wxLayoutLine::wxLayoutLine(wxLayoutLine *prev, wxLayoutList *llist)
{
- m_LineNumber = 0;
m_Width = m_Height = 0;
m_Length = 0;
+
m_updateLeft = -1;
MarkDirty(0);
+
m_Previous = prev;
m_Next = NULL;
+
+ m_LineNumber = 0;
RecalculatePosition(llist);
+
if(m_Previous)
{
- m_LineNumber = m_Previous->GetLineNumber()+1;
+ m_LineNumber = m_Previous->GetLineNumber() + 1;
m_Next = m_Previous->GetNextLine();
m_Previous->m_Next = this;
}
+
if(m_Next)
{
m_Next->m_Previous = this;
}
m_StyleInfo = llist->GetDefaultStyleInfo();
+
+ llist->IncNumLines();
}
wxLayoutLine::~wxLayoutLine()
}
wxLayoutObjectList::iterator
-wxLayoutLine::FindObjectScreen(wxDC &dc,
+wxLayoutLine::FindObjectScreen(wxDC &dc, wxLayoutList *llist,
CoordType xpos, CoordType *cxpos,
bool *found) const
{
wxASSERT(cxpos);
- wxASSERT(cxpos);
+
+ llist->ApplyStyle(GetStyleInfo(), dc);
+
wxLayoutObjectList::iterator i;
CoordType x = 0, cx = 0, width;
for(i = m_ObjectList.begin(); i != NULLIT; i++)
{
- width = (**i).GetWidth();
+ wxLayoutObject *obj = *i;
+ if ( obj->GetType() == WXLO_TYPE_CMD )
+ {
+ // this will set the correct font for the objects which follow
+ obj->Layout(dc, llist);
+ }
+
+ width = obj->GetWidth();
if( x <= xpos && xpos <= x + width )
{
- *cxpos = cx + (**i).GetOffsetScreen(dc, xpos-x);
- if(found) *found = true;
+ *cxpos = cx + obj->GetOffsetScreen(dc, xpos-x);
+
+ if ( found )
+ *found = true;
return i;
}
- x += (**i).GetWidth();
- cx += (**i).GetLength();
+
+ x += obj->GetWidth();
+ cx += obj->GetLength();
}
+
// behind last object:
*cxpos = cx;
- if(found) *found = false;
+
+ if (found)
+ *found = false;
return m_ObjectList.tail();
}
wxLayoutLine *
wxLayoutLine::DeleteLine(bool update, wxLayoutList *llist)
{
- if(m_Next) m_Next->m_Previous = m_Previous;
- if(m_Previous) m_Previous->m_Next = m_Next;
+ // maintain linked list integrity
+ if(m_Next)
+ m_Next->m_Previous = m_Previous;
+ if(m_Previous)
+ m_Previous->m_Next = m_Next;
+
+ wxLayoutLine *next = m_Next;
+ if ( next )
+ {
+ // get the line numbers right again
+ next->MoveLines(-1);
+ }
+
if(update)
{
- m_Next->MoveLines(-1);
- m_Next->RecalculatePositions(1, llist);
+ if ( next )
+ next->RecalculatePositions(1, llist);
+
/* We assume that if we have more than one object in the list,
this means that we have a command object, so we need to
update the following lines. */
)
MarkNextDirty(-1);
}
- wxLayoutLine *next = m_Next;
+
delete this;
+
+ llist->DecNumLines();
+
return next;
}
#endif // 0
}
+ llist->DecNumLines();
+
delete oldnext;
}
m_caret = NULL;
#endif // WXLAYOUT_USE_CARET
+ m_numLines = 0;
m_FirstLine = NULL;
InvalidateUpdateRect();
Clear();
wxLayoutList::~wxLayoutList()
{
InternalClear();
+ Empty();
m_FirstLine->DeleteLine(false, this);
+
+ wxASSERT_MSG( m_numLines == 0, "line count calculation broken" );
}
void
void
wxLayoutList::InternalClear(void)
{
- Empty();
m_Selection.m_selecting = false;
m_Selection.m_valid = false;
m_DefaultStyleInfo = wxLayoutStyleInfo(family, size, style, weight,
underline, fg, bg);
m_CurrentStyleInfo = m_DefaultStyleInfo;
+
+ // Empty() should be called after we set m_DefaultStyleInfo because
+ // otherwise the style info for the first line (created in Empty()) would be
+ // incorrect
+ Empty();
}
wxPoint
CoordType moveDistance = 0;
CoordType offset;
- for ( wxLOiterator i = m_CursorLine->FindObject(m_CursorPos.x, &offset);
+ wxLayoutLine *lineCur = m_CursorLine;
+ for ( wxLOiterator i = lineCur->FindObject(m_CursorPos.x, &offset);
n != 0;
n > 0 ? i++ : i-- )
{
if ( i == NULLIT )
- return false;
+ {
+ if ( n > 0 )
+ {
+ // moving forward, pass to the first object of the next line
+ moveDistance++;
+ lineCur = lineCur->GetNextLine();
+ if ( lineCur )
+ i = lineCur->GetFirstObject();
+ }
+ else
+ {
+ // moving backwards, pass to the last object of the prev line
+ moveDistance--;
+ lineCur = lineCur->GetPreviousLine();
+ if ( lineCur )
+ i = lineCur->GetLastObject();
+ }
+
+ if ( i == NULLIT )
+ {
+ // moved to the end/beginning of text
+ return false;
+ }
+
+ offset = -1;
+ }
wxLayoutObject *obj = *i;
+
+ if ( offset == -1 )
+ {
+ // calculate offset: we are either at the very beginning or the very
+ // end of the object, so it isn't very difficult (the only time when
+ // offset is != -1 is for the very first iteration when its value is
+ // returned by FindObject)
+ if ( n > 0 )
+ offset = 0;
+ else
+ offset = obj->GetLength();
+ }
+
if( obj->GetType() != WXLO_TYPE_TEXT )
{
// any visible non text objects count as one word
if ( n > 0 )
{
// can't move further in this text object
- n--;
-
canAdvance = false;
+
+ // still should move over the object border
+ moveDistance++;
+ n--;
}
else if ( offset > 0 )
{
}
}
- n > 0 ? n-- : n++;
+ CoordType moveDelta = p - start - offset;
+ if ( (n < 0) && (offset == tobj->GetLength() - 1) )
+ {
+ // because we substracted 1 from offset in this case above, now
+ // compensate for it
+ moveDelta--;
+ }
+
+ if ( moveDelta != 0 )
+ {
+ moveDistance += moveDelta;
- moveDistance = p - start - offset;
+ n > 0 ? n-- : n++;
+ }
}
}
- // except for the first iteration, offset is 0
- offset = 0;
+ // except for the first iteration, offset is calculated in the beginning
+ // of the loop
+ offset = -1;
}
MoveCursorHorizontally(moveDistance);
wxLayoutList::LineBreak(void)
{
wxASSERT(m_CursorLine);
- bool setFirst = (m_CursorLine == m_FirstLine && m_CursorPos.x == 0);
AddCursorPosToUpdateRect();
height = m_CursorLine->GetHeight();
m_CursorLine = m_CursorLine->Break(m_CursorPos.x, this);
- if(setFirst) // we were at beginning of first line
+ if(m_CursorLine->GetPreviousLine() == NULL)
m_FirstLine = m_CursorLine;
- wxASSERT(m_FirstLine);
- if(m_CursorPos.x != 0)
+ if(m_CursorPos.x > 0)
m_CursorPos.y++;
m_CursorPos.x = 0;
-
// The following code will produce a height which is guaranteed to
// be too high: old lineheight + the height of both new lines.
// We can probably drop the old line height and start with height =
{
// only draw if between top and bottom:
if((top == -1 ||
- line->GetPosition().y + line->GetHeight() >= top))
+ line->GetPosition().y + line->GetHeight() > top))
{
// if(! style_set)
{
ApplyStyle(line->GetStyleInfo(), dc);
style_set = true;
}
+ // little condition to speed up redrawing:
+ if(bottom != -1
+ && line->GetPosition().y+line->GetHeight() >= bottom)
+ break;
line->Draw(dc, this, offset);
}
- // little condition to speed up redrawing:
- if(bottom != -1 && line->GetPosition().y > bottom) break;
line = line->GetNextLine();
}
InvalidateUpdateRect();
bool *found)
{
// First, find the right line:
- wxLayoutLine *line = m_FirstLine;
+ wxLayoutLine
+ *line = m_FirstLine,
+ *lastline = m_FirstLine;
wxPoint p;
ApplyStyle(m_DefaultStyleInfo, dc);
p = line->GetPosition();
if(p.y <= pos.y && p.y+line->GetHeight() >= pos.y)
break;
-#if 0
- // we need to run a layout here to get font sizes right :-(
-
- // VZ: we can't call Layout() from here because it marks the line as
- // clean and it is not refreshed when it's called from wxLayoutList::
- // Layout() - if we really need to do this, we should introduce an
- // extra argument to Layout() to prevent the line from MarkClean()ing
- // itself here
- line->Layout(dc, this);
-#endif
+ lastline = line;
line = line->GetNextLine();
}
- if(line == NULL)
+
+ bool didFind = line != NULL;
+
+ if ( !line )
{
- if(found) *found = false;
- return NULL; // not found
+ // use the last line:
+ line = lastline;
}
- if(cursorPos) cursorPos->y = line->GetLineNumber();
+
+ if ( cursorPos )
+ cursorPos->y = line->GetLineNumber();
+
+ bool foundinline = true;
// Now, find the object in the line:
- wxLOiterator i = line->FindObjectScreen(dc, pos.x,
- cursorPos ? & cursorPos->x : NULL ,
- found);
+ wxLOiterator i = line->FindObjectScreen(dc, this,
+ pos.x,
+ cursorPos ? &cursorPos->x : NULL,
+ &foundinline);
+ if ( found )
+ *found = didFind && foundinline;
+
return (i == NULLIT) ? NULL : *i;
}
#else // !WXLAYOUT_USE_CARET
dc.SetBrush(*wxWHITE_BRUSH);
//FIXME: wxGTK XOR is borken at the moment!!!dc.SetLogicalFunction(wxXOR);
- dc.SetLogicalFunction(wxXOR);
dc.SetPen(wxPen(*wxBLACK,1,wxSOLID));
if(active)
{
+ dc.SetLogicalFunction(wxXOR);
dc.DrawRectangle(coords.x, coords.y,
m_CursorSize.x, m_CursorSize.y);
SetUpdateRect(coords.x, coords.y);
}
else
{
+ dc.SetLogicalFunction(wxCOPY);
dc.DrawLine(coords.x, coords.y+m_CursorSize.y-1,
coords.x, coords.y);
SetUpdateRect(coords.x, coords.y+m_CursorSize.y-1);
return;
}
+ // We now know that the two lines are different:
wxLayoutLine
- * firstLine = NULL,
- * lastLine = NULL;
-
- for(firstLine = m_FirstLine;
- firstLine && firstLine->GetLineNumber() < m_Selection.m_CursorA.y;
- firstLine=firstLine->GetNextLine())
- ;
- if(!firstLine || firstLine->GetLineNumber() != m_Selection.m_CursorA.y)
- return;
-
-
- for(lastLine = m_FirstLine;
- lastLine && lastLine->GetLineNumber() < m_Selection.m_CursorB.y;
- lastLine=lastLine->GetNextLine())
- ;
- if(!lastLine || lastLine->GetLineNumber() != m_Selection.m_CursorB.y)
- return;
-
-
- // We now know that the two lines are different:
+ * firstLine = GetLine(m_Selection.m_CursorA.y),
+ * lastLine = GetLine(m_Selection.m_CursorB.y);
// First, delete what's left of this line:
MoveCursorTo(m_Selection.m_CursorA);
DeleteToEndOfLine();
- wxLayoutLine *nextLine = firstLine->GetNextLine();
+ wxLayoutLine *prevLine = firstLine->GetPreviousLine(),
+ *nextLine = firstLine->GetNextLine();
while(nextLine && nextLine != lastLine)
nextLine = nextLine->DeleteLine(false, this);
// Now nextLine = lastLine;
Delete(1); // This joins firstLine and nextLine
- Delete(m_Selection.m_CursorB.x); // This deletes the first x
- // positions
+ Delete(m_Selection.m_CursorB.x); // This deletes the first x positions
- /// Recalculate:
- firstLine->RecalculatePositions(1, this);
+ // Recalculate the line positions and numbers but notice that firstLine
+ // might not exist any more - it could be deleted by Delete(1) above
+ wxLayoutLine *firstLine2 = prevLine ? prevLine->GetNextLine() : m_FirstLine;
+ firstLine2->RecalculatePositions(1, this);
}
/// Starts highlighting the selection
int top, bottom;
top = (page - 1)*m_PrintoutHeight;
bottom = top + m_PrintoutHeight;
+
+ WXLO_DEBUG(("OnPrintPage(%d) printing from %d to %d", page, top,
+ bottom));
// SetDeviceOrigin() doesn't work here, so we need to manually
// translate all coordinates.
wxPoint translate(m_Offset.x,m_Offset.y-top);
float scale = ScaleDC(&psdc);
psdc.GetSize(&m_PageWidth, &m_PageHeight);
- // This sets a left/top origin of 15% and 20%:
- m_Offset = wxPoint((15*m_PageWidth)/100, m_PageHeight/20);
+
+ // This sets a left/top origin of 15% and 5%:
+ m_Offset = wxPoint((15*m_PageWidth)/100, (5*m_PageHeight)/100);
// This is the length of the printable area.
- m_PrintoutHeight = m_PageHeight - (int) (m_PageHeight * 0.15);
+ m_PrintoutHeight = m_PageHeight - 2*m_Offset.y;
m_PrintoutHeight = (int)( m_PrintoutHeight / scale); // we want to use the real paper height
-
+#if 0
+ // We should really use the margin settings of wxWindows somehow.
+ m_Offset = wxPoint(0,0);
+ // This is the length of the printable area.
+ m_PrintoutHeight = m_PageHeight;
+ m_PrintoutHeight = (int)( m_PrintoutHeight / scale); // we want to use the real paper height
+#endif
+
m_NumOfPages = 1 +
(int)( m_llist->GetSize().y / (float)(m_PrintoutHeight));
projects / wxWidgets.git / blobdiff