Check for buffer being big enough in wxPathOnly().

[wxWidgets.git] / src / png / INSTALL

diff --git a/src/png/INSTALL b/src/png/INSTALL
index bf86330ba385670ef2897ecab2bda5f6be507346..f987378009856bde14e8c371a6852799d2fa2d4d 100644 (file)
--- a/src/png/INSTALL
+++ b/src/png/INSTALL
@@ -1,5 +1,5 @@
 
 

-Installing libpng version 1.2.20 - September 8, 2007
+Installing libpng

 
 On Unix/Linux and similar systems, you can simply type
 
 
 On Unix/Linux and similar systems, you can simply type
 


@@ -9,14 +9,20 @@ On Unix/Linux and similar systems, you can simply type
 
 and ignore the rest of this document.
 
 
 and ignore the rest of this document.
 

-If configure does not work on your system and you have a reasonably
-up-to-date set of tools, running ./autogen.sh before running ./configure
-may fix the problem.  You can also run the individual commands in
-autogen.sh with the --force option, if supported by your version of
-the tools.  If you run 'libtoolize --force', though, this will replace
-the distributed, patched, version of ltmain.sh with an unpatched version
-and your shared library builds may fail to produce libraries with the
-correct version numbers.
+If configure does not work on your system, or if you have a need to
+change configure.ac or Makefile.am, and you have a reasonably
+up-to-date set of tools, running ./autogen.sh in a git clone before
+running ./configure may fix the problem.  To be really sure that you
+aren't using any of the included pre-built scripts, you can do this:
+
+    ./configure --enable-maintainer-mode
+    make maintainer-clean
+    ./autogen.sh --maintainer --clean
+    ./autogen.sh --maintainer
+    ./configure [--prefix=/path] [other options]
+    make
+    make install
+    make check

 
 Instead, you can use one of the custom-built makefiles in the
 "scripts" directory
 
 Instead, you can use one of the custom-built makefiles in the
 "scripts" directory


@@ -25,14 +31,10 @@ Instead, you can use one of the custom-built makefiles in the
     make test
     make install
 
     make test
     make install
 

-Or you can use one of the "projects" in the "projects" directory.
-
-If you want to use "cmake" (see www.cmake.org), copy CMakeLists.txt
-from the "scripts" directory to this directory and type
+The files that are presently available in the scripts directory
+are listed and described in scripts/README.txt.

 
 

-   cmake . [-DPNG_MMX=YES] -DCMAKE_INSTALL_PREFIX=/path
-   make
-   make install
+Or you can use one of the "projects" in the "projects" directory.

 
 Before installing libpng, you must first install zlib, if it
 is not already on your system.  zlib can usually be found
 
 Before installing libpng, you must first install zlib, if it
 is not already on your system.  zlib can usually be found


@@ -43,9 +45,29 @@ If your system already has a preinstalled zlib you will still need
 to have access to the zlib.h and zconf.h include files that
 correspond to the version of zlib that's installed.
 
 to have access to the zlib.h and zconf.h include files that
 correspond to the version of zlib that's installed.
 

+If you wish to test with a particular zlib that is not first in the
+standard library search path, put ZLIBLIB, ZLIBINC, CPPFLAGS, LDFLAGS,
+and LD_LIBRARY_PATH in your environment before running "make test"
+or "make distcheck":
+
+ZLIBLIB=/path/to/lib export ZLIBLIB
+ZLIBINC=/path/to/include export ZLIBINC
+CPPFLAGS="-I$ZLIBINC" export CPPFLAGS
+LDFLAGS="-L$ZLIBLIB" export LDFLAGS
+LD_LIBRARY_PATH="$ZLIBLIB:$LD_LIBRARY_PATH" export LD_LIBRARY_PATH
+
+If you are using one of the makefile scripts, put ZLIBLIB and ZLIBINC
+in your environment and type "make ZLIBLIB=$ZLIBLIB ZLIBINC=$ZLIBINC test".
+
+If you want to use "cmake" (see www.cmake.org), type
+
+   cmake . -DCMAKE_INSTALL_PREFIX=/path
+   make
+   make install
+

 You can rename the directories that you downloaded (they
 You can rename the directories that you downloaded (they

-might be called "libpng-1.2.20" or "lpng109" and "zlib-1.2.1"
-or "zlib121") so that you have directories called "zlib" and "libpng".
+might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.7"
+or "zlib127") so that you have directories called "zlib" and "libpng".

 
 Your directory structure should look like this:
 
 
 Your directory structure should look like this:
 


@@ -55,19 +77,26 @@ Your directory structure should look like this:
           README
           *.h
           *.c
           README
           *.h
           *.c

+          CMakeLists.txt    =>  "cmake" script
+          configuration files:
+             configure.ac, configure, Makefile.am, Makefile.in,
+             autogen.sh, config.guess, ltmain.sh, missing, libpng.pc.in,
+             libpng-config.in, aclocal.m4, config.h.in, config.sub,
+             depcomp, install-sh, mkinstalldirs, test-pngtest.sh

           contrib
              gregbook
           contrib
              gregbook

+             libtests
+             pngminim

              pngminus
              pngsuite
              visupng
           projects
              pngminus
              pngsuite
              visupng
           projects

-             beos
-             c5builder (Borland)
-             visualc6 (msvc)
-             netware.txt
-             wince.txt
+             visualc71
+             vstudio

           scripts
              makefile.*
           scripts
              makefile.*

+             *.def (module definition files)
+             etc.

           pngtest.png
           etc.
       zlib
           pngtest.png
           etc.
       zlib


@@ -82,80 +111,13 @@ distribution of libpng.  It is available in both tar.gz (UNIX style line
 endings) and zip (DOS style line endings) formats.
 
 If you are building libpng with MSVC, you can enter the
 endings) and zip (DOS style line endings) formats.
 
 If you are building libpng with MSVC, you can enter the

-libpng projects\visualc6 directory and follow the instructions in
-projects\visualc6\README.txt.
+libpng projects\visualc6 or visualc71 directory and follow the instructions
+in README.txt.

 
 

-You can build libpng for WindowsCE by downloading and installing
-the projects\wince directory as instructed in the projects\wince.txt file, and
-then following the instructions in the README* files.  Similarly, you can
-build libpng for Netware or Beos as instructed in projects\netware.txt
-or projects\beos.
-
-Else enter the zlib directory and follow the instructions in zlib/README,
+Otherwise enter the zlib directory and follow the instructions in zlib/README,

 then come back here and run "configure" or choose the appropriate
 makefile.sys in the scripts directory.
 
 then come back here and run "configure" or choose the appropriate
 makefile.sys in the scripts directory.
 

-The files that are presently available in the scripts directory
-include
-
- CMakeLists.txt    =>  "cmake" script
- makefile.std      =>  Generic UNIX makefile (cc, creates static libpng.a)
- makefile.elf      =>  Linux/ELF makefile symbol versioning,
-                       gcc, creates libpng12.so.0.1.2.20)
- makefile.linux    =>  Linux/ELF makefile
-                       (gcc, creates libpng12.so.0.1.2.20)
- makefile.gcc      =>  Generic makefile (gcc, creates static libpng.a)
- makefile.knr      =>  Archaic UNIX Makefile that converts files with
-                       ansi2knr (Requires ansi2knr.c from
-                       ftp://ftp.cs.wisc.edu/ghost)
- makefile.aix      =>  AIX/gcc makefile
- makefile.cygwin   =>  Cygwin/gcc makefile
- makefile.darwin   =>  Darwin makefile, can use on MacosX
- makefile.dec      =>  DEC Alpha UNIX makefile
- makefile.freebsd  =>  FreeBSD makefile
- makefile.hpgcc    =>  HPUX makefile using gcc
- makefile.hpux     =>  HPUX (10.20 and 11.00) makefile
- makefile.hp64     =>  HPUX (10.20 and 11.00) makefile, 64-bit
- makefile.ibmc     =>  IBM C/C++ version 3.x for Win32 and OS/2 (static)
- makefile.intel    =>  Intel C/C++ version 4.0 and later
- libpng.icc        =>  Project file for IBM VisualAge/C++ version 4.0 or later
- makefile.netbsd   =>  NetBSD/cc makefile, uses PNGGCCRD, makes libpng.so.
- makefile.ne12bsd  =>  NetBSD/cc makefile, uses PNGGCCRD,
-                       makes libpng12.so
- makefile.openbsd  =>  OpenBSD makefile
- makefile.sgi      =>  Silicon Graphics IRIX makefile (cc, creates static lib)
- makefile.sggcc    =>  Silicon Graphics (gcc,
-                       creates libpng12.so.0.1.2.20)
- makefile.sunos    =>  Sun makefile
- makefile.solaris  =>  Solaris 2.X makefile (gcc,
-                       creates libpng12.so.0.1.2.20)
- makefile.solaris-x86 =>  Solaris/intelMMX 2.X makefile (gcc,
-                       creates libpng12.so.0.1.2.20)
- makefile.so9      =>  Solaris 9 makefile (gcc,
-                       creates libpng12.so.0.1.2.20)
- makefile.32sunu   =>  Sun Ultra 32-bit makefile
- makefile.64sunu   =>  Sun Ultra 64-bit makefile
- makefile.sco      =>  For SCO OSr5  ELF and Unixware 7 with Native cc
- makefile.mips     =>  MIPS makefile
- makefile.acorn    =>  Acorn makefile
- makefile.amiga    =>  Amiga makefile
- smakefile.ppc     =>  AMIGA smakefile for SAS C V6.58/7.00 PPC compiler
-                       (Requires SCOPTIONS, copied from scripts/SCOPTIONS.ppc)
- makefile.atari    =>  Atari makefile
- makefile.beos     =>  BEOS makefile for X86
- makefile.bor      =>  Borland makefile (uses bcc)
- makefile.bc32     =>  32-bit Borland C++ (all modules compiled in C mode)
- makefile.tc3      =>  Turbo C 3.0 makefile
- makefile.dj2      =>  DJGPP 2 makefile
- makefile.msc      =>  Microsoft C makefile
- makefile.vcwin32  =>  makefile for Microsoft Visual C++ 4.0 and later
- makefile.os2      =>  OS/2 Makefile (gcc and emx, requires pngos2.def)
- pngos2.def        =>  OS/2 module definition file used by makefile.os2
- makefile.watcom   =>  Watcom 10a+ Makefile, 32-bit flat memory model
- makevms.com       =>  VMS build script
- descrip.mms       =>  VMS makefile for MMS or MMK
- SCOPTIONS.ppc     =>  Used with smakefile.ppc
-

 Copy the file (or files) that you need from the
 scripts directory into this directory, for example
 
 Copy the file (or files) that you need from the
 scripts directory into this directory, for example
 


@@ -165,7 +127,7 @@ scripts directory into this directory, for example
 Read the makefile to see if you need to change any source or
 target directories to match your preferences.
 
 Read the makefile to see if you need to change any source or
 target directories to match your preferences.
 

-Then read pngconf.h to see if you want to make any configuration
+Then read pnglibconf.dfa to see if you want to make any configuration

 changes.
 
 Then just run "make" which will create the libpng library in
 changes.
 
 Then just run "make" which will create the libpng library in


@@ -183,17 +145,26 @@ do that, run "make install" in the zlib directory first if necessary).
 Some also allow you to run "make test-installed" after you have
 run "make install".
 
 Some also allow you to run "make test-installed" after you have
 run "make install".
 

-If you encounter a compiler error message complaining about the
-lines
-      __png.h__ already includes setjmp.h;
-      __dont__ include it again.;
-This means you have compiled another module that includes setjmp.h,
-which is hazardous because the two modules might not include exactly
-the same setjmp.h.  If you are sure that you know what you are doing
-and that they are exactly the same, then you can comment out or
-delete the two lines.  Better yet, use the cexcept interface
-instead, as demonstrated in contrib/visupng of the libpng distribution.
-
-Further information can be found in the README and libpng.txt
+Further information can be found in the README and libpng-manual.txt

 files, in the individual makefiles, in png.h, and the manual pages
 libpng.3 and png.5.
 files, in the individual makefiles, in png.h, and the manual pages
 libpng.3 and png.5.

+
+Using the ./configure script -- 16 December 2002.
+=================================================
+
+The ./configure script should work compatibly with what scripts/makefile.*
+did, however there are some options you might need to add to configure
+explicitly, which previously was done semi-automatically (if you didn't edit
+scripts/makefile.* yourself, that is)
+
+CFLAGS="-Wall -O -funroll-loops \
+-malign-loops=2 -malign-functions=2" ./configure --prefix=/usr/include \
+--with-pkgconfigdir=/usr/lib/pkgconfig --includedir=/usr/include
+
+You can alternatively specify --includedir=/usr/include, /usr/local/include,
+/usr/include/libpng%NN%, or whatever.
+
+If you find that the configure script is out-of-date or is not supporting
+your platform properly, try running autogen.sh to regenerate "configure",
+"Makefile.in", and the other configuration files. Then try configure again.
+