#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_
-/*
- * General features
- *
- */
+// ----------------------------------------------------------------------------
+// global settings
+// ----------------------------------------------------------------------------
+
+// define this to 1 if you want icons to behave as bitmaps
+#define wxICON_IS_BITMAP 0
+
+// define this to 0 when building wxBase library
+#define wxUSE_GUI 1
+
+// ----------------------------------------------------------------------------
+// General features
+// ----------------------------------------------------------------------------
+
+#define wxUSE_FILESYSTEM 1 // better have this is you want to compile wxHTML
+
+#if defined(__VISAGECPP__) && (__IBMCPP__ < 400 || __IBMC__ < 400 )
+#define wxUSE_LONGLONG 1
+#endif
+
+#define wxUSE_NET_API 1 // Utilize OS/2's UPM netapi's
+
+#define wxUSE_DATETIME 1 // Utilize the date-time classes
#define wxUSE_CONFIG 1
// Use wxConfig, with CreateConfig in wxApp
-#define WXWIN_COMPATIBILITY 0
- // Compatibility with 1.68 API.
- // Level 0: no backward compatibility, all new features
- // Level 1: Some compatibility. In fact
- // the compatibility code is now very minimal so there
- // is little advantage to setting it to 1.
-
#define wxUSE_POSTSCRIPT 1
// 0 for no PostScript device context
#define wxUSE_AFM_FOR_POSTSCRIPT 1
#define wxUSE_TIMEDATE 1
// 0 for no wxTime/wxDate classes
+#define wxUSE_MENUS 1
+ // 0 for no menus
+
+#define wxUSE_JOYSTICK 1
+ // 0 for no joystick functions
+
#define wxUSE_CLIPBOARD 1
// 0 for no clipboard functions
+#define wxUSE_PLOT 1
+ // 0 for no generic plot functions
+
#define wxUSE_SPLINES 1
// 0 for no splines
#define wxUSE_DRAG_AND_DROP 1
// 0 for no drag and drop
-#define wxUSE_TOOLBAR 1
- // Define 1 to use toolbar classes
+#define wxUSE_CONTROLS 1 // Do not change
+#define wxUSE_POPUPWIN 1 //
+#define wxUSE_TIPWINDOW 1 //
+
+// Recommended setting: 1
+#define wxUSE_BUTTON 1 // wxButton
+#define wxUSE_BMPBUTTON 1 // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
+#define wxUSE_CHECKBOX 1 // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHOICE 1 // wxChoice
+#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_LISTBOX 1 // wxListBox
+#define wxUSE_LISTCTRL 1 // wxListCtrl
+#define wxUSE_RADIOBOX 1 // wxRadioBox
+#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_SCROLLBAR 1 // wxScrollBar
+#define wxUSE_SLIDER 1 // wxSlider
+#define wxUSE_SPINBTN 1 // wxSpinButton
+#define wxUSE_SPINCTRL 1 // wxSpinCtrl
+#define wxUSE_STATBOX 1 // wxStaticBox
+#define wxUSE_STATLINE 1 // wxStaticLine
+#define wxUSE_STATTEXT 1 // wxStaticText
+#define wxUSE_STATBMP 1 // wxStaticBitmap
+#define wxUSE_TEXTCTRL 1 // wxTextCtrl
+#define wxUSE_TOGGLEBTN 1 // requires wxButton
+#define wxUSE_TREECTRL 1 // wxTreeCtrl
+#define wxUSE_CHOICEDLG 1
+#define wxUSE_COLOURDLG 1
+#define wxUSE_DATAOBJ 1
+#define wxUSE_FILEDLG 1
+#define wxUSE_FONTDLG 1
+#define wxUSE_FONTMAP 1
+#define wxUSE_GRID 1
+#define wxUSE_IMAGLIST 1
+#define wxUSE_LOGGUI 1
+#define wxUSE_LOGWINDOW 1
+#define wxUSE_LOG_DIALOG 1
+#define wxUSE_MIMETYPE 1
+#define wxUSE_MSGDLG 1
+#define wxUSE_NOTEBOOK 1
+#define wxUSE_SPLITTER 1
+#define wxUSE_STOPWATCH 1
+#define wxUSE_TAB_DIALOG 1
+#define wxUSE_WXHTML_HELP 1
#define wxUSE_BUTTONBAR 1
// Define 1 to use buttonbar classes (enhanced toolbar
// for MS Windows)
-#define wxUSE_GAUGE 1
- // Define 1 to use Microsoft's gauge (Windows)
- // or Bull's gauge (Motif) library (both in contrib).
-#define wxUSE_COMBOBOX 1
- // Define 1 to use COMBOXBOX control (Windows)
- // or FWW's ComboBox widget (Motif).
-#define wxUSE_CHOICE 1
- // Define 1 to use CHOICE
#define wxUSE_RADIOBUTTON 1
// Define 1 to use radio button control
-#define wxUSE_RADIOBTN 1
- // Unfortunately someone introduced this one, too
#define wxUSE_SCROLLBAR 1
// Define 1 to compile contributed wxScrollBar class
-#define wxUSE_CHECKBOX 1
- // Define 1 to compile checkbox
-
-#define wxUSE_LISTBOX 1
- // Define 1 to compile listbox
-
-#define wxUSE_SPINBTN 1
- // Define 1 to compile spin button
-
-// use wxStaticLine class (separator line in the dialog)?
-#define wxUSE_STATLINE 1
-
-#define wxUSE_CHECKLISTBOX 1
- // Define 1 to compile check listbox
-
-#define wxUSE_CHOICE 1
- // Define 1 to compile choice
-
#define wxUSE_CARET 1
// Define 1 to use wxCaret class
-#define wxUSE_XPM_IN_MSW 1
+#define wxUSE_TREECTRL 1
+ // Define 1 to use wxTree* classes
+#define wxUSE_XPM_IN_OS2 1
// Define 1 to support the XPM package in wxBitmap.
+#define wxUSE_IMAGE_LOADING_IN_OS2 1
+ // Use dynamic DIB loading/saving code in utils/dib under OS2.
+#define wxUSE_RESOURCE_LOADING_IN_OS2 1
+ // Use dynamic icon/cursor loading/saving code
+ // under OS2.
#define wxUSE_WX_RESOURCES 1
// Use .wxr resource mechanism (requires PrologIO library)
// Set to 0 to disable MDI document/view architecture
#define wxUSE_PRINTING_ARCHITECTURE 1
// Set to 0 to disable print/preview architecture code
+#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_OS2 1
+ // Set to 0 to disable PostScript print/preview architecture code
+ // under OS/2 PM (just use PM printing).
#define wxUSE_DYNAMIC_CLASSES 1
// If 1, enables provision of run-time type information.
// NOW MANDATORY: don't change.
// since you may well need to output
// an error log in a production
// version (or non-debugging beta)
+#if defined(__VISAGECPP__) && (__IBMCPP__ < 400 || __IBMC__ < 400 )
+#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
+#else
#define wxUSE_GLOBAL_MEMORY_OPERATORS 1
+#endif
// In debug mode, cause new and delete to be redefined globally.
// If this causes problems (e.g. link errors), set this to 0.
// Set this to 0 if your compiler can't cope
// with omission of prototype parameters.
-#define wxUSE_ODBC 0
- // Define 1 to use ODBC classes
+#define wxUSE_ODBC 1
+ // Define 1 to use ODBC classes
+
+#define wxODBC_FWD_ONLY_CURSORS 1
+ // For backward compatibility reasons, this parameter now only
+ // controls the default scrolling method used by cursors. This
+ // default behavior can be overriden by setting the second param
+ // of wxDB::GetDbConnection() to indicate whether the connection
+ // (and any wxTable()s that use the connection) should support
+ // forward only scrolling of cursors, or both forward and backward
+ // Support for backward scrolling cursors is dependent on the
+ // data source as well as the ODBC driver being used.
+
+#define wxODBC_BACKWARD_COMPATABILITY 0
+ // Default is 0. Set to 1 to use the deprecated classes, enum
+ // types, function, member variables. With a setting of 1, full
+ // backward compatability with the 2.0.x release is possible.
+ // It is STRONGLY recommended that this be set to 0, as
+ // future development will be done only on the non-deprecated
+ // functions/classes/member variables/etc.
#define wxUSE_IOSTREAMH 1
// VC++ 4.2 and above allows <iostream> and <iostream.h>
// Use standard C++ streams if 1. If 0, use wxWin
// streams implementation.
-#define wxUSE_WXCONFIG 1
- // if enabled, compiles built-in OS independent wxConfig
- // class and it's file (any platform) and registry (Win)
- // based implementations
#define wxUSE_THREADS 1
// support for multithreaded applications: if
// 1, compile in thread classes (thread.h)
// and make the library thread safe
#define wxUSE_ZLIB 1
// Use zlib for compression in streams and PNG code
+#define wxUSE_IMAGE 1
+ // Set to 1 for wxImage support (recommended).
#define wxUSE_LIBPNG 1
- // Use PNG bitmap code
+ // Set to 1 for PNG format support
#define wxUSE_LIBJPEG 1
- // Use JPEG bitmap code
+ // Set to 1 for JPEG format support
+#define wxUSE_LIBTIFF 1
+ // Set to 1 for TIFF format support
+#define wxUSE_GIF 1
+ // Set to 1 for GIF format support
+#define wxUSE_PNM 1
+ // Set to 1 for PNM format support
+#define wxUSE_PCX 1
+ // Set to 1 for PCX format support
+#define wxUSE_IFF 1
+ // Set to 1 for IFF format support
+#define wxUSE_XPM 1
+ // Set to 1 for XPM format support
+
+
+#define wxUSE_ICO_CUR 1
+ // Set to 1 for MS Icons and Cursors format support
+
#define wxUSE_SERIAL 1
// Use serialization (requires utils/serialize)
-#define wxUSE_DYNLIB_CLASS 1
- // Compile in wxLibrary class for run-time
- // DLL loading and function calling
#define wxUSE_TOOLTIPS 1
// Define to use wxToolTip class and
// wxWindow::SetToolTip() method
#define wxUSE_ZIPSTREAM 1
// input stream for reading from zip archives
+#define wxUSE_TIMER 1 // use the timer class
/*
* Finer detail
*
// use wxFile class - required by i18n code, wxConfig and others - recommended
#define wxUSE_FILE 1
+#define wxUSE_FFILE 1
+
+// use wxTextBuffer class: required by wxTextFile
+#define wxUSE_TEXTBUFFER 1
+
// use wxTextFile class: requires wxFile, required by wxConfig
#define wxUSE_TEXTFILE 1
// text entry dialog and wxGetTextFromUser function
#define wxUSE_TEXTDLG 1
+// use the number dialog
+#define wxUSE_NUMBERDLG 1
+
// wxToolBar class
#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
// wxStatusBar class
#define wxUSE_STATUSBAR 1
+// wxSpinCtrl class
+#define wxUSE_SPINCTRL 1
+
// progress dialog class for lengthy operations
#define wxUSE_PROGRESSDLG 1
// wxDirDlg class for getting a directory name from user
-#define wxUSE_DIRDLG 1
+#define wxUSE_DIRDLG 1
+#define wxUSE_DIRDLGG 1
#define wxUSE_OWNER_DRAWN 1
// Owner-drawn menus and listboxes
+#define wxUSE_NEW_GRID 1
+ // Define 1 to use the new drid classes
+
/*
* Any platform
*
// complains about deallocating
// arrays of wxPoints if wxPoint is a class.
-#define wxUSE_DRAG_AND_DROP 1
+#define wxUSE_PORTABLE_FONTS_IN_OS2 0
+ // Define 1 to use new portable font scheme in Windows
+ // (used by default under X)
+
+#define wxUSE_GENERIC_DIALOGS_IN_OS2 0
+ // Define 1 to use generic dialogs in Windows, even though
+ // they duplicate native common dialog (e.g. wxColourDialog)
+
+#define wxUSE_SNGLINST_CHECKER 1
+
+#define wxUSE_GEOMETRY 1
+ // needed for wxCanvas
+#define wxUSE_MENUS 1
+
+#define wxUSE_WAVE 1
+
+#define wxUSE_REGEX 1
+
+#define wxUSE_FINDREPLDLG 1 // Find replace dialog
+
+#define wxUSE_PALETTE 1
+
+#define wxUSE_CMDLINE_PARSER 1
+
+#define wxUSE_SPLASH 1
+
+#if (!(defined(WXUSINGDLL) || defined(WXMAKINGDLL)))
+ #define NO_TEXT_WINDOW_STREAM 1 // defined in textctrl.h for DLL builds
+#endif
+
+#define wxUSE_UNICODE 0
+#define wxUSE_UNICODE_MSLU 0
+
+#define wxUSE_DYNLIB_CLASS 1
+ // Compile in wxLibrary class for run-time
+ // DLL loading and function calling
+#define wxUSE_DYNAMIC_LOADER 0
+
+#define wxUSE_WCHAR_T 1
+#define wxUSE_PROTOCOL 1
+#define wxUSE_URL 1
+#define wxUSE_PROTOCOL_HTTP 1
+#define wxUSE_PROTOCOL_FTP 1
+#define wxUSE_PROTOCOL_FILE 1
+
+#define wxUSE_GENERIC_MDI_AS_NATIVE 1
+
+// use wxExpr (a.k.a. PrologIO)
+#define wxUSE_PROLOGIO 1
#endif
// _WX_SETUP_H_
projects / wxWidgets.git / blobdiff