return true;
}
-bool wxFTP::Connect(const wxString& host)
+bool wxFTP::Connect(const wxString& host, unsigned short port)
{
wxIPV4address addr;
addr.Hostname(host);
- addr.Service(wxT("ftp"));
+
+ if ( port )
+ addr.Service(port);
+ else if (!addr.Service(wxT("ftp")))
+ addr.Service(21);
return Connect(addr);
}
if ( !CheckCommand(wxT("QUIT"), '2') )
{
m_lastError = wxPROTO_CONNERR;
- wxLogDebug(_T("Failed to close connection gracefully."));
+ wxLogDebug(wxT("Failed to close connection gracefully."));
}
}
return 0;
}
-#ifdef __WXDEBUG__
// don't show the passwords in the logs (even in debug ones)
wxString cmd, password;
- if ( command.Upper().StartsWith(_T("PASS "), &password) )
+ if ( command.Upper().StartsWith(wxT("PASS "), &password) )
{
- cmd << _T("PASS ") << wxString(_T('*'), password.length());
+ cmd << wxT("PASS ") << wxString(wxT('*'), password.length());
}
else
{
}
LogRequest(cmd);
-#endif // __WXDEBUG__
m_lastError = wxPROTO_NOERR;
return GetResult();
if ( !m_lastResult.empty() )
{
// separate from last line
- m_lastResult += _T('\n');
+ m_lastResult += wxT('\n');
}
m_lastResult += line;
switch ( chMarker )
{
- case _T(' '):
+ case wxT(' '):
endOfReply = true;
break;
- case _T('-'):
+ case wxT('-'):
firstLine = false;
break;
{
if ( line.compare(0, LEN_CODE, code) == 0 )
{
- if ( chMarker == _T(' ') )
+ if ( chMarker == wxT(' ') )
{
endOfReply = true;
}
if ( badReply )
{
- wxLogDebug(_T("Broken FTP server: '%s' is not a valid reply."),
+ wxLogDebug(wxT("Broken FTP server: '%s' is not a valid reply."),
m_lastResult.c_str());
m_lastError = wxPROTO_PROTERR;
switch ( transferMode )
{
default:
- wxFAIL_MSG(_T("unknown FTP transfer mode"));
+ wxFAIL_MSG(wxT("unknown FTP transfer mode"));
// fall through
case BINARY:
- mode = _T('I');
+ mode = wxT('I');
break;
case ASCII:
- mode = _T('A');
+ mode = wxT('A');
break;
}
- if ( !DoSimpleCommand(_T("TYPE"), mode) )
+ if ( !DoSimpleCommand(wxT("TYPE"), mode) )
{
wxLogError(_("Failed to set FTP transfer mode to %s."),
(transferMode == ASCII ? _("ASCII") : _("binary")));
wxString fullcmd = command;
if ( !arg.empty() )
{
- fullcmd << _T(' ') << arg;
+ fullcmd << wxT(' ') << arg;
}
if ( !CheckCommand(fullcmd, '2') )
{
- wxLogDebug(_T("FTP command '%s' failed."), fullcmd.c_str());
+ wxLogDebug(wxT("FTP command '%s' failed."), fullcmd.c_str());
m_lastError = wxPROTO_NETERR;
return false;
// tree conventions, but they always understand CDUP - should we use it if
// dir == ".."? OTOH, do such servers (still) exist?
- return DoSimpleCommand(_T("CWD"), dir);
+ return DoSimpleCommand(wxT("CWD"), dir);
}
bool wxFTP::MkDir(const wxString& dir)
{
- return DoSimpleCommand(_T("MKD"), dir);
+ return DoSimpleCommand(wxT("MKD"), dir);
}
bool wxFTP::RmDir(const wxString& dir)
{
- return DoSimpleCommand(_T("RMD"), dir);
+ return DoSimpleCommand(wxT("RMD"), dir);
}
wxString wxFTP::Pwd()
{
// the result is at least that long if CheckCommand() succeeded
wxString::const_iterator p = m_lastResult.begin() + LEN_CODE + 1;
- if ( *p != _T('"') )
+ if ( *p != wxT('"') )
{
- wxLogDebug(_T("Missing starting quote in reply for PWD: %s"),
+ wxLogDebug(wxT("Missing starting quote in reply for PWD: %s"),
wxString(p, m_lastResult.end()));
}
else
{
for ( ++p; (bool)*p; ++p ) // FIXME-DMARS
{
- if ( *p == _T('"') )
+ if ( *p == wxT('"') )
{
// check if the quote is doubled
++p;
- if ( !*p || *p != _T('"') )
+ if ( !*p || *p != wxT('"') )
{
// no, this is the end
break;
if ( !*p )
{
- wxLogDebug(_T("Missing ending quote in reply for PWD: %s"),
+ wxLogDebug(wxT("Missing ending quote in reply for PWD: %s"),
m_lastResult.c_str() + LEN_CODE + 1);
}
}
else
{
m_lastError = wxPROTO_PROTERR;
- wxLogDebug(_T("FTP PWD command failed."));
+ wxLogDebug(wxT("FTP PWD command failed."));
}
return path;
int portNew = addrNew.Service();
// We need to break the PORT number in bytes
- addrIP.Replace(_T("."), _T(","));
- addrIP << _T(',')
- << wxString::Format(_T("%d"), portNew >> 8) << _T(',')
- << wxString::Format(_T("%d"), portNew & 0xff);
+ addrIP.Replace(wxT("."), wxT(","));
+ addrIP << wxT(',')
+ << wxString::Format(wxT("%d"), portNew >> 8) << wxT(',')
+ << wxString::Format(wxT("%d"), portNew & 0xff);
// Now we have a value like "10,0,0,1,5,23"
return addrIP;
// addresses because the addrNew has an IP of "0.0.0.0", so we need the
// value in addrLocal
wxString port = GetPortCmdArgument(addrLocal, addrNew);
- if ( !DoSimpleCommand(_T("PORT"), port) )
+ if ( !DoSimpleCommand(wxT("PORT"), port) )
{
m_lastError = wxPROTO_PROTERR;
delete sockSrv;
wxSocketBase *wxFTP::GetPassivePort()
{
- if ( !DoSimpleCommand(_T("PASV")) )
+ if ( !DoSimpleCommand(wxT("PASV")) )
{
m_lastError = wxPROTO_PROTERR;
wxLogError(_("The FTP server doesn't support passive mode."));
return NULL;
}
- size_t addrStart = m_lastResult.find(_T('('));
+ size_t addrStart = m_lastResult.find(wxT('('));
size_t addrEnd = (addrStart == wxString::npos)
? wxString::npos
- : m_lastResult.find(_T(')'), addrStart);
+ : m_lastResult.find(wxT(')'), addrStart);
if ( addrEnd == wxString::npos )
{
// - Unix : result like "ls" command
// - Windows : like "dir" command
// - others : ?
- wxString line(details ? _T("LIST") : _T("NLST"));
+ wxString line(details ? wxT("LIST") : wxT("NLST"));
if ( !wildcard.empty() )
{
- line << _T(' ') << wildcard;
+ line << wxT(' ') << wildcard;
}
if ( !CheckCommand(line, '1') )
{
m_lastError = wxPROTO_PROTERR;
- wxLogDebug(_T("FTP 'LIST' command returned unexpected result from server"));
+ wxLogDebug(wxT("FTP 'LIST' command returned unexpected result from server"));
delete sock;
return false;
}
// will we need to hold this file?
TransferMode oldTransfermode = m_currentTransfermode;
SetTransferMode(BINARY);
- command << _T("SIZE ") << fileName;
+ command << wxT("SIZE ") << fileName;
bool ok = CheckCommand(command, '2');
// 213 is File Status (STD9)
// "SIZE" is not described anywhere..? It works on most servers
int statuscode;
- if ( wxSscanf(GetLastResult().c_str(), _T("%i %i"),
+ if ( wxSscanf(GetLastResult().c_str(), wxT("%i %i"),
&statuscode, &filesize) == 2 )
{
// We've gotten a good reply.
// substring containing the name we are looking for. We
// stop the iteration at the first occurrence of the
// filename. The search is not case-sensitive.
- bool foundIt = false;
-
+ const size_t numFiles = fileList.size();
size_t i;
- for ( i = 0; !foundIt && i < fileList.GetCount(); i++ )
+ for ( i = 0; i < fileList.GetCount(); i++ )
{
- foundIt = fileList[i].Upper().Contains(fileName.Upper());
+ if ( fileList[i].Upper().Contains(fileName.Upper()) )
+ break;
}
- if ( foundIt )
+ if ( i != numFiles )
{
// The index i points to the first occurrence of
// fileName in the array Now we have to find out what
// check if the first character is '-'. This would
// indicate Unix-style (this also limits this function
// to searching for files, not directories)
- if ( fileList[i].Mid(0, 1) == _T("-") )
+ if ( fileList[i].Mid(0, 1) == wxT("-") )
{
if ( wxSscanf(fileList[i].c_str(),
- _T("%*s %*s %*s %*s %i %*s %*s %*s %*s"),
+ wxT("%*s %*s %*s %*s %i %*s %*s %*s %*s"),
&filesize) != 9 )
{
// Hmm... Invalid response
else // Windows-style response (?)
{
if ( wxSscanf(fileList[i].c_str(),
- _T("%*s %*s %i %*s"),
+ wxT("%*s %*s %i %*s"),
&filesize) != 4 )
{
// something bad happened..?
projects / wxWidgets.git / blobdiff