don't call wxYield() from EnsureVisible(), this is too dangerous - and unnecessary...

[wxWidgets.git] / docs / latex / wx / config.tex

diff --git a/docs/latex/wx/config.tex b/docs/latex/wx/config.tex
index 7b6e150960694ce1b227444f9d2dd4e89e39b38c..d1fb2ddf83874240863c42e390e0d183258b7bb6 100644 (file)
--- a/docs/latex/wx/config.tex
+++ b/docs/latex/wx/config.tex
@@ -1,7 +1,7 @@
 \section{\class{wxConfigBase}}\label{wxconfigbase}
 
 wxConfigBase class defines the basic interface of all config classes. It can
 \section{\class{wxConfigBase}}\label{wxconfigbase}
 
 wxConfigBase class defines the basic interface of all config classes. It can

-not be used by itself (it's an abstract base class) and you'll always use one
+not be used by itself (it is an abstract base class) and you will always use one

 of its derivations: wxIniConfig, wxFileConfig, wxRegConfig or any other.
 
 However, usually you don't even need to know the precise nature of the class
 of its derivations: wxIniConfig, wxFileConfig, wxRegConfig or any other.
 
 However, usually you don't even need to know the precise nature of the class


@@ -17,6 +17,9 @@ wxFileConfig otherwise.
 See \helpref{config overview}{wxconfigoverview} for the descriptions of all
 features of this class.
 
 See \helpref{config overview}{wxconfigoverview} for the descriptions of all
 features of this class.
 

+It is highly recommended to use static functions {\it Get()} and/or {\it Set()}, 
+so please have a \helpref{look at them.}{wxconfigstaticfunctions}
+

 \wxheading{Derived from}
 
 No base class
 \wxheading{Derived from}
 
 No base class


@@ -50,7 +53,7 @@ Here is how you would typically use this class:
 
   // another example: using default values and the full path instead of just
   // key name: if the key is not found , the value 17 is returned
 
   // another example: using default values and the full path instead of just
   // key name: if the key is not found , the value 17 is returned

-  long value = config->Read("/LastRun/CalculatedValues/MaxValue", -1);
+  long value = config->Read("/LastRun/CalculatedValues/MaxValue", 17);

   ...
   ...
   ...
   ...
   ...
   ...


@@ -75,7 +78,7 @@ physical storage where a wxConfigBase-derived class stores its data.
 
 \latexignore{\rtfignore{\wxheading{Function groups}}}
 
 
 \latexignore{\rtfignore{\wxheading{Function groups}}}
 

-\membersection{Static functions}
+\membersection{Static functions}\label{wxconfigstaticfunctions}

 
 These functions deal with the "default" config object. Although its usage is
 not at all mandatory it may be convenient to use a global config object
 
 These functions deal with the "default" config object. Although its usage is
 not at all mandatory it may be convenient to use a global config object


@@ -93,6 +96,11 @@ you may forget about calling {\it Set()}. When {\it Get()} is called and there
 is no current object, it will create one using {\it Create()} function. To
 disable this behaviour {\it DontCreateOnDemand()} is provided.
 
 is no current object, it will create one using {\it Create()} function. To
 disable this behaviour {\it DontCreateOnDemand()} is provided.
 

+{\bf Note:} You should use either {\it Set()} or {\it Get()} because wxWindows
+library itself would take advantage of it and could save various information
+in it. For example \helpref{wxFontMapper}{wxfontmapper} or Unix version
+of \helpref{wxFileDialog}{wxfiledialog} have ability to use wxConfig class.
+

 \helpref{Set}{wxconfigbaseset}\\
 \helpref{Get}{wxconfigbaseget}\\
 \helpref{Create}{wxconfigbasecreate}\\
 \helpref{Set}{wxconfigbaseset}\\
 \helpref{Get}{wxconfigbaseget}\\
 \helpref{Create}{wxconfigbasecreate}\\


@@ -110,7 +118,7 @@ support a file system-like hierarchy of keys (files) and groups (directories).
 As in the file system case, to specify a key in the config class you must use
 a path to it. Config classes also support the notion of the current group,
 which makes it possible to use the relative paths. To clarify all this, here
 As in the file system case, to specify a key in the config class you must use
 a path to it. Config classes also support the notion of the current group,
 which makes it possible to use the relative paths. To clarify all this, here

-is an example (it's only for the sake of demonstration, it doesn't do anything
+is an example (it is only for the sake of demonstration, it doesn't do anything

 sensible!):
 
 \begin{verbatim}
 sensible!):
 
 \begin{verbatim}


@@ -131,11 +139,11 @@ sensible!):
 
   wxASSERT( conf->Read("Subgroup/SubgroupEntry", 0l) == 3 );
 
 
   wxASSERT( conf->Read("Subgroup/SubgroupEntry", 0l) == 3 );
 

-  // use absolute path: it's allowed, too
+  // use absolute path: it is allowed, too

   wxASSERT( conf->Read("/RootEntry", 0l) == 1 );
 \end{verbatim}
 
   wxASSERT( conf->Read("/RootEntry", 0l) == 1 );
 \end{verbatim}
 

-{\it Warning}: it's probably a good idea to always restore the path to its
+{\it Warning}: it is probably a good idea to always restore the path to its

 old value on function exit:
 
 \begin{verbatim}
 old value on function exit:
 
 \begin{verbatim}


@@ -167,7 +175,7 @@ doesn't save and restore the path):
 \end{verbatim}
 
 Finally, the path separator in wxConfigBase and derived classes is always '/',
 \end{verbatim}
 
 Finally, the path separator in wxConfigBase and derived classes is always '/',

-regardless of the platform (i.e. it's {\bf not} '$\backslash\backslash$' under Windows).
+regardless of the platform (i.e. it is {\bf not} '$\backslash\backslash$' under Windows).

 
 \helpref{SetPath}{wxconfigbasesetpath}\\
 \helpref{GetPath}{wxconfigbasegetpath}
 
 \helpref{SetPath}{wxconfigbasesetpath}\\
 \helpref{GetPath}{wxconfigbasegetpath}


@@ -178,9 +186,9 @@ The functions in this section allow to enumerate all entries and groups in the
 config file. All functions here return FALSE when there are no more items.
 
 You must pass the same index to GetNext and GetFirst (don't modify it).
 config file. All functions here return FALSE when there are no more items.
 
 You must pass the same index to GetNext and GetFirst (don't modify it).

-Please note that it's {\bf not} the index of the current item (you will have
+Please note that it is {\bf not} the index of the current item (you will have

 some great surprizes with wxRegConfig if you assume this) and you shouldn't
 some great surprizes with wxRegConfig if you assume this) and you shouldn't

-even look at it: it's just a "cookie" which stores the state of the
+even look at it: it is just a "cookie" which stores the state of the

 enumeration. It can't be stored inside the class because it would prevent you
 from running several enumerations simultaneously, that's why you must pass it
 explicitly.
 enumeration. It can't be stored inside the class because it would prevent you
 from running several enumerations simultaneously, that's why you must pass it
 explicitly.


@@ -233,12 +241,11 @@ actually enumerating them, but you will probably never need them.
 \helpref{Exists}{wxconfigbaseexists}\\
 \helpref{GetEntryType}{wxconfigbasegetentrytype}
 
 \helpref{Exists}{wxconfigbaseexists}\\
 \helpref{GetEntryType}{wxconfigbasegetentrytype}
 

-\membersection{Miscellaneous accessors}
+\membersection{Miscellaneous functions}

 
 

-\helpref{SetAppName}{wxconfigbasesetappname}\\

 \helpref{GetAppName}{wxconfigbasegetappname}\\
 \helpref{GetAppName}{wxconfigbasegetappname}\\

-\helpref{SetVendorName}{wxconfigbasesetvendorname}\\
-\helpref{GetVendorName}{wxconfigbasegetvendorname}
+\helpref{GetVendorName}{wxconfigbasegetvendorname}\\
+\helpref{SetUmask}{wxfileconfigsetumask}

 
 \membersection{Key access}
 
 
 \membersection{Key access}
 


@@ -250,7 +257,7 @@ Currently, only two types of data are supported: string and long (but it might
 change in the near future). To work with other types: for {\it int} or {\it
 bool} you can work with function taking/returning {\it long} and just use the
 casts. Better yet, just use {\it long} for all variables which you're going to
 change in the near future). To work with other types: for {\it int} or {\it
 bool} you can work with function taking/returning {\it long} and just use the
 casts. Better yet, just use {\it long} for all variables which you're going to

-save in the config file: chances are that \verb$sizeof(bool) == sizeof(int) == sizeof(long)$ anyhow on your system. For {\it float}, {\it double} and, in
+save in the config file: chances are that \tt{sizeof(bool) == sizeof(int) == sizeof(long)} anyhow on your system. For {\it float}, {\it double} and, in

 general, any other type you'd have to translate them to/from string
 representation and use string functions.
 
 general, any other type you'd have to translate them to/from string
 representation and use string functions.
 


@@ -302,8 +309,8 @@ config file:
   UserData = %windir%\\data.dat
 \end{verbatim}
 
   UserData = %windir%\\data.dat
 \end{verbatim}
 

-the call to \verb$config->Read("UserData")$ will return something like
-\verb$"/home/zeitlin/data"$ if you're lucky enough to run a Linux system ;-)
+the call to \tt{config->Read("UserData")} will return something like
+\tt{"/home/zeitlin/data"} if you're lucky enough to run a Linux system ;-)

 
 Although this feature is very useful, it may be annoying if you read a value
 which containts '\$' or '\%' symbols (\% is used for environment variables
 
 Although this feature is very useful, it may be annoying if you read a value
 which containts '\$' or '\%' symbols (\% is used for environment variables


@@ -315,7 +322,7 @@ would be to prefix the offending symbols with a backslash.
 The following functions control this option:
 
 \helpref{IsExpandingEnvVars}{wxconfigbaseisexpandingenvvars}\\
 The following functions control this option:
 
 \helpref{IsExpandingEnvVars}{wxconfigbaseisexpandingenvvars}\\

-\helpref{SetExpandingEnvVars}{wxconfigbasesetexpandingenvvars}\\
+\helpref{SetExpandEnvVars}{wxconfigbasesetexpandenvvars}\\

 \helpref{SetRecordDefaults}{wxconfigbasesetrecorddefaults}\\
 \helpref{IsRecordingDefaults}{wxconfigbaseisrecordingdefaults}
 
 \helpref{SetRecordDefaults}{wxconfigbasesetrecorddefaults}\\
 \helpref{IsRecordingDefaults}{wxconfigbaseisrecordingdefaults}
 


@@ -360,7 +367,9 @@ class and is ignored by some. For wxFileConfig, these styles determine whether
 a local or global config file is created or used. If the flag is present but
 the parameter is empty, the parameter will be set to a default. If the
 parameter is present but the style flag not, the relevant flag will be added
 a local or global config file is created or used. If the flag is present but
 the parameter is empty, the parameter will be set to a default. If the
 parameter is present but the style flag not, the relevant flag will be added

-to the style.}
+to the style. For wxFileConfig you can also add wxCONFIG\_USE\_RELATIVE\_PATH 
+by logicaly or'ing it to either of the \_FILE options to tell wxFileConfig to 
+use relative instead of absolute paths.  }

 
 \wxheading{Remarks}
 
 
 \wxheading{Remarks}
 


@@ -399,8 +408,7 @@ for use by desinstallation routine.
 
 \membersection{wxConfigBase::DeleteEntry}\label{wxconfigbasedeleteentry}
 
 
 \membersection{wxConfigBase::DeleteEntry}\label{wxconfigbasedeleteentry}
 

-\func{bool}{DeleteEntry}{\param{const wxString\& }{ key}, \param{bool}{
-bDeleteGroupIfEmpty = TRUE}}
+\func{bool}{DeleteEntry}{\param{const wxString\& }{ key}, \param{bool}{ bDeleteGroupIfEmpty = TRUE}}

 
 Deletes the specified entry and the group it belongs to if it was the last key
 in it and the second parameter is true.
 
 Deletes the specified entry and the group it belongs to if it was the last key
 in it and the second parameter is true.


@@ -426,9 +434,10 @@ destructor)
 
 \membersection{wxConfigBase::Get}\label{wxconfigbaseget}
 
 
 \membersection{wxConfigBase::Get}\label{wxconfigbaseget}
 

-\func{wxConfigBase *}{Get}{\void}
+\func{wxConfigBase *}{Get}{\param{bool }{CreateOnDemand = TRUE}}

 
 

-Get the current config object. If there is no current object, creates one
+Get the current config object. If there is no current object and
+{\it CreateOnDemand} is TRUE, creates one

 (using {\it Create}) unless DontCreateOnDemand was called previously.
 
 \membersection{wxConfigBase::GetAppName}\label{wxconfigbasegetappname}
 (using {\it Create}) unless DontCreateOnDemand was called previously.
 
 \membersection{wxConfigBase::GetAppName}\label{wxconfigbasegetappname}


@@ -445,7 +454,7 @@ Returns the type of the given entry or {\it Unknown} if the entry doesn't
 exist. This function should be used to decide which version of Read() should
 be used because some of wxConfig implementations will complain about type
 mismatch otherwise: e.g., an attempt to read a string value from an integer
 exist. This function should be used to decide which version of Read() should
 be used because some of wxConfig implementations will complain about type
 mismatch otherwise: e.g., an attempt to read a string value from an integer

-key with \helpref{wxRegConfig}{wxregconfig} will fail.
+key with wxRegConfig will fail.

 
 The result is an element of enum EntryType:
 
 
 The result is an element of enum EntryType:
 


@@ -462,8 +471,7 @@ The result is an element of enum EntryType:
 
 \membersection{wxConfigBase::GetFirstGroup}\label{wxconfigbasegetfirstgroup}
 
 
 \membersection{wxConfigBase::GetFirstGroup}\label{wxconfigbasegetfirstgroup}
 

-\constfunc{bool}{GetFirstGroup}{\param{wxString\& }{str}, \param{long\&}{
-index}}
+\constfunc{bool}{GetFirstGroup}{\param{wxString\& }{str}, \param{long\&}{ index}}

 
 Gets the first group.
 
 
 Gets the first group.
 


@@ -473,8 +481,7 @@ the next call.}
 
 \membersection{wxConfigBase::GetFirstEntry}\label{wxconfigbasegetfirstentry}
 
 
 \membersection{wxConfigBase::GetFirstEntry}\label{wxconfigbasegetfirstentry}
 

-\constfunc{bool}{GetFirstEntry}{\param{wxString\& }{str}, \param{long\&}{
-index}}
+\constfunc{bool}{GetFirstEntry}{\param{wxString\& }{str}, \param{long\&}{ index}}

 
 Gets the first entry.
 
 
 Gets the first entry.
 


@@ -484,8 +491,7 @@ the next call.}
 
 \membersection{wxConfigBase::GetNextGroup}\label{wxconfigbasegetnextgroup}
 
 
 \membersection{wxConfigBase::GetNextGroup}\label{wxconfigbasegetnextgroup}
 

-\constfunc{bool}{GetNextGroup}{\param{wxString\& }{str}, \param{long\&}{
-index}}
+\constfunc{bool}{GetNextGroup}{\param{wxString\& }{str}, \param{long\&}{ index}}

 
 Gets the next group.
 
 
 Gets the next group.
 


@@ -495,8 +501,7 @@ the next call.}
 
 \membersection{wxConfigBase::GetNextEntry}\label{wxconfigbasegetnextentry}
 
 
 \membersection{wxConfigBase::GetNextEntry}\label{wxconfigbasegetnextentry}
 

-\constfunc{bool}{GetNextEntry}{\param{wxString\& }{str}, \param{long\&}{
-index}}
+\constfunc{bool}{GetNextEntry}{\param{wxString\& }{str}, \param{long\&}{ index}}

 
 Gets the next entry.
 
 
 Gets the next entry.
 


@@ -547,20 +552,18 @@ Returns TRUE if we are expanding environment variables in key values.
 
 \membersection{wxConfigBase::IsRecordingDefaults}\label{wxconfigbaseisrecordingdefaults}
 
 
 \membersection{wxConfigBase::IsRecordingDefaults}\label{wxconfigbaseisrecordingdefaults}
 

-\func{bool}{IsRecordingDefaults}{\void} const
+\constfunc{bool}{IsRecordingDefaults}{\void}

 
 Returns TRUE if we are writing defaults back to the config file.
 
 \membersection{wxConfigBase::Read}\label{wxconfigbaseread}
 
 
 Returns TRUE if we are writing defaults back to the config file.
 
 \membersection{wxConfigBase::Read}\label{wxconfigbaseread}
 

-\constfunc{bool}{Read}{\param{const wxString\& }{key}, \param{wxString*}{
-str}}
+\constfunc{bool}{Read}{\param{const wxString\& }{key}, \param{wxString*}{ str}}

 
 Read a string from the key, returning TRUE if the value was read. If the key
 was not found, {\it str} is not changed.
 
 
 Read a string from the key, returning TRUE if the value was read. If the key
 was not found, {\it str} is not changed.
 

-\constfunc{bool}{Read}{\param{const wxString\& }{key}, \param{wxString*}{
-str}, \param{const wxString\& }{defaultVal}}
+\constfunc{bool}{Read}{\param{const wxString\& }{key}, \param{wxString*}{ str}, \param{const wxString\& }{defaultVal}}

 
 Read a string from the key. The default value is returned if the key was not
 found.
 
 Read a string from the key. The default value is returned if the key was not
 found.


@@ -583,20 +586,27 @@ not found, {\it l} is not changed.
 Reads a long value, returning TRUE if the value was found. If the value was
 not found, {\it defaultVal} is used instead.
 
 Reads a long value, returning TRUE if the value was found. If the value was
 not found, {\it defaultVal} is used instead.
 

-\constfunc{long }{Read}{\param{const wxString\& }{key}, \param{long}{
-defaultVal}}
+\constfunc{long }{Read}{\param{const wxString\& }{key}, \param{long}{ defaultVal}}

 
 Reads a long value from the key and returns it. {\it defaultVal} is returned
 if the key is not found.
 
 NB: writing
 
 
 Reads a long value from the key and returns it. {\it defaultVal} is returned
 if the key is not found.
 
 NB: writing
 

-{\small \begin{verbatim} conf->Read("key", 0); \end{verbatim} }
+{\small
+\begin{verbatim}
+    conf->Read("key", 0);
+\end{verbatim}
+}

 
 won't work because the call is ambiguous: compiler can not choose between two
 {\it Read} functions. Instead, write:
 
 
 won't work because the call is ambiguous: compiler can not choose between two
 {\it Read} functions. Instead, write:
 

-{\small \begin{verbatim} conf->Read("key", 0l); \end{verbatim} }
+{\small
+\begin{verbatim}
+    conf->Read("key", 0l);
+\end{verbatim}
+}

 
 \constfunc{bool}{Read}{\param{const wxString\& }{ key}, \param{double*}{ d}}
 
 
 \constfunc{bool}{Read}{\param{const wxString\& }{ key}, \param{double*}{ d}}
 


@@ -623,9 +633,9 @@ not found, {\it defaultVal} is used instead.
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}

-\twocolitem{\bf{Read(key, default="")}}{Returns a string.}
-\twocolitem{\bf{ReadInt(key, default=0)}}{Returns an int.}
-\twocolitem{\bf{ReadFloat(key, default=0.0)}}{Returns a floating point number.}
+\twocolitem{{\bf Read(key, default="")}}{Returns a string.}
+\twocolitem{{\bf ReadInt(key, default=0)}}{Returns an int.}
+\twocolitem{{\bf ReadFloat(key, default=0.0)}}{Returns a floating point number.}

 \end{twocollist}}
 }
 
 \end{twocollist}}
 }
 


@@ -658,13 +668,7 @@ exists.
 Sets the config object as the current one, returns the pointer to the previous
 current object (both the parameter and returned value may be NULL)
 
 Sets the config object as the current one, returns the pointer to the previous
 current object (both the parameter and returned value may be NULL)
 

-\membersection{wxConfigBase::SetAppName}\label{wxconfigbasesetappname}
-
-\func{void }{SetAppName}{\param{const wxString\&}{ appName}}
-
-Sets the application name.
-
-\membersection{wxConfigBase::SetExpandingEnvVars}\label{wxconfigbasesetexpandingenvvars}
+\membersection{wxConfigBase::SetExpandEnvVars}\label{wxconfigbasesetexpandenvvars}

 
 \func{void}{SetExpandEnvVars }{\param{bool }{bDoIt = TRUE}}
 
 
 \func{void}{SetExpandEnvVars }{\param{bool }{bDoIt = TRUE}}
 


@@ -674,8 +678,8 @@ Determine whether we wish to expand environment variables in key values.
 
 \func{void}{SetPath}{\param{const wxString\& }{strPath}}
 
 
 \func{void}{SetPath}{\param{const wxString\& }{strPath}}
 

-Set current path: if the first character is '/', it's the absolute path,
-otherwise it's a relative path. '..' is supported. If the strPath doesn't
+Set current path: if the first character is '/', it is the absolute path,
+otherwise it is a relative path. '..' is supported. If the strPath doesn't

 exist it is created.
 
 \membersection{wxConfigBase::SetRecordDefaults}\label{wxconfigbasesetrecorddefaults}
 exist it is created.
 
 \membersection{wxConfigBase::SetRecordDefaults}\label{wxconfigbasesetrecorddefaults}


@@ -688,11 +692,18 @@ If on (default is off) all default values are written back to the config file.
 This allows the user to see what config options may be changed and is probably
 useful only for wxFileConfig.
 
 This allows the user to see what config options may be changed and is probably
 useful only for wxFileConfig.
 

-\membersection{wxConfigBase::SetVendorName}\label{wxconfigbasesetvendorname}
+\membersection{wxConfigBase::SetUmask}\label{wxfileconfigsetumask}
+
+\func{void}{SetUmask}{\param{int }{mode}}

 
 

-\func{void}{SetVendorName}{\param{const wxString\&}{ vendorName}}
+{\bf NB:} this function is not in the base wxConfigBase class but is only
+implemented in wxFileConfig. Moreover, this function is Unix-specific and
+doesn't do anything on other platforms.

 
 

-Sets the vendor name.
+SetUmask() allows to set the mode to be used for the config file creation.
+For example, to create a config file which is not readable by other users
+(useful if it stores some sensitive information, such as passwords), you
+should do {\tt SetUmask(0077)}.

 
 \membersection{wxConfigBase::Write}\label{wxconfigbasewrite}
 
 
 \membersection{wxConfigBase::Write}\label{wxconfigbasewrite}
 


@@ -711,13 +722,9 @@ on success.
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}

-\twocolitem{\bf{Write(key, value)}}{Writes a string.}
-\twocolitem{\bf{WriteInt(key, value)}}{Writes an int.}
-\twocolitem{\bf{WriteFloat(key, value)}}{Writes a floating point number.}
+\twocolitem{{\bf Write(key, value)}}{Writes a string.}
+\twocolitem{{\bf WriteInt(key, value)}}{Writes an int.}
+\twocolitem{{\bf WriteFloat(key, value)}}{Writes a floating point number.}

 \end{twocollist}}
 }
 
 \end{twocollist}}
 }
 

-
-
-
-