+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_AS"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3923: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ AS="false"
+fi
+fi
+
+
+ ;;
+
+esac
+
+# enable the --disable-libtool-lock switch
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ need_locks=$enableval
+else
+ need_locks=yes
+fi
+
+
+if test x"$need_locks" = xno; then
+ libtool_flags="$libtool_flags --disable-lock"
+fi
+
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+SEARCH_INCLUDE="\
+ /usr/Motif-1.2/include \
+ /usr/Motif-2.1/include \
+ \
+ /usr/include/Motif1.2 \
+ /opt/xpm/include/X11 \
+ \
+ /usr/Motif1.2/include \
+ /usr/dt/include \
+ /usr/include/Xm \
+ \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/X11R6/lib \
+ /usr/X11R5/lib \
+ /usr/X11R4/lib \
+ \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X11/include \
+ /usr/include/X11 \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/include/gtk \
+ /usr/include/gdk \
+ /usr/include/glib \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/local/include/gtk \
+ /usr/local/include/qt \
+ /usr/include/qt \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ "
+
+SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` "
+
+
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+# If we find X, set shell vars x_includes and x_libraries to the
+# paths, otherwise set no_x=yes.
+# Uses ac_ vars as temps to allow command line to override cache and checks.
+# --without-x overrides everything else, but does not touch the cache.
+echo $ac_n "checking for X""... $ac_c" 1>&6
+echo "configure:4104: checking for X" >&5
+
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+ withval="$with_x"
+ :
+fi
+
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+ # The user explicitly disabled X.
+ have_x=disabled
+else
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=NO ac_x_libraries=NO
+rm -fr conftestdir
+if mkdir conftestdir; then
+ cd conftestdir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat > Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl; do
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
+ ac_im_usrlibdir=$ac_im_libdir; break
+ fi
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case "$ac_im_incroot" in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+ esac
+ case "$ac_im_usrlibdir" in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftestdir
+fi
+
+if test "$ac_x_includes" = NO; then
+ # Guess where to find include files, by looking for this one X11 .h file.
+ test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+
+ # First, try using that file with no special directory specified.
+cat > conftest.$ac_ext <<EOF
+#line 4166 "configure"
+#include "confdefs.h"
+#include <$x_direct_test_include>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4171: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ # Look for the header file in a standard set of common directories.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ for ac_dir in \
+ /usr/X11/include \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11 \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11/include \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11 \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ ; \
+ do
+ if test -r "$ac_dir/$x_direct_test_include"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+ done
+fi
+rm -f conftest*
+fi # $ac_x_includes = NO
+
+if test "$ac_x_libraries" = NO; then
+ # Check for the libraries.
+
+ test -z "$x_direct_test_library" && x_direct_test_library=Xt
+ test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+
+ # See if we find them without any special options.
+ # Don't add to $LIBS permanently.
+ ac_save_LIBS="$LIBS"
+ LIBS="-l$x_direct_test_library $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4240 "configure"
+#include "confdefs.h"
+
+int main() {
+${x_direct_test_function}()
+; return 0; }
+EOF
+if { (eval echo configure:4247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
projects / wxWidgets.git / blobdiff