mention that read_write mode doesn't work for standalone buffers

[wxWidgets.git] / configure.in

diff --git a/configure.in b/configure.in
index 51e7fbc9f2250f65246db28c55b80802180f735e..a62edacbcac9fe4ca5587dc9841530e3a76ef62b 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -1,7 +1,7 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_REVISION($Id$)dnl
 
-AC_PREREQ(2.57)
+AC_PREREQ(2.58)
 
 dnl ---------------------------------------------------------------------------
 dnl
@@ -493,6 +493,7 @@ if test $DEBUG_CONFIGURE = 1; then
   DEFAULT_wxUSE_CHECKBOX=no
   DEFAULT_wxUSE_CHECKLST=no
   DEFAULT_wxUSE_CHOICE=no
+  DEFAULT_wxUSE_CHOICEBOOK=no
   DEFAULT_wxUSE_COMBOBOX=no
   DEFAULT_wxUSE_DISPLAY=no
   DEFAULT_wxUSE_GAUGE=no
@@ -677,6 +678,7 @@ else
   DEFAULT_wxUSE_CHECKBOX=yes
   DEFAULT_wxUSE_CHECKLST=yes
   DEFAULT_wxUSE_CHOICE=yes
+  DEFAULT_wxUSE_CHOICEBOOK=yes
   DEFAULT_wxUSE_COMBOBOX=yes
   DEFAULT_wxUSE_DISPLAY=yes
   DEFAULT_wxUSE_GAUGE=yes
@@ -968,6 +970,7 @@ if test "$wxUSE_CONTROLS" = "yes"; then
   DEFAULT_wxUSE_CHECKBOX=yes
   DEFAULT_wxUSE_CHECKLISTBOX=yes
   DEFAULT_wxUSE_CHOICE=yes
+  DEFAULT_wxUSE_CHOICEBOOK=yes
   DEFAULT_wxUSE_GAUGE=yes
   DEFAULT_wxUSE_GRID=yes
   DEFAULT_wxUSE_IMAGLIST=yes
@@ -1006,6 +1009,7 @@ elif test "$wxUSE_CONTROLS" = "no"; then
   DEFAULT_wxUSE_CHECKBOX=no
   DEFAULT_wxUSE_CHECKLISTBOX=no
   DEFAULT_wxUSE_CHOICE=no
+  DEFAULT_wxUSE_CHOICEBOOK=no
   DEFAULT_wxUSE_GAUGE=no
   DEFAULT_wxUSE_GRID=no
   DEFAULT_wxUSE_IMAGLIST=no
@@ -1052,6 +1056,7 @@ WX_ARG_ENABLE(caret,       [  --enable-caret          use wxCaret class], wxUSE_
 WX_ARG_ENABLE(checkbox,    [  --enable-checkbox       use wxCheckBox class], wxUSE_CHECKBOX)
 WX_ARG_ENABLE(checklst,    [  --enable-checklst       use wxCheckListBox (listbox with checkboxes) class], wxUSE_CHECKLST)
 WX_ARG_ENABLE(choice,      [  --enable-choice         use wxChoice class], wxUSE_CHOICE)
+WX_ARG_ENABLE(choicebook,  [  --enable-choicebook     use wxChoicebook class], wxUSE_CHOICEBOOK)
 WX_ARG_ENABLE(combobox,    [  --enable-combobox       use wxComboBox class], wxUSE_COMBOBOX)
 WX_ARG_ENABLE(display,     [  --enable-display        use wxDisplay class], wxUSE_DISPLAY)
 WX_ARG_ENABLE(gauge,       [  --enable-gauge          use wxGauge class], wxUSE_GAUGE)
@@ -1380,16 +1385,6 @@ case ${INSTALL} in
      INSTALL=`pwd`/${INSTALL} ;;
 esac
 
-dnl HP-UX install doesn't handle the "-d" switch so don't use it there
-case ${host} in
-    *-hp-hpux* )
-        INSTALL_DIR="mkdir"
-        ;;
-
-    *)  INSTALL_DIR="$INSTALL -d"
-        ;;
-esac
-
 
 case "${host}" in
 
@@ -4961,6 +4956,10 @@ if test "$wxUSE_SOCKETS" = "yes" ; then
     dnl like mingw does..  -- RL
     if test "$TOOLKIT" != "MSW"; then
         dnl determine the type of third argument for getsockname
+        dnl This test needs to be done in C++ mode since gsocket.cpp now
+        dnl is C++ code and pointer cast that are possible even without
+        dnl warning in C still fail in C++.
+        AC_LANG_PUSH(C++)
         AC_CACHE_CHECK([what is the type of the third argument of getsockname],
                        wx_cv_type_getsockname3,
             [
@@ -5021,6 +5020,7 @@ if test "$wxUSE_SOCKETS" = "yes" ; then
         else
             AC_DEFINE_UNQUOTED(SOCKLEN_T, $wx_cv_type_getsockname3)
         fi
+        AC_LANG_POP
     fi
 fi
 
@@ -5360,6 +5360,11 @@ if test "$wxUSE_CHOICE" = "yes"; then
   USES_CONTROLS=1
 fi
 
+if test "$wxUSE_CHOICEBOOK" = "yes"; then
+    AC_DEFINE(wxUSE_CHOICEBOOK)
+    USES_CONTROLS=1
+fi
+
 if test "$wxUSE_CHECKBOX" = "yes"; then
   AC_DEFINE(wxUSE_CHECKBOX)
   USES_CONTROLS=1
@@ -6081,6 +6086,19 @@ AC_SUBST(HOST_SUFFIX)
 AC_SUBST(CPPUNIT_CFLAGS)
 AC_SUBST(CPPUNIT_LIBS)
 
+case "$TOOLKIT" in
+    GTK)
+        TOOLKIT_USER="GTK+"
+        if test "$WXGTK20" = 1; then
+            TOOLKIT_USER="$TOOLKIT_USER 2"
+        fi
+        ;;
+
+    *)
+        TOOLKIT_USER=$TOOLKIT_LOWERCASE
+        ;;
+esac
+
 AC_BAKEFILE
 
 
@@ -6243,7 +6261,6 @@ AC_SUBST(NM)
 AC_SUBST(LD)
 AC_SUBST(MAKEINFO)
 AC_SUBST(INSTALL_LIBRARY)
-AC_SUBST(INSTALL_DIR)
 
 
 dnl MAKE_SET will be replaced with "MAKE=..." or nothing if make sets MAKE
@@ -6292,23 +6309,33 @@ AC_CONFIG_COMMANDS([default],
               mv -f setup.h lib/wx/include/${TOOLCHAIN_NAME}/wx/setup.h
             fi
             
-            if test -f wx-config; then
+            dnl This test is required to make the following idempotent.
+            dnl Otherwise running config.status or rerunning configure
+            dnl would stomp the wx-config link or try to move it onto
+            dnl itself.
+            dnl Use -h instead of -L to test for link (GD)
+            dnl   -h is documented as obsolete under Mac OS X but works
+            dnl   -L is obsolete under Solaris8
+            if test ! -h wx-config; then
                 chmod +x wx-config
                 mv -f wx-config lib/wx/config/${WXCONFIG_DATA_FILE}
-                ( cd lib/wx/config ; 
-                  rm -f ${TOOLCHAIN_NAME}
-                  ${LN_S} ${WXCONFIG_DATA_FILE} ${TOOLCHAIN_NAME} )
+                ${LN_S} wx-config-${WX_RELEASE} wx-config
             fi
+            ( cd lib/wx/config ; 
+              rm -f ${TOOLCHAIN_NAME}
+              ${LN_S} ${WXCONFIG_DATA_FILE} ${TOOLCHAIN_NAME} )
+
             if test -f wx-config-wrapper; then
                 chmod +x wx-config-wrapper
-                mv -f wx-config-wrapper wx-config
+                mv -f wx-config-wrapper wx-config-${WX_RELEASE}
                 rm -f wx${TOOLCHAIN_NAME}-config
-                ${LN_S} wx-config wx${TOOLCHAIN_NAME}-config
+                ${LN_S} wx-config-${WX_RELEASE} wx${TOOLCHAIN_NAME}-config
             fi
           ],
           [
             TOOLCHAIN_NAME="${TOOLCHAIN_NAME}"
             WXCONFIG_DATA_FILE="${WXCONFIG_DATA_FILE}"
+            WX_RELEASE="${WX_RELEASE}"
             LN_S="${LN_S}"
           ]
          )
@@ -6364,11 +6391,11 @@ done
 
 AC_OUTPUT
 
-dnl report on what we decided to do
+dnl report how we have been configured
 echo
 echo "Configured wxWidgets ${WX_VERSION} for \`${host}'"
 echo ""
-echo "  Which GUI toolkit should wxWidgets use?                 ${TOOLKIT_LOWERCASE:-base only}"
+echo "  Which GUI toolkit should wxWidgets use?                 ${TOOLKIT_USER:-base only}"
 echo "  Should wxWidgets be compiled into single library?       ${wxUSE_MONOLITHIC:-yes}"
 
 echo "  Should wxWidgets be compiled in debug mode?             ${wxUSE_DEBUG:-no}"