/*
-** Apple Macintosh Developer Technical Support
-**
-** FileCopy: A robust, general purpose file copy routine.
-**
-** by Jim Luther, Apple Developer Technical Support Emeritus
-**
-** File: FileCopy.h
-**
-** Copyright © 1992-1998 Apple Computer, Inc.
-** All rights reserved.
-**
-** You may incorporate this sample code into your applications without
-** restriction, though the sample code has been provided "AS IS" and the
-** responsibility for its operation is 100% yours. However, what you are
-** not permitted to do is to redistribute the source as "DSC Sample Code"
-** after having made changes. If you're going to re-distribute the source,
-** we require that you make it clear in the source that the code was
-** descended from Apple Sample Code, but that you've made changes.
+ File: FileCopy.h
+
+ Contains: A robust, general purpose file copy routine.
+
+ Version: Technology: MoreFiles
+ Release: 1.5.2
+
+ Copyright: © 1992-2001 by Apple Computer, Inc., all rights reserved.
+
+ Bugs?: For bug reports, consult the following page on
+ the World Wide Web:
+
+ http://developer.apple.com/bugreporter/
+
+*/
+
+/*
+ You may incorporate this sample code into your applications without
+ restriction, though the sample code has been provided "AS IS" and the
+ responsibility for its operation is 100% yours. However, what you are
+ not permitted to do is to redistribute the source as "DSC Sample Code"
+ after having made changes. If you're going to re-distribute the source,
+ we require that you make it clear in the source that the code was
+ descended from Apple Sample Code, but that you've made changes.
*/
#ifndef __FILECOPY__
#define __FILECOPY__
-#include <Types.h>
+#ifndef __MACTYPES__
+#include <MacTypes.h>
+#endif
+
+#ifndef __FILES__
#include <Files.h>
+#endif
-#include "optim.h"
+#include "Optimization.h"
+
+
+#if PRAGMA_ONCE
+#pragma once
+#endif
#ifdef __cplusplus
extern "C" {
#endif
+#if PRAGMA_IMPORT
+#pragma import on
+#endif
+
+#if PRAGMA_STRUCT_ALIGN
+ #pragma options align=mac68k
+#elif PRAGMA_STRUCT_PACKPUSH
+ #pragma pack(push, 2)
+#elif PRAGMA_STRUCT_PACK
+ #pragma pack(2)
+#endif
+
/*****************************************************************************/
-pascal OSErr FileCopy(short srcVRefNum,
- long srcDirID,
- ConstStr255Param srcName,
- short dstVRefNum,
- long dstDirID,
- ConstStr255Param dstPathname,
- ConstStr255Param copyName,
- void *copyBufferPtr,
- long copyBufferSize,
- Boolean preflight);
-/* ¦ Duplicate a file and optionally rename it.
- The FileCopy function duplicates a file and optionally renames it.
- Since the PBHCopyFile routine is only available on some
- AFP server volumes under specific conditions, this routine
- either uses PBHCopyFile, or does all of the work PBHCopyFile
- does. The srcVRefNum, srcDirID and srcName are used to
- determine the location of the file to copy. The dstVRefNum
- dstDirID and dstPathname are used to determine the location of
- the destination directory. If copyName <> NIL, then it points
- to the name of the new file. If copyBufferPtr <> NIL, it
- points to a buffer of copyBufferSize that is used to copy
- the file's data. The larger the supplied buffer, the
- faster the copy. If copyBufferPtr = NIL, then this routine
- allocates a buffer in the application heap. If you pass a
- copy buffer to this routine, make its size a multiple of 512
- ($200) bytes for optimum performance.
-
- srcVRefNum input: Source volume specification.
- srcDirID input: Source directory ID.
- srcName input: Source file name.
- dstVRefNum input: Destination volume specification.
- dstDirID input: Destination directory ID.
- dstPathname input: Pointer to destination directory name, or
- nil when dstDirID specifies a directory.
- copyName input: Points to the new file name if the file is
- to be renamed or nil if the file isn't to
- be renamed.
- copyBufferPtr input: Points to a buffer of copyBufferSize that
- is used the i/o buffer for the copy or
- nil if you want FileCopy to allocate its
- own buffer in the application heap.
- copyBufferSize input: The size of the buffer pointed to
- by copyBufferPtr.
- preflight input: If true, FileCopy makes sure there are enough
- allocation blocks on the destination volume to
- hold both the data and resource forks before
- starting the copy.
-
- Result Codes
- noErr 0 No error
- readErr Ð19 Driver does not respond to read requests
- writErr Ð20 Driver does not respond to write requests
- badUnitErr Ð21 Driver reference number does not
- match unit table
- unitEmptyErr Ð22 Driver reference number specifies a
- nil handle in unit table
- abortErr Ð27 Request aborted by KillIO
- notOpenErr Ð28 Driver not open
- dskFulErr -34 Destination volume is full
- nsvErr -35 No such volume
- ioErr -36 I/O error
- bdNamErr -37 Bad filename
- tmfoErr -42 Too many files open
- fnfErr -43 Source file not found, or destination
- directory does not exist
- wPrErr -44 Volume locked by hardware
- fLckdErr -45 File is locked
- vLckdErr -46 Destination volume is read-only
- fBsyErr -47 The source or destination file could
- not be opened with the correct access
- modes
- dupFNErr -48 Destination file already exists
- opWrErr -49 File already open for writing
- paramErr -50 No default volume or function not
- supported by volume
- permErr -54 File is already open and cannot be opened using specified deny modes
- memFullErr -108 Copy buffer could not be allocated
- dirNFErr -120 Directory not found or incomplete pathname
- wrgVolTypErr -123 Function not supported by volume
- afpAccessDenied -5000 User does not have the correct access
- afpDenyConflict -5006 The source or destination file could
- not be opened with the correct access
- modes
- afpObjectTypeErr -5025 Source is a directory, directory not found
- or incomplete pathname
-
- __________
-
- Also see: FSpFileCopy, DirectoryCopy, FSpDirectoryCopy
+EXTERN_API( OSErr )
+FileCopy(
+ short srcVRefNum,
+ long srcDirID,
+ ConstStr255Param srcName,
+ short dstVRefNum,
+ long dstDirID,
+ ConstStr255Param dstPathname,
+ ConstStr255Param copyName,
+ void * copyBufferPtr,
+ long copyBufferSize,
+ Boolean preflight);
+
+
+/*
+ The FileCopy function duplicates a file and optionally renames it.
+ Since the PBHCopyFile routine is only available on some
+ AFP server volumes under specific conditions, this routine
+ either uses PBHCopyFile, or does all of the work PBHCopyFile
+ does. The srcVRefNum, srcDirID and srcName are used to
+ determine the location of the file to copy. The dstVRefNum
+ dstDirID and dstPathname are used to determine the location of
+ the destination directory. If copyName <> NIL, then it points
+ to the name of the new file. If copyBufferPtr <> NIL, it
+ points to a buffer of copyBufferSize that is used to copy
+ the file's data. The larger the supplied buffer, the
+ faster the copy. If copyBufferPtr = NIL, then this routine
+ allocates a buffer in the application heap. If you pass a
+ copy buffer to this routine, make its size a multiple of 512
+ ($200) bytes for optimum performance.
+
+ srcVRefNum input: Source volume specification.
+ srcDirID input: Source directory ID.
+ srcName input: Source file name.
+ dstVRefNum input: Destination volume specification.
+ dstDirID input: Destination directory ID.
+ dstPathname input: Pointer to destination directory name, or
+ nil when dstDirID specifies a directory.
+ copyName input: Points to the new file name if the file is
+ to be renamed or nil if the file isn't to
+ be renamed.
+ copyBufferPtr input: Points to a buffer of copyBufferSize that
+ is used the i/o buffer for the copy or
+ nil if you want FileCopy to allocate its
+ own buffer in the application heap.
+ copyBufferSize input: The size of the buffer pointed to
+ by copyBufferPtr.
+ preflight input: If true, FileCopy makes sure there are enough
+ allocation blocks on the destination volume to
+ hold both the data and resource forks before
+ starting the copy.
+
+ Result Codes
+ noErr 0 No error
+ readErr Ð19 Driver does not respond to read requests
+ writErr Ð20 Driver does not respond to write requests
+ badUnitErr Ð21 Driver reference number does not
+ match unit table
+ unitEmptyErr Ð22 Driver reference number specifies a
+ nil handle in unit table
+ abortErr Ð27 Request aborted by KillIO
+ notOpenErr Ð28 Driver not open
+ dskFulErr -34 Destination volume is full
+ nsvErr -35 No such volume
+ ioErr -36 I/O error
+ bdNamErr -37 Bad filename
+ tmfoErr -42 Too many files open
+ fnfErr -43 Source file not found, or destination
+ directory does not exist
+ wPrErr -44 Volume locked by hardware
+ fLckdErr -45 File is locked
+ vLckdErr -46 Destination volume is read-only
+ fBsyErr -47 The source or destination file could
+ not be opened with the correct access
+ modes
+ dupFNErr -48 Destination file already exists
+ opWrErr -49 File already open for writing
+ paramErr -50 No default volume or function not
+ supported by volume
+ permErr -54 File is already open and cannot be opened using specified deny modes
+ memFullErr -108 Copy buffer could not be allocated
+ dirNFErr -120 Directory not found or incomplete pathname
+ wrgVolTypErr -123 Function not supported by volume
+ afpAccessDenied -5000 User does not have the correct access
+ afpDenyConflict -5006 The source or destination file could
+ not be opened with the correct access
+ modes
+ afpObjectTypeErr -5025 Source is a directory, directory not found
+ or incomplete pathname
+
+ __________
+
+ Also see: FSpFileCopy, DirectoryCopy, FSpDirectoryCopy
*/
/*****************************************************************************/
-pascal OSErr FSpFileCopy(const FSSpec *srcSpec,
- const FSSpec *dstSpec,
- ConstStr255Param copyName,
- void *copyBufferPtr,
- long copyBufferSize,
- Boolean preflight);
-/* ¦ Duplicate a file and optionally rename it.
- The FSpFileCopy function duplicates a file and optionally renames it.
- Since the PBHCopyFile routine is only available on some
- AFP server volumes under specific conditions, this routine
- either uses PBHCopyFile, or does all of the work PBHCopyFile
- does. The srcSpec is used to
- determine the location of the file to copy. The dstSpec is
- used to determine the location of the
- destination directory. If copyName <> NIL, then it points
- to the name of the new file. If copyBufferPtr <> NIL, it
- points to a buffer of copyBufferSize that is used to copy
- the file's data. The larger the supplied buffer, the
- faster the copy. If copyBufferPtr = NIL, then this routine
- allocates a buffer in the application heap. If you pass a
- copy buffer to this routine, make its size a multiple of 512
- ($200) bytes for optimum performance.
-
- srcSpec input: An FSSpec record specifying the source file.
- dstSpec input: An FSSpec record specifying the destination
- directory.
- copyName input: Points to the new file name if the file is
- to be renamed or nil if the file isn't to
- be renamed.
- copyBufferPtr input: Points to a buffer of copyBufferSize that
- is used the i/o buffer for the copy or
- nil if you want FileCopy to allocate its
- own buffer in the application heap.
- copyBufferSize input: The size of the buffer pointed to
- by copyBufferPtr.
- preflight input: If true, FSpFileCopy makes sure there are
- enough allocation blocks on the destination
- volume to hold both the data and resource forks
- before starting the copy.
-
- Result Codes
- noErr 0 No error
- readErr Ð19 Driver does not respond to read requests
- writErr Ð20 Driver does not respond to write requests
- badUnitErr Ð21 Driver reference number does not
- match unit table
- unitEmptyErr Ð22 Driver reference number specifies a
- nil handle in unit table
- abortErr Ð27 Request aborted by KillIO
- notOpenErr Ð28 Driver not open
- dskFulErr -34 Destination volume is full
- nsvErr -35 No such volume
- ioErr -36 I/O error
- bdNamErr -37 Bad filename
- tmfoErr -42 Too many files open
- fnfErr -43 Source file not found, or destination
- directory does not exist
- wPrErr -44 Volume locked by hardware
- fLckdErr -45 File is locked
- vLckdErr -46 Destination volume is read-only
- fBsyErr -47 The source or destination file could
- not be opened with the correct access
- modes
- dupFNErr -48 Destination file already exists
- opWrErr -49 File already open for writing
- paramErr -50 No default volume or function not
- supported by volume
- permErr -54 File is already open and cannot be opened using specified deny modes
- memFullErr -108 Copy buffer could not be allocated
- dirNFErr -120 Directory not found or incomplete pathname
- wrgVolTypErr -123 Function not supported by volume
- afpAccessDenied -5000 User does not have the correct access
- afpDenyConflict -5006 The source or destination file could
- not be opened with the correct access
- modes
- afpObjectTypeErr -5025 Source is a directory, directory not found
- or incomplete pathname
-
- __________
-
- Also see: FileCopy, DirectoryCopy, FSpDirectoryCopy
+EXTERN_API( OSErr )
+FSpFileCopy(
+ const FSSpec * srcSpec,
+ const FSSpec * dstSpec,
+ ConstStr255Param copyName,
+ void * copyBufferPtr,
+ long copyBufferSize,
+ Boolean preflight);
+
+
+/*
+ The FSpFileCopy function duplicates a file and optionally renames it.
+ Since the PBHCopyFile routine is only available on some
+ AFP server volumes under specific conditions, this routine
+ either uses PBHCopyFile, or does all of the work PBHCopyFile
+ does. The srcSpec is used to
+ determine the location of the file to copy. The dstSpec is
+ used to determine the location of the
+ destination directory. If copyName <> NIL, then it points
+ to the name of the new file. If copyBufferPtr <> NIL, it
+ points to a buffer of copyBufferSize that is used to copy
+ the file's data. The larger the supplied buffer, the
+ faster the copy. If copyBufferPtr = NIL, then this routine
+ allocates a buffer in the application heap. If you pass a
+ copy buffer to this routine, make its size a multiple of 512
+ ($200) bytes for optimum performance.
+
+ srcSpec input: An FSSpec record specifying the source file.
+ dstSpec input: An FSSpec record specifying the destination
+ directory.
+ copyName input: Points to the new file name if the file is
+ to be renamed or nil if the file isn't to
+ be renamed.
+ copyBufferPtr input: Points to a buffer of copyBufferSize that
+ is used the i/o buffer for the copy or
+ nil if you want FileCopy to allocate its
+ own buffer in the application heap.
+ copyBufferSize input: The size of the buffer pointed to
+ by copyBufferPtr.
+ preflight input: If true, FSpFileCopy makes sure there are
+ enough allocation blocks on the destination
+ volume to hold both the data and resource forks
+ before starting the copy.
+
+ Result Codes
+ noErr 0 No error
+ readErr Ð19 Driver does not respond to read requests
+ writErr Ð20 Driver does not respond to write requests
+ badUnitErr Ð21 Driver reference number does not
+ match unit table
+ unitEmptyErr Ð22 Driver reference number specifies a
+ nil handle in unit table
+ abortErr Ð27 Request aborted by KillIO
+ notOpenErr Ð28 Driver not open
+ dskFulErr -34 Destination volume is full
+ nsvErr -35 No such volume
+ ioErr -36 I/O error
+ bdNamErr -37 Bad filename
+ tmfoErr -42 Too many files open
+ fnfErr -43 Source file not found, or destination
+ directory does not exist
+ wPrErr -44 Volume locked by hardware
+ fLckdErr -45 File is locked
+ vLckdErr -46 Destination volume is read-only
+ fBsyErr -47 The source or destination file could
+ not be opened with the correct access
+ modes
+ dupFNErr -48 Destination file already exists
+ opWrErr -49 File already open for writing
+ paramErr -50 No default volume or function not
+ supported by volume
+ permErr -54 File is already open and cannot be opened using specified deny modes
+ memFullErr -108 Copy buffer could not be allocated
+ dirNFErr -120 Directory not found or incomplete pathname
+ wrgVolTypErr -123 Function not supported by volume
+ afpAccessDenied -5000 User does not have the correct access
+ afpDenyConflict -5006 The source or destination file could
+ not be opened with the correct access
+ modes
+ afpObjectTypeErr -5025 Source is a directory, directory not found
+ or incomplete pathname
+
+ __________
+
+ Also see: FileCopy, DirectoryCopy, FSpDirectoryCopy
*/
/*****************************************************************************/
+#include "OptimizationEnd.h"
+
+#if PRAGMA_STRUCT_ALIGN
+ #pragma options align=reset
+#elif PRAGMA_STRUCT_PACKPUSH
+ #pragma pack(pop)
+#elif PRAGMA_STRUCT_PACK
+ #pragma pack()
+#endif
+
+#ifdef PRAGMA_IMPORT_OFF
+#pragma import off
+#elif PRAGMA_IMPORT
+#pragma import reset
+#endif
+
#ifdef __cplusplus
}
#endif
-#include "optimend.h"
+#endif /* __FILECOPY__ */
-#endif /* __FILECOPY__ */
projects / wxWidgets.git / blobdiff