============================
-wxPython 2.5 Migration Guide
+wxPython 2.6 Migration Guide
============================
This document will help explain some of the major changes in wxPython
-2.5 and let you know what you need to do to adapt your programs to
-those changes. Be sure to also check in the CHANGES_ file like
-usual to see info about the not so major changes and other things that
-have been added to wxPython.
+2.6 since the 2.4 series and let you know what you need to do to adapt
+your programs to those changes. Be sure to also check in the CHANGES_
+file like usual to see info about the not so major changes and other
+things that have been added to wxPython.
.. _CHANGES: CHANGES.html
.. _here: http://www.wxwidgets.org/name.htm
This won't really affect wxPython all that much, other than the fact
-that the wxwindows.org domain name will be changing to wxwidgets.org,
-so mail list, CVS, and etc. addresses will be changing. We're going
+that the wxwindows.org domain name has changed to wxwidgets.org,
+so mail list, CVS, and etc. addresses have also changed. We're going
to try and smooth the transition as much as possible, but I wanted you
all to be aware of this change if you run into any issues.
operation unless you first have created an app object, (even on
Windows where most anything was possible before.)
+**[Changed in 2.5.2.x]** All the Window and GDI (pen, bitmap, etc.)
+class constructors and also many toplevel functions and static methods
+will now check that a wx.App object has already been created and will
+raise a wx.PyNoAppError exception if not.
+
+
SWIG 1.3
distribution.) This has some far reaching ramifications:
All classes derive from object and so all are now "new-style
- classes"
+ classes." This also allows you to use mixin classes that are
+ new-style and to use properties, staticmethod, etc.
Public data members of the C++ classes are wrapped as Python
- properties using property() instead of using __getattr__/__setattr__
- like before. Normally you shouldn't notice any difference, but if
- you were previously doing something with __getattr__/__setattr__
- in derived classes then you may have to adjust things.
-
- Static C++ methods are wrapped using the staticmethod()
- feature of Python and so are accessible as ClassName.MethodName
- as expected. They are still available as top level functions
+ properties using property() instead of using
+ __getattr__/__setattr__ hacks like before. Normally you shouldn't
+ notice any difference, but if you were previously doing something
+ with __getattr__/__setattr__ in derived classes then you may have
+ to adjust things.
+
+ Static C++ methods are wrapped using the staticmethod() feature of
+ Python and so are accessible as ClassName.MethodName as expected.
+ They are still also available as top level functions named like
ClassName_MethodName as before.
The relationship between the wxFoo and wxFooPtr classes have
changed for the better. Specifically, all instances that you see
- will be wxFoo even if they are created internally using wxFooPtr,
- because wxFooPtr.__init__ will change the instance's __class__ as
+ will be wx.Foo even if they are created internally using wx.FooPtr,
+ because wx.FooPtr.__init__ will change the instance's __class__ as
part of the initialization. If you have any code that checks
- class type using something like isinstance(obj, wxFooPtr) you will
- need to change it to isinstance(obj, wxFoo).
+ class type using something like isinstance(obj, wx.FooPtr) you will
+ need to change it to isinstance(obj, wx.Foo).
If you create your own custom event types and EVT_* functions, and you
want to be able to use them with the Bind method above then you should
-change your EVT_* to be an instance of wxPyEventBinder instead of a
+change your EVT_* to be an instance of wx.PyEventBinder instead of a
function. For example, if you used to have something like this::
myCustomEventType = wxNewEventType()
The second parameter is an integer in [0, 1, 2] that specifies the
number of IDs that are needed to be passed to Connect.
+**[Changed in 2.5.2.x]** There is also an Unbind method added to
+wx.EvtHandler that can be used to disconenct event handlers. It looks
+like this::
+
+ def Unbind(self, event, source=None, id=wx.ID_ANY, id2=wx.ID_ANY):
+ """
+ Disconencts the event handler binding for event from self.
+ Returns True if successful.
+ """
2.4, the compatibility modules are generated at build time and contain
assignment statements like this::
- wxWindow = wx.core.Window
+ wxWindow = wx._core.Window
-Don't let the "core" in the name bother you. That and some other
+Don't let the "_core" in the name bother you. That and some other
modules are implementation details, and everything that was in the
wxPython.wx module before will still be in the wx package namespace
-after this change. So from your code you would use it as wx.Window.
+after this change. So from your code you would use it as wx.Window or
+wxWindow if you import from the wxPython.wx module.
A few notes about how all of this was accomplished might be
interesting... SWIG is now run twice for each module that it is
New wx.DC Methods
-----------------
-Many of the Draw methods of wx.DC have alternate forms in C++ that take
-wxPoint or wxSize parameters (let's call these *Type A*) instead of
-the individual x, y, width, height, etc. parameters (and we'll call
-these *Type B*). In the rest of the library I normally made the *Type
-A* forms of the methods be the default method with the "normal" name,
-and had renamed the *Type B* forms of the methods to some similar
-name. For example in wx.Window we have these Python methods::
-
- SetSize(size) # Type A
- SetSizeWH(width, height) # Type B
-
-
-For various reasons the new *Type A* methods in wx.DC were never added
-and the existing *Type B* methods were never renamed. Now that lots
-of other things are also changing in wxPython it has been decided that
-it is a good time to also do the method renaming in wx.DC too in order
-to be consistent with the rest of the library. The methods in wx.DC
-that are affected are listed here::
-
- FloodFillXY(x, y, colour, style = wx.FLOOD_SURFACE)
- FloodFill(point, colour, style = wx.FLOOD_SURFACE)
-
- GetPixelXY(x, y)
- GetPixel(point)
+**[Changed in 2.5.2.x]** In wxPython 2.5.1.5 there was a new
+implementation of the wx.DC Draw and other methods that broke
+backwards compatibility in the name of consistency. That change has
+been reverted and the wx.DC Draw methods with 2.4 compatible
+signatures have been restored. In addition a new set of methods have
+been added that take wx.Point and/or wx.Size parameters instead of
+separate integer parameters. The Draw and etc. methods now available
+in the wx.DC class are::
- DrawLineXY(x1, y1, x2, y2)
- DrawLine(point1, point2)
- CrossHairXY(x, y)
- CrossHair(point)
+ FloodFill(self, x, y, colour, style = wx.FLOOD_SURFACE)
+ FoodFillPoint(self, pt, colour, style = wx.FLOOD_SURFACE)
- DrawArcXY(x1, y1, x2, y2, xc, yc)
- DrawArc(point1, point2, center)
-
- DrawCheckMarkXY(x, y, width, height)
- DrawCheckMark(rect)
-
- DrawEllipticArcXY(x, y, w, h, start_angle, end_angle)
- DrawEllipticArc(point, size, start_angle, end_angle)
-
- DrawPointXY(x, y)
- DrawPoint(point)
-
- DrawRectangleXY(x, y, width, height)
- DrawRectangle(point, size)
- DrawRectangleRect(rect)
+ GetPixel(self, x,y)
+ GetPixelPoint(self, pt)
+
+ DrawLine(self, x1, y1, x2, y2)
+ DrawLinePoint(self, pt1, pt2)
- DrawRoundedRectangleXY(x, y, width, height, radius)
- DrawRoundedRectangle(point, size, radius)
- DrawRoundedRectangleRect(rect, radius)
+ CrossHair(self, x, y)
+ CrossHairPoint(self, pt)
- DrawCircleXY(x, y, radius)
- DrawCircle(point, radius)
+ DrawArc(self, x1, y1, x2, y2, xc, yc)
+ DrawArcPoint(self, pt1, pt2, centre)
- DrawEllipseXY(x, y, width, height)
- DrawEllipse(point, size)
- DrawEllipseRect(rect)
+ DrawCheckMark(self, x, y, width, height)
+ DrawCheckMarkRect(self, rect)
- DrawIconXY(icon, x, y)
- DrawIcon(icon, point)
+ DrawEllipticArc(self, x, y, w, h, sa, ea)
+ DrawEllipticArcPointSize(self, pt, sz, sa, ea)
- DrawBitmapXY(bmp, x, y, useMask = FALSE)
- DrawBitmap(bmp, point, useMask = FALSE)
+ DrawPoint(self, x, y)
+ DrawPointPoint(self, pt)
- DrawTextXY(text, x, y)
- DrawText(text, point)
+ DrawRectangle(self, x, y, width, height)
+ DrawRectangleRect(self, rect)
+ DrawRectanglePointSize(self, pt, sz)
- DrawRotatedTextXY(text, x, y, angle)
- DrawRotatedText(text, point, angle)
+ DrawRoundedRectangle(self, x, y, width, height, radius)
+ DrawRoundedRectangleRect(self, r, radius)
+ DrawRoundedRectanglePointSize(self, pt, sz, radius)
-
- BlitXY(xdest, ydest, width, height, sourceDC, xsrc, ysrc,
- rop = wxCOPY, useMask = FALSE, xsrcMask = -1, ysrcMask = -1)
- Blit(destPt, size, sourceDC, srcPt,
- rop = wxCOPY, useMask = FALSE, srcPtMask = wx.DefaultPosition)
+ DrawCircle(self, x, y, radius)
+ DrawCirclePoint(self, pt, radius)
- SetClippingRegionXY(x, y, width, height)
- SetClippingRegion(point, size)
- SetClippingRect(rect)
- SetClippingRegionAsRegion(region);
+ DrawEllipse(self, x, y, width, height)
+ DrawEllipseRect(self, rect)
+ DrawEllipsePointSize(self, pt, sz)
-
-If you have code that draws on a DC and you are using the new wx
-namespace then you **will** get errors because of these changes, but
-it should be easy to fix the code. You can either change the name of
-the *Type B* method called to the names shown above, or just add
-parentheses around the parameters as needed to turn them into tuples
-and let the SWIG typemaps turn them into the wx.Point or wx.Size
-object that is expected. Then you will be calling the new *Type A*
-method. For example, if you had this code before::
+ DrawIcon(self, icon, x, y)
+ DrawIconPoint(self, icon, pt)
- dc.DrawRectangle(x, y, width, height)
+ DrawBitmap(self, bmp, x, y, useMask = False)
+ DrawBitmapPoint(self, bmp, pt, useMask = False)
-You could either continue to use the *Type B* method by changing the
-name to DrawRectangleXY, or just change it to the new *Type A* by
-adding some parentheses like this::
+ DrawText(self, text, x, y)
+ DrawTextPoint(self, text, pt)
- dc.DrawRectangle((x, y), (width, height))
+ DrawRotatedText(self, text, x, y, angle)
+ DrawRotatedTextPoint(self, text, pt, angle)
-Or if you were already using a point and size like this::
+ bool Blit(self, xdest, ydest, width, height, sourceDC, xsrc, ysrc,
+ rop = wx.COPY, useMask = False, xsrcMask = -1, ysrcMask = -1)
+ BlitPointSize(self, destPt, sz, sourceDC, srcPt, rop = wx.COPY,
+ useMask = False, srcPtMask = wxDefaultPosition)
- dc.DrawRectangle(p.x, p.y, s.width, s.height)
-Then you can just simplify it like this::
+ SetClippingRegion(self, x, y, width, height)
+ SetClippingRegionPointSize(self, pt, sz)
+ SetClippingRegionAsRegion(self, region)
+ SetClippingRect(self, rect)
- dc.DrawRectangle(p, s)
-Now before you start yelling and screaming at me for breaking all your
-code, take note that up above I said, "...using the new wx
-namespace..." That's because if you are still importing from
-wxPython.wx then there are some classes defined there with Draw and
-etc. methods that have 2.4 compatible signatures. Unfortunately there
-is one exception to this behaviour. If a DC is returned from a
-function or method then an instance of the new class (with the new
-methods described above) will be returned instead of the compatibility
-class. If/When the old wxPython.wx namespace is removed then these
-compatibility classes will be removed too so you should plan on
-migrating to the new namespace and new DC Draw methods before that
-time.
wxPython's setup.py script now expects to use existing libraries for
the contribs (gizmos, stc, xrc, etc.) rather than building local
copies of them. If you build your own copies of wxPython please be
-aware that you now need to also build the ogl, stc, xrc, and gizmos
-libraries in addition to the main wx lib.
+aware that you now need to also build the stc, xrc, animate and gizmos
+libraries in addition to the main wx lib.
The wxPython.h and other header files are now in
.../wxPython/include/wx/wxPython instead of in wxPython/src. You
------
The hack allowing the old "option" keyword parameter has been removed.
-If you use keyword args with w.xSizer Add, Insert, or Prepend methods
-then you will need to use the ``proportion`` name instead of ``option``.
+If you use keyword args with wx.Sizer Add, Insert, or Prepend methods
+then you will need to use the ``proportion`` name instead of
+``option``. (The ``proportion`` keyword was also allowed in 2.4.2.4.)
When adding a spacer to a sizer you now need to use a wx.Size or a
2-integer sequence instead of separate width and height parameters.
-This allows for more consistency in how you add the various types of
-items to a sizer. The first parameter defines the item (instead of
-the possibily first two, depending on if you are doing a spacer or
-not,) and that item can either be a window, a sizer or a spacer (which
-can be a sequence or a wx.Size.)
+This was optionally allowed in 2.4, but now it is required. This
+allows for more consistency in how you add the various types of items
+to a sizer. The first parameter defines the item (instead of the
+possibily first two, depending on if you are doing a spacer or not,)
+and that item can either be a window, a sizer or a spacer (which can
+be a sequence or a wx.Size.) Removing the option for separate width
+and height parameters greatly simplified the wrapper code.
The wx.GridBagSizer class (very similar to the RowColSizer in the
library) has been added to C++ and wrapped for wxPython. It can also
You should not use AddWindow, AddSizer, AddSpacer (and similar for
Insert, Prepend, and etc.) methods any longer. Just use Add and the
-wrappers will figure out what to do.
+wrappers will figure out what to do. **[Changed in 2.5.2.x]**
+AddWindow, AddSizer, AddSpacer and etc. will now issue a
+DeprecationWarning. **[Changed in 2.5.4.x]** These methods have now
+been undeprecated at the request of Riaan Booysen, the Boa Constructor
+team lead. They are now just simple compatibility aliases for Add,
+and etc.
+
+**[Changed in 2.5.2.x]** The Sizers have had some fundamental internal
+changes in the 2.5.2.x release intended to make them do more of the
+"Right Thing" but also be as backwards compatible as possible.
+First a bit about how things used to work:
+
+ * The size that a window had when Add()ed to the sizer was assumed
+ to be its minimal size, and that size would always be used by
+ default when calculating layout size and positions, and the
+ sizer itself would keep track of that minimal size.
+
+ * If the window item was added with the ``wx.ADJUST_MINSIZE``
+ flag then when layout was calculated the item's ``GetBestSize``
+ would be used to reset the minimal size that the sizer used.
+
+The main thrust of the new Sizer changes was to make behavior like
+``wx.ADJUST_MINSIZE`` be the default, and also to push the tracking of
+the minimal size to the window itself (since it knows its own needs)
+instead of having the sizer take care of it. Consequently these
+changes were made:
+
+ * The ``wx.FIXED_MINSIZE`` flag was added to allow for the old
+ behavior. When this flag is used the size a window has when
+ added to the sizer will be treated as its minimal size and it
+ will not be readjusted on each layout.
+
+ * The min size stored in ``wx.Window`` and settable with
+ ``SetSizeHints`` or ``SetMinSize`` will by default be used by
+ the sizer (if it was set) as the minimal size of the sizer item.
+ If the min size was not set (or was only partially set) then the
+ window's best size is fetched and it is used instead of (or
+ blended with) the min size. ``wx.Window.GetBestFittingSize``
+ was added to facilitate getting the size to be used by the
+ sizers.
+
+ * The best size of a window is cached so it doesn't need to
+ recaculated on every layout. ``wx.Window.InvalidateBestSize``
+ was added and should be called (usually just internally in
+ control methods) whenever something is done that would make the
+ best size change.
+
+ * All wxControls were changed to set the minsize to what is passed
+ to the constructor or Create method, and also to set the real
+ size of the control to the blending of the min size and best
+ size. ``wx.Window.SetBestFittingSize`` was added to help with
+ this, although most controls don't need to call it directly
+ because it is called indirectly via the ``SetInitialSize``
+ called in the base classes.
+
+At this time, the only situation known not to work the same as before
+is the following::
+
+ win = SomeWidget(parent)
+ win.SetSize(SomeNonDefaultSize)
+ sizer.Add(win)
+
+In this case the old code would have used the new size as the minimum,
+but now the sizer will use the default size as the minimum rather than
+the size set later. It is an easy fix though, just move the
+specification of the size to the constructor (assuming that SomeWidget
+will set its minsize there like the rest of the controls do) or call
+``SetMinSize`` instead of ``SetSize``.
+
+In order to fit well with this new scheme of things, all wxControls or
+custom controls should do the following things. (Depending on how
+they are used you may also want to do the same thing for non-control
+custom windows.)
+
+ * Either override or inherit a meaningful ``DoGetBestSize`` method
+ that calculates whatever size is "best" for the control. Once
+ that size is calculated then there should normally be a call to
+ ``CacheBestSize`` to save it for later use, unless for some
+ reason you want the best size to be recalculated on every
+ layout.
+
+ Note: In order to successfully override ``DoGetBestSize`` in
+ Python the class needs to be derived from ``wx.PyWindow``,
+ ``wx.PyControl``, or etc. If your class instead derives from
+ one of the standard wx classes then just be sure that the min
+ size gets explicitly set to what would have been the best size
+ and things should work properly in almost all situations.
+
+ * Any method that changes the attributes of the control such that
+ the best size will change should call ``InvalidateBestSize`` so
+ it will be recalculated the next time it is needed.
+
+ * The control's constructor and/or Create method should ensure
+ that the minsize is set to the size passed in, and that the
+ control is sized to a blending of the min size and best size.
+ This can be done by calling ``SetBestFittingSize``.
-**[Changed in 2.5.1.6]** wx.ADJUST_MINSIZE is now the default
-behaviour for window items in sizers. This means that the item's
-GetMinSize and/or GetBestSize will be called when calculating layout
-and the return value from that will be used for the minimum size. The
-wx.FIXED_MINSIZE flag was added that will cause the sizer to *not*
-call window methods to determine the new best size, instead the
-minsize that the window had when added to the sizer (or the size the
-window was created with) will always be used. When a window is added
-to a sizer it's initial size, if any, is set as the window's minimal
-size using SetSizeHints if there isn't already a minimal size.
PlatformInfo
+
+PNG Images
+----------
+
+Prior to 2.5 the PNG image handler would convert all alpha channel
+information to a mask when the image was loaded. Pixels that were
+more than halfway transparent would be made fully transparent by the
+mask and the rest would be made fully opaque.
+
+In 2.5 the image handler has been updated to preserve the alpha
+channel and will now only create a mask when all the pixels in the
+image are either fully transparent or fully opaque. In addition, the
+wx.DC.DrawBitmap and wx.DC.Blit methods are able to correctly blend
+the pixels in the image with partially transparent alpha values.
+
+If you are using a PNG with an alpha channel but you need to have a
+wx.Mask like you automatically got in 2.4 then you can do one of the
+following:
+
+ * Edit the image and make all the partially transparent pixels be
+ fully transparent.
+
+ * Use a different image type.
+
+ * Set a mask based on colour after you load the image.
+
+
+
+OGL is dead! LONG LIVE OGL!
+---------------------------
+
+**[Changed in 2.5.2.x]**
+
+The wx.ogl module was deprecated in version 2.5.2 in favor of the new
+Python port of the OGL library located at wx.lib.ogl contributed by
+Pierre Hjälm. Starting in version 2.5.5 the old ogl is no longer
+being built in the distributed binaries, however the source code is
+still in the source tree so people can built it themselves if desired.
+
+The reason this changes was done was to greatly extend the life of OGL
+within wxPython by making it more easily maintainable and less prone
+to getting rusty as there seems to be less and less interest in
+maintaining the C++ version.
+
+There are only a few known compatibility issues at this time. First
+is the location of OGL. The old version was located in the
+wx.ogl module, and the new version is in the wx.lib.ogl package. So
+this just means that to start using the new version you need to adjust
+your imports. So if your code currently has something like this::
+
+ import wx
+ import wx.ogl as ogl
+
+Then just change it to this::
+
+ import wx
+ import wx.lib.ogl as ogl
+
+The other compatibility issue deals with removing a wart in the
+original API that was necessary in order to allow overloaded methods
+in derived classes to call the same method in the base class when
+using the old SWIG. Instead dedaling with the wart you can now just
+call the base class method like you woudl for any other Python class.
+For example, if you had to do something like this previously::
+
+ class MyDividedShape(ogl.DividedShape):
+ ...
+ def OnSizingEndDragLeft(self, pt, x, y, keys, attch):
+ self.base_OnSizingEndDragLeft(pt, x, y, keys, attch)
+ ...
+
+You will need to change it to be like this::
+
+ class MyDividedShape(ogl.DividedShape):
+ ...
+ def OnSizingEndDragLeft(self, pt, x, y, keys, attch):
+ ogl.DividedShape.OnSizingEndDragLeft(self, pt, x, y, keys, attch)
+ ...
+
+
+
Obsolete Modules
----------------
the "internal" module names have changed, but you shouldn't have been
using them anyway so it shouldn't bother you. ;-) In case you were
erroneously using them in 2.4, here are the internal extension modules
-no longer exist:
+that no longer exist:
* clip_dnd
* cmndlgs
* windows3
They have been replaced by the following, but please remember that
-these are just "implementation details" and you shoudl reall be using
-the objects in these modules via the wx or wxPython.wx packages:
+these are just "implementation details" and you should really be using
+the objects in these modules only via the wx or wxPython.wx packages:
* _core
* _gdi
+wx.TaskBarIcon
+--------------
+
+**[Changed in 2.5.3.x]**
+
+wx.TaskbarIcon now works on all three platforms, although for wxGTK it
+depends on support from the Window Manager. On OS X the icon replaces
+the application's icon on the dock and when you right click on it the
+app's default popup menu is merged with the wx.TaskBarIcon's menu.
+Because of how it is implemented on the Mac using the Dock most of the
+TaskBarIcon events will _not_ be emitted on that platform, but since
+98% of the time you simply want to display an icon and have a popup
+menu it shouldn't be much of a problem. You can still use the other
+events on the other platforms, you'll just want to be sure that you
+can do everything you want via the menu too.
+
+Since popping up a menu is the most common thing to do with a
+TaskBarIcon the class has some new built in functionality to
+facilitate that. To use the TaskBarIcon in this new way, simply
+derive a new class from TaskBarIcon and implement a CreatePopupMenu
+method that creates and returns the menu. That's all there is to it,
+besides binding event handlers for the menu items of course. Take a
+look at the DemoTaskBarIcon class in the demo/Main.py module for an
+example.
+
+**NOTE**: Unfortunately due to being able to support virtualizing
+CreatePopupMenu the C++ TaskBarIcon instance now holds a reference to
+the Python instance, and so you will need to explicitly Destroy() your
+TaskBarIcon instance when you are done with it. (Like you do with
+wx.Dialogs.) If you don't destroy it then wxWidgets will assume that
+you want the app to keep running with just the icon in the task bar
+and the MainLoop will not exit.
+
+
+
+Version Number Change
+---------------------
+
+**[Changed in 2.5.3.x]**
+
+Starting with 2.5.3.0 the Unicode versions of wxPython will no longer
+have a 'u' appended to the fourth component of the version number.
+Please check for the presence of "unicode" in the `wx.PlatformInfo`
+tuple instead. (This tuple of strings has been available since the
+first 2.5 version.) For example::
+
+ if "unicode" in wx.PlatformInfo:
+ # do whatever
+ ...
+
+
-Other Stuff
------------
+
+Multi-Version Installs
+----------------------
+
+**[Changed in 2.5.3.x]**
+
+Starting with 2.5.3.0 the wx and wxPython package directories will be
+installed in a subdirectory of the site-packages directory, instead of
+directly in site-packages. This is done to help facilitate having
+multiple versions of wxPython installed side-by-side. Why would you
+want to do this? One possible scenario is you have an app that
+requires wxPython 2.4 but you want to use the newest 2.5 to do your
+own development with. Or perhaps you want to be able to test your app
+with several different versions of wxPython to ensure compatibility.
+Before everyone panics, rest asured that if you only install one
+version of wxPython then you should notice no difference in how things
+work.
+
+In addition to installing wxPython into a "versioned" subdirectory of
+site-packages, a file named `wx.pth` is optionally installed that will
+contain the name of the versioned subdirectory. This will cause that
+subdirectory to be automatically added to the sys.path and so doing an
+"import wx" will find the package in the subdirectory like it would
+have if it was still located directly in site-packages. I say
+"optionally" above because that is how you can control which install
+of wxPython is the default one. Which ever version installs the
+wx.pth file will be the one that is imported with a plain "import wx"
+statement. Of course you can always manipulate that by editing the
+wx.pth file, or by setting PYTHONPATH in the environment, or by the
+method described in the next paragraph.
+
+Finally, a new module named wxversion.py is installed to the
+site-packages directory. It can be used to manipulate the sys.path at
+runtime so your applications can select which version of wxPython they
+would like to to have imported. You use it like this::
+
+ import wxversion
+ wxversion.select("2.4")
+ import wx
+
+Then even though a 2.5 version of wxPython may be the default the
+application that does the above the first time that wx is imported
+will actually get a 2.4 version. **NOTE:** There isn't actually a 2.4
+version of wxPython that supports this, but there will be.
+
+Please see this wiki page for more details, HowTo's and FAQ's:
+http://wiki.wxpython.org/index.cgi/MultiVersionInstalls
+
+
+
+
+Miscellaneous Stuff
+-------------------
wxPyDefaultPosition and wxPyDefaultSize are gone. Use the
wxDefaultPosition and wxDefaultSize objects instead.
Use None instead of the ancient and should have been removed a long
time ago wx.NULL alias.
-wx.TreeCtrl no longer needs to be passed the cookie variable as the
-2nd parameter. It still returns it though, for use with GetNextChild.
+wx.TreeCtrl.GetFirstChild no longer needs to be passed the cookie
+variable as the 2nd parameter. It still returns it though, for use
+with GetNextChild.
The wx.NO_FULL_REPAINT_ON_RESIZE style is now the default style for
all windows. The name still exists for compatibility, but it is set
The wxWave class has been renamed to wxSound, and now has a slightly
different API.
-wx.TaskbarIcon works on wxGTK-based platforms now, however you have to
-manage it a little bit more than you did before. Basically, the app
-will treat it like a top-level frame in that if the wx.TaskBarIcon
-still exists when all the frames are closed then the app will still
-not exit. You need to ensure that the wx.TaskBarIcon is destroyed
-when your last Frame is closed. For wxPython apps it is usually
-enough if your main frame object holds the only reference to the
-wx.TaskBarIcon, then when the frame is closed Python reference
-counting takes care of the rest.
-
Before Python 2.3 it was possible to pass a floating point object as a
parameter to a function that expected an integer, and the
PyArg_ParseTuple family of functions would automatically convert to
integer by truncating the fractional portion of the number. With
Python 2.3 that behavior was deprecated and a deprecation warning is
raised when you pass a floating point value, (for example, calling
-wx.DC.DrawLineXY with floats for the position and size,) and lots of
+wx.DC.DrawLine with floats for the position and size,) and lots of
developers using wxPython had to scramble to change their code to call
int() before calling wxPython methods. Recent changes in SWIG have
moved the conversion out of PyArg_ParseTuple to custom code that SWIG
convert itself to one. A similar conversion fragment is in place for
parameters that expect floating point values.
-**[Changed in 2.5.1.6]** The MaskedEditCtrl modules have been moved
+**[Changed in 2.5.2.x]** The MaskedEditCtrl modules have been moved
to their own sub-package, wx.lib.masked. See the docstrings and demo
for changes in capabilities, usage, etc.
+**[Changed in 2.5.2.x]** wx.MaskColour constructor has been deprecated
+and will raise a DeprecationWarning if used. The main wx.Mask
+constructor has been modified to be compatible with wx.MaskColour so
+you should use it instead.
+
+**[Changed in 2.5.2.x]** In wx.TextCtrls that have the
+wx.TE_PROCESS_TAB style the TAB key will be treated like an ordinary
+character and will not cause any tab traversal navigation at all. If
+you use this style but would still like to have the normal tab
+traversal take place then you should send your own
+wx.NavigationKeyEvent from the wx.EVT_KEY_DOWN handler. There is a
+new Navigate method in the wx.Window class to help send the event and
+it is used something like this::
+
+ flags = wx.NavigationKeyEvent.IsForward
+ if event.ShiftDown():
+ flags = wx.NavigationKeyEvent.IsBackward
+ if event.ControlDown():
+ flags |= wx.NavigationKeyEvent.WinChange
+ self.Navigate(flags)
+
+
projects / wxWidgets.git / blobdiff