for a range of text in a wxTextCtrl or wxRichTextCtrl.
When setting up a wxTextAttr object, pass a bitlist mask to
- wxTextAttr::SetFlags to
- indicate which style elements should be changed. As a convenience, when you
- call a setter such
- as SetFont, the relevant bit will be set.
+ wxTextAttr::SetFlags to indicate which style elements should be changed. As
+ a convenience, when you call a setter such as SetFont, the relevant bit
+ will be set.
@library{wxcore}
@category{richtext}
/**
Gets the font attributes from the given font, using only the attributes
- specified by @e flags.
+ specified by @a flags.
*/
bool GetFontAttributes(const wxFont& font,
int flags = wxTEXT_ATTR_FONT);
//@{
/**
Creates a new @c wxTextAttr which is a merge of @a base and
- @e overlay. Properties defined in @a overlay take precedence over those
- in @e base. Properties undefined/invalid in both are undefined in the
+ @a overlay. Properties defined in @a overlay take precedence over those
+ in @a base. Properties undefined/invalid in both are undefined in the
result.
*/
void Merge(const wxTextAttr& overlay);
//@}
/**
- Sets the paragraph alignment. These are the possible values for @e alignment:
+ Sets the paragraph alignment. These are the possible values for @a alignment:
Of these, wxTEXT_ALIGNMENT_JUSTIFIED is unimplemented. In future justification
may be supported
void operator operator=(const wxTextAttr& attr);
};
+/**
+ Describes the possible return values of wxTextCtrl::HitTest().
+
+ The element names correspond to the relationship between the point asked
+ for and the character returned, e.g. @c wxTE_HT_BEFORE means that the point
+ is before (leftward or upward) it and so on.
+ */
+enum wxTextCtrlHitTestResult
+{
+ /// Indicates that wxTextCtrl::HitTest() is not implemented on this
+ /// platform.
+ wxTE_HT_UNKNOWN = -2,
+
+ /// The point is before the character returned.
+ wxTE_HT_BEFORE,
+
+ /// The point is directly on the character returned.
+ wxTE_HT_ON_TEXT,
+
+ /// The point is below the last line of the control.
+ wxTE_HT_BELOW,
+
+ /// The point is beyond the end of line containing the character returned.
+ wxTE_HT_BEYOND
+};
/**
@class wxTextCtrl
@wxheader{textctrl.h}
- A text control allows text to be displayed and edited. It may be
- single line or multi-line.
+ A text control allows text to be displayed and edited.
+
+ It may be single line or multi-line.
@beginStyleTable
@style{wxTE_PROCESS_ENTER}
capitalized.
@endStyleTable
+
+ @section textctrl_text_format wxTextCtrl Text Format
+
+ The multiline text controls always store the text as a sequence of lines
+ separated by @c '\\n' characters, i.e. in the Unix text format even on
+ non-Unix platforms. This allows the user code to ignore the differences
+ between the platforms but at a price: the indices in the control such as
+ those returned by GetInsertionPoint() or GetSelection() can @b not be used
+ as indices into the string returned by GetValue() as they're going to be
+ slightly off for platforms using @c "\\r\\n" as separator (as Windows
+ does).
+
+ Instead, if you need to obtain a substring between the 2 indices obtained
+ from the control with the help of the functions mentioned above, you should
+ use GetRange(). And the indices themselves can only be passed to other
+ methods, for example SetInsertionPoint() or SetSelection().
+
+ To summarize: never use the indices returned by (multiline) wxTextCtrl as
+ indices into the string it contains, but only as arguments to be passed
+ back to the other wxTextCtrl methods. This problem doesn't arise for
+ single-line platforms however where the indices in the control do
+ correspond to the positions in the value string.
+
+
+ @section textctrl_styles wxTextCtrl Styles.
+
+ Multi-line text controls support styling, i.e. provide a possibility to set
+ colours and font for individual characters in it (note that under Windows
+ @c wxTE_RICH style is required for style support). To use the styles you
+ can either call SetDefaultStyle() before inserting the text or call
+ SetStyle() later to change the style of the text already in the control
+ (the first solution is much more efficient).
+
+ In either case, if the style doesn't specify some of the attributes (for
+ example you only want to set the text colour but without changing the font
+ nor the text background), the values of the default style will be used for
+ them. If there is no default style, the attributes of the text control
+ itself are used.
+
+ So the following code correctly describes what it does: the second call to
+ SetDefaultStyle() doesn't change the text foreground colour (which stays
+ red) while the last one doesn't change the background colour (which stays
+ grey):
+
+ @code
+ text->SetDefaultStyle(wxTextAttr(*wxRED));
+ text->AppendText("Red text\n");
+ text->SetDefaultStyle(wxTextAttr(wxNullColour, *wxLIGHT_GREY));
+ text->AppendText("Red on grey text\n");
+ text->SetDefaultStyle(wxTextAttr(*wxBLUE);
+ text->AppendText("Blue on grey text\n");
+ @endcode
+
+
+ @section textctrl_cpp_streams wxTextCtrl and C++ Streams
+
+ This class multiply-inherits from @c std::streambuf (except for some really
+ old compilers using non-standard iostream library), allowing code such as
+ the following:
+
+ @code
+ wxTextCtrl *control = new wxTextCtrl(...);
+
+ ostream stream(control)
+
+ stream << 123.456 << " some text\n";
+ stream.flush();
+ @endcode
+
+ Note that even if your compiler doesn't support this (the symbol
+ @c wxHAS_TEXT_WINDOW_STREAM has value of 0 then) you can still use
+ wxTextCtrl itself in a stream-like manner:
+
+ @code
+ wxTextCtrl *control = new wxTextCtrl(...);
+
+ *control << 123.456 << " some text\n";
+ @endcode
+
+ However the possibility to create an ostream associated with wxTextCtrl may
+ be useful if you need to redirect the output of a function taking an
+ ostream as parameter to a text control.
+
+ Another commonly requested need is to redirect @c std::cout to the text
+ control. This may be done in the following way:
+
+ @code
+ #include <iostream>
+
+ wxTextCtrl *control = new wxTextCtrl(...);
+
+ std::streambuf *sbOld = std::cout.rdbuf();
+ std::cout.rdbuf(control);
+
+ // use cout as usual, the output appears in the text control
+ ...
+
+ std::cout.rdbuf(sbOld);
+ @endcode
+
+ But wxWidgets provides a convenient class to make it even simpler so
+ instead you may just do
+
+ @code
+ #include <iostream>
+
+ wxTextCtrl *control = new wxTextCtrl(...);
+
+ wxStreamToTextRedirector redirect(control);
+
+ // all output to cout goes into the text control until the exit from
+ // current scope
+ @endcode
+
+ See wxStreamToTextRedirector for more details.
+
+
+ @section textctrl_event_handling Event Handling.
+
+ The following commands are processed by default event handlers in
+ wxTextCtrl: @c wxID_CUT, @c wxID_COPY, @c wxID_PASTE, @c wxID_UNDO, @c
+ wxID_REDO. The associated UI update events are also processed
+ automatically, when the control has the focus.
+
+ To process input from a text control, use these event handler macros to
+ direct input to member functions that take a wxCommandEvent argument.
+
+ @beginEventTable{wxCommandEvent}
+ @event{EVT_TEXT(id, func)}
+ Respond to a wxEVT_COMMAND_TEXT_UPDATED event, generated when the text
+ changes. Notice that this event will be sent when the text controls
+ contents changes -- whether this is due to user input or comes from the
+ program itself (for example, if SetValue() is called); see
+ ChangeValue() for a function which does not send this event.} This
+ event is however not sent during the control creation.
+
+ @event{EVT_TEXT_ENTER(id, func)}
+ Respond to a wxEVT_COMMAND_TEXT_ENTER event, generated when enter is
+ pressed in a text control which must have wxTE_PROCESS_ENTER style for
+ this event to be generated.
+
+ @event{EVT_TEXT_URL(id, func}}
+ A mouse event occurred over an URL in the text control (wxMSW and
+ wxGTK2 only currently).
+
+ @event{EVT_TEXT_MAXLEN(id, func}}
+ This event is generated when the user tries to enter more text into the
+ control than the limit set by SetMaxLength(), see its description.
+ @endEventTable
+
@library{wxcore}
@category{ctrl}
- @appearance{textctrl.png}
+ <!-- @appearance{textctrl.png} -->
@see wxTextCtrl::Create, wxValidator
*/
Window name.
@remarks The horizontal scrollbar (wxHSCROLL style flag) will only be
- created for multi-line text controls. Without a
- horizontal scrollbar, text lines that don't fit in the
- control's size will be wrapped (but no newline
- character is inserted). Single line controls don't have
- a horizontal scrollbar, the text is automatically
- scrolled so that the insertion point is always visible.
+ created for multi-line text controls. Without a horizontal
+ scrollbar, text lines that don't fit in the control's size will be
+ wrapped (but no newline character is inserted). Single line
+ controls don't have a horizontal scrollbar, the text is
+ automatically scrolled so that the insertion point is always
+ visible.
@see Create(), wxValidator
*/
Text to write to the text control.
@remarks After the text is appended, the insertion point will be at the
- end of the text control. If this behaviour is not
- desired, the programmer should use GetInsertionPoint
- and SetInsertionPoint.
+ end of the text control. If this behaviour is not desired, the
+ programmer should use GetInsertionPoint and SetInsertionPoint.
@see WriteText()
*/
void AppendText(const wxString& text);
/**
- Call this function to enable auto-completion of the text typed in a single-line
- text control using the given @e choices.
- Notice that currently this function is only implemented in wxGTK2 and wxMSW
- ports and does nothing under the other platforms.
+ Call this function to enable auto-completion of the text typed in a
+ single-line text control using the given @a choices.
+
+ Notice that currently this function is only implemented in wxGTK2 and
+ wxMSW ports and does nothing under the other platforms.
@since 2.9.0
- @returns @true if the auto-completion was enabled or @false if the
- operation failed, typically because auto-completion is
- not supported by the current platform.
+ @return
+ @true if the auto-completion was enabled or @false if the operation
+ failed, typically because auto-completion is not supported by the
+ current platform.
@see AutoCompleteFileNames()
*/
bool AutoComplete(const wxArrayString& choices);
/**
- Call this function to enable auto-completion of the text typed in a single-line
- text control using all valid file system paths.
- Notice that currently this function is only implemented in wxGTK2 port and does
- nothing under the other platforms.
+ Call this function to enable auto-completion of the text typed in a
+ single-line text control using all valid file system paths.
+
+ Notice that currently this function is only implemented in wxGTK2 port
+ and does nothing under the other platforms.
@since 2.9.0
- @returns @true if the auto-completion was enabled or @false if the
- operation failed, typically because auto-completion is
- not supported by the current platform.
+ @return
+ @true if the auto-completion was enabled or @false if the operation
+ failed, typically because auto-completion is not supported by the
+ current platform.
@see AutoComplete()
*/
/**
Returns @true if the contents of the clipboard can be pasted into the
- text control. On some platforms (Motif, GTK) this is an approximation
- and returns @true if the control is editable, @false otherwise.
+ text control.
+
+ On some platforms (Motif, GTK) this is an approximation and returns
+ @true if the control is editable, @false otherwise.
*/
virtual bool CanPaste();
/**
- Returns @true if there is a redo facility available and the last operation
- can be redone.
+ Returns @true if there is a redo facility available and the last
+ operation can be redone.
*/
virtual bool CanRedo();
/**
- Returns @true if there is an undo facility available and the last operation
- can be undone.
+ Returns @true if there is an undo facility available and the last
+ operation can be undone.
*/
virtual bool CanUndo();
/**
- Sets the text value and marks the control as not-modified (which means that
- IsModified() would return @false immediately
- after the call to SetValue).
- Note that this function will not generate the @c wxEVT_COMMAND_TEXT_UPDATED
- event.
- This is the only difference with SetValue().
+ Sets the text value and marks the control as not-modified (which means
+ that IsModified() would return @false immediately after the call to
+ SetValue).
+
+ This functions does not generate the @c wxEVT_COMMAND_TEXT_UPDATED
+ event but otherwise is identical to SetValue().
See @ref overview_progevent "this topic" for more information.
@since 2.7.1
@param value
- The new value to set. It may contain newline characters if the text control
- is multi-line.
+ The new value to set. It may contain newline characters if the text
+ control is multi-line.
*/
virtual void ChangeValue(const wxString& value);
/**
Clears the text in the control.
+
Note that this function will generate a @c wxEVT_COMMAND_TEXT_UPDATED
- event.
+ event, i.e. its effect is identical to calling @c SetValue("").
*/
virtual void Clear();
/**
- Copies the selected text to the clipboard under Motif and MS Windows.
+ Copies the selected text to the clipboard.
*/
virtual void Copy();
/**
- Creates the text control for two-step construction. Derived classes
- should call or replace this function. See wxTextCtrl()
- for further details.
+ Creates the text control for two-step construction.
+
+ This method should be called if the default constructor was used for
+ the control creation. Its parameters have the same meaning as for the
+ non-default constructor.
*/
bool Create(wxWindow* parent, wxWindowID id,
const wxString& value = "",
virtual void Cut();
/**
- Resets the internal 'modified' flag as if the current edits had been saved.
+ Resets the internal modified flag as if the current changes had been
+ saved.
*/
void DiscardEdits();
/**
- This functions inserts into the control the character which would have been
- inserted if the given key event had occurred in the text control. The
- @a event object should be the same as the one passed to @c EVT_KEY_DOWN
- handler previously by wxWidgets.
- Please note that this function doesn't currently work correctly for all keys
- under any platform but MSW.
+ This functions inserts into the control the character which would have
+ been inserted if the given key event had occurred in the text control.
+
+ The @a event object should be the same as the one passed to @c
+ EVT_KEY_DOWN handler previously by wxWidgets. Please note that this
+ function doesn't currently work correctly for all keys under any
+ platform but MSW.
- @returns @true if the event resulted in a change to the control, @false
- otherwise.
+ @return
+ @true if the event resulted in a change to the control, @false
+ otherwise.
*/
bool EmulateKeyPress(const wxKeyEvent& event);
const wxTextAttr GetDefaultStyle() const;
/**
- Returns the insertion point. This is defined as the zero based index of the
- character position to the right of the insertion point. For example, if
- the insertion point is at the end of the text control, it is equal to
- both GetValue().Length() and
- GetLastPosition().
- The following code snippet safely returns the character at the insertion
- point or the zero character if the point is at the end of the control.
+ Returns the insertion point, or cursor, position.
+
+ This is defined as the zero based index of the character position to
+ the right of the insertion point. For example, if the insertion point
+ is at the end of the single-line text control, it is equal to both
+ GetLastPosition() and GetValue().length() (but notice that the latter
+ equality is not necessarily true for multiline edit controls which may
+ use multiple new line characters).
*/
virtual long GetInsertionPoint() const;
virtual wxTextPos GetLastPosition() const;
/**
- Gets the length of the specified line, not including any trailing newline
- character(s).
+ Gets the length of the specified line, not including any trailing
+ newline character(s).
@param lineNo
Line number (starting from zero).
- @returns The length of the line, or -1 if lineNo was invalid.
+ @return
+ The length of the line, or -1 if @a lineNo was invalid.
*/
int GetLineLength(long lineNo) const;
@param lineNo
The line number, starting from zero.
- @returns The contents of the line.
+ @return
+ The contents of the line.
*/
wxString GetLineText(long lineNo) const;
int GetNumberOfLines() const;
/**
- Returns the string containing the text starting in the positions @a from and
- up to @a to in the control. The positions must have been returned by another
- wxTextCtrl method.
+ Returns the string containing the text starting in the positions
+ @a from and up to @a to in the control.
+
+ The positions must have been returned by another wxTextCtrl method.
Please note that the positions in a multiline wxTextCtrl do @b not
- correspond to the indices in the string returned by
- GetValue() because of the different new line
- representations (@c CR or @c CR LF) and so this method should be used to
- obtain the correct results instead of extracting parts of the entire value. It
- may also be more efficient, especially if the control contains a lot of data.
+ correspond to the indices in the string returned by GetValue() because
+ of the different new line representations (@c CR or @c CR LF) and so
+ this method should be used to obtain the correct results instead of
+ extracting parts of the entire value. It may also be more efficient,
+ especially if the control contains a lot of data.
*/
virtual wxString GetRange(long from, long to) const;
/**
- Gets the current selection span. If the returned values are equal, there was
- no selection.
- Please note that the indices returned may be used with the other wxTextctrl
- methods but don't necessarily represent the correct indices into the string
- returned by GetValue() for multiline controls
- under Windows (at least,) you should use
- GetStringSelection() to get the selected
- text.
+ Gets the current selection span.
+
+ If the returned values are equal, there was no selection. Please note
+ that the indices returned may be used with the other wxTextCtrl methods
+ but don't necessarily represent the correct indices into the string
+ returned by GetValue() for multiline controls under Windows (at least,)
+ you should use GetStringSelection() to get the selected text.
@param from
The returned first position.
virtual void GetSelection(long* from, long* to) const;
/**
- Gets the text currently selected in the control. If there is no selection, the
- returned string is empty.
+ Gets the text currently selected in the control.
+
+ If there is no selection, the returned string is empty.
*/
virtual wxString GetStringSelection();
/**
- Returns the style at this position in the text control. Not all platforms
- support this function.
+ Returns the style at this position in the text control.
+
+ Not all platforms support this function.
- @returns @true on success, @false if an error occurred - it may also mean
- that the styles are not supported under this platform.
+ @return
+ @true on success, @false if an error occurred (this may also mean
+ that the styles are not supported under this platform).
@see SetStyle(), wxTextAttr
*/
bool GetStyle(long position, wxTextAttr& style);
/**
- Gets the contents of the control. Notice that for a multiline text control,
- the lines will be separated by (Unix-style) \n characters, even
- under Windows where they are separated by a \r\n
- sequence in the native control.
+ Gets the contents of the control.
+ Notice that for a multiline text control, the lines will be separated
+ by (Unix-style) @c \\n characters, even under Windows where they are
+ separated by a @c \\r\\n sequence in the native control.
*/
wxString GetValue() const;
/**
- This function finds the character at the specified position expressed in
- pixels. If the return code is not @c wxTE_HT_UNKNOWN the row and column
- of the character closest to this position are returned in the @a col and
- @a row parameters (unless the pointers are @NULL which is allowed).
- Please note that this function is currently only implemented in wxUniv,
- wxMSW and wxGTK2 ports.
+ This function finds the character at the specified position expressed
+ in pixels.
+
+ If the return code is not @c wxTE_HT_UNKNOWN the row and column of the
+ character closest to this position are returned in the @a col and @a
+ row parameters (unless the pointers are @NULL which is allowed). Please
+ note that this function is currently only implemented in wxUniv, wxMSW
+ and wxGTK2 ports.
@see PositionToXY(), XYToPosition()
*/
wxTextCoord row) const;
/**
- Returns @true if the controls contents may be edited by user (note that it
- always can be changed by the program), i.e. if the control hasn't been put in
- read-only mode by a previous call to
- SetEditable().
+ Returns @true if the controls contents may be edited by user (note that
+ it always can be changed by the program).
+
+ In other words, this functions returns @true if the control hasn't been
+ put in read-only mode by a previous call to SetEditable().
*/
bool IsEditable() const;
/**
- Returns @true if the control is currently empty. This is the same as
- @c GetValue().empty() but can be much more efficient for the multiline
- controls containing big amounts of text.
+ Returns @true if the control is currently empty.
+
+ This is the same as @c GetValue().empty() but can be much more
+ efficient for the multiline controls containing big amounts of text.
@since 2.7.1
*/
bool IsEmpty() const;
/**
- Returns @true if the text has been modified by user. Note that calling
- SetValue() doesn't make the control modified.
+ Returns @true if the text has been modified by user.
+
+ Note that calling SetValue() doesn't make the control modified.
@see MarkDirty()
*/
@param fileType
The type of file to load. This is currently ignored in wxTextCtrl.
- @returns @true if successful, @false otherwise.
+ @return
+ @true if successful, @false otherwise.
*/
bool LoadFile(const wxString& filename,
int fileType = wxTEXT_TYPE_ANY);
void MarkDirty();
/**
- This event handler function implements default drag and drop behaviour, which
- is to load the first dropped file into the control.
+ This event handler function implements default drag and drop behaviour,
+ which is to load the first dropped file into the control.
@param event
The drop files event.
@param y
Receives zero based line number.
- @returns @true on success, @false on failure (most likely due to a too
- large position parameter).
+ @return
+ @true on success, @false on failure (most likely due to a too large
+ position parameter).
@see XYToPosition()
*/
bool PositionToXY(long pos, long* x, long* y) const;
/**
- If there is a redo facility and the last operation can be redone, redoes the
- last operation. Does nothing
- if there is no redo facility.
+ If there is a redo facility and the last operation can be redone,
+ redoes the last operation.
+
+ Does nothing if there is no redo facility.
*/
virtual void Redo();
/**
- Removes the text starting at the first given position up to (but not including)
- the character at the last position.
+ Removes the text starting at the first given position up to (but not
+ including) the character at the last position.
@param from
The first position.
virtual void Remove(long from, long to);
/**
- Replaces the text starting at the first position up to (but not including)
- the character at the last position with the given text.
+ Replaces the text starting at the first position up to (but not
+ including) the character at the last position with the given text.
@param from
The first position.
@param fileType
The type of file to save. This is currently ignored in wxTextCtrl.
- @returns @true if the operation was successful, @false otherwise.
+ @return
+ @true if the operation was successful, @false otherwise.
*/
bool SaveFile(const wxString& filename,
int fileType = wxTEXT_TYPE_ANY);
/**
- Changes the default style to use for the new text which is going to be added
- to the control using WriteText() or
- AppendText().
+ Changes the default style to use for the new text which is going to be
+ added to the control using WriteText() or AppendText().
+
If either of the font, foreground, or background colour is not set in
- @e style, the values of the previous default style are used for them. If
- the previous default style didn't set them neither, the global font or colours
- of the text control itself are used as fall back.
- However if the @a style parameter is the default wxTextAttr, then the
- default style is just reset (instead of being combined with the new style which
+ @a style, the values of the previous default style are used for them.
+ If the previous default style didn't set them neither, the global font
+ or colours of the text control itself are used as fall back. However if
+ the @a style parameter is the default wxTextAttr, then the default
+ style is just reset (instead of being combined with the new style which
wouldn't change it at all).
@param style
The style for the new text.
- @returns @true on success, @false if an error occurred - may also mean that
- the styles are not supported under this platform.
+ @return
+ @true on success, @false if an error occurred (this may also mean
+ that the styles are not supported under this platform).
@see GetDefaultStyle()
*/
bool SetDefaultStyle(const wxTextAttr& style);
/**
- Makes the text item editable or read-only, overriding the @b wxTE_READONLY flag.
+ Makes the text item editable or read-only, overriding the
+ @b wxTE_READONLY flag.
@param editable
- If @true, the control is editable. If @false, the control is read-only.
+ If @true, the control is editable. If @false, the control is
+ read-only.
@see IsEditable()
*/
virtual void SetInsertionPoint(long pos);
/**
- Sets the insertion point at the end of the text control. This is equivalent
- to wxTextCtrl::SetInsertionPoint(wxTextCtrl::GetLastPosition()).
+ Sets the insertion point at the end of the text control.
+
+ This is equivalent to calling wxTextCtrl::SetInsertionPoint() with
+ wxTextCtrl::GetLastPosition() argument.
*/
virtual void SetInsertionPointEnd();
/**
- This function sets the maximum number of characters the user can enter into the
- control. In other words, it allows to limit the text value length to @e len
- not counting the terminating @c NUL character.
- If @a len is 0, the previously set max length limit, if any, is discarded
- and the user may enter as much text as the underlying native text control
- widget supports (typically at least 32Kb).
- If the user tries to enter more characters into the text control when it
- already is filled up to the maximal length, a
- @c wxEVT_COMMAND_TEXT_MAXLEN event is sent to notify the program about it
- (giving it the possibility to show an explanatory message, for example) and the
- extra input is discarded.
- Note that under GTK+, this function may only be used with single line text
- controls.
+ This function sets the maximum number of characters the user can enter
+ into the control.
+
+ In other words, it allows to limit the text value length to @a len not
+ counting the terminating @c NUL character. If @a len is 0, the
+ previously set max length limit, if any, is discarded and the user may
+ enter as much text as the underlying native text control widget
+ supports (typically at least 32Kb). If the user tries to enter more
+ characters into the text control when it already is filled up to the
+ maximal length, a @c wxEVT_COMMAND_TEXT_MAXLEN event is sent to notify
+ the program about it (giving it the possibility to show an explanatory
+ message, for example) and the extra input is discarded. Note that in
+ wxGTK this function may only be used with single line text controls.
*/
virtual void SetMaxLength(unsigned long len);
/**
Selects the text starting at the first position up to (but not
- including) the character at the last position. If both parameters are
- equal to -1 all text in the control is selected.
+ including) the character at the last position.
+
+ If both parameters are equal to -1 all text in the control is selected.
@param from
The first position.
virtual void SelectAll();
/**
- Changes the style of the given range. If any attribute within @a style is
- not set, the corresponding attribute from GetDefaultStyle() is used.
+ Changes the style of the given range.
+
+ If any attribute within @a style is not set, the corresponding
+ attribute from GetDefaultStyle() is used.
@param start
The start of the range to change.
@param style
The new style for the range.
- @returns @true on success, @false if an error occurred - it may also mean
- that the styles are not supported under this platform.
+ @return
+ @true on success, @false if an error occurred (this may also mean
+ that the styles are not supported under this platform).
@see GetStyle(), wxTextAttr
*/
bool SetStyle(long start, long end, const wxTextAttr& style);
/**
- Sets the text value and marks the control as not-modified (which means that
- IsModified() would return @false immediately
- after the call to SetValue).
- Note that this function will generate a @c wxEVT_COMMAND_TEXT_UPDATED
- event.
- This function is deprecated and should not be used in new code. Please use the
- ChangeValue() function instead.
+ Sets the text value and marks the control as not-modified (which means
+ that IsModified() would return @false immediately after the call to
+ SetValue).
+
+ Note that this function generates a @c wxEVT_COMMAND_TEXT_UPDATED
+ event, to avoid this you can use ChangeValue() instead.
@param value
- The new value to set. It may contain newline characters if the text control
- is multi-line.
+ The new value to set. It may contain newline characters if the text
+ control is multi-line.
*/
virtual void SetValue(const wxString& value);
void ShowPosition(long pos);
/**
- If there is an undo facility and the last operation can be undone, undoes the
- last operation. Does nothing
- if there is no undo facility.
+ If there is an undo facility and the last operation can be undone,
+ undoes the last operation.
+
+ Does nothing if there is no undo facility.
*/
virtual void Undo();
Text to write to the text control.
@remarks Newlines in the text string are the only control characters
- allowed, and they will cause appropriate line breaks.
- See () and AppendText() for more
- convenient ways of writing to the window.
+ allowed, and they will cause appropriate line breaks. See () and
+ AppendText() for more convenient ways of writing to the window.
*/
void WriteText(const wxString& text);
@param y
The line number.
- @returns The position value, or -1 if x or y was invalid.
+ @return
+ The position value, or -1 if x or y was invalid.
*/
long XYToPosition(long x, long y);
//@{
/**
- Operator definitions for appending to a text control, for example:
+ Operator definitions for appending to a text control.
+
+ These operators can be used as with the standard C++ streams, for
+ example:
+ @code
+ wxTextCtrl *wnd = new wxTextCtrl(my_frame);
+
+ (*wnd) << "Welcome to text control number " << 1 << ".\n";
+ @endcode
*/
- wxTextCtrl operator(const wxString& s);
- wxTextCtrl operator(int i);
- wxTextCtrl operator(long i);
- wxTextCtrl operator(float f);
- wxTextCtrl operator(double d);
- wxTextCtrl operator(char c);
+
+ wxTextCtrl& operator<<(const wxString& s);
+ wxTextCtrl& operator<<(int i);
+ wxTextCtrl& operator<<(long i);
+ wxTextCtrl& operator<<(float f);
+ wxTextCtrl& operator<<(double d);
+ wxTextCtrl& operator<<(char c);
+ wxTextCtrl& operator<<(wchar_t c);
//@}
};
{
public:
/**
- The constructor starts redirecting output sent to @a ostr or @e cout for
- the default parameter value to the text control @e text.
+ The constructor starts redirecting output sent to @a ostr or @a cout for
+ the default parameter value to the text control @a text.
@param text
The text control to append output too, must be non-@NULL
projects / wxWidgets.git / blobdiff