\section{\class{wxZlibInputStream}}\label{wxzlibinputstream}
This filter stream decompresses a stream that is in zlib or gzip format.
-Note that reading the gzip format requires zlib version 1.2.0 greater.
+Note that reading the gzip format requires zlib version 1.2.1 or greater,
+(the builtin version does support gzip format).
The stream is not seekable, \helpref{SeekI()}{wxinputstreamseeki} returns
{\it wxInvalidOffset}. Also \helpref{GetSize()}{wxstreambasegetsize} is
\wxheading{Derived from}
-\helpref{wxFilterInputStream}{wxfilterinputstream}
+\helpref{wxFilterInputStream}{wxfilterinputstream}\\
+\helpref{wxInputStream}{wxinputstream}\\
+\helpref{wxStreamBase}{wxstreambase}
\wxheading{Include files}
<wx/zstream.h>
+\wxheading{Library}
+
+\helpref{wxBase}{librarieslist}
+
\wxheading{See also}
\helpref{wxInputStream}{wxinputstream},
\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxZlibInputStream::wxZlibInputStream}
+\membersection{wxZlibInputStream::wxZlibInputStream}\label{wxzlibinputstreamwxzlibinputstream}
+
+\func{}{wxZlibInputStream}{\param{wxInputStream\&}{ stream}, \param{int}{ flags = wxZLIB\_AUTO}}
-\func{}{wxZlibInputStream}{\param{wxInputStream\&}{ stream}, \param{int}{ flags = wxZLIB\_ZLIB | wxZLIB\_GZIP}}
+\func{}{wxZlibInputStream}{\param{wxInputStream*}{ stream}, \param{int}{ flags = wxZLIB\_AUTO}}
+
+If the parent stream is passed as a pointer then the new filter stream
+takes ownership of it. If it is passed by reference then it does not.
The {\it flags} wxZLIB\_ZLIB and wxZLIB\_GZIP specify whether the input data
-is in zlib or gzip format. If both are used, bitwise ored, then zlib will
+is in zlib or gzip format. If wxZLIB\_AUTO is used, then zlib will
autodetect the stream type, this is the default.
-If {\it flags} is zero, then the data is assumed to be a raw deflate stream
-without either zlib or gzip headers.
+
+If {\it flags} is wxZLIB\_NO\_HEADER, then the data is assumed to be a raw
+deflate stream without either zlib or gzip headers. This is a lower level
+mode, which is not usually used directly. It can be used to read a raw
+deflate stream embedded in a higher level protocol.
+
+%if WXWIN_COMPATIBILITY_2_4
+This version is not by default compatible with the output produced by
+the version of {\it wxZlibOutputStream} in wxWidgets 2.4.x. However,
+there is a compatibility mode, which is switched on by passing
+wxZLIB\_24COMPATIBLE for flags. Note that in when operating in compatibility
+mode error checking is very much reduced.
+%endif
The following symbols can be use for the flags:
\begin{verbatim}
// Flags
enum {
- wxZLIB_NO_HEADER = 0, // raw deflate stream, no header or checksum
- wxZLIB_ZLIB = 1, // zlib header and checksum
- wxZLIB_GZIP = 2 // gzip header and checksum, requires zlib 1.2+
+#if WXWIN_COMPATIBILITY_2_4
+ wxZLIB_24COMPATIBLE = 4, // read v2.4.x data without error
+#endif
+ wxZLIB_NO_HEADER = 0, // raw deflate stream, no header or checksum
+ wxZLIB_ZLIB = 1, // zlib header and checksum
+ wxZLIB_GZIP = 2, // gzip header and checksum, requires zlib 1.2.1+
+ wxZLIB_AUTO = 3 // autodetect header zlib or gzip
};
\end{verbatim}
+\membersection{wxZlibInputStream::CanHandleGZip}\label{wxzlibinputstreamcanhandlegzip}
+
+\func{static bool}{CanHandleGZip}{\void}
+
+Returns true if zlib library in use can handle gzip compressed data.
% -----------------------------------------------------------------------------
% wxZlibOutputStream
This stream compresses all data written to it. The compressed output can be
in zlib or gzip format.
-Note that writing the gzip format requires zlib version 1.2.0 greater.
+Note that writing the gzip format requires zlib version 1.2.1 or greater
+(the builtin version does support gzip format).
The stream is not seekable, \helpref{SeekO()}{wxoutputstreamseeko} returns
{\it wxInvalidOffset}.
\wxheading{Derived from}
-\helpref{wxFilterOutputStream}{wxfilteroutputstream}
+\helpref{wxFilterOutputStream}{wxfilteroutputstream}\\
+\helpref{wxOutputStream}{wxoutputstream}\\
+\helpref{wxStreamBase}{wxstreambase}
\wxheading{Include files}
<wx/zstream.h>
+\wxheading{Library}
+
+\helpref{wxBase}{librarieslist}
+
\wxheading{See also}
\helpref{wxOutputStream}{wxoutputstream},
\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxZlibOutputStream::wxZlibOutputStream}
+\membersection{wxZlibOutputStream::wxZlibOutputStream}\label{wxzliboutputstreamwxzliboutputstream}
\func{}{wxZlibOutputStream}{\param{wxOutputStream\&}{ stream}, \param{int}{ level = -1}, \param{int}{ flags = wxZLIB\_ZLIB}}
+\func{}{wxZlibOutputStream}{\param{wxOutputStream*}{ stream}, \param{int}{ level = -1}, \param{int}{ flags = wxZLIB\_ZLIB}}
+
Creates a new write-only compressed stream. {\it level} means level of
compression. It is number between 0 and 9 (including these values) where
0 means no compression and 9 best but slowest compression. -1 is default
value (currently equivalent to 6).
+If the parent stream is passed as a pointer then the new filter stream
+takes ownership of it. If it is passed by reference then it does not.
+
The {\it flags} wxZLIB\_ZLIB and wxZLIB\_GZIP specify whether the output data
will be in zlib or gzip format. wxZLIB\_ZLIB is the default.
-If {\it flags} is zero, then a raw deflate stream is output without either
-zlib or gzip headers.
+
+If {\it flags} is wxZLIB\_NO\_HEADER, then a raw deflate stream is output
+without either zlib or gzip headers. This is a lower level
+mode, which is not usually used directly. It can be used to embed a raw
+deflate stream in a higher level protocol.
The following symbols can be use for the compression level and flags:
enum {
wxZLIB_NO_HEADER = 0, // raw deflate stream, no header or checksum
wxZLIB_ZLIB = 1, // zlib header and checksum
- wxZLIB_GZIP = 2 // gzip header and checksum, requires zlib 1.2+
+ wxZLIB_GZIP = 2 // gzip header and checksum, requires zlib 1.2.1+
};
\end{verbatim}
+\membersection{wxZlibOutputStream::CanHandleGZip}\label{wxoutputstreamcanhandlegzip}
+
+\func{static bool}{CanHandleGZip}{\void}
+
+Returns true if zlib library in use can handle gzip compressed data.
+
projects / wxWidgets.git / blobdiff