP=yes'
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP=yes'
else
- ac_cv_use_help='wxUSE_HELP=no'
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP=no'
fi
else
- LINE=`grep "wxUSE_HELP" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FS_ZIP" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_help='wxUSE_HELP='$DEFAULT_wxUSE_HELP
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP='$DEFAULT_wxUSE_FS_ZIP
fi
- eval "$ac_cv_use_help"
+ eval "$ac_cv_use_fs_zip"
if test "$no_cache" != 1; then
- echo $ac_cv_use_help >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_fs_zip >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_HELP" = yes; then
+ if test "$wxUSE_FS_ZIP" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-constraints"""... $ac_c" 1>&6
-echo "configure:3600: checking "for --enable-constraints"" >&5
+ echo $ac_n "checking for --enable-zipstream""... $ac_c" 1>&6
+echo "configure:3864: checking for --enable-zipstream" >&5
no_cache=0
- # Check whether --enable-constraints or --disable-constraints was given.
-if test "${enable_constraints+set}" = set; then
- enableval="$enable_constraints"
+ # Check whether --enable-zipstream or --disable-zipstream was given.
+if test "${enable_zipstream+set}" = set; then
+ enableval="$enable_zipstream"
if test "$enableval" = yes; then
- ac_cv_use_constraints='wxUSE_CONSTRAINTS=yes'
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM=yes'
else
- ac_cv_use_constraints='wxUSE_CONSTRAINTS=no'
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM=no'
fi
else
- LINE=`grep "wxUSE_CONSTRAINTS" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_ZIPSTREAM" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_constraints='wxUSE_CONSTRAINTS='$DEFAULT_wxUSE_CONSTRAINTS
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM='$DEFAULT_wxUSE_ZIPSTREAM
fi
- eval "$ac_cv_use_constraints"
+ eval "$ac_cv_use_zipstream"
if test "$no_cache" != 1; then
- echo $ac_cv_use_constraints >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_zipstream >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_CONSTRAINTS" = yes; then
+ if test "$wxUSE_ZIPSTREAM" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-printarch"""... $ac_c" 1>&6
-echo "configure:3639: checking "for --enable-printarch"" >&5
+
+ echo $ac_n "checking for --enable-catch_segvs""... $ac_c" 1>&6
+echo "configure:3904: checking for --enable-catch_segvs" >&5
no_cache=0
- # Check whether --enable-printarch or --disable-printarch was given.
-if test "${enable_printarch+set}" = set; then
- enableval="$enable_printarch"
+ # Check whether --enable-catch_segvs or --disable-catch_segvs was given.
+if test "${enable_catch_segvs+set}" = set; then
+ enableval="$enable_catch_segvs"
if test "$enableval" = yes; then
- ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=yes'
+ ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION=yes'
else
- ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=no'
+ ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION=no'
fi
else
- LINE=`grep "wxUSE_PRINTING_ARCHITECTURE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_ON_FATAL_EXCEPTION" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE='$DEFAULT_wxUSE_PRINTING_ARCHITECTURE
+ ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION='$DEFAULT_wxUSE_ON_FATAL_EXCEPTION
fi
- eval "$ac_cv_use_printarch"
+ eval "$ac_cv_use_catch_segvs"
if test "$no_cache" != 1; then
- echo $ac_cv_use_printarch >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_catch_segvs >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_PRINTING_ARCHITECTURE" = yes; then
+ if test "$wxUSE_ON_FATAL_EXCEPTION" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-mdi"""... $ac_c" 1>&6
-echo "configure:3678: checking "for --enable-mdi"" >&5
+ echo $ac_n "checking for --enable-snglinst""... $ac_c" 1>&6
+echo "configure:3943: checking for --enable-snglinst" >&5
no_cache=0
- # Check whether --enable-mdi or --disable-mdi was given.
-if test "${enable_mdi+set}" = set; then
- enableval="$enable_mdi"
+ # Check whether --enable-snglinst or --disable-snglinst was given.
+if test "${enable_snglinst+set}" = set; then
+ enableval="$enable_snglinst"
if test "$enableval" = yes; then
- ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=yes'
+ ac_cv_use_snglinst='wxUSE_SNGLINST_CHECKER=yes'
else
- ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=no'
+ ac_cv_use_snglinst='wxUSE_SNGLINST_CHECKER=no'
fi
else
- LINE=`grep "wxUSE_MDI_ARCHITECTURE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_SNGLINST_CHECKER" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE='$DEFAULT_wxUSE_MDI_ARCHITECTURE
+ ac_cv_use_snglinst='wxUSE_SNGLINST_CHECKER='$DEFAULT_wxUSE_SNGLINST_CHECKER
fi
- eval "$ac_cv_use_mdi"
+ eval "$ac_cv_use_snglinst"
if test "$no_cache" != 1; then
- echo $ac_cv_use_mdi >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_snglinst >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_MDI_ARCHITECTURE" = yes; then
+ if test "$wxUSE_SNGLINST_CHECKER" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
- echo $ac_n "checking "for --enable-postscript"""... $ac_c" 1>&6
-echo "configure:3718: checking "for --enable-postscript"" >&5
+ echo $ac_n "checking for --enable-mimetype""... $ac_c" 1>&6
+echo "configure:3983: checking for --enable-mimetype" >&5
no_cache=0
- # Check whether --enable-postscript or --disable-postscript was given.
-if test "${enable_postscript+set}" = set; then
- enableval="$enable_postscript"
+ # Check whether --enable-mimetype or --disable-mimetype was given.
+if test "${enable_mimetype+set}" = set; then
+ enableval="$enable_mimetype"
if test "$enableval" = yes; then
- ac_cv_use_postscript='wxUSE_POSTSCRIPT=yes'
+ ac_cv_use_mimetype='wxUSE_MIMETYPE=yes'
else
- ac_cv_use_postscript='wxUSE_POSTSCRIPT=no'
+ ac_cv_use_mimetype='wxUSE_MIMETYPE=no'
fi
else
- LINE=`grep "wxUSE_POSTSCRIPT" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_MIMETYPE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_postscript='wxUSE_POSTSCRIPT='$DEFAULT_wxUSE_POSTSCRIPT
+ ac_cv_use_mimetype='wxUSE_MIMETYPE='$DEFAULT_wxUSE_MIMETYPE
fi
- eval "$ac_cv_use_postscript"
+ eval "$ac_cv_use_mimetype"
if test "$no_cache" != 1; then
- echo $ac_cv_use_postscript >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_mimetype >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_POSTSCRIPT" = yes; then
+ if test "$wxUSE_MIMETYPE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
- echo $ac_n "checking "for --enable-prologio"""... $ac_c" 1>&6
-echo "configure:3759: checking "for --enable-prologio"" >&5
+ echo $ac_n "checking for --enable-threads""... $ac_c" 1>&6
+echo "configure:4024: checking for --enable-threads" >&5
no_cache=0
- # Check whether --enable-prologio or --disable-prologio was given.
-if test "${enable_prologio+set}" = set; then
- enableval="$enable_prologio"
+ # Check whether --enable-threads or --disable-threads was given.
+if test "${enable_threads+set}" = set; then
+ enableval="$enable_threads"
if test "$enableval" = yes; then
- ac_cv_use_prologio='wxUSE_PROLOGIO=yes'
+ ac_cv_use_threads='wxUSE_THREADS=yes'
else
- ac_cv_use_prologio='wxUSE_PROLOGIO=no'
+ ac_cv_use_threads='wxUSE_THREADS=no'
fi
else
- LINE=`grep "wxUSE_PROLOGIO" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_THREADS" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_prologio='wxUSE_PROLOGIO='$DEFAULT_wxUSE_PROLOGIO
+ ac_cv_use_threads='wxUSE_THREADS='$DEFAULT_wxUSE_THREADS
fi
- eval "$ac_cv_use_prologio"
+ eval "$ac_cv_use_threads"
if test "$no_cache" != 1; then
- echo $ac_cv_use_prologio >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_threads >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_PROLOGIO" = yes; then
+ if test "$wxUSE_THREADS" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-resources"""... $ac_c" 1>&6
-echo "configure:3798: checking "for --enable-resources"" >&5
+ echo $ac_n "checking for --enable-serial""... $ac_c" 1>&6
+echo "configure:4063: checking for --enable-serial" >&5
no_cache=0
- # Check whether --enable-resources or --disable-resources was given.
-if test "${enable_resources+set}" = set; then
- enableval="$enable_resources"
+ # Check whether --enable-serial or --disable-serial was given.
+if test "${enable_serial+set}" = set; then
+ enableval="$enable_serial"
if test "$enableval" = yes; then
- ac_cv_use_resources='wxUSE_RESOURCES=yes'
+ ac_cv_use_serial='wxUSE_SERIAL=yes'
else
- ac_cv_use_resources='wxUSE_RESOURCES=no'
+ ac_cv_use_serial='wxUSE_SERIAL=no'
fi
else
- LINE=`grep "wxUSE_RESOURCES" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_SERIAL" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_resources='wxUSE_RESOURCES='$DEFAULT_wxUSE_RESOURCES
+ ac_cv_use_serial='wxUSE_SERIAL='$DEFAULT_wxUSE_SERIAL
fi
- eval "$ac_cv_use_resources"
+ eval "$ac_cv_use_serial"
if test "$no_cache" != 1; then
- echo $ac_cv_use_resources >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_serial >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_RESOURCES" = yes; then
+ if test "$wxUSE_SERIAL" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+if test "$wxUSE_GUI" = "yes"; then
+
- echo $ac_n "checking "for --enable-xresources"""... $ac_c" 1>&6
-echo "configure:3838: checking "for --enable-xresources"" >&5
+
+ echo $ac_n "checking for --enable-docview""... $ac_c" 1>&6
+echo "configure:4106: checking for --enable-docview" >&5
no_cache=0
- # Check whether --enable-xresources or --disable-xresources was given.
-if test "${enable_xresources+set}" = set; then
- enableval="$enable_xresources"
+ # Check whether --enable-docview or --disable-docview was given.
+if test "${enable_docview+set}" = set; then
+ enableval="$enable_docview"
if test "$enableval" = yes; then
- ac_cv_use_xresources='wxUSE_X_RESOURCES=yes'
+ ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=yes'
else
- ac_cv_use_xresources='wxUSE_X_RESOURCES=no'
+ ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=no'
fi
else
- LINE=`grep "wxUSE_X_RESOURCES" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_DOC_VIEW_ARCHITECTURE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_xresources='wxUSE_X_RESOURCES='$DEFAULT_wxUSE_X_RESOURCES
+ ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE='$DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE
fi
- eval "$ac_cv_use_xresources"
+ eval "$ac_cv_use_docview"
if test "$no_cache" != 1; then
- echo $ac_cv_use_xresources >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_docview >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_X_RESOURCES" = yes; then
+ if test "$wxUSE_DOC_VIEW_ARCHITECTURE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
-
- echo $ac_n "checking "for --enable-clipboard"""... $ac_c" 1>&6
-echo "configure:3879: checking "for --enable-clipboard"" >&5
+ echo $ac_n "checking for --enable-help""... $ac_c" 1>&6
+echo "configure:4145: checking for --enable-help" >&5
no_cache=0
- # Check whether --enable-clipboard or --disable-clipboard was given.
-if test "${enable_clipboard+set}" = set; then
- enableval="$enable_clipboard"
+ # Check whether --enable-help or --disable-help was given.
+if test "${enable_help+set}" = set; then
+ enableval="$enable_help"
if test "$enableval" = yes; then
- ac_cv_use_clipboard='wxUSE_CLIPBOARD=yes'
+ ac_cv_use_help='wxUSE_HELP=yes'
else
- ac_cv_use_clipboard='wxUSE_CLIPBOARD=no'
+ ac_cv_use_help='wxUSE_HELP=no'
fi
else
- LINE=`grep "wxUSE_CLIPBOARD" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_HELP" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_clipboard='wxUSE_CLIPBOARD='$DEFAULT_wxUSE_CLIPBOARD
+ ac_cv_use_help='wxUSE_HELP='$DEFAULT_wxUSE_HELP
fi
- eval "$ac_cv_use_clipboard"
+ eval "$ac_cv_use_help"
if test "$no_cache" != 1; then
- echo $ac_cv_use_clipboard >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_help >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_CLIPBOARD" = yes; then
+ if test "$wxUSE_HELP" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-dnd"""... $ac_c" 1>&6
-echo "configure:3918: checking "for --enable-dnd"" >&5
+ echo $ac_n "checking for --enable-constraints""... $ac_c" 1>&6
+echo "configure:4184: checking for --enable-constraints" >&5
no_cache=0
- # Check whether --enable-dnd or --disable-dnd was given.
-if test "${enable_dnd+set}" = set; then
- enableval="$enable_dnd"
+ # Check whether --enable-constraints or --disable-constraints was given.
+if test "${enable_constraints+set}" = set; then
+ enableval="$enable_constraints"
if test "$enableval" = yes; then
- ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=yes'
+ ac_cv_use_constraints='wxUSE_CONSTRAINTS=yes'
else
- ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=no'
+ ac_cv_use_constraints='wxUSE_CONSTRAINTS=no'
fi
else
- LINE=`grep "wxUSE_DRAG_AND_DROP" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_CONSTRAINTS" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_dnd='wxUSE_DRAG_AND_DROP='$DEFAULT_wxUSE_DRAG_AND_DROP
+ ac_cv_use_constraints='wxUSE_CONSTRAINTS='$DEFAULT_wxUSE_CONSTRAINTS
fi
- eval "$ac_cv_use_dnd"
+ eval "$ac_cv_use_constraints"
if test "$no_cache" != 1; then
- echo $ac_cv_use_dnd >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_constraints >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_DRAG_AND_DROP" = yes; then
+ if test "$wxUSE_CONSTRAINTS" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- echo $ac_n "checking "for --enable-wxtree"""... $ac_c" 1>&6
-echo "configure:3958: checking "for --enable-wxtree"" >&5
+ echo $ac_n "checking for --enable-printarch""... $ac_c" 1>&6
+echo "configure:4223: checking for --enable-printarch" >&5
no_cache=0
- # Check whether --enable-wxtree or --disable-wxtree was given.
-if test "${enable_wxtree+set}" = set; then
- enableval="$enable_wxtree"
+ # Check whether --enable-printarch or --disable-printarch was given.
+if test "${enable_printarch+set}" = set; then
+ enableval="$enable_printarch"
if test "$enableval" = yes; then
- ac_cv_use_wxtree='wxUSE_WXTREE=yes'
+ ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=yes'
else
- ac_cv_use_wxtree='wxUSE_WXTREE=no'
+ ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=no'
fi
else
- LINE=`grep "wxUSE_WXTREE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_PRINTING_ARCHITECTURE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_wxtree='wxUSE_WXTREE='$DEFAULT_wxUSE_WXTREE
+ ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE='$DEFAULT_wxUSE_PRINTING_ARCHITECTURE
fi
- eval "$ac_cv_use_wxtree"
+ eval "$ac_cv_use_printarch"
if test "$no_cache" != 1; then
- echo $ac_cv_use_wxtree >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_printarch >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_WXTREE" = yes; then
+ if test "$wxUSE_PRINTING_ARCHITECTURE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
-
- echo $ac_n "checking "for --enable-controls"""... $ac_c" 1>&6
-echo "configure:3999: checking "for --enable-controls"" >&5
+ echo $ac_n "checking for --enable-mdi""... $ac_c" 1>&6
+echo "configure:4262: checking for --enable-mdi" >&5
no_cache=0
- # Check whether --enable-controls or --disable-controls was given.
-if test "${enable_controls+set}" = set; then
- enableval="$enable_controls"
-
+ # Check whether --enable-mdi or --disable-mdi was given.
+if test "${enable_mdi+set}" = set; then
+ enableval="$enable_mdi"
+
if test "$enableval" = yes; then
- ac_cv_use_controls='wxUSE_CONTROLS=yes'
+ ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=yes'
else
- ac_cv_use_controls='wxUSE_CONTROLS=no'
+ ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=no'
fi
else
- LINE=`grep "wxUSE_CONTROLS" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_MDI_ARCHITECTURE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_controls='wxUSE_CONTROLS='$DEFAULT_wxUSE_CONTROLS
+ ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE='$DEFAULT_wxUSE_MDI_ARCHITECTURE
fi
- eval "$ac_cv_use_controls"
+ eval "$ac_cv_use_mdi"
if test "$no_cache" != 1; then
- echo $ac_cv_use_controls >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_mdi >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_CONTROLS" = yes; then
+ if test "$wxUSE_MDI_ARCHITECTURE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test "$wxUSE_CONTROLS" = "yes"; then
- DEFAULT_wxUSE_ACCEL=yes
- DEFAULT_wxUSE_CARET=yes
- DEFAULT_wxUSE_COMBOBOX=yes
- DEFAULT_wxUSE_BMPBUTTON=yes
- DEFAULT_wxUSE_CHECKBOX=yes
- DEFAULT_wxUSE_CHECKLISTBOX=yes
- DEFAULT_wxUSE_CHOICE=yes
- DEFAULT_wxUSE_GAUGE=yes
- DEFAULT_wxUSE_GRID=yes
- DEFAULT_wxUSE_NEW_GRID=yes
- DEFAULT_wxUSE_IMAGLIST=yes
- DEFAULT_wxUSE_LISTBOX=yes
- DEFAULT_wxUSE_LISTCTRL=yes
- DEFAULT_wxUSE_NOTEBOOK=yes
- DEFAULT_wxUSE_RADIOBOX=yes
- DEFAULT_wxUSE_RADIOBTN=yes
- DEFAULT_wxUSE_SASH=yes
- DEFAULT_wxUSE_SCROLLBAR=yes
- DEFAULT_wxUSE_SLIDER=yes
- DEFAULT_wxUSE_SPINBTN=yes
- DEFAULT_wxUSE_SPINCTRL=yes
- DEFAULT_wxUSE_SPLITTER=yes
- DEFAULT_wxUSE_STATBMP=yes
- DEFAULT_wxUSE_STATBOX=yes
- DEFAULT_wxUSE_STATLINE=yes
- DEFAULT_wxUSE_STATUSBAR=yes
- DEFAULT_wxUSE_TAB_DIALOG=yes
- DEFAULT_wxUSE_TOOLBAR=yes
- DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
- DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
- DEFAULT_wxUSE_TOOLTIPS=yes
- DEFAULT_wxUSE_TREECTRL=yes
-elif test "$wxUSE_CONTROLS" = "no"; then
- DEFAULT_wxUSE_ACCEL=no
- DEFAULT_wxUSE_CARET=no
- DEFAULT_wxUSE_COMBOBOX=no
- DEFAULT_wxUSE_BMPBUTTON=no
- DEFAULT_wxUSE_CHECKBOX=no
- DEFAULT_wxUSE_CHECKLISTBOX=no
- DEFAULT_wxUSE_CHOICE=no
- DEFAULT_wxUSE_GAUGE=no
- DEFAULT_wxUSE_GRID=no
- DEFAULT_wxUSE_NEW_GRID=no
- DEFAULT_wxUSE_IMAGLIST=no
- DEFAULT_wxUSE_LISTBOX=no
- DEFAULT_wxUSE_LISTCTRL=no
- DEFAULT_wxUSE_NOTEBOOK=no
- DEFAULT_wxUSE_RADIOBOX=no
- DEFAULT_wxUSE_RADIOBTN=no
- DEFAULT_wxUSE_SASH=no
- DEFAULT_wxUSE_SCROLLBAR=no
- DEFAULT_wxUSE_SLIDER=no
- DEFAULT_wxUSE_SPINBTN=no
- DEFAULT_wxUSE_SPINCTRL=no
- DEFAULT_wxUSE_SPLITTER=no
- DEFAULT_wxUSE_STATBMP=no
- DEFAULT_wxUSE_STATBOX=no
- DEFAULT_wxUSE_STATLINE=no
- DEFAULT_wxUSE_STATUSBAR=no
- DEFAULT_wxUSE_TAB_DIALOG=no
- DEFAULT_wxUSE_TOOLBAR=no
- DEFAULT_wxUSE_TOOLBAR_NATIVE=no
- DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
- DEFAULT_wxUSE_TOOLTIPS=no
- DEFAULT_wxUSE_TREECTRL=no
-fi
-
-
- echo $ac_n "checking "for --enable-accel"""... $ac_c" 1>&6
-echo "configure:4107: checking "for --enable-accel"" >&5
+ echo $ac_n "checking for --enable-loggui""... $ac_c" 1>&6
+echo "configure:4301: checking for --enable-loggui" >&5
no_cache=0
- # Check whether --enable-accel or --disable-accel was given.
-if test "${enable_accel+set}" = set; then
- enableval="$enable_accel"
+ # Check whether --enable-loggui or --disable-loggui was given.
+if test "${enable_loggui+set}" = set; then
+ enableval="$enable_loggui"
if test "$enableval" = yes; then
- ac_cv_use_accel='wxUSE_ACCEL=yes'
+ ac_cv_use_loggui='wxUSE_LOGGUI=yes'
else
- ac_cv_use_accel='wxUSE_ACCEL=no'
+ ac_cv_use_loggui='wxUSE_LOGGUI=no'
fi
else
- LINE=`grep "wxUSE_ACCEL" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_LOGGUI" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_accel='wxUSE_ACCEL='$DEFAULT_wxUSE_ACCEL
+ ac_cv_use_loggui='wxUSE_LOGGUI='$DEFAULT_wxUSE_LOGGUI
fi
- eval "$ac_cv_use_accel"
+ eval "$ac_cv_use_loggui"
if test "$no_cache" != 1; then
- echo $ac_cv_use_accel >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_loggui >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_ACCEL" = yes; then
+ if test "$wxUSE_LOGGUI" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-caret"""... $ac_c" 1>&6
-echo "configure:4146: checking "for --enable-caret"" >&5
+ echo $ac_n "checking for --enable-logwin""... $ac_c" 1>&6
+echo "configure:4340: checking for --enable-logwin" >&5
no_cache=0
- # Check whether --enable-caret or --disable-caret was given.
-if test "${enable_caret+set}" = set; then
- enableval="$enable_caret"
+ # Check whether --enable-logwin or --disable-logwin was given.
+if test "${enable_logwin+set}" = set; then
+ enableval="$enable_logwin"
if test "$enableval" = yes; then
- ac_cv_use_caret='wxUSE_CARET=yes'
+ ac_cv_use_logwin='wxUSE_LOGWINDOW=yes'
else
- ac_cv_use_caret='wxUSE_CARET=no'
+ ac_cv_use_logwin='wxUSE_LOGWINDOW=no'
fi
else
- LINE=`grep "wxUSE_CARET" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_LOGWINDOW" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_caret='wxUSE_CARET='$DEFAULT_wxUSE_CARET
+ ac_cv_use_logwin='wxUSE_LOGWINDOW='$DEFAULT_wxUSE_LOGWINDOW
fi
- eval "$ac_cv_use_caret"
+ eval "$ac_cv_use_logwin"
if test "$no_cache" != 1; then
- echo $ac_cv_use_caret >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_logwin >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_CARET" = yes; then
+ if test "$wxUSE_LOGWINDOW" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-bmpbutton"""... $ac_c" 1>&6
-echo "configure:4185: checking "for --enable-bmpbutton"" >&5
+
+ echo $ac_n "checking for --enable-postscript""... $ac_c" 1>&6
+echo "configure:4380: checking for --enable-postscript" >&5
no_cache=0
- # Check whether --enable-bmpbutton or --disable-bmpbutton was given.
-if test "${enable_bmpbutton+set}" = set; then
- enableval="$enable_bmpbutton"
+ # Check whether --enable-postscript or --disable-postscript was given.
+if test "${enable_postscript+set}" = set; then
+ enableval="$enable_postscript"
if test "$enableval" = yes; then
- ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=yes'
+ ac_cv_use_postscript='wxUSE_POSTSCRIPT=yes'
else
- ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=no'
+ ac_cv_use_postscript='wxUSE_POSTSCRIPT=no'
fi
else
- LINE=`grep "wxUSE_BMPBUTTON" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_POSTSCRIPT" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_bmpbutton='wxUSE_BMPBUTTON='$DEFAULT_wxUSE_BMPBUTTON
+ ac_cv_use_postscript='wxUSE_POSTSCRIPT='$DEFAULT_wxUSE_POSTSCRIPT
fi
- eval "$ac_cv_use_bmpbutton"
+ eval "$ac_cv_use_postscript"
if test "$no_cache" != 1; then
- echo $ac_cv_use_bmpbutton >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_postscript >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_BMPBUTTON" = yes; then
+ if test "$wxUSE_POSTSCRIPT" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-checkbox"""... $ac_c" 1>&6
-echo "configure:4224: checking "for --enable-checkbox"" >&5
+
+
+
+ echo $ac_n "checking for --enable-prologio""... $ac_c" 1>&6
+echo "configure:4422: checking for --enable-prologio" >&5
no_cache=0
- # Check whether --enable-checkbox or --disable-checkbox was given.
-if test "${enable_checkbox+set}" = set; then
- enableval="$enable_checkbox"
+ # Check whether --enable-prologio or --disable-prologio was given.
+if test "${enable_prologio+set}" = set; then
+ enableval="$enable_prologio"
if test "$enableval" = yes; then
- ac_cv_use_checkbox='wxUSE_CHECKBOX=yes'
+ ac_cv_use_prologio='wxUSE_PROLOGIO=yes'
else
- ac_cv_use_checkbox='wxUSE_CHECKBOX=no'
+ ac_cv_use_prologio='wxUSE_PROLOGIO=no'
fi
else
- LINE=`grep "wxUSE_CHECKBOX" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_PROLOGIO" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_checkbox='wxUSE_CHECKBOX='$DEFAULT_wxUSE_CHECKBOX
+ ac_cv_use_prologio='wxUSE_PROLOGIO='$DEFAULT_wxUSE_PROLOGIO
fi
- eval "$ac_cv_use_checkbox"
+ eval "$ac_cv_use_prologio"
if test "$no_cache" != 1; then
- echo $ac_cv_use_checkbox >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_prologio >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_CHECKBOX" = yes; then
+ if test "$wxUSE_PROLOGIO" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-checklst"""... $ac_c" 1>&6
-echo "configure:4263: checking "for --enable-checklst"" >&5
+ echo $ac_n "checking for --enable-resources""... $ac_c" 1>&6
+echo "configure:4461: checking for --enable-resources" >&5
no_cache=0
- # Check whether --enable-checklst or --disable-checklst was given.
-if test "${enable_checklst+set}" = set; then
- enableval="$enable_checklst"
+ # Check whether --enable-resources or --disable-resources was given.
+if test "${enable_resources+set}" = set; then
+ enableval="$enable_resources"
if test "$enableval" = yes; then
- ac_cv_use_checklst='wxUSE_CHECKLST=yes'
+ ac_cv_use_resources='wxUSE_RESOURCES=yes'
else
- ac_cv_use_checklst='wxUSE_CHECKLST=no'
+ ac_cv_use_resources='wxUSE_RESOURCES=no'
fi
else
- LINE=`grep "wxUSE_CHECKLST" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_RESOURCES" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_checklst='wxUSE_CHECKLST='$DEFAULT_wxUSE_CHECKLST
+ ac_cv_use_resources='wxUSE_RESOURCES='$DEFAULT_wxUSE_RESOURCES
fi
- eval "$ac_cv_use_checklst"
+ eval "$ac_cv_use_resources"
if test "$no_cache" != 1; then
- echo $ac_cv_use_checklst >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_resources >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_CHECKLST" = yes; then
+ if test "$wxUSE_RESOURCES" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-choice"""... $ac_c" 1>&6
-echo "configure:4302: checking "for --enable-choice"" >&5
+
+ echo $ac_n "checking for --enable-xresources""... $ac_c" 1>&6
+echo "configure:4501: checking for --enable-xresources" >&5
no_cache=0
- # Check whether --enable-choice or --disable-choice was given.
-if test "${enable_choice+set}" = set; then
- enableval="$enable_choice"
+ # Check whether --enable-xresources or --disable-xresources was given.
+if test "${enable_xresources+set}" = set; then
+ enableval="$enable_xresources"
if test "$enableval" = yes; then
- ac_cv_use_choice='wxUSE_CHOICE=yes'
+ ac_cv_use_xresources='wxUSE_X_RESOURCES=yes'
else
- ac_cv_use_choice='wxUSE_CHOICE=no'
+ ac_cv_use_xresources='wxUSE_X_RESOURCES=no'
fi
else
- LINE=`grep "wxUSE_CHOICE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_X_RESOURCES" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_choice='wxUSE_CHOICE='$DEFAULT_wxUSE_CHOICE
+ ac_cv_use_xresources='wxUSE_X_RESOURCES='$DEFAULT_wxUSE_X_RESOURCES
fi
- eval "$ac_cv_use_choice"
+ eval "$ac_cv_use_xresources"
if test "$no_cache" != 1; then
- echo $ac_cv_use_choice >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_xresources >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_CHOICE" = yes; then
+ if test "$wxUSE_X_RESOURCES" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-combobox"""... $ac_c" 1>&6
-echo "configure:4341: checking "for --enable-combobox"" >&5
+
+
+ echo $ac_n "checking for --enable-clipboard""... $ac_c" 1>&6
+echo "configure:4542: checking for --enable-clipboard" >&5
no_cache=0
- # Check whether --enable-combobox or --disable-combobox was given.
-if test "${enable_combobox+set}" = set; then
- enableval="$enable_combobox"
+ # Check whether --enable-clipboard or --disable-clipboard was given.
+if test "${enable_clipboard+set}" = set; then
+ enableval="$enable_clipboard"
if test "$enableval" = yes; then
- ac_cv_use_combobox='wxUSE_COMBOBOX=yes'
+ ac_cv_use_clipboard='wxUSE_CLIPBOARD=yes'
else
- ac_cv_use_combobox='wxUSE_COMBOBOX=no'
+ ac_cv_use_clipboard='wxUSE_CLIPBOARD=no'
fi
else
- LINE=`grep "wxUSE_COMBOBOX" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_CLIPBOARD" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_combobox='wxUSE_COMBOBOX='$DEFAULT_wxUSE_COMBOBOX
+ ac_cv_use_clipboard='wxUSE_CLIPBOARD='$DEFAULT_wxUSE_CLIPBOARD
fi
- eval "$ac_cv_use_combobox"
+ eval "$ac_cv_use_clipboard"
if test "$no_cache" != 1; then
- echo $ac_cv_use_combobox >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_clipboard >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_COMBOBOX" = yes; then
+ if test "$wxUSE_CLIPBOARD" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-gauge"""... $ac_c" 1>&6
-echo "configure:4380: checking "for --enable-gauge"" >&5
+ echo $ac_n "checking for --enable-dnd""... $ac_c" 1>&6
+echo "configure:4581: checking for --enable-dnd" >&5
no_cache=0
- # Check whether --enable-gauge or --disable-gauge was given.
-if test "${enable_gauge+set}" = set; then
- enableval="$enable_gauge"
+ # Check whether --enable-dnd or --disable-dnd was given.
+if test "${enable_dnd+set}" = set; then
+ enableval="$enable_dnd"
if test "$enableval" = yes; then
- ac_cv_use_gauge='wxUSE_GAUGE=yes'
+ ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=yes'
else
- ac_cv_use_gauge='wxUSE_GAUGE=no'
+ ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=no'
fi
else
- LINE=`grep "wxUSE_GAUGE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_DRAG_AND_DROP" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_gauge='wxUSE_GAUGE='$DEFAULT_wxUSE_GAUGE
+ ac_cv_use_dnd='wxUSE_DRAG_AND_DROP='$DEFAULT_wxUSE_DRAG_AND_DROP
fi
- eval "$ac_cv_use_gauge"
+ eval "$ac_cv_use_dnd"
if test "$no_cache" != 1; then
- echo $ac_cv_use_gauge >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_dnd >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_GAUGE" = yes; then
+ if test "$wxUSE_DRAG_AND_DROP" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-grid"""... $ac_c" 1>&6
-echo "configure:4419: checking "for --enable-grid"" >&5
+ echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
+echo "configure:4620: checking for --enable-metafile" >&5
no_cache=0
- # Check whether --enable-grid or --disable-grid was given.
-if test "${enable_grid+set}" = set; then
- enableval="$enable_grid"
+ # Check whether --enable-metafile or --disable-metafile was given.
+if test "${enable_metafile+set}" = set; then
+ enableval="$enable_metafile"
if test "$enableval" = yes; then
- ac_cv_use_grid='wxUSE_GRID=yes'
+ ac_cv_use_metafile='wxUSE_METAFILE=yes'
else
- ac_cv_use_grid='wxUSE_GRID=no'
+ ac_cv_use_metafile='wxUSE_METAFILE=no'
fi
else
- LINE=`grep "wxUSE_GRID" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_METAFILE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_grid='wxUSE_GRID='$DEFAULT_wxUSE_GRID
+ ac_cv_use_metafile='wxUSE_METAFILE='$DEFAULT_wxUSE_METAFILE
fi
- eval "$ac_cv_use_grid"
+ eval "$ac_cv_use_metafile"
if test "$no_cache" != 1; then
- echo $ac_cv_use_grid >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_metafile >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_GRID" = yes; then
+ if test "$wxUSE_METAFILE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-newgrid"""... $ac_c" 1>&6
-echo "configure:4458: checking "for --enable-newgrid"" >&5
+
+ echo $ac_n "checking for --enable-wxtree""... $ac_c" 1>&6
+echo "configure:4660: checking for --enable-wxtree" >&5
no_cache=0
- # Check whether --enable-newgrid or --disable-newgrid was given.
-if test "${enable_newgrid+set}" = set; then
- enableval="$enable_newgrid"
+ # Check whether --enable-wxtree or --disable-wxtree was given.
+if test "${enable_wxtree+set}" = set; then
+ enableval="$enable_wxtree"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wxtree='wxUSE_WXTREE=yes'
+ else
+ ac_cv_use_wxtree='wxUSE_WXTREE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WXTREE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wxtree='wxUSE_WXTREE='$DEFAULT_wxUSE_WXTREE
+
+fi
+
+
+ eval "$ac_cv_use_wxtree"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wxtree >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WXTREE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-controls""... $ac_c" 1>&6
+echo "configure:4701: checking for --enable-controls" >&5
+ no_cache=0
+ # Check whether --enable-controls or --disable-controls was given.
+if test "${enable_controls+set}" = set; then
+ enableval="$enable_controls"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_controls='wxUSE_CONTROLS=yes'
+ else
+ ac_cv_use_controls='wxUSE_CONTROLS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CONTROLS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_controls='wxUSE_CONTROLS='$DEFAULT_wxUSE_CONTROLS
+
+fi
+
+
+ eval "$ac_cv_use_controls"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_controls >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CONTROLS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+if test "$wxUSE_CONTROLS" = "yes"; then
+ DEFAULT_wxUSE_ACCEL=yes
+ DEFAULT_wxUSE_BMPBUTTON=yes
+ DEFAULT_wxUSE_BUTTON=yes
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=yes
+ DEFAULT_wxUSE_COMBOBOX=yes
+ DEFAULT_wxUSE_CHECKBOX=yes
+ DEFAULT_wxUSE_CHECKLISTBOX=yes
+ DEFAULT_wxUSE_CHOICE=yes
+ DEFAULT_wxUSE_GAUGE=yes
+ DEFAULT_wxUSE_GRID=yes
+ DEFAULT_wxUSE_NEW_GRID=yes
+ DEFAULT_wxUSE_IMAGLIST=yes
+ DEFAULT_wxUSE_LISTBOX=yes
+ DEFAULT_wxUSE_LISTCTRL=yes
+ DEFAULT_wxUSE_NOTEBOOK=yes
+ DEFAULT_wxUSE_RADIOBOX=yes
+ DEFAULT_wxUSE_RADIOBTN=yes
+ DEFAULT_wxUSE_SASH=yes
+ DEFAULT_wxUSE_SCROLLBAR=yes
+ DEFAULT_wxUSE_SLIDER=yes
+ DEFAULT_wxUSE_SPINBTN=yes
+ DEFAULT_wxUSE_SPINCTRL=yes
+ DEFAULT_wxUSE_SPLITTER=yes
+ DEFAULT_wxUSE_STATBMP=yes
+ DEFAULT_wxUSE_STATBOX=yes
+ DEFAULT_wxUSE_STATLINE=yes
+ DEFAULT_wxUSE_STATUSBAR=yes
+ DEFAULT_wxUSE_TAB_DIALOG=yes
+ DEFAULT_wxUSE_TOGGLEBTN=yes
+ DEFAULT_wxUSE_TOOLBAR=yes
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
+ DEFAULT_wxUSE_TOOLTIPS=yes
+ DEFAULT_wxUSE_TREECTRL=yes
+elif test "$wxUSE_CONTROLS" = "no"; then
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_BUTTON=no
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLISTBOX=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPINCTRL=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATUSBAR=no
+ DEFAULT_wxUSE_TAB_DIALOG=no
+ DEFAULT_wxUSE_TOGGLEBTN=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=no
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_TREECTRL=no
+fi
+
+
+ echo $ac_n "checking for --enable-accel""... $ac_c" 1>&6
+echo "configure:4815: checking for --enable-accel" >&5
+ no_cache=0
+ # Check whether --enable-accel or --disable-accel was given.
+if test "${enable_accel+set}" = set; then
+ enableval="$enable_accel"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_accel='wxUSE_ACCEL=yes'
+ else
+ ac_cv_use_accel='wxUSE_ACCEL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ACCEL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_accel='wxUSE_ACCEL='$DEFAULT_wxUSE_ACCEL
+
+fi
+
+
+ eval "$ac_cv_use_accel"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_accel >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ACCEL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-button""... $ac_c" 1>&6
+echo "configure:4854: checking for --enable-button" >&5
+ no_cache=0
+ # Check whether --enable-button or --disable-button was given.
+if test "${enable_button+set}" = set; then
+ enableval="$enable_button"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_button='wxUSE_BUTTON=yes'
+ else
+ ac_cv_use_button='wxUSE_BUTTON=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BUTTON" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_button='wxUSE_BUTTON='$DEFAULT_wxUSE_BUTTON
+
+fi
+
+
+ eval "$ac_cv_use_button"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_button >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BUTTON" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-bmpbutton""... $ac_c" 1>&6
+echo "configure:4893: checking for --enable-bmpbutton" >&5
+ no_cache=0
+ # Check whether --enable-bmpbutton or --disable-bmpbutton was given.
+if test "${enable_bmpbutton+set}" = set; then
+ enableval="$enable_bmpbutton"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=yes'
+ else
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BMPBUTTON" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON='$DEFAULT_wxUSE_BMPBUTTON
+
+fi
+
+
+ eval "$ac_cv_use_bmpbutton"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_bmpbutton >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BMPBUTTON" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-calendar""... $ac_c" 1>&6
+echo "configure:4932: checking for --enable-calendar" >&5
+ no_cache=0
+ # Check whether --enable-calendar or --disable-calendar was given.
+if test "${enable_calendar+set}" = set; then
+ enableval="$enable_calendar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_calendar='wxUSE_CALCTRL=yes'
+ else
+ ac_cv_use_calendar='wxUSE_CALCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CALCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_calendar='wxUSE_CALCTRL='$DEFAULT_wxUSE_CALCTRL
+
+fi
+
+
+ eval "$ac_cv_use_calendar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_calendar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CALCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-caret""... $ac_c" 1>&6
+echo "configure:4971: checking for --enable-caret" >&5
+ no_cache=0
+ # Check whether --enable-caret or --disable-caret was given.
+if test "${enable_caret+set}" = set; then
+ enableval="$enable_caret"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_caret='wxUSE_CARET=yes'
+ else
+ ac_cv_use_caret='wxUSE_CARET=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CARET" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_caret='wxUSE_CARET='$DEFAULT_wxUSE_CARET
+
+fi
+
+
+ eval "$ac_cv_use_caret"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_caret >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CARET" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-checkbox""... $ac_c" 1>&6
+echo "configure:5010: checking for --enable-checkbox" >&5
+ no_cache=0
+ # Check whether --enable-checkbox or --disable-checkbox was given.
+if test "${enable_checkbox+set}" = set; then
+ enableval="$enable_checkbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_checkbox='wxUSE_CHECKBOX=yes'
+ else
+ ac_cv_use_checkbox='wxUSE_CHECKBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHECKBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_checkbox='wxUSE_CHECKBOX='$DEFAULT_wxUSE_CHECKBOX
+
+fi
+
+
+ eval "$ac_cv_use_checkbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_checkbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHECKBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-checklst""... $ac_c" 1>&6
+echo "configure:5049: checking for --enable-checklst" >&5
+ no_cache=0
+ # Check whether --enable-checklst or --disable-checklst was given.
+if test "${enable_checklst+set}" = set; then
+ enableval="$enable_checklst"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_checklst='wxUSE_CHECKLST=yes'
+ else
+ ac_cv_use_checklst='wxUSE_CHECKLST=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHECKLST" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_checklst='wxUSE_CHECKLST='$DEFAULT_wxUSE_CHECKLST
+
+fi
+
+
+ eval "$ac_cv_use_checklst"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_checklst >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHECKLST" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-choice""... $ac_c" 1>&6
+echo "configure:5088: checking for --enable-choice" >&5
+ no_cache=0
+ # Check whether --enable-choice or --disable-choice was given.
+if test "${enable_choice+set}" = set; then
+ enableval="$enable_choice"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_choice='wxUSE_CHOICE=yes'
+ else
+ ac_cv_use_choice='wxUSE_CHOICE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHOICE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_choice='wxUSE_CHOICE='$DEFAULT_wxUSE_CHOICE
+
+fi
+
+
+ eval "$ac_cv_use_choice"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_choice >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHOICE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-combobox""... $ac_c" 1>&6
+echo "configure:5127: checking for --enable-combobox" >&5
+ no_cache=0
+ # Check whether --enable-combobox or --disable-combobox was given.
+if test "${enable_combobox+set}" = set; then
+ enableval="$enable_combobox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_combobox='wxUSE_COMBOBOX=yes'
+ else
+ ac_cv_use_combobox='wxUSE_COMBOBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COMBOBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_combobox='wxUSE_COMBOBOX='$DEFAULT_wxUSE_COMBOBOX
+
+fi
+
+
+ eval "$ac_cv_use_combobox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_combobox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COMBOBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-gauge""... $ac_c" 1>&6
+echo "configure:5166: checking for --enable-gauge" >&5
+ no_cache=0
+ # Check whether --enable-gauge or --disable-gauge was given.
+if test "${enable_gauge+set}" = set; then
+ enableval="$enable_gauge"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gauge='wxUSE_GAUGE=yes'
+ else
+ ac_cv_use_gauge='wxUSE_GAUGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GAUGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gauge='wxUSE_GAUGE='$DEFAULT_wxUSE_GAUGE
+
+fi
+
+
+ eval "$ac_cv_use_gauge"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gauge >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GAUGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-grid""... $ac_c" 1>&6
+echo "configure:5205: checking for --enable-grid" >&5
+ no_cache=0
+ # Check whether --enable-grid or --disable-grid was given.
+if test "${enable_grid+set}" = set; then
+ enableval="$enable_grid"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_grid='wxUSE_GRID=yes'
+ else
+ ac_cv_use_grid='wxUSE_GRID=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GRID" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_grid='wxUSE_GRID='$DEFAULT_wxUSE_GRID
+
+fi
+
+
+ eval "$ac_cv_use_grid"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_grid >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GRID" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-newgrid""... $ac_c" 1>&6
+echo "configure:5244: checking for --enable-newgrid" >&5
+ no_cache=0
+ # Check whether --enable-newgrid or --disable-newgrid was given.
+if test "${enable_newgrid+set}" = set; then
+ enableval="$enable_newgrid"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_newgrid='wxUSE_NEW_GRID=yes'
+ else
+ ac_cv_use_newgrid='wxUSE_NEW_GRID=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NEW_GRID" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_newgrid='wxUSE_NEW_GRID='$DEFAULT_wxUSE_NEW_GRID
+
+fi
+
+
+ eval "$ac_cv_use_newgrid"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_newgrid >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NEW_GRID" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-imaglist""... $ac_c" 1>&6
+echo "configure:5283: checking for --enable-imaglist" >&5
+ no_cache=0
+ # Check whether --enable-imaglist or --disable-imaglist was given.
+if test "${enable_imaglist+set}" = set; then
+ enableval="$enable_imaglist"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_imaglist='wxUSE_IMAGLIST=yes'
+ else
+ ac_cv_use_imaglist='wxUSE_IMAGLIST=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IMAGLIST" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_imaglist='wxUSE_IMAGLIST='$DEFAULT_wxUSE_IMAGLIST
+
+fi
+
+
+ eval "$ac_cv_use_imaglist"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_imaglist >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IMAGLIST" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-listbox""... $ac_c" 1>&6
+echo "configure:5322: checking for --enable-listbox" >&5
+ no_cache=0
+ # Check whether --enable-listbox or --disable-listbox was given.
+if test "${enable_listbox+set}" = set; then
+ enableval="$enable_listbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_listbox='wxUSE_LISTBOX=yes'
+ else
+ ac_cv_use_listbox='wxUSE_LISTBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LISTBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_listbox='wxUSE_LISTBOX='$DEFAULT_wxUSE_LISTBOX
+
+fi
+
+
+ eval "$ac_cv_use_listbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_listbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LISTBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-listctrl""... $ac_c" 1>&6
+echo "configure:5361: checking for --enable-listctrl" >&5
+ no_cache=0
+ # Check whether --enable-listctrl or --disable-listctrl was given.
+if test "${enable_listctrl+set}" = set; then
+ enableval="$enable_listctrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_listctrl='wxUSE_LISTCTRL=yes'
+ else
+ ac_cv_use_listctrl='wxUSE_LISTCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LISTCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_listctrl='wxUSE_LISTCTRL='$DEFAULT_wxUSE_LISTCTRL
+
+fi
+
+
+ eval "$ac_cv_use_listctrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_listctrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LISTCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-notebook""... $ac_c" 1>&6
+echo "configure:5400: checking for --enable-notebook" >&5
+ no_cache=0
+ # Check whether --enable-notebook or --disable-notebook was given.
+if test "${enable_notebook+set}" = set; then
+ enableval="$enable_notebook"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_notebook='wxUSE_NOTEBOOK=yes'
+ else
+ ac_cv_use_notebook='wxUSE_NOTEBOOK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NOTEBOOK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_notebook='wxUSE_NOTEBOOK='$DEFAULT_wxUSE_NOTEBOOK
+
+fi
+
+
+ eval "$ac_cv_use_notebook"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_notebook >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NOTEBOOK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-radiobox""... $ac_c" 1>&6
+echo "configure:5439: checking for --enable-radiobox" >&5
+ no_cache=0
+ # Check whether --enable-radiobox or --disable-radiobox was given.
+if test "${enable_radiobox+set}" = set; then
+ enableval="$enable_radiobox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_radiobox='wxUSE_RADIOBOX=yes'
+ else
+ ac_cv_use_radiobox='wxUSE_RADIOBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_RADIOBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_radiobox='wxUSE_RADIOBOX='$DEFAULT_wxUSE_RADIOBOX
+
+fi
+
+
+ eval "$ac_cv_use_radiobox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_radiobox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_RADIOBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-radiobtn""... $ac_c" 1>&6
+echo "configure:5478: checking for --enable-radiobtn" >&5
+ no_cache=0
+ # Check whether --enable-radiobtn or --disable-radiobtn was given.
+if test "${enable_radiobtn+set}" = set; then
+ enableval="$enable_radiobtn"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN=yes'
+ else
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_RADIOBTN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN='$DEFAULT_wxUSE_RADIOBTN
+
+fi
+
+
+ eval "$ac_cv_use_radiobtn"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_radiobtn >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_RADIOBTN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-sash""... $ac_c" 1>&6
+echo "configure:5517: checking for --enable-sash" >&5
+ no_cache=0
+ # Check whether --enable-sash or --disable-sash was given.
+if test "${enable_sash+set}" = set; then
+ enableval="$enable_sash"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_sash='wxUSE_SASH=yes'
+ else
+ ac_cv_use_sash='wxUSE_SASH=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SASH" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_sash='wxUSE_SASH='$DEFAULT_wxUSE_SASH
+
+fi
+
+
+ eval "$ac_cv_use_sash"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_sash >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SASH" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-scrollbar""... $ac_c" 1>&6
+echo "configure:5556: checking for --enable-scrollbar" >&5
+ no_cache=0
+ # Check whether --enable-scrollbar or --disable-scrollbar was given.
+if test "${enable_scrollbar+set}" = set; then
+ enableval="$enable_scrollbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR=yes'
+ else
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SCROLLBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR='$DEFAULT_wxUSE_SCROLLBAR
+
+fi
+
+
+ eval "$ac_cv_use_scrollbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_scrollbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SCROLLBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-slider""... $ac_c" 1>&6
+echo "configure:5595: checking for --enable-slider" >&5
+ no_cache=0
+ # Check whether --enable-slider or --disable-slider was given.
+if test "${enable_slider+set}" = set; then
+ enableval="$enable_slider"
if test "$enableval" = yes; then
- ac_cv_use_newgrid='wxUSE_NEW_GRID=yes'
+ ac_cv_use_slider='wxUSE_SLIDER=yes'
else
- ac_cv_use_newgrid='wxUSE_NEW_GRID=no'
+ ac_cv_use_slider='wxUSE_SLIDER=no'
fi
else
- LINE=`grep "wxUSE_NEW_GRID" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_SLIDER" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_newgrid='wxUSE_NEW_GRID='$DEFAULT_wxUSE_NEW_GRID
+ ac_cv_use_slider='wxUSE_SLIDER='$DEFAULT_wxUSE_SLIDER
fi
- eval "$ac_cv_use_newgrid"
+ eval "$ac_cv_use_slider"
if test "$no_cache" != 1; then
- echo $ac_cv_use_newgrid >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_slider >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_NEW_GRID" = yes; then
+ if test "$wxUSE_SLIDER" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-imaglist"""... $ac_c" 1>&6
-echo "configure:4497: checking "for --enable-imaglist"" >&5
+ echo $ac_n "checking for --enable-spinbtn""... $ac_c" 1>&6
+echo "configure:5634: checking for --enable-spinbtn" >&5
no_cache=0
- # Check whether --enable-imaglist or --disable-imaglist was given.
-if test "${enable_imaglist+set}" = set; then
- enableval="$enable_imaglist"
+ # Check whether --enable-spinbtn or --disable-spinbtn was given.
+if test "${enable_spinbtn+set}" = set; then
+ enableval="$enable_spinbtn"
if test "$enableval" = yes; then
- ac_cv_use_imaglist='wxUSE_IMAGLIST=yes'
+ ac_cv_use_spinbtn='wxUSE_SPINBTN=yes'
else
- ac_cv_use_imaglist='wxUSE_IMAGLIST=no'
+ ac_cv_use_spinbtn='wxUSE_SPINBTN=no'
fi
else
- LINE=`grep "wxUSE_IMAGLIST" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_SPINBTN" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_imaglist='wxUSE_IMAGLIST='$DEFAULT_wxUSE_IMAGLIST
+ ac_cv_use_spinbtn='wxUSE_SPINBTN='$DEFAULT_wxUSE_SPINBTN
fi
- eval "$ac_cv_use_imaglist"
+ eval "$ac_cv_use_spinbtn"
if test "$no_cache" != 1; then
- echo $ac_cv_use_imaglist >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_spinbtn >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_IMAGLIST" = yes; then
+ if test "$wxUSE_SPINBTN" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-listbox"""... $ac_c" 1>&6
-echo "configure:4536: checking "for --enable-listbox"" >&5
+ echo $ac_n "checking for --enable-spinctrl""... $ac_c" 1>&6
+echo "configure:5673: checking for --enable-spinctrl" >&5
no_cache=0
- # Check whether --enable-listbox or --disable-listbox was given.
-if test "${enable_listbox+set}" = set; then
- enableval="$enable_listbox"
+ # Check whether --enable-spinctrl or --disable-spinctrl was given.
+if test "${enable_spinctrl+set}" = set; then
+ enableval="$enable_spinctrl"
if test "$enableval" = yes; then
- ac_cv_use_listbox='wxUSE_LISTBOX=yes'
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL=yes'
else
- ac_cv_use_listbox='wxUSE_LISTBOX=no'
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL=no'
fi
else
- LINE=`grep "wxUSE_LISTBOX" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_SPINCTRL" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_listbox='wxUSE_LISTBOX='$DEFAULT_wxUSE_LISTBOX
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL='$DEFAULT_wxUSE_SPINCTRL
fi
- eval "$ac_cv_use_listbox"
+ eval "$ac_cv_use_spinctrl"
if test "$no_cache" != 1; then
- echo $ac_cv_use_listbox >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_spinctrl >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_LISTBOX" = yes; then
+ if test "$wxUSE_SPINCTRL" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-listctrl"""... $ac_c" 1>&6
-echo "configure:4575: checking "for --enable-listctrl"" >&5
+ echo $ac_n "checking for --enable-splitter""... $ac_c" 1>&6
+echo "configure:5712: checking for --enable-splitter" >&5
no_cache=0
- # Check whether --enable-listctrl or --disable-listctrl was given.
-if test "${enable_listctrl+set}" = set; then
- enableval="$enable_listctrl"
+ # Check whether --enable-splitter or --disable-splitter was given.
+if test "${enable_splitter+set}" = set; then
+ enableval="$enable_splitter"
if test "$enableval" = yes; then
- ac_cv_use_listctrl='wxUSE_LISTCTRL=yes'
+ ac_cv_use_splitter='wxUSE_SPLITTER=yes'
else
- ac_cv_use_listctrl='wxUSE_LISTCTRL=no'
+ ac_cv_use_splitter='wxUSE_SPLITTER=no'
fi
else
- LINE=`grep "wxUSE_LISTCTRL" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_SPLITTER" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_listctrl='wxUSE_LISTCTRL='$DEFAULT_wxUSE_LISTCTRL
+ ac_cv_use_splitter='wxUSE_SPLITTER='$DEFAULT_wxUSE_SPLITTER
fi
- eval "$ac_cv_use_listctrl"
+ eval "$ac_cv_use_splitter"
if test "$no_cache" != 1; then
- echo $ac_cv_use_listctrl >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_splitter >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_LISTCTRL" = yes; then
+ if test "$wxUSE_SPLITTER" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-notebook"""... $ac_c" 1>&6
-echo "configure:4614: checking "for --enable-notebook"" >&5
+ echo $ac_n "checking for --enable-statbmp""... $ac_c" 1>&6
+echo "configure:5751: checking for --enable-statbmp" >&5
no_cache=0
- # Check whether --enable-notebook or --disable-notebook was given.
-if test "${enable_notebook+set}" = set; then
- enableval="$enable_notebook"
+ # Check whether --enable-statbmp or --disable-statbmp was given.
+if test "${enable_statbmp+set}" = set; then
+ enableval="$enable_statbmp"
if test "$enableval" = yes; then
- ac_cv_use_notebook='wxUSE_NOTEBOOK=yes'
+ ac_cv_use_statbmp='wxUSE_STATBMP=yes'
else
- ac_cv_use_notebook='wxUSE_NOTEBOOK=no'
+ ac_cv_use_statbmp='wxUSE_STATBMP=no'
fi
else
- LINE=`grep "wxUSE_NOTEBOOK" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STATBMP" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_notebook='wxUSE_NOTEBOOK='$DEFAULT_wxUSE_NOTEBOOK
+ ac_cv_use_statbmp='wxUSE_STATBMP='$DEFAULT_wxUSE_STATBMP
fi
- eval "$ac_cv_use_notebook"
+ eval "$ac_cv_use_statbmp"
if test "$no_cache" != 1; then
- echo $ac_cv_use_notebook >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_statbmp >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_NOTEBOOK" = yes; then
+ if test "$wxUSE_STATBMP" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-radiobox"""... $ac_c" 1>&6
-echo "configure:4653: checking "for --enable-radiobox"" >&5
+ echo $ac_n "checking for --enable-statbox""... $ac_c" 1>&6
+echo "configure:5790: checking for --enable-statbox" >&5
no_cache=0
- # Check whether --enable-radiobox or --disable-radiobox was given.
-if test "${enable_radiobox+set}" = set; then
- enableval="$enable_radiobox"
+ # Check whether --enable-statbox or --disable-statbox was given.
+if test "${enable_statbox+set}" = set; then
+ enableval="$enable_statbox"
if test "$enableval" = yes; then
- ac_cv_use_radiobox='wxUSE_RADIOBOX=yes'
+ ac_cv_use_statbox='wxUSE_STATBOX=yes'
else
- ac_cv_use_radiobox='wxUSE_RADIOBOX=no'
+ ac_cv_use_statbox='wxUSE_STATBOX=no'
fi
else
- LINE=`grep "wxUSE_RADIOBOX" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STATBOX" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_radiobox='wxUSE_RADIOBOX='$DEFAULT_wxUSE_RADIOBOX
+ ac_cv_use_statbox='wxUSE_STATBOX='$DEFAULT_wxUSE_STATBOX
fi
- eval "$ac_cv_use_radiobox"
+ eval "$ac_cv_use_statbox"
if test "$no_cache" != 1; then
- echo $ac_cv_use_radiobox >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_statbox >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_RADIOBOX" = yes; then
+ if test "$wxUSE_STATBOX" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-radiobtn"""... $ac_c" 1>&6
-echo "configure:4692: checking "for --enable-radiobtn"" >&5
+ echo $ac_n "checking for --enable-statline""... $ac_c" 1>&6
+echo "configure:5829: checking for --enable-statline" >&5
no_cache=0
- # Check whether --enable-radiobtn or --disable-radiobtn was given.
-if test "${enable_radiobtn+set}" = set; then
- enableval="$enable_radiobtn"
+ # Check whether --enable-statline or --disable-statline was given.
+if test "${enable_statline+set}" = set; then
+ enableval="$enable_statline"
if test "$enableval" = yes; then
- ac_cv_use_radiobtn='wxUSE_RADIOBTN=yes'
+ ac_cv_use_statline='wxUSE_STATLINE=yes'
else
- ac_cv_use_radiobtn='wxUSE_RADIOBTN=no'
+ ac_cv_use_statline='wxUSE_STATLINE=no'
fi
else
- LINE=`grep "wxUSE_RADIOBTN" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STATLINE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_radiobtn='wxUSE_RADIOBTN='$DEFAULT_wxUSE_RADIOBTN
+ ac_cv_use_statline='wxUSE_STATLINE='$DEFAULT_wxUSE_STATLINE
fi
- eval "$ac_cv_use_radiobtn"
+ eval "$ac_cv_use_statline"
if test "$no_cache" != 1; then
- echo $ac_cv_use_radiobtn >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_statline >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_RADIOBTN" = yes; then
+ if test "$wxUSE_STATLINE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-sash"""... $ac_c" 1>&6
-echo "configure:4731: checking "for --enable-sash"" >&5
+ echo $ac_n "checking for --enable-stattext""... $ac_c" 1>&6
+echo "configure:5868: checking for --enable-stattext" >&5
no_cache=0
- # Check whether --enable-sash or --disable-sash was given.
-if test "${enable_sash+set}" = set; then
- enableval="$enable_sash"
+ # Check whether --enable-stattext or --disable-stattext was given.
+if test "${enable_stattext+set}" = set; then
+ enableval="$enable_stattext"
if test "$enableval" = yes; then
- ac_cv_use_sash='wxUSE_SASH=yes'
+ ac_cv_use_stattext='wxUSE_STATTEXT=yes'
else
- ac_cv_use_sash='wxUSE_SASH=no'
+ ac_cv_use_stattext='wxUSE_STATTEXT=no'
fi
else
- LINE=`grep "wxUSE_SASH" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STATTEXT" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_sash='wxUSE_SASH='$DEFAULT_wxUSE_SASH
+ ac_cv_use_stattext='wxUSE_STATTEXT='$DEFAULT_wxUSE_STATTEXT
fi
- eval "$ac_cv_use_sash"
+ eval "$ac_cv_use_stattext"
if test "$no_cache" != 1; then
- echo $ac_cv_use_sash >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_stattext >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_SASH" = yes; then
+ if test "$wxUSE_STATTEXT" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-scrollbar"""... $ac_c" 1>&6
-echo "configure:4770: checking "for --enable-scrollbar"" >&5
+ echo $ac_n "checking for --enable-statusbar""... $ac_c" 1>&6
+echo "configure:5907: checking for --enable-statusbar" >&5
no_cache=0
- # Check whether --enable-scrollbar or --disable-scrollbar was given.
-if test "${enable_scrollbar+set}" = set; then
- enableval="$enable_scrollbar"
+ # Check whether --enable-statusbar or --disable-statusbar was given.
+if test "${enable_statusbar+set}" = set; then
+ enableval="$enable_statusbar"
if test "$enableval" = yes; then
- ac_cv_use_scrollbar='wxUSE_SCROLLBAR=yes'
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=yes'
else
- ac_cv_use_scrollbar='wxUSE_SCROLLBAR=no'
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=no'
fi
else
- LINE=`grep "wxUSE_SCROLLBAR" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_STATUSBAR" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_scrollbar='wxUSE_SCROLLBAR='$DEFAULT_wxUSE_SCROLLBAR
+ ac_cv_use_statusbar='wxUSE_STATUSBAR='$DEFAULT_wxUSE_STATUSBAR
fi
- eval "$ac_cv_use_scrollbar"
+ eval "$ac_cv_use_statusbar"
if test "$no_cache" != 1; then
- echo $ac_cv_use_scrollbar >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_statusbar >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_SCROLLBAR" = yes; then
+ if test "$wxUSE_STATUSBAR" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-slider"""... $ac_c" 1>&6
-echo "configure:4809: checking "for --enable-slider"" >&5
+ echo $ac_n "checking for --enable-tabdialog""... $ac_c" 1>&6
+echo "configure:5946: checking for --enable-tabdialog" >&5
no_cache=0
- # Check whether --enable-slider or --disable-slider was given.
-if test "${enable_slider+set}" = set; then
- enableval="$enable_slider"
+ # Check whether --enable-tabdialog or --disable-tabdialog was given.
+if test "${enable_tabdialog+set}" = set; then
+ enableval="$enable_tabdialog"
if test "$enableval" = yes; then
- ac_cv_use_slider='wxUSE_SLIDER=yes'
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=yes'
else
- ac_cv_use_slider='wxUSE_SLIDER=no'
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=no'
fi
else
- LINE=`grep "wxUSE_SLIDER" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TABDIALOG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_slider='wxUSE_SLIDER='$DEFAULT_wxUSE_SLIDER
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG='$DEFAULT_wxUSE_TABDIALOG
fi
- eval "$ac_cv_use_slider"
+ eval "$ac_cv_use_tabdialog"
if test "$no_cache" != 1; then
- echo $ac_cv_use_slider >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_tabdialog >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_SLIDER" = yes; then
+ if test "$wxUSE_TABDIALOG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-spinbtn"""... $ac_c" 1>&6
-echo "configure:4848: checking "for --enable-spinbtn"" >&5
+ echo $ac_n "checking for --enable-textctrl""... $ac_c" 1>&6
+echo "configure:5985: checking for --enable-textctrl" >&5
no_cache=0
- # Check whether --enable-spinbtn or --disable-spinbtn was given.
-if test "${enable_spinbtn+set}" = set; then
- enableval="$enable_spinbtn"
+ # Check whether --enable-textctrl or --disable-textctrl was given.
+if test "${enable_textctrl+set}" = set; then
+ enableval="$enable_textctrl"
if test "$enableval" = yes; then
- ac_cv_use_spinbtn='wxUSE_SPINBTN=yes'
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL=yes'
else
- ac_cv_use_spinbtn='wxUSE_SPINBTN=no'
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL=no'
fi
else
- LINE=`grep "wxUSE_SPINBTN" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TEXTCTRL" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_spinbtn='wxUSE_SPINBTN='$DEFAULT_wxUSE_SPINBTN
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL='$DEFAULT_wxUSE_TEXTCTRL
fi
- eval "$ac_cv_use_spinbtn"
+ eval "$ac_cv_use_textctrl"
if test "$no_cache" != 1; then
- echo $ac_cv_use_spinbtn >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_textctrl >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_SPINBTN" = yes; then
+ if test "$wxUSE_TEXTCTRL" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-spinctrl"""... $ac_c" 1>&6
-echo "configure:4887: checking "for --enable-spinctrl"" >&5
+ echo $ac_n "checking for --enable-togglebtn""... $ac_c" 1>&6
+echo "configure:6024: checking for --enable-togglebtn" >&5
no_cache=0
- # Check whether --enable-spinctrl or --disable-spinctrl was given.
-if test "${enable_spinctrl+set}" = set; then
- enableval="$enable_spinctrl"
+ # Check whether --enable-togglebtn or --disable-togglebtn was given.
+if test "${enable_togglebtn+set}" = set; then
+ enableval="$enable_togglebtn"
if test "$enableval" = yes; then
- ac_cv_use_spinctrl='wxUSE_SPINCTRL=yes'
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=yes'
else
- ac_cv_use_spinctrl='wxUSE_SPINCTRL=no'
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=no'
fi
else
- LINE=`grep "wxUSE_SPINCTRL" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TOGGLEBTN" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_spinctrl='wxUSE_SPINCTRL='$DEFAULT_wxUSE_SPINCTRL
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN='$DEFAULT_wxUSE_TOGGLEBTN
fi
- eval "$ac_cv_use_spinctrl"
+ eval "$ac_cv_use_togglebtn"
if test "$no_cache" != 1; then
- echo $ac_cv_use_spinctrl >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_togglebtn >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_SPINCTRL" = yes; then
+ if test "$wxUSE_TOGGLEBTN" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-splitter"""... $ac_c" 1>&6
-echo "configure:4926: checking "for --enable-splitter"" >&5
+ echo $ac_n "checking for --enable-toolbar""... $ac_c" 1>&6
+echo "configure:6063: checking for --enable-toolbar" >&5
no_cache=0
- # Check whether --enable-splitter or --disable-splitter was given.
-if test "${enable_splitter+set}" = set; then
- enableval="$enable_splitter"
+ # Check whether --enable-toolbar or --disable-toolbar was given.
+if test "${enable_toolbar+set}" = set; then
+ enableval="$enable_toolbar"
if test "$enableval" = yes; then
- ac_cv_use_splitter='wxUSE_SPLITTER=yes'
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=yes'
else
- ac_cv_use_splitter='wxUSE_SPLITTER=no'
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=no'
fi
else
- LINE=`grep "wxUSE_SPLITTER" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TOOLBAR" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_splitter='wxUSE_SPLITTER='$DEFAULT_wxUSE_SPLITTER
+ ac_cv_use_toolbar='wxUSE_TOOLBAR='$DEFAULT_wxUSE_TOOLBAR
fi
- eval "$ac_cv_use_splitter"
+ eval "$ac_cv_use_toolbar"
if test "$no_cache" != 1; then
- echo $ac_cv_use_splitter >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_toolbar >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_SPLITTER" = yes; then
+ if test "$wxUSE_TOOLBAR" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-statbmp"""... $ac_c" 1>&6
-echo "configure:4965: checking "for --enable-statbmp"" >&5
+ echo $ac_n "checking for --enable-tbarnative""... $ac_c" 1>&6
+echo "configure:6102: checking for --enable-tbarnative" >&5
no_cache=0
- # Check whether --enable-statbmp or --disable-statbmp was given.
-if test "${enable_statbmp+set}" = set; then
- enableval="$enable_statbmp"
+ # Check whether --enable-tbarnative or --disable-tbarnative was given.
+if test "${enable_tbarnative+set}" = set; then
+ enableval="$enable_tbarnative"
if test "$enableval" = yes; then
- ac_cv_use_statbmp='wxUSE_STATBMP=yes'
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=yes'
else
- ac_cv_use_statbmp='wxUSE_STATBMP=no'
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=no'
fi
else
- LINE=`grep "wxUSE_STATBMP" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TOOLBAR_NATIVE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_statbmp='wxUSE_STATBMP='$DEFAULT_wxUSE_STATBMP
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE='$DEFAULT_wxUSE_TOOLBAR_NATIVE
fi
- eval "$ac_cv_use_statbmp"
+ eval "$ac_cv_use_tbarnative"
if test "$no_cache" != 1; then
- echo $ac_cv_use_statbmp >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_tbarnative >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_STATBMP" = yes; then
+ if test "$wxUSE_TOOLBAR_NATIVE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-statbox"""... $ac_c" 1>&6
-echo "configure:5004: checking "for --enable-statbox"" >&5
+ echo $ac_n "checking for --enable-tbarsmpl""... $ac_c" 1>&6
+echo "configure:6141: checking for --enable-tbarsmpl" >&5
no_cache=0
- # Check whether --enable-statbox or --disable-statbox was given.
-if test "${enable_statbox+set}" = set; then
- enableval="$enable_statbox"
+ # Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
+if test "${enable_tbarsmpl+set}" = set; then
+ enableval="$enable_tbarsmpl"
if test "$enableval" = yes; then
- ac_cv_use_statbox='wxUSE_STATBOX=yes'
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=yes'
else
- ac_cv_use_statbox='wxUSE_STATBOX=no'
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=no'
fi
else
- LINE=`grep "wxUSE_STATBOX" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TOOLBAR_SIMPLE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_statbox='wxUSE_STATBOX='$DEFAULT_wxUSE_STATBOX
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE='$DEFAULT_wxUSE_TOOLBAR_SIMPLE
fi
- eval "$ac_cv_use_statbox"
+ eval "$ac_cv_use_tbarsmpl"
if test "$no_cache" != 1; then
- echo $ac_cv_use_statbox >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_tbarsmpl >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_STATBOX" = yes; then
+ if test "$wxUSE_TOOLBAR_SIMPLE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-statline"""... $ac_c" 1>&6
-echo "configure:5043: checking "for --enable-statline"" >&5
+ echo $ac_n "checking for --enable-treectrl""... $ac_c" 1>&6
+echo "configure:6180: checking for --enable-treectrl" >&5
no_cache=0
- # Check whether --enable-statline or --disable-statline was given.
-if test "${enable_statline+set}" = set; then
- enableval="$enable_statline"
+ # Check whether --enable-treectrl or --disable-treectrl was given.
+if test "${enable_treectrl+set}" = set; then
+ enableval="$enable_treectrl"
if test "$enableval" = yes; then
- ac_cv_use_statline='wxUSE_STATLINE=yes'
+ ac_cv_use_treectrl='wxUSE_TREECTRL=yes'
else
- ac_cv_use_statline='wxUSE_STATLINE=no'
+ ac_cv_use_treectrl='wxUSE_TREECTRL=no'
fi
else
- LINE=`grep "wxUSE_STATLINE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_TREECTRL" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_statline='wxUSE_STATLINE='$DEFAULT_wxUSE_STATLINE
+ ac_cv_use_treectrl='wxUSE_TREECTRL='$DEFAULT_wxUSE_TREECTRL
fi
- eval "$ac_cv_use_statline"
+ eval "$ac_cv_use_treectrl"
if test "$no_cache" != 1; then
- echo $ac_cv_use_statline >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_treectrl >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_STATLINE" = yes; then
+ if test "$wxUSE_TREECTRL" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-statusbar"""... $ac_c" 1>&6
-echo "configure:5082: checking "for --enable-statusbar"" >&5
+
+
+ echo $ac_n "checking for --enable-commondlg""... $ac_c" 1>&6
+echo "configure:6221: checking for --enable-commondlg" >&5
no_cache=0
- # Check whether --enable-statusbar or --disable-statusbar was given.
-if test "${enable_statusbar+set}" = set; then
- enableval="$enable_statusbar"
+ # Check whether --enable-commondlg or --disable-commondlg was given.
+if test "${enable_commondlg+set}" = set; then
+ enableval="$enable_commondlg"
if test "$enableval" = yes; then
- ac_cv_use_statusbar='wxUSE_STATUSBAR=yes'
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=yes'
else
- ac_cv_use_statusbar='wxUSE_STATUSBAR=no'
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=no'
fi
else
- LINE=`grep "wxUSE_STATUSBAR" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_COMMONDLGS" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_statusbar='wxUSE_STATUSBAR='$DEFAULT_wxUSE_STATUSBAR
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS='$DEFAULT_wxUSE_COMMONDLGS
fi
- eval "$ac_cv_use_statusbar"
+ eval "$ac_cv_use_commondlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_statusbar >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_commondlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_STATUSBAR" = yes; then
+ if test "$wxUSE_COMMONDLGS" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-tabdialog"""... $ac_c" 1>&6
-echo "configure:5121: checking "for --enable-tabdialog"" >&5
+ echo $ac_n "checking for --enable-choicedlg""... $ac_c" 1>&6
+echo "configure:6260: checking for --enable-choicedlg" >&5
no_cache=0
- # Check whether --enable-tabdialog or --disable-tabdialog was given.
-if test "${enable_tabdialog+set}" = set; then
- enableval="$enable_tabdialog"
+ # Check whether --enable-choicedlg or --disable-choicedlg was given.
+if test "${enable_choicedlg+set}" = set; then
+ enableval="$enable_choicedlg"
if test "$enableval" = yes; then
- ac_cv_use_tabdialog='wxUSE_TABDIALOG=yes'
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG=yes'
else
- ac_cv_use_tabdialog='wxUSE_TABDIALOG=no'
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG=no'
fi
else
- LINE=`grep "wxUSE_TABDIALOG" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_CHOICEDLG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_tabdialog='wxUSE_TABDIALOG='$DEFAULT_wxUSE_TABDIALOG
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG='$DEFAULT_wxUSE_CHOICEDLG
fi
- eval "$ac_cv_use_tabdialog"
+ eval "$ac_cv_use_choicedlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_tabdialog >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_choicedlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_TABDIALOG" = yes; then
+ if test "$wxUSE_CHOICEDLG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-toolbar"""... $ac_c" 1>&6
-echo "configure:5160: checking "for --enable-toolbar"" >&5
+ echo $ac_n "checking for --enable-coldlg""... $ac_c" 1>&6
+echo "configure:6299: checking for --enable-coldlg" >&5
no_cache=0
- # Check whether --enable-toolbar or --disable-toolbar was given.
-if test "${enable_toolbar+set}" = set; then
- enableval="$enable_toolbar"
+ # Check whether --enable-coldlg or --disable-coldlg was given.
+if test "${enable_coldlg+set}" = set; then
+ enableval="$enable_coldlg"
if test "$enableval" = yes; then
- ac_cv_use_toolbar='wxUSE_TOOLBAR=yes'
+ ac_cv_use_coldlg='wxUSE_COLOURDLG=yes'
else
- ac_cv_use_toolbar='wxUSE_TOOLBAR=no'
+ ac_cv_use_coldlg='wxUSE_COLOURDLG=no'
fi
else
- LINE=`grep "wxUSE_TOOLBAR" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_COLOURDLG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_toolbar='wxUSE_TOOLBAR='$DEFAULT_wxUSE_TOOLBAR
+ ac_cv_use_coldlg='wxUSE_COLOURDLG='$DEFAULT_wxUSE_COLOURDLG
fi
- eval "$ac_cv_use_toolbar"
+ eval "$ac_cv_use_coldlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_toolbar >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_coldlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_TOOLBAR" = yes; then
+ if test "$wxUSE_COLOURDLG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-tbarnative"""... $ac_c" 1>&6
-echo "configure:5199: checking "for --enable-tbarnative"" >&5
+ echo $ac_n "checking for --enable-filedlg""... $ac_c" 1>&6
+echo "configure:6338: checking for --enable-filedlg" >&5
no_cache=0
- # Check whether --enable-tbarnative or --disable-tbarnative was given.
-if test "${enable_tbarnative+set}" = set; then
- enableval="$enable_tbarnative"
+ # Check whether --enable-filedlg or --disable-filedlg was given.
+if test "${enable_filedlg+set}" = set; then
+ enableval="$enable_filedlg"
if test "$enableval" = yes; then
- ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=yes'
+ ac_cv_use_filedlg='wxUSE_FILEDLG=yes'
else
- ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=no'
+ ac_cv_use_filedlg='wxUSE_FILEDLG=no'
fi
else
- LINE=`grep "wxUSE_TOOLBAR_NATIVE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FILEDLG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE='$DEFAULT_wxUSE_TOOLBAR_NATIVE
+ ac_cv_use_filedlg='wxUSE_FILEDLG='$DEFAULT_wxUSE_FILEDLG
fi
- eval "$ac_cv_use_tbarnative"
+ eval "$ac_cv_use_filedlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_tbarnative >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_filedlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_TOOLBAR_NATIVE" = yes; then
+ if test "$wxUSE_FILEDLG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-tbarsmpl"""... $ac_c" 1>&6
-echo "configure:5238: checking "for --enable-tbarsmpl"" >&5
+ echo $ac_n "checking for --enable-fontdlg""... $ac_c" 1>&6
+echo "configure:6377: checking for --enable-fontdlg" >&5
no_cache=0
- # Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
-if test "${enable_tbarsmpl+set}" = set; then
- enableval="$enable_tbarsmpl"
+ # Check whether --enable-fontdlg or --disable-fontdlg was given.
+if test "${enable_fontdlg+set}" = set; then
+ enableval="$enable_fontdlg"
if test "$enableval" = yes; then
- ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=yes'
+ ac_cv_use_fontdlg='wxUSE_FONTDLG=yes'
else
- ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=no'
+ ac_cv_use_fontdlg='wxUSE_FONTDLG=no'
fi
else
- LINE=`grep "wxUSE_TOOLBAR_SIMPLE" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_FONTDLG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE='$DEFAULT_wxUSE_TOOLBAR_SIMPLE
+ ac_cv_use_fontdlg='wxUSE_FONTDLG='$DEFAULT_wxUSE_FONTDLG
fi
- eval "$ac_cv_use_tbarsmpl"
+ eval "$ac_cv_use_fontdlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_tbarsmpl >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_fontdlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_TOOLBAR_SIMPLE" = yes; then
+ if test "$wxUSE_FONTDLG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-treectrl"""... $ac_c" 1>&6
-echo "configure:5277: checking "for --enable-treectrl"" >&5
+ echo $ac_n "checking for --enable-dirdlg""... $ac_c" 1>&6
+echo "configure:6416: checking for --enable-dirdlg" >&5
no_cache=0
- # Check whether --enable-treectrl or --disable-treectrl was given.
-if test "${enable_treectrl+set}" = set; then
- enableval="$enable_treectrl"
+ # Check whether --enable-dirdlg or --disable-dirdlg was given.
+if test "${enable_dirdlg+set}" = set; then
+ enableval="$enable_dirdlg"
if test "$enableval" = yes; then
- ac_cv_use_treectrl='wxUSE_TREECTRL=yes'
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=yes'
else
- ac_cv_use_treectrl='wxUSE_TREECTRL=no'
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=no'
fi
else
- LINE=`grep "wxUSE_TREECTRL" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_DIRDLG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_treectrl='wxUSE_TREECTRL='$DEFAULT_wxUSE_TREECTRL
+ ac_cv_use_dirdlg='wxUSE_DIRDLG='$DEFAULT_wxUSE_DIRDLG
fi
- eval "$ac_cv_use_treectrl"
+ eval "$ac_cv_use_dirdlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_treectrl >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_dirdlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_TREECTRL" = yes; then
+ if test "$wxUSE_DIRDLG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
-
- echo $ac_n "checking "for --enable-commondlg"""... $ac_c" 1>&6
-echo "configure:5318: checking "for --enable-commondlg"" >&5
+ echo $ac_n "checking for --enable-msgdlg""... $ac_c" 1>&6
+echo "configure:6455: checking for --enable-msgdlg" >&5
no_cache=0
- # Check whether --enable-commondlg or --disable-commondlg was given.
-if test "${enable_commondlg+set}" = set; then
- enableval="$enable_commondlg"
+ # Check whether --enable-msgdlg or --disable-msgdlg was given.
+if test "${enable_msgdlg+set}" = set; then
+ enableval="$enable_msgdlg"
if test "$enableval" = yes; then
- ac_cv_use_commondlg='wxUSE_COMMONDLGS=yes'
+ ac_cv_use_msgdlg='wxUSE_MSGDLG=yes'
else
- ac_cv_use_commondlg='wxUSE_COMMONDLGS=no'
+ ac_cv_use_msgdlg='wxUSE_MSGDLG=no'
fi
else
- LINE=`grep "wxUSE_COMMONDLGS" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_MSGDLG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_commondlg='wxUSE_COMMONDLGS='$DEFAULT_wxUSE_COMMONDLGS
+ ac_cv_use_msgdlg='wxUSE_MSGDLG='$DEFAULT_wxUSE_MSGDLG
fi
- eval "$ac_cv_use_commondlg"
+ eval "$ac_cv_use_msgdlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_commondlg >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_msgdlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_COMMONDLGS" = yes; then
+ if test "$wxUSE_MSGDLG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-dirdlg"""... $ac_c" 1>&6
-echo "configure:5357: checking "for --enable-dirdlg"" >&5
+ echo $ac_n "checking for --enable-numberdlg""... $ac_c" 1>&6
+echo "configure:6494: checking for --enable-numberdlg" >&5
no_cache=0
- # Check whether --enable-dirdlg or --disable-dirdlg was given.
-if test "${enable_dirdlg+set}" = set; then
- enableval="$enable_dirdlg"
+ # Check whether --enable-numberdlg or --disable-numberdlg was given.
+if test "${enable_numberdlg+set}" = set; then
+ enableval="$enable_numberdlg"
if test "$enableval" = yes; then
- ac_cv_use_dirdlg='wxUSE_DIRDLG=yes'
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG=yes'
else
- ac_cv_use_dirdlg='wxUSE_DIRDLG=no'
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG=no'
fi
else
- LINE=`grep "wxUSE_DIRDLG" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_NUMBERDLG" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_dirdlg='wxUSE_DIRDLG='$DEFAULT_wxUSE_DIRDLG
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG='$DEFAULT_wxUSE_NUMBERDLG
fi
- eval "$ac_cv_use_dirdlg"
+ eval "$ac_cv_use_numberdlg"
if test "$no_cache" != 1; then
- echo $ac_cv_use_dirdlg >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_numberdlg >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_DIRDLG" = yes; then
+ if test "$wxUSE_NUMBERDLG" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-textdlg"""... $ac_c" 1>&6
-echo "configure:5396: checking "for --enable-textdlg"" >&5
+ echo $ac_n "checking for --enable-textdlg""... $ac_c" 1>&6
+echo "configure:6533: checking for --enable-textdlg" >&5
no_cache=0
# Check whether --enable-textdlg or --disable-textdlg was given.
if test "${enable_textdlg+set}" = set; then
fi
- echo $ac_n "checking "for --enable-tipdlg"""... $ac_c" 1>&6
-echo "configure:5435: checking "for --enable-tipdlg"" >&5
+ echo $ac_n "checking for --enable-tipdlg""... $ac_c" 1>&6
+echo "configure:6572: checking for --enable-tipdlg" >&5
no_cache=0
# Check whether --enable-tipdlg or --disable-tipdlg was given.
if test "${enable_tipdlg+set}" = set; then
fi
- echo $ac_n "checking "for --enable-progressdlg"""... $ac_c" 1>&6
-echo "configure:5474: checking "for --enable-progressdlg"" >&5
+ echo $ac_n "checking for --enable-progressdlg""... $ac_c" 1>&6
+echo "configure:6611: checking for --enable-progressdlg" >&5
no_cache=0
# Check whether --enable-progressdlg or --disable-progressdlg was given.
if test "${enable_progressdlg+set}" = set; then
fi
- echo $ac_n "checking "for --enable-miniframe"""... $ac_c" 1>&6
-echo "configure:5513: checking "for --enable-miniframe"" >&5
+ echo $ac_n "checking for --enable-menus""... $ac_c" 1>&6
+echo "configure:6650: checking for --enable-menus" >&5
+ no_cache=0
+ # Check whether --enable-menus or --disable-menus was given.
+if test "${enable_menus+set}" = set; then
+ enableval="$enable_menus"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_menus='wxUSE_MENUS=yes'
+ else
+ ac_cv_use_menus='wxUSE_MENUS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MENUS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_menus='wxUSE_MENUS='$DEFAULT_wxUSE_MENUS
+
+fi
+
+
+ eval "$ac_cv_use_menus"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_menus >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MENUS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-miniframe""... $ac_c" 1>&6
+echo "configure:6689: checking for --enable-miniframe" >&5
no_cache=0
# Check whether --enable-miniframe or --disable-miniframe was given.
if test "${enable_miniframe+set}" = set; then
fi
- echo $ac_n "checking "for --enable-html"""... $ac_c" 1>&6
-echo "configure:5552: checking "for --enable-html"" >&5
+ echo $ac_n "checking for --enable-html""... $ac_c" 1>&6
+echo "configure:6728: checking for --enable-html" >&5
no_cache=0
# Check whether --enable-html or --disable-html was given.
if test "${enable_html+set}" = set; then
fi
- echo $ac_n "checking "for --enable-tooltips"""... $ac_c" 1>&6
-echo "configure:5591: checking "for --enable-tooltips"" >&5
+ echo $ac_n "checking for --enable-tooltips""... $ac_c" 1>&6
+echo "configure:6767: checking for --enable-tooltips" >&5
no_cache=0
# Check whether --enable-tooltips or --disable-tooltips was given.
if test "${enable_tooltips+set}" = set; then
fi
- echo $ac_n "checking "for --enable-splines"""... $ac_c" 1>&6
-echo "configure:5630: checking "for --enable-splines"" >&5
+ echo $ac_n "checking for --enable-splines""... $ac_c" 1>&6
+echo "configure:6806: checking for --enable-splines" >&5
no_cache=0
# Check whether --enable-splines or --disable-splines was given.
if test "${enable_splines+set}" = set; then
fi
- echo $ac_n "checking "for --enable-validators"""... $ac_c" 1>&6
-echo "configure:5669: checking "for --enable-validators"" >&5
+ echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6
+echo "configure:6845: checking for --enable-validators" >&5
no_cache=0
# Check whether --enable-validators or --disable-validators was given.
if test "${enable_validators+set}" = set; then
fi
- echo $ac_n "checking "for --enable-busyinfo"""... $ac_c" 1>&6
-echo "configure:5708: checking "for --enable-busyinfo"" >&5
+ echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6
+echo "configure:6884: checking for --enable-busyinfo" >&5
no_cache=0
# Check whether --enable-busyinfo or --disable-busyinfo was given.
if test "${enable_busyinfo+set}" = set; then
fi
- echo $ac_n "checking "for --enable-plot"""... $ac_c" 1>&6
-echo "configure:5747: checking "for --enable-plot"" >&5
+ echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6
+echo "configure:6923: checking for --enable-joystick" >&5
+ no_cache=0
+ # Check whether --enable-joystick or --disable-joystick was given.
+if test "${enable_joystick+set}" = set; then
+ enableval="$enable_joystick"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
+ else
+ ac_cv_use_joystick='wxUSE_JOYSTICK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
+
+fi
+
+
+ eval "$ac_cv_use_joystick"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_JOYSTICK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
+echo "configure:6962: checking for --enable-metafile" >&5
no_cache=0
- # Check whether --enable-plot or --disable-plot was given.
-if test "${enable_plot+set}" = set; then
- enableval="$enable_plot"
+ # Check whether --enable-metafile or --disable-metafile was given.
+if test "${enable_metafile+set}" = set; then
+ enableval="$enable_metafile"
if test "$enableval" = yes; then
- ac_cv_use_plot='wxUSE_PLOT=yes'
+ ac_cv_use_metafile='wxUSE_METAFILE=yes'
else
- ac_cv_use_plot='wxUSE_PLOT=no'
+ ac_cv_use_metafile='wxUSE_METAFILE=no'
fi
else
- LINE=`grep "wxUSE_PLOT" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_METAFILE" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_plot='wxUSE_PLOT='$DEFAULT_wxUSE_PLOT
+ ac_cv_use_metafile='wxUSE_METAFILE='$DEFAULT_wxUSE_METAFILE
fi
- eval "$ac_cv_use_plot"
+ eval "$ac_cv_use_metafile"
if test "$no_cache" != 1; then
- echo $ac_cv_use_plot >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_metafile >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_PLOT" = yes; then
+ if test "$wxUSE_METAFILE" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
- echo $ac_n "checking "for --enable-gif"""... $ac_c" 1>&6
-echo "configure:5788: checking "for --enable-gif"" >&5
+ echo $ac_n "checking for --enable-image""... $ac_c" 1>&6
+echo "configure:7003: checking for --enable-image" >&5
+ no_cache=0
+ # Check whether --enable-image or --disable-image was given.
+if test "${enable_image+set}" = set; then
+ enableval="$enable_image"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_image='wxUSE_IMAGE=yes'
+ else
+ ac_cv_use_image='wxUSE_IMAGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IMAGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_image='wxUSE_IMAGE='$DEFAULT_wxUSE_IMAGE
+
+fi
+
+
+ eval "$ac_cv_use_image"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_image >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IMAGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6
+echo "configure:7042: checking for --enable-gif" >&5
no_cache=0
# Check whether --enable-gif or --disable-gif was given.
if test "${enable_gif+set}" = set; then
fi
- echo $ac_n "checking "for --enable-pcx"""... $ac_c" 1>&6
-echo "configure:5827: checking "for --enable-pcx"" >&5
+ echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6
+echo "configure:7081: checking for --enable-pcx" >&5
no_cache=0
# Check whether --enable-pcx or --disable-pcx was given.
if test "${enable_pcx+set}" = set; then
enableval="$enable_pcx"
if test "$enableval" = yes; then
- ac_cv_use_pcx='wxUSE_PCX=yes'
+ ac_cv_use_pcx='wxUSE_PCX=yes'
+ else
+ ac_cv_use_pcx='wxUSE_PCX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PCX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pcx='wxUSE_PCX='$DEFAULT_wxUSE_PCX
+
+fi
+
+
+ eval "$ac_cv_use_pcx"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pcx >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PCX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
+echo "configure:7120: checking for --enable-pnm" >&5
+ no_cache=0
+ # Check whether --enable-pnm or --disable-pnm was given.
+if test "${enable_pnm+set}" = set; then
+ enableval="$enable_pnm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pnm='wxUSE_PNM=yes'
else
- ac_cv_use_pcx='wxUSE_PCX=no'
+ ac_cv_use_pnm='wxUSE_PNM=no'
fi
else
- LINE=`grep "wxUSE_PCX" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_PNM" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_pcx='wxUSE_PCX='$DEFAULT_wxUSE_PCX
+ ac_cv_use_pnm='wxUSE_PNM='$DEFAULT_wxUSE_PNM
fi
- eval "$ac_cv_use_pcx"
+ eval "$ac_cv_use_pnm"
if test "$no_cache" != 1; then
- echo $ac_cv_use_pcx >> ${wx_arg_cache_file}.tmp
+ echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_PCX" = yes; then
+ if test "$wxUSE_PNM" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- echo $ac_n "checking "for --enable-pnm"""... $ac_c" 1>&6
-echo "configure:5866: checking "for --enable-pnm"" >&5
+ echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
+echo "configure:7159: checking for --enable-pnm" >&5
no_cache=0
# Check whether --enable-pnm or --disable-pnm was given.
if test "${enable_pnm+set}" = set; then
enableval="$enable_pnm"
if test "$enableval" = yes; then
- ac_cv_use_pnm='wxUSE_PNM=yes'
+ ac_cv_use_pnm='wxUSE_XPM=yes'
else
- ac_cv_use_pnm='wxUSE_PNM=no'
+ ac_cv_use_pnm='wxUSE_XPM=no'
fi
else
- LINE=`grep "wxUSE_PNM" ${wx_arg_cache_file}`
+ LINE=`grep "wxUSE_XPM" ${wx_arg_cache_file}`
if test "x$LINE" != x ; then
eval "DEFAULT_$LINE"
else
no_cache=1
fi
- ac_cv_use_pnm='wxUSE_PNM='$DEFAULT_wxUSE_PNM
+ ac_cv_use_pnm='wxUSE_XPM='$DEFAULT_wxUSE_XPM
fi
echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
fi
- if test "$wxUSE_PNM" = yes; then
+ if test "$wxUSE_XPM" = yes; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for toolkit""... $ac_c" 1>&6
-echo "configure:5913: checking for toolkit" >&5
+echo "configure:7206: checking for toolkit" >&5
if test "$wxUSE_GUI" = "yes"; then
done
fi
-NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_WINE:-0} + ${wxUSE_MINGW:-0} + ${wxUSE_CYGWIN:-0}`
+NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} + ${wxUSE_WINE:-0} + ${wxUSE_MINGW:-0} + ${wxUSE_CYGWIN:-0} + ${wxUSE_MGL:-0}`
case "${host}" in
*-pc-os2_emx )
echo "$var=$value" >> ${wx_arg_cache_file}
fi
if test "$value" = 1; then
- echo "$ac_t""`echo $toolkit | tr A-Z a-z`" 1>&6
+ echo "$ac_t""`echo $toolkit | tr [A-Z] [a-z]`" 1>&6
fi
fi
done
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6046: checking for $ac_word" >&5
+echo "configure:7339: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6076: checking for $ac_word" >&5
+echo "configure:7369: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6127: checking for $ac_word" >&5
+echo "configure:7420: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:6159: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:7452: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 6170 "configure"
+#line 7463 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:6175: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:6201: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:7494: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:6206: checking whether we are using GNU C" >&5
+echo "configure:7499: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:6215: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:7508: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:6234: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:7527: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:6269: checking how to run the C preprocessor" >&5
+echo "configure:7562: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 6284 "configure"
+#line 7577 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6290: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7583: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 6301 "configure"
+#line 7594 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7600: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 6318 "configure"
+#line 7611 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6324: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7617: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:6351: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:7644: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
-#line 6357 "configure"
+#line 7650 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
-#line 6375 "configure"
+#line 7668 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6411: checking for $ac_word" >&5
+echo "configure:7704: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:6443: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:7736: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 6454 "configure"
+#line 7747 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
-if { (eval echo configure:6459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:6485: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:7778: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:6490: checking whether we are using GNU C++" >&5
+echo "configure:7783: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:6499: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:7792: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:6518: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:7811: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:6551: checking how to run the C++ preprocessor" >&5
+echo "configure:7844: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 6564 "configure"
+#line 7857 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6569: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7862: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6607: checking for $ac_word" >&5
+echo "configure:7900: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6638: checking for $ac_word" >&5
+echo "configure:7931: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:6678: checking for a BSD compatible install" >&5
+echo "configure:7971: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6734: checking for $ac_word" >&5
+echo "configure:8027: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-echo $ac_n "checking "make for VPATH support"""... $ac_c" 1>&6
-echo "configure:6763: checking "make for VPATH support"" >&5
+echo $ac_n "checking make for VPATH support""... $ac_c" 1>&6
+echo "configure:8056: checking make for VPATH support" >&5
cat - << EOF > confMake
check : file
cp \$? \$@
mkdir sub
fi
echo dummy > sub/file
-${MAKE-make} -f confMake VPATH=sub 2> config.log > /dev/null
+${MAKE-make} -f confMake VPATH=sub 2>&5 > /dev/null
RESULT=$?
rm -f sub/file check final_file confMake
rmdir sub
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
- { echo "configure: error: You need a make-utility that is able to use the variable
+ { echo "configure: error:
+You need a make-utility that is able to use the variable
VPATH correctly.
-If your version of make does not support VPATH correctly" 1>&2; exit 1; }
+If your version of make does not support VPATH correctly,
+please install GNU-make (possibly as gmake), and start
+configure with the following command:
+export MAKE=gmake; ./configure for sh-type shells
+setenv MAKE gmake; ./configure for csh-type shells
+Also please do remember to use gmake in this case every time
+you are trying to compile.
+" 1>&2; exit 1; }
fi
for ac_prog in 'bison -y' byacc
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6792: checking for $ac_word" >&5
+echo "configure:8093: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6826: checking for $ac_word" >&5
+echo "configure:8127: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:6860: checking for yywrap in -l$ac_lib" >&5
+echo "configure:8161: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6868 "configure"
+#line 8169 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:6879: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:6903: checking whether ln -s works" >&5
+echo "configure:8204: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
AFMINSTALL=
if test "$wxUSE_GUI" = "yes"; then
+ USE_GUI=1
-USE_GUI=1
-
-TOOLKIT=
-TOOLKIT_INCLUDE=
+ TOOLKIT=
+ TOOLKIT_INCLUDE=
-GUIOBJS=
-COMMONOBJS=
-GENERICOBJS=
+ GUI_TK_LIBRARY=
+ GUI_TK_LINK=
-GUI_TK_LIBRARY=
-GUI_TK_LINK=
+ WXGTK12=
+ WXGTK127=
+ WXGTK20=
-WXGTK12=
-WXGTK13=
+ WXWINE=
-WXWINE=
-
-if test "$wxUSE_CYGWIN" = 1 || test "$wxUSE_MINGW" = 1 ; then
- if test "$cross_compiling" = "yes" ; then
- echo "configure: warning: skipping windows.h check for cross-compilation" 1>&2
- else
- echo $ac_n "checking for Windows headers""... $ac_c" 1>&6
-echo "configure:7070: checking for Windows headers" >&5
-
+ if test "$wxUSE_CYGWIN" = 1 || test "$wxUSE_MINGW" = 1 ; then
+ if test "$cross_compiling" = "yes" ; then
+ echo "configure: warning: skipping windows.h check for cross-compilation" 1>&2
+ else
+ echo $ac_n "checking for Windows headers""... $ac_c" 1>&6
+echo "configure:8367: checking for Windows headers" >&5
+
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
do
fi
done
- if test "$ac_find_includes" != "" ; then
- echo "$ac_t""found $ac_find_includes" 1>&6
- TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
- else
- echo "$ac_t""no" 1>&6
- { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
+ if test "$ac_find_includes" != "" ; then
+ echo "$ac_t""found $ac_find_includes" 1>&6
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
+ else
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
+ fi
+ fi
+
+ INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS msw"
+ LIBS="$LIBS -lkernel32 -luser32 -lgdi32 -lcomdlg32 -lwinspool -lwinmm -lshell32 -lcomctl32 -lctl3d32 -lcrtdll -ladvapi32 -lwsock32"
+
+ if test "$wxUSE_ODBC" = "yes" ; then
+ LIBS="$LIBS -lodbc32 -lole32 -loleaut32"
fi
+
+ if test "$wxUSE_MINGW" = 1; then
+ LDFLAGS="$LDFLAGS -mwindows"
+ fi
+
+ TOOLKIT=MSW
+ GUIDIST=MSW_DIST
+
+ RCINCSWITCH="--include-dir"
+ RCDEFSWITCH="--define"
+ RCPREPROCESSOR="--preprocessor \"\$(CC) -c -E -xc-header -DRC_INVOKED\""
+ RCINPUTSWITCH="-i"
+ RCOUTPUTSWITCH="-o"
+ RESFLAGS="$RCPREPROCESSOR $RCINCSWITCH \$(top_srcdir)/include $RCINCSWITCH \$(top_srcdir)/\$(program_dir) $RCDEFSWITCH __WIN32__ $RCDEFSWITCH __WIN95__ $RCDEFSWITCH __GNUWIN32__"
+
+ RESPROGRAM="\$(RES_PROGRAM)"
fi
- INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS msw"
- LIBS="$LIBS -lkernel32 -luser32 -lgdi32 -lcomdlg32 -lwinspool -lwinmm -lshell32 -lcomctl32 -lctl3d32 -lcrtdll -ladvapi32 -lwsock32"
+ if test "$wxUSE_GTK" = 1; then
+ # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
+if test "${with_gtk_prefix+set}" = set; then
+ withval="$with_gtk_prefix"
+ gtk_config_prefix="$withval"
+else
+ gtk_config_prefix=""
+fi
+
+# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
+if test "${with_gtk_exec_prefix+set}" = set; then
+ withval="$with_gtk_exec_prefix"
+ gtk_config_exec_prefix="$withval"
+else
+ gtk_config_exec_prefix=""
+fi
- if test "$wxUSE_ODBC" = "yes" ; then
- LIBS="$LIBS -lodbc32 -lole32 -loleaut32"
- fi
-
- if test "$wxUSE_MINGW" = 1; then
- LDFLAGS="$LDFLAGS -mwindows"
+# Check whether --enable-gtktest or --disable-gtktest was given.
+if test "${enable_gtktest+set}" = set; then
+ enableval="$enable_gtktest"
+ :
+else
+ enable_gtktest=yes
+fi
+
+
+ for module in . gthread
+ do
+ case "$module" in
+ gthread)
+ gtk_config_args="$gtk_config_args gthread"
+ ;;
+ esac
+ done
+
+ if test x$gtk_config_exec_prefix != x ; then
+ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+ if test x${GTK_CONFIG_2_0+set} != xset ; then
+ GTK_CONFIG_2_0=$gtk_config_exec_prefix/bin/gtk-config-2.0
+ fi
+ fi
+ if test x$gtk_config_prefix != x ; then
+ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+ if test x${GTK_CONFIG_2_0+set} != xset ; then
+ GTK_CONFIG_2_0=$gtk_config_prefix/bin/gtk-config-2.0
+ fi
+ fi
+
+ # Extract the first word of "gtk-config-2.0", so it can be a program name with args.
+set dummy gtk-config-2.0; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8462: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG_2_0'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GTK_CONFIG_2_0" in
+ /*)
+ ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GTK_CONFIG_2_0="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GTK_CONFIG_2_0" && ac_cv_path_GTK_CONFIG_2_0="no"
+ ;;
+esac
+fi
+GTK_CONFIG_2_0="$ac_cv_path_GTK_CONFIG_2_0"
+if test -n "$GTK_CONFIG_2_0"; then
+ echo "$ac_t""$GTK_CONFIG_2_0" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ min_gtk_version=1.3.1
+ echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
+echo "configure:8497: checking for GTK - version >= $min_gtk_version" >&5
+ no_gtk=""
+ if test "$GTK_CONFIG_2_0" = "no" ; then
+ no_gtk=yes
+ else
+ GTK_CFLAGS=`$GTK_CONFIG_2_0 $gtk_config_args --cflags`
+ GTK_LIBS=`$GTK_CONFIG_2_0 $gtk_config_args --libs`
+ gtk_config_major_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ gtk_config_minor_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ gtk_config_micro_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_gtktest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$GTK_LIBS $LIBS"
+ rm -f conf.gtktest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+ cat > conftest.$ac_ext <<EOF
+#line 8520 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.gtktest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_gtk_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ if ((gtk_major_version != $gtk_config_major_version) ||
+ (gtk_minor_version != $gtk_config_minor_version) ||
+ (gtk_micro_version != $gtk_config_micro_version))
+ {
+ printf("\n*** 'gtk-config-2.0 --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf ("*** was found! If gtk-config-2.0 was correct, then it is best\n");
+ printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If gtk-config-2.0 was wrong, set the environment variable GTK_CONFIG_2_0\n");
+ printf("*** to point to the correct copy of gtk-config-2.0, and remove the file config.cache\n");
+ printf("*** before re-running configure\n");
+ }
+#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
+ else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_micro_version != GTK_MICRO_VERSION))
+ {
+ printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ }
+#endif /* defined (GTK_MAJOR_VERSION) ... */
+ else
+ {
+ if ((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the gtk-config-2.0 shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GTK+, but you can also set the GTK_CONFIG_2_0 environment to point to the\n");
+ printf("*** correct copy of gtk-config-2.0. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+
+EOF
+if { (eval echo configure:8598: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ no_gtk=yes
+fi
+rm -fr conftest*
+fi
+
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_gtk" = x ; then
+ echo "$ac_t""yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" 1>&6
+ WXGTK20=1
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$GTK_CONFIG_2_0" = "no" ; then
+ echo "*** The gtk-config-2.0 script installed by GTK could not be found"
+ echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the GTK_CONFIG_2_0 environment variable to the"
+ echo "*** full path to gtk-config-2.0."
+ else
+ if test -f conf.gtktest ; then
+ :
+ else
+ echo "*** Could not run GTK test program, checking why..."
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 8632 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+
+int main() {
+ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
+; return 0; }
+EOF
+if { (eval echo configure:8642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GTK or finding the wrong"
+ echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+ echo "***"
+ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+ echo "*** came with the system with the command"
+ echo "***"
+ echo "*** rpm --erase --nodeps gtk gtk-devel"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GTK was incorrectly installed"
+ echo "*** or that you have moved GTK since it was installed. In the latter case, you"
+ echo "*** may want to edit the gtk-config-2.0 script: $GTK_CONFIG_2_0"
+fi
+rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+
+
+ if test x$gtk_config_exec_prefix != x ; then
+ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+ fi
+ fi
+ if test x$gtk_config_prefix != x ; then
+ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+ fi
+ fi
+
+ # Extract the first word of "gtk-config", so it can be a program name with args.
+set dummy gtk-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8692: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GTK_CONFIG" in
+ /*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
+ break
fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
+ ;;
+esac
+fi
+GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
+if test -n "$GTK_CONFIG"; then
+ echo "$ac_t""$GTK_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ min_gtk_version=1.2.7
+ echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
+echo "configure:8727: checking for GTK - version >= $min_gtk_version" >&5
+ no_gtk=""
+ if test "$GTK_CONFIG" != "no" ; then
+ GTK_CFLAGS=`$GTK_CONFIG --cflags`
+ GTK_LIBS=`$GTK_CONFIG --libs gthread`
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+ cat > conftest.$ac_ext <<EOF
+#line 8740 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <gtk/gtkfeatures.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
- TOOLKIT=MSW
+ if (sscanf("$min_gtk_version", "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
- GUIOBJS="\$(MSW_GUIOBJS)"
- GUIHEADERS="\$(MSW_HEADERS)"
- COMMONOBJS="\$(MSW_COMMONOBJS)"
- GENERICOBJS="\$(MSW_GENERICOBJS)"
- UNIXOBJS=
- GUIDIST=MSW_DIST
+ if ((GTK_MAJOR_VERSION != gtk_major_version) ||
+ (GTK_MINOR_VERSION != gtk_minor_version) ||
+ (GTK_MICRO_VERSION != gtk_micro_version)) {
+ printf("Headers vs. library version mismatch!\n");
+ exit(1);
+ }
- RCINCSWITCH="--include-dir"
- RCDEFSWITCH="--define"
- RCPREPROCESSOR="--preprocessor \"\$(CC) -c -E -xc-header -DRC_INVOKED\""
- RCINPUTSWITCH="-i"
- RCOUTPUTSWITCH="-o"
- RESFLAGS="$RCPREPROCESSOR $RCINCSWITCH \$(top_srcdir)/include $RCINCSWITCH \$(top_srcdir)/\$(program_dir) $RCDEFSWITCH __WIN32__ $RCDEFSWITCH __WIN95__ $RCDEFSWITCH __GNUWIN32__"
+ if (gtk_minor_version == 1) return FALSE;
- RESPROGRAM="\$(RES_PROGRAM)"
+ return !((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)));
+}
+EOF
+if { (eval echo configure:8773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ no_gtk=yes
+fi
+rm -fr conftest*
fi
-if test "$wxUSE_GTK" = 1; then
-
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ else
+ no_gtk=yes
+ fi
+ if test "x$no_gtk" = x ; then
+ echo "$ac_t""yes" 1>&6
+ WXGTK127=1
+ else
+ echo "$ac_t""no" 1>&6
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+ :
+ fi
+
+
+
+
if test x$gtk_config_exec_prefix != x ; then
gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
if test x${GTK_CONFIG+set} != xset ; then
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7139: checking for $ac_word" >&5
+echo "configure:8819: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.3
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:7174: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:8854: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" != "no" ; then
GTK_CFLAGS=`$GTK_CONFIG --cflags`
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 7187 "configure"
+#line 8867 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:7220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
-
- if test "$WXGTK12" != 1; then
- { echo "configure: error:
- Please check that gtk-config is in path, the directory
- where GTK+ libraries are installed (returned by
- 'gtk-config --libs' command) is in LD_LIBRARY_PATH or
- equivalent variable and GTK+ is version 1.2.3 or above.
- " 1>&2; exit 1; }
- fi
-
-
- TOOLKIT_INCLUDE="$GTK_CFLAGS"
+
+ fi
+
+
+ rm -f conf.gtktest
- GUI_TK_LIBRARY="$GTK_LIBS"
+ if test "$WXGTK12" != 1 -a "$WXGTK20" != 1; then
+ { echo "configure: error:
+ Please check that gtk-config is in path, the directory
+ where GTK+ libraries are installed (returned by
+ 'gtk-config --libs' command) is in LD_LIBRARY_PATH or
+ equivalent variable and GTK+ is version 1.2.3 or above.
+ " 1>&2; exit 1; }
+ fi
- TOOLKIT=GTK
+ TOOLKIT_INCLUDE="$GTK_CFLAGS"
- AFMINSTALL=afminstall
+
+ GUI_TK_LIBRARY="$GTK_LIBS"
- GUIOBJS="\$(GTK_GUIOBJS)"
- GUIHEADERS="\$(GTK_HEADERS)"
- COMMONOBJS="\$(GTK_COMMONOBJS)"
- GENERICOBJS="\$(GTK_GENERICOBJS)"
- GUIDEPS="\$(GTK_GUIDEPS)"
- COMMONDEPS="\$(GTK_COMMONDEPS)"
- GENERICDEPS="\$(GTK_GENERICDEPS)"
- UNIXOBJS="\$(UNIX_OBJS)"
- UNIXDEPS="\$(UNIX_DEPS)"
- GUIDIST=GTK_DIST
+
+ AFMINSTALL=afminstall
+ TOOLKIT=GTK
+ GUIDIST=GTK_DIST
- echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
-echo "configure:7281: checking for gdk_im_open in -lgdk" >&5
+ echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
+echo "configure:8956: checking for gdk_im_open in -lgdk" >&5
ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgdk $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7289 "configure"
+#line 8964 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gdk_im_open()
; return 0; }
EOF
-if { (eval echo configure:7300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
-fi
+ fi
-if test "$wxUSE_WINE" = 1; then
- echo $ac_n "checking for WINE includes""... $ac_c" 1>&6
-echo "configure:7327: checking for WINE includes" >&5
-
+ if test "$wxUSE_MGL" = 1; then
+
+ echo $ac_n "checking for SciTech MGL library""... $ac_c" 1>&6
+echo "configure:9003: checking for SciTech MGL library" >&5
+ if test "x$MGL_ROOT" = x ; then
+ echo "$ac_t""not found" 1>&6
+ { echo "configure: error: Cannot find MGL library. Make sure MGL_ROOT is set." 1>&2; exit 1; }
+ else
+ echo "$ac_t""$MGL_ROOT" 1>&6
+ fi
+
+ MGL_OS=linux/gcc/glibc
+ MGL_LIB_TYPE=""
+
+ if test "$wxUSE_DEBUG_FLAG" = yes ; then
+ if test -f $MGL_ROOT/lib/debug/$MGL_OS/libmgl.a ; then
+ MGL_LIB_TYPE=debug
+ fi
+ fi
+ if test "x$MGL_LIB_TYPE" = x ; then
+ if test -f $MGL_ROOT/lib/release/$MGL_OS/libmgl.a ; then
+ MGL_LIB_TYPE=release
+ else
+ { echo "configure: error: Cannot find MGL libraries, make sure they are compiled." 1>&2; exit 1; }
+ fi
+ fi
+
+ TOOLKIT_INCLUDE="-I$MGL_ROOT/include"
+ GUI_TK_LIBRARY="-L$MGL_ROOT/lib/$MGL_LIB_TYPE/$MGL_OS -lmgl -lmglcpp -lpm"
+
+ AFMINSTALL=afminstall
+ TOOLKIT=MGL
+ GUIDIST=MGL_DIST
+ fi
+
+ if test "$wxUSE_WINE" = 1; then
+ echo $ac_n "checking for WINE includes""... $ac_c" 1>&6
+echo "configure:9037: checking for WINE includes" >&5
+
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
do
fi
done
- if test "$ac_find_includes" != "" ; then
- echo "$ac_t""found $ac_find_includes" 1>&6
- TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
- else
- echo "$ac_t""no" 1>&6
- { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
- fi
+ if test "$ac_find_includes" != "" ; then
+ echo "$ac_t""found $ac_find_includes" 1>&6
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
+ else
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
+ fi
- XPM_LINK=""
- echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:7348: checking for Xpm library" >&5
-
+ XPM_LINK=""
+ echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
+echo "configure:9058: checking for Xpm library" >&5
+
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
do
done
done
- if test "$ac_find_libraries" != "" ; then
- GUI_TK_LIBRARY="-L$ac_find_libraries"
- XPM_LINK="-lXpm"
- cat >> confdefs.h <<\EOF
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="-L$ac_find_libraries"
+ XPM_LINK="-lXpm"
+ cat >> confdefs.h <<\EOF
#define wxHAVE_LIB_XPM 1
EOF
- echo "$ac_t""found at $ac_find_libraries" 1>&6
- else
- echo "$ac_t""no" 1>&6
- echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
- fi
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
+ fi
- MESA_LINK=""
- echo $ac_n "checking for Mesa library""... $ac_c" 1>&6
-echo "configure:7376: checking for Mesa library" >&5
-
+ MESA_LINK=""
+ echo $ac_n "checking for Mesa library""... $ac_c" 1>&6
+echo "configure:9086: checking for Mesa library" >&5
+
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
do
done
done
- if test "$ac_find_libraries" != "" ; then
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries"
- MESA_LINK="-lMesaGL"
- echo "$ac_t""found at $ac_find_libraries" 1>&6
- else
- { echo "configure: error: no" 1>&2; exit 1; }
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries"
+ MESA_LINK="-lMesaGL"
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
+ else
+ { echo "configure: error: no" 1>&2; exit 1; }
+ fi
+
+ GUI_TK_LINK="-lwine $MESA_LINK $XPM_LINK -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
+ WXWINE=1
+ TOOLKIT=MSW
+ GUIDIST=MSW_DIST
fi
- GUI_TK_LINK="-lwine $MESA_LINK $XPM_LINK -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses -lm"
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
- WXWINE=1
- TOOLKIT=MSW
-
- GUIHEADERS="\$(MSW_HEADERS)"
- GUIOBJS="\$(MSW_GUIOBJS)"
- COMMONOBJS="\$(MSW_COMMONOBJS)"
- GENERICOBJS="\$(MSW_GENERICOBJS)"
- GUIDEPS="\$(MSW_GUIDEPS)"
- COMMONDEPS="\$(MSW_COMMONDEPS)"
- GENERICDEPS="\$(MSW_GENERICDEPS)"
- UNIXOBJS="\$(UNIX_OBJS)"
- UNIXDEPS="\$(UNIX_DEPS)"
- GUIDIST=MSW_DIST
-fi
-
-if test "$wxUSE_MOTIF" = 1; then
- # If we find X, set shell vars x_includes and x_libraries to the
+
+ # If we find X, set shell vars x_includes and x_libraries to the
# paths, otherwise set no_x=yes.
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:7420: checking for X" >&5
+echo "configure:9120: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 7482 "configure"
+#line 9182 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7487: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9187: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7556 "configure"
+#line 9256 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:7563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:7669: checking whether -R must be followed by a space" >&5
+echo "configure:9369: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 7672 "configure"
+#line 9372 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:7679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 7695 "configure"
+#line 9395 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:7702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9402: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:7734: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:9434: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7742 "configure"
+#line 9442 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:7753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:7775: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:9475: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7783 "configure"
+#line 9483 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:7794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:7823: checking for gethostbyname" >&5
+echo "configure:9523: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7828 "configure"
+#line 9528 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:7851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:7872: checking for gethostbyname in -lnsl" >&5
+echo "configure:9572: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7880 "configure"
+#line 9580 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:7891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:7921: checking for connect" >&5
+echo "configure:9621: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7926 "configure"
+#line 9626 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:7949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:7970: checking for connect in -lsocket" >&5
+echo "configure:9670: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7978 "configure"
+#line 9678 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:7989: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:8013: checking for remove" >&5
+echo "configure:9713: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8018 "configure"
+#line 9718 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:8041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:8062: checking for remove in -lposix" >&5
+echo "configure:9762: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8070 "configure"
+#line 9770 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:8081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:8105: checking for shmat" >&5
+echo "configure:9805: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8110 "configure"
+#line 9810 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:8133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:8154: checking for shmat in -lipc" >&5
+echo "configure:9854: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8162 "configure"
+#line 9862 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:8173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:8206: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:9906: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8214 "configure"
+#line 9914 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:8225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+ LDFLAGS="$LDFLAGS $X_LIBS"
- if test "$no_x" = "yes"; then
- { echo "configure: error: X11 not found" 1>&2; exit 1; }
- fi
+ if test "$wxUSE_MOTIF" = 1; then
+ if test "$no_x" = "yes"; then
+ { echo "configure: error: X11 not found" 1>&2; exit 1; }
+ fi
- GUI_TK_LIBRARY="$X_LIBS"
- TOOLKIT_INCLUDE="$X_CFLAGS"
+ GUI_TK_LIBRARY="$X_LIBS"
+ TOOLKIT_INCLUDE="$X_CFLAGS"
- AFMINSTALL=afminstall
+ AFMINSTALL=afminstall
-
- COMPILED_X_PROGRAM=0
+
+ COMPILED_X_PROGRAM=0
- echo $ac_n "checking for Motif/Lesstif headers""... $ac_c" 1>&6
-echo "configure:8263: checking for Motif/Lesstif headers" >&5
-
+ echo $ac_n "checking for Motif/Lesstif headers""... $ac_c" 1>&6
+echo "configure:9966: checking for Motif/Lesstif headers" >&5
+
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
do
fi
done
- if test "$ac_find_includes" != "" ; then
- echo "$ac_t""found $ac_find_includes" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
-#line 8278 "configure"
+ if test "$ac_find_includes" != "" ; then
+ echo "$ac_t""found $ac_find_includes" 1>&6
+ else
+ cat > conftest.$ac_ext <<EOF
+#line 9981 "configure"
#include "confdefs.h"
- #include <Xm/Xm.h>
-
+ #include <Xm/Xm.h>
+
int main() {
- int version;
+ int version;
- version = xmUseVersion;
-
+ version = xmUseVersion;
+
; return 0; }
EOF
-if { (eval echo configure:8291: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9994: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- echo "$ac_t""found in default search path" 1>&6
- COMPILED_X_PROGRAM=1
-
+ echo "$ac_t""found in default search path" 1>&6
+ COMPILED_X_PROGRAM=1
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- echo "$ac_t""no" 1>&6
- { echo "configure: error: please set CFLAGS to contain the location of Xm/Xm.h" 1>&2; exit 1; }
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: please set CFLAGS to contain the location of Xm/Xm.h" 1>&2; exit 1; }
+
-
fi
rm -f conftest*
- fi
+ fi
- if test "$COMPILED_X_PROGRAM" = 0; then
- echo $ac_n "checking for Motif/Lesstif library""... $ac_c" 1>&6
-echo "configure:8312: checking for Motif/Lesstif library" >&5
-
+ if test "$COMPILED_X_PROGRAM" = 0; then
+ echo $ac_n "checking for Motif/Lesstif library""... $ac_c" 1>&6
+echo "configure:10015: checking for Motif/Lesstif library" >&5
+
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
do
done
done
- if test "$ac_find_libraries" != "" ; then
-
+ if test "$ac_find_libraries" != "" ; then
+
ac_path_to_include=$ac_find_includes
echo "$TOOLKIT_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null
result=$?
ac_path_to_include="-I$ac_find_includes"
fi
-
+
echo "$GUI_TK_LIBRARY" | grep "\-L$ac_find_libraries" > /dev/null
result=$?
if test $result = 0; then
fi
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
- TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE $ac_path_to_include"
- echo "$ac_t""found at $ac_find_libraries" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
-#line 8351 "configure"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE $ac_path_to_include"
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
+ else
+ cat > conftest.$ac_ext <<EOF
+#line 10054 "configure"
#include "confdefs.h"
- #include <Xm/Xm.h>
-
+ #include <Xm/Xm.h>
+
int main() {
- int version;
+ int version;
- version = xmUseVersion;
-
+ version = xmUseVersion;
+
; return 0; }
EOF
-if { (eval echo configure:8364: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10067: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- echo "$ac_t""found in default search path" 1>&6
- COMPILED_X_PROGRAM=1
-
+ echo "$ac_t""found in default search path" 1>&6
+ COMPILED_X_PROGRAM=1
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- echo "$ac_t""no" 1>&6
- { echo "configure: error: please set LDFLAGS to contain the location of libXm" 1>&2; exit 1; }
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: please set LDFLAGS to contain the location of libXm" 1>&2; exit 1; }
+
-
fi
rm -f conftest*
+ fi
fi
- fi
-
- XPM_LINK=""
- echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:8387: checking for Xpm library" >&5
-
+
+ XPM_LINK=""
+ echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
+echo "configure:10090: checking for Xpm library" >&5
+
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
do
done
done
- if test "$ac_find_libraries" != "" ; then
-
+ if test "$ac_find_libraries" != "" ; then
+
echo "$GUI_TK_LIBRARY" | grep "\-L$ac_find_libraries" > /dev/null
result=$?
if test $result = 0; then
ac_path_to_link="-L$ac_find_libraries"
fi
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
- XPM_LINK="-lXpm "
- cat >> confdefs.h <<\EOF
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ XPM_LINK="-lXpm "
+ cat >> confdefs.h <<\EOF
#define wxHAVE_LIB_XPM 1
EOF
- echo "$ac_t""found at $ac_find_libraries" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
-#line 8419 "configure"
+ echo "$ac_t""found at $ac_find_libraries" 1>&6
+ else
+ cat > conftest.$ac_ext <<EOF
+#line 10122 "configure"
#include "confdefs.h"
- #include <X11/xpm.h>
-
+ #include <X11/xpm.h>
+
int main() {
- int version;
+ int version;
- version = XpmLibraryVersion();
-
+ version = XpmLibraryVersion();
+
; return 0; }
EOF
-if { (eval echo configure:8432: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10135: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- XPM_LINK="-lXpm "
- cat >> confdefs.h <<\EOF
+ XPM_LINK="-lXpm "
+ cat >> confdefs.h <<\EOF
#define wxHAVE_LIB_XPM 1
EOF
- echo "$ac_t""found in default search path" 1>&6
- COMPILED_X_PROGRAM=0
-
+ echo "$ac_t""found in default search path" 1>&6
+ COMPILED_X_PROGRAM=0
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- echo "$ac_t""no" 1>&6
- echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
+ echo "$ac_t""no" 1>&6
+ echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
+
-
fi
rm -f conftest*
+ fi
+
+ GUI_TK_LINK="-lXm $XPM_LINK -lXmu -lXext -lXt -lX11"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
+ TOOLKIT=MOTIF
+ GUIDIST=MOTIF_DIST
fi
- GUI_TK_LINK="-lXm $XPM_LINK -lXmu -lXext -lXt -lX11 -lm"
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
- TOOLKIT=MOTIF
+ if test "$wxUSE_MAC" = 1; then
+ TOOLKIT=MAC
+ GUIDIST=MACX_DIST
+ fi
- GUIHEADERS="\$(MOTIF_HEADERS)"
- GUIOBJS="\$(MOTIF_GUIOBJS)"
- COMMONOBJS="\$(MOTIF_COMMONOBJS)"
- GENERICOBJS="\$(MOTIF_GENERICOBJS)"
- GUIDEPS="\$(MOTIF_GUIDEPS)"
- COMMONDEPS="\$(MOTIF_COMMONDEPS)"
- GENERICDEPS="\$(MOTIF_GENERICDEPS)"
- UNIXOBJS="\$(UNIX_OBJS)"
- UNIXDEPS="\$(UNIX_DEPS)"
- GUIDIST=MOTIF_DIST
-fi
+ if test "$wxUSE_PM" = 1; then
+ TOOLKIT=PM
+ GUIDIST=GTK_DIST
+ fi
-if test "$wxUSE_PM" = 1; then
- TOOLKIT=PM
+ if test "$TOOLKIT" != "PM" ; then
+ TOOLKIT_DIR=`echo ${TOOLKIT} | tr "[A-Z]" "[a-z]"`
+ else
+ TOOLKIT_DIR="os2"
+ fi
- GUIOBJS="\$(PM_GUIOBJS)"
- GUIHEADERS="\$(PM_HEADERS)"
- COMMONOBJS="\$(PM_COMMONOBJS)"
- GENERICOBJS="\$(PM_GENERICOBJS)"
- GUIDEPS="\$(PM_GUIDEPS)"
- COMMONDEPS="\$(PM_COMMONDEPS)"
- GENERICDEPS="\$(PM_GENERICDEPS)"
- UNIXOBJS=
- UNIXDEPS=
- GUIDIST=GTK_DIST
-fi
+ TOOLKIT_NAME="${TOOLKIT_DIR}"
-if test "$TOOLKIT" != "PM" ; then
- TOOLKIT_DIR=`echo ${TOOLKIT} | tr "[A-Z]" "[a-z]"`
-else
- TOOLKIT_DIR="os2"
-fi
+ TOOLKIT_VPATH="\${top_srcdir}/src/${TOOLKIT_DIR}"
+
+ if test "$TOOLKIT_NAME" = "motif"; then
+ TOOLKIT_VPATH="${TOOLKIT_VPATH}${PATH_IFS}\${top_srcdir}/src/motif/xmcombo"
+ fi
+
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ TOOLKIT_NAME="${TOOLKIT_NAME}univ"
+ UNIV_VPATH="\${top_srcdir}/src/univ${PATH_IFS}\${top_srcdir}/src/univ/themes"
+ TOOLKIT_VPATH="${UNIV_VPATH}${PATH_IFS}${TOOLKIT_VPATH}"
+ SETUPH_DIR="univ"
+ else
+ SETUPH_DIR="${TOOLKIT_DIR}"
+ fi
+
+ if test "$wxUSE_DEBUG_FLAG" = "yes"; then
+ TOOLKIT_NAME="${TOOLKIT_NAME}d"
+ fi
TOOLKIT_DEF="-D__WX${TOOLKIT}__"
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ TOOLKIT_DEF="${TOOLKIT_DEF} -D__WXUNIVERSAL__"
+ fi
+
+ WX_LIBRARY="wx_${TOOLKIT_NAME}"
+
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ ALL_OBJECTS="\$(GUI_LOWLEVEL_OBJS) \${UNIVOBJS}"
+ else
+ ALL_OBJECTS="\$(GUIOBJS)"
+ fi
+
+ ALL_OBJECTS="${ALL_OBJECTS} \$(COMMONOBJS) \$(GENERICOBJS)"
- WX_LIBRARY="wx_${TOOLKIT_DIR}"
+ if test "$TOOLKIT" != "MSW"; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(UNIXOBJS)"
+ fi
- ALL_OBJECTS="\$(GUIOBJS) \$(COMMONOBJS) \$(GENERICOBJS) \$(UNIXOBJS) \$(HTMLOBJS) \$(OGLOBJS)"
+ if test "$wxUSE_HTML" = "yes"; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(HTMLOBJS)"
+ fi
if test "$TOOLKIT" != "MSW"; then
if test "$wxUSE_ODBC" = "yes" ; then
if test "$wxUSE_ZLIB" = "yes" ; then
ALL_OBJECTS="${ALL_OBJECTS} \$(ZLIBOBJS)"
fi
- ALL_DEPFILES="\$(GUIDEPS) \$(COMMONDEPS) \$(GENERICDEPS) \$(UNIXDEPS) \$(HTMLDEPS) \$(OGLDEPS)"
+ if test "$wxUSE_FREETYPE" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(FREETYPEOBJS)"
+ fi
+
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ ALL_DEPFILES="\$(GUI_LOWLEVEL_DEPS) \$(UNIVDEPS)"
+ else
+ ALL_DEPFILES="\$(GUIDEPS)"
+ fi
- PORT_FILES="src/\$(TOOLKITDIR)/files.lst"
+ ALL_DEPFILES="${ALL_DEPFILES} \$(COMMONDEPS) \$(GENERICDEPS)"
+
+ if test "$TOOLKIT" != "MSW"; then
+ ALL_DEPFILES="${ALL_DEPFILES} \$(UNIXDEPS)"
+ fi
+
+ if test "$wxUSE_HTML" = "yes"; then
+ ALL_DEPFILES="${ALL_DEPFILES} \$(HTMLDEPS)"
+ fi
+
+ PORT_FILES="src/\$(TOOLKITDIR)/files.lst"
+ if test "$wxUSE_UNIVERSAL" = "yes"; then
+ PORT_FILES="${PORT_FILES} \${top_srcdir}/src/univ/files.lst"
+ fi
RPM_FILES="src/\$(TOOLKITDIR)/rpmfiles.lst"
RPM_SPEC="wx\$(TOOLKIT).spec"
else
USE_GUI=0
- TOOLKIT_DIR="base"
+ TOOLKIT_DIR="base"
+
+ if test "$wxUSE_DEBUG_FLAG" = "yes"; then
+ TOOLKIT_NAME="${TOOLKIT_DIR}d"
+ else
+ TOOLKIT_NAME="${TOOLKIT_DIR}"
+ fi
+
TOOLKIT_DEF="-D__WXBASE__"
- ALL_OBJECTS="\$(BASE_OBJS) \${BASE_UNIX_OBJS}"
- ALL_DEPFILES="\${BASE_DEPS} \${BASE_UNIX_DEPS}"
+ ALL_OBJECTS="\$(BASE_OBJS) \$(BASE_UNIX_OBJS)"
+ ALL_DEPFILES="\$(BASE_DEPS) \$(BASE_UNIX_DEPS)"
+
+ if test "$wxUSE_ZLIB" = "yes" ; then
+ ALL_OBJECTS="${ALL_OBJECTS} \$(ZLIBOBJS)"
+ fi
- WX_LIBRARY="wxbase"
+ WX_LIBRARY="wx_${TOOLKIT_NAME}"
PORT_FILES="src/files.lst"
RPM_FILES="src/rpmfiles.lst"
WX_ALL=
WX_ALL_INSTALLED=
BURNT_LIBRARY_NAME=
+WX_TARGET_LIBRARY_SONAME=
if test "$wxUSE_SHARED" = "yes"; then
SHARED_LD="${CC} -shared -fPIC -o"
PIC_FLAG="-fPIC"
else
+ LDFLAGS="-L/usr/lib"
+
SHARED_LD="${CXX} -b -o"
PIC_FLAG="+Z"
fi
- WX_LIBRARY_NAME_SHARED="libwx_${TOOLKIT_DIR}.sl"
- WX_LIBRARY_NAME_SHARED_GL="libwx_${TOOLKIT_DIR}_gl.sl"
+ WX_LIBRARY_NAME_SHARED="libwx_${TOOLKIT_NAME}.sl"
+ WX_LIBRARY_NAME_SHARED_GL="libwx_${TOOLKIT_NAME}_gl.sl"
if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
WX_ALL="${WX_LIBRARY_NAME_SHARED} ${WX_LIBRARY_NAME_SHARED_GL}"
else
WX_ALL="${WX_LIBRARY_NAME_SHARED}"
if test "$wxUSE_BURNT_NAME" = "yes" ; then
BURNT_LIBRARY_NAME="-Wl,-soname,${WX_LIBRARY_LINK1}"
BURNT_LIBRARY_NAME_GL="-Wl,-soname,${WX_LIBRARY_LINK1_GL}"
+ WX_TARGET_LIBRARY_SONAME="-Wl,-soname,\$(TARGETLIB_LINK1)"
fi
if test "$wxUSE_OPENGL" = "yes"; then
WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
if test "$GCC" = yes ; then
SHARED_LD="${CC} -shared -o"
PIC_FLAG="-fPIC"
+
+ CPPFLAGS="$CPPFLAGS -isystem /usr/openwin/include"
else
SHARED_LD="${CXX} -G -o"
PIC_FLAG="-KPIC"
WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
WX_ALL="CREATE_LINKS"
;;
- *-*-freebsd* | *-*-netbsd*)
+ *-*-freebsd* | *-*-openbsd* | *-*-netbsd* )
SHARED_LD="${CC} -shared -o"
PIC_FLAG="-fPIC"
- WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
- WX_ALL="CREATE_LINKS"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
+ WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
+ else
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ fi
+ ;;
+ *-*-darwin* )
+ SHARED_LD="${CXX} -dynamiclib -o"
+ PIC_FLAG="-dynamic -fPIC"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
+ WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
+ else
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+ WX_ALL="CREATE_LINKS"
+ fi
+ WX_ALL="${WX_ALL} ./lib/lib${WX_LIBRARY}-${WX_RELEASE}.r"
+ WX_LIBRARY_NAME_SHARED="lib${WX_LIBRARY}-${WX_RELEASE}.dylib.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
+ WX_LIBRARY_NAME_SHARED_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.dylib.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
+ WX_LIBRARY_LINK1="lib${WX_LIBRARY}-${WX_RELEASE}.dylib.${WX_CURRENT}"
+ WX_LIBRARY_LINK2="lib${WX_LIBRARY}-${WX_RELEASE}.dylib"
+ WX_LIBRARY_LINK3="lib${WX_LIBRARY}.dylib"
+ WX_LIBRARY_LINK1_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.dylib.${WX_CURRENT}"
+ WX_LIBRARY_LINK2_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.dylib"
+ WX_LIBRARY_LINK3_GL="lib${WX_LIBRARY}_gl.dylib"
;;
*-*-osf* )
SHARED_LD="${CXX} -shared -o"
SHARED_LD="/usr/lpp/xlC/bin/makeC++SharedLib -p 0 -o"
WX_ALL=${WX_LIBRARY_NAME_SHARED}
;;
- *-*-cygwin32* )
+ *-*-cygwin* )
WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
- WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
+ WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
+ else
+ WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ fi
;;
*-*-mingw32* )
WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
- WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
+ WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
+ else
+ WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ fi
;;
*-pc-os2_emx )
WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
fi
WX_TARGET_LIBRARY_TYPE="so"
else
- WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
- WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
- WX_ALL="${WX_LIBRARY_NAME_STATIC}"
- WX_TARGET_LIBRARY_TYPE="a"
+ WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
+ WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
+
+ if test "$wxUSE_OPENGL" = "yes"; then
+ WX_ALL_INSTALLED="preinstall_gl"
+ WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
+ else
+ WX_ALL="${WX_LIBRARY_NAME_STATIC}"
+ fi
+
+ if test "$wxUSE_GUI" = "no"; then
+ WX_ALL_INSTALLED="${WX_ALL_INSTALLED} preinstall"
+ fi
+
+ WX_TARGET_LIBRARY_TYPE="a"
+fi
+
+
+for ac_hdr in strings.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:10518: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10523 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:10528: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
-
-for ac_hdr in strings.h
+for ac_hdr in stdlib.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8707: checking for $ac_hdr" >&5
+echo "configure:10558: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8712 "configure"
+#line 10563 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10568: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8747: checking for $ac_hdr" >&5
+echo "configure:10598: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8752 "configure"
+#line 10603 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8757: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10608: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8787: checking for $ac_hdr" >&5
+echo "configure:10638: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8792 "configure"
+#line 10643 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8827: checking for $ac_hdr" >&5
+echo "configure:10678: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8832 "configure"
+#line 10683 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8837: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10688: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8867: checking for $ac_hdr" >&5
+echo "configure:10718: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10723 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:10728: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in iconv.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:10758: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10763 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:10768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in langinfo.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:10798: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8872 "configure"
+#line 10803 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8877: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10808: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8910: checking for $ac_hdr" >&5
+echo "configure:10841: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8915 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10851: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:8951: checking for ANSI C header files" >&5
+echo "configure:10882: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8956 "configure"
+#line 10887 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 8981 "configure"
+#line 10912 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 8999 "configure"
+#line 10930 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 9020 "configure"
+#line 10951 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:9031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:9055: checking for mode_t" >&5
+echo "configure:10986: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9060 "configure"
+#line 10991 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:9088: checking for off_t" >&5
+echo "configure:11019: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9093 "configure"
+#line 11024 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:9121: checking for pid_t" >&5
+echo "configure:11052: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9126 "configure"
+#line 11057 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:9154: checking for size_t" >&5
+echo "configure:11085: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9159 "configure"
+#line 11090 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:9187: checking for uid_t in sys/types.h" >&5
+echo "configure:11118: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9192 "configure"
+#line 11123 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
+echo $ac_n "checking for wchar_t""... $ac_c" 1>&6
+echo "configure:11153: checking for wchar_t" >&5
+if eval "test \"`echo '$''{'wx_cv_type_wchar_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 11159 "configure"
+#include "confdefs.h"
+#include <wchar.h>
+int main() {
+
+ wchar_t wc, *ws;
+ wc = L'a';
+ ws = L"Hello, world!";
+
+; return 0; }
+EOF
+if { (eval echo configure:11170: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ wx_cv_type_wchar_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ cat > conftest.$ac_ext <<EOF
+#line 11178 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+int main() {
+
+ wchar_t wc, *ws;
+ wc = L'a';
+ ws = L"Hello, world!";
+
+; return 0; }
+EOF
+if { (eval echo configure:11189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ wx_cv_type_wchar_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ wx_cv_type_wchar_t=no
+fi
+rm -f conftest*
+
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_type_wchar_t" 1>&6
+
+if test "$wx_cv_type_wchar_t" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_WCHAR_T 1
+EOF
+
+fi
+
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo $ac_n "checking if size_t is unsigned int""... $ac_c" 1>&6
+echo "configure:11223: checking if size_t is unsigned int" >&5
+if eval "test \"`echo '$''{'wx_cv_size_t_is_uint'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 11228 "configure"
+#include "confdefs.h"
+#include <stddef.h>
+int main() {
+
+ return 0; }
+
+ struct Foo { void foo(size_t); void foo(unsigned int); };
+
+ int bar() {
+
+; return 0; }
+EOF
+if { (eval echo configure:11241: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ wx_cv_size_t_is_uint=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ wx_cv_size_t_is_uint=yes
+
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_size_t_is_uint" 1>&6
+
+if test "$wx_cv_size_t_is_uint" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxSIZE_T_IS_UINT 1
+EOF
+
+else
+ echo $ac_n "checking if size_t is unsigned long""... $ac_c" 1>&6
+echo "configure:11264: checking if size_t is unsigned long" >&5
+if eval "test \"`echo '$''{'wx_cv_size_t_is_ulong'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 11269 "configure"
+#include "confdefs.h"
+#include <stddef.h>
+int main() {
+
+ return 0; }
+
+ struct Foo { void foo(size_t); void foo(unsigned long); };
+
+ int bar() {
+
+; return 0; }
+EOF
+if { (eval echo configure:11282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ wx_cv_size_t_is_ulong=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ wx_cv_size_t_is_ulong=yes
+
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_size_t_is_ulong" 1>&6
+
+ if test "$wx_cv_size_t_is_ulong" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxSIZE_T_IS_ULONG 1
+EOF
+
+ fi
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
echo $ac_n "checking for pw_gecos in struct passwd""... $ac_c" 1>&6
-echo "configure:9223: checking for pw_gecos in struct passwd" >&5
+echo "configure:11316: checking for pw_gecos in struct passwd" >&5
if eval "test \"`echo '$''{'wx_cv_struct_pw_gecos'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9229 "configure"
+#line 11322 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:9240: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11333: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_pw_gecos=yes
- cat >> confdefs.h <<\EOF
-#define HAVE_PW_GECOS 1
-EOF
-
else
echo "configure: failed program was:" >&5
echo "$ac_t""$wx_cv_struct_pw_gecos" 1>&6
+if test "$wx_cv_struct_pw_gecos" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PW_GECOS 1
+EOF
+
+fi
+
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:9267: checking for working const" >&5
+echo "configure:11363: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9272 "configure"
+#line 11368 "configure"
#include "confdefs.h"
int main() {
/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x = {0,0};
+typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this. */
char const *const *ccp;
char **p;
; return 0; }
EOF
-if { (eval echo configure:9321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11417: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:9342: checking for inline" >&5
+echo "configure:11438: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 9349 "configure"
+#line 11445 "configure"
#include "confdefs.h"
int main() {
-} int $ac_kw foo() {
+} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:9356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11452: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:9383: checking size of char" >&5
+echo "configure:11479: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_char=1
else
cat > conftest.$ac_ext <<EOF
-#line 9391 "configure"
+#line 11487 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9402: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_char=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:9422: checking size of short" >&5
+echo "configure:11518: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_short=2
else
cat > conftest.$ac_ext <<EOF
-#line 9430 "configure"
+#line 11526 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of int *""... $ac_c" 1>&6
-echo "configure:9461: checking size of int *" >&5
+echo "configure:11557: checking size of int *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int_p=4
else
cat > conftest.$ac_ext <<EOF
-#line 9469 "configure"
+#line 11565 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int_p=`cat conftestval`
else
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:9500: checking size of int" >&5
+echo "configure:11596: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int=4
else
cat > conftest.$ac_ext <<EOF
-#line 9508 "configure"
+#line 11604 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9519: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:9539: checking size of long" >&5
+echo "configure:11635: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 9547 "configure"
+#line 11643 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:9578: checking size of long long" >&5
+echo "configure:11674: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=0
else
cat > conftest.$ac_ext <<EOF
-#line 9586 "configure"
+#line 11682 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
- ac_cv_sizeof_long_long=0
+ ac_cv_sizeof_long_long=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+EOF
+
+
+
+echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6
+echo "configure:11714: checking size of wchar_t" >&5
+if eval "test \"`echo '$''{'wx_cv_sizeof_wchar_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ if test "$cross_compiling" = yes; then
+ wx_cv_sizeof_wchar_t=4
+
+else
+ cat > conftest.$ac_ext <<EOF
+#line 11724 "configure"
+#include "confdefs.h"
+
+ #ifdef HAVE_WCHAR_H
+ # include <wchar.h>
+ #endif
+ #ifdef HAVE_STDLIB_H
+ # include <stdlib.h>
+ #endif
+ #include <stdio.h>
+ int main()
+ {
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%i", sizeof(wchar_t));
+ exit(0);
+ }
+
+EOF
+if { (eval echo configure:11743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ wx_cv_sizeof_wchar_t=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ wx_cv_sizeof_wchar_t=0
fi
rm -fr conftest*
fi
+
fi
-echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+
+echo "$ac_t""$wx_cv_sizeof_wchar_t" 1>&6
+
cat >> confdefs.h <<EOF
-#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+#define SIZEOF_WCHAR_T $wx_cv_sizeof_wchar_t
EOF
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:9618: checking whether byte ordering is bigendian" >&5
+echo "configure:11767: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 9625 "configure"
+#line 11774 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:9636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11785: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 9640 "configure"
+#line 11789 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:9651: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11800: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
ac_cv_c_bigendian=unknown
else
cat > conftest.$ac_ext <<EOF
-#line 9671 "configure"
+#line 11820 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:9684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9731: checking for $ac_hdr" >&5
+echo "configure:11880: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9736 "configure"
+#line 11885 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
- if test "x$HAVE_IOSTREAM" = x ; then
+ if test "$ac_cv_header_iostream" = "yes" ; then
+ :
+ else
cat >> confdefs.h <<\EOF
#define wxUSE_IOSTREAMH 1
EOF
- else
- :
fi
ac_ext=c
echo $ac_n "checking if C++ compiler supports bool""... $ac_c" 1>&6
-echo "configure:9789: checking if C++ compiler supports bool" >&5
+echo "configure:11938: checking if C++ compiler supports bool" >&5
if eval "test \"`echo '$''{'wx_cv_cpp_bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9804 "configure"
+#line 11953 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:9816: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11965: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_BOOL 1
-EOF
-
wx_cv_cpp_bool=yes
else
echo $ac_n "checking if you need GNU extensions""... $ac_c" 1>&6
-echo "configure:9858: checking if you need GNU extensions" >&5
+echo "configure:12003: checking if you need GNU extensions" >&5
if eval "test \"`echo '$''{'wx_cv_gnu_extensions'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9864 "configure"
+#line 12009 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:9877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12022: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_gnu_extensions=yes
else
echo $ac_n "checking for wcslen in -lc""... $ac_c" 1>&6
-echo "configure:9902: checking for wcslen in -lc" >&5
+echo "configure:12047: checking for wcslen in -lc" >&5
ac_lib_var=`echo c'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9910 "configure"
+#line 12055 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:9921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for wcslen in -lw""... $ac_c" 1>&6
-echo "configure:9947: checking for wcslen in -lw" >&5
+echo "configure:12092: checking for wcslen in -lw" >&5
ac_lib_var=`echo w'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lw $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9955 "configure"
+#line 12100 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:9966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:9997: checking for vprintf" >&5
+echo "configure:12142: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10002 "configure"
+#line 12147 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char vprintf(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char vprintf();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_vprintf) || defined (__stub___vprintf)
+choke me
+#else
+vprintf();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:12170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_vprintf=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_vprintf=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_VPRINTF 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "$ac_cv_func_vprintf" != yes; then
+echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
+echo "configure:12194: checking for _doprnt" >&5
+if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 12199 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char _doprnt(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _doprnt();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub__doprnt) || defined (__stub____doprnt)
+choke me
+#else
+_doprnt();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:12222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func__doprnt=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func__doprnt=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_DOPRNT 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+
+
+
+
+
+
+echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6
+echo "configure:12253: checking for vsnprintf" >&5
+if eval "test \"`echo '$''{'wx_cv_func_vsnprintf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 12259 "configure"
+#include "confdefs.h"
+
+ #include <stdio.h>
+ #include <stdarg.h>
+
+int main() {
+
+ int wx_test_vsnprintf(const char *, ...);
+
+ wx_test_vsnprintf("%s");
+ return 0;
+ }
+
+ int wx_test_vsnprintf(const char *fmt, ...)
+ {
+ char *s;
+
+ va_list argp;
+ va_start(argp, fmt);
+ vsnprintf(s, 42, fmt, argp);
+ va_end(argp);
+
+; return 0; }
+EOF
+if { (eval echo configure:12284: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+
+ wx_cv_func_vsnprintf=yes
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+
+ cat > conftest.$ac_ext <<EOF
+#line 12295 "configure"
+#include "confdefs.h"
+
+ #include <stdio.h>
+ #include <stdarg.h>
+
+int main() {
+
+ int wx_test_vsnprintf(const char *, ...);
+
+ wx_test_vsnprintf("%s");
+ return 0;
+ }
+
+ int wx_test_vsnprintf(const char *fmt, ...)
+ {
+ char *s;
+
+ va_list argp;
+ va_start(argp, fmt);
+ _vsnprintf(s, 42, fmt, argp);
+ va_end(argp);
+
+; return 0; }
+EOF
+if { (eval echo configure:12320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+
+ wx_cv_func_vsnprintf=yes
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+
+ wx_cv_func_vsnprintf=no
+
+fi
+rm -f conftest*
+
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_func_vsnprintf" 1>&6
+
+if test "$wx_cv_func_vsnprintf" = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_VSNPRINTF 1
+EOF
+
+else
+ echo "configure: warning: unsafe function sprintf will be used instead of snprintf" 1>&2
+fi
+
+echo $ac_n "checking for vsscanf""... $ac_c" 1>&6
+echo "configure:12352: checking for vsscanf" >&5
+if eval "test \"`echo '$''{'wx_cv_func_vsscanf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 12358 "configure"
+#include "confdefs.h"
+
+ #include <stdio.h>
+ #include <stdarg.h>
+
+int main() {
+
+ int wx_test_vsscanf(const char *, ...);
+
+ wx_test_vsscanf("%d");
+ return 0;
+ }
+
+ int wx_test_vsscanf(const char *fmt, ...)
+ {
+ va_list argp;
+ va_start(argp, fmt);
+ vsscanf("42", fmt, argp);
+ va_end(argp);
+
+; return 0; }
+EOF
+if { (eval echo configure:12381: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+
+ wx_cv_func_vsscanf=yes
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+
+ wx_cv_func_vsscanf=no
+
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_func_vsscanf" 1>&6
+
+if test "$wx_cv_func_vsscanf" = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_VSSCANF 1
+EOF
+
+fi
+
+if test "$TOOLKIT" != "MSW"; then
+
+
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo $ac_n "checking if iconv() takes char**""... $ac_c" 1>&6
+echo "configure:12419: checking if iconv() takes char**" >&5
+if eval "test \"`echo '$''{'wx_cv_iconv_takes_char'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 12425 "configure"
+#include "confdefs.h"
+#include <iconv.h>
+int main() {
+
+ char **inbuf, **outbuf;
+ iconv_t cd;
+ size_t insz, outsz;
+ iconv(cd, inbuf, &insz, outbuf, &outsz);
+
+; return 0; }
+EOF
+if { (eval echo configure:12437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ wx_cv_iconv_takes_char=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ wx_cv_iconv_takes_char=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_iconv_takes_char" 1>&6
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if test "$wx_cv_iconv_takes_char" = yes ; then
+ cat >> confdefs.h <<\EOF
+#define WX_ICONV_TAKES_CHAR 1
+EOF
+
+fi
+
+
+if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes" -a "$wxUSE_UNIX" = "yes"; then
+ for ac_func in sigaction
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:12470: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 12475 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char vprintf(); below. */
+ which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char vprintf();
+char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub_vprintf) || defined (__stub___vprintf)
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-vprintf();
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func_vprintf=yes"
+ eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_vprintf=no"
+ eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_VPRINTF 1
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
EOF
-
+
else
echo "$ac_t""no" 1>&6
fi
+done
-if test "$ac_cv_func_vprintf" != yes; then
-echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:10049: checking for _doprnt" >&5
-if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
+
+ if test "$ac_cv_func_sigaction" = "no"; then
+ echo "configure: warning: No POSIX signal functions on this system, wxApp::OnFatalException will not be called" 1>&2
+ wxUSE_ON_FATAL_EXCEPTION=no
+ fi
+
+ if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes"; then
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+ echo $ac_n "checking for sa_handler type""... $ac_c" 1>&6
+echo "configure:12539: checking for sa_handler type" >&5
+if eval "test \"`echo '$''{'wx_cv_type_sa_handler'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 10054 "configure"
+
+ cat > conftest.$ac_ext <<EOF
+#line 12545 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char _doprnt(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char _doprnt();
-
+#include <signal.h>
int main() {
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub__doprnt) || defined (__stub____doprnt)
-choke me
-#else
-_doprnt();
-#endif
+ extern void testSigHandler(int);
+ struct sigaction sa;
+ sa.sa_handler = testSigHandler;
+
; return 0; }
EOF
-if { (eval echo configure:10077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_func__doprnt=yes"
+
+ wx_cv_type_sa_handler=int
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func__doprnt=no"
+
+ wx_cv_type_sa_handler=void
+
fi
rm -f conftest*
+
fi
-if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_DOPRNT 1
-EOF
+echo "$ac_t""$wx_cv_type_sa_handler" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
-fi
+ cat >> confdefs.h <<EOF
+#define wxTYPE_SA_HANDLER $wx_cv_type_sa_handler
+EOF
+
+ fi
+fi
-for ac_func in vsnprintf
+for ac_func in vfork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10105: checking for $ac_func" >&5
+echo "configure:12594: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10110 "configure"
+#line 12599 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
- cat >> confdefs.h <<\EOF
-#define HAVE_VSNPRINTF 1
-EOF
-
+
else
echo "$ac_t""no" 1>&6
-echo "configure: warning: unsafe function sprintf will be used instead of snprintf" 1>&2
-
fi
done
-
-ac_ext=C
-# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cxx_cross
-
-
-echo $ac_n "checking for vsscanf""... $ac_c" 1>&6
-echo "configure:10173: checking for vsscanf" >&5
-if eval "test \"`echo '$''{'wx_cv_func_vsscanf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
- if test "$cross_compiling" = yes; then
- wx_cv_func_vsscanf=no
-
-else
- cat > conftest.$ac_ext <<EOF
-#line 10183 "configure"
-#include "confdefs.h"
-#ifdef __cplusplus
-extern "C" void exit(int);
-#endif
-
- #include <stdio.h>
- #include <stdarg.h>
-
- int try_vsscanf(const char *format, ...)
- {
- va_list ap;
- va_start(ap, format);
-
- vsscanf("17", format, ap);
-
- va_end(ap);
- }
-
- int main()
- {
- int i;
- try_vsscanf("%d", &i);
- return i == 17 ? 0 : 1;
- }
-
-EOF
-if { (eval echo configure:10210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-
- cat >> confdefs.h <<\EOF
-#define HAVE_VSSCANF 1
-EOF
-
- wx_cv_func_vsscanf=yes
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- wx_cv_func_vsscanf=no
-fi
-rm -fr conftest*
-fi
-
-
-fi
-
-echo "$ac_t""$wx_cv_func_vsscanf" 1>&6
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-
-if test "$TOOLKIT" != "MSW"; then
-
-if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes" -a "$wxUSE_UNIX" = "yes"; then
- for ac_func in sigaction
+if test "$wxUSE_SNGLINST_CHECKER" = "yes"; then
+ for ac_func in fcntl flock
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10247: checking for $ac_func" >&5
+echo "configure:12651: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10252 "configure"
+#line 12656 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
-
+ break
else
echo "$ac_t""no" 1>&6
fi
done
- if test "$ac_cv_func_sigaction" = "no"; then
- echo "configure: warning: No POSIX signal functions on this system, wxApp::OnFatalException will not be called" 1>&2
- wxUSE_ON_FATAL_EXCEPTION=no
+ if test "$ac_cv_func_fcntl" != "yes" -a "$ac_cv_func_flock" != "yes"; then
+ echo "configure: warning: wxSingleInstanceChecker not available" 1>&2
+ wxUSE_SNGLINST_CHECKER=no
fi
fi
-for ac_func in vfork
+for ac_func in timegm
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10309: checking for $ac_func" >&5
+echo "configure:12713: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10314 "configure"
+#line 12718 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
-for ac_func in timegm
+for ac_func in putenv setenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10365: checking for $ac_func" >&5
+echo "configure:12769: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10370 "configure"
+#line 12774 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
-
+ break
else
echo "$ac_t""no" 1>&6
fi
HAVE_SOME_SLEEP_FUNC=1
fi
+if test "$USE_MAC" = 1; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_USLEEP 1
+EOF
+
+ HAVE_SOME_SLEEP_FUNC=1
+fi
+
if test "$HAVE_SOME_SLEEP_FUNC" != 1; then
POSIX4_LINK=
for ac_func in nanosleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10432: checking for $ac_func" >&5
+echo "configure:12844: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10437 "configure"
+#line 12849 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12872: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6
-echo "configure:10485: checking for nanosleep in -lposix4" >&5
+echo "configure:12897: checking for nanosleep in -lposix4" >&5
ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10493 "configure"
+#line 12905 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
nanosleep()
; return 0; }
EOF
-if { (eval echo configure:10504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in usleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10532: checking for $ac_func" >&5
+echo "configure:12944: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10537 "configure"
+#line 12949 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
-
+ cat >> confdefs.h <<\EOF
+#define HAVE_USLEEP 1
+EOF
+
else
echo "$ac_t""no" 1>&6
+echo "configure: warning: wxSleep() function will not work" 1>&2
+
fi
done
- echo "configure: warning: wxSleep() function will not work" 1>&2
fi
for ac_func in uname gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10599: checking for $ac_func" >&5
+echo "configure:13015: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10604 "configure"
+#line 13020 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strtok_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10664: checking for $ac_func" >&5
+echo "configure:13080: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10669 "configure"
+#line 13085 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10732: checking for $ac_func" >&5
+echo "configure:13148: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10737 "configure"
+#line 13153 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
-echo "configure:10785: checking for inet_addr in -lnsl" >&5
+echo "configure:13201: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10793 "configure"
+#line 13209 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:10804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lresolv""... $ac_c" 1>&6
-echo "configure:10823: checking for inet_addr in -lresolv" >&5
+echo "configure:13239: checking for inet_addr in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10831 "configure"
+#line 13247 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:10842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in inet_aton
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10875: checking for $ac_func" >&5
+echo "configure:13291: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10880 "configure"
+#line 13296 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_aton in -l$INET_LINK""... $ac_c" 1>&6
-echo "configure:10928: checking for inet_aton in -l$INET_LINK" >&5
+echo "configure:13344: checking for inet_aton in -l$INET_LINK" >&5
ac_lib_var=`echo $INET_LINK'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$INET_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10936 "configure"
+#line 13352 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:10947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_THREADS" = "yes" ; then
- echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:11054: checking for pthread_create in -lpthread" >&5
-ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
+ if test "$USE_AIX" = 1; then
+ THREADS_LIB=pthreads
+ else
+ THREADS_LIB=pthread
+ fi
+
+ echo $ac_n "checking for pthread_create in -l$THREADS_LIB""... $ac_c" 1>&6
+echo "configure:13476: checking for pthread_create in -l$THREADS_LIB" >&5
+ac_lib_var=`echo $THREADS_LIB'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-lpthread $LIBS"
+LIBS="-l$THREADS_LIB $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11062 "configure"
+#line 13484 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:11073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""yes" 1>&6
THREADS_OBJ="threadpsx.lo"
- THREADS_LINK="pthread"
+ THREADS_LINK=$THREADS_LIB
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:11096: checking for pthread_create in -lc_r" >&5
+echo "configure:13518: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11104 "configure"
+#line 13526 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:11115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
ac_safe=`echo "sys/prctl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/prctl.h""... $ac_c" 1>&6
-echo "configure:11139: checking for sys/prctl.h" >&5
+echo "configure:13561: checking for sys/prctl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11144 "configure"
+#line 13566 "configure"
#include "confdefs.h"
#include <sys/prctl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13571: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in thr_setconcurrency
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:11189: checking for $ac_func" >&5
+echo "configure:13611: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11194 "configure"
+#line 13616 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:11217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:11247: checking for $ac_hdr" >&5
+echo "configure:13669: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11252 "configure"
+#line 13674 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11257: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13679: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for sched_yield in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:11285: checking for sched_yield in -l$THREADS_LINK" >&5
+echo "configure:13707: checking for sched_yield in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11293 "configure"
+#line 13715 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:11304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
-echo $ac_n "checking for sched_yield in -l"posix4"""... $ac_c" 1>&6
-echo "configure:11326: checking for sched_yield in -l"posix4"" >&5
-ac_lib_var=`echo "posix4"'_'sched_yield | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
+echo "configure:13748: checking for sched_yield in -lposix4" >&5
+ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-l"posix4" $LIBS"
+LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11334 "configure"
+#line 13756 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
char sched_yield();
int main() {
-sched_yield()
+sched_yield()
+; return 0; }
+EOF
+if { (eval echo configure:13767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_SCHED_YIELD 1
+EOF
+ POSIX4_LINK="-lposix4"
+else
+ echo "$ac_t""no" 1>&6
+echo "configure: warning: wxThread::Yield will not work properly" 1>&2
+
+fi
+
+
+fi
+
+
+ HAVE_PRIOR_FUNCS=0
+ echo $ac_n "checking for pthread_attr_getschedpolicy in -l$THREADS_LINK""... $ac_c" 1>&6
+echo "configure:13798: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5
+ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$THREADS_LINK $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13806 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_attr_getschedpolicy();
+
+int main() {
+pthread_attr_getschedpolicy()
+; return 0; }
+EOF
+if { (eval echo configure:13817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for pthread_attr_setschedparam in -l$THREADS_LINK""... $ac_c" 1>&6
+echo "configure:13833: checking for pthread_attr_setschedparam in -l$THREADS_LINK" >&5
+ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_setschedparam | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$THREADS_LINK $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 13841 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_attr_setschedparam();
+
+int main() {
+pthread_attr_setschedparam()
; return 0; }
EOF
-if { (eval echo configure:11345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_SCHED_YIELD 1
-EOF
- POSIX4_LINK="-lposix4"
-else
- echo "$ac_t""no" 1>&6
-echo "configure: warning: wxThread::Yield will not work properly" 1>&2
-
-fi
-
-
-fi
-
-
- echo $ac_n "checking for pthread_attr_getschedpolicy in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:11375: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5
-ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'`
+ echo $ac_n "checking for sched_get_priority_max in -l$THREADS_LINK""... $ac_c" 1>&6
+echo "configure:13868: checking for sched_get_priority_max in -l$THREADS_LINK" >&5
+ac_lib_var=`echo $THREADS_LINK'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11383 "configure"
+#line 13876 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char pthread_attr_getschedpolicy();
+char sched_get_priority_max();
int main() {
-pthread_attr_getschedpolicy()
+sched_get_priority_max()
; return 0; }
EOF
-if { (eval echo configure:11394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_THREAD_PRIORITY_FUNCTIONS 1
-EOF
-
+ HAVE_PRIOR_FUNCS=1
else
echo "$ac_t""no" 1>&6
-echo $ac_n "checking for pthread_attr_getschedpolicy in -l"posix4"""... $ac_c" 1>&6
-echo "configure:11416: checking for pthread_attr_getschedpolicy in -l"posix4"" >&5
-ac_lib_var=`echo "posix4"'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for sched_get_priority_max in -lposix4""... $ac_c" 1>&6
+echo "configure:13906: checking for sched_get_priority_max in -lposix4" >&5
+ac_lib_var=`echo posix4'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-l"posix4" $LIBS"
+LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11424 "configure"
+#line 13914 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char pthread_attr_getschedpolicy();
+char sched_get_priority_max();
int main() {
-pthread_attr_getschedpolicy()
+sched_get_priority_max()
; return 0; }
EOF
-if { (eval echo configure:11435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_THREAD_PRIORITY_FUNCTIONS 1
-EOF
- POSIX4_LINK="-lposix4"
+
+ HAVE_PRIOR_FUNCS=1
+ POSIX4_LINK="-lposix4"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+
else
echo "$ac_t""no" 1>&6
-echo "configure: warning: Setting thread priority will not work" 1>&2
-
fi
+else
+ echo "$ac_t""no" 1>&6
fi
+ if test "$HAVE_PRIOR_FUNCS" = 1; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_THREAD_PRIORITY_FUNCTIONS 1
+EOF
+
+ else
+ echo "configure: warning: Setting thread priority will not work" 1>&2
+ fi
+
echo $ac_n "checking for pthread_cancel in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:11465: checking for pthread_cancel in -l$THREADS_LINK" >&5
+echo "configure:13972: checking for pthread_cancel in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_cancel | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11473 "configure"
+#line 13980 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_cancel()
; return 0; }
EOF
-if { (eval echo configure:11484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for pthread_cleanup_push/pop""... $ac_c" 1>&6
-echo "configure:11510: checking for pthread_cleanup_push/pop" >&5
+echo "configure:14017: checking for pthread_cleanup_push/pop" >&5
if eval "test \"`echo '$''{'wx_cv_func_pthread_cleanup_push'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11516 "configure"
+#line 14023 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:11526: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14033: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_pthread_cleanup_push=yes
- cat >> confdefs.h <<\EOF
-#define HAVE_THREAD_CLEANUP_FUNCTIONS 1
-EOF
-
else
echo "configure: failed program was:" >&5
echo "$ac_t""$wx_cv_func_pthread_cleanup_push" 1>&6
+ if test "$wx_cv_func_pthread_cleanup_push" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_THREAD_CLEANUP_FUNCTIONS 1
+EOF
+
+ fi
+
+
+ echo $ac_n "checking for pthread_mutexattr_t""... $ac_c" 1>&6
+echo "configure:14061: checking for pthread_mutexattr_t" >&5
+if eval "test \"`echo '$''{'wx_cv_type_pthread_mutexattr_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 14067 "configure"
+#include "confdefs.h"
+#include <pthread.h>
+int main() {
+
+ pthread_mutexattr_t attr;
+ pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE);
+
+; return 0; }
+EOF
+if { (eval echo configure:14077: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+
+ wx_cv_type_pthread_mutexattr_t=yes
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+
+ wx_cv_type_pthread_mutexattr_t=no
+
+
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_type_pthread_mutexattr_t" 1>&6
+
+ if test "$wx_cv_type_pthread_mutexattr_t" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PTHREAD_MUTEXATTR_T 1
+EOF
+
+ else
+ echo $ac_n "checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER""... $ac_c" 1>&6
+echo "configure:14104: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
+if eval "test \"`echo '$''{'wx_cv_type_pthread_rec_mutex_init'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 14110 "configure"
+#include "confdefs.h"
+#include <pthread.h>
+int main() {
+
+ pthread_mutex_t attr = PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP;
+
+; return 0; }
+EOF
+if { (eval echo configure:14119: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+
+ wx_cv_type_pthread_rec_mutex_init=yes
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+
+ wx_cv_type_pthread_rec_mutex_init=no
+
+
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$wx_cv_type_pthread_rec_mutex_init" 1>&6
+ if test "$wx_cv_type_pthread_rec_mutex_init" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PTHREAD_RECURSIVE_MUTEX_INITIALIZER 1
+EOF
+
+ else
+ echo "configure: warning: wxMutex won't be recursive on this platform" 1>&2
+ fi
+ fi
+
THREADS_LINK="-l$THREADS_LINK"
+
+ if test "$USE_SOLARIS" = "yes" -a "$GCC" != "yes"; then
+ CFLAGS="${CFLAGS} -mt"
+ CXXFLAGS="${CXXFLAGS} -mt"
+ LDFLAGS="${LDFLAGS} -mt"
+ fi
fi
fi
EOF
+ if test "$wxUSE_MAC" = "0"; then
CFLAGS="${CFLAGS} -D_REENTRANT"
- CXXFLAGS="${CXXFLAGS} -D_REENTRANT"
+ CXXFLAGS="${CXXFLAGS} -D_REENTRANT"
+ fi
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS thread"
else
if test "$ac_cv_func_strtok_r" = "yes"; then
echo $ac_n "checking if -D_REENTRANT is needed""... $ac_c" 1>&6
-echo "configure:11567: checking if -D_REENTRANT is needed" >&5
+echo "configure:14174: checking if -D_REENTRANT is needed" >&5
if test "$NEEDS_D_REENTRANT_FOR_R_FUNCS" = 1; then
CFLAGS="${CFLAGS} -D_REENTRANT"
CXXFLAGS="${CXXFLAGS} -D_REENTRANT"
fi
fi
-if test "$WXGTK13" = 1 ; then
+if test "$WXGTK20" = 1 ; then
cat >> confdefs.h <<EOF
-#define __WXGTK13__ $WXGTK13
+#define __WXGTK20__ $WXGTK20
EOF
WXGTK12=1
fi
+if test "$WXGTK127" = 1 ; then
+ cat >> confdefs.h <<EOF
+#define __WXGTK127__ $WXGTK127
+EOF
+
+fi
+
if test "$WXWINE" = 1 ; then
TOOLKIT_DEF="${TOOLKIT_DEF} -D__WXWINE__"
fi
+if test "$wxUSE_MAC" = 1 ; then
+ TOOLKIT_DEF="${TOOLKIT_DEF} -D__UNIX__ -D__POWERPC__ -DTARGET_CARBON"
+ CFLAGS="${CFLAGS} -fno-common -fpascal-strings"
+ CPPFLAGS="${CPPFLAGS} -cpp-precomp -fno-common -fpascal-strings"
+ # Extract the first word of "Rez", so it can be a program name with args.
+set dummy Rez; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:14218: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_REZ'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$REZ"; then
+ ac_cv_prog_REZ="$REZ" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_REZ="Rez"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_REZ" && ac_cv_prog_REZ="/Developer/Tools/Rez"
+fi
+fi
+REZ="$ac_cv_prog_REZ"
+if test -n "$REZ"; then
+ echo "$ac_t""$REZ" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "Derez", so it can be a program name with args.
+set dummy Derez; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:14248: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DEREZ'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DEREZ"; then
+ ac_cv_prog_DEREZ="$DEREZ" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DEREZ="Derez"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_DEREZ" && ac_cv_prog_DEREZ="/Developer/Tools/Derez"
+fi
+fi
+DEREZ="$ac_cv_prog_DEREZ"
+if test -n "$DEREZ"; then
+ echo "$ac_t""$DEREZ" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ RESCOMP=${REZ}
+ REZFLAGS="-d __UNIX__ -useDF"
+ DEREZFLAGS="Carbon.r -useDF"
+ RESFLAGS="Carbon.r -t APPL"
+ LIBWXMACRES="\$(LIBWX_MACRES)"
+ LIBWXMACRESCOMP="\$(LIBWX_MACRESCOMP)"
+fi
+
if test "$wxUSE_CYGWIN" = 1 ; then
TOOLKIT_DEF="${TOOLKIT_DEF} -D__WIN95__"
fi
DEP_INFO_FLAGS=
CODE_GEN_FLAGS=
+CODE_GEN_FLAGS_CXX=
if test "$GCC" = yes ; then
if test "$wxUSE_NO_RTTI" = "yes" ; then
- CODE_GEN_FLAGS="$CODE_GEN_FLAGS -fno-rtti"
+ CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS -fno-rtti"
fi
if test "$wxUSE_NO_EXCEPTIONS" = "yes" ; then
- CODE_GEN_FLAGS="$CODE_GEN_FLAGS -fno-exceptions"
+ CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS -fno-exceptions"
fi
if test "$wxUSE_PERMISSIVE" = "yes" ; then
CODE_GEN_FLAGS="$CODE_GEN_FLAGS -fpermissive"
ZLIB_LINK=
ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for zlib.h""... $ac_c" 1>&6
-echo "configure:11698: checking for zlib.h" >&5
+echo "configure:14385: checking for zlib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11703 "configure"
+#line 14390 "configure"
#include "confdefs.h"
#include <zlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11708: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14395: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:11725: checking for deflate in -lz" >&5
+echo "configure:14412: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11733 "configure"
+#line 14420 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:11744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
PNG_LINK=
ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for png.h""... $ac_c" 1>&6
-echo "configure:11791: checking for png.h" >&5
+echo "configure:14478: checking for png.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11796 "configure"
+#line 14483 "configure"
#include "confdefs.h"
#include <png.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11801: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14488: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6
-echo "configure:11818: checking for png_check_sig in -lpng" >&5
+echo "configure:14505: checking for png_check_sig in -lpng" >&5
ac_lib_var=`echo png'_'png_check_sig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpng -lz -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11826 "configure"
+#line 14513 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
png_check_sig()
; return 0; }
EOF
-if { (eval echo configure:11837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
-
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test "x$PNG_LINK" = "x" ; then
+ { echo "configure: error: system png library not found! Use --with-libpng=yes to use the built-in libpng" 1>&2; exit 1; }
+ fi
+ fi
+
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS png"
+fi
+
+JPEG_INCLUDE=
+if test "$wxUSE_LIBJPEG" = "yes" -o "$wxUSE_LIBJPEG" = "sys" ; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_LIBJPEG 1
+EOF
+
+ if test "$wxUSE_LIBJPEG" = "yes" ; then
+ JPEG_INCLUDE="-I\${top_srcdir}/src/jpeg"
+ else
+ JPEG_LINK=
+ ac_safe=`echo "jpeglib.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
+echo "configure:14569: checking for jpeglib.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 14574 "configure"
+#include "confdefs.h"
+#include <jpeglib.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:14579: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6
+echo "configure:14596: checking for jpeg_read_header in -ljpeg" >&5
+ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ljpeg $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 14604 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char jpeg_read_header();
+
+int main() {
+jpeg_read_header()
+; return 0; }
+EOF
+if { (eval echo configure:14615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ JPEG_LINK="-ljpeg"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
else
echo "$ac_t""no" 1>&6
fi
- if test "x$PNG_LINK" = "x" ; then
- { echo "configure: error: system png library not found! Use --with-libpng=yes to use the built-in libpng" 1>&2; exit 1; }
+ if test "x$JPEG_LINK" = "x" ; then
+ { echo "configure: error: system jpeg library not found! Use --with-libjpeg=yes to use the built-in one" 1>&2; exit 1; }
fi
fi
-
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS png"
fi
-JPEG_INCLUDE=
-if test "$wxUSE_LIBJPEG" = "yes" -o "$wxUSE_LIBJPEG" = "sys" ; then
+TIFF_INCLUDE=
+if test "$wxUSE_LIBTIFF" = "yes" -o "$wxUSE_LIBTIFF" = "sys" ; then
cat >> confdefs.h <<\EOF
-#define wxUSE_LIBJPEG 1
+#define wxUSE_LIBTIFF 1
EOF
- if test "$wxUSE_LIBJPEG" = "yes" ; then
- JPEG_INCLUDE="-I\${top_srcdir}/src/jpeg"
+ if test "$wxUSE_LIBTIFF" = "yes" ; then
+ TIFF_INCLUDE="-I\${top_srcdir}/src/tiff"
else
- JPEG_LINK=
- ac_safe=`echo "jpeglib.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
-echo "configure:11882: checking for jpeglib.h" >&5
+ TIFF_LINK=
+ ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
+echo "configure:14657: checking for tiffio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11887 "configure"
+#line 14662 "configure"
#include "confdefs.h"
-#include <jpeglib.h>
+#include <tiffio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11892: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14667: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6
-echo "configure:11909: checking for jpeg_read_header in -ljpeg" >&5
-ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'`
+ echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6
+echo "configure:14684: checking for TIFFError in -ltiff" >&5
+ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-ljpeg $LIBS"
+LIBS="-ltiff -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11917 "configure"
+#line 14692 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char jpeg_read_header();
+char TIFFError();
int main() {
-jpeg_read_header()
+TIFFError()
; return 0; }
EOF
-if { (eval echo configure:11928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- JPEG_LINK="-ljpeg"
+ TIFF_LINK="-ltiff"
else
echo "$ac_t""no" 1>&6
fi
echo "$ac_t""no" 1>&6
fi
- if test "x$JPEG_LINK" = "x" ; then
- { echo "configure: error: system jpeg library not found! Use --with-libjpeg=yes to use the built-in one" 1>&2; exit 1; }
+ if test "x$TIFF_LINK" = "x" ; then
+ { echo "configure: error: system tiff library not found! Use --with-libtiff=yes to use the built-in one" 1>&2; exit 1; }
fi
fi
fi
-TIFF_INCLUDE=
-if test "$wxUSE_LIBTIFF" = "yes" -o "$wxUSE_LIBTIFF" = "sys" ; then
+FREETYPE_INCLUDE=
+if test "$wxUSE_FREETYPE" = "yes" -o "$wxUSE_FREETYPE" = "sys" ; then
cat >> confdefs.h <<\EOF
-#define wxUSE_LIBTIFF 1
+#define wxUSE_FREETYPE 1
EOF
- if test "$wxUSE_LIBTIFF" = "yes" ; then
- TIFF_INCLUDE="-I\${top_srcdir}/src/tiff"
+ if test "$wxUSE_FREETYPE" = "yes" ; then
+ FREETYPE_INCLUDE="-I\${top_srcdir}/src/freetype"
else
- TIFF_LINK=
- ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
-echo "configure:11970: checking for tiffio.h" >&5
+ FREETYPE_LINK=
+ ac_safe=`echo "freetype.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for freetype.h""... $ac_c" 1>&6
+echo "configure:14745: checking for freetype.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11975 "configure"
+#line 14750 "configure"
#include "confdefs.h"
-#include <tiffio.h>
+#include <freetype.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14755: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6
-echo "configure:11997: checking for TIFFError in -ltiff" >&5
-ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'`
+ echo $ac_n "checking for FT_Render_Glyph in -lfreetype""... $ac_c" 1>&6
+echo "configure:14772: checking for FT_Render_Glyph in -lfreetype" >&5
+ac_lib_var=`echo freetype'_'FT_Render_Glyph | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-ltiff -lm $LIBS"
+LIBS="-lfreetype -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12005 "configure"
+#line 14780 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char TIFFError();
+char FT_Render_Glyph();
int main() {
-TIFFError()
+FT_Render_Glyph()
; return 0; }
EOF
-if { (eval echo configure:12016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- TIFF_LINK="-ltiff"
+ FREETYPE_LINK="-lfreetype"
else
echo "$ac_t""no" 1>&6
fi
+
else
echo "$ac_t""no" 1>&6
fi
- if test "x$TIFF_LINK" = "x" ; then
- { echo "configure: error: system tiff library not found! Use --with-libtiff=yes to use the built-in one" 1>&2; exit 1; }
+ if test "x$FREETYPE_LINK" = "x" ; then
+ { echo "configure: error: system freetype library not found! Use --with-freetype=yes to use the built-in freetype" 1>&2; exit 1; }
fi
fi
fi
if test "$wxUSE_OPENGL" = "yes"; then
ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6
-echo "configure:12049: checking for GL/gl.h" >&5
+echo "configure:14825: checking for GL/gl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12054 "configure"
+#line 14830 "configure"
#include "confdefs.h"
#include <GL/gl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12059: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14835: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
EOF
echo $ac_n "checking for glFlush in -lGL""... $ac_c" 1>&6
-echo "configure:12085: checking for glFlush in -lGL" >&5
+echo "configure:14861: checking for glFlush in -lGL" >&5
ac_lib_var=`echo GL'_'glFlush | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lGL $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12093 "configure"
+#line 14869 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
glFlush()
; return 0; }
EOF
-if { (eval echo configure:12104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14880: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- OPENGL_LINK="-lGL"
+ OPENGL_LINK="-lGL -lGLU"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for glFlush in -lMesaGL""... $ac_c" 1>&6
-echo "configure:12126: checking for glFlush in -lMesaGL" >&5
+echo "configure:14902: checking for glFlush in -lMesaGL" >&5
ac_lib_var=`echo MesaGL'_'glFlush | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lMesaGL $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12134 "configure"
+#line 14910 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
glFlush()
; return 0; }
EOF
-if { (eval echo configure:12145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- OPENGL_LINK="-lMesaGL"
+ OPENGL_LINK="-lMesaGL -lMesaGLU"
else
echo "$ac_t""no" 1>&6
fi
+if test "$wxUSE_TIMER" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_TIMER 1
+EOF
+
+fi
+
if test "$wxUSE_WAVE" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_WAVE 1
fi
+if test "$wxUSE_CMDLINE_PARSER" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_CMDLINE_PARSER 1
+EOF
+
+fi
+
+if test "$wxUSE_STOPWATCH" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_STOPWATCH 1
+EOF
+
+fi
+
+if test "$wxUSE_DATETIME" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_DATETIME 1
+EOF
+
+fi
+
+if test "$wxUSE_TIMEDATE" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_TIMEDATE 1
+EOF
+
+fi
+
if test "$wxUSE_FILE" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_FILE 1
fi
+if test "$wxUSE_FFILE" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_FFILE 1
+EOF
+
+fi
+
if test "$wxUSE_FILESYSTEM" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_FILESYSTEM 1
fi
+if test "$wxUSE_SNGLINST_CHECKER" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_SNGLINST_CHECKER 1
+EOF
+
+fi
+
if test "$wxUSE_BUSYINFO" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_BUSYINFO 1
EOF
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS internat"
+ GUIDIST="$GUIDIST INTL_DIST"
fi
fi
fi
-if test "$wxUSE_PLOT" = "yes"; then
+if test "$wxUSE_GEOMETRY" = "yes"; then
cat >> confdefs.h <<\EOF
-#define wxUSE_PLOT 1
+#define wxUSE_GEOMETRY 1
EOF
fi
fi
-if test "$wxUSE_TIMEDATE" = "yes"; then
+if test "$wxUSE_DATETIME" = "yes"; then
for ac_func in strptime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12347: checking for $ac_func" >&5
+echo "configure:15173: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12352 "configure"
+#line 15178 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:12375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for timezone variable in <time.h>""... $ac_c" 1>&6
-echo "configure:12401: checking for timezone variable in <time.h>" >&5
+echo "configure:15227: checking for timezone variable in <time.h>" >&5
if eval "test \"`echo '$''{'wx_cv_var_timezone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12407 "configure"
+#line 15233 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12419: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15245: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=__timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12430 "configure"
+#line 15256 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12442: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15268: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=_timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12453 "configure"
+#line 15279 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12465: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15291: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=timezone
for ac_func in localtime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12500: checking for $ac_func" >&5
+echo "configure:15326: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12505 "configure"
+#line 15331 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:12528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_localtime" = "yes"; then
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:12555: checking for tm_gmtoff in struct tm" >&5
+echo "configure:15381: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'wx_cv_struct_tm_has_gmtoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12561 "configure"
+#line 15387 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15399: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_tm_has_gmtoff=yes
- cat >> confdefs.h <<\EOF
-#define WX_GMTOFF_IN_TM 1
-EOF
-
else
echo "configure: failed program was:" >&5
fi
echo "$ac_t""$wx_cv_struct_tm_has_gmtoff" 1>&6
+ fi
+
+ if test "$wx_cv_struct_tm_has_gmtoff" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define WX_GMTOFF_IN_TM 1
+EOF
+
fi
for ac_func in gettimeofday ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12599: checking for $ac_func" >&5
+echo "configure:15428: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12604 "configure"
+#line 15433 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:12627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_gettimeofday" = "yes"; then
echo $ac_n "checking whether gettimeofday takes two arguments""... $ac_c" 1>&6
-echo "configure:12654: checking whether gettimeofday takes two arguments" >&5
+echo "configure:15483: checking whether gettimeofday takes two arguments" >&5
if eval "test \"`echo '$''{'wx_cv_func_gettimeofday_has_2_args'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12669 "configure"
+#line 15498 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:12683: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15512: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=yes
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12691 "configure"
+#line 15520 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:12704: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=no
else
if test "$wxUSE_SOCKETS" = "yes"; then
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:12750: checking for socket" >&5
+echo "configure:15579: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12755 "configure"
+#line 15584 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:12778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:12796: checking for socket in -lsocket" >&5
+echo "configure:15625: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12804 "configure"
+#line 15633 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:12815: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
-fi
if test "$wxUSE_SOCKETS" = "yes" ; then
echo $ac_n "checking what is the type of the third argument of getsockname""... $ac_c" 1>&6
-echo "configure:12849: checking what is the type of the third argument of getsockname" >&5
+echo "configure:15677: checking what is the type of the third argument of getsockname" >&5
if eval "test \"`echo '$''{'wx_cv_type_getsockname3'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12864 "configure"
+#line 15692 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:12877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15705: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=socklen_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12885 "configure"
+#line 15713 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:12898: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15726: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=size_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12906 "configure"
+#line 15734 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:12919: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=int
else
fi
fi
+fi
+
if test "$wxUSE_SOCKETS" = "yes" ; then
cat >> confdefs.h <<\EOF
#define wxUSE_SOCKETS 1
fi
+if test "$wxUSE_GUI" = "yes"; then
+
if test "$TOOLKIT" != "MSW"; then
-if test "$wxUSE_JOYSTICK" = 1; then
+if test "$wxUSE_JOYSTICK" = "yes"; then
for ac_hdr in linux/joystick.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:12977: checking for $ac_hdr" >&5
+echo "configure:15809: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12982 "configure"
+#line 15814 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:15819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
if test "$ac_cv_header_linux_joystick_h" != "yes"; then
- wxUSE_JOYSTICK=0
- echo "configure: warning: Joystick not supported yb this system" 1>&2
+ wxUSE_JOYSTICK=no
+ echo "configure: warning: Joystick not supported by this system" 1>&2
fi
fi
fi
-if test "$wxUSE_JOYSTICK" = 1; then
+if test "$wxUSE_JOYSTICK" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_JOYSTICK 1
EOF
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS joytest"
fi
+fi
+
if test "$TOOLKIT" != "MSW"; then
HAVE_DL_FUNCS=0
HAVE_SHL_FUNCS=0
if test "$wxUSE_DYNLIB_CLASS" = "yes"; then
- for ac_func in dlopen
+ if test "$USE_MAC" = 1; then
+ HAVE_DL_FUNCS=1
+ else
+ for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:13038: checking for $ac_func" >&5
+echo "configure:15875: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13043 "configure"
+#line 15880 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:13066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:13094: checking for dlopen in -ldl" >&5
+echo "configure:15931: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13102 "configure"
+#line 15939 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:13113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in shl_load
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:13142: checking for $ac_func" >&5
+echo "configure:15979: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 15984 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:16007: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SHL_LOAD 1
+EOF
+
+ HAVE_SHL_FUNCS=1
+
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld in -lshl_load""... $ac_c" 1>&6
+echo "configure:16035: checking for dld in -lshl_load" >&5
+ac_lib_var=`echo shl_load'_'dld | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lshl_load $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 16043 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dld();
+
+int main() {
+dld()
+; return 0; }
+EOF
+if { (eval echo configure:16054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+
+ HAVE_SHL_FUNCS=1
+ LIBS="$LIBS -ldld"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+done
+
+
+fi
+
+
+fi
+done
+
+
+ if test "$HAVE_DL_FUNCS" = 1; then
+ for ac_func in dlerror
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:16093: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13147 "configure"
+#line 16098 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char $ac_func();
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:16121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ cat >> confdefs.h <<\EOF
+#define HAVE_DLERROR 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlerror in -ldl""... $ac_c" 1>&6
+echo "configure:16146: checking for dlerror in -ldl" >&5
+ac_lib_var=`echo dl'_'dlerror | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 16154 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlerror();
int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
+dlerror()
; return 0; }
EOF
-if { (eval echo configure:13170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
-fi
+LIBS="$ac_save_LIBS"
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define HAVE_SHL_LOAD 1
+ cat >> confdefs.h <<\EOF
+#define HAVE_DLERROR 1
EOF
- HAVE_SHL_FUNCS=1
-
else
echo "$ac_t""no" 1>&6
fi
-done
-
-
-fi
-
fi
done
+ fi
+ fi
if test "$HAVE_DL_FUNCS" = 0; then
if test "$HAVE_SHL_FUNCS" = 0; then
fi
+if test "$wxUSE_FONTMAP" = "yes" ; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_FONTMAP 1
+EOF
+
+fi
+
if test "$wxUSE_UNICODE" = "yes" ; then
cat >> confdefs.h <<\EOF
#define wxUSE_UNICODE 1
WXODBCFLAG="-D_IODBC_"
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS db"
- IODBCOBJS="\$(IODBC_OBJS)"
-else
- IODBCOBJS=
fi
if test "$wxUSE_CLIPBOARD" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_CLIPBOARD 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define wxUSE_DATAOBJ 1
EOF
fi
wxUSE_DRAG_AND_DROP=no
fi
+ if test "$wxUSE_MAC" = 1; then
+ echo "configure: warning: Drag and drop is not yet supported under Mac OS X" 1>&2
+ wxUSE_DRAG_AND_DROP=no
+ fi
+
if test "$USE_WIN32" = 1; then
- for ac_hdr in ole2.h
+
+ for ac_hdr in ole2.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13405: checking for $ac_hdr" >&5
+echo "configure:16405: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13410 "configure"
+#line 16410 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13415: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:16415: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
- if test "x$HAVE_OLE2_H" = x ; then
+
+ if test "$ac_cv_header_ole2_h" = "yes" ; then
+ if test "$GCC" = yes ; then
+ ALL_OBJECTS="$ALL_OBJECTS \$(OLEOBJS)"
+ ALL_DEPFILES="$ALL_DEPFILES \$(OLEDEPS)"
+ CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS_CXX -fvtable-thunks"
+ LIBS="$LIBS -lole32 -luuid"
+
+ if test "$wxUSE_METAFILE" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_METAFILE 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define wxUSE_ENH_METAFILE 1
+EOF
+
+ fi
+ fi
+ else
echo "configure: warning: Drag and drop disabled because OLE headers not found" 1>&2
wxUSE_DRAG_AND_DROP=no
fi
fi
+USES_CONTROLS=0
+if test "$wxUSE_CONTROLS" = "yes"; then
+ USES_CONTROLS=1
+fi
+
if test "$wxUSE_ACCEL" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_ACCEL 1
EOF
+ USES_CONTROLS=1
+fi
+
+if test "$wxUSE_BUTTON" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_BUTTON 1
+EOF
+
+ USES_CONTROLS=1
+fi
+
+if test "$wxUSE_BMPBUTTON" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_BMPBUTTON 1
+EOF
+
+ USES_CONTROLS=1
+fi
+
+if test "$wxUSE_CALCTRL" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_CALENDARCTRL 1
+EOF
+
+ USES_CONTROLS=1
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS calendar"
fi
if test "$wxUSE_CARET" = "yes"; then
#define wxUSE_CARET 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS caret"
fi
#define wxUSE_COMBOBOX 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_CHOICE" = "yes"; then
#define wxUSE_CHOICE 1
EOF
-fi
-
-if test "$wxUSE_BMPBUTTON" = "yes"; then
- cat >> confdefs.h <<\EOF
-#define wxUSE_BMPBUTTON 1
-EOF
-
+ USES_CONTROLS=1
fi
if test "$wxUSE_CHECKBOX" = "yes"; then
#define wxUSE_CHECKBOX 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_CHECKLST" = "yes"; then
#define wxUSE_CHECKLISTBOX 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS checklst"
fi
#define wxUSE_GAUGE 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_NEW_GRID" = "yes"; then
#define wxUSE_NEW_GRID 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS newgrid"
fi
#define wxUSE_GRID 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS grid"
fi
#define wxUSE_LISTBOX 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_LISTCTRL" = "yes"; then
#define wxUSE_LISTCTRL 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS listctrl"
else
echo "configure: warning: wxListCtrl requires wxImageList and won't be compiled without it" 1>&2
#define wxUSE_NOTEBOOK 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS notebook"
fi
#define wxUSE_RADIOBOX 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_RADIOBTN" = "yes"; then
#define wxUSE_RADIOBTN 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_SASH" = "yes"; then
#define wxUSE_SCROLLBAR 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS scroll scrollsub"
fi
#define wxUSE_SLIDER 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_SPINBTN" = "yes"; then
#define wxUSE_SPINBTN 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_SPINCTRL" = "yes"; then
#define wxUSE_SPINCTRL 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_SPLITTER" = "yes"; then
#define wxUSE_STATBMP 1
EOF
+ USES_CONTROLS=1
fi
if test "$wxUSE_STATBOX" = "yes"; then
#define wxUSE_STATBOX 1
EOF
+ USES_CONTROLS=1
+fi
+
+if test "$wxUSE_STATTEXT" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_STATTEXT 1
+EOF
+
+ USES_CONTROLS=1
fi
if test "$wxUSE_STATLINE" = "yes"; then
#define wxUSE_STATLINE 1
EOF
+ USES_CONTROLS=1
fi
fi
#define wxUSE_STATUSBAR 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS statbar"
fi
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS tab"
fi
+if test "$wxUSE_TEXTCTRL" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_TEXTCTRL 1
+EOF
+
+ USES_CONTROLS=1
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS text"
+fi
+
+if test "$wxUSE_TOGGLEBTN" = "yes"; then
+ if test "$wxUSE_MAC" = 1; then
+ echo "configure: warning: Toggle button is not yet supported under Mac OS X" 1>&2
+ wxUSE_TOGGLEBTN=no
+ fi
+
+ if test "$wxUSE_TOGGLEBTN" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_TOGGLEBTN 1
+EOF
+
+ USES_CONTROLS=1
+ fi
+fi
+
if test "$wxUSE_TOOLBAR_SIMPLE" = "yes"; then
cat >> confdefs.h <<\EOF
#define wxUSE_TOOLBAR_SIMPLE 1
EOF
wxUSE_TOOLBAR="yes"
+ USES_CONTROLS=1
fi
if test "$wxUSE_TOOLBAR" = "yes"; then
#define wxUSE_TOOLBAR 1
EOF
+ USES_CONTROLS=1
if test "$wxUSE_TOOLBAR_SIMPLE" != "yes"; then
wxUSE_TOOLBAR_NATIVE="yes"
fi
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS toolbar"
-fi
-
-if test "$wxUSE_TOOLBAR_NATIVE" = "yes"; then
- cat >> confdefs.h <<\EOF
+ if test "$wxUSE_TOOLBAR_NATIVE" = "yes"; then
+ cat >> confdefs.h <<\EOF
#define wxUSE_TOOLBAR_NATIVE 1
EOF
+ USES_CONTROLS=1
+ fi
+
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS toolbar"
fi
if test "$wxUSE_TOOLTIPS" = "yes"; then
#define wxUSE_TREECTRL 1
EOF
+ USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS treectrl"
else
echo "configure: warning: wxTreeCtrl requires wxImageList and won't be compiled without it" 1>&2
fi
fi
-
-
-if test "$wxUSE_METAFILE" = "yes"; then
+if test "$USES_CONTROLS" = 1; then
cat >> confdefs.h <<\EOF
-#define wxUSE_METAFILE 1
+#define wxUSE_CONTROLS 1
EOF
fi
-if test "$wxUSE_DIRDLG" = "yes"; then
- if test "$wxUSE_CONSTRAINTS" != "yes"; then
- echo "configure: warning: wxDirDialog requires constraints so it won't be compiled without them" 1>&2
- else
- if test "$wxUSE_TREECTRL" != "yes"; then
- echo "configure: warning: wxDirDialog requires wxTreeCtrl so it won't be compiled without it" 1>&2
- else
- cat >> confdefs.h <<\EOF
-#define wxUSE_DIRDLG 1
-EOF
- fi
- fi
-fi
-if test "$wxUSE_TEXTDLG" = "yes"; then
+if test "$wxUSE_MENUS" = "yes"; then
cat >> confdefs.h <<\EOF
-#define wxUSE_TEXTDLG 1
+#define wxUSE_MENUS 1
EOF
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS menu"
fi
-if test "$wxUSE_STARTUP_TIPS" = "yes"; then
- if test "$wxUSE_CONSTRAINTS" != "yes"; then
- echo "configure: warning: Startup tips requires constraints and won't be compiled without them" 1>&2
- else
- cat >> confdefs.h <<\EOF
-#define wxUSE_STARTUP_TIPS 1
+if test "$wxUSE_METAFILE" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_METAFILE 1
EOF
- fi
fi
-if test "$wxUSE_PROGRESSDLG" = "yes"; then
- if test "$wxUSE_CONSTRAINTS" != "yes"; then
- echo "configure: warning: wxProgressDialog requires constraints so it won't be compiled without them" 1>&2
- else
- cat >> confdefs.h <<\EOF
-#define wxUSE_PROGRESSDLG 1
+if test "$wxUSE_MIMETYPE" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_MIMETYPE 1
EOF
- fi
fi
if test "$wxUSE_MINIFRAME" = "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS validate"
fi
+if test "$wxUSE_IMAGE" = "yes" ; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_IMAGE 1
+EOF
+
+fi
+
if test "$wxUSE_GIF" = "yes" ; then
cat >> confdefs.h <<\EOF
#define wxUSE_GIF 1
fi
+if test "$wxUSE_XPM" = "yes" ; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_XPM 1
+EOF
+
+fi
+
+
+if test "$wxUSE_CHOICEDLG" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_CHOICEDLG 1
+EOF
+
+fi
+
+if test "$wxUSE_COLOURDLG" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_COLOURDLG 1
+EOF
+
+fi
+
+if test "$wxUSE_FILEDLG" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_FILEDLG 1
+EOF
+
+fi
+
+if test "$wxUSE_FONTDLG" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_FONTDLG 1
+EOF
+
+fi
+
+if test "$wxUSE_DIRDLG" = "yes"; then
+ if test "$wxUSE_CONSTRAINTS" != "yes"; then
+ echo "configure: warning: wxDirDialog requires constraints so it won't be compiled without them" 1>&2
+ else
+ if test "$wxUSE_TREECTRL" != "yes"; then
+ echo "configure: warning: wxDirDialog requires wxTreeCtrl so it won't be compiled without it" 1>&2
+ else
+ cat >> confdefs.h <<\EOF
+#define wxUSE_DIRDLG 1
+EOF
+
+ fi
+ fi
+fi
+
+if test "$wxUSE_MSGDLG" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_MSGDLG 1
+EOF
+
+fi
+
+if test "$wxUSE_NUMBERDLG" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_NUMBERDLG 1
+EOF
+
+fi
+
+if test "$wxUSE_PROGRESSDLG" = "yes"; then
+ if test "$wxUSE_CONSTRAINTS" != "yes"; then
+ echo "configure: warning: wxProgressDialog requires constraints so it won't be compiled without them" 1>&2
+ else
+ cat >> confdefs.h <<\EOF
+#define wxUSE_PROGRESSDLG 1
+EOF
+
+ fi
+fi
+
+if test "$wxUSE_STARTUP_TIPS" = "yes"; then
+ if test "$wxUSE_CONSTRAINTS" != "yes"; then
+ echo "configure: warning: Startup tips requires constraints and won't be compiled without them" 1>&2
+ else
+ cat >> confdefs.h <<\EOF
+#define wxUSE_STARTUP_TIPS 1
+EOF
+
+ fi
+fi
+
+if test "$wxUSE_TEXTDLG" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_TEXTDLG 1
+EOF
+
+fi
+
if test "$cross_compiling" = "yes"; then
OSINFO="\"$host\""
-GUILIBS="$GUI_TK_LIBRARY $OPENGL_LINK $TOOLKIT_LINK"
+GUILIBS="$GUI_TK_LIBRARY $TOOLKIT_LINK"
+OPENGL_LIBS="$OPENGL_LINK"
-EXTRA_LIBS="$LIBS $ZLIB_LINK $POSIX4_LINK $INET_LINK $WCHAR_LINK $THREADS_LINK $DMALLOC_LINK $DL_LINK"
+EXTRA_LIBS="$LIBS $POSIX4_LINK $INET_LINK $WCHAR_LINK $THREADS_LINK $DMALLOC_LINK $DL_LINK $ZLIB_LINK -lm"
+if test "$USE_MAC" = 1 ; then
+ EXTRA_LIBS="$EXTRA_LIBS -framework Carbon -framework System"
+fi
if test "$wxUSE_GUI" = "yes"; then
- EXTRA_LIBS="$EXTRA_LIBS $GUILIBS $PNG_LINK $JPEG_LINK $TIFF_LINK"
+ EXTRA_LIBS="$GUILIBS $PNG_LINK $JPEG_LINK $TIFF_LINK $FREETYPE_LINK $EXTRA_LIBS"
fi
LD_LIBS="\${top_builddir}/lib/${WX_LIBRARY_NAME_STATIC} $EXTRA_LIBS"
-INCLUDES="-I. -I\${top_builddir}/include -I\${top_srcdir}/include $ZLIB_INCLUDE $PNG_INCLUDE $JPEG_INCLUDE $TIFF_INCLUDE $TOOLKIT_INCLUDE"
+INCLUDES="-I. -I\${top_builddir}/include -I\${top_srcdir}/include $ZLIB_INCLUDE $PNG_INCLUDE $JPEG_INCLUDE $TIFF_INCLUDE $FREETYPE_INCLUDE $TOOLKIT_INCLUDE"
+
+if test "$wxUSE_GTK" = 1; then
+ WXCONFIG_INCLUDE=""
+else
+ WXCONFIG_INCLUDE="$TOOLKIT_INCLUDE"
+fi
if test "$GXX" = yes ; then
CXXWARNINGS="-Wall"
fi
EXTRA_CFLAGS="$WXDEBUG $WXODBCFLAG $PROFILE $OPTIMISE $INCLUDES"
-CFLAGS=`echo $CFLAGS $EXTRA_CFLAGS | sed 's/ \\+/ /g'`
+CFLAGS=`echo $CFLAGS $EXTRA_CFLAGS $CXXWARNINGS | sed 's/ \\+/ /g'`
CXXFLAGS=`echo $CXXFLAGS $EXTRA_CFLAGS $CXXWARNINGS | sed 's/ \+/ /g'`
LDFLAGS="$LDFLAGS $PROFILE"
if test "$wxUSE_GUI" = "yes"; then
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS controls dialogs dragimag drawing dynamic \
- font fractal image menu minimal richedit"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS controls dialogs dragimag \
+ drawing dynamic event font fractal image \
+ minimal richedit widgets"
+
+ if test "$wxUSE_UNIVERSAL" = "yes" ; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS univ"
+ fi
CPPFLAGS="$CPPFLAGS \$(EXTRADEFS) \$(APPEXTRADEFS)"
else
+
+
+
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:13967: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:17164: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
if test -d include; then
if test -d include/wx; then
- if test -d include/wx/${TOOLKIT_DIR}; then
- if test -f include/wx/${TOOLKIT_DIR}/setup.h; then
- mv -f include/wx/${TOOLKIT_DIR}/setup.h setup.h
+ if test -d include/wx/${SETUPH_DIR}; then
+ if test -f include/wx/${SETUPH_DIR}/setup.h; then
+ mv -f include/wx/${SETUPH_DIR}/setup.h setup.h
fi
fi
fi
fi
-
+
if test "$wxUSE_GUI" = "yes"; then
wx_cv_program_ext=$PROGRAM_EXT
wx_cv_target_library=$WX_TARGET_LIBRARY
wx_cv_target_libtype=$WX_TARGET_LIBRARY_TYPE
+ export wx_cv_path_samplesubdirs wx_cv_path_ifs wx_cv_program_ext \
+ wx_cv_target_library wx_cv_target_libtype
subdirs="demos samples utils contrib"
fi
s%@LEX@%$LEX%g
s%@LEXLIB@%$LEXLIB%g
s%@LN_S@%$LN_S%g
+s%@GTK_CONFIG_2_0@%$GTK_CONFIG_2_0%g
s%@GTK_CONFIG@%$GTK_CONFIG%g
s%@GTK_CFLAGS@%$GTK_CFLAGS%g
s%@GTK_LIBS@%$GTK_LIBS%g
s%@X_PRE_LIBS@%$X_PRE_LIBS%g
s%@X_LIBS@%$X_LIBS%g
s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
+s%@REZ@%$REZ%g
+s%@DEREZ@%$DEREZ%g
s%@LEX_STEM@%$LEX_STEM%g
s%@PATH_IFS@%$PATH_IFS%g
s%@WX_MAJOR_VERSION_NUMBER@%$WX_MAJOR_VERSION_NUMBER%g
s%@PIC_FLAG@%$PIC_FLAG%g
s%@DEP_INFO_FLAGS@%$DEP_INFO_FLAGS%g
s%@CODE_GEN_FLAGS@%$CODE_GEN_FLAGS%g
+s%@CODE_GEN_FLAGS_CXX@%$CODE_GEN_FLAGS_CXX%g
s%@BURNT_LIBRARY_NAME@%$BURNT_LIBRARY_NAME%g
s%@BURNT_LIBRARY_NAME_GL@%$BURNT_LIBRARY_NAME_GL%g
+s%@WX_TARGET_LIBRARY_SONAME@%$WX_TARGET_LIBRARY_SONAME%g
s%@WX_TARGET_LIBRARY_TYPE@%$WX_TARGET_LIBRARY_TYPE%g
s%@WXDEBUG_DEFINE@%$WXDEBUG_DEFINE%g
s%@USE_GUI@%$USE_GUI%g
s%@AFMINSTALL@%$AFMINSTALL%g
+s%@SETUPH_DIR@%$SETUPH_DIR%g
s%@TOOLKIT@%$TOOLKIT%g
s%@TOOLKIT_DEF@%$TOOLKIT_DEF%g
s%@TOOLKIT_DIR@%$TOOLKIT_DIR%g
+s%@TOOLKIT_NAME@%$TOOLKIT_NAME%g
s%@TOOLKIT_INCLUDE@%$TOOLKIT_INCLUDE%g
-s%@GUIHEADERS@%$GUIHEADERS%g
-s%@GUIOBJS@%$GUIOBJS%g
-s%@COMMONOBJS@%$COMMONOBJS%g
-s%@GENERICOBJS@%$GENERICOBJS%g
-s%@GUIDEPS@%$GUIDEPS%g
-s%@COMMONDEPS@%$COMMONDEPS%g
-s%@GENERICDEPS@%$GENERICDEPS%g
-s%@IODBCOBJS@%$IODBCOBJS%g
-s%@UNIXOBJS@%$UNIXOBJS%g
-s%@UNIXDEPS@%$UNIXDEPS%g
+s%@TOOLKIT_VPATH@%$TOOLKIT_VPATH%g
+s%@WXCONFIG_INCLUDE@%$WXCONFIG_INCLUDE%g
s%@ALL_OBJECTS@%$ALL_OBJECTS%g
s%@ALL_DEPFILES@%$ALL_DEPFILES%g
s%@GUIDIST@%$GUIDIST%g
s%@SAMPLES_SUBDIRS@%$SAMPLES_SUBDIRS%g
s%@USER_SUBDIRS@%$USER_SUBDIRS%g
s%@EXTRA_LIBS@%$EXTRA_LIBS%g
+s%@OPENGL_LIBS@%$OPENGL_LIBS%g
s%@EXTRADEFS@%$EXTRADEFS%g
s%@LD_LIBS@%$LD_LIBS%g
s%@RCINPUTSWITCH@%$RCINPUTSWITCH%g
s%@RESPROGRAM@%$RESPROGRAM%g
s%@RESCOMP@%$RESCOMP%g
s%@RESFLAGS@%$RESFLAGS%g
+s%@REZFLAGS@%$REZFLAGS%g
+s%@DEREZFLAGS@%$DEREZFLAGS%g
+s%@LIBWXMACRES@%$LIBWXMACRES%g
+s%@LIBWXMACRESCOMP@%$LIBWXMACRESCOMP%g
s%@DLLTOOL@%$DLLTOOL%g
s%@AS@%$AS%g
s%@NM@%$NM%g
EOF
cat >> $CONFIG_STATUS <<EOF
- TOOLKIT_DIR="${TOOLKIT_DIR}"
+ SETUPH_DIR="${SETUPH_DIR}"
+ TOOLKIT_NAME="${TOOLKIT_NAME}"
LN_S="${LN_S}"
EOF
cat >> $CONFIG_STATUS <<\EOF
- chmod +x wx-config
- mv wx-config wx${TOOLKIT_DIR}-config
- ${LN_S} wx${TOOLKIT_DIR}-config wx-config
-
-
+ if test ! -f wx${TOOLKIT_NAME}-config; then
+ chmod +x wx-config
+ mv wx-config wx${TOOLKIT_NAME}-config
+ ${LN_S} wx${TOOLKIT_NAME}-config wx-config
+ fi
+
+
if test ! -d lib; then
mkdir lib
fi
if test ! -d lib/wx/include/wx; then
mkdir lib/wx/include/wx
fi
- if test ! -d lib/wx/include/wx/${TOOLKIT_DIR}; then
- mkdir lib/wx/include/wx/${TOOLKIT_DIR}
+ if test ! -d lib/wx/include/wx/${TOOLKIT_NAME}; then
+ mkdir lib/wx/include/wx/${TOOLKIT_NAME}
fi
if test -f setup.h; then
- cp -f setup.h lib/wx/include/wx/${TOOLKIT_DIR}/setup.h
+ cp -fp setup.h lib/wx/include/wx/${TOOLKIT_NAME}/setup.h
fi
if test ! -d include/wx; then
mkdir include/wx
fi
- if test ! -d include/wx/${TOOLKIT_DIR}; then
- mkdir include/wx/${TOOLKIT_DIR}
+ if test ! -d include/wx/${SETUPH_DIR}; then
+ mkdir include/wx/${SETUPH_DIR}
fi
if test -f setup.h; then
- mv -f setup.h include/wx/${TOOLKIT_DIR}/setup.h
+ cp -fp setup.h include/wx/${SETUPH_DIR}/setup.h
fi
-
+
exit 0
EOF
projects / wxWidgets.git / blobdiff