#include "wx/colordlg.h"
#include "wx/image.h"
#include "wx/artprov.h"
-
-#define wxTEST_GRAPHICS 1
-
-#if wxTEST_GRAPHICS
+#include "wx/dcgraph.h"
+#include "wx/overlay.h"
#include "wx/graphics.h"
-#if wxUSE_GRAPHICS_CONTEXT == 0
-#undef wxTEST_GRAPHICS
-#define wxTEST_GRAPHICS 0
-#endif
-#else
-#undef wxUSE_GRAPHICS_CONTEXT
-#define wxUSE_GRAPHICS_CONTEXT 0
-#endif
+#include "wx/filename.h"
+
+#define TEST_CAIRO_EVERYWHERE 0
// ----------------------------------------------------------------------------
-// ressources
+// resources
// ----------------------------------------------------------------------------
// the application icon
#include "mondrian.xpm"
#endif
-// ----------------------------------------------------------------------------
-// constants
-// ----------------------------------------------------------------------------
-
-// what do we show on screen (there are too many shapes to put them all on
-// screen simultaneously)
-enum ScreenToShow
-{
- Show_Default,
- Show_Text,
- Show_Lines,
- Show_Brushes,
- Show_Polygons,
- Show_Mask,
- Show_Ops,
- Show_Regions,
- Show_Circles,
- Show_Splines,
-#if wxUSE_GRAPHICS_CONTEXT
- Show_Alpha,
-#endif
- Show_Gradient,
- Show_Max
-};
-
// ----------------------------------------------------------------------------
// global variables
// ----------------------------------------------------------------------------
int m_backgroundMode;
int m_textureBackground;
- int m_mapMode;
+ wxMappingMode m_mapMode;
double m_xUserScale;
double m_yUserScale;
int m_xLogicalOrigin;
void OnPaint(wxPaintEvent &event);
void OnMouseMove(wxMouseEvent &event);
+ void OnMouseDown(wxMouseEvent &event);
+ void OnMouseUp(wxMouseEvent &event);
- void ToShow(ScreenToShow show) { m_show = show; Refresh(); }
+ void ToShow(int show) { m_show = show; Refresh(); }
// set or remove the clipping region
void Clip(bool clip) { m_clip = clip; Refresh(); }
#endif
protected:
+ enum DrawMode
+ {
+ Draw_Normal,
+ Draw_Stretch
+ };
+
void DrawTestLines( int x, int y, int width, wxDC &dc );
void DrawTestPoly(wxDC& dc);
void DrawTestBrushes(wxDC& dc);
void DrawText(wxDC& dc);
- void DrawImages(wxDC& dc);
+ void DrawImages(wxDC& dc, DrawMode mode);
void DrawWithLogicalOps(wxDC& dc);
#if wxUSE_GRAPHICS_CONTEXT
void DrawAlpha(wxDC& dc);
+ void DrawGraphics(wxGraphicsContext* gc);
#endif
void DrawRegions(wxDC& dc);
void DrawCircles(wxDC& dc);
private:
MyFrame *m_owner;
- ScreenToShow m_show;
+ int m_show;
wxBitmap m_smile_bmp;
wxIcon m_std_icon;
bool m_clip;
+ wxOverlay m_overlay;
+ bool m_rubberBand;
+ wxPoint m_anchorpoint;
+ wxPoint m_currentpoint;
#if wxUSE_GRAPHICS_CONTEXT
bool m_useContext ;
#endif
File_ShowBrushes,
File_ShowPolygons,
File_ShowMask,
+ File_ShowMaskStretch,
File_ShowOps,
File_ShowRegions,
File_ShowCircles,
File_ShowSplines,
#if wxUSE_GRAPHICS_CONTEXT
File_ShowAlpha,
+ File_ShowGraphics,
#endif
File_ShowGradients,
MenuShow_Last = File_ShowGradients,
gs_bmp36 = new wxBitmap;
wxPathList pathList;
+ // special hack for Unix in-tree sample build, don't do this in real
+ // programs, use wxStandardPaths instead
+ pathList.Add(wxFileName(argv[0]).GetPath());
pathList.Add(_T("."));
pathList.Add(_T(".."));
+ pathList.Add(_T("../.."));
wxString path = pathList.FindValidPath(_T("pat4.bmp"));
if ( !path )
// `Main program' equivalent: the program execution "starts" here
bool MyApp::OnInit()
{
+ if ( !wxApp::OnInit() )
+ return false;
+
// Create the main application window
MyFrame *frame = new MyFrame(_T("Drawing sample"),
wxPoint(50, 50), wxSize(550, 340));
wxT("for this sample from the current or parent ")
wxT("directory, please copy them there."));
- // stop here
- DeleteBitmaps();
-
- return false;
+ // still continue, the sample can be used without images too if they're
+ // missing for whatever reason
}
- // ok, continue
return true;
}
BEGIN_EVENT_TABLE(MyCanvas, wxScrolledWindow)
EVT_PAINT (MyCanvas::OnPaint)
EVT_MOTION (MyCanvas::OnMouseMove)
+ EVT_LEFT_DOWN (MyCanvas::OnMouseDown)
+ EVT_LEFT_UP (MyCanvas::OnMouseUp)
END_EVENT_TABLE()
#include "smile.xpm"
wxHSCROLL | wxVSCROLL | wxNO_FULL_REPAINT_ON_RESIZE)
{
m_owner = parent;
- m_show = Show_Default;
+ m_show = File_ShowDefault;
m_smile_bmp = wxBitmap(smile_xpm);
m_std_icon = wxArtProvider::GetIcon(wxART_INFORMATION);
m_clip = false;
+ m_rubberBand = false;
#if wxUSE_GRAPHICS_CONTEXT
m_useContext = false;
#endif
dc.DrawText( _T("This is Swiss 18pt text."), 110, 40 );
- long length;
- long height;
- long descent;
+ wxCoord length;
+ wxCoord height;
+ wxCoord descent;
dc.GetTextExtent( _T("This is Swiss 18pt text."), &length, &height, &descent );
text.Printf( wxT("Dimensions are length %ld, height %ld, descent %ld"), length, height, descent );
dc.DrawText( text, 110, 80 );
// test the logical function effect
wxCoord y = 150;
dc.SetLogicalFunction(wxINVERT);
- dc.DrawText( _T("There should be no text below"), 110, 150 );
+ // text drawing should ignore logical function
+ dc.DrawText( _T("There should be a text below"), 110, 150 );
dc.DrawRectangle( 110, y, 100, height );
- // twice drawn inverted should result in invisible
y += height;
- dc.DrawText( _T("Invisible text"), 110, y );
+ dc.DrawText( _T("Visible text"), 110, y );
dc.DrawRectangle( 110, y, 100, height );
- dc.DrawText( _T("Invisible text"), 110, y );
+ dc.DrawText( _T("Visible text"), 110, y );
dc.DrawRectangle( 110, y, 100, height );
dc.SetLogicalFunction(wxCOPY);
y += height;
dc.DrawRectangle( 110, y, 100, height );
- dc.DrawText( _T("Visible text"), 110, y );
+ dc.DrawText( _T("Another visible text"), 110, y );
}
static const struct
{
const wxChar *name;
- int rop;
+ wxRasterOperationMode rop;
} rasterOperations[] =
{
{ wxT("wxAND"), wxAND },
{ wxT("wxXOR"), wxXOR },
};
-void MyCanvas::DrawImages(wxDC& dc)
+void MyCanvas::DrawImages(wxDC& dc, DrawMode mode)
{
dc.DrawText(_T("original image"), 0, 0);
dc.DrawBitmap(*gs_bmpNoMask, 0, 20, 0);
dc.DrawText(rasterOperations[n].name, x, y - 20);
memDC.SelectObject(*gs_bmpWithColMask);
- dc.Blit(x, y, cx, cy, &memDC, 0, 0, rasterOperations[n].rop, true);
+ if ( mode == Draw_Stretch )
+ {
+ dc.StretchBlit(x, y, cx, cy, &memDC, 0, 0, cx/2, cy/2,
+ rasterOperations[n].rop, true);
+ }
+ else
+ {
+ dc.Blit(x, y, cx, cy, &memDC, 0, 0, rasterOperations[n].rop, true);
+ }
}
}
wxDouble margin = 20 ;
wxDouble width = 180 ;
wxDouble radius = 30 ;
-
+
dc.SetPen( wxPen( wxColour( 128, 0, 0, 255 ),12, wxSOLID));
dc.SetBrush( wxBrush( wxColour( 255, 0, 0, 255),wxSOLID));
-
+
wxRect r(margin,margin+width*0.66,width,width) ;
-
+
dc.DrawRoundedRectangle( r.x, r.y, r.width, r.width, radius ) ;
-
+
dc.SetPen( wxPen( wxColour( 0, 0, 128, 255 ),12, wxSOLID));
dc.SetBrush( wxBrush( wxColour( 0, 0, 255, 255),wxSOLID));
-
+
r.Offset( width * 0.8 , - width * 0.66 ) ;
-
+
dc.DrawRoundedRectangle( r.x, r.y, r.width, r.width, radius ) ;
-
+
dc.SetPen( wxPen( wxColour( 128, 128, 0, 255 ),12, wxSOLID));
dc.SetBrush( wxBrush( wxColour( 192, 192, 0, 255),wxSOLID));
r.Offset( width * 0.8 , width *0.5 ) ;
-
+
dc.DrawRoundedRectangle( r.x, r.y, r.width, r.width, radius ) ;
-
+
dc.SetPen( *wxTRANSPARENT_PEN ) ;
dc.SetBrush( wxBrush( wxColour(255,255,128,128) ) );
dc.DrawRoundedRectangle( 0 , margin + width / 2 , width * 3 , 100 , radius) ;
-
+
dc.SetTextForeground( wxColour(255,255,0,128) );
dc.SetFont( wxFont( 40, wxFONTFAMILY_SWISS, wxFONTSTYLE_ITALIC, wxFONTWEIGHT_NORMAL ) );
dc.DrawText( wxT("Hello!"), 120, 80 );
#endif
+#if wxUSE_GRAPHICS_CONTEXT
+
+const int BASE = 80.0;
+const int BASE2 = BASE/2;
+const int BASE4 = BASE/4;
+
+static inline double DegToRad(double deg) { return (deg * M_PI) / 180.0; }
+
+
+// modeled along Robin Dunn's GraphicsContext.py sample
+
+void MyCanvas::DrawGraphics(wxGraphicsContext* gc)
+{
+ wxFont font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
+ gc->SetFont(font,*wxBLACK);
+
+ // make a path that contains a circle and some lines, centered at 0,0
+ wxGraphicsPath path = gc->CreatePath() ;
+ path.AddCircle( 0, 0, BASE2 );
+ path.MoveToPoint(0, -BASE2);
+ path.AddLineToPoint(0, BASE2);
+ path.MoveToPoint(-BASE2, 0);
+ path.AddLineToPoint(BASE2, 0);
+ path.CloseSubpath();
+ path.AddRectangle(-BASE4, -BASE4/2, BASE2, BASE4);
+
+ // Now use that path to demonstrate various capbilites of the grpahics context
+ gc->PushState(); // save current translation/scale/other state
+ gc->Translate(60, 75); // reposition the context origin
+
+ gc->SetPen(wxPen("navy", 1));
+ gc->SetBrush(wxBrush("pink"));
+
+ for( int i = 0 ; i < 3 ; ++i )
+ {
+ wxString label;
+ switch( i )
+ {
+ case 0 :
+ label = "StrokePath";
+ break;
+ case 1 :
+ label = "FillPath";
+ break;
+ case 2 :
+ label = "DrawPath";
+ break;
+ }
+ wxDouble w, h;
+ gc->GetTextExtent(label, &w, &h, NULL, NULL);
+ gc->DrawText(label, -w/2, -BASE2-h-4);
+ switch( i )
+ {
+ case 0 :
+ gc->StrokePath(path);
+ break;
+ case 1 :
+ gc->FillPath(path);
+ break;
+ case 2 :
+ gc->DrawPath(path);
+ break;
+ }
+ gc->Translate(2*BASE, 0);
+ }
+
+ gc->PopState(); // restore saved state
+ gc->PushState(); // save it again
+ gc->Translate(60, 200); // offset to the lower part of the window
+
+ gc->DrawText("Scale", 0, -BASE2);
+ gc->Translate(0, 20);
+
+ gc->SetBrush(wxBrush(wxColour(178, 34, 34, 128)));// 128 == half transparent
+ for( int i = 0 ; i < 8 ; ++i )
+ {
+ gc->Scale(1.08, 1.08); // increase scale by 8%
+ gc->Translate(5,5);
+ gc->DrawPath(path);
+ }
+
+ gc->PopState(); // restore saved state
+ gc->PushState(); // save it again
+ gc->Translate(400, 200);
+
+ gc->DrawText("Rotate", 0, -BASE2);
+
+ // Move the origin over to the next location
+ gc->Translate(0, 75);
+
+ // draw our path again, rotating it about the central point,
+ // and changing colors as we go
+ for ( int angle = 0 ; angle < 360 ; angle += 30 )
+ {
+ gc->PushState(); // save this new current state so we can
+ // pop back to it at the end of the loop
+ wxImage::RGBValue val = wxImage::HSVtoRGB(wxImage::HSVValue(float(angle)/360, 1, 1));
+ gc->SetBrush(wxBrush(wxColour(val.red, val.green, val.blue, 64)));
+ gc->SetPen(wxPen(wxColour(val.red, val.green, val.blue, 128)));
+
+ // use translate to artfully reposition each drawn path
+ gc->Translate(1.5 * BASE2 * cos(DegToRad(angle)),
+ 1.5 * BASE2 * sin(DegToRad(angle)));
+
+ // use Rotate to rotate the path
+ gc->Rotate(DegToRad(angle));
+
+ // now draw it
+ gc->DrawPath(path);
+ gc->PopState();
+ }
+ gc->PopState();
+}
+#endif
+
void MyCanvas::DrawCircles(wxDC& dc)
{
int x = 100,
dc.DrawEllipticArc(x + r, y, 2*r, r, 90, 180);
dc.DrawEllipticArc(x + 3*r, y, 2*r, r, 180, 270);
dc.DrawEllipticArc(x + 5*r, y, 2*r, r, 270, 360);
-
+
// same as above, just transparent brush
-
+
dc.SetPen( *wxRED_PEN );
dc.SetBrush( *wxTRANSPARENT_BRUSH );
dc.DrawEllipticArc(x + r, y, 2*r, r, 90, 180);
dc.DrawEllipticArc(x + 3*r, y, 2*r, r, 180, 270);
dc.DrawEllipticArc(x + 5*r, y, 2*r, r, 270, 360);
-
+
}
void MyCanvas::DrawSplines(wxDC& dc)
dc.DrawText(_T("Blue in bottom right corner"), r.x, r.y);
r.Offset(0, TEXT_HEIGHT);
dc.GradientFillConcentric(r, *wxBLUE, *wxWHITE, wxPoint(r.width, r.height));
+
+ // check that the area filled by the gradient is exactly the interior of
+ // the rectangle
+ r.x = 350;
+ r.y = 30;
+ dc.DrawText("The interior should be filled but", r.x, r.y);
+ r.y += 15;
+ dc.DrawText(" the red border should remain visible:", r.x, r.y);
+ r.y += 15;
+
+ r.width =
+ r.height = 50;
+ wxRect r2 = r;
+ r2.x += 60;
+ wxRect r3 = r;
+ r3.y += 60;
+ wxRect r4 = r2;
+ r4.y += 60;
+ dc.SetPen(wxPen(wxColour(255, 0, 0)));
+ dc.DrawRectangle(r);
+ r.Deflate(1);
+ dc.GradientFillLinear(r, wxColour(0,255,0), wxColour(0,0,0), wxNORTH);
+ dc.DrawRectangle(r2);
+ r2.Deflate(1);
+ dc.GradientFillLinear(r2, wxColour(0,0,0), wxColour(0,255,0), wxSOUTH);
+ dc.DrawRectangle(r3);
+ r3.Deflate(1);
+ dc.GradientFillLinear(r3, wxColour(0,255,0), wxColour(0,0,0), wxEAST);
+ dc.DrawRectangle(r4);
+ r4.Deflate(1);
+ dc.GradientFillLinear(r4, wxColour(0,0,0), wxColour(0,255,0), wxWEST);
}
void MyCanvas::DrawRegions(wxDC& dc)
if ( !firstTime )
region.Offset(10, 10);
#endif
- dc.SetClippingRegion(region);
+ dc.SetDeviceClippingRegion(region);
dc.SetBrush( *wxGREY_BRUSH );
dc.DrawRectangle( x, y, 310, 310 );
}
}
+#if TEST_CAIRO_EVERYWHERE
+extern wxGraphicsRenderer* gCairoRenderer;
+#endif
+
void MyCanvas::OnPaint(wxPaintEvent &WXUNUSED(event))
{
wxPaintDC pdc(this);
#if wxUSE_GRAPHICS_CONTEXT
+#if TEST_CAIRO_EVERYWHERE
+ wxGCDC gdc;
+ gdc.SetGraphicsContext( gCairoRenderer->CreateContext( pdc ) );
+#else
wxGCDC gdc( pdc ) ;
+#endif
wxDC &dc = m_useContext ? (wxDC&) gdc : (wxDC&) pdc ;
#else
wxDC &dc = pdc ;
switch ( m_show )
{
- case Show_Default:
+ case File_ShowDefault:
DrawDefault(dc);
break;
- case Show_Circles:
+ case File_ShowCircles:
DrawCircles(dc);
break;
- case Show_Splines:
+ case File_ShowSplines:
DrawSplines(dc);
break;
- case Show_Regions:
+ case File_ShowRegions:
DrawRegions(dc);
break;
- case Show_Text:
+ case File_ShowText:
DrawText(dc);
break;
- case Show_Lines:
+ case File_ShowLines:
DrawTestLines( 0, 100, 0, dc );
DrawTestLines( 0, 320, 1, dc );
DrawTestLines( 0, 540, 2, dc );
DrawTestLines( 0, 760, 6, dc );
break;
- case Show_Brushes:
+ case File_ShowBrushes:
DrawTestBrushes(dc);
break;
- case Show_Polygons:
+ case File_ShowPolygons:
DrawTestPoly(dc);
break;
- case Show_Mask:
- DrawImages(dc);
+ case File_ShowMask:
+ DrawImages(dc, Draw_Normal);
break;
- case Show_Ops:
+ case File_ShowMaskStretch:
+ DrawImages(dc, Draw_Stretch);
+ break;
+
+ case File_ShowOps:
DrawWithLogicalOps(dc);
break;
-
+
#if wxUSE_GRAPHICS_CONTEXT
- case Show_Alpha:
+ case File_ShowAlpha:
DrawAlpha(dc);
break;
+ case File_ShowGraphics:
+ DrawGraphics(gdc.GetGraphicsContext());
+ break;
#endif
- case Show_Gradient:
+ case File_ShowGradients:
DrawGradients(dc);
break;
void MyCanvas::OnMouseMove(wxMouseEvent &event)
{
#if wxUSE_STATUSBAR
- wxClientDC dc(this);
- PrepareDC(dc);
- m_owner->PrepareDC(dc);
-
- wxPoint pos = event.GetPosition();
- long x = dc.DeviceToLogicalX( pos.x );
- long y = dc.DeviceToLogicalY( pos.y );
- wxString str;
- str.Printf( wxT("Current mouse position: %d,%d"), (int)x, (int)y );
- m_owner->SetStatusText( str );
+ {
+ wxClientDC dc(this);
+ PrepareDC(dc);
+ m_owner->PrepareDC(dc);
+
+ wxPoint pos = event.GetPosition();
+ long x = dc.DeviceToLogicalX( pos.x );
+ long y = dc.DeviceToLogicalY( pos.y );
+ wxString str;
+ str.Printf( wxT("Current mouse position: %d,%d"), (int)x, (int)y );
+ m_owner->SetStatusText( str );
+ }
+
+ if ( m_rubberBand )
+ {
+ int x,y, xx, yy ;
+ event.GetPosition(&x,&y);
+ CalcUnscrolledPosition( x, y, &xx, &yy );
+ m_currentpoint = wxPoint( xx , yy ) ;
+ wxRect newrect ( m_anchorpoint , m_currentpoint ) ;
+
+ wxClientDC dc( this ) ;
+ PrepareDC( dc ) ;
+
+ wxDCOverlay overlaydc( m_overlay, &dc );
+ overlaydc.Clear();
+#ifdef __WXMAC__
+ dc.SetPen( *wxGREY_PEN );
+ dc.SetBrush( wxColour( 192,192,192,64 ) );
+#else
+ dc.SetPen( wxPen( *wxLIGHT_GREY, 2, wxSOLID ) );
+ dc.SetBrush( *wxTRANSPARENT_BRUSH );
+#endif
+ dc.DrawRectangle( newrect );
+ }
#else
wxUnusedVar(event);
#endif // wxUSE_STATUSBAR
}
+void MyCanvas::OnMouseDown(wxMouseEvent &event)
+{
+ int x,y,xx,yy ;
+ event.GetPosition(&x,&y);
+ CalcUnscrolledPosition( x, y, &xx, &yy );
+ m_anchorpoint = wxPoint( xx , yy ) ;
+ m_currentpoint = m_anchorpoint ;
+ m_rubberBand = true ;
+ CaptureMouse() ;
+}
+
+void MyCanvas::OnMouseUp(wxMouseEvent &event)
+{
+ if ( m_rubberBand )
+ {
+ ReleaseMouse();
+ {
+ wxClientDC dc( this );
+ PrepareDC( dc );
+ wxDCOverlay overlaydc( m_overlay, &dc );
+ overlaydc.Clear();
+ }
+ m_overlay.Reset();
+ m_rubberBand = false;
+
+ int x,y,xx,yy ;
+ event.GetPosition(&x,&y);
+ CalcUnscrolledPosition( x, y, &xx, &yy );
+
+ wxString str;
+ str.Printf( wxT("Rectangle selection from %d,%d to %d,%d"),
+ m_anchorpoint.x, m_anchorpoint.y , (int)xx, (int)yy );
+ wxMessageBox( str , wxT("Rubber-Banding") );
+
+ }
+}
+
// ----------------------------------------------------------------------------
// MyFrame
// ----------------------------------------------------------------------------
menuFile->Append(File_ShowBrushes, _T("&Brushes screen\tF4"));
menuFile->Append(File_ShowPolygons, _T("&Polygons screen\tF5"));
menuFile->Append(File_ShowMask, _T("&Mask screen\tF6"));
- menuFile->Append(File_ShowOps, _T("&ROP screen\tF7"));
+ menuFile->Append(File_ShowMaskStretch, _T("1/&2 scaled mask\tShift-F6"));
+ menuFile->Append(File_ShowOps, _T("&Raster operations screen\tF7"));
menuFile->Append(File_ShowRegions, _T("Re&gions screen\tF8"));
menuFile->Append(File_ShowCircles, _T("&Circles screen\tF9"));
#if wxUSE_GRAPHICS_CONTEXT
#endif
menuFile->Append(File_ShowSplines, _T("&Splines screen\tF11"));
menuFile->Append(File_ShowGradients, _T("&Gradients screen\tF12"));
+#if wxUSE_GRAPHICS_CONTEXT
+ menuFile->Append(File_ShowGraphics, _T("&Graphics screen"));
+#endif
menuFile->AppendSeparator();
menuFile->AppendCheckItem(File_Clip, _T("&Clip\tCtrl-C"), _T("Clip/unclip drawing"));
#if wxUSE_GRAPHICS_CONTEXT
void MyFrame::OnShow(wxCommandEvent& event)
{
- m_canvas->ToShow((ScreenToShow)(event.GetId() - MenuShow_First));
+ m_canvas->ToShow(event.GetId());
}
void MyFrame::OnOption(wxCommandEvent& event)
projects / wxWidgets.git / blobdiff