// Purpose: interface of wxMessageDialog
// Author: wxWidgets team
// RCS-ID: $Id$
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
/**
This class represents a dialog that shows a single or multi-line message,
with a choice of OK, Yes, No and Cancel buttons.
+ @beginStyleTable
+ @style{wxOK}
+ Puts an Ok button in the message box. May be combined with @c wxCANCEL.
+ @style{wxCANCEL}
+ Puts a Cancel button in the message box. Must be combined with
+ either @c wxOK or @c wxYES_NO.
+ @style{wxYES_NO}
+ Puts Yes and No buttons in the message box. It is recommended to always
+ use @c wxCANCEL with this style as otherwise the message box won't have
+ a close button under wxMSW and the user will be forced to answer it.
+ @style{wxHELP}
+ Puts a Help button to the message box. This button can have special
+ appearance or be specially positioned if its label is not changed from
+ the default one. Notice that using this button is not supported when
+ showing a message box from non-main thread in wxOSX/Cocoa and it is not
+ supported in wxOSX/Carbon at all. @since 2.9.3.
+ @style{wxNO_DEFAULT}
+ Makes the "No" button default, can only be used with @c wxYES_NO.
+ @style{wxCANCEL_DEFAULT}
+ Makes the "Cancel" button default, can only be used with @c wxCANCEL
+ @style{wxYES_DEFAULT}
+ Makes the "Yes" button default, this is the default behaviour and
+ this flag exists solely for symmetry with @c wxNO_DEFAULT.
+ @style{wxOK_DEFAULT}
+ Makes the "OK" button default, this is the default behaviour and
+ this flag exists solely for symmetry with @c wxCANCEL_DEFAULT.
+ @style{wxICON_NONE}
+ Displays no icon in the dialog if possible (an icon might still be
+ displayed if the current platform mandates its use). This style may be
+ used to prevent the dialog from using the default icon based on @c
+ wxYES_NO presence as explained in @c wxICON_QUESTION and @c
+ wxICON_INFORMATION documentation below.
+ @style{wxICON_EXCLAMATION}
+ Displays an exclamation, or warning, icon in the dialog.
+ @style{wxICON_ERROR}
+ Displays an error icon in the dialog.
+ @style{wxICON_HAND}
+ Displays an error symbol, this is a MSW-inspired synonym for @c wxICON_ERROR.
+ @style{wxICON_QUESTION}
+ Displays a question mark symbol. This icon is automatically used
+ with @c wxYES_NO so it's usually unnecessary to specify it explicitly.
+ This style is not supported for message dialogs under wxMSW when a task
+ dialog is used to implement them (i.e. when running under Windows Vista
+ or later) because <a href="http://msdn.microsoft.com/en-us/library/aa511273.aspx">Microsoft
+ guidelines</a> indicate that no icon should be used for routine
+ confirmations. If it is specified, no icon will be displayed.
+ @style{wxICON_INFORMATION}
+ Displays an information symbol. This icon is used by default if
+ @c wxYES_NO is not given so it is usually unnecessary to specify it
+ explicitly.
+ @style{wxSTAY_ON_TOP}
+ Makes the message box stay on top of all other windows and not only
+ just its parent (currently implemented only under MSW and GTK).
+ @style{wxCENTRE}
+ Centre the message box on its parent or on the screen if parent is not
+ specified.
+ Setting this style under MSW makes no differences as the dialog is
+ always centered on the parent.
+ @endStyleTable
+
@library{wxcore}
@category{cmndlg}
- @see @ref overview_wxmessagedialogoverview "wxMessageDialog overview"
+ @see @ref overview_cmndlg_msg
+ @see wxRichMessageDialog
*/
class wxMessageDialog : public wxDialog
{
public:
/**
- Constructor specifying the message box properties.
+ Helper class allowing to use either stock id or string labels.
+
+ This class should never be used explicitly and is not really part of
+ wxWidgets API but rather is just an implementation helper allowing the
+ methods such as SetYesNoLabels() and SetOKCancelLabels() below to be
+ callable with either stock ids (e.g. ::wxID_CLOSE) or strings
+ ("&Close").
+ */
+ class ButtonLabel
+ {
+ public:
+ /// Construct the label from a stock id.
+ ButtonLabel(int stockId);
+
+ /// Construct the label from the specified string.
+ ButtonLabel(const wxString& label);
+
+ /**
+ Return the associated label as string.
+
+ Get the string label, whether it was originally specified directly
+ or as a stock id -- this is only useful for platforms without native
+ stock items id support
+ */
+ wxString GetAsString() const;
+
+ /**
+ Return the stock id or wxID_NONE if this is not a stock label.
+ */
+ int GetStockId() const;
+ };
+ /**
+ Constructor specifying the message box properties.
Use ShowModal() to show the dialog.
- @a style may be a bit list of the following identifiers:
-
- @beginStyleTable
- @style{wxOK}
- Puts an Ok button in the message box. May be combined with @c
- wxCANCEL.
- @style{wxCANCEL}
- Puts a Cancel button in the message box. Must be combined with
- either @c wxOK or @c wxYES_NO.
- @style{wxYES_NO}
- Puts Yes and No buttons in the message box. May be combined with
- @c wxCANCEL.
- @style{wxNO_DEFAULT}
- Makes the "No" button default, can only be used with @c wxYES_NO.
- @style{wxYES_DEFAULT}
- Makes the "Yes" button default, this is the default behaviour and
- this flag exists solely for symmetry with @c wxNO_DEFAULT.
- @style{wxICON_EXCLAMATION}
- Displays an exclamation mark symbol.
- @style{wxICON_ERROR}
- Displays an error symbol.
- @style{wxICON_HAND}
- Displays an error symbol, this is a MSW-inspired synonym for @c
- wxICON_ERROR.
- @style{wxICON_QUESTION}
- Displays a question mark symbol. This icon is automatically used
- with @c wxYES_NO so it's usually unnecessary to specify it
- explicitly.
- @style{wxICON_INFORMATION}
- Displays an information symbol. This icon is used by default if @c
- wxYES_NO is not given so it is usually unnecessary to specify it
- explicitly.
- @style{wxSTAY_ON_TOP}
- Makes the message box stay on top of all other windows (currently
- implemented only under MSW).
- @endStyleTable
+ @a style may be a bit list of the identifiers described above.
+
+ Notice that not all styles are compatible: only one of @c wxOK and
+ @c wxYES_NO may be specified (and one of them must be specified) and at
+ most one default button style can be used and it is only valid if the
+ corresponding button is shown in the message box.
@param parent
Parent window.
Dialog position (ignored under MSW).
*/
wxMessageDialog(wxWindow* parent, const wxString& message,
- const wxString& caption = "Message box",
- long style = wxOK | wxCANCEL,
+ const wxString& caption = wxMessageBoxCaptionStr,
+ long style = wxOK | wxCENTRE,
const wxPoint& pos = wxDefaultPosition);
/**
If it is set, the main message appears highlighted -- if supported --
and this message appears beneath it in normal font. On the platforms
which don't support extended messages, it is simply appended to the
- normal message with a new line separating them.
+ normal message with an empty line separating them.
+
+ @since 2.9.0
*/
- void SetExtendedMessage(const wxString extendedMessage);
+ virtual void SetExtendedMessage(const wxString& extendedMessage);
+
+ /**
+ Sets the label for the Help button.
+
+ Please see the remarks in SetYesNoLabels() documentation.
+
+ Notice that changing the label of the help button resets its special
+ status (if any, this depends on the platform) and it will be treated
+ just like another button in this case.
+
+ @since 2.9.3
+ */
+ virtual bool SetHelpLabel(const ButtonLabel& help);
/**
Sets the message shown by the dialog.
+
+ @since 2.9.0
*/
- void SetMessage(const wxString msg);
+ virtual void SetMessage(const wxString& message);
/**
Overrides the default labels of the OK and Cancel buttons.
Please see the remarks in SetYesNoLabels() documentation.
+
+ @since 2.9.0
*/
- bool SetOKCancelLabels(const wxString ok, const wxString cancel);
+ virtual bool SetOKCancelLabels(const ButtonLabel& ok,
+ const ButtonLabel& cancel);
/**
Overrides the default label of the OK button.
Please see the remarks in SetYesNoLabels() documentation.
+
+ @since 2.9.0
*/
- bool SetOKLabel(const wxString ok);
+ virtual bool SetOKLabel(const ButtonLabel& ok);
/**
Overrides the default labels of the Yes, No and Cancel buttons.
Please see the remarks in SetYesNoLabels() documentation.
+
+ @since 2.9.0
*/
- bool SetYesNoCancelLabels(const wxString yes, const wxString no,
- const wxString cancel);
+ virtual bool SetYesNoCancelLabels(const ButtonLabel& yes,
+ const ButtonLabel& no,
+ const ButtonLabel& cancel);
/**
Overrides the default labels of the Yes and No buttons.
- Notice that this function is not currently available on all platforms,
- so it may return @false to indicate that the labels couldn't be
- changed. If it returns @true (currently only under wxMac), the labels
- were set successfully. Typically, if the function was used
- successfully, the main dialog message may need to be changed, e.g.:
+ The arguments of this function can be either strings or one of the
+ standard identifiers, such as @c wxID_APPLY or @c wxID_OPEN. Notice
+ that even if the label is specified as an identifier, the return value
+ of the dialog ShowModal() method still remains one of @c wxID_OK, @c
+ wxID_CANCEL, @c wxID_YES or @c wxID_NO values, i.e. this identifier
+ changes only the label appearance but not the return code generated by
+ the button. It is possible to mix stock identifiers and string labels
+ in the same function call, for example:
+ @code
+ wxMessageDialog dlg(...);
+ dlg.SetYesNoLabels(wxID_SAVE, _("&Don't save"));
+ @endcode
+
+ Also notice that this function is not currently available on all
+ platforms (although as of wxWidgets 2.9.0 it is implemented in all
+ major ports), so it may return @false to indicate that the labels
+ couldn't be changed. If it returns @true, the labels were set
+ successfully.
+
+ Typically, if the function was used successfully, the main dialog
+ message may need to be changed, e.g.:
@code
wxMessageDialog dlg(...);
if ( dlg.SetYesNoLabels(_("&Quit"), _("&Don't quit")) )
else // buttons have standard "Yes"/"No" values, so rephrase the question
dlg.SetMessage(_("Do you really want to quit?"));
@endcode
+
+ @since 2.9.0
*/
- bool SetYesNoLabels(const wxString yes, const wxString no);
+ virtual bool SetYesNoLabels(const ButtonLabel& yes, const ButtonLabel& no);
/**
Shows the dialog, returning one of wxID_OK, wxID_CANCEL, wxID_YES,
- wxID_NO.
+ wxID_NO or wxID_HELP.
Notice that this method returns the identifier of the button which was
clicked unlike wxMessageBox() function.
*/
- int ShowModal();
+ virtual int ShowModal();
+
+
+ wxString GetCaption() const;
+ wxString GetMessage() const;
+ wxString GetExtendedMessage() const;
+ long GetMessageDialogStyle() const;
+ bool HasCustomLabels() const;
+ wxString GetYesLabel() const;
+ wxString GetNoLabel() const;
+ wxString GetOKLabel() const;
+ wxString GetCancelLabel() const;
+ wxString GetHelpLabel() const;
+ long GetEffectiveIcon() const;
+
};
// Global functions/macros
// ============================================================================
-/** @ingroup group_funcmacro_dialog */
+/** @addtogroup group_funcmacro_dialog */
//@{
/**
extended text and custom labels for the message box buttons, are not
provided by this function but only by wxMessageDialog.
- The return value is one of: @c wxYES, @c wxNO, @c wxCANCEL or @c wxOK
- (notice that this return value is @b different from the return value of
- wxMessageDialog::ShowModal()).
+ The return value is one of: @c wxYES, @c wxNO, @c wxCANCEL, @c wxOK or @c
+ wxHELP (notice that this return value is @b different from the return value
+ of wxMessageDialog::ShowModal()).
For example:
@code
@param style
Combination of style flags described in wxMessageDialog documentation.
@param x
- Horizontal dialog position (ignored under MSW). Use @c wxDefaultCoord
+ Horizontal dialog position (ignored under MSW). Use ::wxDefaultCoord
for @a x and @a y to let the system position the window.
@param y
Vertical dialog position (ignored under MSW).
+
@header{wx/msgdlg.h}
*/
int wxMessageBox(const wxString& message,
- const wxString& caption = "Message",
- int style = wxOK,
+ const wxString& caption = wxMessageBoxCaptionStr,
+ int style = wxOK | wxCENTRE,
wxWindow* parent = NULL,
int x = wxDefaultCoord,
int y = wxDefaultCoord);
projects / wxWidgets.git / blobdiff