// Created: 14.08.00
// RCS-ID: $Id$
// Copyright: (c) 2000 SciTech Software, Inc. (www.scitechsoft.com)
-// Licence: wxWindows license
+// Licence: wxWindows licence
///////////////////////////////////////////////////////////////////////////////
#ifndef _WX_UNIV_SETUP_H_
// compatibility settings
// ----------------------------------------------------------------------------
-// This setting determines the compatibility with 1.68 API:
-// Level 0: no backward compatibility, all new features
-// Level 1: some extra methods are defined for compatibility.
-//
-// Default is 0.
-//
-// Recommended setting: 0 (in fact the compatibility code is now very minimal
-// so there is little advantage to setting it to 1.
-#define WXWIN_COMPATIBILITY 0
-
-// This setting determines the compatibility with 2.0 API: set it to 1 to
+// This setting determines the compatibility with 2.4 API: set it to 1 to
// enable it
//
// Default is 0.
//
// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2 0
+#define WXWIN_COMPATIBILITY_2_4 0
-// This setting determines the compatibility with 2.0 API: set it to 1 to
-// enable it
+// This setting determines the compatibility with 2.6 API: set it to 0 to
+// flag all cases of using deprecated functions.
//
-// Default is 1.
+// Default is 1 but please try building your code with 0 as the default will
+// change to 0 in the next version and the deprecated functions will disappear
+// in the version after it completely.
//
-// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2_2 0
-
-// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
-// but this is very dangerous because you can mistakenly pass an icon instead
-// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
-// because an icon is not a valid bitmap
-//
-// Starting from 2.1.12, you have the choice under this backwards compatible
-// behaviour (your code will still compile, but probably won't behave as
-// expected!) and not deriving wxIcon class from wxBitmap, but providing a
-// conversion ctor wxBitmap(const wxIcon&) instead.
-//
-// Recommended setting: 0
-#define wxICON_IS_BITMAP 0
-
-// Define as 1 for font size to be backward compatible to 1.63 and earlier.
-// 1.64 and later define point sizes to be compatible with Windows.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxFONT_SIZE_COMPATIBILITY 0
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_6 1
// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
// If migrating between versions, your dialogs may seem to shrink.
// Generic comment about debugging settings: they are very useful if you don't
// use any other memory leak detection tools such as Purify/BoundsChecker, but
// are probably redundant otherwise. Also, Visual C++ CRT has the same features
-// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
// may prefer to use it instead of built in memory debugging code because it is
// faster and more fool proof.
//
// Unicode support
// ----------------------------------------------------------------------------
-// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
// defined as wchar_t, wxString will use Unicode internally. If you set this
// to 1, you must use wxT() macro for all literal strings in the program.
//
// Default is 0
//
// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
-#define wxUSE_UNICODE 0
+#ifndef wxUSE_UNICODE
+ #define wxUSE_UNICODE 0
+#endif
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This
// setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
// http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you
// Default is 1
//
// Recommended setting: 1 for win32 else 0
-#if defined(__WIN32__)
+#if defined(__WIN32__) || defined(__WATCOMC__)
#define wxUSE_WCHAR_T 1
#else
#define wxUSE_WCHAR_T 0
// global features
// ----------------------------------------------------------------------------
+// Compile library in exception-safe mode? If set to 1, the library will try to
+// behave correctly in presence of exceptions (even though it still will not
+// use the exceptions itself) and notify the user code about any unhandled
+// exceptions. If set to 0, propagation of the exceptions through the library
+// code will lead to undefined behaviour -- but the code itself will be
+// slightly smaller and faster.
+//
+// Default is 1
+//
+// Recommended setting: depends on whether you intend to use C++ exceptions
+// in your own code (1 if you do, 0 if you don't)
+#define wxUSE_EXCEPTIONS 1
+
+// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
+// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
+// and for wxHashMap to be implemented with templates.
+//
+// Default is 0
+//
+// Recommended setting: YMMV
+#define wxUSE_STL 0
+
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_EXTENDED_RTTI 0
+
// Support for message/error logging. This includes wxLogXXX() functions and
// wxLog and derived classes. Don't set this to 0 unless you really know what
// you are doing.
// Recommended setting: 1 (always)
#define wxUSE_LOG 1
-// Support for command line parsing using wxCmdLineParser class.
-//
-// Default is 1
-//
-// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
-#define wxUSE_CMDLINE_PARSER 1
-
// Recommended setting: 1
#define wxUSE_LOGWINDOW 1
// Recommended setting: 1
#define wxUSE_LOG_DIALOG 1
+// Support for command line parsing using wxCmdLineParser class.
+//
+// Default is 1
+//
+// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
+#define wxUSE_CMDLINE_PARSER 1
+
// Support for multithreaded applications: if 1, compile in thread classes
// (thread.h) and make the library a bit more thread safe. Although thread
// support is quite stable by now, you may still consider recompiling the
// Recommended setting: 0 unless you do plan to develop MT applications
#define wxUSE_THREADS 1
-// If enabled (1), compiles wxWindows streams classes
+// If enabled (1), compiles wxWidgets streams classes
#define wxUSE_STREAMS 1
// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
#define wxUSE_STD_IOSTREAM 0
#endif
+// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
+// Note that if the system's implementation does not support positional
+// parameters, setting this to 1 forces the use of the wxWidgets implementation
+// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
+// many Unix systems but usually doesn't under Windows.
+//
+// Positional parameters are very useful when translating a program since using
+// them in formatting strings allow translators to correctly reorder the
+// translated sentences.
+//
+// Default is 1
+//
+// Recommended setting: 1 if you want to support multiple languages
+#define wxUSE_PRINTF_POS_PARAMS 0
+
// ----------------------------------------------------------------------------
// non GUI features selection
// ----------------------------------------------------------------------------
// Recommended setting: 1 (but may be safely disabled if you don't use it)
#define wxUSE_FSVOLUME 1
+// Use wxStandardPaths class which allows to retrieve some standard locations
+// in the file system
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be disabled to save space, but not much)
+#define wxUSE_STDPATHS 1
+
// use wxTextBuffer class: required by wxTextFile
#define wxUSE_TEXTBUFFER 1
// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
#define wxUSE_FS_ZIP 1
+// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_ARCHIVE 1
+
+// wxArchive classes for accessing archives such as zip and tar
+#define wxUSE_ARCHIVE_STREAMS 1
+
// Set to 1 to compile wxZipInput/OutputStream classes.
#define wxUSE_ZIPSTREAM 1
+// Set to 1 to compile wxTarInput/OutputStream classes.
+#define wxUSE_TARSTREAM 1
+
// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
-// wxUSE_LIBPNG.
-#define wxUSE_ZLIB 1
+// wxUSE_LIBPNG
+#define wxUSE_ZLIB 1
// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
#define wxUSE_FS_INET 1
// If enabled, the code written by Apple will be used to write, in a portable
// way, float on the disk. See extended.c for the license which is different
-// from wxWindows one.
+// from wxWidgets one.
//
// Default is 1.
//
// Recommended setting: 1
#define wxUSE_PROTOCOL 1
-// Define this to use wxURL class.
-#define wxUSE_URL 1
-
// The settings for the individual URL schemes
#define wxUSE_PROTOCOL_FILE 1
#define wxUSE_PROTOCOL_FTP 1
#define wxUSE_PROTOCOL_HTTP 1
+// Define this to use wxURL class.
+#define wxUSE_URL 1
+
+// Support for wxVariant class used in several places throughout the library,
+// notably in wxDataViewCtrl API.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you want to reduce the library size as much as
+// possible in which case setting this to 0 can gain up to 100KB.
+#define wxUSE_VARIANT 1
+
// Support for regular expression matching via wxRegEx class: enable this to
// use POSIX regular expressions in your code. You need to compile regex
// library from src/regex to use it under Windows.
// wxSystemOptions class
#define wxUSE_SYSTEM_OPTIONS 1
-// wxWave class
-#if defined(__WIN32__)
- #define wxUSE_WAVE 1
+// wxSound class
+#define wxUSE_SOUND 1
+
+// Use wxMediaCtrl
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_MEDIACTRL 1
+
+// Use QuickTime
+//
+// Default is 0
+//
+// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
+#define wxUSE_QUICKTIME 0
+
+// Use DirectShow
+//
+// Default is 0
+//
+// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
+#define wxUSE_DIRECTSHOW 0
+
+// Use wxWidget's XRC XML-based resource system. Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC 1
+
+// XML parsing classes. Note that their API will change in the future, so
+// using wxXmlDocument and wxXmlNode in your app is not recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (required by XRC)
+#if wxUSE_XRC
+# define wxUSE_XML 1
#else
- #define wxUSE_WAVE 1
+# define wxUSE_XML 0
+#endif
+
+// Use wxWidget's AUI docking system
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_AUI 1
+
+
+// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
+// 2D drawing API. (Still somewhat experimental)
+//
+// Please note that on Windows you will need to link with gdiplus.lib (use
+// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
+// application if you want it to be runnable on pre-XP systems.
+//
+// Default is 0
+//
+// Recommended setting: 1
+#ifndef wxUSE_GRAPHICS_CONTEXT
+#define wxUSE_GRAPHICS_CONTEXT 0
#endif
+// Set to 1 to compile MS Windows XP theme engine support
+#define wxUSE_UXTHEME 0
+
+// Set to 1 to auto-adapt to MS Windows XP themes where possible
+// (notably, wxNotebook pages)
+#define wxUSE_UXTHEME_AUTO 0
+
// ----------------------------------------------------------------------------
// Individual GUI controls
// ----------------------------------------------------------------------------
// Recommended setting: 1 (may be set to 0)
#define wxUSE_TIPWINDOW 1
-// Each of the settings below corresponds to one wxWindows control. They are
+// Each of the settings below corresponds to one wxWidgets control. They are
// all switched on by default but may be disabled if you are sure that your
// program (including any standard dialogs it can show!) doesn't need them and
// if you desperately want to save some space. If you use any of these you must
// Default is 1
//
// Recommended setting: 1
-#define wxUSE_BUTTON 1 // wxButton
-#define wxUSE_BMPBUTTON 1 // wxBitmapButton
-#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
-#define wxUSE_CHECKBOX 1 // wxCheckBox
-#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox
-#define wxUSE_CHOICE 1 // wxChoice
-#define wxUSE_COMBOBOX 1 // wxComboBox
-#define wxUSE_GAUGE 1 // wxGauge
-#define wxUSE_LISTBOX 1 // wxListBox
-#define wxUSE_LISTCTRL 1 // wxListCtrl
-#define wxUSE_RADIOBOX 1 // wxRadioBox
-#define wxUSE_RADIOBTN 1 // wxRadioButton
-#define wxUSE_SCROLLBAR 1 // wxScrollBar
-#define wxUSE_SLIDER 1 // wxSlider
-#define wxUSE_SPINBTN 1 // wxSpinButton
-#define wxUSE_SPINCTRL 1 // wxSpinCtrl
-#define wxUSE_STATBOX 1 // wxStaticBox
-#define wxUSE_STATLINE 1 // wxStaticLine
-#define wxUSE_STATTEXT 1 // wxStaticText
-#define wxUSE_STATBMP 1 // wxStaticBitmap
-#define wxUSE_TEXTCTRL 1 // wxTextCtrl
-#define wxUSE_TOGGLEBTN 0 // requires wxButton //? not supported in generic and wrong in msw
-#define wxUSE_TREECTRL 1 // wxTreeCtrl
+#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
+#define wxUSE_BUTTON 1 // wxButton
+#define wxUSE_BMPBUTTON 1 // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
+#define wxUSE_CHECKBOX 1 // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox
+#define wxUSE_CHOICE 1 // wxChoice
+#define wxUSE_COLLPANE 1 // wxCollapsiblePane
+#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
+#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
+#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
+#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
+#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
+#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
+#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
+#define wxUSE_LISTBOX 1 // wxListBox
+#define wxUSE_LISTCTRL 1 // wxListCtrl
+#define wxUSE_RADIOBOX 1 // wxRadioBox
+#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_SCROLLBAR 1 // wxScrollBar
+#define wxUSE_SLIDER 1 // wxSlider
+#define wxUSE_SPINBTN 1 // wxSpinButton
+#define wxUSE_SPINCTRL 1 // wxSpinCtrl
+#define wxUSE_STATBOX 1 // wxStaticBox
+#define wxUSE_STATLINE 1 // wxStaticLine
+#define wxUSE_STATTEXT 1 // wxStaticText
+#define wxUSE_STATBMP 1 // wxStaticBitmap
+#define wxUSE_TEXTCTRL 1 // wxTextCtrl
+#define wxUSE_TOGGLEBTN 1 // wxToggleButton
+#define wxUSE_TREECTRL 1 // wxTreeCtrl
// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
// below either wxStatusBar95 or a generic wxStatusBar will be used.
// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
// classes at all. Otherwise, use the native toolbar class unless
-// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
-// supports some features which might not be supported by the native wxToolBar
-// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+// wxUSE_TOOLBAR_NATIVE is 0.
//
// Default is 0 for all settings.
//
-// Recommended setting: 1 for wxUSE_TOOLBAR and 0 for wxUSE_TOOLBAR_NATIVE and
-// wxUSE_TOOLBAR_SIMPLE.
+// Recommended setting: 1 for wxUSE_TOOLBAR and 0 for wxUSE_TOOLBAR_NATIVE.
#define wxUSE_TOOLBAR 1
#define wxUSE_TOOLBAR_NATIVE 0
-#define wxUSE_TOOLBAR_SIMPLE 0
-
-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR 0
// wxNotebook is a control with several "tabs" located on one of its sides. It
// may be used ot logically organise the data presented to the user instead of
// Recommended setting: 1
#define wxUSE_NOTEBOOK 1
+// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_LISTBOOK 1
+
+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+
+// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TREEBOOK 1
+
+// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
+// tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLBOOK 1
+
// wxTabDialog is a generic version of wxNotebook but it is incompatible with
// the new class. It shouldn't be used in new code.
//
// Recommended setting: 0 (use wxNotebook)
#define wxUSE_TAB_DIALOG 0
-// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and
-// the new, much imporved and enhanced version. The new version is backwards
-// compatible with the old one and should be used whenever possible, i.e. if
-// you set wxUSE_GRID to 1, set wxUSE_NEW_GRID to 1 too.
+// wxGrid class
//
-// Default is 1 for both options.
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
//
-// Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using
-// wxGrid and 100% backwards compatibality (with all old wxGrid quirks) is
-// essential.
+// Recommended setting: 1
//
-// WIN16/BC++ resets wxUSE_NEW_GRID to 0 because it exceeds the data limit.
#define wxUSE_GRID 1
-#define wxUSE_NEW_GRID 1
// wxProperty[Value/Form/List] classes, used by Dialog Editor
#define wxUSE_PROPSHEET 1
+// wxComboCtrl and related classes: combobox with custom popup window and
+// not necessarily a listbox.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
+// it used by wxComboBox
+#define wxUSE_COMBOCTRL 1
+
+// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
+// items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0, except where it is
+// needed as a base class for generic wxBitmapComboBox.
+#define wxUSE_ODCOMBOBOX 1
+
+// wxBitmapComboBox a combobox that can have images in front of text items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0
+#define wxUSE_BITMAPCOMBOBOX 1
+
// ----------------------------------------------------------------------------
// Miscellaneous GUI stuff
// ----------------------------------------------------------------------------
// Recommended setting: 1 (can be safely set to 0, not used by the library)
#define wxUSE_CARET 1
+// Use wxDisplay class: it allows enumerating all displays on a system and
+// working with them.
+//
+// Default is 0 because it isn't yet implemented on all platforms
+//
+// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
+#define wxUSE_DISPLAY 0
+
// Miscellaneous geometry code: needed for Canvas library
#define wxUSE_GEOMETRY 0
// wxDC cacheing implementation
#define wxUSE_DC_CACHEING 1
+// Set this to 1 to enable the use of DIB's for wxBitmap to support
+// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
+#define wxUSE_DIB_FOR_BITMAP 0
+
// ----------------------------------------------------------------------------
// common dialogs
// ----------------------------------------------------------------------------
-// Define 1 to use generic dialogs in Windows, even though they duplicate
-// native common dialog (e.g. wxColourDialog). This is mainly useful for
-// testing.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxUSE_GENERIC_DIALOGS_IN_MSW 0
-
// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
// file selector, printer dialog). Switching this off also switches off the
// printing architecture and interactive wxPrinterDC.
// wizards
#define wxUSE_WIZARDDLG 1
+// Compile in wxAboutBox() function showing the standard "About" dialog.
+//
+// Default is 1
+//
+// Recommended setting: 1 but can be set to 0 to save some space if you don't
+// use this function
+#define wxUSE_ABOUTDLG 1
+
// ----------------------------------------------------------------------------
// Metafiles support
// ----------------------------------------------------------------------------
// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
//
// Recommended setting: default or 0 for everything for portable programs.
-#define wxUSE_METAFILE 0
-#define wxUSE_ENH_METAFILE 0
-#define wxUSE_WIN_METAFILES_ALWAYS 0
+#if defined(__WIN32__)
+ #define wxUSE_METAFILE 1
+ #define wxUSE_ENH_METAFILE 1
+ #define wxUSE_WIN_METAFILES_ALWAYS 0
+#else
+ #define wxUSE_METAFILE 0
+ #define wxUSE_ENH_METAFILE 0
+ #define wxUSE_WIN_METAFILES_ALWAYS 0
+#endif
// ----------------------------------------------------------------------------
// Big GUI components
// ----------------------------------------------------------------------------
+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 1
+
// Set to 0 to disable document/view architecture
#define wxUSE_DOC_VIEW_ARCHITECTURE 1
// Set to 0 to disable MDI document/view architecture
+//
+// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
#define wxUSE_MDI_ARCHITECTURE 1
// Set to 0 to disable print/preview architecture code
// smaller library.
#define wxUSE_HTML 1
-// OpenGL canvas
+// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
+// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
+// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
+// will need to manually add opengl32.lib and glu32.lib to the list of
+// libraries linked with your program if you use OpenGL.
+//
+// Default is 0.
+//
+// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
#if defined(__WIN32__)
- #define wxUSE_GLCANVAS 0 //? error unresolved external symbol ...
+ #define wxUSE_GLCANVAS 1
#else
#define wxUSE_GLCANVAS 0
#endif
+// wxRichTextCtrl allows editing of styled text.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 if you want compile a
+// smaller library.
+#define wxUSE_RICHTEXT 1
+
// wxTreeLayout class
#define wxUSE_TREELAYOUT 1
// Default is 1.
//
// Recommended setting: 1
-#define wxUSE_CLIPBOARD 0 //? needs wxUSE_OLE
+#define wxUSE_CLIPBOARD 1
// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
// drop
//
// Default is 1.
//
-// Recommended setting: 1
+// Recommended setting: 1 for WIN32
#define wxUSE_DATAOBJ 1
// Use wxDropTarget and wxDropSource classes for drag and drop (this is
//
// Recommended setting: 1
#if defined(__WIN32__)
- #define wxUSE_DRAG_AND_DROP 0 //? needs wxUSE_OLE
+ #define wxUSE_DRAG_AND_DROP 1
#else
#define wxUSE_DRAG_AND_DROP 0
#endif
+// Use wxAccessible for enhanced and customisable accessibility.
+// Depends on wxUSE_OLE.
+//
+// Default is 0.
+//
+// Recommended setting (at present): 0
+#define wxUSE_ACCESSIBILITY 0
+
// ----------------------------------------------------------------------------
// miscellaneous settings
// ----------------------------------------------------------------------------
// MS help
#define wxUSE_MS_HTML_HELP 1
-// Use wxHTML-based help controller?
+// Use wxHTML-based help controller
#define wxUSE_WXHTML_HELP 1
// Use resources
-#define wxUSE_RESOURCES 1
+#define wxUSE_RESOURCES 0
// Window layout constraint system
#define wxUSE_CONSTRAINTS 1
// Splines
#define wxUSE_SPLINES 1
-// Use XPM support in wxBitmap
-//
-// Default is 1, as XPM is now fully supported this makes easier the issue
-// of portable icons and bitmaps
-#if defined(__WIN32__)
- #define wxUSE_XPM_IN_MSW 1
-#else
- #define wxUSE_XPM_IN_MSW 0
-#endif
-
-// Use dynamic DIB loading/saving code in utils/dib under MSW.
-#if defined(__WIN32__)
- #define wxUSE_IMAGE_LOADING_IN_MSW 0 //? needs more testing
-#else
- #define wxUSE_IMAGE_LOADING_IN_MSW 0
-#endif
-
-// Use dynamic icon/cursor loading/saving code under MSW.
-#if defined(__WIN32__)
- #define wxUSE_RESOURCE_LOADING_IN_MSW 0 //? needs more testing
-#else
- #define wxUSE_RESOURCE_LOADING_IN_MSW 0
-#endif
-
-// use wxExpr (a.k.a. PrologIO)
-#define wxUSE_PROLOGIO 0
-
-// Use .wxr resource mechanism (requires PrologIO library)
-#define wxUSE_WX_RESOURCES 0
-
// Include mouse wheel support
#define wxUSE_MOUSEWHEEL 1
// Set to 1 to use font metric files in GetTextExtent
#define wxUSE_AFM_FOR_POSTSCRIPT 1
-// Set to 0 to disable PostScript print/preview architecture code under Windows
-// (just use Windows printing).
-#if defined(__WIN32__)
- #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
-#else
- #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
-#endif
-
// ----------------------------------------------------------------------------
// database classes
// ----------------------------------------------------------------------------
#define wxODBC_FWD_ONLY_CURSORS 0
// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
-// member variables. With a setting of 1, full backward compatability with the
+// member variables. With a setting of 1, full backward compatibility with the
// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
// as future development will be done only on the non-deprecated
// functions/classes/member variables/etc.
#define wxUSE_ICO_CUR 0
// Set to 1 to compile in wxPalette class
-#if defined(__WIN32__)
- #define wxUSE_PALETTE 1
-#else
- #define wxUSE_PALETTE 1
-#endif
+ #define wxUSE_PALETTE 1
// ----------------------------------------------------------------------------
// Windows-only settings
// ----------------------------------------------------------------------------
#if defined(__WINDOWS__)
-// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
// will override some other settings (see below)
//
// Default is 0.
//
// Default is 1.
//
-// Recommended setting: 1
-#define wxUSE_OLE 0 //? needs more testing
-
-// Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT
-// 3.x. This setting is ignored under Win9x and NT 4.0+.
-//
-// Default is 0 for (most) Win32 (systems), 1 for Win16
-//
-// Recommended setting: same as default
-#if defined(__WIN95__) //? wrong test, should be positive
- #define wxUSE_CTL3D 0
-#else
- #define wxUSE_CTL3D 0 //? see above
-#endif
+// Recommended setting: 1 for WIN32
+ #define wxUSE_OLE 1
-// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
-// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
-// miniframes support instead.
-//
-// Default is 0 for (most) Win32 (systems), 1 for Win16
-//
-// Recommended setting: same as default
-#if defined(__WIN95__) //? wrong test, should be positive
- #define wxUSE_ITSY_BITSY 0
+// Set to 0 to disable PostScript print/preview architecture code under Windows
+// (just use Windows printing).
+#if defined(__WIN32__)
+ #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
#else
- #define wxUSE_ITSY_BITSY 0 //? see above
+ #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
#endif
// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
//
// Recommended setting: 1, only set it to 0 if your compiler doesn't have
// or can't compile <richedit.h>
-#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__)
+#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
// TODO: This should be ifdef'ed for any compilers that don't support
// RichEdit 2.0 but do have RichEdit 1.0...
- #define wxUSE_RICHEDIT 0 //? needs more testing
- #define wxUSE_RICHEDIT2 0 //? needs more testing
+ #define wxUSE_RICHEDIT 0 // currently not supported
+ #define wxUSE_RICHEDIT2 0 // currently not supported
#else
#define wxUSE_RICHEDIT 0
// Recommended setting: 1, set to 0 for a small library size reduction
#define wxUSE_OWNER_DRAWN 0
-#endif
-
-// ----------------------------------------------------------------------------
-// disable the settings which don't work for some compilers
-// ----------------------------------------------------------------------------
-
-#ifndef wxUSE_NORLANDER_HEADERS
- #if (defined(__MINGW32__) || defined(__CYGWIN__)) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
- #define wxUSE_NORLANDER_HEADERS 1
- #else
- #define wxUSE_NORLANDER_HEADERS 0
- #endif
-#endif
-
-// wxUSE_DEBUG_NEW_ALWAYS doesn't work with CodeWarrior
-#if defined(__MWERKS__)
- #undef wxUSE_DEBUG_NEW_ALWAYS
- #define wxUSE_DEBUG_NEW_ALWAYS 0
-#endif
-
-#if defined(__GNUWIN32__)
-// These don't work as expected for mingw32 and cygwin32
- #undef wxUSE_MEMORY_TRACING
- #define wxUSE_MEMORY_TRACING 0
-
- #undef wxUSE_GLOBAL_MEMORY_OPERATORS
- #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-
- #undef wxUSE_DEBUG_NEW_ALWAYS
- #define wxUSE_DEBUG_NEW_ALWAYS 0
-
-// Cygwin betas don't have wcslen
- #if defined(__CYGWIN__) || defined(__CYGWIN32__)
- #if ! ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
- #undef wxUSE_WCHAR_T
- #define wxUSE_WCHAR_T 0
- #endif
- #endif
-
-#endif // __GNUWIN32__
-
-// MFC duplicates these operators
-#if wxUSE_MFC
- #undef wxUSE_GLOBAL_MEMORY_OPERATORS
- #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-
- #undef wxUSE_DEBUG_NEW_ALWAYS
- #define wxUSE_DEBUG_NEW_ALWAYS 0
-#endif // wxUSE_MFC
-
-#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !wxUSE_NORLANDER_HEADERS)
-// Can't use OLE drag and drop in Windows 3.1 because we don't know how
-// to implement UUIDs
-// GnuWin32 doesn't have appropriate headers for e.g. IUnknown.
- #undef wxUSE_DRAG_AND_DROP
- #define wxUSE_DRAG_AND_DROP 0
-#endif
-
-// Only WIN32 supports wxStatusBar95
-#if !defined(__WIN32__) && wxUSE_NATIVE_STATUSBAR
- #undef wxUSE_NATIVE_STATUSBAR
- #define wxUSE_NATIVE_STATUSBAR 0
-#endif
-
-// Salford C++ doesn't like some of the memory operator definitions
-#ifdef __SALFORDC__
- #undef wxUSE_MEMORY_TRACING
- #define wxUSE_MEMORY_TRACING 0
-
- #undef wxUSE_GLOBAL_MEMORY_OPERATORS
- #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-
- #undef wxUSE_DEBUG_NEW_ALWAYS
- #define wxUSE_DEBUG_NEW_ALWAYS 0
-
- #undef wxUSE_THREADS
- #define wxUSE_THREADS 0
-
- #undef wxUSE_OWNER_DRAWN
- #define wxUSE_OWNER_DRAWN 0
-#endif // __SALFORDC__
-
-#ifdef __TWIN32__
- #undef wxUSE_THREADS
- #define wxUSE_THREADS 0
-
- #undef wxUSE_ODBC
- #define wxUSE_ODBC 0
-#endif // __TWIN32__
-
-// BC++/Win16 can't cope with the amount of data in resource.cpp
-#if defined(__WIN16__) && defined(__BORLANDC__)
- #undef wxUSE_WX_RESOURCES
- #define wxUSE_WX_RESOURCES 0
-
- #undef wxUSE_ODBC
- #define wxUSE_ODBC 0
-
- #undef wxUSE_NEW_GRID
- #define wxUSE_NEW_GRID 0
-#endif
-
-#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
-// BC++ 4.0 can't compile JPEG library
- #undef wxUSE_LIBJPEG
- #define wxUSE_LIBJPEG 0
-#endif
-
-// wxUSE_DEBUG_NEW_ALWAYS = 1 not compatible with BC++ in DLL mode
-#if defined(__BORLANDC__) && (defined(WXMAKINGDLL) || defined(WXUSINGDLL))
- #undef wxUSE_DEBUG_NEW_ALWAYS
- #define wxUSE_DEBUG_NEW_ALWAYS 0
-#endif
-
-#if defined(__WXMSW__) && defined(__WATCOMC__)
- /*
- #undef wxUSE_GLCANVAS
- #define wxUSE_GLCANVAS 0
- */
+// Set this to 1 to be able to use wxCrashReport::Generate() to create mini
+// dumps of your program when it crashes (or at any other moment)
+//
+// Default is 1 if supported by the compiler (VC++ and recent BC++ only).
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_CRASHREPORT 1
- #undef wxUSE_WCHAR_T
- #define wxUSE_WCHAR_T 0
#endif
-#if defined(__WXMSW__) && !defined(__WIN32__)
- #undef wxUSE_SOCKETS
- #define wxUSE_SOCKETS 0
-
- #undef wxUSE_THREADS
- #define wxUSE_THREADS 0
-
- #undef wxUSE_TOOLTIPS
- #define wxUSE_TOOLTIPS 0
-
- #undef wxUSE_SPINCTRL
- #define wxUSE_SPINCTRL 0
-
- #undef wxUSE_SPINBTN
- #define wxUSE_SPINBTN 0
-
- #undef wxUSE_LIBPNG
- #define wxUSE_LIBPNG 0
-
- #undef wxUSE_LIBJPEG
- #define wxUSE_LIBJPEG 0
-
- #undef wxUSE_LIBTIFF
- #define wxUSE_LIBTIFF 0
-
- #undef wxUSE_GIF
- #define wxUSE_GIF 0
-
- #undef wxUSE_PNM
- #define wxUSE_PNM 0
-
- #undef wxUSE_PCX
- #define wxUSE_PCX 0
-
- #undef wxUSE_GLCANVAS
- #define wxUSE_GLCANVAS 0
-
- #undef wxUSE_MS_HTML_HELP
- #define wxUSE_MS_HTML_HELP 0
-
- #undef wxUSE_WCHAR_T
- #define wxUSE_WCHAR_T 0
-
-#endif // Win16
-
// ----------------------------------------------------------------------------
// unknown settings
// ----------------------------------------------------------------------------
-// Use serialization (requires utils/serialize)?
-#define wxUSE_SERIAL 0
-
-// Use plotter?
-#define wxUSE_PLOT 0
-
// If 1, enables provision of run-time type information.
// NOW MANDATORY: don't change.
#define wxUSE_DYNAMIC_CLASSES 1
-//??????
-#if defined(__WIN32__)
- #define wxUSE_DISPLAY 0
-#else
- #define wxUSE_DISPLAY 0
-#endif
-
//??????
#if defined(__WIN32__)
#define wxUSE_DDE_FOR_IPC 0
#define wxUSE_DDE_FOR_IPC 0
#endif
-//??????
-#define wxUSE_SPAWNBROWSER 0
-
#endif // _WX_UNIV_SETUP_H_
projects / wxWidgets.git / blobdiff