Added project files for wxUniv under MSW

[wxWidgets.git] / include / wx / mac / setup.h

diff --git a/include/wx/mac/setup.h b/include/wx/mac/setup.h
index bdbcba2aff28fd7680a7e2deeb95781041f80aa1..a3bca25ad47f41583a103a2393a85ba15bb9a6ff 100644 (file)
--- a/include/wx/mac/setup.h
+++ b/include/wx/mac/setup.h
@@ -1,8 +1,8 @@
 /////////////////////////////////////////////////////////////////////////////
 // Name:        setup.h
 // Purpose:     Configuration for the library
 /////////////////////////////////////////////////////////////////////////////
 // Name:        setup.h
 // Purpose:     Configuration for the library

-// Author:      AUTHOR
-// Modified by:
+// Author:      Stefan Csomor
+// Modified by: Stefan Csomor

 // Created:     ??/??/98
 // RCS-ID:      $Id$
 // Copyright:   (c) AUTHOR
 // Created:     ??/??/98
 // RCS-ID:      $Id$
 // Copyright:   (c) AUTHOR


@@ -12,337 +12,1107 @@
 #ifndef _WX_SETUP_H_
 #define _WX_SETUP_H_
 
 #ifndef _WX_SETUP_H_
 #define _WX_SETUP_H_
 

-/*
- * General features
- *
- */
- 
-#define wxUSE_GEOMETRY 1
-#define WORDS_BIGENDIAN 1
+// ----------------------------------------------------------------------------
+// global settings
+// ----------------------------------------------------------------------------

 
 

-#define wxUSE_CONFIG           1
-                                // Use wxConfig, with CreateConfig in wxApp
+// define this to 0 when building wxBase library - this can also be done from
+// makefile/project file overriding the value here
+#ifndef wxUSE_GUI
+    #define wxUSE_GUI            1
+#endif // wxUSE_GUI

 
 

+// ----------------------------------------------------------------------------
+// compatibility settings
+// ----------------------------------------------------------------------------
+
+// This setting determines the compatibility with 1.68 API:
+// Level 0: no backward compatibility, all new features
+// Level 1: some extra methods are defined for compatibility.
+//
+// Default is 0.
+//
+// Recommended setting: 0 (in fact the compatibility code is now very minimal
+// so there is little advantage to setting it to 1.

 #define WXWIN_COMPATIBILITY  0
 #define WXWIN_COMPATIBILITY  0

-                                // Compatibility with 1.66 API.
-                                // Level 0: no backward compatibility, all new features
-                                // Level 1: wxDC, OnSize (etc.) compatibility, but
-                                //          some new features such as event tables
-#define wxUSE_POSTSCRIPT  0
-                               // 0 for no PostScript device context
-#define wxUSE_AFM_FOR_POSTSCRIPT 0
-                                // 1 to use font metric files in GetTextExtent
-#define wxUSE_METAFILE    1
-                                // 0 for no Metafile and metafile device context
-#define wxUSE_IPC         0
-                                // 0 for no interprocess comms
-#define wxUSE_HELP        1
-                                // 0 for no help facility
-#define wxUSE_RESOURCES   1
-                               // 0 for no wxGetResource/wxWriteResource
-#define wxUSE_CONSTRAINTS       1
-                                // Use constraints mechanism
-#define wxUSE_TIMEDATE    1
-                                // 0 for no wxTime/wxDate classes

 
 

-#define wxUSE_CLIPBOARD   1
-                                // 0 for no clipboard functions
+// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
+// but this is very dangerous because you can mistakenly pass an icon instead
+// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
+// because an icon is not a valid bitmap
+//
+// Starting from 2.1.12, you have the choice under this backwards compatible
+// behaviour (your code will still compile, but probably won't behave as
+// expected!) and not deriving wxIcon class from wxBitmap, but providing a
+// conversion ctor wxBitmap(const wxIcon&) instead.
+//
+// Recommended setting: 0
+#define wxICON_IS_BITMAP    0

 
 

-#define wxUSE_SPLINES     1
-                                    // 0 for no splines
+// Define as 1 for font size to be backward compatible to 1.63 and earlier.
+// 1.64 and later define point sizes to be compatible with Windows.
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxFONT_SIZE_COMPATIBILITY    0

 
 

-#define wxUSE_DRAG_AND_DROP 0
-                                // 0 for no drag and drop
-
-#define wxUSE_TOOLBAR       1
-#define wxUSE_TOOLBAR_NATIVE       1
-                                    // Define 1 to use toolbar classes
-#define wxUSE_BUTTONBAR     1
-                                    // Define 1 to use buttonbar classes (enhanced toolbar
-                                    // for MS Windows)
-#define wxUSE_GAUGE         1
-                                    // Define 1 to use Microsoft's gauge (Windows)
-                                    // or Bull's gauge (Motif) library (both in contrib).
-#define wxUSE_COMBOBOX      1
-                                    // Define 1 to use COMBOXBOX control (Windows)
-                                    // or FWW's ComboBox widget (Motif).
-#define wxUSE_CHOICE      1
-                                    // Define 1 to use CHOICE
-
-#define wxUSE_RADIOBUTTON   1
-                                    // Define 1 to use radio button control
-#define wxUSE_RADIOBTN   1
-                                    // Unfortunately someone introduced this one, too
-
-#define wxUSE_SCROLLBAR   1
-                                    // Define 1 to compile contributed wxScrollBar class
-
-#define wxUSE_CHECKBOX 1
-                                    // Define 1 to compile checkbox
-
-#define wxUSE_LISTBOX 1
-                                    // Define 1 to compile listbox
-
-#define wxUSE_SPINBTN 1
-                                    // Define 1 to compile spin button
-
-// use wxStaticLine class (separator line in the dialog)?
-#define wxUSE_STATLINE 1
-
-#define wxUSE_CHECKLISTBOX 1
-                                    // Define 1 to compile check listbox
-
-#define wxUSE_CHOICE 1
-                                    // Define 1 to compile choice
-
-#define wxUSE_CARET       1
-                                    // Define 1 to use wxCaret class
-#define wxUSE_XPM_IN_MSW  1
-                                    // Define 1 to support the XPM package in wxBitmap.
-#define wxUSE_IMAGE_LOADING_IN_MSW        1
-                                  // Use dynamic DIB loading/saving code in utils/dib under MSW.
-#define wxUSE_RESOURCE_LOADING_IN_MSW     1
-                                  // Use dynamic icon/cursor loading/saving code
-                                  // under MSW.
-#define wxUSE_WX_RESOURCES        1
-                                  // Use .wxr resource mechanism (requires PrologIO library)
+// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
+// If migrating between versions, your dialogs may seem to shrink.
+//
+// Default is 1
+//
+// Recommended setting: 0 (the new calculations are more correct!)
+#define wxDIALOG_UNIT_COMPATIBILITY   1

 
 

-// support for startup tips (wxShowTip &c)
-#define wxUSE_STARTUP_TIPS       1
+// ----------------------------------------------------------------------------
+// debugging settings
+// ----------------------------------------------------------------------------

 
 

-// BC++/Win16 can't cope with the amount of data in resource.cpp
-#if defined(__WIN16__) && defined(__BORLANDC__)
-#undef wxUSE_WX_RESOURCES
-#define wxUSE_WX_RESOURCES        0
-#endif
+// Generic comment about debugging settings: they are very useful if you don't
+// use any other memory leak detection tools such as Purify/BoundsChecker, but
+// are probably redundant otherwise. Also, Visual C++ CRT has the same features
+// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// may prefer to use it instead of built in memory debugging code because it is
+// faster and more fool proof.
+//
+// Using VC++ CRT memory debugging is enabled by default in debug mode
+// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
+// and if __NO_VC_CRTDBG__ is not defined.

 
 

-#define wxUSE_DOC_VIEW_ARCHITECTURE 1
-                                  // Set to 0 to disable document/view architecture
-#define wxUSE_MDI_ARCHITECTURE  1
-                                  // Set to 0 to disable MDI document/view architecture
-#define wxUSE_PRINTING_ARCHITECTURE  1
-                                    // Set to 0 to disable print/preview architecture code
-#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
-                                    // Set to 0 to disable PostScript print/preview architecture code
-                                    // under Windows (just use Windows printing).
-#define wxUSE_DYNAMIC_CLASSES     1
-                                  // If 1, enables provision of run-time type information.
-                                  // NOW MANDATORY: don't change.
-#define wxUSE_MEMORY_TRACING      1
-                                  // If 1, enables debugging versions of wxObject::new and
-                                  // wxObject::delete *IF* __WXDEBUG__ is also defined.
-                                  // WARNING: this code may not work with all architectures, especially
-                                  // if alignment is an issue.
+// If 1, enables wxDebugContext, for writing error messages to file, etc. If
+// __WXDEBUG__ is not defined, will still use normal memory operators. It's
+// recommended to set this to 1, since you may well need to output an error log
+// in a production version (or non-debugging beta).
+//
+// Default is 1.
+//
+// Recommended setting: 1 but see comment above

 #ifndef __MWERKS__
 #define wxUSE_DEBUG_CONTEXT       0
 #else
 #define wxUSE_DEBUG_CONTEXT       1
 #endif
 #ifndef __MWERKS__
 #define wxUSE_DEBUG_CONTEXT       0
 #else
 #define wxUSE_DEBUG_CONTEXT       1
 #endif

-                                  // If 1, enables wxDebugContext, for
-                                  // writing error messages to file, etc. 
-                                  // If __WXDEBUG__ is not defined, will still use
-                                  // normal memory operators.
-                                  // It's recommended to set this to 1,
-                                  // since you may well need to output
-                                  // an error log in a production
-                                  // version (or non-debugging beta)
+
+// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
+// __WXDEBUG__ is also defined.
+//
+// WARNING: this code may not work with all architectures, especially if
+// alignment is an issue. This switch is currently ignored for mingw / cygwin
+//
+// Default is 1
+//
+// Recommended setting: 1 but see comment in the beginning of this section
+#define wxUSE_MEMORY_TRACING 1
+
+// In debug mode, cause new and delete to be redefined globally.
+// If this causes problems (e.g. link errors), set this to 0.
+// This switch is currently ignored for mingw / cygwin
+//
+// Default is 1
+//
+// Recommended setting: 1 but see comment in the beginning of this section

 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0

-                                  // In debug mode, cause new and delete to be redefined globally.
-                                  // If this causes problems (e.g. link errors), set this to 0.

 
 

+// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
+// this causes problems (e.g. link errors), set this to 0. You may need to set
+// this to 0 if using templates (at least for VC++). This switch is currently
+// ignored for mingw / cygwin
+//
+// Default is 1
+//
+// Recommended setting: 1 but see comment in the beginning of this section

 #define wxUSE_DEBUG_NEW_ALWAYS 1
 #define wxUSE_DEBUG_NEW_ALWAYS 1

-                                  // In debug mode, causes new to be defined to
-                                  // be WXDEBUG_NEW (see object.h).
-                                  // If this causes problems (e.g. link errors), set this to 0.
-                                  // You may need to set this to 0 if using templates (at least
-                                  // for VC++).

 
 

-#define REMOVE_UNUSED_ARG 1
-                                  // Set this to 0 if your compiler can't cope
-                                  // with omission of prototype parameters.
+// wxHandleFatalExceptions() may be used to catch the program faults at run
+// time and, instead of terminating the program with a usual GPF message box,
+// call the user-defined wxApp::OnFatalException() function. If you set
+// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
+//
+// This setting is for Win32 only and can only be enabled if your compiler
+// supports Win32 structured exception handling (currently only VC++ does)
+//
+// Default is 1
+//
+// Recommended setting: 1 if your compiler supports it.
+#ifdef _MSC_VER
+    #define wxUSE_ON_FATAL_EXCEPTION 1
+#else
+    #define wxUSE_ON_FATAL_EXCEPTION 0
+#endif

 
 

-#define wxUSE_ODBC                   1
-                                    // Define 1 to use ODBC classes
+// ----------------------------------------------------------------------------
+// Unicode support
+// ----------------------------------------------------------------------------

 
 

+// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// defined as wchar_t, wxString will use Unicode internally. If you set this
+// to 1, you must use wxT() macro for all literal strings in the program.
+//
+// Unicode is currently only fully supported under Windows NT/2000 (Windows 9x
+// doesn't support it and the programs compiled in Unicode mode will not run
+// under 9x).
+//
+// Default is 0
+//
+// Recommended setting: 0 (unless you only plan to use Windows NT/2000)
+#define wxUSE_UNICODE 0

 
 

-#define wxODBC_FWD_ONLY_CURSORS   1
-                                  // Some databases/ODBC drivers only allow forward scrolling cursors.
-                                  // Unless you specifically want to use backward scrolling
-                                  // cursors, and you know that all of the databases/ODBC drivers
-                                  // that you will use these odbc classes with allow backward 
-                                  // scrolling cursors, this setting should remain set to 1
-                                  // for maximum database/driver compatibilty
+// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
+// compiling the program in Unicode mode. More precisely, it will be possible
+// to construct wxString from a wide (Unicode) string and convert any wxString
+// to Unicode.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_WCHAR_T 1

 
 

+// ----------------------------------------------------------------------------
+// global features
+// ----------------------------------------------------------------------------

 
 

+// Support for message/error logging. This includes wxLogXXX() functions and
+// wxLog and derived classes. Don't set this to 0 unless you really know what
+// you are doing.
+//
+// Default is 1
+//
+// Recommended setting: 1 (always)
+#define wxUSE_LOG 1

 
 

-#ifndef __MWERKS__
-#define wxUSE_IOSTREAMH     0
-#else
-#define wxUSE_IOSTREAMH     1
-#endif
-                                  // VC++ 4.2 and above allows <iostream> and <iostream.h>
-                                  // but you can't mix them. Set to 1 for <iostream.h>,
-                                  // 0 for <iostream>
+// Recommended setting: 1 (always)
+#define wxUSE_LOGWINDOW 1
+
+// Recommended setting: 1 (always)
+#define wxUSE_LOGGUI 1

 
 

+// Support for multithreaded applications: if 1, compile in thread classes
+// (thread.h) and make the library a bit more thread safe. Although thread
+// support is quite stable by now, you may still consider recompiling the
+// library without it if you have no use for it - this will result in a
+// somewhat smaller and faster operation.
+//
+// This is ignored under Win16, threads are only supported under Win32.
+//
+// Default is 1
+//
+// Recommended setting: 0 unless you do plan to develop MT applications
+#define wxUSE_THREADS 1
+
+// If enabled (1), compiles wxWindows streams classes

 #define wxUSE_STREAMS       1
 #define wxUSE_STREAMS       1

-                                  // If enabled (1), compiles wxWindows streams classes

 
 

+// Use standard C++ streams if 1. If 0, use wxWin streams implementation.

 #ifndef __MWERKS__
 #ifndef __MWERKS__

-#define wxUSE_STD_IOSTREAM     0
+#define wxUSE_STD_IOSTREAM  0

 #else
 #define wxUSE_STD_IOSTREAM  1
 #else
 #define wxUSE_STD_IOSTREAM  1

-                                  // Use standard C++ streams if 1. If 0, use wxWin
-                                  // streams implementation.

 #endif
 
 #endif
 

-#define wxUSE_WXCONFIG      1
-                                  // if enabled, compiles built-in OS independent wxConfig
-                                  // class and it's file (any platform) and registry (Win)
-                                  // based implementations
-#define wxUSE_THREADS       0
-                                  // support for multithreaded applications: if
-                                  // 1, compile in thread classes (thread.h)
-                                  // and make the library thread safe
-#define wxUSE_ZLIB          1
-                                  // Use zlib for compression in streams and PNG code
-#define wxUSE_LIBPNG        1
-                                  // Use PNG bitmap code
-#define wxUSE_LIBJPEG       1
-                                  // Use JPEG bitmap code
-#define wxUSE_LIBTIFF          1                                  
-                                  // Use TIFF bitmap code
-#define wxUSE_GIF                      1
-                                                                       // Use GIF bitmap code
-                                  
+// Use serialization (requires utils/serialize)

 #define wxUSE_SERIAL        0
 #define wxUSE_SERIAL        0

-                                  // Use serialization (requires utils/serialize)
-#define wxUSE_DYNLIB_CLASS  0
-                                  // Compile in wxLibrary class for run-time
-                                  // DLL loading and function calling
-#define wxUSE_TOOLTIPS      1
-                                  // Define to use wxToolTip class and
-                                  // wxWindow::SetToolTip() method
-#define wxUSE_SOCKETS       1 // 0
-                                  // Set to 1 to use socket classes
-#define wxUSE_HTML          1 // 0
-                                  // Set to 1 to use wxHTML sub-library
-#define wxUSE_FILESYSTEM    1 
-                                 
-#define wxUSE_FS_ZIP        1 // 0
-#define wxUSE_FS_INET       1 // 0     // Set to 1 to enable virtual file systems
-
-#define wxUSE_BUSYINFO      1 // 0
-                                  // wxBusyInfo displays window with message
-                                  // when app is busy. Works in same way as
-                                  // wxBusyCursor
-#define wxUSE_ZIPSTREAM     1 // 0
-                                  // input stream for reading from zip archives

 
 

-/*
- * Finer detail
- *
- */
+// ----------------------------------------------------------------------------
+// non GUI features selection
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
+// integer which is implemented in terms of native 64 bit integers if any or
+// uses emulation otherwise.
+//
+// This class is required by wxDateTime and so you should enable it if you want
+// to use wxDateTime. For most modern platforms, it will use the native 64 bit
+// integers in which case (almost) all of its functions are inline and it
+// almost does not take any space, so there should be no reason to switch it
+// off.
+//
+// Recommended setting: 1
+#define wxUSE_LONGLONG      1
+
+// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
+// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
+//
+// Default is 1
+//
+// Recommended setting: 1 (wxFile is highly recommended as it is required by
+// i18n code, wxFileConfig and others)
+#define wxUSE_FILE          1
+#define wxUSE_FFILE         1
+
+// use wxTextFile class: requires wxFile, required by wxFileConfig
+#define wxUSE_TEXTFILE      1
+
+// i18n support: _() macro, wxLocale class. Requires wxTextFile.
+#define wxUSE_INTL          1
+
+// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
+// allow to manipulate dates, times and time intervals. wxDateTime replaces the
+// old wxTime and wxDate classes which are still provided for backwards
+// compatibility (and implemented in terms of wxDateTime).
+//
+// Note that this class is relatively new and is still officially in alpha
+// stage because some features are not yet (fully) implemented. It is already
+// quite useful though and should only be disabled if you are aiming at
+// absolutely minimal version of the library.
+//
+// Requires: wxUSE_LONGLONG
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_DATETIME      1
+
+// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not
+// the same as wxDateTime!). These classes are obsolete and shouldn't be used
+// in new code
+//
+// Default is 0
+//
+// Recommended setting: 0 unless you have legacy code which uses these classes
+#define wxUSE_TIMEDATE 0
+
+// Set wxUSE_TIMER to 1 to compile wxTimer class
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_TIMER         1
+
+// Use wxStopWatch clas.
+//
+// Default is 1
+//
+// Recommended setting: 1 (needed by wxSocket)
+#define wxUSE_STOPWATCH     1

 
 

+// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
+// which allow the application to store its settings in the persistent
+// storage. Setting this to 1 will also enable on-demand creation of the
+// global config object in wxApp.
+//
+// See also wxUSE_CONFIG_NATIVE below.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG        1
+
+// If wxUSE_CONFIG is 1, you may choose to use either the native config
+// classes under Windows (using .INI files under Win16 and the registry under
+// Win32) or the portable text file format used by the config classes under
+// Unix.
+//
+// Default is 1 to use native classes. Note that you may still use
+// wxFileConfig even if you set this to 1 - just the config object created by
+// default for the applications needs will be a wxRegConfig or wxIniConfig and
+// not wxFileConfig.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG_NATIVE   1
+
+// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
+// to connect/disconnect from the network and be notified whenever the dial-up
+// network connection is established/terminated. Requires wxUSE_DYNLIB_CLASS.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DIALUP_MANAGER   1
+
+// Compile in wxLibrary class for run-time DLL loading and function calling.
+// Required by wxUSE_DIALUP_MANAGER.
+//
+// This setting is for Win32 only
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DYNLIB_CLASS  1
+
+// Set to 1 to use socket classes
+#define wxUSE_SOCKETS       1
+
+// Set to 1 to enable virtual file systems (required by wxHTML)
+#define wxUSE_FILESYSTEM    1
+
+// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_ZIP        1
+
+// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_INET       1
+
+// Set to 1 to compile wxZipInput/OutputStream classes.
+#define wxUSE_ZIPSTREAM     1
+
+// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
+// wxUSE_LIBPNG.
+#define wxUSE_ZLIB          1
+
+// If enabled, the code written by Apple will be used to write, in a portable
+// way, float on the disk. See extended.c for the license which is different
+// from wxWindows one.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you don't like the license terms (unlikely)

 #define wxUSE_APPLE_IEEE          1
 #define wxUSE_APPLE_IEEE          1

-                                // if enabled, the float codec written by Apple
-                                // will be used to write, in a portable way,
-                                // float on the disk

 
 

-// use wxFile class - required by i18n code, wxConfig and others - recommended
-#define wxUSE_FILE                1
+// Joystick support class
+#define wxUSE_JOYSTICK            1
+
+// wxFontMapper class
+#define wxUSE_FONTMAP 1
+
+// wxMimeTypesManager class
+#define wxUSE_MIMETYPE 1
+
+// ----------------------------------------------------------------------------
+// Individual GUI controls
+// ----------------------------------------------------------------------------
+
+// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
+// (without it, wxControl class is not compiled)
+//
+// Default is 1
+//
+// Recommended setting: 1 (don't change except for very special programs)
+#define wxUSE_CONTROLS     1

 
 

-// use wxTextFile class: requires wxFile, required by wxConfig
-#define wxUSE_TEXTFILE            1
+// wxPopupWindow class is not used currently by wxMSW
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_POPUPWIN     0

 
 

-// i18n support: _() macro, wxLocale class. Requires wxFile
-#define wxUSE_INTL                1
+// Each of the settings below corresponds to one wxWindows control. They are
+// all switched on by default but may be disabled if you are sure that your
+// program (including any standard dialogs it can show!) doesn't need them and
+// if you desperately want to save some space. If you use any of these you must
+// set wxUSE_CONTROLS as well.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_BUTTON       1    // wxButton
+#define wxUSE_BMPBUTTON    1    // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1    // wxCalendarCtrl
+#define wxUSE_CHECKBOX     1    // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1    // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHOICE       1    // wxChoice
+#define wxUSE_COMBOBOX     1    // wxComboBox
+#define wxUSE_GAUGE        1    // wxGauge
+#define wxUSE_LISTBOX      1    // wxListBox
+#define wxUSE_LISTCTRL     1    // wxListCtrl
+#define wxUSE_RADIOBOX     1    // wxRadioBox
+#define wxUSE_RADIOBTN     1    // wxRadioButton
+#define wxUSE_SCROLLBAR    1    // wxScrollBar
+#define wxUSE_SLIDER       1    // wxSlider
+#define wxUSE_SPINBTN      1    // wxSpinButton
+#define wxUSE_SPINCTRL     1    // wxSpinCtrl
+#define wxUSE_STATBOX      1    // wxStaticBox
+#define wxUSE_STATLINE     1    // wxStaticLine
+#define wxUSE_STATTEXT     1    // wxStaticText
+#define wxUSE_STATBMP      1    // wxStaticBitmap
+#define wxUSE_TEXTCTRL     1    // wxTextCtrl
+#define wxUSE_TOGGLEBTN    0    // requires wxButton
+#define wxUSE_TREECTRL     1    // wxTreeCtrl

 
 

-// wxLogXXX functions - highly recommended
-#define wxUSE_LOG                   1
+// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
+// below either wxStatusBar95 or a generic wxStatusBar will be used.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_STATUSBAR    1

 
 

-// wxValidator class
-#define wxUSE_VALIDATORS 1
+// Two status bar implementations are available under Win32: the generic one
+// or the wrapper around native control. For native look and feel the native
+// version should be used.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (there is no advantage in using the generic one)
+#define wxUSE_NATIVE_STATUSBAR        1
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
+// supports some features which might not be supported by the native wxToolBar
+// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
+// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
+#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
+#define wxUSE_TOOLBAR_SIMPLE 1
+
+// this setting is obsolete, value is ignored
+#define wxUSE_BUTTONBAR    1
+
+// wxNotebook is a control with several "tabs" located on one of its sides. It
+// may be used ot logically organise the data presented to the user instead of
+// putting everything in one huge dialog. It replaces wxTabControl and related
+// classes of wxWin 1.6x.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTEBOOK 1
+
+// wxTabDialog is a generic version of wxNotebook but it is incompatible with
+// the new class. It shouldn't be used in new code.
+//
+// Default is 0.
+//
+// Recommended setting: 0 (use wxNotebook)
+#define wxUSE_TAB_DIALOG    0
+
+// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and
+// the new, much imporved and enhanced version. The new version is backwards
+// compatible with the old one and should be used whenever possible, i.e. if
+// you set wxUSE_GRID to 1, set wxUSE_NEW_GRID to 1 too.
+//
+// Default is 1 for both options.
+//
+// Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using
+// wxGrid and 100% backwards compatibality (with all old wxGrid quirks) is
+// essential.
+//
+// WIN16/BC++ resets wxUSE_NEW_GRID to 0 because it exceeds the data limit.
+#define wxUSE_GRID         1
+#define wxUSE_NEW_GRID     1
+
+// ----------------------------------------------------------------------------
+// Miscellaneous GUI stuff
+// ----------------------------------------------------------------------------

 
 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
 #define wxUSE_ACCEL 1
 
 
 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
 #define wxUSE_ACCEL 1
 

-// wxSashWindow class
-#define wxUSE_SASH 1
+// Use wxCaret: a class implementing a "cursor" in a text control (called caret
+// under Windows).
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can be safely set to 0, not used by the library)
+#define wxUSE_CARET         1

 
 

-// text entry dialog and wxGetTextFromUser function
-#define wxUSE_TEXTDLG 1
+// Miscellaneous geometry code: needed for Canvas library
+#define wxUSE_GEOMETRY            1

 
 

-// wxStatusBar class
-#define wxUSE_STATUSBAR 1
+// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
+// wxListCtrl.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (set it to 0 if you don't use any of the controls
+// enumerated above, then this class is mostly useless too)
+#define wxUSE_IMAGLIST      1

 
 

-// progress dialog class for lengthy operations
-#define wxUSE_PROGRESSDLG 1
+// Use wxMenu, wxMenuBar, wxMenuItem.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can't be disabled under MSW)
+#define wxUSE_MENUS         1
+
+// Use wxSashWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SASH          1
+
+// Use wxSplitterWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SPLITTER      1
+
+// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLTIPS      1
+
+// wxValidator class and related methods
+#define wxUSE_VALIDATORS    1
+
+// ----------------------------------------------------------------------------
+// common dialogs
+// ----------------------------------------------------------------------------
+
+// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
+// file selector, printer dialog). Switching this off also switches off the
+// printing architecture and interactive wxPrinterDC.
+//
+// Default is 1
+//
+// Recommended setting: 1 (unless it really doesn't work)
+#define wxUSE_COMMON_DIALOGS 1
+
+// wxBusyInfo displays window with message when app is busy. Works in same way
+// as wxBusyCursor
+#define wxUSE_BUSYINFO      1
+
+// Use single/multiple choice dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_CHOICEDLG     1

 
 // wxDirDlg class for getting a directory name from user
 #define wxUSE_DIRDLG 1
 
 
 // wxDirDlg class for getting a directory name from user
 #define wxUSE_DIRDLG 1
 

-/*
- * MS Windows/Windows NT
- *
- */
+// TODO: setting to choose the generic or native one
+
+// Use file open/save dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in many places in the library itself)
+#define wxUSE_FILEDLG       1
+
+// Use font picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_FONTDLG       1
+
+// Use wxMessageDialog and wxMessageBox.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_MSGDLG        1
+
+// progress dialog class for lengthy operations
+#define wxUSE_PROGRESSDLG 1
+
+// support for startup tips (wxShowTip &c)
+#define wxUSE_STARTUP_TIPS 1
+
+// text entry dialog and wxGetTextFromUser function
+#define wxUSE_TEXTDLG 1
+
+// number entry dialog
+#define wxUSE_NUMBERDLG 1
+
+// ----------------------------------------------------------------------------
+// Metafiles support
+// ----------------------------------------------------------------------------
+
+// Windows supports the graphics format known as metafile which is, though not
+// portable, is widely used under Windows and so is supported by wxWin (under
+// Windows only, of course). Win16 (Win3.1) used the so-called "Window
+// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
+// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
+// default, WMFs will be used under Win16 and EMFs under Win32. This may be
+// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
+// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
+// in any metafile related classes at all.
+//
+// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
+//
+// Recommended setting: default or 0 for everything for portable programs.
+#define wxUSE_METAFILE              1
+#define wxUSE_ENH_METAFILE          1
+#define wxUSE_WIN_METAFILES_ALWAYS  0
+
+// ----------------------------------------------------------------------------
+// Big GUI components
+// ----------------------------------------------------------------------------
+
+// Set to 0 to disable document/view architecture
+#define wxUSE_DOC_VIEW_ARCHITECTURE 1
+
+// Set to 0 to disable MDI document/view architecture
+#define wxUSE_MDI_ARCHITECTURE    1
+
+// Set to 0 to disable print/preview architecture code
+#define wxUSE_PRINTING_ARCHITECTURE  1
+
+// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
+// much more.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
+// smaller library.
+#define wxUSE_HTML          1
+
+// OpenGL canvas
+#define wxUSE_GLCANVAS       1
+
+// wxTreeLayout class
+#define wxUSE_TREELAYOUT     1
+
+// ----------------------------------------------------------------------------
+// Data transfer
+// ----------------------------------------------------------------------------
+
+// Use wxClipboard class for clipboard copy/paste.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CLIPBOARD     1
+
+// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
+// drop
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DATAOBJ       1
+
+// Use wxDropTarget and wxDropSource classes for drag and drop (this is
+// different from "built in" drag and drop in wxTreeCtrl which is always
+// available). Requires wxUSE_DATAOBJ.
+//
+// Default is 1.
+//
+// Recommended setting: 0 for Mac OS as drag and drop is not yet implemented
+#define wxUSE_DRAG_AND_DROP 0
+
+// ----------------------------------------------------------------------------
+// miscellaneous settings
+// ----------------------------------------------------------------------------
+
+// wxSingleInstanceChecker class allows to verify at startup if another program
+// instance is running (it is only available under Win32)
+//
+// Default is 1
+//
+// Recommended setting: 1 (the class is tiny, disabling it won't save much
+// space)
+#define wxUSE_SNGLINST_CHECKER  1
+
+#define wxUSE_IPC         0
+                                // 0 for no interprocess comms
+#define wxUSE_HELP        1
+                                // 0 for no help facility
+#define wxUSE_MS_HTML_HELP 0
+                                // 0 for no MS HTML Help
+#define wxUSE_RESOURCES   1
+                                // 0 for no wxGetResource/wxWriteResource
+#define wxUSE_CONSTRAINTS 1
+                                // 0 for no window layout constraint system
+
+#define wxUSE_SPLINES     1
+                                // 0 for no splines
+
+#define wxUSE_WX_RESOURCES        1
+                                // Use .wxr resource mechanism (requires PrologIO library)
+
+#define wxUSE_MOUSEWHEEL        1
+                                // Include mouse wheel support

 
 

+// ----------------------------------------------------------------------------
+// postscript support settings
+// ----------------------------------------------------------------------------
+
+// Set to 1 for PostScript device context.
+#define wxUSE_POSTSCRIPT  0
+
+// Set to 1 to use font metric files in GetTextExtent
+#define wxUSE_AFM_FOR_POSTSCRIPT 0
+
+// ----------------------------------------------------------------------------
+// database classes
+// ----------------------------------------------------------------------------
+
+// Define 1 to use ODBC classes
+#define wxUSE_ODBC          0
+
+// For backward compatibility reasons, this parameter now only controls the
+// default scrolling method used by cursors.  This default behavior can be
+// overriden by setting the second param of wxDB::wxDbGetConnection() or
+// wxDb() constructor to indicate whether the connection (and any wxDbTable()s
+// that use the connection) should support forward only scrolling of cursors,
+// or both forward and backward support for backward scrolling cursors is
+// dependent on the data source as well as the ODBC driver being used.
+#define wxODBC_FWD_ONLY_CURSORS         1
+
+// Default is 0.  Set to 1 to use the deprecated classes, enum types, function,
+// member variables.  With a setting of 1, full backward compatability with the
+// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
+// as future development will be done only on the non-deprecated
+// functions/classes/member variables/etc.
+#define wxODBC_BACKWARD_COMPATABILITY 0
+
+// ----------------------------------------------------------------------------
+// other compiler (mis)features
+// ----------------------------------------------------------------------------
+
+// Set this to 0 if your compiler can't cope with omission of prototype
+// parameters.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (should never need to set this to 0)
+#define REMOVE_UNUSED_ARG   1
+
+// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
+// them. Set to 1 for <iostream.h>, 0 for <iostream>
+//
+// Default is 1.
+//
+// Recommended setting: whatever your compiler likes more
+#ifndef __MWERKS__
+#define wxUSE_IOSTREAMH     0
+#else
+#define wxUSE_IOSTREAMH     1
+#endif
+
+// ----------------------------------------------------------------------------
+// image format support
+// ----------------------------------------------------------------------------
+
+// wxImage supports many different image formats which can be configured at
+// compile-time. BMP is always supported, others are optional and can be safely
+// disabled if you don't plan to use images in such format sometimes saving
+// substantial amount of code in the final library.
+//
+// Some formats require an extra library which is included in wxWin sources
+// which is mentioned if it is the case.
+
+// Set to 1 for wxImage support (recommended).
+#define wxUSE_IMAGE         1
+
+// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
+#define wxUSE_LIBPNG        1
+
+// Set to 1 for JPEG format support (requires libjpeg)
+#define wxUSE_LIBJPEG       1
+
+// Set to 1 for TIFF format support (requires libtiff)
+#define wxUSE_LIBTIFF       1
+
+// Set to 1 for GIF format support
+#define wxUSE_GIF           1
+
+// Set to 1 for PNM format support
+#define wxUSE_PNM           1
+
+// Set to 1 for PCX format support
+#define wxUSE_PCX           1
+
+// Set to 1 for XPM format support
+#define wxUSE_XPM           1
+
+// ----------------------------------------------------------------------------
+// Mac-only settings
+// ----------------------------------------------------------------------------
+
+#define WORDS_BIGENDIAN 1
+
+// ----------------------------------------------------------------------------
+// Windows-only settings
+// ----------------------------------------------------------------------------
+
+// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// will override some other settings (see below)
+//
+// Default is 0.
+//
+// Recommended setting: 0 unless you really have to use MFC
+#define wxUSE_MFC           0
+
+// Set this to 1 for generic OLE support: this is required for drag-and-drop,
+// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
+// can't compile/doesn't have the OLE headers.
+//
+// Default is 1.
+//
+// Recommended setting: 1

 #define wxUSE_OLE           1
 #define wxUSE_OLE           1

-                                // drag-and-drop, clipboard, OLE Automation

 
 

+// Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT
+// 3.x. This setting is ignored under Win9x and NT 4.0+.
+//
+// Default is 0 for (most) Win32 (systems), 1 for Win16
+//
+// Recommended setting: same as default

 #if defined(__WIN95__)
 #define wxUSE_CTL3D                      0
 #else
 #define wxUSE_CTL3D                      1
 #if defined(__WIN95__)
 #define wxUSE_CTL3D                      0
 #else
 #define wxUSE_CTL3D                      1

-                                    // Define 1 to use Microsoft CTL3D library.
-                                    // See note above about using FAFA and CTL3D.

 #endif
 
 #endif
 

-#define wxUSE_COMMON_DIALOGS         1
-                                    // On rare occasions (e.g. using DJGPP) may want
-                                    // to omit common dialogs
-                                    // (e.g. file selector, printer dialog).
-                                    // Switching this off also switches off
-                                    // the printing architecture and interactive
-                                    // wxPrinterDC.
+// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
+// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
+// miniframes support instead.
+//
+// Default is 0 for (most) Win32 (systems), 1 for Win16
+//
+// Recommended setting: same as default
+#if defined(__WIN95__)
+#define wxUSE_ITSY_BITSY             0
+#else

 #define wxUSE_ITSY_BITSY             1
 #define wxUSE_ITSY_BITSY             1

-                                    // Define 1 to use Microsoft's ItsyBitsy
-                                    // small title bar library, for wxMiniFrame
+#endif
+
+// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
+// which allows to put more than ~32Kb of text in it even under Win9x (NT
+// doesn't have such limitation).
+//
+// Default is 1 for compilers which support it
+//
+// Recommended setting: 1, only set it to 0 if your compiler doesn't have
+//                      or can't compile <richedit.h>
+#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__)
+#define wxUSE_RICHEDIT  1
+
+// TODO:  This should be ifdef'ed for any compilers that don't support
+//        RichEdit 2.0 but do have RichEdit 1.0...
+#define wxUSE_RICHEDIT2 1
+
+#else
+#define wxUSE_RICHEDIT  0
+#define wxUSE_RICHEDIT2 0
+#endif
+
+// Set this to 1 to enable support for the owner-drawn menu and listboxes. This
+// is required by wxUSE_CHECKLISTBOX.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 for a small library size reduction
+#define wxUSE_OWNER_DRAWN 0
+
+// ----------------------------------------------------------------------------
+// obsolete settings
+// ----------------------------------------------------------------------------
+
+// NB: all settings in this section are obsolete and should not be used/changed
+//     at all, they will disappear
+
+// Set to 1 to use PenWindows
+#define wxUSE_PENWINDOWS             0
+
+// Define 1 to use bitmap messages.

 #define wxUSE_BITMAP_MESSAGE         1
 #define wxUSE_BITMAP_MESSAGE         1

-                                    // Define 1 to use bitmap messages.
-#define wxUSE_PORTABLE_FONTS_IN_MSW  0
-                                    // Define 1 to use new portable font scheme in Windows
-                                    // (used by default under X)
-#define wxFONT_SIZE_COMPATIBILITY    0
-                                    // Define 1 for font size to be backward compatible
-                                    // to 1.63 and earlier. 1.64 and later define point
-                                    // sizes to be compatible with Windows.
-#define wxUSE_GENERIC_DIALOGS_IN_MSW 1
-                                    // Define 1 to use generic dialogs in Windows, even though
-                                    // they duplicate native common dialog (e.g. wxColourDialog)
-#define wxUSE_PENWINDOWS 0
-                                    // Set to 1 to use PenWindows
-
-#define wxUSE_OWNER_DRAWN             0
-                                    // Owner-drawn menus and listboxes

 
 

-#define wxUSE_NATIVE_STATUSBAR        1
-                                    // Set to 0 to use cross-platform wxStatusBar
-#define wxUSE_DBWIN32                 1
-                                    // Use Andrew Tucker's OutputDebugString implementation
-                                    // (required on Win95 only). See utils.cpp.
+// If 1, enables provision of run-time type information.
+// NOW MANDATORY: don't change.
+#define wxUSE_DYNAMIC_CLASSES     1
+
+// ----------------------------------------------------------------------------
+// disable the settings which don't work for some compilers
+// ----------------------------------------------------------------------------
+
+#ifndef wxUSE_NORLANDER_HEADERS
+#if (defined(__MINGW32__) || defined(__CYGWIN__)) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
+#   define wxUSE_NORLANDER_HEADERS 1
+#else
+#   define wxUSE_NORLANDER_HEADERS 0
+#endif
+#endif
+
+#if defined(__GNUWIN32__)
+// These don't work as expected for mingw32 and cygwin32
+#undef  wxUSE_MEMORY_TRACING
+#define wxUSE_MEMORY_TRACING            0
+
+#undef  wxUSE_GLOBAL_MEMORY_OPERATORS
+#define wxUSE_GLOBAL_MEMORY_OPERATORS   0
+
+#undef  wxUSE_DEBUG_NEW_ALWAYS
+#define wxUSE_DEBUG_NEW_ALWAYS          0
+
+// Cygwin betas don't have wcslen
+#if defined(__CYGWIN__) || defined(__CYGWIN32__)
+#  if ! ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
+#    undef wxUSE_WCHAR_T
+#    define wxUSE_WCHAR_T 0
+#  endif
+#endif
+
+#endif // __GNUWIN32__
+
+// MFC duplicates these operators
+#if wxUSE_MFC
+#undef  wxUSE_GLOBAL_MEMORY_OPERATORS
+#define wxUSE_GLOBAL_MEMORY_OPERATORS   0

 
 

+#undef  wxUSE_DEBUG_NEW_ALWAYS
+#define wxUSE_DEBUG_NEW_ALWAYS          0
+#endif // wxUSE_MFC
+
+// ODBC classes aren't Unicode-compatible yet
+#if wxUSE_UNICODE
+#undef wxUSE_ODBC
+#define wxUSE_ODBC 0
+#endif
+
+#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !wxUSE_NORLANDER_HEADERS)
+// Can't use OLE drag and drop in Windows 3.1 because we don't know how
+// to implement UUIDs
+// GnuWin32 doesn't have appropriate headers for e.g. IUnknown.
+#undef wxUSE_DRAG_AND_DROP
+#define wxUSE_DRAG_AND_DROP 0
+#endif
+
+// Only WIN32 supports wxStatusBar95
+#if !defined(__WIN32__) && wxUSE_NATIVE_STATUSBAR
+#undef  wxUSE_NATIVE_STATUSBAR
+#define wxUSE_NATIVE_STATUSBAR 0
+#endif
+
+#if !wxUSE_OWNER_DRAWN
+#undef wxUSE_CHECKLISTBOX
+#define wxUSE_CHECKLISTBOX 0
+#endif
+
+// Salford C++ doesn't like some of the memory operator definitions
+#ifdef __SALFORDC__
+#undef  wxUSE_MEMORY_TRACING
+#define wxUSE_MEMORY_TRACING      0
+
+#undef wxUSE_GLOBAL_MEMORY_OPERATORS
+#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
+
+#undef wxUSE_DEBUG_NEW_ALWAYS
+#define wxUSE_DEBUG_NEW_ALWAYS 0
+
+#undef wxUSE_THREADS
+#define wxUSE_THREADS 0
+
+#undef wxUSE_OWNER_DRAWN
+#define wxUSE_OWNER_DRAWN 0
+#endif // __SALFORDC__
+
+#ifdef __TWIN32__
+
+#undef wxUSE_THREADS
+#define wxUSE_THREADS 0
+
+#undef wxUSE_ODBC
+#define wxUSE_ODBC 0
+
+#endif // __TWIN32__
+
+// BC++/Win16 can't cope with the amount of data in resource.cpp
+#if defined(__WIN16__) && defined(__BORLANDC__)
+#undef wxUSE_WX_RESOURCES
+#define wxUSE_WX_RESOURCES        0
+
+#undef wxUSE_ODBC
+#define wxUSE_ODBC                0
+
+#undef wxUSE_NEW_GRID
+#define wxUSE_NEW_GRID            0
+#endif
+
+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
+// BC++ 4.0 can't compile JPEG library
+#undef wxUSE_LIBJPEG
+#define wxUSE_LIBJPEG 0
+#endif
+
+// wxUSE_DEBUG_NEW_ALWAYS = 1 not compatible with BC++ in DLL mode
+#if defined(__BORLANDC__) && (defined(WXMAKINGDLL) || defined(WXUSINGDLL))
+#undef wxUSE_DEBUG_NEW_ALWAYS
+#define wxUSE_DEBUG_NEW_ALWAYS 0
+#endif
+
+#if defined(__WXMSW__) && defined(__WATCOMC__)

 /*
 /*

- * Any platform
- *
- */
+#undef  wxUSE_GLCANVAS
+#define wxUSE_GLCANVAS 0
+*/
+
+#undef wxUSE_WCHAR_T
+#define wxUSE_WCHAR_T 0
+#endif
+
+#if defined(__WXMSW__) && !defined(__WIN32__)
+
+#undef wxUSE_SOCKETS
+#define wxUSE_SOCKETS 0
+
+#undef wxUSE_THREADS
+#define wxUSE_THREADS 0
+
+#undef wxUSE_TOOLTIPS
+#define wxUSE_TOOLTIPS 0
+
+#undef wxUSE_SPINCTRL
+#define wxUSE_SPINCTRL 0
+
+#undef wxUSE_SPINBTN
+#define wxUSE_SPINBTN 0
+
+#undef wxUSE_LIBPNG
+#define wxUSE_LIBPNG 0
+
+#undef wxUSE_LIBJPEG
+#define wxUSE_LIBJPEG 0
+
+#undef wxUSE_LIBTIFF
+#define wxUSE_LIBTIFF 0
+
+#undef wxUSE_GIF
+#define wxUSE_GIF 0
+
+#undef wxUSE_PNM
+#define wxUSE_PNM 0
+
+#undef wxUSE_PCX
+#define wxUSE_PCX 0
+
+#undef wxUSE_GLCANVAS
+#define wxUSE_GLCANVAS 0

 
 

-#define wxUSE_TYPEDEFS               1
-                                    // Use typedefs not classes for wxPoint
-                                    // and others, to reduce overhead and avoid
-                                    // MS C7 memory bug. Bounds checker
-                                    // complains about deallocating
-                                    // arrays of wxPoints if wxPoint is a class.
+#undef wxUSE_MS_HTML_HELP
+#define wxUSE_MS_HTML_HELP 0
+
+#undef wxUSE_WCHAR_T
+#define wxUSE_WCHAR_T 0
+
+#endif // Win16
+
+// ----------------------------------------------------------------------------
+// undef the things which don't make sense for wxBase build
+// ----------------------------------------------------------------------------
+
+#if !wxUSE_GUI
+
+#undef wxUSE_HTML
+#define wxUSE_HTML 0
+
+#endif // !wxUSE_GUI
+
+// ----------------------------------------------------------------------------
+// check the settings consistency: do it here to abort compilation immediately
+// and not almost in the very end when the relevant file fails to compile and
+// you need to modify setup.h and rebuild everything
+// ----------------------------------------------------------------------------
+
+#if wxUSE_DATETIME && !wxUSE_LONGLONG
+    #error wxDateTime requires wxLongLong
+#endif
+
+#if wxUSE_TEXTFILE && !wxUSE_FILE
+    #error You cannot compile wxTextFile without wxFile
+#endif
+
+#if wxUSE_FILESYSTEM && !wxUSE_STREAMS
+    #error You cannot compile virtual file systems without wxUSE_STREAMS
+#endif
+
+#if wxUSE_HTML && !wxUSE_FILESYSTEM
+    #error You cannot compile wxHTML without virtual file systems
+#endif

 
 

+// add more tests here...

 
 #endif
     // _WX_SETUP_H_
 
 #endif
     // _WX_SETUP_H_