\section{Alphabetical functions and macros list}\label{functionsalphabetically}
\helpref{CLASSINFO}{classinfo}\\
-\helpref{copystring}{copystring}\\
\helpref{DECLARE\_ABSTRACT\_CLASS}{declareabstractclass}\\
\helpref{DECLARE\_APP}{declareapp}\\
\helpref{DECLARE\_CLASS}{declareclass}\\
\helpref{wxASSERT}{wxassert}\\
\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}\\
\helpref{wxASSERT\_MSG}{wxassertmsg}\\
+\helpref{wxAtomicDec}{wxatomicdec}\\
+\helpref{wxAtomicInc}{wxatomicinc}\\
+\helpref{wxBase64Decode}{wxbase64decode}\\
+\helpref{wxBase64Encode}{wxbase64encode}\\
\helpref{wxBeginBusyCursor}{wxbeginbusycursor}\\
\helpref{wxBell}{wxbell}\\
\helpref{wxBITMAP}{wxbitmapmacro}\\
\helpref{wxCHECK\_GCC\_VERSION}{wxcheckgccversion}\\
\helpref{wxCHECK\_MSG}{wxcheckmsg}\\
\helpref{wxCHECK\_RET}{wxcheckret}\\
+\helpref{wxCHECK\_SUNCC\_VERSION}{wxchecksunccversion}\\
\helpref{wxCHECK\_VERSION}{wxcheckversion}\\
\helpref{wxCHECK\_VERSION\_FULL}{wxcheckversionfull}\\
\helpref{wxCHECK\_W32API\_VERSION}{wxcheckw32apiversion}\\
\helpref{wxDROP\_ICON}{wxdropicon}\\
\helpref{wxDebugMsg}{wxdebugmsg}\\
\helpref{WXDEBUG\_NEW}{debugnew}\\
+\helpref{wxDEPRECATED}{wxdeprecated}\\
+\helpref{wxDEPRECATED\_BUT\_USED\_INTERNALLY}{wxdeprecatedbutusedinternally}\\
\helpref{wxDirExists}{functionwxdirexists}\\
\helpref{wxDirSelector}{wxdirselector}\\
\helpref{wxDisplayDepth}{wxdisplaydepth}\\
\helpref{wxGetDisplayName}{wxgetdisplayname}\\
\helpref{wxGetDisplaySize}{wxdisplaysize}\\
\helpref{wxGetDisplaySizeMM}{wxdisplaysizemm}\\
-\helpref{wxGetElapsedTime}{wxgetelapsedtime}\\
\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
\helpref{wxGetEnv}{wxgetenv}\\
\helpref{wxGetFileKind}{wxgetfilekind}\\
\helpref{wxGetMousePosition}{wxgetmouseposition}\\
\helpref{wxGetMouseState}{wxgetmousestate}\\
\helpref{wxGetMultipleChoices}{wxgetmultiplechoices}\\
-\helpref{wxGetMultipleChoice}{wxgetmultiplechoice}\\
\helpref{wxGetNumberFromUser}{wxgetnumberfromuser}\\
\helpref{wxGetOSDirectory}{wxgetosdirectory}\\
\helpref{wxGetOsDescription}{wxgetosdescription}\\
\helpref{wxGetPrinterScaling}{wxgetprinterscaling}\\
\helpref{wxGetPrinterTranslation}{wxgetprintertranslation}\\
\helpref{wxGetProcessId}{wxgetprocessid}\\
-\helpref{wxGetResource}{wxgetresource}\\
\helpref{wxGetSingleChoiceData}{wxgetsinglechoicedata}\\
\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex}\\
\helpref{wxGetSingleChoice}{wxgetsinglechoice}\\
\helpref{wxIsPlatformLittleEndian}{wxisplatformlittleendian}\\
\helpref{wxIsPlatform64Bit}{wxisplatform64bit}\\
\helpref{wxIsWild}{wxiswild}\\
+\helpref{wxJoin}{wxjoin}\\
\helpref{wxKill}{wxkill}\\
\helpref{wxLaunchDefaultBrowser}{wxlaunchdefaultbrowser}\\
\helpref{wxLEAVE\_CRIT\_SECT}{wxleavecritsect}\\
\helpref{wxShutdown}{wxshutdown}\\
\helpref{wxSleep}{wxsleep}\\
\helpref{wxSnprintf}{wxsnprintf}\\
+\helpref{wxSplit}{wxsplit}\\
\helpref{wxSplitPath}{wxsplitfunction}\\
-\helpref{wxStartTimer}{wxstarttimer}\\
\helpref{wxStaticCast}{wxstaticcast}\\
\helpref{wxStrcmp}{wxstrcmp}\\
\helpref{wxStricmp}{wxstricmp}\\
\helpref{wxVaCopy}{wxvacopy}\\
\helpref{wxVsnprintf}{wxvsnprintf}\\
\helpref{wxWakeUpIdle}{wxwakeupidle}\\
-\helpref{wxWriteResource}{wxwriteresource}\\
\helpref{wxYield}{wxyield}\\
\helpref{wx\_const\_cast}{wxconstcastraw}\\
\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw}\\
the compiler is not GNU C++ at all, returns $0$.
+\membersection{wxCHECK\_SUNCC\_VERSION}\label{wxchecksunccversion}
+
+\func{bool}{wxCHECK\_SUNCC\_VERSION}{\param{}{major, minor}}
+
+Returns $1$ if the compiler being used to compile the code is Sun CC Pro
+compiler and its version is at least \texttt{major.minor}. Otherwise returns
+$0$.
+
+
\membersection{wxCHECK\_VERSION}\label{wxcheckversion}
\func{bool}{wxCHECK\_VERSION}{\param{}{major, minor, release}}
\membersection{wxCHECK\_W32API\_VERSION}\label{wxcheckw32apiversion}
-\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+\func{bool}{wxCHECK\_W32API\_VERSION}{\param{}{major, minor, release}}
Returns $1$ if the version of w32api headers used is major.minor.release or
greater. Otherwise, and also if we are not compiling with mingw32/cygwin under
Notice that parameters \arg{argc} and \arg{argv} may be modified by this
function.
+An additional overload of wxEntryStart() is provided under MSW only: it is
+meant to be called with the parameters passed to \texttt{WinMain()}.
+
+\func{bool}{wxEntryStart}{\param{HINSTANCE }{hInstance}, \param{HINSTANCE }{hPrevInstance = \NULL}, \param{char *}{pCmdLine = \NULL}, \param{int }{nCmdShow = \texttt{SW\_SHOWNORMAL}}}
+
+(notice that under Windows CE platform, and only there, the type of
+\arg{pCmdLine} is \texttt{wchar\_t *}, otherwise it is \texttt{char *}, even in
+Unicode build).
+
\wxheading{Include files}
<wx/init.h>
kill this process as well as all of its children (except those which have
started their own session).
+The {\tt wxEXEC\_NOEVENTS} flag prevents processing of any events from taking
+place while the child process is running. It should be only used for very
+short-lived processes as otherwise the application windows risk becoming
+unresponsive from the users point of view. As this flag only makes sense with
+{\tt wxEXEC\_SYNC}, {\tt wxEXEC\_BLOCK} equal to the sum of both of these flags
+is provided as a convenience.
+
Finally, you may use the third overloaded version of this function to execute
a process (always synchronously, the contents of \arg{flags} is or'd with
\texttt{wxEXEC\_SYNC}) and capture its output in the array \arg{output}. The
<wx/app.h>
+\membersection{::wxJoin}\label{wxjoin}
+
+\func{wxString}{wxJoin}{\param{const wxArrayString\&}{ arr}, \param{const wxChar}{ sep}, \param{const wxChar}{ escape = '$\backslash$'}}
+
+Concatenate all lines of the given \helpref{wxArrayString}{wxarraystring} object using the separator \arg{sep} and returns
+the result as a \helpref{wxString}{wxstring}.
+
+If the \arg{escape} character is non-\NULL, then it's used as prefix for each occurrence of \arg{sep}
+in the strings contained in \arg{arr} before joining them which is necessary
+in order to be able to recover the original array contents from the string
+later using \helpref{wxSplit}{wxsplit}.
+
+\wxheading{Include files}
+
+<wx/arrstr.h>
+
+
\membersection{::wxKill}\label{wxkill}
\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}, \param{int }{flags = 0}}
Returns time of last modification of given file.
-The return value is $0$ if an error occured (e.g. file not found).
+The function returns \texttt{(time\_t)}$-1$ if an error occurred (e.g. file not
+found).
\membersection{::wxFileNameFromPath}\label{wxfilenamefrompath}
\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
-\func{wxString}{wxFindFirstFile}{\param{const char *}{spec}, \param{int}{ flags = 0}}
+\func{wxString}{wxFindFirstFile}{\param{const wxString\& }{spec}, \param{int}{ flags = 0}}
This function does directory searching; returns the first file
that matches the path {\it spec}, or the empty string. Use \helpref{wxFindNextFile}{wxfindnextfile} to
\wxheading{Portability}
-This function is implemented for Win32,
-Mac OS and generic Unix provided the system has {\tt statfs()} function.
+The generic Unix implementation depends on the system having
+the \texttt{statfs()} or \texttt{statvfs()} function.
This function first appeared in wxWidgets 2.3.2.
\membersection{::wxDirExists}\label{functionwxdirexists}
-\func{bool}{wxDirExists}{\param{const wxChar *}{dirname}}
+\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
Returns true if \arg{dirname} exists and is a directory.
\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = true}}
Copies {\it file1} to {\it file2}, returning true if successful. If
-{\it overwrite} parameter is true (default), the destination file is overwritten
-if it exists, but if {\it overwrite} is false, the functions fails in this
+{\it overwrite} parameter is \true (default), the destination file is overwritten
+if it exists, but if {\it overwrite} is \false, the functions fails in this
case.
+This function supports resources forks under Mac OS.
+
\membersection{::wxGetCwd}\label{wxgetcwd}
The {\it flags} parameter is reserved for future use.
+Please notice that there is also a wxRmDir() function which simply wraps the
+standard POSIX rmdir() function and so return an integer error code instead of
+a boolean value (but otherwise is currently identical to wxRmdir), don't
+confuse these two functions.
+
\membersection{::wxSetWorkingDirectory}\label{wxsetworkingdirectory}
Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
+\membersection{::wxSplit}\label{wxsplit}
+
+\func{wxArrayString}{wxSplit}{\param{const wxString\&}{ str}, \param{const wxChar}{ sep}, \param{const wxChar}{ escape = '\\'}}
+
+Splits the given \helpref{wxString}{wxstring} object using the separator \arg{sep} and returns the
+result as a \helpref{wxArrayString}{wxarraystring}.
+
+If the \arg{escape} character is non-\NULL, then the occurrences of \arg{sep} immediately prefixed
+with \arg{escape} are not considered as separators.
+
+Note that empty tokens will be generated if there are two or more adjacent separators.
+
+\wxheading{See also}
+
+\helpref{wxJoin}{wxjoin}
+
+\wxheading{Include files}
+
+<wx/arrstr.h>
+
+
\membersection{::wxSplitPath}\label{wxsplitfunction}
-\func{void}{wxSplitPath}{\param{const char *}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
+\func{void}{wxSplitPath}{\param{const wxString\&}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
{\bf NB:} This function is obsolete, please use
\helpref{wxFileName::SplitPath}{wxfilenamesplitpath} instead.
\section{String functions}\label{stringfunctions}
-
-\membersection{::copystring}\label{copystring}
-
-\func{char *}{copystring}{\param{const char *}{s}}
-
-Makes a copy of the string {\it s} using the C++ new operator, so it can be
-deleted with the {\it delete} operator.
-
-This function is deprecated, use \helpref{wxString}{wxstring} class instead.
-
-
\membersection{::wxGetTranslation}\label{wxgettranslation}
-\func{const wxChar *}{wxGetTranslation}{\param{const wxChar* }{str},
- \param{const wxChar* }{domain = NULL}}
+\func{const wxString\& }{wxGetTranslation}{\param{const wxString\& }{str},
+ \param{const wxString\& }{domain = wxEmptyString}}
-\func{const wxChar *}{wxGetTranslation}{\param{const wxChar* }{str}, \param{const wxChar* }{strPlural}, \param{size\_t }{n},
- \param{const wxChar* }{domain = NULL}}
+\func{const wxString\& }{wxGetTranslation}{\param{const wxString\& }{str}, \param{const wxString\& }{strPlural}, \param{size\_t }{n},
+ \param{const wxString\& }{domain = wxEmptyString}}
This function returns the translation of string {\it str} in the current
\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
\membersection{\_}\label{underscore}
-\func{const wxChar *}{\_}{\param{const char *}{s}}
+\func{const wxString\&}{\_}{\param{const wxString\&}{s}}
This macro expands into a call to \helpref{wxGetTranslation}{wxgettranslation}
function, so it marks the message for the extraction by {\tt xgettext} just as
\membersection{wxPLURAL}\label{wxplural}
-\func{const wxChar *}{wxPLURAL}{\param{const char *}{sing}, \param{const char *}{plur}, \param{size\_t}{n}}
+\func{const wxString\&}{wxPLURAL}{\param{const wxString\&}{sing}, \param{const wxString\&}{plur}, \param{size\_t}{n}}
This macro is identical to \helpref{\_()}{underscore} but for the plural variant
of \helpref{wxGetTranslation}{wxgettranslation}.
If path is empty, the current directory will be used. If filename is empty,
no default filename will be supplied. The wildcard determines what files
are displayed in the file selector, and file extension supplies a type
-extension for the required filename. Flags may be a combination of wxOPEN,
-wxSAVE, wxOVERWRITE\_PROMPT or wxFILE\_MUST\_EXIST. Note that wxMULTIPLE
+extension for the required filename. Flags may be a combination of wxFD\_OPEN,
+wxFD\_SAVE, wxFD\_OVERWRITE\_PROMPT or wxFD\_FILE\_MUST\_EXIST. Note that wxFD\_MULTIPLE
can only be used with \helpref{wxFileDialog}{wxfiledialog} and not here as this
function only returns a single file name.
<wx/textdlg.h>
-\membersection{::wxGetMultipleChoice}\label{wxgetmultiplechoice}
-
-\func{int}{wxGetMultipleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
- \param{int }{nsel}, \param{int *}{selection},
- \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
-
-Pops up a dialog box containing a message, OK/Cancel buttons and a multiple-selection
-listbox. The user may choose one or more item(s) and press OK or Cancel.
-
-The number of initially selected choices, and array of the selected indices,
-are passed in; this array will contain the user selections on exit, with
-the function returning the number of selections. {\it selection} must be
-as big as the number of choices, in case all are selected.
-
-If Cancel is pressed, -1 is returned.
-
-{\it choices} is an array of {\it n} strings for the listbox.
-
-If {\it centre} is true, the message text (which may include new line characters)
-is centred; if false, the message is left-justified.
-
-\wxheading{Include files}
-
-<wx/choicdlg.h>
-
-
\membersection{::wxGetSingleChoice}\label{wxgetsinglechoice}
\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
\func{int}{wxFinite}{\param{double }{x}}
-Returns a non-zero value if {\it x} is neither infinite or NaN (not a number),
+Returns a non-zero value if {\it x} is neither infinite nor NaN (not a number),
returns 0 otherwise.
\section{Miscellaneous functions}\label{miscellany}
+\membersection{wxBase64Decode}\label{wxbase64decode}
+
+\func{size\_t}{wxBase64Decode}{\param{void *}{dst}, \param{size\_t }{dstLen},
+\param{const char * }{src}, \param{size\_t }{srcLen = wxNO\_LEN},
+\param{wxBase64DecodeMode }{mode = wxBase64DecodeMode\_Strict},
+\param{size\_t }{*posErr = \NULL}}
+
+\func{wxMemoryBuffer}{wxBase64Decode}{\\
+\param{const char * }{src}, \param{size\_t }{srcLen = wxNO\_LEN},\\
+\param{wxBase64DecodeMode }{mode = wxBase64DecodeMode\_Strict},\\
+\param{size\_t }{*posErr = \NULL}}
+
+These function decode a Base64-encoded string. The first version is a raw
+decoding function and decodes the data into the provided buffer \arg{dst} of
+the given size \arg{dstLen}. An error is returned if the buffer is not large
+enough -- that is not at least \helpref{wxBase64DecodedSize(srcLen)}{wxbase64decodedsize}
+bytes. The second version allocates memory internally and returns it as
+\helpref{wxMemoryBuffer}{wxmemorybuffer} and is recommended for normal use.
+
+The first version returns the number of bytes written to the buffer or the
+necessary buffer size if \arg{dst} was \NULL or \texttt{wxCONV\_FAILED} on
+error, e.g. if the output buffer is too small or invalid characters were
+encountered in the input string. The second version returns a buffer with the
+base64 decoded binary equivalent of the input string. In neither case is the
+buffer NUL-terminated.
+
+\wxheading{Parameters}
+
+\docparam{dst}{Pointer to output buffer, may be \NULL to just compute the
+necessary buffer size.}
+
+\docparam{dstLen}{The size of the output buffer, ignored if \arg{dst} is
+\NULL.}
+
+\docparam{src}{The input string, must not be \NULL.}
+
+\docparam{srcLen}{The length of the input string or special value
+\texttt{wxNO\_LEN} if the string is \NUL-terminated and the length should be
+computed by this function itself.}
+
+\docparam{mode}{This parameter specifies the function behaviour when invalid
+characters are encountered in input. By default, any such character stops the
+decoding with error. If the mode is wxBase64DecodeMode\_SkipWS, then the white
+space characters are silently skipped instead. And if it is
+wxBase64DecodeMode\_Relaxed, then all invalid characters are skipped.}
+
+\docparam{posErr}{If this pointer is non-\NULL and an error occurs during
+decoding, it is filled with the index of the invalid character.}
+
+\wxheading{Include files}
+
+<wx/base64.h>
+
+
+\membersection{wxBase64DecodedSize}\label{wxbase64decodedsize}
+
+\func{size\_t}{wxBase64DecodedSize}{\param{size\_t }{srcLen}}
+
+Returns the size of the buffer necessary to contain the data encoded in a
+base64 string of length \arg{srcLen}. This can be useful for allocating a
+buffer to be passed to \helpref{wxBase64Decode}{wxbase64decode}.
+
+
+\membersection{wxBase64Encode}\label{wxbase64encode}
+
+\func{size\_t}{wxBase64Encode}{\param{char *}{dst}, \param{size\_t }{dstLen},
+\param{const void *}{src}, \param{size\_t }{srcLen}}
+
+\func{wxString}{wxBase64Encode}{\param{const void *}{src}, \param{size\_t }{srcLen}}
+
+\func{wxString}{wxBase64Encode}{\param{const wxMemoryBuffer\& }{buf}}
+
+These functions encode the given data using base64. The first of them is the
+raw encoding function writing the output string into provided buffer while the
+other ones return the output as wxString. There is no error return for these
+functions except for the first one which returns \texttt{wxCONV\_FAILED} if the
+output buffer is too small. To allocate the buffer of the correct size, use
+\helpref{wxBase64EncodedSize}{wxbase64encodedsize} or call this function with
+\arg{dst} set to \NULL -- it will then return the necessary buffer size.
+
+\wxheading{Parameters}
+
+\docparam{dst}{The output buffer, may be \NULL to retrieve the needed buffer
+size.}
+
+\docparam{dstLen}{The output buffer size, ignored if \arg{dst} is \NULL.}
+
+\docparam{src}{The input buffer, must not be \NULL.}
+
+\docparam{srcLen}{The length of the input data.}
+
+\wxheading{Include files}
+
+<wx/base64.h>
+
+
+\membersection{wxBase64EncodedSize}\label{wxbase64encodedsize}
+
+\func{size\_t}{wxBase64EncodedSize}{\param{size\_t }{len}}
+
+Returns the length of the string with base64 representation of a buffer of
+specified size \arg{len}. This can be useful for allocating the buffer passed
+to \helpref{wxBase64Encode}{wxbase64encode}.
+
+
\membersection{wxCONCAT}\label{wxconcat}
\func{}{wxCONCAT}{\param{}{x}, \param{}{y}}
+\membersection{wxDEPRECATED}\label{wxdeprecated}
+
+This macro can be used around a function declaration to generate warnings
+indicating that this function is deprecated (i.e. obsolete and planned to be
+removed in the future) when it is used. Only Visual C++ 7 and higher and g++
+compilers currently support this functionality.
+
+Example of use:
+\begin{verbatim}
+ // old function, use wxString version instead
+ wxDEPRECATED( void wxGetSomething(char *buf, size_t len) );
+
+ // ...
+ wxString wxGetSomething();
+\end{verbatim}
+
+
+\membersection{wxDEPRECATED\_BUT\_USED\_INTERNALLY}\label{wxdeprecatedbutusedinternally}
+
+This is a special version of \helpref{wxDEPRECATED}{wxdeprecated} macro which
+only does something when the deprecated function is used from the code outside
+wxWidgets itself but doesn't generate warnings when it is used from wxWidgets.
+It is used with the virtual functions which are called by the library itself --
+even if such function is deprecated the library still has to call it to ensure
+that the existing code overriding it continues to work, but the use of this
+macro ensures that a deprecation warning will be generated if this function is
+used from the user code or, in case of Visual C++, even when it is simply
+overridden.
+
+
\membersection{wxEXPLICIT}\label{wxexplicit}
{\tt wxEXPLICIT} is a macro which expands to the C++ {\tt explicit} keyword if
\func{long}{wxNewId}{\void}
+This function is deprecated as the ids generated by it can conflict with the
+ids defined by the user code, use \texttt{wxID\_ANY} to assign ids which are
+guaranteed to not conflict with the user-defined ids for the controls and menu
+items you create instead of using this function.
+
+
Generates an integer identifier unique to this run of the program.
\wxheading{Include files}
\membersection{wxON\_BLOCK\_EXIT}\label{wxonblockexit}
\func{}{wxON\_BLOCK\_EXIT0}{\param{}{func}}
+
\func{}{wxON\_BLOCK\_EXIT1}{\param{}{func}, \param{}{p1}}
+
\func{}{wxON\_BLOCK\_EXIT2}{\param{}{func}, \param{}{p1}, \param{}{p2}}
This family of macros allows to ensure that the global function \arg{func}
\membersection{wxON\_BLOCK\_EXIT\_OBJ}\label{wxonblockexitobj}
\func{}{wxON\_BLOCK\_EXIT\_OBJ0}{\param{}{obj}, \param{}{method}}
+
\func{}{wxON\_BLOCK\_EXIT\_OBJ1}{\param{}{obj}, \param{}{method}, \param{}{p1}}
+
\func{}{wxON\_BLOCK\_EXIT\_OBJ2}{\param{}{obj}, \param{}{method}, \param{}{p1}, \param{}{p2}}
This family of macros is similar to \helpref{wxON\_BLOCK\_EXIT}{wxonblockexit}
and current pointer position in screen coordinates.
+\membersection{wxFromString}\label{wxfromstring}
+
+\func{bool}{wxFromString}{\param{const wxString\& }{str},
+ \param{wxColourBase* }{col}}
+
+Converts string to the type of the second argument. Returns \true on success.
+See also: \helpref{wxToString}{wxtostring}.
+
+
\membersection{::wxGetActiveWindow}\label{wxgetactivewindow}
\func{wxWindow *}{wxGetActiveWindow}{\void}
\wxheading{Include files}
-<wx/windows.h>
+<wx/window.h>
\membersection{::wxGetBatteryState}\label{wxgetbatterystate}
\end{verbatim}
-\membersection{::wxGetResource}\label{wxgetresource}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{const wxString\& *}{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{float *}{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{long *}{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{int *}{value}, \param{const wxString\& }{file = NULL}}
-
-Gets a resource value from the resource database (for example, WIN.INI, or
-.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
-otherwise the specified file is used.
-
-Under X, if an application class (wxApp::GetClassName) has been defined,
-it is appended to the string /usr/lib/X11/app-defaults/ to try to find
-an applications default file when merging all resource databases.
-
-The reason for passing the result in an argument is that it
-can be convenient to define a default value, which gets overridden
-if the value exists in the resource file. It saves a separate
-test for that resource's existence, and it also allows
-the overloading of the function for different types.
-
-See also \helpref{wxWriteResource}{wxwriteresource}, \helpref{wxConfigBase}{wxconfigbase}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{::wxGetStockLabel}\label{wxgetstocklabel}
Open the \arg{url} in user's default browser. If \arg{flags} parameter contains
\texttt{wxBROWSER\_NEW\_WINDOW} flag, a new window is opened for the URL
-(currently this is only supported under Windows).
+(currently this is only supported under Windows). The \arg{url} may also be a
+local file path (with or without \texttt{file://} prefix), if it doesn't
+correspond to an existing file and the URL has no scheme \texttt{http://} is
+prepended to it by default.
Returns \true if the application was successfully launched.
Notice that there should be no semicolon after this macro.
+\membersection{wxToString}\label{wxtostring}
+
+\func{wxString}{wxToString}{\param{const wxColourBase\& }{col}}
+
+Converts its argument to string.
+See also: \helpref{wxFromString}{wxfromstring}.
+
+
\membersection{wxULL}\label{wxull}
\func{wxLongLong\_t}{wxULL}{\param{}{number}}
\texttt{va\_end}.
-\membersection{::wxWriteResource}\label{wxwriteresource}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{const wxString\& }{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{float }{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{long }{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{int }{value}, \param{const wxString\& }{file = NULL}}
-
-Writes a resource value into the resource database (for example, WIN.INI, or
-.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
-otherwise the specified file is used.
-
-Under X, the resource databases are cached until the internal function
-\rtfsp{\bf wxFlushResources} is called automatically on exit, when
-all updated resource databases are written to their files.
-
-Note that it is considered bad manners to write to the .Xdefaults
-file under Unix, although the WIN.INI file is fair game under Windows.
-
-See also \helpref{wxGetResource}{wxgetresource}, \helpref{wxConfigBase}{wxconfigbase}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{\_\_WXFUNCTION\_\_}\label{wxfunction}
\section{Time functions}\label{timefunctions}
-The functions in this section deal with getting the current time and
-starting/stopping the global timers. Please note that the timer functions are
-deprecated because they work with one global timer only and
-\helpref{wxTimer}{wxtimer} and/or \helpref{wxStopWatch}{wxstopwatch} classes
-should be used instead. For retrieving the current time, you may also use
-\helpref{wxDateTime::Now}{wxdatetimenow} or
-\helpref{wxDateTime::UNow}{wxdatetimeunow} methods.
-
-
-\membersection{::wxGetElapsedTime}\label{wxgetelapsedtime}
-
-\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = true}}
-
-Gets the time in milliseconds since the last \helpref{::wxStartTimer}{wxstarttimer}.
-
-If {\it resetTimer} is true (the default), the timer is reset to zero
-by this call.
-
-See also \helpref{wxTimer}{wxtimer}.
-
-\wxheading{Include files}
-
-<wx/timer.h>
+The functions in this section deal with getting the current time and sleeping
+for the specified time interval.
\membersection{::wxGetLocalTime}\label{wxgetlocaltime}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
\membersection{::wxGetLocalTimeMillis}\label{wxgetlocaltimemillis}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
\membersection{::wxGetUTCTime}\label{wxgetutctime}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
\membersection{::wxMicroSleep}\label{wxmicrosleep}
<wx/utils.h>
-\membersection{::wxStartTimer}\label{wxstarttimer}
-
-\func{void}{wxStartTimer}{\void}
-
-Starts a stopwatch; use \helpref{::wxGetElapsedTime}{wxgetelapsedtime} to get the elapsed time.
-
-See also \helpref{wxTimer}{wxtimer}.
-
-\wxheading{Include files}
-
-<wx/timer.h>
-
-
\membersection{::wxUsleep}\label{wxusleep}
\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
\membersection{wxSetEnv}\label{wxsetenv}
-\func{bool}{wxSetEnv}{\param{const wxString\&}{ var}, \param{const wxChar *}{value}}
+\func{bool}{wxSetEnv}{\param{const wxString\&}{ var}, \param{const wxString\& }{value}}
Sets the value of the environment variable {\it var} (adding it if necessary)
to {\it value}.
Returns \true on success.
+\wxheading{See also}
+
+\helpref{wxUnsetEnv}{wxunsetenv}
+
\membersection{wxUnsetEnv}\label{wxunsetenv}
function.
Returns \true on success.
+
+\wxheading{See also}
+
+\helpref{wxSetEnv}{wxsetenv}
+
+
+\section{Atomic operations}\label{atomicoperations}
+
+When using multi-threaded applications, it is often required to access or
+modify memory which is shared between threads. Atomic integer and pointer
+operations are an efficient way to handle this issue (another, less efficient,
+way is to use a \helpref{mutex}{wxmutex} or \helpref{critical
+section}{wxcriticalsection}). A native implementation exists for Windows,
+Linux, Solaris and Mac OS X, for other OS, a
+\helpref{wxCriticalSection}{wxcriticalsection} is used to protect the data.
+
+One particular application is reference counting (used by so-called smart
+pointers).
+
+You should define your variable with the type wxAtomicInt in order to apply
+atomic operations to it.
+
+\wxheading{Include files}
+
+<wx/atomic.h>
+
+\membersection{::wxAtomicInc}\label{wxatomicinc}
+
+\func{void}{wxAtomicInc}{\param{wxAtomicInt\& }{value}}
+
+This function increments \arg{value} in an atomic manner.
+
+
+\membersection{::wxAtomicDec}\label{wxatomicdec}
+
+\func{wxInt32}{wxAtomicDec}{\param{wxAtomicInt\& }{value}}
+
+This function decrements \arg{value} in an atomic manner.
+
+Returns 0 if \arg{value} is 0 after decrementation or any non-zero value (not
+necessarily equal to the value of the variable) otherwise.
+
+
projects / wxWidgets.git / blobdiff