// Modified by:
// Created: 05/25/99
// RCS-ID: $Id$
-// Copyright: (c) wxWindows team
+// Copyright: (c) wxWidgets team
// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
#include <math.h>
-// bool wxDCBase::sm_cacheing = FALSE;
+// bool wxDCBase::sm_cacheing = false;
// ============================================================================
// implementation
delete [] points;
}
+void
+wxDCBase::DoDrawPolyPolygon(int n,
+ int count[],
+ wxPoint points[],
+ wxCoord xoffset, wxCoord yoffset,
+ int fillStyle)
+{
+ if ( n == 1 )
+ {
+ DoDrawPolygon(count[0], points, xoffset, yoffset, fillStyle);
+ return;
+ }
+
+ int i, j, lastOfs;
+ wxPoint* pts;
+ wxPen pen;
+
+ for (i = j = lastOfs = 0; i < n; i++)
+ {
+ lastOfs = j;
+ j += count[i];
+ }
+ pts = new wxPoint[j+n-1];
+ for (i = 0; i < j; i++)
+ pts[i] = points[i];
+ for (i = 2; i <= n; i++)
+ {
+ lastOfs -= count[n-i];
+ pts[j++] = pts[lastOfs];
+ }
+
+ pen = GetPen();
+ SetPen(wxPen(*wxBLACK, 0, wxTRANSPARENT));
+ DoDrawPolygon(j, pts, xoffset, yoffset, fillStyle);
+ SetPen(pen);
+ for (i = j = 0; i < n; i++)
+ {
+ DoDrawLines(count[i], pts+j, xoffset, yoffset);
+ j += count[i];
+ }
+ delete[] pts;
+}
+
// ----------------------------------------------------------------------------
// splines
// ----------------------------------------------------------------------------
point->x = (int) x;
point->y = (int) y;
wx_spline_point_list.Append((wxObject*)point);
- return TRUE;
+ return true;
}
static void wx_spline_draw_point_array(wxDCBase *dc)
#endif // wxUSE_SPLINES
+// ----------------------------------------------------------------------------
+// Partial Text Extents
+// ----------------------------------------------------------------------------
+
+
+// Each element of the widths array will be the width of the string up to and
+// including the coresponding character in text. This is the generic
+// implementation, the port-specific classes should do this with native APIs
+// if available and if faster. Note: pango_layout_index_to_pos is much slower
+// than calling GetTextExtent!!
+
+#define FWC_SIZE 256
+
+class FontWidthCache
+{
+public:
+ FontWidthCache() : m_scaleX(1), m_widths(NULL) { }
+ ~FontWidthCache() { delete []m_widths; }
+
+ void Reset()
+ {
+ if (!m_widths)
+ m_widths = new int[FWC_SIZE];
+
+ memset(m_widths, 0, sizeof(int)*FWC_SIZE);
+ }
+
+ wxFont m_font;
+ double m_scaleX;
+ int *m_widths;
+};
+
+static FontWidthCache s_fontWidthCache;
+
+bool wxDCBase::DoGetPartialTextExtents(const wxString& text, wxArrayInt& widths) const
+{
+ int totalWidth = 0;
+
+ size_t i, len = text.Length();
+ widths.Empty();
+ widths.Add(0, len);
+ int w, h;
+
+ // reset the cache if font or horizontal scale have changed
+ if (!s_fontWidthCache.m_widths ||
+ (s_fontWidthCache.m_scaleX != m_scaleX) ||
+ (s_fontWidthCache.m_font != GetFont()))
+ {
+ s_fontWidthCache.Reset();
+ s_fontWidthCache.m_font = GetFont();
+ s_fontWidthCache.m_scaleX = m_scaleX;
+ }
+
+ // Calculate the position of each character based on the widths of
+ // the previous characters
+ for (i=0; i<len; i++)
+ {
+ const wxChar c = text[i];
+ unsigned int c_int = (unsigned int)c;
+
+ if ((c_int < FWC_SIZE) && (s_fontWidthCache.m_widths[c_int] != 0))
+ {
+ w = s_fontWidthCache.m_widths[c_int];
+ }
+ else
+ {
+ GetTextExtent(c, &w, &h);
+ if (c_int < FWC_SIZE)
+ s_fontWidthCache.m_widths[c_int] = w;
+ }
+
+ totalWidth += w;
+ widths[i] = totalWidth;
+ }
+
+ return true;
+}
+
+
// ----------------------------------------------------------------------------
// enhanced text drawing
// ----------------------------------------------------------------------------
width0 = width;
if ( bitmap.Ok() )
{
- DrawBitmap(bitmap, x, y, TRUE /* use mask */);
+ DrawBitmap(bitmap, x, y, true /* use mask */);
wxCoord offset = bitmap.GetWidth() + 4;
x += offset;
}
/*
-Notes for wxWindows DrawEllipticArcRot(...)
+Notes for wxWidgets DrawEllipticArcRot(...)
wxDCBase::DrawEllipticArcRot(...) draws a rotated elliptic arc or an ellipse.
It uses wxDCBase::CalculateEllipticPoints(...) and wxDCBase::Rotate(...),
methods like (WinCE) wxDC::DoDrawArc(...).
CalculateEllipticPoints(...) fills a given list of wxPoints with some points
-of an elliptic arc. The algorithm is pixel-based: In every row (in flat
+of an elliptic arc. The algorithm is pixel-based: In every row (in flat
parts) or every column (in steep parts) only one pixel is calculated.
Trigonometric calculation (sin, cos, tan, atan) is only done if the
-starting angle is not equal to the ending angle. The calculation of the
+starting angle is not equal to the ending angle. The calculation of the
pixels is done using simple arithmetic only and should perform not too
bad even on devices without floating point processor. I didn't test this yet.
Rotate(...) rotates a list of point pixel-based, you will see rounding errors.
-For instance: an ellipse rotated 180 degrees is drawn
+For instance: an ellipse rotated 180 degrees is drawn
slightly different from the original.
-The points are then moved to an array and used to draw a polyline and/or polygon
-(with center added, the pie).
+The points are then moved to an array and used to draw a polyline and/or polygon
+(with center added, the pie).
The result looks quite similar to the native ellipse, only e few pixels differ.
The performance on a desktop system (Athlon 1800, WinXP) is about 7 times
An rotated ellipse outside the clipping region takes nearly the same time,
while an native ellipse outside takes nearly no time to draw.
-If you draw an arc with this new method, you will see the starting and ending angles
+If you draw an arc with this new method, you will see the starting and ending angles
are calculated properly.
If you use DrawEllipticArc(...), you will see they are only correct for circles
and not properly calculated for ellipses.
*/
#ifdef __WXWINCE__
-void wxDCBase::DoDrawEllipticArcRot( wxCoord x, wxCoord y,
- wxCoord w, wxCoord h,
+void wxDCBase::DoDrawEllipticArcRot( wxCoord x, wxCoord y,
+ wxCoord w, wxCoord h,
double sa, double ea, double angle )
{
wxList list;
int n = list.Number();
wxPoint *points = new wxPoint[n];
int i = 0;
- wxNode* node = 0;
+ wxNode* node = 0;
for ( node = list.First(); node; node = node->Next(), i++ )
{
wxPoint *point = (wxPoint *)node->Data();
}
// first draw the pie without pen, if necessary
- if( GetBrush() != *wxTRANSPARENT_BRUSH )
+ if( GetBrush() != *wxTRANSPARENT_BRUSH )
{
wxPen tempPen( GetPen() );
SetPen( *wxTRANSPARENT_PEN );
}
// then draw the arc without brush, if necessary
- if( GetPen() != *wxTRANSPARENT_PEN )
+ if( GetPen() != *wxTRANSPARENT_PEN )
{
// without center
DoDrawLines( n-1, points, 0, 0 );
for ( wxNode* node = points->First(); node; node = node->Next() )
{
wxPoint* point = (wxPoint*)node->Data();
-
+
// transform coordinates, if necessary
if( center.x ) point->x -= center.x;
if( center.y ) point->y -= center.y;
}
}
-void wxDCBase::CalculateEllipticPoints( wxList* points,
- wxCoord xStart, wxCoord yStart,
- wxCoord w, wxCoord h,
+void wxDCBase::CalculateEllipticPoints( wxList* points,
+ wxCoord xStart, wxCoord yStart,
+ wxCoord w, wxCoord h,
double sa, double ea )
{
double pi = 3.1415926535;
wxCoord b = h/2;
// decrement 1 pixel if ellipse is smaller than 2*a, 2*b
int decrX = 0;
- if( 2*a == w ) decrX = 1;
+ if( 2*a == w ) decrX = 1;
int decrY = 0;
- if( 2*b == h ) decrY = 1;
+ if( 2*b == h ) decrY = 1;
// center
wxCoord xCenter = xStart + a;
wxCoord yCenter = yStart + b;
ear = ea * pi / 180.0;
// correct angle circle -> ellipse
sar = atan( -a/(double)b * tan( sar ) );
- if ( sq == 1 || sq == 2 ) sar += pi;
+ if ( sq == 1 || sq == 2 ) sar += pi;
ear = atan( -a/(double)b * tan( ear ) );
if ( eq == 1 || eq == 2 ) ear += pi;
// coordinates of points
y2 = y2-y-y+1;
--y;
}
- // old y now to big: set point with old y, old x
+ // old y now to big: set point with old y, old x
if( bNewPoint && x>1)
{
int x1 = x - 1;
pointsarray[3].Append( (wxObject*) new wxPoint( xCenter + x1 - decrX, yCenter + y_old - decrY ) );
} // set point
} // calculate point
-
+
// Starting and/or ending points for the quadrants, first quadrant gets both.
pointsarray[0].Insert( (wxObject*) new wxPoint( xCenter + a - decrX, yCenter ) );
pointsarray[0].Append( (wxObject*) new wxPoint( xCenter, yCenter - b ) );
{
// once: go to starting point in start quadrant
if( !bStarted &&
- (
- ( (wxPoint*) node->Data() )->x < xsa+1 && q <= 1
- ||
+ (
+ ( (wxPoint*) node->Data() )->x < xsa+1 && q <= 1
+ ||
( (wxPoint*) node->Data() )->x > xsa-1 && q >= 2
)
- )
+ )
{
bStarted = true;
}
{
if( q != eq || bForceTurn
||
- ( (wxPoint*) node->Data() )->x > xea+1 && q <= 1
- ||
+ ( (wxPoint*) node->Data() )->x > xea+1 && q <= 1
+ ||
( (wxPoint*) node->Data() )->x < xea-1 && q >= 2
)
{
}
else if( q == eq && !bForceTurn || ( (wxPoint*) node->Data() )->x == xea)
{
- bReady = true;
+ bReady = true;
}
}
} // for node
wxPoint *p = (wxPoint *)node->Data();
delete p;
}
- }
-
+ }
}
else
{
projects / wxWidgets.git / blobdiff