# From configure.in Id: configure.in
+# aclocal.m4 generated automatically by aclocal 1.6 -*- Autoconf -*-
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
-
+# Configure paths for GTK+
+# Owen Taylor 1997-2001
ac_help="$ac_help
--enable-compat20 enable wxWindows 2.0 compatibility"
ac_help="$ac_help
- --enable-compat22 enable wxWindows 2.2 compatibility"
+ --disable-compat22 disable wxWindows 2.2 compatibility"
ac_help="$ac_help
--enable-intl use internationalization system"
ac_help="$ac_help
ac_help="$ac_help
--enable-icocur use Windows ICO and CUR formats"
ac_help="$ac_help
- --with-gtk-prefix=PFX Prefix where GTK is installed (optional)"
-ac_help="$ac_help
- --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
-ac_help="$ac_help
- --disable-gtktest Do not try to compile and run a test GTK program"
+ --disable-gtktest do not try to compile and run a test GTK+ program"
ac_help="$ac_help
--with-gtk-prefix=PFX Prefix where GTK is installed (optional)"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:997: checking host system type" >&5
+echo "configure:1004: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1018: checking target system type" >&5
+echo "configure:1025: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1036: checking build system type" >&5
+echo "configure:1043: checking build system type" >&5
build_alias=$build
case "$build_alias" in
PROGRAM_EXT=".exe"
DEFAULT_DEFAULT_wxUSE_PM=1
+ LIBS="$LIBS -lstdcpp"
;;
powerpc-*-darwin* )
if test "$USE_LINUX" = 1; then
echo $ac_n "checking for glibc 2.1 or later""... $ac_c" 1>&6
-echo "configure:1401: checking for glibc 2.1 or later" >&5
+echo "configure:1409: checking for glibc 2.1 or later" >&5
if eval "test \"`echo '$''{'wx_lib_glibc21'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1407 "configure"
+#line 1415 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:1418: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1426: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_lib_glibc21=yes
DEFAULT_wxUSE_DIALUP_MANAGER=yes
DEFAULT_wxUSE_JOYSTICK=yes
DEFAULT_wxUSE_DYNLIB_CLASS=yes
- DEFAULT_wxUSE_DYNAMIC_LOADER=no
+ DEFAULT_wxUSE_DYNAMIC_LOADER=yes
DEFAULT_wxUSE_LONGLONG=yes
DEFAULT_wxUSE_GEOMETRY=yes
echo $ac_n "checking for --enable-gui""... $ac_c" 1>&6
-echo "configure:1819: checking for --enable-gui" >&5
+echo "configure:1827: checking for --enable-gui" >&5
no_cache=0
# Check whether --enable-gui or --disable-gui was given.
if test "${enable_gui+set}" = set; then
echo $ac_n "checking for --enable-universal""... $ac_c" 1>&6
-echo "configure:1861: checking for --enable-universal" >&5
+echo "configure:1869: checking for --enable-universal" >&5
no_cache=0
# Check whether --enable-universal or --disable-universal was given.
if test "${enable_universal+set}" = set; then
echo $ac_n "checking for --enable-nanox""... $ac_c" 1>&6
-echo "configure:1954: checking for --enable-nanox" >&5
+echo "configure:1962: checking for --enable-nanox" >&5
no_cache=0
# Check whether --enable-nanox or --disable-nanox was given.
if test "${enable_nanox+set}" = set; then
# Check whether --enable-gtk2 or --disable-gtk2 was given.
if test "${enable_gtk2+set}" = set; then
enableval="$enable_gtk2"
- wxUSE_GTK2=1
+ wxUSE_GTK2="yes"
else
- wxUSE_GTK2=0
+ wxUSE_GTK2="no"
fi
echo $ac_n "checking for --with-libpng""... $ac_c" 1>&6
-echo "configure:2003: checking for --with-libpng" >&5
+echo "configure:2011: checking for --with-libpng" >&5
no_cache=0
# Check whether --with-libpng or --without-libpng was given.
if test "${with_libpng+set}" = set; then
echo $ac_n "checking for --with-libjpeg""... $ac_c" 1>&6
-echo "configure:2054: checking for --with-libjpeg" >&5
+echo "configure:2062: checking for --with-libjpeg" >&5
no_cache=0
# Check whether --with-libjpeg or --without-libjpeg was given.
if test "${with_libjpeg+set}" = set; then
echo $ac_n "checking for --with-libtiff""... $ac_c" 1>&6
-echo "configure:2105: checking for --with-libtiff" >&5
+echo "configure:2113: checking for --with-libtiff" >&5
no_cache=0
# Check whether --with-libtiff or --without-libtiff was given.
if test "${with_libtiff+set}" = set; then
echo $ac_n "checking for --with-opengl""... $ac_c" 1>&6
-echo "configure:2156: checking for --with-opengl" >&5
+echo "configure:2164: checking for --with-opengl" >&5
no_cache=0
# Check whether --with-opengl or --without-opengl was given.
if test "${with_opengl+set}" = set; then
echo $ac_n "checking for --with-dmalloc""... $ac_c" 1>&6
-echo "configure:2198: checking for --with-dmalloc" >&5
+echo "configure:2206: checking for --with-dmalloc" >&5
no_cache=0
# Check whether --with-dmalloc or --without-dmalloc was given.
if test "${with_dmalloc+set}" = set; then
echo $ac_n "checking for --with-regex""... $ac_c" 1>&6
-echo "configure:2237: checking for --with-regex" >&5
+echo "configure:2245: checking for --with-regex" >&5
no_cache=0
# Check whether --with-regex or --without-regex was given.
if test "${with_regex+set}" = set; then
echo $ac_n "checking for --with-zlib""... $ac_c" 1>&6
-echo "configure:2288: checking for --with-zlib" >&5
+echo "configure:2296: checking for --with-zlib" >&5
no_cache=0
# Check whether --with-zlib or --without-zlib was given.
if test "${with_zlib+set}" = set; then
echo $ac_n "checking for --with-odbc""... $ac_c" 1>&6
-echo "configure:2339: checking for --with-odbc" >&5
+echo "configure:2347: checking for --with-odbc" >&5
no_cache=0
# Check whether --with-odbc or --without-odbc was given.
if test "${with_odbc+set}" = set; then
echo $ac_n "checking for --enable-shared""... $ac_c" 1>&6
-echo "configure:2380: checking for --enable-shared" >&5
+echo "configure:2388: checking for --enable-shared" >&5
no_cache=0
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
echo $ac_n "checking for --enable-soname""... $ac_c" 1>&6
-echo "configure:2419: checking for --enable-soname" >&5
+echo "configure:2427: checking for --enable-soname" >&5
no_cache=0
# Check whether --enable-soname or --disable-soname was given.
if test "${enable_soname+set}" = set; then
echo $ac_n "checking for --enable-optimise""... $ac_c" 1>&6
-echo "configure:2458: checking for --enable-optimise" >&5
+echo "configure:2466: checking for --enable-optimise" >&5
no_cache=0
# Check whether --enable-optimise or --disable-optimise was given.
if test "${enable_optimise+set}" = set; then
echo $ac_n "checking for --enable-debug""... $ac_c" 1>&6
-echo "configure:2497: checking for --enable-debug" >&5
+echo "configure:2505: checking for --enable-debug" >&5
no_cache=0
# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
echo $ac_n "checking for --enable-precomp""... $ac_c" 1>&6
-echo "configure:2537: checking for --enable-precomp" >&5
+echo "configure:2545: checking for --enable-precomp" >&5
no_cache=0
# Check whether --enable-precomp or --disable-precomp was given.
if test "${enable_precomp+set}" = set; then
echo $ac_n "checking for --enable-debug_flag""... $ac_c" 1>&6
-echo "configure:2585: checking for --enable-debug_flag" >&5
+echo "configure:2593: checking for --enable-debug_flag" >&5
no_cache=0
# Check whether --enable-debug_flag or --disable-debug_flag was given.
if test "${enable_debug_flag+set}" = set; then
echo $ac_n "checking for --enable-debug_info""... $ac_c" 1>&6
-echo "configure:2624: checking for --enable-debug_info" >&5
+echo "configure:2632: checking for --enable-debug_info" >&5
no_cache=0
# Check whether --enable-debug_info or --disable-debug_info was given.
if test "${enable_debug_info+set}" = set; then
echo $ac_n "checking for --enable-debug_gdb""... $ac_c" 1>&6
-echo "configure:2663: checking for --enable-debug_gdb" >&5
+echo "configure:2671: checking for --enable-debug_gdb" >&5
no_cache=0
# Check whether --enable-debug_gdb or --disable-debug_gdb was given.
if test "${enable_debug_gdb+set}" = set; then
echo $ac_n "checking for --enable-debug_cntxt""... $ac_c" 1>&6
-echo "configure:2702: checking for --enable-debug_cntxt" >&5
+echo "configure:2710: checking for --enable-debug_cntxt" >&5
no_cache=0
# Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
if test "${enable_debug_cntxt+set}" = set; then
echo $ac_n "checking for --enable-mem_tracing""... $ac_c" 1>&6
-echo "configure:2741: checking for --enable-mem_tracing" >&5
+echo "configure:2749: checking for --enable-mem_tracing" >&5
no_cache=0
# Check whether --enable-mem_tracing or --disable-mem_tracing was given.
if test "${enable_mem_tracing+set}" = set; then
echo $ac_n "checking for --enable-profile""... $ac_c" 1>&6
-echo "configure:2780: checking for --enable-profile" >&5
+echo "configure:2788: checking for --enable-profile" >&5
no_cache=0
# Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
echo $ac_n "checking for --enable-no_rtti""... $ac_c" 1>&6
-echo "configure:2819: checking for --enable-no_rtti" >&5
+echo "configure:2827: checking for --enable-no_rtti" >&5
no_cache=0
# Check whether --enable-no_rtti or --disable-no_rtti was given.
if test "${enable_no_rtti+set}" = set; then
echo $ac_n "checking for --enable-no_exceptions""... $ac_c" 1>&6
-echo "configure:2858: checking for --enable-no_exceptions" >&5
+echo "configure:2866: checking for --enable-no_exceptions" >&5
no_cache=0
# Check whether --enable-no_exceptions or --disable-no_exceptions was given.
if test "${enable_no_exceptions+set}" = set; then
echo $ac_n "checking for --enable-permissive""... $ac_c" 1>&6
-echo "configure:2897: checking for --enable-permissive" >&5
+echo "configure:2905: checking for --enable-permissive" >&5
no_cache=0
# Check whether --enable-permissive or --disable-permissive was given.
if test "${enable_permissive+set}" = set; then
echo $ac_n "checking for --enable-no_deps""... $ac_c" 1>&6
-echo "configure:2936: checking for --enable-no_deps" >&5
+echo "configure:2944: checking for --enable-no_deps" >&5
no_cache=0
# Check whether --enable-no_deps or --disable-no_deps was given.
if test "${enable_no_deps+set}" = set; then
echo $ac_n "checking for --enable-compat20""... $ac_c" 1>&6
-echo "configure:2976: checking for --enable-compat20" >&5
+echo "configure:2984: checking for --enable-compat20" >&5
no_cache=0
# Check whether --enable-compat20 or --disable-compat20 was given.
if test "${enable_compat20+set}" = set; then
echo $ac_n "checking for --enable-compat22""... $ac_c" 1>&6
-echo "configure:3015: checking for --enable-compat22" >&5
+echo "configure:3023: checking for --enable-compat22" >&5
no_cache=0
# Check whether --enable-compat22 or --disable-compat22 was given.
if test "${enable_compat22+set}" = set; then
echo $ac_n "checking for --enable-intl""... $ac_c" 1>&6
-echo "configure:3056: checking for --enable-intl" >&5
+echo "configure:3064: checking for --enable-intl" >&5
no_cache=0
# Check whether --enable-intl or --disable-intl was given.
if test "${enable_intl+set}" = set; then
echo $ac_n "checking for --enable-config""... $ac_c" 1>&6
-echo "configure:3095: checking for --enable-config" >&5
+echo "configure:3103: checking for --enable-config" >&5
no_cache=0
# Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
echo $ac_n "checking for --enable-protocols""... $ac_c" 1>&6
-echo "configure:3135: checking for --enable-protocols" >&5
+echo "configure:3143: checking for --enable-protocols" >&5
no_cache=0
# Check whether --enable-protocols or --disable-protocols was given.
if test "${enable_protocols+set}" = set; then
echo $ac_n "checking for --enable-ftp""... $ac_c" 1>&6
-echo "configure:3174: checking for --enable-ftp" >&5
+echo "configure:3182: checking for --enable-ftp" >&5
no_cache=0
# Check whether --enable-ftp or --disable-ftp was given.
if test "${enable_ftp+set}" = set; then
echo $ac_n "checking for --enable-http""... $ac_c" 1>&6
-echo "configure:3213: checking for --enable-http" >&5
+echo "configure:3221: checking for --enable-http" >&5
no_cache=0
# Check whether --enable-http or --disable-http was given.
if test "${enable_http+set}" = set; then
echo $ac_n "checking for --enable-fileproto""... $ac_c" 1>&6
-echo "configure:3252: checking for --enable-fileproto" >&5
+echo "configure:3260: checking for --enable-fileproto" >&5
no_cache=0
# Check whether --enable-fileproto or --disable-fileproto was given.
if test "${enable_fileproto+set}" = set; then
echo $ac_n "checking for --enable-sockets""... $ac_c" 1>&6
-echo "configure:3291: checking for --enable-sockets" >&5
+echo "configure:3299: checking for --enable-sockets" >&5
no_cache=0
# Check whether --enable-sockets or --disable-sockets was given.
if test "${enable_sockets+set}" = set; then
echo $ac_n "checking for --enable-ipc""... $ac_c" 1>&6
-echo "configure:3331: checking for --enable-ipc" >&5
+echo "configure:3339: checking for --enable-ipc" >&5
no_cache=0
# Check whether --enable-ipc or --disable-ipc was given.
if test "${enable_ipc+set}" = set; then
echo $ac_n "checking for --enable-cmdline""... $ac_c" 1>&6
-echo "configure:3371: checking for --enable-cmdline" >&5
+echo "configure:3379: checking for --enable-cmdline" >&5
no_cache=0
# Check whether --enable-cmdline or --disable-cmdline was given.
if test "${enable_cmdline+set}" = set; then
echo $ac_n "checking for --enable-datetime""... $ac_c" 1>&6
-echo "configure:3410: checking for --enable-datetime" >&5
+echo "configure:3418: checking for --enable-datetime" >&5
no_cache=0
# Check whether --enable-datetime or --disable-datetime was given.
if test "${enable_datetime+set}" = set; then
echo $ac_n "checking for --enable-timedate""... $ac_c" 1>&6
-echo "configure:3449: checking for --enable-timedate" >&5
+echo "configure:3457: checking for --enable-timedate" >&5
no_cache=0
# Check whether --enable-timedate or --disable-timedate was given.
if test "${enable_timedate+set}" = set; then
echo $ac_n "checking for --enable-stopwatch""... $ac_c" 1>&6
-echo "configure:3488: checking for --enable-stopwatch" >&5
+echo "configure:3496: checking for --enable-stopwatch" >&5
no_cache=0
# Check whether --enable-stopwatch or --disable-stopwatch was given.
if test "${enable_stopwatch+set}" = set; then
echo $ac_n "checking for --enable-dialupman""... $ac_c" 1>&6
-echo "configure:3527: checking for --enable-dialupman" >&5
+echo "configure:3535: checking for --enable-dialupman" >&5
no_cache=0
# Check whether --enable-dialupman or --disable-dialupman was given.
if test "${enable_dialupman+set}" = set; then
echo $ac_n "checking for --enable-apple_ieee""... $ac_c" 1>&6
-echo "configure:3566: checking for --enable-apple_ieee" >&5
+echo "configure:3574: checking for --enable-apple_ieee" >&5
no_cache=0
# Check whether --enable-apple_ieee or --disable-apple_ieee was given.
if test "${enable_apple_ieee+set}" = set; then
echo $ac_n "checking for --enable-timer""... $ac_c" 1>&6
-echo "configure:3605: checking for --enable-timer" >&5
+echo "configure:3613: checking for --enable-timer" >&5
no_cache=0
# Check whether --enable-timer or --disable-timer was given.
if test "${enable_timer+set}" = set; then
echo $ac_n "checking for --enable-wave""... $ac_c" 1>&6
-echo "configure:3644: checking for --enable-wave" >&5
+echo "configure:3652: checking for --enable-wave" >&5
no_cache=0
# Check whether --enable-wave or --disable-wave was given.
if test "${enable_wave+set}" = set; then
echo $ac_n "checking for --enable-fraction""... $ac_c" 1>&6
-echo "configure:3683: checking for --enable-fraction" >&5
+echo "configure:3691: checking for --enable-fraction" >&5
no_cache=0
# Check whether --enable-fraction or --disable-fraction was given.
if test "${enable_fraction+set}" = set; then
echo $ac_n "checking for --enable-dynlib""... $ac_c" 1>&6
-echo "configure:3722: checking for --enable-dynlib" >&5
+echo "configure:3730: checking for --enable-dynlib" >&5
no_cache=0
# Check whether --enable-dynlib or --disable-dynlib was given.
if test "${enable_dynlib+set}" = set; then
echo $ac_n "checking for --enable-dynamicloader""... $ac_c" 1>&6
-echo "configure:3761: checking for --enable-dynamicloader" >&5
+echo "configure:3769: checking for --enable-dynamicloader" >&5
no_cache=0
# Check whether --enable-dynamicloader or --disable-dynamicloader was given.
if test "${enable_dynamicloader+set}" = set; then
echo $ac_n "checking for --enable-longlong""... $ac_c" 1>&6
-echo "configure:3800: checking for --enable-longlong" >&5
+echo "configure:3808: checking for --enable-longlong" >&5
no_cache=0
# Check whether --enable-longlong or --disable-longlong was given.
if test "${enable_longlong+set}" = set; then
echo $ac_n "checking for --enable-geometry""... $ac_c" 1>&6
-echo "configure:3839: checking for --enable-geometry" >&5
+echo "configure:3847: checking for --enable-geometry" >&5
no_cache=0
# Check whether --enable-geometry or --disable-geometry was given.
if test "${enable_geometry+set}" = set; then
echo $ac_n "checking for --enable-log""... $ac_c" 1>&6
-echo "configure:3878: checking for --enable-log" >&5
+echo "configure:3886: checking for --enable-log" >&5
no_cache=0
# Check whether --enable-log or --disable-log was given.
if test "${enable_log+set}" = set; then
echo $ac_n "checking for --enable-streams""... $ac_c" 1>&6
-echo "configure:3917: checking for --enable-streams" >&5
+echo "configure:3925: checking for --enable-streams" >&5
no_cache=0
# Check whether --enable-streams or --disable-streams was given.
if test "${enable_streams+set}" = set; then
echo $ac_n "checking for --enable-file""... $ac_c" 1>&6
-echo "configure:3956: checking for --enable-file" >&5
+echo "configure:3964: checking for --enable-file" >&5
no_cache=0
# Check whether --enable-file or --disable-file was given.
if test "${enable_file+set}" = set; then
echo $ac_n "checking for --enable-ffile""... $ac_c" 1>&6
-echo "configure:3995: checking for --enable-ffile" >&5
+echo "configure:4003: checking for --enable-ffile" >&5
no_cache=0
# Check whether --enable-ffile or --disable-ffile was given.
if test "${enable_ffile+set}" = set; then
echo $ac_n "checking for --enable-textbuf""... $ac_c" 1>&6
-echo "configure:4034: checking for --enable-textbuf" >&5
+echo "configure:4042: checking for --enable-textbuf" >&5
no_cache=0
# Check whether --enable-textbuf or --disable-textbuf was given.
if test "${enable_textbuf+set}" = set; then
echo $ac_n "checking for --enable-textfile""... $ac_c" 1>&6
-echo "configure:4073: checking for --enable-textfile" >&5
+echo "configure:4081: checking for --enable-textfile" >&5
no_cache=0
# Check whether --enable-textfile or --disable-textfile was given.
if test "${enable_textfile+set}" = set; then
echo $ac_n "checking for --enable-fontmap""... $ac_c" 1>&6
-echo "configure:4112: checking for --enable-fontmap" >&5
+echo "configure:4120: checking for --enable-fontmap" >&5
no_cache=0
# Check whether --enable-fontmap or --disable-fontmap was given.
if test "${enable_fontmap+set}" = set; then
echo $ac_n "checking for --enable-unicode""... $ac_c" 1>&6
-echo "configure:4151: checking for --enable-unicode" >&5
+echo "configure:4159: checking for --enable-unicode" >&5
no_cache=0
# Check whether --enable-unicode or --disable-unicode was given.
if test "${enable_unicode+set}" = set; then
echo $ac_n "checking for --enable-mslu""... $ac_c" 1>&6
-echo "configure:4190: checking for --enable-mslu" >&5
+echo "configure:4198: checking for --enable-mslu" >&5
no_cache=0
# Check whether --enable-mslu or --disable-mslu was given.
if test "${enable_mslu+set}" = set; then
echo $ac_n "checking for --enable-wxprintfv""... $ac_c" 1>&6
-echo "configure:4229: checking for --enable-wxprintfv" >&5
+echo "configure:4237: checking for --enable-wxprintfv" >&5
no_cache=0
# Check whether --enable-wxprintfv or --disable-wxprintfv was given.
if test "${enable_wxprintfv+set}" = set; then
echo $ac_n "checking for --enable-std_iostreams""... $ac_c" 1>&6
-echo "configure:4268: checking for --enable-std_iostreams" >&5
+echo "configure:4276: checking for --enable-std_iostreams" >&5
no_cache=0
# Check whether --enable-std_iostreams or --disable-std_iostreams was given.
if test "${enable_std_iostreams+set}" = set; then
echo $ac_n "checking for --enable-filesystem""... $ac_c" 1>&6
-echo "configure:4307: checking for --enable-filesystem" >&5
+echo "configure:4315: checking for --enable-filesystem" >&5
no_cache=0
# Check whether --enable-filesystem or --disable-filesystem was given.
if test "${enable_filesystem+set}" = set; then
echo $ac_n "checking for --enable-fs_inet""... $ac_c" 1>&6
-echo "configure:4346: checking for --enable-fs_inet" >&5
+echo "configure:4354: checking for --enable-fs_inet" >&5
no_cache=0
# Check whether --enable-fs_inet or --disable-fs_inet was given.
if test "${enable_fs_inet+set}" = set; then
echo $ac_n "checking for --enable-fs_zip""... $ac_c" 1>&6
-echo "configure:4385: checking for --enable-fs_zip" >&5
+echo "configure:4393: checking for --enable-fs_zip" >&5
no_cache=0
# Check whether --enable-fs_zip or --disable-fs_zip was given.
if test "${enable_fs_zip+set}" = set; then
echo $ac_n "checking for --enable-zipstream""... $ac_c" 1>&6
-echo "configure:4424: checking for --enable-zipstream" >&5
+echo "configure:4432: checking for --enable-zipstream" >&5
no_cache=0
# Check whether --enable-zipstream or --disable-zipstream was given.
if test "${enable_zipstream+set}" = set; then
echo $ac_n "checking for --enable-catch_segvs""... $ac_c" 1>&6
-echo "configure:4464: checking for --enable-catch_segvs" >&5
+echo "configure:4472: checking for --enable-catch_segvs" >&5
no_cache=0
# Check whether --enable-catch_segvs or --disable-catch_segvs was given.
if test "${enable_catch_segvs+set}" = set; then
echo $ac_n "checking for --enable-snglinst""... $ac_c" 1>&6
-echo "configure:4503: checking for --enable-snglinst" >&5
+echo "configure:4511: checking for --enable-snglinst" >&5
no_cache=0
# Check whether --enable-snglinst or --disable-snglinst was given.
if test "${enable_snglinst+set}" = set; then
echo $ac_n "checking for --enable-mimetype""... $ac_c" 1>&6
-echo "configure:4543: checking for --enable-mimetype" >&5
+echo "configure:4551: checking for --enable-mimetype" >&5
no_cache=0
# Check whether --enable-mimetype or --disable-mimetype was given.
if test "${enable_mimetype+set}" = set; then
echo $ac_n "checking for --enable-system_options""... $ac_c" 1>&6
-echo "configure:4582: checking for --enable-system_options" >&5
+echo "configure:4590: checking for --enable-system_options" >&5
no_cache=0
# Check whether --enable-system_options or --disable-system_options was given.
if test "${enable_system_options+set}" = set; then
echo $ac_n "checking for --enable-url""... $ac_c" 1>&6
-echo "configure:4622: checking for --enable-url" >&5
+echo "configure:4630: checking for --enable-url" >&5
no_cache=0
# Check whether --enable-url or --disable-url was given.
if test "${enable_url+set}" = set; then
echo $ac_n "checking for --enable-protocol""... $ac_c" 1>&6
-echo "configure:4661: checking for --enable-protocol" >&5
+echo "configure:4669: checking for --enable-protocol" >&5
no_cache=0
# Check whether --enable-protocol or --disable-protocol was given.
if test "${enable_protocol+set}" = set; then
echo $ac_n "checking for --enable-protocol_http""... $ac_c" 1>&6
-echo "configure:4700: checking for --enable-protocol_http" >&5
+echo "configure:4708: checking for --enable-protocol_http" >&5
no_cache=0
# Check whether --enable-protocol_http or --disable-protocol_http was given.
if test "${enable_protocol_http+set}" = set; then
echo $ac_n "checking for --enable-protocol_ftp""... $ac_c" 1>&6
-echo "configure:4739: checking for --enable-protocol_ftp" >&5
+echo "configure:4747: checking for --enable-protocol_ftp" >&5
no_cache=0
# Check whether --enable-protocol_ftp or --disable-protocol_ftp was given.
if test "${enable_protocol_ftp+set}" = set; then
echo $ac_n "checking for --enable-protocol_file""... $ac_c" 1>&6
-echo "configure:4778: checking for --enable-protocol_file" >&5
+echo "configure:4786: checking for --enable-protocol_file" >&5
no_cache=0
# Check whether --enable-protocol_file or --disable-protocol_file was given.
if test "${enable_protocol_file+set}" = set; then
echo $ac_n "checking for --enable-threads""... $ac_c" 1>&6
-echo "configure:4820: checking for --enable-threads" >&5
+echo "configure:4828: checking for --enable-threads" >&5
no_cache=0
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
echo $ac_n "checking for --enable-docview""... $ac_c" 1>&6
-echo "configure:4863: checking for --enable-docview" >&5
+echo "configure:4871: checking for --enable-docview" >&5
no_cache=0
# Check whether --enable-docview or --disable-docview was given.
if test "${enable_docview+set}" = set; then
echo $ac_n "checking for --enable-help""... $ac_c" 1>&6
-echo "configure:4902: checking for --enable-help" >&5
+echo "configure:4910: checking for --enable-help" >&5
no_cache=0
# Check whether --enable-help or --disable-help was given.
if test "${enable_help+set}" = set; then
echo $ac_n "checking for --enable-mshtmlhelp""... $ac_c" 1>&6
-echo "configure:4941: checking for --enable-mshtmlhelp" >&5
+echo "configure:4949: checking for --enable-mshtmlhelp" >&5
no_cache=0
# Check whether --enable-mshtmlhelp or --disable-mshtmlhelp was given.
if test "${enable_mshtmlhelp+set}" = set; then
echo $ac_n "checking for --enable-html""... $ac_c" 1>&6
-echo "configure:4980: checking for --enable-html" >&5
+echo "configure:4988: checking for --enable-html" >&5
no_cache=0
# Check whether --enable-html or --disable-html was given.
if test "${enable_html+set}" = set; then
echo $ac_n "checking for --enable-htmlhelp""... $ac_c" 1>&6
-echo "configure:5019: checking for --enable-htmlhelp" >&5
+echo "configure:5027: checking for --enable-htmlhelp" >&5
no_cache=0
# Check whether --enable-htmlhelp or --disable-htmlhelp was given.
if test "${enable_htmlhelp+set}" = set; then
echo $ac_n "checking for --enable-constraints""... $ac_c" 1>&6
-echo "configure:5058: checking for --enable-constraints" >&5
+echo "configure:5066: checking for --enable-constraints" >&5
no_cache=0
# Check whether --enable-constraints or --disable-constraints was given.
if test "${enable_constraints+set}" = set; then
echo $ac_n "checking for --enable-printarch""... $ac_c" 1>&6
-echo "configure:5097: checking for --enable-printarch" >&5
+echo "configure:5105: checking for --enable-printarch" >&5
no_cache=0
# Check whether --enable-printarch or --disable-printarch was given.
if test "${enable_printarch+set}" = set; then
echo $ac_n "checking for --enable-mdi""... $ac_c" 1>&6
-echo "configure:5136: checking for --enable-mdi" >&5
+echo "configure:5144: checking for --enable-mdi" >&5
no_cache=0
# Check whether --enable-mdi or --disable-mdi was given.
if test "${enable_mdi+set}" = set; then
echo $ac_n "checking for --enable-loggui""... $ac_c" 1>&6
-echo "configure:5175: checking for --enable-loggui" >&5
+echo "configure:5183: checking for --enable-loggui" >&5
no_cache=0
# Check whether --enable-loggui or --disable-loggui was given.
if test "${enable_loggui+set}" = set; then
echo $ac_n "checking for --enable-logwin""... $ac_c" 1>&6
-echo "configure:5214: checking for --enable-logwin" >&5
+echo "configure:5222: checking for --enable-logwin" >&5
no_cache=0
# Check whether --enable-logwin or --disable-logwin was given.
if test "${enable_logwin+set}" = set; then
echo $ac_n "checking for --enable-logdialog""... $ac_c" 1>&6
-echo "configure:5253: checking for --enable-logdialog" >&5
+echo "configure:5261: checking for --enable-logdialog" >&5
no_cache=0
# Check whether --enable-logdialog or --disable-logdialog was given.
if test "${enable_logdialog+set}" = set; then
echo $ac_n "checking for --enable-postscript""... $ac_c" 1>&6
-echo "configure:5293: checking for --enable-postscript" >&5
+echo "configure:5301: checking for --enable-postscript" >&5
no_cache=0
# Check whether --enable-postscript or --disable-postscript was given.
if test "${enable_postscript+set}" = set; then
echo $ac_n "checking for --enable-prologio""... $ac_c" 1>&6
-echo "configure:5335: checking for --enable-prologio" >&5
+echo "configure:5343: checking for --enable-prologio" >&5
no_cache=0
# Check whether --enable-prologio or --disable-prologio was given.
if test "${enable_prologio+set}" = set; then
echo $ac_n "checking for --enable-resources""... $ac_c" 1>&6
-echo "configure:5374: checking for --enable-resources" >&5
+echo "configure:5382: checking for --enable-resources" >&5
no_cache=0
# Check whether --enable-resources or --disable-resources was given.
if test "${enable_resources+set}" = set; then
echo $ac_n "checking for --enable-xresources""... $ac_c" 1>&6
-echo "configure:5414: checking for --enable-xresources" >&5
+echo "configure:5422: checking for --enable-xresources" >&5
no_cache=0
# Check whether --enable-xresources or --disable-xresources was given.
if test "${enable_xresources+set}" = set; then
echo $ac_n "checking for --enable-clipboard""... $ac_c" 1>&6
-echo "configure:5455: checking for --enable-clipboard" >&5
+echo "configure:5463: checking for --enable-clipboard" >&5
no_cache=0
# Check whether --enable-clipboard or --disable-clipboard was given.
if test "${enable_clipboard+set}" = set; then
echo $ac_n "checking for --enable-dnd""... $ac_c" 1>&6
-echo "configure:5494: checking for --enable-dnd" >&5
+echo "configure:5502: checking for --enable-dnd" >&5
no_cache=0
# Check whether --enable-dnd or --disable-dnd was given.
if test "${enable_dnd+set}" = set; then
echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
-echo "configure:5533: checking for --enable-metafile" >&5
+echo "configure:5541: checking for --enable-metafile" >&5
no_cache=0
# Check whether --enable-metafile or --disable-metafile was given.
if test "${enable_metafile+set}" = set; then
echo $ac_n "checking for --enable-treelayout""... $ac_c" 1>&6
-echo "configure:5573: checking for --enable-treelayout" >&5
+echo "configure:5581: checking for --enable-treelayout" >&5
no_cache=0
# Check whether --enable-treelayout or --disable-treelayout was given.
if test "${enable_treelayout+set}" = set; then
echo $ac_n "checking for --enable-controls""... $ac_c" 1>&6
-echo "configure:5614: checking for --enable-controls" >&5
+echo "configure:5622: checking for --enable-controls" >&5
no_cache=0
# Check whether --enable-controls or --disable-controls was given.
if test "${enable_controls+set}" = set; then
echo $ac_n "checking for --enable-accel""... $ac_c" 1>&6
-echo "configure:5734: checking for --enable-accel" >&5
+echo "configure:5742: checking for --enable-accel" >&5
no_cache=0
# Check whether --enable-accel or --disable-accel was given.
if test "${enable_accel+set}" = set; then
echo $ac_n "checking for --enable-button""... $ac_c" 1>&6
-echo "configure:5773: checking for --enable-button" >&5
+echo "configure:5781: checking for --enable-button" >&5
no_cache=0
# Check whether --enable-button or --disable-button was given.
if test "${enable_button+set}" = set; then
echo $ac_n "checking for --enable-bmpbutton""... $ac_c" 1>&6
-echo "configure:5812: checking for --enable-bmpbutton" >&5
+echo "configure:5820: checking for --enable-bmpbutton" >&5
no_cache=0
# Check whether --enable-bmpbutton or --disable-bmpbutton was given.
if test "${enable_bmpbutton+set}" = set; then
echo $ac_n "checking for --enable-calendar""... $ac_c" 1>&6
-echo "configure:5851: checking for --enable-calendar" >&5
+echo "configure:5859: checking for --enable-calendar" >&5
no_cache=0
# Check whether --enable-calendar or --disable-calendar was given.
if test "${enable_calendar+set}" = set; then
echo $ac_n "checking for --enable-caret""... $ac_c" 1>&6
-echo "configure:5890: checking for --enable-caret" >&5
+echo "configure:5898: checking for --enable-caret" >&5
no_cache=0
# Check whether --enable-caret or --disable-caret was given.
if test "${enable_caret+set}" = set; then
echo $ac_n "checking for --enable-checkbox""... $ac_c" 1>&6
-echo "configure:5929: checking for --enable-checkbox" >&5
+echo "configure:5937: checking for --enable-checkbox" >&5
no_cache=0
# Check whether --enable-checkbox or --disable-checkbox was given.
if test "${enable_checkbox+set}" = set; then
echo $ac_n "checking for --enable-checklst""... $ac_c" 1>&6
-echo "configure:5968: checking for --enable-checklst" >&5
+echo "configure:5976: checking for --enable-checklst" >&5
no_cache=0
# Check whether --enable-checklst or --disable-checklst was given.
if test "${enable_checklst+set}" = set; then
echo $ac_n "checking for --enable-choice""... $ac_c" 1>&6
-echo "configure:6007: checking for --enable-choice" >&5
+echo "configure:6015: checking for --enable-choice" >&5
no_cache=0
# Check whether --enable-choice or --disable-choice was given.
if test "${enable_choice+set}" = set; then
echo $ac_n "checking for --enable-combobox""... $ac_c" 1>&6
-echo "configure:6046: checking for --enable-combobox" >&5
+echo "configure:6054: checking for --enable-combobox" >&5
no_cache=0
# Check whether --enable-combobox or --disable-combobox was given.
if test "${enable_combobox+set}" = set; then
echo $ac_n "checking for --enable-gauge""... $ac_c" 1>&6
-echo "configure:6085: checking for --enable-gauge" >&5
+echo "configure:6093: checking for --enable-gauge" >&5
no_cache=0
# Check whether --enable-gauge or --disable-gauge was given.
if test "${enable_gauge+set}" = set; then
echo $ac_n "checking for --enable-grid""... $ac_c" 1>&6
-echo "configure:6124: checking for --enable-grid" >&5
+echo "configure:6132: checking for --enable-grid" >&5
no_cache=0
# Check whether --enable-grid or --disable-grid was given.
if test "${enable_grid+set}" = set; then
echo $ac_n "checking for --enable-newgrid""... $ac_c" 1>&6
-echo "configure:6163: checking for --enable-newgrid" >&5
+echo "configure:6171: checking for --enable-newgrid" >&5
no_cache=0
# Check whether --enable-newgrid or --disable-newgrid was given.
if test "${enable_newgrid+set}" = set; then
echo $ac_n "checking for --enable-imaglist""... $ac_c" 1>&6
-echo "configure:6202: checking for --enable-imaglist" >&5
+echo "configure:6210: checking for --enable-imaglist" >&5
no_cache=0
# Check whether --enable-imaglist or --disable-imaglist was given.
if test "${enable_imaglist+set}" = set; then
echo $ac_n "checking for --enable-listbox""... $ac_c" 1>&6
-echo "configure:6241: checking for --enable-listbox" >&5
+echo "configure:6249: checking for --enable-listbox" >&5
no_cache=0
# Check whether --enable-listbox or --disable-listbox was given.
if test "${enable_listbox+set}" = set; then
echo $ac_n "checking for --enable-listctrl""... $ac_c" 1>&6
-echo "configure:6280: checking for --enable-listctrl" >&5
+echo "configure:6288: checking for --enable-listctrl" >&5
no_cache=0
# Check whether --enable-listctrl or --disable-listctrl was given.
if test "${enable_listctrl+set}" = set; then
echo $ac_n "checking for --enable-notebook""... $ac_c" 1>&6
-echo "configure:6319: checking for --enable-notebook" >&5
+echo "configure:6327: checking for --enable-notebook" >&5
no_cache=0
# Check whether --enable-notebook or --disable-notebook was given.
if test "${enable_notebook+set}" = set; then
echo $ac_n "checking for --enable-propsheet""... $ac_c" 1>&6
-echo "configure:6358: checking for --enable-propsheet" >&5
+echo "configure:6366: checking for --enable-propsheet" >&5
no_cache=0
# Check whether --enable-propsheet or --disable-propsheet was given.
if test "${enable_propsheet+set}" = set; then
echo $ac_n "checking for --enable-radiobox""... $ac_c" 1>&6
-echo "configure:6397: checking for --enable-radiobox" >&5
+echo "configure:6405: checking for --enable-radiobox" >&5
no_cache=0
# Check whether --enable-radiobox or --disable-radiobox was given.
if test "${enable_radiobox+set}" = set; then
echo $ac_n "checking for --enable-radiobtn""... $ac_c" 1>&6
-echo "configure:6436: checking for --enable-radiobtn" >&5
+echo "configure:6444: checking for --enable-radiobtn" >&5
no_cache=0
# Check whether --enable-radiobtn or --disable-radiobtn was given.
if test "${enable_radiobtn+set}" = set; then
echo $ac_n "checking for --enable-sash""... $ac_c" 1>&6
-echo "configure:6475: checking for --enable-sash" >&5
+echo "configure:6483: checking for --enable-sash" >&5
no_cache=0
# Check whether --enable-sash or --disable-sash was given.
if test "${enable_sash+set}" = set; then
echo $ac_n "checking for --enable-scrollbar""... $ac_c" 1>&6
-echo "configure:6514: checking for --enable-scrollbar" >&5
+echo "configure:6522: checking for --enable-scrollbar" >&5
no_cache=0
# Check whether --enable-scrollbar or --disable-scrollbar was given.
if test "${enable_scrollbar+set}" = set; then
echo $ac_n "checking for --enable-slider""... $ac_c" 1>&6
-echo "configure:6553: checking for --enable-slider" >&5
+echo "configure:6561: checking for --enable-slider" >&5
no_cache=0
# Check whether --enable-slider or --disable-slider was given.
if test "${enable_slider+set}" = set; then
echo $ac_n "checking for --enable-spinbtn""... $ac_c" 1>&6
-echo "configure:6592: checking for --enable-spinbtn" >&5
+echo "configure:6600: checking for --enable-spinbtn" >&5
no_cache=0
# Check whether --enable-spinbtn or --disable-spinbtn was given.
if test "${enable_spinbtn+set}" = set; then
echo $ac_n "checking for --enable-spinctrl""... $ac_c" 1>&6
-echo "configure:6631: checking for --enable-spinctrl" >&5
+echo "configure:6639: checking for --enable-spinctrl" >&5
no_cache=0
# Check whether --enable-spinctrl or --disable-spinctrl was given.
if test "${enable_spinctrl+set}" = set; then
echo $ac_n "checking for --enable-splitter""... $ac_c" 1>&6
-echo "configure:6670: checking for --enable-splitter" >&5
+echo "configure:6678: checking for --enable-splitter" >&5
no_cache=0
# Check whether --enable-splitter or --disable-splitter was given.
if test "${enable_splitter+set}" = set; then
echo $ac_n "checking for --enable-statbmp""... $ac_c" 1>&6
-echo "configure:6709: checking for --enable-statbmp" >&5
+echo "configure:6717: checking for --enable-statbmp" >&5
no_cache=0
# Check whether --enable-statbmp or --disable-statbmp was given.
if test "${enable_statbmp+set}" = set; then
echo $ac_n "checking for --enable-statbox""... $ac_c" 1>&6
-echo "configure:6748: checking for --enable-statbox" >&5
+echo "configure:6756: checking for --enable-statbox" >&5
no_cache=0
# Check whether --enable-statbox or --disable-statbox was given.
if test "${enable_statbox+set}" = set; then
echo $ac_n "checking for --enable-statline""... $ac_c" 1>&6
-echo "configure:6787: checking for --enable-statline" >&5
+echo "configure:6795: checking for --enable-statline" >&5
no_cache=0
# Check whether --enable-statline or --disable-statline was given.
if test "${enable_statline+set}" = set; then
echo $ac_n "checking for --enable-stattext""... $ac_c" 1>&6
-echo "configure:6826: checking for --enable-stattext" >&5
+echo "configure:6834: checking for --enable-stattext" >&5
no_cache=0
# Check whether --enable-stattext or --disable-stattext was given.
if test "${enable_stattext+set}" = set; then
echo $ac_n "checking for --enable-statusbar""... $ac_c" 1>&6
-echo "configure:6865: checking for --enable-statusbar" >&5
+echo "configure:6873: checking for --enable-statusbar" >&5
no_cache=0
# Check whether --enable-statusbar or --disable-statusbar was given.
if test "${enable_statusbar+set}" = set; then
echo $ac_n "checking for --enable-tabdialog""... $ac_c" 1>&6
-echo "configure:6904: checking for --enable-tabdialog" >&5
+echo "configure:6912: checking for --enable-tabdialog" >&5
no_cache=0
# Check whether --enable-tabdialog or --disable-tabdialog was given.
if test "${enable_tabdialog+set}" = set; then
echo $ac_n "checking for --enable-textctrl""... $ac_c" 1>&6
-echo "configure:6943: checking for --enable-textctrl" >&5
+echo "configure:6951: checking for --enable-textctrl" >&5
no_cache=0
# Check whether --enable-textctrl or --disable-textctrl was given.
if test "${enable_textctrl+set}" = set; then
echo $ac_n "checking for --enable-togglebtn""... $ac_c" 1>&6
-echo "configure:6982: checking for --enable-togglebtn" >&5
+echo "configure:6990: checking for --enable-togglebtn" >&5
no_cache=0
# Check whether --enable-togglebtn or --disable-togglebtn was given.
if test "${enable_togglebtn+set}" = set; then
echo $ac_n "checking for --enable-toolbar""... $ac_c" 1>&6
-echo "configure:7021: checking for --enable-toolbar" >&5
+echo "configure:7029: checking for --enable-toolbar" >&5
no_cache=0
# Check whether --enable-toolbar or --disable-toolbar was given.
if test "${enable_toolbar+set}" = set; then
echo $ac_n "checking for --enable-tbarnative""... $ac_c" 1>&6
-echo "configure:7060: checking for --enable-tbarnative" >&5
+echo "configure:7068: checking for --enable-tbarnative" >&5
no_cache=0
# Check whether --enable-tbarnative or --disable-tbarnative was given.
if test "${enable_tbarnative+set}" = set; then
echo $ac_n "checking for --enable-tbarsmpl""... $ac_c" 1>&6
-echo "configure:7099: checking for --enable-tbarsmpl" >&5
+echo "configure:7107: checking for --enable-tbarsmpl" >&5
no_cache=0
# Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
if test "${enable_tbarsmpl+set}" = set; then
echo $ac_n "checking for --enable-treectrl""... $ac_c" 1>&6
-echo "configure:7138: checking for --enable-treectrl" >&5
+echo "configure:7146: checking for --enable-treectrl" >&5
no_cache=0
# Check whether --enable-treectrl or --disable-treectrl was given.
if test "${enable_treectrl+set}" = set; then
echo $ac_n "checking for --enable-tipwindow""... $ac_c" 1>&6
-echo "configure:7177: checking for --enable-tipwindow" >&5
+echo "configure:7185: checking for --enable-tipwindow" >&5
no_cache=0
# Check whether --enable-tipwindow or --disable-tipwindow was given.
if test "${enable_tipwindow+set}" = set; then
echo $ac_n "checking for --enable-popupwin""... $ac_c" 1>&6
-echo "configure:7216: checking for --enable-popupwin" >&5
+echo "configure:7224: checking for --enable-popupwin" >&5
no_cache=0
# Check whether --enable-popupwin or --disable-popupwin was given.
if test "${enable_popupwin+set}" = set; then
echo $ac_n "checking for --enable-commondlg""... $ac_c" 1>&6
-echo "configure:7257: checking for --enable-commondlg" >&5
+echo "configure:7265: checking for --enable-commondlg" >&5
no_cache=0
# Check whether --enable-commondlg or --disable-commondlg was given.
if test "${enable_commondlg+set}" = set; then
echo $ac_n "checking for --enable-choicedlg""... $ac_c" 1>&6
-echo "configure:7296: checking for --enable-choicedlg" >&5
+echo "configure:7304: checking for --enable-choicedlg" >&5
no_cache=0
# Check whether --enable-choicedlg or --disable-choicedlg was given.
if test "${enable_choicedlg+set}" = set; then
echo $ac_n "checking for --enable-coldlg""... $ac_c" 1>&6
-echo "configure:7335: checking for --enable-coldlg" >&5
+echo "configure:7343: checking for --enable-coldlg" >&5
no_cache=0
# Check whether --enable-coldlg or --disable-coldlg was given.
if test "${enable_coldlg+set}" = set; then
echo $ac_n "checking for --enable-filedlg""... $ac_c" 1>&6
-echo "configure:7374: checking for --enable-filedlg" >&5
+echo "configure:7382: checking for --enable-filedlg" >&5
no_cache=0
# Check whether --enable-filedlg or --disable-filedlg was given.
if test "${enable_filedlg+set}" = set; then
echo $ac_n "checking for --enable-finddlg""... $ac_c" 1>&6
-echo "configure:7413: checking for --enable-finddlg" >&5
+echo "configure:7421: checking for --enable-finddlg" >&5
no_cache=0
# Check whether --enable-finddlg or --disable-finddlg was given.
if test "${enable_finddlg+set}" = set; then
echo $ac_n "checking for --enable-fontdlg""... $ac_c" 1>&6
-echo "configure:7452: checking for --enable-fontdlg" >&5
+echo "configure:7460: checking for --enable-fontdlg" >&5
no_cache=0
# Check whether --enable-fontdlg or --disable-fontdlg was given.
if test "${enable_fontdlg+set}" = set; then
echo $ac_n "checking for --enable-dirdlg""... $ac_c" 1>&6
-echo "configure:7491: checking for --enable-dirdlg" >&5
+echo "configure:7499: checking for --enable-dirdlg" >&5
no_cache=0
# Check whether --enable-dirdlg or --disable-dirdlg was given.
if test "${enable_dirdlg+set}" = set; then
echo $ac_n "checking for --enable-msgdlg""... $ac_c" 1>&6
-echo "configure:7530: checking for --enable-msgdlg" >&5
+echo "configure:7538: checking for --enable-msgdlg" >&5
no_cache=0
# Check whether --enable-msgdlg or --disable-msgdlg was given.
if test "${enable_msgdlg+set}" = set; then
echo $ac_n "checking for --enable-numberdlg""... $ac_c" 1>&6
-echo "configure:7569: checking for --enable-numberdlg" >&5
+echo "configure:7577: checking for --enable-numberdlg" >&5
no_cache=0
# Check whether --enable-numberdlg or --disable-numberdlg was given.
if test "${enable_numberdlg+set}" = set; then
echo $ac_n "checking for --enable-splash""... $ac_c" 1>&6
-echo "configure:7608: checking for --enable-splash" >&5
+echo "configure:7616: checking for --enable-splash" >&5
no_cache=0
# Check whether --enable-splash or --disable-splash was given.
if test "${enable_splash+set}" = set; then
echo $ac_n "checking for --enable-textdlg""... $ac_c" 1>&6
-echo "configure:7647: checking for --enable-textdlg" >&5
+echo "configure:7655: checking for --enable-textdlg" >&5
no_cache=0
# Check whether --enable-textdlg or --disable-textdlg was given.
if test "${enable_textdlg+set}" = set; then
echo $ac_n "checking for --enable-tipdlg""... $ac_c" 1>&6
-echo "configure:7686: checking for --enable-tipdlg" >&5
+echo "configure:7694: checking for --enable-tipdlg" >&5
no_cache=0
# Check whether --enable-tipdlg or --disable-tipdlg was given.
if test "${enable_tipdlg+set}" = set; then
echo $ac_n "checking for --enable-progressdlg""... $ac_c" 1>&6
-echo "configure:7725: checking for --enable-progressdlg" >&5
+echo "configure:7733: checking for --enable-progressdlg" >&5
no_cache=0
# Check whether --enable-progressdlg or --disable-progressdlg was given.
if test "${enable_progressdlg+set}" = set; then
echo $ac_n "checking for --enable-wizarddlg""... $ac_c" 1>&6
-echo "configure:7764: checking for --enable-wizarddlg" >&5
+echo "configure:7772: checking for --enable-wizarddlg" >&5
no_cache=0
# Check whether --enable-wizarddlg or --disable-wizarddlg was given.
if test "${enable_wizarddlg+set}" = set; then
echo $ac_n "checking for --enable-menus""... $ac_c" 1>&6
-echo "configure:7805: checking for --enable-menus" >&5
+echo "configure:7813: checking for --enable-menus" >&5
no_cache=0
# Check whether --enable-menus or --disable-menus was given.
if test "${enable_menus+set}" = set; then
echo $ac_n "checking for --enable-miniframe""... $ac_c" 1>&6
-echo "configure:7844: checking for --enable-miniframe" >&5
+echo "configure:7852: checking for --enable-miniframe" >&5
no_cache=0
# Check whether --enable-miniframe or --disable-miniframe was given.
if test "${enable_miniframe+set}" = set; then
echo $ac_n "checking for --enable-tooltips""... $ac_c" 1>&6
-echo "configure:7883: checking for --enable-tooltips" >&5
+echo "configure:7891: checking for --enable-tooltips" >&5
no_cache=0
# Check whether --enable-tooltips or --disable-tooltips was given.
if test "${enable_tooltips+set}" = set; then
echo $ac_n "checking for --enable-splines""... $ac_c" 1>&6
-echo "configure:7922: checking for --enable-splines" >&5
+echo "configure:7930: checking for --enable-splines" >&5
no_cache=0
# Check whether --enable-splines or --disable-splines was given.
if test "${enable_splines+set}" = set; then
echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6
-echo "configure:7961: checking for --enable-validators" >&5
+echo "configure:7969: checking for --enable-validators" >&5
no_cache=0
# Check whether --enable-validators or --disable-validators was given.
if test "${enable_validators+set}" = set; then
echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6
-echo "configure:8000: checking for --enable-busyinfo" >&5
+echo "configure:8008: checking for --enable-busyinfo" >&5
no_cache=0
# Check whether --enable-busyinfo or --disable-busyinfo was given.
if test "${enable_busyinfo+set}" = set; then
echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6
-echo "configure:8039: checking for --enable-joystick" >&5
+echo "configure:8047: checking for --enable-joystick" >&5
no_cache=0
# Check whether --enable-joystick or --disable-joystick was given.
if test "${enable_joystick+set}" = set; then
echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
-echo "configure:8078: checking for --enable-metafile" >&5
+echo "configure:8086: checking for --enable-metafile" >&5
no_cache=0
# Check whether --enable-metafile or --disable-metafile was given.
if test "${enable_metafile+set}" = set; then
echo $ac_n "checking for --enable-dragimage""... $ac_c" 1>&6
-echo "configure:8117: checking for --enable-dragimage" >&5
+echo "configure:8125: checking for --enable-dragimage" >&5
no_cache=0
# Check whether --enable-dragimage or --disable-dragimage was given.
if test "${enable_dragimage+set}" = set; then
echo $ac_n "checking for --enable-palette""... $ac_c" 1>&6
-echo "configure:8158: checking for --enable-palette" >&5
+echo "configure:8166: checking for --enable-palette" >&5
no_cache=0
# Check whether --enable-palette or --disable-palette was given.
if test "${enable_palette+set}" = set; then
echo $ac_n "checking for --enable-image""... $ac_c" 1>&6
-echo "configure:8197: checking for --enable-image" >&5
+echo "configure:8205: checking for --enable-image" >&5
no_cache=0
# Check whether --enable-image or --disable-image was given.
if test "${enable_image+set}" = set; then
echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6
-echo "configure:8236: checking for --enable-gif" >&5
+echo "configure:8244: checking for --enable-gif" >&5
no_cache=0
# Check whether --enable-gif or --disable-gif was given.
if test "${enable_gif+set}" = set; then
echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6
-echo "configure:8275: checking for --enable-pcx" >&5
+echo "configure:8283: checking for --enable-pcx" >&5
no_cache=0
# Check whether --enable-pcx or --disable-pcx was given.
if test "${enable_pcx+set}" = set; then
echo $ac_n "checking for --enable-iff""... $ac_c" 1>&6
-echo "configure:8314: checking for --enable-iff" >&5
+echo "configure:8322: checking for --enable-iff" >&5
no_cache=0
# Check whether --enable-iff or --disable-iff was given.
if test "${enable_iff+set}" = set; then
echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
-echo "configure:8353: checking for --enable-pnm" >&5
+echo "configure:8361: checking for --enable-pnm" >&5
no_cache=0
# Check whether --enable-pnm or --disable-pnm was given.
if test "${enable_pnm+set}" = set; then
echo $ac_n "checking for --enable-xpm""... $ac_c" 1>&6
-echo "configure:8392: checking for --enable-xpm" >&5
+echo "configure:8400: checking for --enable-xpm" >&5
no_cache=0
# Check whether --enable-xpm or --disable-xpm was given.
if test "${enable_xpm+set}" = set; then
echo $ac_n "checking for --enable-ico_cur""... $ac_c" 1>&6
-echo "configure:8431: checking for --enable-ico_cur" >&5
+echo "configure:8439: checking for --enable-ico_cur" >&5
no_cache=0
# Check whether --enable-ico_cur or --disable-ico_cur was given.
if test "${enable_ico_cur+set}" = set; then
fi
+case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ LEX_STEM="lexyy"
+ ;;
+ *)
+ PATH_IFS=':'
+ LEX_STEM="lex.yy"
+ ;;
+esac
+
+
echo "saving argument cache $wx_arg_cache_file"
mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file}
echo $ac_n "checking for toolkit""... $ac_c" 1>&6
-echo "configure:8478: checking for toolkit" >&5
+echo "configure:8497: checking for toolkit" >&5
if test "$wxUSE_GUI" = "yes"; then
NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} \
+ ${wxUSE_WINE:-0} + ${wxUSE_MSW:-0} + ${wxUSE_MGL:-0} + ${wxUSE_MICROWIN:-0} + ${wxUSE_X11:-0}`
- case "${host}" in
+ case "${host}" in
*-pc-os2_emx | *-pc-os2-emx )
- # PATH_IFS is autodetected by OS/2's configure (usually ';')
NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
- LEX_STEM="lexyy"
- ;;
- *)
- PATH_IFS=':'
- LEX_STEM="lex.yy"
- ;;
esac
case "$NUM_TOOLKITS" in
fi
done
else
- PATH_IFS=':'
echo "$ac_t""base ($host_alias hosted) only" 1>&6
fi
if test "$build" != "$host" ; then
- if test "$USE_WIN32" = 1 -o "$USE_DOS" = 1 ; then
+ if test "$USE_WIN32" = 1 -o "$USE_DOS" = 1 -o "$USE_UNIX"; then
CC=$host_alias-gcc
CXX=$host_alias-c++
AR=$host_alias-ar
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8616: checking for $ac_word" >&5
+echo "configure:8627: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8646: checking for $ac_word" >&5
+echo "configure:8657: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8697: checking for $ac_word" >&5
+echo "configure:8708: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:8729: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:8740: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 8740 "configure"
+#line 8751 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:8745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:8771: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:8782: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:8776: checking whether we are using GNU C" >&5
+echo "configure:8787: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8785: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:8804: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:8815: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`
-
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:8839: checking how to run the C preprocessor" >&5
+echo "configure:8848: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 8854 "configure"
+#line 8863 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8860: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 8871 "configure"
+#line 8880 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8877: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8886: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 8888 "configure"
+#line 8897 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:8920: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:8929: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
-#line 8926 "configure"
+#line 8935 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
-#line 8944 "configure"
+#line 8953 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8980: checking for $ac_word" >&5
+echo "configure:8989: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:9012: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:9021: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 9023 "configure"
+#line 9032 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
-if { (eval echo configure:9028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9037: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:9054: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:9063: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:9059: checking whether we are using GNU C++" >&5
+echo "configure:9068: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9077: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:9087: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:9096: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-CXXFLAGS=`echo "$CXXFLAGS" | sed 's/-g//g'`
-
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9132: checking for $ac_word" >&5
+echo "configure:9139: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9163: checking for $ac_word" >&5
+echo "configure:9170: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:9203: checking for a BSD compatible install" >&5
+echo "configure:9210: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9268: checking for $ac_word" >&5
+echo "configure:9275: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking if make is GNU make""... $ac_c" 1>&6
-echo "configure:9297: checking if make is GNU make" >&5
+echo "configure:9304: checking if make is GNU make" >&5
if eval "test \"`echo '$''{'wx_cv_prog_makeisgnu'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if ( ${SHELL-sh} -c "${MAKE-make} --version" 2> /dev/null |
- egrep -qs GNU); then
+ egrep -s GNU > /dev/null); then
wx_cv_prog_makeisgnu="yes"
else
wx_cv_prog_makeisgnu="no"
if test "x$wx_cv_prog_makeisgnu" != "xyes"; then
echo $ac_n "checking if make supports VPATH""... $ac_c" 1>&6
-echo "configure:9323: checking if make supports VPATH" >&5
+echo "configure:9330: checking if make supports VPATH" >&5
if eval "test \"`echo '$''{'wx_cv_prog_makevpath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9370: checking for $ac_word" >&5
+echo "configure:9377: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9404: checking for $ac_word" >&5
+echo "configure:9411: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:9438: checking for yywrap in -l$ac_lib" >&5
+echo "configure:9445: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9446 "configure"
+#line 9453 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:9457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:9481: checking whether ln -s works" >&5
+echo "configure:9488: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$wxUSE_REGEX" = "sys" -o "$wxUSE_REGEX" = "yes" ; then
ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for regex.h""... $ac_c" 1>&6
-echo "configure:9633: checking for regex.h" >&5
+echo "configure:9640: checking for regex.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9638 "configure"
+#line 9645 "configure"
#include "confdefs.h"
#include <regex.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9643: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in regcomp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:9662: checking for $ac_func" >&5
+echo "configure:9669: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9667 "configure"
+#line 9674 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:9690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$wxUSE_ZLIB" = "sys" -o "$wxUSE_ZLIB" = "yes" ; then
ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for zlib.h""... $ac_c" 1>&6
-echo "configure:9748: checking for zlib.h" >&5
+echo "configure:9755: checking for zlib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9753 "configure"
+#line 9760 "configure"
#include "confdefs.h"
#include <zlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:9775: checking for deflate in -lz" >&5
+echo "configure:9782: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9783 "configure"
+#line 9790 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:9794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_LIBPNG" = "sys" -o "$wxUSE_LIBPNG" = "yes" ; then
ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for png.h""... $ac_c" 1>&6
-echo "configure:9859: checking for png.h" >&5
+echo "configure:9866: checking for png.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9864 "configure"
+#line 9871 "configure"
#include "confdefs.h"
#include <png.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6
-echo "configure:9886: checking for png_check_sig in -lpng" >&5
+echo "configure:9893: checking for png_check_sig in -lpng" >&5
ac_lib_var=`echo png'_'png_check_sig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpng -lz -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9894 "configure"
+#line 9901 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
png_check_sig()
; return 0; }
EOF
-if { (eval echo configure:9905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MGL" != 1 ; then
if test "$wxUSE_LIBJPEG" = "sys" -o "$wxUSE_LIBJPEG" = "yes" ; then
echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
-echo "configure:9968: checking for jpeglib.h" >&5
+echo "configure:9975: checking for jpeglib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_jpeglib_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9973 "configure"
+#line 9980 "configure"
#include "confdefs.h"
#undef HAVE_STDLIB_H
; return 0; }
EOF
-if { (eval echo configure:9985: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9992: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_jpeglib_h=yes
else
if test "$ac_cv_header_jpeglib_h" = "yes"; then
echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6
-echo "configure:10003: checking for jpeg_read_header in -ljpeg" >&5
+echo "configure:10010: checking for jpeg_read_header in -ljpeg" >&5
ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ljpeg $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10011 "configure"
+#line 10018 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jpeg_read_header()
; return 0; }
EOF
-if { (eval echo configure:10022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_LIBTIFF" = "sys" -o "$wxUSE_LIBTIFF" = "yes" ; then
ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
-echo "configure:10074: checking for tiffio.h" >&5
+echo "configure:10081: checking for tiffio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10079 "configure"
+#line 10086 "configure"
#include "confdefs.h"
#include <tiffio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10091: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6
-echo "configure:10101: checking for TIFFError in -ltiff" >&5
+echo "configure:10108: checking for TIFFError in -ltiff" >&5
ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltiff -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10109 "configure"
+#line 10116 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
TIFFError()
; return 0; }
EOF
-if { (eval echo configure:10120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10175: checking for $ac_hdr" >&5
+echo "configure:10182: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10180 "configure"
+#line 10187 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10185: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10192: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for windows.h""... $ac_c" 1>&6
-echo "configure:10213: checking for windows.h" >&5
+echo "configure:10220: checking for windows.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10218 "configure"
+#line 10225 "configure"
#include "confdefs.h"
#include <windows.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10223: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10230: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if w32api has good enough MSIE support""... $ac_c" 1>&6
-echo "configure:10249: checking if w32api has good enough MSIE support" >&5
+echo "configure:10256: checking if w32api has good enough MSIE support" >&5
if eval "test \"`echo '$''{'wx_cv_w32api_win32_ie'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10255 "configure"
+#line 10262 "configure"
#include "confdefs.h"
#include <w32api.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:10271: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_w32api_win32_ie=yes
if test "$wxUSE_GTK" = 1; then
echo $ac_n "checking for GTK+ version""... $ac_c" 1>&6
-echo "configure:10330: checking for GTK+ version" >&5
+echo "configure:10337: checking for GTK+ version" >&5
gtk_version_cached=1
if eval "test \"`echo '$''{'wx_cv_lib_gtk'+set}'`\" = set"; then
wx_cv_lib_gtk=
if test "x$wxUSE_GTK2" = "xyes"; then
- # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
-if test "${with_gtk_prefix+set}" = set; then
- withval="$with_gtk_prefix"
- gtk_config_prefix="$withval"
-else
- gtk_config_prefix=""
-fi
-
-# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
-if test "${with_gtk_exec_prefix+set}" = set; then
- withval="$with_gtk_exec_prefix"
- gtk_config_exec_prefix="$withval"
-else
- gtk_config_exec_prefix=""
-fi
-
-# Check whether --enable-gtktest or --disable-gtktest was given.
+ # Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
enableval="$enable_gtktest"
:
fi
+ pkg_config_args=gtk+-2.0
for module in . $GTK_MODULES
do
case "$module" in
- gthread)
- gtk_config_args="$gtk_config_args gthread"
+ gthread)
+ pkg_config_args="$pkg_config_args gthread-2.0"
;;
esac
done
- if test x$gtk_config_exec_prefix != x ; then
- gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
- if test x${GTK_CONFIG_2_0+set} != xset ; then
- GTK_CONFIG_2_0=$gtk_config_exec_prefix/bin/gtk-config-2.0
- fi
- fi
- if test x$gtk_config_prefix != x ; then
- gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
- if test x${GTK_CONFIG_2_0+set} != xset ; then
- GTK_CONFIG_2_0=$gtk_config_prefix/bin/gtk-config-2.0
- fi
- fi
+ no_gtk=""
- # Extract the first word of "gtk-config-2.0", so it can be a program name with args.
-set dummy gtk-config-2.0; ac_word=$2
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:10397: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG_2_0'+set}'`\" = set"; then
+echo "configure:10378: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- case "$GTK_CONFIG_2_0" in
+ case "$PKG_CONFIG" in
/*)
- ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a path.
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a dos path.
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GTK_CONFIG_2_0="$ac_dir/$ac_word"
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GTK_CONFIG_2_0" && ac_cv_path_GTK_CONFIG_2_0="no"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
;;
esac
fi
-GTK_CONFIG_2_0="$ac_cv_path_GTK_CONFIG_2_0"
-if test -n "$GTK_CONFIG_2_0"; then
- echo "$ac_t""$GTK_CONFIG_2_0" 1>&6
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- min_gtk_version=1.3.1
- echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:10432: checking for GTK - version >= $min_gtk_version" >&5
- no_gtk=""
- if test "$GTK_CONFIG_2_0" = "no" ; then
- no_gtk=yes
+
+ if test x$PKG_CONFIG != xno ; then
+ if pkg-config --atleast-pkgconfig-version 0.7 ; then
+ :
+ else
+ echo *** pkg-config too old; version 0.7 or better required.
+ no_gtk=yes
+ PKG_CONFIG=no
+ fi
else
- GTK_CFLAGS=`$GTK_CONFIG_2_0 $gtk_config_args --cflags`
- GTK_LIBS=`$GTK_CONFIG_2_0 $gtk_config_args --libs`
- gtk_config_major_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ no_gtk=yes
+ fi
+
+ min_gtk_version=2.0.0
+ echo $ac_n "checking for GTK+ - version >= $min_gtk_version""... $ac_c" 1>&6
+echo "configure:10426: checking for GTK+ - version >= $min_gtk_version" >&5
+
+ if test x$PKG_CONFIG != xno ; then
+ ## don't try to run the test against uninstalled libtool libs
+ if $PKG_CONFIG --uninstalled $pkg_config_args; then
+ echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
+ enable_gtktest=no
+ fi
+
+ if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
+ :
+ else
+ no_gtk=yes
+ fi
+ fi
+
+ if test x"$no_gtk" = x ; then
+ GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
+ GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
+ gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
- gtk_config_minor_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
- gtk_config_micro_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
+ gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 10455 "configure"
+#line 10461 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
-int
+int
main ()
{
int major, minor, micro;
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
- printf("\n*** 'gtk-config-2.0 --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf ("*** was found! If gtk-config-2.0 was correct, then it is best\n");
+ printf ("*** was found! If pkg-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
- printf("*** If gtk-config-2.0 was wrong, set the environment variable GTK_CONFIG_2_0\n");
- printf("*** to point to the correct copy of gtk-config-2.0, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
- }
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
+ printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
+ printf("*** to point to the correct configuration files\n");
+ }
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
- (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
- GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
}
-#endif /* defined (GTK_MAJOR_VERSION) ... */
else
{
if ((gtk_major_version > major) ||
printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
- major, minor, micro);
+ major, minor, micro);
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the gtk-config-2.0 shell script is\n");
+ printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GTK+, but you can also set the GTK_CONFIG_2_0 environment to point to the\n");
- printf("*** correct copy of gtk-config-2.0. (In this case, you will have to\n");
+ printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
+ printf("*** correct copy of pkg-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
EOF
-if { (eval echo configure:10533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
if test "x$no_gtk" = x ; then
echo "$ac_t""yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" 1>&6
- wx_cv_lib_gtk=2.0
+ wx_cv_lib_gtk=2.0
else
echo "$ac_t""no" 1>&6
- if test "$GTK_CONFIG_2_0" = "no" ; then
- echo "*** The gtk-config-2.0 script installed by GTK could not be found"
- echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GTK_CONFIG_2_0 environment variable to the"
- echo "*** full path to gtk-config-2.0."
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** A new enough version of pkg-config was not found."
+ echo "*** See http://pkgconfig.sourceforge.net"
else
if test -f conf.gtktest ; then
:
else
- echo "*** Could not run GTK test program, checking why..."
+ echo "*** Could not run GTK+ test program, checking why..."
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10567 "configure"
+#line 10568 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:10577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GTK or finding the wrong"
- echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+ echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
+ echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
- echo "***"
+ echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
- echo "*** rpm --erase --nodeps gtk gtk-devel"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GTK was incorrectly installed"
- echo "*** or that you have moved GTK since it was installed. In the latter case, you"
- echo "*** may want to edit the gtk-config-2.0 script: $GTK_CONFIG_2_0"
+ echo "*** exact error that occured. This usually means GTK+ was incorrectly installed"
+ echo "*** or that you have moved GTK+ since it was installed. In the latter case, you"
+ echo "*** may want to edit the pkg-config script: $PKG_CONFIG"
fi
rm -f conftest*
CFLAGS="$ac_save_CFLAGS"
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:10668: checking for $ac_word" >&5
+echo "configure:10664: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.7
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:10703: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:10699: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 10726 "configure"
+#line 10722 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:10804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10838 "configure"
+#line 10834 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:10848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10844: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:10939: checking for $ac_word" >&5
+echo "configure:10935: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.3
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:10974: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:10970: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 10997 "configure"
+#line 10993 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:11075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11109 "configure"
+#line 11105 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:11119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
GUIDIST=GTK_DIST
echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
-echo "configure:11199: checking for gdk_im_open in -lgdk" >&5
+echo "configure:11195: checking for gdk_im_open in -lgdk" >&5
ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgdk $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11207 "configure"
+#line 11203 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gdk_im_open()
; return 0; }
EOF
-if { (eval echo configure:11218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MGL" = 1; then
echo $ac_n "checking for SciTech MGL library""... $ac_c" 1>&6
-echo "configure:11245: checking for SciTech MGL library" >&5
+echo "configure:11241: checking for SciTech MGL library" >&5
if test "x$MGL_ROOT" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MGL library. Make sure MGL_ROOT is set." 1>&2; exit 1; }
if test "$wxUSE_MICROWIN" = 1; then
echo $ac_n "checking for MicroWindows""... $ac_c" 1>&6
-echo "configure:11291: checking for MicroWindows" >&5
+echo "configure:11287: checking for MicroWindows" >&5
if test "x$MICROWINDOWS" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MicroWindows library. Make sure MICROWINDOWS is set." 1>&2; exit 1; }
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:11321: checking for X" >&5
+echo "configure:11317: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 11383 "configure"
+#line 11379 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11388: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11384: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11457 "configure"
+#line 11453 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:11464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:11570: checking whether -R must be followed by a space" >&5
+echo "configure:11566: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 11573 "configure"
+#line 11569 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:11580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 11596 "configure"
+#line 11592 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:11603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:11635: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:11631: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11643 "configure"
+#line 11639 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:11654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:11676: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:11672: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11684 "configure"
+#line 11680 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:11695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:11724: checking for gethostbyname" >&5
+echo "configure:11720: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11729 "configure"
+#line 11725 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:11752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11748: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:11773: checking for gethostbyname in -lnsl" >&5
+echo "configure:11769: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11781 "configure"
+#line 11777 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:11792: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:11822: checking for connect" >&5
+echo "configure:11818: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11827 "configure"
+#line 11823 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:11850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:11871: checking for connect in -lsocket" >&5
+echo "configure:11867: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11879 "configure"
+#line 11875 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:11890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:11914: checking for remove" >&5
+echo "configure:11910: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11919 "configure"
+#line 11915 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:11942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:11963: checking for remove in -lposix" >&5
+echo "configure:11959: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11971 "configure"
+#line 11967 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:11982: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:12006: checking for shmat" >&5
+echo "configure:12002: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12011 "configure"
+#line 12007 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:12034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12030: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:12055: checking for shmat in -lipc" >&5
+echo "configure:12051: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12063 "configure"
+#line 12059 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:12074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:12107: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:12103: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12115 "configure"
+#line 12111 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:12126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
AFMINSTALL=afminstall
COMPILED_X_PROGRAM=0
- if test "$wxUSE_NANOX" = 1; then
+ if test "$wxUSE_NANOX" = "yes"; then
echo $ac_n "checking for MicroWindows/NanoX distribution""... $ac_c" 1>&6
-echo "configure:12162: checking for MicroWindows/NanoX distribution" >&5
+echo "configure:12158: checking for MicroWindows/NanoX distribution" >&5
if test "x$MICROWIN" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MicroWindows library. Make sure MICROWIN is set." 1>&2; exit 1; }
else
echo "$ac_t""$MICROWIN" 1>&6
+ cat >> confdefs.h <<\EOF
+#define wxUSE_NANOX 1
+EOF
+
fi
fi
rm -f conftest*
fi
- if test "$wxUSE_NANOX" = 1; then
+ if test "$wxUSE_NANOX" = "yes"; then
TOOLKIT_INCLUDE="-I\$(top_srcdir)/include/wx/x11/nanox -I\$(MICROWIN)/src/include $TOOLKIT_INCLUDE"
- TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__NANOX__"
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY \$MICROWIN/src/lib/libnano-X.a \$MICROWIN/src/lib/libmwengine.a \$MICROWIN/src/lib/libmwfonts.a \$MICROWIN/src/lib/libmwdrivers.a \$MICROWIN/src/lib/libmwobjects.a"
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__NANOX__ -DMWPIXEL_FORMAT=MWPF_TRUECOLOR0888 -DHAVE_FILEIO -DHAVE_BMP_SUPPORT=1 -DHAVE_GIF_SUPPORT=1 -DHAVE_PNM_SUPPORT=1 -DHAVE_XPM_SUPPORT=1 -DLINUX=1 -DUNIX=1 -DUSE_EXPOSURE -DSCREEN_HEIGHT=480 -DSCREEN_WIDTH=640 -DSCREEN_DEPTH=4 -DX11=1"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY \$(MICROWIN)/src/lib/libnano-X.a"
else
GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lX11$xpm_link"
fi
ALL_HEADERS="\$(ALL_HEADERS) \${UNIV_HEADERS}"
PORT_FILES="${PORT_FILES} \${top_srcdir}/src/univ/files.lst"
- TOOLKIT_VPATH="\${top_srcdir}/src/univ${PATH_IFS}\${top_srcdir}/src/univ/themes${PATH_IFS}\${top_srcdir}/src/${TOOLKIT_DIR}"
+ if test "$wxUSE_X11" = 1; then
+ TOOLKIT_VPATH="\${top_srcdir}/src/${TOOLKIT_DIR}${PATH_IFS}\${top_srcdir}/src/univ${PATH_IFS}\${top_srcdir}/src/univ/themes"
+ else
+ TOOLKIT_VPATH="\${top_srcdir}/src/univ${PATH_IFS}\${top_srcdir}/src/univ/themes${PATH_IFS}\${top_srcdir}/src/${TOOLKIT_DIR}"
+ fi
TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXUNIVERSAL__"
WIDGET_SET=univ
else
ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6
-echo "configure:13263: checking for GL/gl.h" >&5
+echo "configure:13267: checking for GL/gl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13268 "configure"
+#line 13272 "configure"
#include "confdefs.h"
#include <GL/gl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13273: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13277: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for -lGL""... $ac_c" 1>&6
-echo "configure:13291: checking for -lGL" >&5
+echo "configure:13295: checking for -lGL" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for -lMesaGL""... $ac_c" 1>&6
-echo "configure:13324: checking for -lMesaGL" >&5
+echo "configure:13328: checking for -lMesaGL" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
*-*-linux* )
if test "$GCC" != "yes"; then
echo $ac_n "checking for Intel compiler""... $ac_c" 1>&6
-echo "configure:13514: checking for Intel compiler" >&5
+echo "configure:13518: checking for Intel compiler" >&5
if eval "test \"`echo '$''{'wx_cv_prog_icc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13520 "configure"
+#line 13524 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:13531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:13535: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_prog_icc=yes
else
;;
*-*-darwin* )
- CFLAGS="$CFLAGS -fno-common -DDYLIB_INIT"
+ CFLAGS="$CFLAGS -fno-common -DDYLIB_INIT"
CXXFLAGS="$CXXFLAGS -fno-common -DDYLIB_INIT"
SHARED_LD="$CXX -dynamiclib -init _wxWindowsDylibInit -o"
PIC_FLAG="-dynamic -fPIC"
+ SONAME_FLAGS="-compatibility_version ${WX_RELEASE} -current_version ${WX_VERSION}"
+ SONAME_FLAGS_GL=${SONAME_FLAGS}
;;
*-*-aix* )
# Extract the first word of "Rez", so it can be a program name with args.
set dummy Rez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:13652: checking for $ac_word" >&5
+echo "configure:13658: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RESCOMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "DeRez", so it can be a program name with args.
set dummy DeRez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:13682: checking for $ac_word" >&5
+echo "configure:13688: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DEREZ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ MACOSX_BUNDLE="bundle"
LIBWXMACRES="\$(top_builddir)/lib/lib${WX_LIBRARY}.r"
LIBWXMACRESCOMP="\$(RESCOMP) Carbon.r -t APPL ${LIBWXMACRES} -o \$(BIN_PROGRAM)"
LIBWXMACRESWXCONFIG="${RESCOMP} Carbon.r -t APPL \${prefix}/lib/${WX_RESOURCES_MACOSX_COMPILED} -o"
+else
+ if test "$wxUSE_PM" = 1; then
+ LIBWXMACRESCOMP="emxbind -ep \$(BIN_PROGRAM)"
+ fi
fi
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13720: checking for $ac_hdr" >&5
+echo "configure:13731: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13725 "configure"
+#line 13736 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13762: checking for $ac_hdr" >&5
+echo "configure:13773: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13767 "configure"
+#line 13778 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13772: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13783: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13802: checking for $ac_hdr" >&5
+echo "configure:13813: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13807 "configure"
+#line 13818 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13812: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13823: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13842: checking for $ac_hdr" >&5
+echo "configure:13853: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13847 "configure"
+#line 13858 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13863: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13882: checking for $ac_hdr" >&5
+echo "configure:13893: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13887 "configure"
+#line 13898 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13892: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
-for ac_hdr in wcstr.h
+
+if test "$ac_cv_header_wchar_h" != "yes"; then
+ for ac_hdr in wcstr.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13922: checking for $ac_hdr" >&5
+echo "configure:13935: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13927 "configure"
+#line 13940 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13932: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13945: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
-for ac_hdr in wctype.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13962: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 13967 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13972: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
fi
-done
+
for ac_hdr in fnmatch.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:14002: checking for $ac_hdr" >&5
+echo "configure:13978: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14007 "configure"
+#line 13983 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:14012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:14042: checking for $ac_hdr" >&5
+echo "configure:14018: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14047 "configure"
+#line 14023 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:14052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:14085: checking for $ac_hdr" >&5
+echo "configure:14061: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14090 "configure"
+#line 14066 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:14095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:14126: checking for ANSI C header files" >&5
+echo "configure:14102: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14131 "configure"
+#line 14107 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:14139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 14156 "configure"
+#line 14132 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 14174 "configure"
+#line 14150 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 14195 "configure"
+#line 14171 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:14206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:14182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:14230: checking for mode_t" >&5
+echo "configure:14206: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14235 "configure"
+#line 14211 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:14263: checking for off_t" >&5
+echo "configure:14239: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14268 "configure"
+#line 14244 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:14296: checking for pid_t" >&5
+echo "configure:14272: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14301 "configure"
+#line 14277 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:14329: checking for size_t" >&5
+echo "configure:14305: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14334 "configure"
+#line 14310 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:14362: checking for uid_t in sys/types.h" >&5
+echo "configure:14338: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14367 "configure"
+#line 14343 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
echo $ac_n "checking for wchar_t""... $ac_c" 1>&6
-echo "configure:14397: checking for wchar_t" >&5
+echo "configure:14373: checking for wchar_t" >&5
if eval "test \"`echo '$''{'wx_cv_type_wchar_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14403 "configure"
+#line 14379 "configure"
#include "confdefs.h"
#ifdef HAVE_WCHAR_H
; return 0; }
EOF
-if { (eval echo configure:14424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_wchar_t=yes
else
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking if size_t is unsigned int""... $ac_c" 1>&6
-echo "configure:14456: checking if size_t is unsigned int" >&5
+echo "configure:14432: checking if size_t is unsigned int" >&5
if eval "test \"`echo '$''{'wx_cv_size_t_is_uint'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14461 "configure"
+#line 14437 "configure"
#include "confdefs.h"
#include <stddef.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:14474: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14450: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_size_t_is_uint=no
else
else
echo $ac_n "checking if size_t is unsigned long""... $ac_c" 1>&6
-echo "configure:14497: checking if size_t is unsigned long" >&5
+echo "configure:14473: checking if size_t is unsigned long" >&5
if eval "test \"`echo '$''{'wx_cv_size_t_is_ulong'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14502 "configure"
+#line 14478 "configure"
#include "confdefs.h"
#include <stddef.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:14515: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_size_t_is_ulong=no
else
echo $ac_n "checking for pw_gecos in struct passwd""... $ac_c" 1>&6
-echo "configure:14549: checking for pw_gecos in struct passwd" >&5
+echo "configure:14525: checking for pw_gecos in struct passwd" >&5
if eval "test \"`echo '$''{'wx_cv_struct_pw_gecos'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14555 "configure"
+#line 14531 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:14566: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14542: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_pw_gecos=yes
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:14596: checking for working const" >&5
+echo "configure:14572: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14601 "configure"
+#line 14577 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:14650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:14671: checking for inline" >&5
+echo "configure:14647: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 14678 "configure"
+#line 14654 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:14685: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14661: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:14712: checking size of char" >&5
+echo "configure:14688: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_char=1
else
cat > conftest.$ac_ext <<EOF
-#line 14720 "configure"
+#line 14696 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:14731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:14707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_char=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:14751: checking size of short" >&5
+echo "configure:14727: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_short=2
else
cat > conftest.$ac_ext <<EOF
-#line 14759 "configure"
+#line 14735 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:14770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:14746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
EOF
-echo $ac_n "checking size of int *""... $ac_c" 1>&6
-echo "configure:14790: checking size of int *" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_int_p'+set}'`\" = set"; then
+echo $ac_n "checking size of void *""... $ac_c" 1>&6
+echo "configure:14766: checking size of void *" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
- ac_cv_sizeof_int_p=4
+ ac_cv_sizeof_void_p=4
else
cat > conftest.$ac_ext <<EOF
-#line 14798 "configure"
+#line 14774 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
FILE *f=fopen("conftestval", "w");
if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(int *));
+ fprintf(f, "%d\n", sizeof(void *));
exit(0);
}
EOF
-if { (eval echo configure:14809: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:14785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
- ac_cv_sizeof_int_p=`cat conftestval`
+ ac_cv_sizeof_void_p=`cat conftestval`
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
- ac_cv_sizeof_int_p=0
+ ac_cv_sizeof_void_p=0
fi
rm -fr conftest*
fi
fi
-echo "$ac_t""$ac_cv_sizeof_int_p" 1>&6
+echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
cat >> confdefs.h <<EOF
-#define SIZEOF_INT_P $ac_cv_sizeof_int_p
+#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
EOF
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:14829: checking size of int" >&5
+echo "configure:14805: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int=4
else
cat > conftest.$ac_ext <<EOF
-#line 14837 "configure"
+#line 14813 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:14848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:14824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:14868: checking size of long" >&5
+echo "configure:14844: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 14876 "configure"
+#line 14852 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:14887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:14863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
EOF
-echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:14907: checking size of long long" >&5
+
+case "${host}" in
+ arm-*-linux* )
+ echo $ac_n "checking size of long long""... $ac_c" 1>&6
+echo "configure:14886: checking size of long long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_long_long=8
+else
+ cat > conftest.$ac_ext <<EOF
+#line 14894 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(long long));
+ exit(0);
+}
+EOF
+if { (eval echo configure:14905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_long_long=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_long_long=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+EOF
+
+
+ ;;
+ * )
+ echo $ac_n "checking size of long long""... $ac_c" 1>&6
+echo "configure:14927: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=0
else
cat > conftest.$ac_ext <<EOF
-#line 14915 "configure"
+#line 14935 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:14926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:14946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
EOF
+esac
+
echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6
-echo "configure:14947: checking size of wchar_t" >&5
+echo "configure:14969: checking size of wchar_t" >&5
if eval "test \"`echo '$''{'wx_cv_sizeof_wchar_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
else
cat > conftest.$ac_ext <<EOF
-#line 14957 "configure"
+#line 14979 "configure"
#include "confdefs.h"
#ifdef HAVE_WCHAR_H
}
EOF
-if { (eval echo configure:14979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:15001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
wx_cv_sizeof_wchar_t=`cat conftestval`
else
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:15002: checking whether byte ordering is bigendian" >&5
+echo "configure:15024: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 15009 "configure"
+#line 15031 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:15020: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 15024 "configure"
+#line 15046 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:15035: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
ac_cv_c_bigendian=unknown
else
cat > conftest.$ac_ext <<EOF
-#line 15055 "configure"
+#line 15077 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:15068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:15090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:15096: checking how to run the C++ preprocessor" >&5
+echo "configure:15118: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 15109 "configure"
+#line 15131 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:15114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:15136: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:15158: checking for $ac_hdr" >&5
+echo "configure:15180: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15163 "configure"
+#line 15185 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:15168: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:15190: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if C++ compiler supports bool""... $ac_c" 1>&6
-echo "configure:15216: checking if C++ compiler supports bool" >&5
+echo "configure:15238: checking if C++ compiler supports bool" >&5
if eval "test \"`echo '$''{'wx_cv_cpp_bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15231 "configure"
+#line 15253 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:15243: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15265: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_cpp_bool=yes
echo $ac_n "checking for wcslen in -lc""... $ac_c" 1>&6
-echo "configure:15281: checking for wcslen in -lc" >&5
+echo "configure:15303: checking for wcslen in -lc" >&5
ac_lib_var=`echo c'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 15289 "configure"
+#line 15311 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:15300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15322: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for wcslen in -lw""... $ac_c" 1>&6
-echo "configure:15326: checking for wcslen in -lw" >&5
+echo "configure:15348: checking for wcslen in -lw" >&5
ac_lib_var=`echo w'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lw $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 15334 "configure"
+#line 15356 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:15345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15367: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for wcslen in -lmsvcrt""... $ac_c" 1>&6
-echo "configure:15371: checking for wcslen in -lmsvcrt" >&5
+echo "configure:15393: checking for wcslen in -lmsvcrt" >&5
ac_lib_var=`echo msvcrt'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmsvcrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 15379 "configure"
+#line 15401 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:15390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in wcsrtombs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:15426: checking for $ac_func" >&5
+echo "configure:15448: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15431 "configure"
+#line 15453 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:15454: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:15480: checking for vprintf" >&5
+echo "configure:15502: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15485 "configure"
+#line 15507 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:15508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:15532: checking for _doprnt" >&5
+echo "configure:15554: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15537 "configure"
+#line 15559 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:15560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6
-echo "configure:15590: checking for vsnprintf" >&5
+echo "configure:15612: checking for vsnprintf" >&5
if eval "test \"`echo '$''{'wx_cv_func_vsnprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15596 "configure"
+#line 15618 "configure"
#include "confdefs.h"
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:15621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
wx_cv_func_vsnprintf=yes
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 15632 "configure"
+#line 15654 "configure"
#include "confdefs.h"
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:15657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
wx_cv_func_vsnprintf=yes
fi
echo $ac_n "checking for vsscanf""... $ac_c" 1>&6
-echo "configure:15689: checking for vsscanf" >&5
+echo "configure:15711: checking for vsscanf" >&5
if eval "test \"`echo '$''{'wx_cv_func_vsscanf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15695 "configure"
+#line 15717 "configure"
#include "confdefs.h"
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:15718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15740: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_vsscanf=yes
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:15770: checking for iconv" >&5
+echo "configure:15792: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 15778 "configure"
+#line 15800 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:15788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS -liconv"
cat > conftest.$ac_ext <<EOF
-#line 15800 "configure"
+#line 15822 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:15810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking if iconv needs const""... $ac_c" 1>&6
-echo "configure:15831: checking if iconv needs const" >&5
+echo "configure:15853: checking if iconv needs const" >&5
if eval "test \"`echo '$''{'wx_cv_func_iconv_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15836 "configure"
+#line 15858 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:15855: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_iconv_const="no"
else
for ac_func in sigaction
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:15900: checking for $ac_func" >&5
+echo "configure:15922: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15905 "configure"
+#line 15927 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:15928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for sa_handler type""... $ac_c" 1>&6
-echo "configure:15969: checking for sa_handler type" >&5
+echo "configure:15991: checking for sa_handler type" >&5
if eval "test \"`echo '$''{'wx_cv_type_sa_handler'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15975 "configure"
+#line 15997 "configure"
#include "confdefs.h"
#include <signal.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:15987: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16009: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_sa_handler=int
for ac_func in vfork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16024: checking for $ac_func" >&5
+echo "configure:16046: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16029 "configure"
+#line 16051 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16052: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in mkstemp mktemp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16080: checking for $ac_func" >&5
+echo "configure:16102: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16085 "configure"
+#line 16107 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for statfs""... $ac_c" 1>&6
-echo "configure:16134: checking for statfs" >&5
+echo "configure:16156: checking for statfs" >&5
if eval "test \"`echo '$''{'wx_cv_func_statfs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16139 "configure"
+#line 16161 "configure"
#include "confdefs.h"
#if defined(__BSD__)
; return 0; }
EOF
-if { (eval echo configure:16160: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16182: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_statfs=yes
else
echo $ac_n "checking for statvfs""... $ac_c" 1>&6
-echo "configure:16187: checking for statvfs" >&5
+echo "configure:16209: checking for statvfs" >&5
if eval "test \"`echo '$''{'wx_cv_func_statvfs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16192 "configure"
+#line 16214 "configure"
#include "confdefs.h"
#include <sys/statvfs.h>
; return 0; }
EOF
-if { (eval echo configure:16208: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_statvfs=yes
for ac_func in fcntl flock
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16242: checking for $ac_func" >&5
+echo "configure:16264: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16247 "configure"
+#line 16269 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in timegm
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16304: checking for $ac_func" >&5
+echo "configure:16326: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16309 "configure"
+#line 16331 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16332: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in putenv setenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16360: checking for $ac_func" >&5
+echo "configure:16382: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16365 "configure"
+#line 16387 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in nanosleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16435: checking for $ac_func" >&5
+echo "configure:16457: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16440 "configure"
+#line 16462 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16485: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6
-echo "configure:16488: checking for nanosleep in -lposix4" >&5
+echo "configure:16510: checking for nanosleep in -lposix4" >&5
ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16496 "configure"
+#line 16518 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
nanosleep()
; return 0; }
EOF
-if { (eval echo configure:16507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in usleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16535: checking for $ac_func" >&5
+echo "configure:16557: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16540 "configure"
+#line 16562 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in uname gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16606: checking for $ac_func" >&5
+echo "configure:16628: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16611 "configure"
+#line 16633 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16634: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strtok_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16671: checking for $ac_func" >&5
+echo "configure:16693: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16676 "configure"
+#line 16698 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16724: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16739: checking for $ac_func" >&5
+echo "configure:16761: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16744 "configure"
+#line 16766 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
-echo "configure:16792: checking for inet_addr in -lnsl" >&5
+echo "configure:16814: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16800 "configure"
+#line 16822 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:16811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lresolv""... $ac_c" 1>&6
-echo "configure:16830: checking for inet_addr in -lresolv" >&5
+echo "configure:16852: checking for inet_addr in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16838 "configure"
+#line 16860 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:16849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16871: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lsocket""... $ac_c" 1>&6
-echo "configure:16868: checking for inet_addr in -lsocket" >&5
+echo "configure:16890: checking for inet_addr in -lsocket" >&5
ac_lib_var=`echo socket'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16876 "configure"
+#line 16898 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:16887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16909: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in inet_aton
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16923: checking for $ac_func" >&5
+echo "configure:16945: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16928 "configure"
+#line 16950 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_aton in -l$INET_LINK""... $ac_c" 1>&6
-echo "configure:16976: checking for inet_aton in -l$INET_LINK" >&5
+echo "configure:16998: checking for inet_aton in -l$INET_LINK" >&5
ac_lib_var=`echo $INET_LINK'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$INET_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16984 "configure"
+#line 17006 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:16995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for pthread_create in -l$THREADS_LIB""... $ac_c" 1>&6
-echo "configure:17110: checking for pthread_create in -l$THREADS_LIB" >&5
+echo "configure:17132: checking for pthread_create in -l$THREADS_LIB" >&5
ac_lib_var=`echo $THREADS_LIB'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LIB $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17118 "configure"
+#line 17140 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:17129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:17152: checking for pthread_create in -lc_r" >&5
+echo "configure:17174: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17160 "configure"
+#line 17182 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:17171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
ac_safe=`echo "sys/prctl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/prctl.h""... $ac_c" 1>&6
-echo "configure:17195: checking for sys/prctl.h" >&5
+echo "configure:17217: checking for sys/prctl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17200 "configure"
+#line 17222 "configure"
#include "confdefs.h"
#include <sys/prctl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:17205: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:17227: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in thr_setconcurrency
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17245: checking for $ac_func" >&5
+echo "configure:17267: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17250 "configure"
+#line 17272 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17295: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:17303: checking for $ac_hdr" >&5
+echo "configure:17325: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17308 "configure"
+#line 17330 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:17313: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:17335: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for sched_yield in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:17341: checking for sched_yield in -l$THREADS_LINK" >&5
+echo "configure:17363: checking for sched_yield in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17349 "configure"
+#line 17371 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:17360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
-echo "configure:17382: checking for sched_yield in -lposix4" >&5
+echo "configure:17404: checking for sched_yield in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17390 "configure"
+#line 17412 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:17401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
HAVE_PRIOR_FUNCS=0
echo $ac_n "checking for pthread_attr_getschedpolicy in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:17432: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5
+echo "configure:17454: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17440 "configure"
+#line 17462 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_attr_getschedpolicy()
; return 0; }
EOF
-if { (eval echo configure:17451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17473: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for pthread_attr_setschedparam in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:17467: checking for pthread_attr_setschedparam in -l$THREADS_LINK" >&5
+echo "configure:17489: checking for pthread_attr_setschedparam in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_setschedparam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17475 "configure"
+#line 17497 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_attr_setschedparam()
; return 0; }
EOF
-if { (eval echo configure:17486: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for sched_get_priority_max in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:17502: checking for sched_get_priority_max in -l$THREADS_LINK" >&5
+echo "configure:17524: checking for sched_get_priority_max in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17510 "configure"
+#line 17532 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_get_priority_max()
; return 0; }
EOF
-if { (eval echo configure:17521: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_get_priority_max in -lposix4""... $ac_c" 1>&6
-echo "configure:17540: checking for sched_get_priority_max in -lposix4" >&5
+echo "configure:17562: checking for sched_get_priority_max in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17548 "configure"
+#line 17570 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_get_priority_max()
; return 0; }
EOF
-if { (eval echo configure:17559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17581: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for pthread_cancel in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:17606: checking for pthread_cancel in -l$THREADS_LINK" >&5
+echo "configure:17628: checking for pthread_cancel in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_cancel | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17614 "configure"
+#line 17636 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_cancel()
; return 0; }
EOF
-if { (eval echo configure:17625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17647: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for pthread_cleanup_push/pop""... $ac_c" 1>&6
-echo "configure:17651: checking for pthread_cleanup_push/pop" >&5
+echo "configure:17673: checking for pthread_cleanup_push/pop" >&5
if eval "test \"`echo '$''{'wx_cv_func_pthread_cleanup_push'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17657 "configure"
+#line 17679 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:17667: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:17689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_pthread_cleanup_push=yes
fi
echo $ac_n "checking for pthread_mutexattr_t""... $ac_c" 1>&6
-echo "configure:17699: checking for pthread_mutexattr_t" >&5
+echo "configure:17721: checking for pthread_mutexattr_t" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_mutexattr_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17705 "configure"
+#line 17727 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:17715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:17737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_pthread_mutexattr_t=yes
else
echo $ac_n "checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER""... $ac_c" 1>&6
-echo "configure:17742: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
+echo "configure:17764: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_rec_mutex_init'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17748 "configure"
+#line 17770 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:17757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:17779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_pthread_rec_mutex_init=yes
else
if test "$ac_cv_func_strtok_r" = "yes"; then
echo $ac_n "checking if -D_REENTRANT is needed""... $ac_c" 1>&6
-echo "configure:17809: checking if -D_REENTRANT is needed" >&5
+echo "configure:17831: checking if -D_REENTRANT is needed" >&5
if test "$NEEDS_D_REENTRANT_FOR_R_FUNCS" = 1; then
TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D_REENTRANT"
echo "$ac_t""yes" 1>&6
WXWIN_COMPATIBILITY_2_2="yes"
fi
-if test "$WXWIN_COMPATIBILITY_2_2" = "yes"; then
+if test "x$WXWIN_COMPATIBILITY_2_2" != "xno"; then
cat >> confdefs.h <<\EOF
#define WXWIN_COMPATIBILITY_2_2 1
EOF
for ac_func in strptime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18189: checking for $ac_func" >&5
+echo "configure:18211: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18194 "configure"
+#line 18216 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for timezone variable in <time.h>""... $ac_c" 1>&6
-echo "configure:18243: checking for timezone variable in <time.h>" >&5
+echo "configure:18265: checking for timezone variable in <time.h>" >&5
if eval "test \"`echo '$''{'wx_cv_var_timezone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18249 "configure"
+#line 18271 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18261: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18283: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18272 "configure"
+#line 18294 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18284: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18306: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=_timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18295 "configure"
+#line 18317 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18329: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=__timezone
for ac_func in localtime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18348: checking for $ac_func" >&5
+echo "configure:18370: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18353 "configure"
+#line 18375 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_localtime" = "yes"; then
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:18403: checking for tm_gmtoff in struct tm" >&5
+echo "configure:18425: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'wx_cv_struct_tm_has_gmtoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18409 "configure"
+#line 18431 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18443: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_tm_has_gmtoff=yes
for ac_func in gettimeofday ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18450: checking for $ac_func" >&5
+echo "configure:18472: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18455 "configure"
+#line 18477 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_gettimeofday" = "yes"; then
echo $ac_n "checking whether gettimeofday takes two arguments""... $ac_c" 1>&6
-echo "configure:18505: checking whether gettimeofday takes two arguments" >&5
+echo "configure:18527: checking whether gettimeofday takes two arguments" >&5
if eval "test \"`echo '$''{'wx_cv_func_gettimeofday_has_2_args'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18520 "configure"
+#line 18542 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:18533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18555: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=yes
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18541 "configure"
+#line 18563 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:18554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=no
else
if test "$wxUSE_SOCKETS" = "yes"; then
if test "$TOOLKIT" != "MSW"; then
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:18609: checking for socket" >&5
+echo "configure:18631: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18614 "configure"
+#line 18636 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:18637: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:18655: checking for socket in -lsocket" >&5
+echo "configure:18677: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 18663 "configure"
+#line 18685 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:18674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- INET_LINK="$INET_LINK -lsocket"
+ if test "$INET_LINK" != " -lsocket"; then
+ INET_LINK="$INET_LINK -lsocket"
+ fi
else
echo "$ac_t""no" 1>&6
if test "$wxUSE_SOCKETS" = "yes" ; then
if test "$TOOLKIT" != "MSW"; then
echo $ac_n "checking what is the type of the third argument of getsockname""... $ac_c" 1>&6
-echo "configure:18708: checking what is the type of the third argument of getsockname" >&5
+echo "configure:18732: checking what is the type of the third argument of getsockname" >&5
if eval "test \"`echo '$''{'wx_cv_type_getsockname3'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18723 "configure"
+#line 18747 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:18736: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18760: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=socklen_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18744 "configure"
+#line 18768 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:18757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18781: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=size_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18765 "configure"
+#line 18789 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:18778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18802: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=int
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:18850: checking for $ac_hdr" >&5
+echo "configure:18874: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18855 "configure"
+#line 18879 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:18860: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:18884: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18914: checking for $ac_func" >&5
+echo "configure:18938: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18919 "configure"
+#line 18943 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:18970: checking for dlopen in -ldl" >&5
+echo "configure:18994: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 18978 "configure"
+#line 19002 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:18989: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in shl_load
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19018: checking for $ac_func" >&5
+echo "configure:19042: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19023 "configure"
+#line 19047 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19046: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld in -lshl_load""... $ac_c" 1>&6
-echo "configure:19074: checking for dld in -lshl_load" >&5
+echo "configure:19098: checking for dld in -lshl_load" >&5
ac_lib_var=`echo shl_load'_'dld | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lshl_load $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19082 "configure"
+#line 19106 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dld()
; return 0; }
EOF
-if { (eval echo configure:19093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in dlerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19132: checking for $ac_func" >&5
+echo "configure:19156: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19137 "configure"
+#line 19161 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19184: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlerror in -ldl""... $ac_c" 1>&6
-echo "configure:19185: checking for dlerror in -ldl" >&5
+echo "configure:19209: checking for dlerror in -ldl" >&5
ac_lib_var=`echo dl'_'dlerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19193 "configure"
+#line 19217 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlerror()
; return 0; }
EOF
-if { (eval echo configure:19204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
#define wxUSE_UNICODE 1
EOF
+
+ if test "$wxUSE_MSW" != 1; then
+ wxUSE_UNICODE_MSLU=no
+ fi
if test "$wxUSE_MSW" = 1 -a "$wxUSE_UNICODE_MSLU" = "yes"; then
echo $ac_n "checking for main in -lunicows""... $ac_c" 1>&6
-echo "configure:19275: checking for main in -lunicows" >&5
+echo "configure:19303: checking for main in -lunicows" >&5
ac_lib_var=`echo unicows'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lunicows $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19283 "configure"
+#line 19311 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:19290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MSW" = 1; then
if test "$wxUSE_MS_HTML_HELP" = "yes"; then
- ac_safe=`echo "htmlhelp.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for htmlhelp.h""... $ac_c" 1>&6
-echo "configure:19406: checking for htmlhelp.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 19411 "configure"
-#include "confdefs.h"
-#include <htmlhelp.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:19416: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-
- cat >> confdefs.h <<\EOF
+ cat >> confdefs.h <<\EOF
#define wxUSE_MS_HTML_HELP 1
EOF
-
-else
- echo "$ac_t""no" 1>&6
-
- echo "configure: warning: MS HTML Help cannot be used without htmlhelp.h... disabled" 1>&2
- wxUSE_MS_HTML_HELP=no
-
-fi
-
fi
fi
fi
if test "$wxUSE_RESOURCES" = "yes" ; then
- cat >> confdefs.h <<\EOF
+ if test "$wxUSE_NANOX" = "yes"; then
+ echo "configure: warning: Cannot use resource database functions in NanoX" 1>&2
+ else
+ cat >> confdefs.h <<\EOF
#define wxUSE_RESOURCES 1
EOF
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS resource"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS resource"
+ fi
fi
if test "$wxUSE_X_RESOURCES" = "yes"; then
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:19504: checking for $ac_hdr" >&5
+echo "configure:19498: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19509 "configure"
+#line 19503 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:19514: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:19508: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
if test "$wxUSE_CLIPBOARD" = "yes"; then
- if test "$wxUSE_X11" = 1; then
- echo "configure: warning: Clipboard not yet supported under X11... disabled" 1>&2
- wxUSE_CLIPBOARD=no
- fi
-
- if test "$wxUSE_CLIPBOARD" = "yes"; then
- cat >> confdefs.h <<\EOF
+ cat >> confdefs.h <<\EOF
#define wxUSE_CLIPBOARD 1
EOF
- cat >> confdefs.h <<\EOF
+ cat >> confdefs.h <<\EOF
#define wxUSE_DATAOBJ 1
EOF
- fi
fi
if test "$wxUSE_DRAG_AND_DROP" = "yes" ; then
fi
if test "$wxUSE_DIRDLG" = "yes"; then
- if test "$wxUSE_CONSTRAINTS" != "yes"; then
- echo "configure: warning: wxDirDialog requires constraints so it won't be compiled without them" 1>&2
+ if test "$wxUSE_TREECTRL" != "yes"; then
+ echo "configure: warning: wxDirDialog requires wxTreeCtrl so it won't be compiled without it" 1>&2
else
- if test "$wxUSE_TREECTRL" != "yes"; then
- echo "configure: warning: wxDirDialog requires wxTreeCtrl so it won't be compiled without it" 1>&2
- else
- cat >> confdefs.h <<\EOF
+ cat >> confdefs.h <<\EOF
#define wxUSE_DIRDLG 1
EOF
- fi
fi
fi
LIBS="$GUI_TK_LIBRARY $PNG_LINK $JPEG_LINK $TIFF_LINK $LIBS"
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS controls dialogs \
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS artprov controls dialogs \
drawing dynamic erase event exec font image \
minimal richedit rotate widgets"
+
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:20495: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:20479: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
export wx_cv_path_samplesubdirs wx_cv_if_gnu_make \
wx_cv_path_ifs wx_cv_program_ext \
wx_cv_target_library wx_cv_target_library_gl wx_cv_target_libtype
- subdirs="demos samples utils contrib"
+ subdirs="demos samples utils contrib mobile"
fi
s%@LEX@%$LEX%g
s%@LEXLIB@%$LEXLIB%g
s%@LN_S@%$LN_S%g
-s%@GTK_CONFIG_2_0@%$GTK_CONFIG_2_0%g
+s%@PKG_CONFIG@%$PKG_CONFIG%g
s%@GTK_CFLAGS@%$GTK_CFLAGS%g
s%@GTK_LIBS@%$GTK_LIBS%g
s%@GTK_CONFIG@%$GTK_CONFIG%g
s%@RESPROGRAMOBJ@%$RESPROGRAMOBJ%g
s%@WX_RESOURCES_MACOSX@%$WX_RESOURCES_MACOSX%g
s%@WX_RESOURCES_MACOSX_COMPILED@%$WX_RESOURCES_MACOSX_COMPILED%g
+s%@MACOSX_BUNDLE@%$MACOSX_BUNDLE%g
s%@LIBWXMACRES@%$LIBWXMACRES%g
s%@LIBWXMACRESCOMP@%$LIBWXMACRESCOMP%g
s%@LIBWXMACRESWXCONFIG@%$LIBWXMACRESWXCONFIG%g
esac
done
- for ac_config_dir in demos samples utils contrib; do
+ for ac_config_dir in demos samples utils contrib mobile; do
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
projects / wxWidgets.git / blobdiff