-/*!
-
- @page xrc_overview XML-based resource system overview
-
- Classes: #wxXmlResource, #wxXmlResourceHandler
- The XML-based resource system, known as XRC, allows user interface elements such as
- dialogs, menu bars and toolbars, to be stored in text files and loaded into
- the application at run-time. XRC files can also be compiled into binary XRS files or C++
- code (the former makes it possible to store all resources in a single file and the latter
- is useful when you want to embed the resources into the executable).
- There are several advantages to using XRC resources.
-
-
- Recompiling and linking an application is not necessary if the
- resources change.
- If you use a dialog designer that generates C++ code, it can be hard
- to reintegrate this into existing C++ code. Separation of resources and code
- is a more elegant solution.
- You can choose between different alternative resource files at run time, if necessary.
- The XRC format uses sizers for flexibility, allowing dialogs to be resizable
- and highly portable.
- The XRC format is a wxWidgets standard,
- and can be generated or postprocessed by any program that understands it. As it is based
- on the XML standard, existing XML editors can be used for simple editing purposes.
-
-
- XRC was written by Vaclav Slavik.
- @ref xrcconcepts_overview
- @ref binaryresourcefiles_overview
- @ref embeddedresource_overview
- @ref xrccppsample_overview
- @ref xrcsample_overview
- @ref xrcfileformat_overview
- @ref xrccppheader_overview
- @ref newresourcehandlers_overview
-
-
- @section xrcconcepts XRC concepts
-
- These are the typical steps for using XRC files in your application.
-
-
- Include the appropriate headers: normally "wx/xrc/xmlres.h" will suffice;
- If you are going to use @ref binaryresourcefiles_overview, install
- wxFileSystem archive handler first with @c wxFileSystem::AddHandler(new wxArchiveFSHandler);
- call @c wxXmlResource::Get()-InitAllHandlers() from your wxApp::OnInit function,
- and then call @c wxXmlResource::Get()-Load("myfile.xrc") to load the resource file;
- to create a dialog from a resource, create it using the default constructor, and then
- load it using for example @c wxXmlResource::Get()-LoadDialog(dlg, this, "dlg1");
- set up event tables as usual but use the @c XRCID(str) macro to translate from XRC string names
- to a suitable integer identifier, for example @c EVT_MENU(XRCID("quit"), MyFrame::OnQuit).
-
-
- To create an XRC file, you can use one of the following methods.
-
-
- Create the file by hand;
- use #wxDesigner, a commercial dialog designer/RAD tool;
- use #DialogBlocks, a commercial dialog editor;
- use #XRCed, a wxPython-based
- dialog editor that you can find in the @c wxPython/tools subdirectory of the wxWidgets
- CVS archive;
- use #wxGlade, a GUI designer written in wxPython. At the moment it can generate Python, C++ and XRC;
-
-
- A complete list of third-party tools that write to XRC can be found at #www.wxwidgets.org/lnk_tool.htm.
- It is highly recommended that you use a resource editing tool, since it's fiddly writing
- XRC files by hand.
- You can use wxXmlResource::Load in a number of ways.
- You can pass an XRC file (XML-based text resource file)
- or a @ref binaryresourcefiles_overview (extension ZIP or XRS) containing other XRC.
- You can also use @ref embeddedresource_overview
-
- @section binaryresourcefiles Using binary resource files
-
- To compile binary resource files, use the command-line wxrc utility. It takes one or more file parameters
- (the input XRC files) and the following switches and options:
-
-
- -h (--help): show a help message
- -v (--verbose): show verbose logging information
- -c (--cpp-code): write C++ source rather than a XRS file
- -e (--extra-cpp-code): if used together with -c, generates C++ header file
- containing class definitions for the windows defined by the XRC file (see special subsection)
- -u (--uncompressed): do not compress XML files (C++ only)
- -g (--gettext): output underscore-wrapped strings that poEdit or gettext can scan. Outputs to stdout, or a file if -o is used
- -n (--function) name: specify C++ function name (use with -c)
- -o (--output) filename: specify the output file, such as resource.xrs or resource.cpp
- -l (--list-of-handlers) filename: output a list of necessary handlers to this file
-
-
- For example:
-
- @code
- % wxrc resource.xrc
- % wxrc resource.xrc -o resource.xrs
- % wxrc resource.xrc -v -c -o resource.cpp
- @endcode
-
- @b Note
- XRS file is essentially a renamed ZIP archive which means that you can manipulate
- it with standard ZIP tools. Note that if you are using XRS files, you have
- to initialize the #wxFileSystem archive handler first! It is a simple
- thing to do:
-
- @code
- #include wx/filesys.h
- #include wx/fs_arc.h
- ...
- wxFileSystem::AddHandler(new wxArchiveFSHandler);
- @endcode
-
-
- @section embeddedresource Using embedded resources
-
- It is sometimes useful to embed resources in the executable itself instead
- of loading an external file (e.g. when your app is small and consists only of one
- exe file). XRC provides means to convert resources into regular C++ file that
- can be compiled and included in the executable.
- Use the @c -c switch to
- @c wxrc utility to produce C++ file with embedded resources. This file will
- contain a function called @e InitXmlResource (unless you override this with
- a command line switch). Use it to load the resource:
-
- @code
- extern void InitXmlResource(); // defined in generated file
- ...
- wxXmlResource::Get()-InitAllHandlers();
- InitXmlResource();
- ...
- @endcode
-
-
- @section xrccppsample XRC C++ sample
-
- This is the C++ source file (xrcdemo.cpp) for the XRC sample.
-
- @code
- #include "wx/wx.h"
- #include "wx/image.h"
- #include "wx/xrc/xmlres.h"
-
- // the application icon
- #if defined(__WXGTK__) || defined(__WXMOTIF__) || defined(__WXMAC__)
- #include "rc/appicon.xpm"
- #endif
-
- // ----------------------------------------------------------------------------
- // private classes
- // ----------------------------------------------------------------------------
-
- // Define a new application type, each program should derive a class from wxApp
- class MyApp : public wxApp
- {
- public:
- // override base class virtuals
- // ----------------------------
-
- // this one is called on application startup and is a good place for the app
- // initialization (doing it here and not in the ctor allows to have an error
- // return: if OnInit() returns @false, the application terminates)
- virtual bool OnInit();
- };
-
- // Define a new frame type: this is going to be our main frame
- class MyFrame : public wxFrame
- {
- public:
- // ctor(s)
- MyFrame(const wxString& title, const wxPoint& pos, const wxSize& size);
-
- // event handlers (these functions should _not_ be virtual)
- void OnQuit(wxCommandEvent& event);
- void OnAbout(wxCommandEvent& event);
- void OnDlg1(wxCommandEvent& event);
- void OnDlg2(wxCommandEvent& event);
-
- private:
- // any class wishing to process wxWidgets events must use this macro
- DECLARE_EVENT_TABLE()
- };
-
- // ----------------------------------------------------------------------------
- // event tables and other macros for wxWidgets
- // ----------------------------------------------------------------------------
-
- BEGIN_EVENT_TABLE(MyFrame, wxFrame)
- EVT_MENU(XRCID("menu_quit"), MyFrame::OnQuit)
- EVT_MENU(XRCID("menu_about"), MyFrame::OnAbout)
- EVT_MENU(XRCID("menu_dlg1"), MyFrame::OnDlg1)
- EVT_MENU(XRCID("menu_dlg2"), MyFrame::OnDlg2)
- END_EVENT_TABLE()
-
- IMPLEMENT_APP(MyApp)
-
- // ----------------------------------------------------------------------------
- // the application class
- // ----------------------------------------------------------------------------
-
- // 'Main program' equivalent: the program execution "starts" here
- bool MyApp::OnInit()
- {
- wxImage::AddHandler(new wxGIFHandler);
- wxXmlResource::Get()-InitAllHandlers();
- wxXmlResource::Get()-Load("rc/resource.xrc");
-
- MyFrame *frame = new MyFrame("XML resources demo",
- wxPoint(50, 50), wxSize(450, 340));
- frame-Show(@true);
- return @true;
- }
-
- // ----------------------------------------------------------------------------
- // main frame
- // ----------------------------------------------------------------------------
-
- // frame constructor
- MyFrame::MyFrame(const wxString& title, const wxPoint& pos, const wxSize& size)
- : wxFrame((wxFrame *)@NULL, -1, title, pos, size)
- {
- SetIcon(wxICON(appicon));
-
- SetMenuBar(wxXmlResource::Get()-LoadMenuBar("mainmenu"));
- SetToolBar(wxXmlResource::Get()-LoadToolBar(this, "toolbar"));
- }
-
- // event handlers
- void MyFrame::OnQuit(wxCommandEvent& WXUNUSED(event))
- {
- // @true is to force the frame to close
- Close(@true);
- }
-
- void MyFrame::OnAbout(wxCommandEvent& WXUNUSED(event))
- {
- wxString msg;
- msg.Printf( _T("This is the about dialog of XML resources demo.\n")
- _T("Welcome to %s"), wxVERSION_STRING);
-
- wxMessageBox(msg, "About XML resources demo", wxOK | wxICON_INFORMATION, this);
- }
-
- void MyFrame::OnDlg1(wxCommandEvent& WXUNUSED(event))
- {
- wxDialog dlg;
- wxXmlResource::Get()-LoadDialog(, this, "dlg1");
- dlg.ShowModal();
- }
-
- void MyFrame::OnDlg2(wxCommandEvent& WXUNUSED(event))
- {
- wxDialog dlg;
- wxXmlResource::Get()-LoadDialog(, this, "dlg2");
- dlg.ShowModal();
- }
- @endcode
-
-
- @section xrcsample XRC resource file sample
-
- This is the XML file (resource.xrc) for the XRC sample.
-
- @code
- ?xml version="1.0"?
- resource version="2.3.0.1"
- object class="wxMenuBar" name="mainmenu"
- stylewxMB_DOCKABLE/style
- object class="wxMenu" name="menu_file"
- label_File/label
- stylewxMENU_TEAROFF/style
- object class="wxMenuItem" name="menu_about"
- label_About.../label
- bitmapfilesave.gif/bitmap
- /object
- object class="separator"/
- object class="wxMenuItem" name="menu_dlg1"
- labelDialog 1/label
- /object
- object class="wxMenuItem" name="menu_dlg2"
- labelDialog 2/label
- /object
- object class="separator"/
- object class="wxMenuItem" name="menu_quit"
- labelE_xit\tAlt-X/label
- /object
- /object
- /object
- object class="wxToolBar" name="toolbar"
- stylewxTB_FLAT|wxTB_DOCKABLE/style
- margins2,2/margins
- object class="tool" name="menu_open"
- bitmapfileopen.gif/bitmap
- tooltipOpen catalog/tooltip
- /object
- object class="tool" name="menu_save"
- bitmapfilesave.gif/bitmap
- tooltipSave catalog/tooltip
- /object
- object class="tool" name="menu_update"
- bitmapupdate.gif/bitmap
- tooltipUpdate catalog - synchronize it with sources/tooltip
- /object
- separator/
- object class="tool" name="menu_quotes"
- bitmapquotes.gif/bitmap
- toggle1/toggle
- tooltipDisplay quotes around the string?/tooltip
- /object
- object class="separator"/
- object class="tool" name="menu_fuzzy"
- bitmapfuzzy.gif/bitmap
- tooltipToggled if selected string is fuzzy translation/tooltip
- toggle1/toggle
- /object
- /object
- object class="wxDialog" name="dlg1"
- object class="wxBoxSizer"
- object class="sizeritem"
- object class="wxBitmapButton"
- bitmapfuzzy.gif/bitmap
- focusfileopen.gif/focus
- /object
- /object
- object class="sizeritem"
- object class="wxPanel"
- object class="wxStaticText"
- labelfdgdfgdfgdfg/label
- /object
- stylewxBORDER\_SUNKEN/style
- /object
- flagwxALIGN_CENTER/flag
- /object
- object class="sizeritem"
- object class="wxButton"
- labelButtonek/label
- /object
- border10d/border
- flagwxALL/flag
- /object
- object class="sizeritem"
- object class="wxHtmlWindow"
- htmlcodeh1Hi,/h1man/htmlcode
- size100,45d/size
- /object
- /object
- object class="sizeritem"
- object class="wxNotebook"
- object class="notebookpage"
- object class="wxPanel"
- object class="wxBoxSizer"
- object class="sizeritem"
- object class="wxHtmlWindow"
- htmlcodeHello, we are inside a uNOTEBOOK/u.../htmlcode
- size50,50d/size
- /object
- option1/option
- /object
- /object
- /object
- labelPage/label
- /object
- object class="notebookpage"
- object class="wxPanel"
- object class="wxBoxSizer"
- object class="sizeritem"
- object class="wxHtmlWindow"
- htmlcodeHello, we are inside a uNOTEBOOK/u.../htmlcode
- size50,50d/size
- /object
- /object
- /object
- /object
- labelPage 2/label
- /object
- usenotebooksizer1/usenotebooksizer
- /object
- flagwxEXPAND/flag
- /object
- orientwxVERTICAL/orient
- /object
- /object
- object class="wxDialog" name="dlg2"
- object class="wxBoxSizer"
- orientwxVERTICAL/orient
- object class="sizeritem" name="dfgdfg"
- object class="wxTextCtrl"
- size200,200d/size
- stylewxTE_MULTILINE|wxBORDER_SUNKEN/style
- valueHello, this is an ordinary multiline\n textctrl..../value
- /object
- option1/option
- flagwxEXPAND|wxALL/flag
- border10/border
- /object
- object class="sizeritem"
- object class="wxBoxSizer"
- object class="sizeritem"
- object class="wxButton" name="wxID_OK"
- labelOk/label
- default1/default
- /object
- /object
- object class="sizeritem"
- object class="wxButton" name="wxID_CANCEL"
- labelCancel/label
- /object
- border10/border
- flagwxLEFT/flag
- /object
- /object
- flagwxLEFT|wxRIGHT|wxBOTTOM|wxALIGN_RIGHT/flag
- border10/border
- /object
- /object
- titleSecond testing dialog/title
- /object
- /resource
- @endcode
-
-
- @section xrcfileformat XRC file format
-
- Please see Technical Note 14 (docs/tech/tn0014.txt) in your wxWidgets
- distribution.
-
- @section xrccppheader C++ header file generation
-
- Using the @c -e switch together with @c -c, a C++ header file is written
- containing class definitions for the GUI windows defined in the XRC file.
- This code generation can make it easier to use XRC and automate program
- development.
- The classes can be used as basis for development, freeing the
- programmer from dealing with most of the XRC specifics (e.g. @c XRCCTRL).
- For each top level window defined in the XRC file a C++ class definition is
- generated, containing as class members the named widgets of the window.
- A default constructor for each class is also generated. Inside the constructor
- all XRC loading is done and all class members representing widgets are initialized.
- A simple example will help understand how the scheme works. Suppose you have
- a XRC file defining a top level window @c TestWnd_Base, which subclasses @c wxFrame (any
- other class like @c wxDialog will do also), and has subwidgets @c wxTextCtrl A and @c wxButton B.
- The XRC file and corresponding class definition in the header file will be something like:
-
- @code
- ?xml version="1.0"?
- resource version="2.3.0.1"
- object class="wxFrame" name="TestWnd_Base"
- size-1,-1/size
- titleTest/title
- object class="wxBoxSizer"
- orientwxHORIZONTAL/orient
- object class="sizeritem"
- object class="wxTextCtrl" name="A"
- labelTest label/label
- /object
- /object
- object class="sizeritem"
- object class="wxButton" name="B"
- labelTest button/label
- /object
- /object
- /object
- /object
- /resource
-
-
- class TestWnd_Base : public wxFrame {
- protected:
- wxTextCtrl* A;
- wxButton* B;
-
- private:
- void InitWidgetsFromXRC(){
- wxXmlResource::Get()-LoadObject(this,@NULL,"TestWnd","wxFrame");
- A = XRCCTRL(*this,"A",wxTextCtrl);
- B = XRCCTRL(*this,"B",wxButton);
- }
- public:
- TestWnd::TestWnd(){
- InitWidgetsFromXRC();
- }
- };
- @endcode
-
- The generated window class can be used as basis for the full window class. The
- class members which represent widgets may be accessed by name instead of using
- @c XRCCTRL every time you wish to reference them (note that they are @c protected class members),
- though you must still use @c XRCID to refer to widget IDs in the event
- table.
- Example:
-
- @code
- #include "resource.h"
-
- class TestWnd : public TestWnd_Base {
- public:
- TestWnd(){
- // A, B already initialised at this point
- A-SetValue("Updated in TestWnd::TestWnd");
- B-SetValue("Nice :)");
- }
- void OnBPressed(wxEvent& event){
- Close();
- }
- DECLARE_EVENT_TABLE();
- };
-
- BEGIN_EVENT_TABLE(TestWnd,TestWnd_Base)
- EVT_BUTTON(XRCID("B"),TestWnd::OnBPressed)
- END_EVENT_TABLE()
- @endcode
-
- It is also possible to access the wxSizerItem of a sizer that is part of
- a resource. This can be done using @c XRCSIZERITEM as shown. The
- resource file can have something like this for a sizer item.
-
- @code
- object class="spacer" name="area"
- size400, 300/size
- /object
- @endcode
-
- The code can then access the sizer item by using @c XRCSIZERITEM and
- @c XRCID together.
-
- @code
- wxSizerItem* item = XRCSIZERITEM(*this, "area");
- @endcode
-
-
- @section newresourcehandlers Adding new resource handlers
-
- Adding a new resource handler is pretty easy.
- Typically, to add an handler for the @c MyControl class, you'll want to create
- the @c xh_mycontrol.h @c xh_mycontrol.cpp files.
- The header needs to contains the @c MyControlXmlHandler class definition:
-
- @code
- class MyControlXmlHandler : public wxXmlResourceHandler
- {
- public:
-
- // Constructor.
- MyControlXmlHandler();
-
- // Creates the control and returns a pointer to it.
- virtual wxObject *DoCreateResource();
-
- // Returns @true if we know how to create a control for the given node.
- virtual bool CanHandle(wxXmlNode *node);
-
- // Register with wxWidgets' dynamic class subsystem.
- DECLARE_DYNAMIC_CLASS(MyControlXmlHandler)
- };
- @endcode
-
- The implementation of your custom XML handler will typically look as:
-
- @code
- // Register with wxWidgets' dynamic class subsystem.
- IMPLEMENT_DYNAMIC_CLASS(MyControlXmlHandler, wxXmlResourceHandler)
-
- MyControlXmlHandler::MyControlXmlHandler()
- {
- // this call adds support for all wxWindows class styles
- // (e.g. wxBORDER_SIMPLE, wxBORDER_SUNKEN, wxWS_EX_* etc etc)
- AddWindowStyles();
-
- // if MyControl class supports e.g. MYCONTROL_DEFAULT_STYLE
- // you should use:
- // XRC_ADD_STYLE(MYCONTROL_DEFAULT_STYLE);
- }
-
- wxObject *MyControlXmlHandler::DoCreateResource()
- {
- // the following macro will init a pointer named "control"
- // with a new instance of the MyControl class, but will NOT
- // Create() it!
- XRC_MAKE_INSTANCE(control, MyControl)
-
- // this is the point where you'll typically need to do the most
- // important changes: here the control is created and initialized.
- // You'll want to use the wxXmlResourceHandler's getters to
- // do most of your work.
- // If e.g. the MyControl::Create function looks like:
- //
- // bool MyControl::Create(wxWindow *parent, int id,
- // const wxBitmap , const wxPoint ,
- // const wxBitmap , const wxPoint ,
- // const wxString , const wxFont ,
- // const wxPoint , const wxSize ,
- // long style = MYCONTROL_DEFAULT_STYLE,
- // const wxString = wxT("MyControl"));
- //
- // then the XRC for your component should look like:
- //
- // object class="MyControl" name="some_name"
- // first-bitmapfirst.xpm/first-bitmap
- // second-bitmaptext.xpm/second-bitmap
- // first-pos3,3/first-pos
- // second-pos4,4/second-pos
- // the-titlea title/the-title
- // title-font
- // !-- the standard XRC tags for describing a font: size, style, weight, etc --
- // /title-font
- // !-- XRC also accepts other usual tags for wxWindow-derived classes:
- // like e.g. name, style, size, position, etc --
- // /object
- //
- // and the code to read your custom tags from the XRC file is just:
- control-Create(m_parentAsWindow, GetID(),
- GetBitmap(wxT("first-bitmap")),
- GetPosition(wxT("first-pos")),
- GetBitmap(wxT("second-bitmap")),
- GetPosition(wxT("second-pos")),
- GetText(wxT("the-title")),
- GetFont(wxT("title-font")),
- GetPosition(), GetSize(), GetStyle(), GetName());
-
- SetupWindow(control);
-
- return control;
- }
-
- bool MyControlXmlHandler::CanHandle(wxXmlNode *node)
- {
- // this function tells XRC system that this handler can parse
- // the object class="MyControl" tags
- return IsOfClass(node, wxT("MyControl"));
- }
- @endcode
-
- You may want to check the #wxXmlResourceHandler documentation
- to see how many built-in getters it contains. It's very easy to retrieve also complex structures
- out of XRC files using them.
-
- */
-
+/**
+
+@page overview_xrc XML Based Resource System (XRC)
+
+Classes: wxXmlResource, wxXmlResourceHandler
+
+The XML-based resource system, known as XRC, allows user interface elements
+such as dialogs, menu bars and toolbars, to be stored in text files and loaded
+into the application at run-time. XRC files can also be compiled into binary
+XRS files or C++ code (the former makes it possible to store all resources in a
+single file and the latter is useful when you want to embed the resources into
+the executable).
+
+There are several advantages to using XRC resources:
+
+@li Recompiling and linking an application is not necessary if the resources
+ change.
+@li If you use a dialog designer that generates C++ code, it can be hard to
+ reintegrate this into existing C++ code. Separation of resources and code
+ is a more elegant solution.
+@li You can choose between different alternative resource files at run time, if
+ necessary.
+@li The XRC format uses sizers for flexibility, allowing dialogs to be
+ resizable and highly portable.
+@li The XRC format is a wxWidgets standard, and can be generated or
+ postprocessed by any program that understands it. As it is basedon the XML
+ standard, existing XML editors can be used for simple editing purposes.
+
+XRC was written by Vaclav Slavik.
+
+@li @ref overview_xrc_concepts
+@li @ref overview_xrc_binaryresourcefiles
+@li @ref overview_xrc_embeddedresource
+@li @ref overview_xrc_cppsample
+@li @ref overview_xrc_sample
+@li @ref overview_xrc_cppheader
+@li @ref overview_xrc_newresourcehandlers
+@li @ref xrc_format
+
+<hr>
+
+
+@section overview_xrc_concepts XRC Concepts
+
+These are the typical steps for using XRC files in your application.
+
+@li Include the appropriate headers: normally "wx/xrc/xmlres.h" will suffice.
+@li If you are going to use XRS files (see
+ @ref overview_xrc_binaryresourcefiles), install wxFileSystem archive
+ handler first with wxFileSystem::AddHandler(new wxArchiveFSHandler);
+@li Call wxXmlResource::Get()->InitAllHandlers() from your wxApp::OnInit
+ function, and then call wxXmlResource::Get()->Load("myfile.xrc") to load
+ the resource file.
+@li To create a dialog from a resource, create it using the default
+ constructor, and then load it. For example:
+ wxXmlResource::Get()->LoadDialog(dlg, this, "dlg1");
+@li Set up event tables as usual but use the XRCID(str) macro to translate from
+ XRC string names to a suitable integer identifier, for example
+ <tt>EVT_MENU(XRCID("quit"), MyFrame::OnQuit)</tt>.
+
+To create an XRC file, you can use one of the following methods.
+
+@li Create the file by hand.
+@li Use wxDesigner <http://www.roebling.de/>, a commercial dialog designer/RAD
+ tool.
+@li Use DialogBlocks <http://www.anthemion.co.uk/dialogblocks/>, a commercial
+ dialog editor.
+@li Use XRCed <http://xrced.sf.net/>, a wxPython-based dialog editor that you
+ can find in the wxPython/tools subdirectory of the wxWidgets SVN archive.
+@li Use wxGlade <http://wxglade.sf.net/>, a GUI designer written in wxPython.
+ At the moment it can generate Python, C++ and XRC.
+
+A complete list of third-party tools that write to XRC can be found at
+<http://www.wxwidgets.org/wiki/index.php/Tools>.
+
+It is highly recommended that you use a resource editing tool, since it's
+fiddly writing XRC files by hand.
+
+You can use wxXmlResource::Load in a number of ways. You can pass an XRC file
+(XML-based text resource file) or a zip-compressed file (see
+@ref overview_xrc_binaryresourcefiles), with extension ZIP or XRS, containing
+other XRC.
+
+You can also use embedded C++ resources (see
+@ref overview_xrc_embeddedresource).
+
+
+@section overview_xrc_binaryresourcefiles Using Binary Resource Files
+
+To compile binary resource files, use the command-line @c wxrc utility. It
+takes one or more file parameters (the input XRC files) and the following
+switches and options:
+
+@li -h (--help): Show a help message.
+@li -v (--verbose): Show verbose logging information.
+@li -c (--cpp-code): Write C++ source rather than a XRS file.
+@li -e (--extra-cpp-code): If used together with -c, generates C++ header file
+ containing class definitions for the windows defined by the XRC file (see
+ special subsection).
+@li -u (--uncompressed): Do not compress XML files (C++ only).
+@li -g (--gettext): Output underscore-wrapped strings that poEdit or gettext
+ can scan. Outputs to stdout, or a file if -o is used.
+@li -n (--function) @<name@>: Specify C++ function name (use with -c).
+@li -o (--output) @<filename@>: Specify the output file, such as resource.xrs
+ or resource.cpp.
+@li -l (--list-of-handlers) @<filename@>: Output a list of necessary handlers
+ to this file.
+
+For example:
+
+@code
+$ wxrc resource.xrc
+$ wxrc resource.xrc -o resource.xrs
+$ wxrc resource.xrc -v -c -o resource.cpp
+@endcode
+
+@note XRS file is essentially a renamed ZIP archive which means that you can
+manipulate it with standard ZIP tools. Note that if you are using XRS files,
+you have to initialize the wxFileSystem archive handler first! It is a simple
+thing to do:
+
+@code
+#include <wx/filesys.h>
+#include <wx/fs_arc.h>
+...
+wxFileSystem::AddHandler(new wxArchiveFSHandler);
+@endcode
+
+
+@section overview_xrc_embeddedresource Using Embedded Resources
+
+It is sometimes useful to embed resources in the executable itself instead of
+loading an external file (e.g. when your app is small and consists only of one
+exe file). XRC provides means to convert resources into regular C++ file that
+can be compiled and included in the executable.
+
+Use the @c -c switch to @c wxrc utility to produce C++ file with embedded
+resources. This file will contain a function called @c InitXmlResource (unless
+you override this with a command line switch). Use it to load the resource:
+
+@code
+extern void InitXmlResource(); // defined in generated file
+...
+wxXmlResource::Get()->InitAllHandlers();
+InitXmlResource();
+...
+@endcode
+
+
+@section overview_xrc_cppsample XRC C++ Sample
+
+This is the C++ source file (xrcdemo.cpp) for the XRC sample.
+
+@code
+#include "wx/wx.h"
+#include "wx/image.h"
+#include "wx/xrc/xmlres.h"
+
+// the application icon
+#if defined(__WXGTK__) || defined(__WXMOTIF__) || defined(__WXMAC__)
+ #include "rc/appicon.xpm"
+#endif
+
+// ----------------------------------------------------------------------------
+// private classes
+// ----------------------------------------------------------------------------
+
+// Define a new application type, each program should derive a class from wxApp
+class MyApp : public wxApp
+{
+public:
+ // override base class virtuals
+ // ----------------------------
+
+ // this one is called on application startup and is a good place for the
+ // app initialization (doing it here and not in the ctor allows to have an
+ // error return: if OnInit() returns false, the application terminates)
+ virtual bool OnInit();
+};
+
+// Define a new frame type: this is going to be our main frame
+class MyFrame : public wxFrame
+{
+public:
+ // ctor(s)
+ MyFrame(const wxString& title, const wxPoint& pos, const wxSize& size);
+
+ // event handlers (these functions should _not_ be virtual)
+ void OnQuit(wxCommandEvent& event);
+ void OnAbout(wxCommandEvent& event);
+ void OnDlg1(wxCommandEvent& event);
+ void OnDlg2(wxCommandEvent& event);
+
+private:
+ // any class wishing to process wxWidgets events must use this macro
+ DECLARE_EVENT_TABLE()
+};
+
+// ----------------------------------------------------------------------------
+// event tables and other macros for wxWidgets
+// ----------------------------------------------------------------------------
+
+BEGIN_EVENT_TABLE(MyFrame, wxFrame)
+ EVT_MENU(XRCID("menu_quit"), MyFrame::OnQuit)
+ EVT_MENU(XRCID("menu_about"), MyFrame::OnAbout)
+ EVT_MENU(XRCID("menu_dlg1"), MyFrame::OnDlg1)
+ EVT_MENU(XRCID("menu_dlg2"), MyFrame::OnDlg2)
+END_EVENT_TABLE()
+
+IMPLEMENT_APP(MyApp)
+
+// ----------------------------------------------------------------------------
+// the application class
+// ----------------------------------------------------------------------------
+
+// 'Main program' equivalent: the program execution "starts" here
+bool MyApp::OnInit()
+{
+ wxImage::AddHandler(new wxGIFHandler);
+ wxXmlResource::Get()->InitAllHandlers();
+ wxXmlResource::Get()->Load("rc/resource.xrc");
+
+ MyFrame *frame = new MyFrame("XML resources demo",
+ wxPoint(50, 50), wxSize(450, 340));
+ frame->Show(true);
+ return true;
+}
+
+// ----------------------------------------------------------------------------
+// main frame
+// ----------------------------------------------------------------------------
+
+// frame constructor
+MyFrame::MyFrame(const wxString& title, const wxPoint& pos, const wxSize& size)
+: wxFrame((wxFrame *)NULL, -1, title, pos, size)
+{
+ SetIcon(wxICON(appicon));
+
+ SetMenuBar(wxXmlResource::Get()->LoadMenuBar("mainmenu"));
+ SetToolBar(wxXmlResource::Get()->LoadToolBar(this, "toolbar"));
+}
+
+// event handlers
+void MyFrame::OnQuit(wxCommandEvent& WXUNUSED(event))
+{
+ // true is to force the frame to close
+ Close(true);
+}
+
+void MyFrame::OnAbout(wxCommandEvent& WXUNUSED(event))
+{
+ wxString msg;
+ msg.Printf( _T("This is the about dialog of XML resources demo.\n")
+ _T("Welcome to %s"), wxVERSION_STRING);
+
+ wxMessageBox(msg, "About XML resources demo",
+ wxOK | wxICON_INFORMATION, this);
+}
+
+void MyFrame::OnDlg1(wxCommandEvent& WXUNUSED(event))
+{
+ wxDialog dlg;
+ wxXmlResource::Get()->LoadDialog(&dlg, this, "dlg1");
+ dlg.ShowModal();
+}
+
+void MyFrame::OnDlg2(wxCommandEvent& WXUNUSED(event))
+{
+ wxDialog dlg;
+ wxXmlResource::Get()->LoadDialog(&dlg, this, "dlg2");
+ dlg.ShowModal();
+}
+@endcode
+
+
+@section overview_xrc_sample XRC Resource File Sample
+
+This is the XML file (resource.xrc) for the XRC sample.
+
+@code
+<?xml version="1.0"?>
+<resource version="2.3.0.1">
+ <object class="wxMenuBar" name="mainmenu">
+ <style>wxMB_DOCKABLE</style>
+ <object class="wxMenu" name="menu_file">
+ <label>_File</label>
+ <style>wxMENU_TEAROFF</style>
+ <object class="wxMenuItem" name="menu_about">
+ <label>_About...</label>
+ <bitmap>filesave.gif</bitmap>
+ </object>
+ <object class="separator"/>
+ <object class="wxMenuItem" name="menu_dlg1">
+ <label>Dialog 1</label>
+ </object>
+ <object class="wxMenuItem" name="menu_dlg2">
+ <label>Dialog 2</label>
+ </object>
+ <object class="separator"/>
+ <object class="wxMenuItem" name="menu_quit">
+ <label>E_xit\tAlt-X</label>
+ </object>
+ </object>
+ </object>
+ <object class="wxToolBar" name="toolbar">
+ <style>wxTB_FLAT|wxTB_DOCKABLE</style>
+ <margins>2,2</margins>
+ <object class="tool" name="menu_open">
+ <bitmap>fileopen.gif</bitmap>
+ <tooltip>Open catalog</tooltip>
+ </object>
+ <object class="tool" name="menu_save">
+ <bitmap>filesave.gif</bitmap>
+ <tooltip>Save catalog</tooltip>
+ </object>
+ <object class="tool" name="menu_update">
+ <bitmap>update.gif</bitmap>
+ <tooltip>Update catalog - synchronize it with sources</tooltip>
+ </object>
+ <separator/>
+ <object class="tool" name="menu_quotes">
+ <bitmap>quotes.gif</bitmap>
+ <toggle>1</toggle>
+ <tooltip>Display quotes around the string?</tooltip>
+ </object>
+ <object class="separator"/>
+ <object class="tool" name="menu_fuzzy">
+ <bitmap>fuzzy.gif</bitmap>
+ <tooltip>Toggled if selected string is fuzzy translation</tooltip>
+ <toggle>1</toggle>
+ </object>
+ </object>
+ <object class="wxDialog" name="dlg1">
+ <object class="wxBoxSizer">
+ <object class="sizeritem">
+ <object class="wxBitmapButton">
+ <bitmap>fuzzy.gif</bitmap>
+ <focus>fileopen.gif</focus>
+ </object>
+ </object>
+ <object class="sizeritem">
+ <object class="wxPanel">
+ <object class="wxStaticText">
+ <label>fdgdfgdfgdfg</label>
+ </object>
+ <style>wxBORDER\_SUNKEN</style>
+ </object>
+ <flag>wxALIGN_CENTER</flag>
+ </object>
+ <object class="sizeritem">
+ <object class="wxButton">
+ <label>Buttonek</label>
+ </object>
+ <border>10d</border>
+ <flag>wxALL</flag>
+ </object>
+ <object class="sizeritem">
+ <object class="wxHtmlWindow">
+ <htmlcode><h1>Hi,</h1>man</htmlcode>
+ <size>100,45d</size>
+ </object>
+ </object>
+ <object class="sizeritem">
+ <object class="wxNotebook">
+ <object class="notebookpage">
+ <object class="wxPanel">
+ <object class="wxBoxSizer">
+ <object class="sizeritem">
+ <object class="wxHtmlWindow">
+ <htmlcode>Hello, we are inside a <u>NOTEBOOK</u>...</htmlcode>
+ <size>50,50d</size>
+ </object>
+ <option>1</option>
+ </object>
+ </object>
+ </object>
+ <label>Page</label>
+ </object>
+ <object class="notebookpage">
+ <object class="wxPanel">
+ <object class="wxBoxSizer">
+ <object class="sizeritem">
+ <object class="wxHtmlWindow">
+ <htmlcode>Hello, we are inside a <u>NOTEBOOK</u>...</htmlcode>
+ <size>50,50d</size>
+ </object>
+ </object>
+ </object>
+ </object>
+ <label>Page 2</label>
+ </object>
+ <usenotebooksizer>1</usenotebooksizer>
+ </object>
+ <flag>wxEXPAND</flag>
+ </object>
+ <orient>wxVERTICAL</orient>
+ </object>
+ </object>
+ <object class="wxDialog" name="dlg2">
+ <object class="wxBoxSizer">
+ <orient>wxVERTICAL</orient>
+ <object class="sizeritem" name="dfgdfg">
+ <object class="wxTextCtrl">
+ <size>200,200d</size>
+ <style>wxTE_MULTILINE|wxBORDER_SUNKEN</style>
+ <value>Hello, this is an ordinary multiline\n textctrl....</value>
+ </object>
+ <option>1</option>
+ <flag>wxEXPAND|wxALL</flag>
+ <border>10</border>
+ </object>
+ <object class="sizeritem">
+ <object class="wxBoxSizer">
+ <object class="sizeritem">
+ <object class="wxButton" name="wxID_OK">
+ <label>Ok</label>
+ <default>1</default>
+ </object>
+ </object>
+ <object class="sizeritem">
+ <object class="wxButton" name="wxID_CANCEL">
+ <label>Cancel</label>
+ </object>
+ <border>10</border>
+ <flag>wxLEFT</flag>
+ </object>
+ </object>
+ <flag>wxLEFT|wxRIGHT|wxBOTTOM|wxALIGN_RIGHT</flag>
+ <border>10</border>
+ </object>
+ </object>
+ <title>Second testing dialog</title>
+ </object>
+</resource>
+@endcode
+
+
+@section overview_xrc_cppheader C++ header file generation
+
+Using the @c -e switch together with @c -c, a C++ header file is written
+containing class definitions for the GUI windows defined in the XRC file. This
+code generation can make it easier to use XRC and automate program development.
+The classes can be used as basis for development, freeing the programmer from
+dealing with most of the XRC specifics (e.g. @c XRCCTRL).
+
+For each top level window defined in the XRC file a C++ class definition is
+generated, containing as class members the named widgets of the window. A
+default constructor for each class is also generated. Inside the constructor
+all XRC loading is done and all class members representing widgets are
+initialized.
+
+A simple example will help understand how the scheme works. Suppose you have a
+XRC file defining a top level window @c TestWnd_Base, which subclasses wxFrame
+(any other class like @c wxDialog will do also), and has subwidgets wxTextCtrl A
+and wxButton B.
+
+The XRC file and corresponding class definition in the header file will be
+something like:
+
+@code
+<?xml version="1.0"?>
+<resource version="2.3.0.1">
+ <object class="wxFrame" name="TestWnd_Base">
+ <size>-1,-1</size>
+ <title>Test</title>
+ <object class="wxBoxSizer">
+ <orient>wxHORIZONTAL</orient>
+ <object class="sizeritem">
+ <object class="wxTextCtrl" name="A">
+ <label>Test label</label>
+ </object>
+ </object>
+ <object class="sizeritem">
+ <object class="wxButton" name="B">
+ <label>Test button</label>
+ </object>
+ </object>
+ </object>
+ </object>
+</resource>
+
+
+class TestWnd_Base : public wxFrame
+{
+protected:
+ wxTextCtrl* A;
+ wxButton* B;
+
+private:
+ void InitWidgetsFromXRC()
+ {
+ wxXmlResource::Get()->LoadObject(this, NULL, "TestWnd", "wxFrame");
+ A = XRCCTRL(*this, "A", wxTextCtrl);
+ B = XRCCTRL(*this, "B", wxButton);
+ }
+public:
+ TestWnd::TestWnd()
+ {
+ InitWidgetsFromXRC();
+ }
+};
+@endcode
+
+The generated window class can be used as basis for the full window class. The
+class members which represent widgets may be accessed by name instead of using
+@c XRCCTRL every time you wish to reference them (note that they are
+@c protected class members), though you must still use @c XRCID to refer to
+widget IDs in the event table.
+
+Example:
+
+@code
+#include "resource.h"
+
+class TestWnd : public TestWnd_Base
+{
+public:
+ TestWnd()
+ {
+ // A, B already initialised at this point
+ A->SetValue("Updated in TestWnd::TestWnd");
+ B->SetValue("Nice :)");
+ }
+ void OnBPressed(wxEvent& event)
+ {
+ Close();
+ }
+ DECLARE_EVENT_TABLE();
+};
+
+BEGIN_EVENT_TABLE(TestWnd,TestWnd_Base)
+ EVT_BUTTON(XRCID("B"), TestWnd::OnBPressed)
+END_EVENT_TABLE()
+@endcode
+
+It is also possible to access the wxSizerItem of a sizer that is part of a
+resource. This can be done using @c XRCSIZERITEM as shown.
+
+The resource file can have something like this for a sizer item.
+
+@code
+<object class="spacer" name="area">
+ <size>400, 300</size>
+</object>
+@endcode
+
+The code can then access the sizer item by using @c XRCSIZERITEM and @c XRCID
+together.
+
+@code
+wxSizerItem* item = XRCSIZERITEM(*this, "area");
+@endcode
+
+
+@section overview_xrc_newresourcehandlers Adding New Resource Handlers
+
+Adding a new resource handler is pretty easy.
+
+Typically, to add an handler for the @c MyControl class, you'll want to create
+the @c xh_mycontrol.h and @c xh_mycontrol.cpp files.
+
+The header needs to contains the @c MyControlXmlHandler class definition:
+
+@code
+class MyControlXmlHandler : public wxXmlResourceHandler
+{
+public:
+ // Constructor.
+ MyControlXmlHandler();
+
+ // Creates the control and returns a pointer to it.
+ virtual wxObject *DoCreateResource();
+
+ // Returns true if we know how to create a control for the given node.
+ virtual bool CanHandle(wxXmlNode *node);
+
+ // Register with wxWidgets' dynamic class subsystem.
+ DECLARE_DYNAMIC_CLASS(MyControlXmlHandler)
+};
+@endcode
+
+The implementation of your custom XML handler will typically look as:
+
+@code
+// Register with wxWidgets' dynamic class subsystem.
+IMPLEMENT_DYNAMIC_CLASS(MyControlXmlHandler, wxXmlResourceHandler)
+
+MyControlXmlHandler::MyControlXmlHandler()
+{
+ // this call adds support for all wxWindows class styles
+ // (e.g. wxBORDER_SIMPLE, wxBORDER_SUNKEN, wxWS_EX_* etc etc)
+ AddWindowStyles();
+
+ // if MyControl class supports e.g. MYCONTROL_DEFAULT_STYLE
+ // you should use:
+ // XRC_ADD_STYLE(MYCONTROL_DEFAULT_STYLE);
+}
+
+wxObject *MyControlXmlHandler::DoCreateResource()
+{
+ // the following macro will init a pointer named "control"
+ // with a new instance of the MyControl class, but will NOT
+ // Create() it!
+ XRC_MAKE_INSTANCE(control, MyControl)
+
+ // this is the point where you'll typically need to do the most
+ // important changes: here the control is created and initialized.
+ // You'll want to use the wxXmlResourceHandler's getters to
+ // do most of your work.
+ // If e.g. the MyControl::Create function looks like:
+ //
+ // bool MyControl::Create(wxWindow *parent, int id,
+ // const wxBitmap &first, const wxPoint &posFirst,
+ // const wxBitmap &second, const wxPoint &posSecond,
+ // const wxString &theTitle, const wxFont &titleFont,
+ // const wxPoint &pos, const wxSize &size,
+ // long style = MYCONTROL_DEFAULT_STYLE,
+ // const wxString &name = wxT("MyControl"));
+ //
+ // Then the XRC for your component should look like:
+ //
+ // <object class="MyControl" name="some_name">
+ // <first-bitmap>first.xpm</first-bitmap>
+ // <second-bitmap>text.xpm</second-bitmap>
+ // <first-pos>3,3</first-pos>
+ // <second-pos>4,4</second-pos>
+ // <the-title>a title</the-title>
+ // <title-font>
+ // <!-- Standard XRC tags for a font: <size>, <style>, <weight>, etc -->
+ // </title-font>
+ // <!-- XRC also accepts other usual tags for wxWindow-derived classes:
+ // like e.g. <name>, <style>, <size>, <position>, etc -->
+ // </object>
+ //
+ // And the code to read your custom tags from the XRC file is just:
+ control->Create(m_parentAsWindow, GetID(),
+ GetBitmap(wxT("first-bitmap")),
+ GetPosition(wxT("first-pos")),
+ GetBitmap(wxT("second-bitmap")),
+ GetPosition(wxT("second-pos")),
+ GetText(wxT("the-title")),
+ GetFont(wxT("title-font")),
+ GetPosition(), GetSize(), GetStyle(), GetName());
+
+ SetupWindow(control);
+
+ return control;
+}
+
+bool MyControlXmlHandler::CanHandle(wxXmlNode *node)
+{
+ // this function tells XRC system that this handler can parse
+ // the <object class="MyControl"> tags
+ return IsOfClass(node, wxT("MyControl"));
+}
+@endcode
+
+You may want to check the wxXmlResourceHandler documentation to see how many
+built-in getters it contains. It's very easy to retrieve also complex
+structures out of XRC files using them.
+
+*/
projects / wxWidgets.git / blobdiff